Sage SES875 the Barista Express Manuale utente

the User Guide

B###### / S######

EN QUICK GUIDE

FR GUIDE RAPIDE

IT GUIDA RAPIDA

PT MANUAL RÁPIDO

DE KURZANLEITUNG

NL SNELSTARTGIDS

ES GUÍA RÁPIDA

PL SZYBKI PRZEWODNIK

the Barista Express™

BES875 / SES875

2

2 Sage® Recommends Safety First

6 Components

8 Functions

15 Care & Cleaning

19 Troubleshooting

23 Guarantee

Contents

• The installation of a residual

current safety switch is

recommended to provide

additional safety when using

all electrical appliances.

Safety switches with a rated

operating current not more

than 30mA are recommended.

Consult an electrician for

professional advice.

• Remove and discard any

packaging materials safely,



• To eliminate a choking hazard

for young children, discard the



power plug safely.

• Ensure the product is properly



• This appliance is for household

use only. Do not use the

appliance for anything other

than its intended purpose.

Do not use in moving vehicles

or boats. Do not use outdoors.

Misuse may cause injury.

• Position the appliance on a

stable, heat resistant, level, dry

surface away from the counter

edge, and do not operate on

or near a heat source such as

a hot plate, oven or gas hob.

• Fully unwind the power cord

before operating.

• Do not let the power cord

hang over the edge of a

counter or table. Do not let the

power cord touch hot surfaces

or become knotted.

SAGE®

RECOMMENDS

SAFETY FIRST

At Sage® we are very safety

conscious. We design and

manufacture appliances

with your safety foremost in

mind. We also ask that you

exercise a degree of care

when using any electrical

appliance and adhere to

the following precautions.

READ ALL INSTRUCTIONS

BEFORE USE AND SAVE

FOR FUTURE REFERENCE

• A downloadable version of this

document is also available at

sageappliances.com

• 

time, please ensure that your

electricity supply is the same

as shown on the rating label

on the underside of the

appliance. If you have any

concerns please contact your

local electricity company.

3

EN

• Do not leave the appliance

unattended when in use.

• If the appliance is to be:

- left unattended

- cleaned

- moved

- assembled; or

- stored



machine by pressing the

POWER button to OFF.



the power outlet.

• Regularly inspect the power

cord, plug and actual appliance

for any damage. If found to

be damaged in any way,

immediately cease use of

the appliance and return the

entire appliance to the nearest

authorised Sage Service

Centre for examination,

replacement or repair.

• Keep the appliance and

accessories clean. Follow

the cleaning instructions

provided in this book. Any

procedure not listed in this

instruction booklet should be

performed at an authorised

Sage Service Centre.

• The appliance can be used by

children aged 8 or older and

persons with reduced physical,

sensory or mental capabilities

or a lack of experience and

knowledge, only if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved.

• Children should not play with

the appliance.

• Cleaning of the appliance should

not be carried out by children

unless they are 8 years or older

and under adult supervision.

• The appliance and its cord should

be kept out of reach of children

aged 8 years and younger.

• Do not use attachments

other than those provided

with the appliances.

• Do not attempt to operate

the appliance by any method

other than those described

in this booklet.

• Do not move the appliance

whilst in operation.

• Do not use any other liquid

apart from cold mains/town

water. We do not recommend



de-mineralised or distilled water





machine is designed to function.

• Never use the appliance without

water in the water tank.

• 



into the brewing head before

using the machine.

• 

during the brewing operation as

the machine is under pressure.

4

• Do not place anything, other

than cups on top of the

appliance.

• Use caution when operating

machine as metal surfaces are

liable to get hot during use.

• Do not touch hot surfaces.

Allow the product to cool

down before moving or

cleaning any parts.

• Heating element surface

is subject to residual heat

after use.

• The appliance is not intended

to be operated by means of

an external timer or separate

remote-control system.

• Always turn the appliance to



the power outlet and unplug

at the power outlet when the

appliance is not in use.

• Any maintenance other

than cleaning should be

performed by an authorised

Sage® service centre.

• Do not use the appliance on

a sink drain board, wooden or

porous surfaces.

• Do not operate the appliance

if it is in an enclosed space,

or within a cupboard.

• Use caution when descaling

as hot steam may be released.

Before descaling, ensure drip

tray is empty and inserted.

Refer to ‘Care & Cleaning’ for

further instructions.

• Do not operate the grinder

without the hopper lid in



hands, hair, clothing and

utensils away from the

hopper during operation.

SPECIFIC INSTRUCTIONS

FOR WATER FILTER

• Filter cartridge should be kept

out of reach of children.

• 

place in the original packaging.

• Protect cartridges from heat

and direct sunlight.

• Do not use damaged



• 

• If you are absent for a prolonged

period of time, empty the water

tank and replace the cartridge.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

5

EN

The symbol shown

indicates that this appliance

should not be disposed of

in normal household waste.

It should be taken to a local

authority waste collection centre

designated for this purpose or

to a dealer providing this service.

For more information, please



To protect against electric

shock, do not immerse

the power cord, power plug

or appliance in water or any

other liquid.

6

Components

A

B

G

D

H

I

C

E

J

R

K

L

SV

U

T

N

Q

O

F

M

P

```

A. 250g bean hopper

B. Integrated conical burr grinder

C. Grind outlet

D. Grinding activation switch

E. Hands free grinding cradle

F. GRIND SIZE selector

G. GRIND AMOUNT dial

H. FILTER SIZE button

I. POWER button

J. Integrated removable 54mm tamper

K. Group head

 

M. Extra-tall cup clearance for tall mugs

N. 

drip tray

 

P. Dedicated hot water outlet

Q. Steam/Hot Water dial

R. Steam/Hot Water light

S 1 CUP and 2 CUP buttons

T. CLEAN ME light

U. Espresso pressure gauge

V. Programme button

Re-programs the preset 1 CUP

and 2 CUP shot volumes.

Rating Information

7

EN

ACCESSORIES

1. Temp Control™ Milk Jug

2. Cleaning disc

3. Cleaning tablets

 



 

(1 cup & 2 cup) Use when grinding



 

7. Cleaning brush

8. The Razor™ precision dose trimming tool

9. Cleaning tool

10. Allen key

11. Descaling powder

12. The Dosing Funnel™ 54

3

2

5

4

1

6

8

9

10

7

11 12

220–240V ~50Hz 1560–1850W

8

INSTALLING THE WATER FILTER

• 

from the plastic bag.

 

 

• Set the reminder for next month of replacement.



3 months.

 



 



with the adapter inside the water tank.

Push down to lock into place.

• Fill the water tank with cold tap water before

sliding back into position at the back of the

machine and locking into place.

FIRST USE

 

the water tank.

• Fill the water tank with cold water up to the

MAX mark.

• Ensure the hopper is locked into position.

• Plug the power cord into a 230V power outlet.

Press the POWER button to switch the machine



machine is heating.

• Place a large heat proof bowl under the group

head.

NOTE

If the hopper is not correctly locked into position,



1. Press 2 CUP button to run hot water through

the group head.

2. Position the steam wand tip over the drip tray.

Rotate the STEAM / HOT WATER dial to the

STEAM position and run steam through the

steam wand for 10 seconds.

3. Rotate the STEAM/HOT WATER dial

to the HOT WATER position and run water

through the hot water outlet for 10 seconds.

4. Repeat steps 1-3 until the water tank is empty.

Functions

9

EN

GENERAL OPERATION

Setting the Grind Size







We recommend you start at setting 8 and adjust

as required.

Setting the Grind Amount

Set the GRIND AMOUNT dial to the 3 o’clock

position as a starting point. Adjust towards LESS

or MORE as required to adjust the dose amount.











Selecting the Filter Size

• 







• Attach and twist the dosing funnel onto



 

the grinding cradle.

Automatic Dosing

 

the grinding activation switch.

• Grinding will automatically stop, however

if you wish to stop grinding before the cycle



Manual Dosing

 

grinding activation switch. Continue holding



has been dosed.

 



 

• After tamping, remove the dosing funnel from the



NOTE

As a guide to dose, the top edge of the metal cap

on the tamper should be level with the top of the



10



Press the 1 CUP button once to extract

a single shot of espresso at the preset volume

(approx. 30ml).

NOTE

Pressing the 1 CUP or 2 CUP button during

a preset shot volume will immediately stop

the extraction.



Press the 2 CUP button once to extract

a double shot of espresso at the preset volume

(approx. 60ml).

Re-Programming

Shot Volume – 1 CUP or 2 Cup

1. To begin programming, press the Programme

button once.

2. Press 1 CUP or 2 CUP button to start espresso

extraction. Press 1 CUP or 2 CUP button

again once desired volume of espresso has

been extracted. The machine will beep twice

to indicate the new 1 CUP or 2 CUP volume

has been set.

Resetting Default Volumes

To reset the machine to the default 1 CUP

and 2 CUP shot volumes, press and hold the

PROGRAMME button until the machine beeps

three times. Release the PROGRAMME button.

NOTE

Default settings: 1 CUP shot volume is approx.

30ml. 2 CUP shot volume is approx. 60ml.

Trimming the Dose

The Razor™ precision dose trimming tool

allows you to trim the puck to the right level

for a consistent extraction.

• Insert the Razor™ dose trimming tool into the



on the rim of the basket.

• Rotate the Razor™ dose trimming tool back







Purging the Group Head





group head by pressing the 1 CUP button

approximately 5 seconds to get rid of the left

over grind and stabilize the temperature.



WARNING



funnel in the group-head.



rotate the handle towards the centre until

resistance is felt.

11

EN

EXTRACTION GUIDE

Manual Shot Volume

Press and hold the 1 CUP or 2 CUP button.

The extraction will enter low pressure pre-

infusion until the button is released. When the

1 CUP or 2 CUP button is released, extraction

will continue at full pressure. Press the 1 CUP

or 2 CUP button again once the desired volume

of espresso has been extracted.

Within

Espresso Range Under

Espresso Range

• Flow starts after 8–12 secs

• Flow slow like warm honey

• Crema is golden brown with a fine

mousse texture

• Espresso is dark brown

• Extraction takes 25–30 secs

SOLUTIONS SOLUTIONS

Over

Espresso Range

• Flow starts after 1–7 secs

• Flow fast like water

• Crema is thin and pale

• Espresso is pale brown

• Tastes bitter/sharp, weak and watery

• Extraction takes up to 20 secs

• Flow starts after 12 secs

• Flow drips or not at all

• Crema is dark and spotty

• Espresso is very dark brown

• Tastes bitter and burnt

• Extraction takes more than 35 secs

REMOVE USED

GRINDS

Used grinds will form

a coffee ‘puck’. If the

puck is wet, refer to

the ‘Under Extraction’

section.

FILTERSIEB

SPÜLEN

RINSE FILTER

BASKET

Keep the filter basket

clean to prevent

blockages. Without

ground coffee in the

filter basket, lock the

portafilter into the

machine and run hot

water through.

AFTER EXTRACTION

CORRECT EXTRACTION UNDER EXTRACTION OVER EXTRACTION

TURN

Grind Finer

Tamp using 10-15kg

of pressure. The top

edge of metal cap on

the tamper should be

level with the top of the

filter basket AFTER

tamping. Remove the

dosing funnel from the

portafilter then trim the

puck to the right level

using the Razor™

precision dose

trimming tool.

GRIND SIZE

FINER

Adjust & re-test

Grind Coarser

Tamp using 10-15kg

of pressure. The top

edge of metal cap on

the tamper should be

level with the top of the

filter basket AFTER

tamping. Remove the

dosing funnel from the

portafilter then trim the

puck to the right level

using the Razor™

precision dose

trimming tool.

GRIND SIZE

COARSER

Adjust & re-test

TURN

12

• Set the jug to one side. Immediately wipe the

steam wand with a damp cloth. Then, with

the steam wand tip directed over the drip tray,



milk from inside the steam wand.

• Pour milk directly into the espresso.

NOTE

After 5 minutes of continuous steaming, the

machine will automatically disable the steam

function. The STEAM/HOT WATER light will



STANDBY position.

Hot Water

• Turn the STEAM/HOT WATER dial to the

HOT WATER position.

• To stop the hot water, return the dial to the

STANDBY position.

USING THE STEAM / HOT WATER DIAL

Steam

• Position the steam wand tip over the drip tray.

• Turn the STEAM / HOT WATER dial to the

STEAM position. The STEAM / HOT WATER



to create steam.

• When the STEAM/HOT WATER light stops



position.

• Then within 8 seconds, insert the steam wand

tip (1–2cm) below the surface of the milk, close

to the right hand side of the jug at the 3 o’clock

position and quickly turn the dial back to the

STEAM position. Pausing the steam avoids the

milk splashing out of the jug (this pause function

lasts for 8 seconds only).

• The indicator strip on the milk jug will change

colour to highlight the exact milk temperature.

We recommend milk temperature to be between

60-65°C.

• Once the milk is at the correct temperature

(60–65°C), return the dial to the STANDBY

position BEFORE removing the jug.

EXTRACTION GUIDE

TOO

COARSE

UNDER

20 SEC

10-15KG

TOO FINE OVER

35 SEC

TOO MUCH

USE RAZOR

TO TRIM 10-15KG

25-30 SECOPTIMUM 10-15KG

8-11g (1 CUP)

16-19g (2 CUP)

TOO LITTLE

INCREASE DOSE

& USE RAZOR

TO TRIM

OVER EXTRACTED

BITTER • ASTRINGENT

BALANCED

GRIND DOSE TAMP SHOT TIME

UNDER EXTRACTED

UNDERDEVELOPED • SOUR

13

EN

ADVANCED TEMPERATURE MODE

Adjusting Water Temperature

To enter Advanced Temperature Mode:

1. Press the POWER button to switch the



2. Press & hold the PROGRAMME button, then

press the POWER button. The machine will

beep once. The illuminated button will indicate

the current temperature selected. To adjust the

water temperature, press one of the following

buttons within 5 seconds of entering Advanced

Temperature Mode. The machine will beep



are pressed within 5 seconds after entering

Advanced Temperature Mode, no change will

be made & the machine will return to STANDBY

mode.

Default Temperature setting:

In Advanced Temperature Mode,

press the Programme button.



In Advanced Temperature Mode,

press the 1 CUP button.



In Advanced Temperature Mode,

press the 2 CUP button.



In Advanced Temperature Mode,

press the FILTER SIZE button.



In Advanced Temperature Mode,

press the POWER button.

AUTO OFF MODE

The machine automatically switches

to AUTO OFF mode after 30 minutes

as per compliance regulations.

14

ADJUSTING CONICAL BURRS



A feature of the Barista Express™ is the ability to extend this range with an adjustable upper burr.

We recommend making only one adjustment at a time.

Lock upper burr

Hold hopper over container & turn

dial to release beans into container Align hopper

into position Run grinder

until empty Remove hopperUnlock hopper

Move adjustable

top burr, 1 number,

coarser or ﬁner

Remove wire

handle from both

sides of the burr

Align the number

with the handle

opening

Remove upper

burr

Insert wire

handle from both

sides of the burr

Push upper burr

ﬁrmly into

position

Align hopper

into position

Lock hopper Check your

extraction

15

EN

Care & Cleaning

Soak lter

for 5 min

Ensure parts are

connected

Install lter in tank Install water tankSet current month

1

Replace lter after

90 days or after 40L

!

22 3 54



of scale build-up in and on many of the inner

functioning components. Replacing the water



the need to descale the machine.

The limitation of 40L is based on water hardness

level 4. If you are in level 2 area, you can increase

this to 60L.

WARNING

After regular use, hard water can cause mineral

build up in and on many of the inner functioning



temperature, power of the machine, and taste

of the espresso.

CLEANING CYCLE

The CLEAN ME light will illuminate when a

cleaning cycle is required. This is separate from

descaling.

1. 



disc, followed by 1 cleaning tablet.

2. 

3. 

and the drip tray is empty.

4. Press the POWER button to switch the



5. Press the 1 CUP and 2 CUP buttons

simultaneously, then also press the POWER

button. Hold all 3 buttons together for

approximately 3 seconds.

6. The cleaning cycle will commence and last

for approximately 5 minutes. During this







cleaning disc is without a hole in the middle,

hardly any or no water should come through



7. 

has completely dissolved. If the tablet has

not dissolved; repeat from step 4 of the

cleaning cycle until the tablet is dissolved.

8. Once the tablet has completely dissolved,

remove the cleaning disc, reinsert the



rinse the brew head. We recommend to



to avoid water splashing onto the machine.



splashes with a soft dry cloth.

DESCALING

NOTE



water tank before adding the descaling powder

when descaling the machine.

NOTE

The machine will not automatically prompt

a reminder when it is time to run a descaling

cycle. While the cleaning cycle is important for



the descaling cycle is essential to ensure that

the machine is kept clean on the inside and

free from mineral build-up.It is recommended

REPLACING THE WATER FILTER

16

to descale your unit every 90 days when water

hardness is at level 4; and when water hardness

is at level 6, descale your unit every 60 days.

WARNING

Do not immerse power cord, power plug

or appliance in water or any other liquid.

The water tank should never be removed

or completely emptied during descaling.

NOTE

Do not use bottled water when descaling.

Most bottled water may contain dissolved solids

that can leave deposits inside the machine.

Priming machine for descaling function

1. Fully dissolve one sachet of Sage descaling



the water tank (start process after fully dissolving

the powder).

2. Press and hold the 2 CUP button and

then press and hold the POWER button

simultaneously to enter the Descale mode.

The unit will heat up as part of commencing

the descaling action, during the heating



continuously. The machine will indicate it is

ready for descaling when the POWER button,

1 CUP button, CLEAN ME indicator and HOT

WATER / STEAM indicator are all illuminated

(solid on).



3. Press the 1 CUP button to start the





takes approximately 25 seconds. The 1 CUP



constant once the descaling process has



25 seconds, press the 1 CUP button again.

Descale the steam and hot water

components

Descaling steam and hot water takes

approximately 13 seconds and 8 seconds

respectively. Descaling can be terminated

prematurely by turning the steam dial to STANDBY.

4. Descale Steam component by turning

the steam dial LEFT towards the STEAM icon.

5. Descale Hot water component by turning the

steam dial to the RIGHT towards the HOT

WATER icon.

Repeat processes to complete descaling

After the above processes about half

(0.5 litre) of the descale solution should

be left in the water tank.

6. Repeat steps 4-6 above to complete the

descaling process to empty the solution

in the tank.

Descaling Solution Rinse

7. After descaling, remove the water tank and



to the maximum capacity (2 litres) and repeat

steps 4-6 to further cleanse the machine of any

residue of the cleaning solution thoroughly.

8. Press ‘POWER’ to quit the descaling process.

This will be indicated by the LED lights



NOTE



is no action for 5 minutes in descaling mode.

To resume descaling, please start from step 3.

17

EN

ADVANCED CLEANING FOR THE CONICAL BURR GRINDER

Set ‘GRIND SIZE’ to ‘1’

(finest)

Use 10mm socket.

Rotate ‘Clockwise’ to loosen

the nut only

Set ‘GRIND SIZE’ to ‘16’

(coarsest)

Unlock & remove top burr Remove nut, spring & flat

washer. Carefully remove

lower burr

Remove hopper

1 2 3 4 6

Clean chute with brush Insert washers & grind fan

using long-nose pliers

Insert lower burr (drive pin

& cavity to align). Insert

flat washer & spring washer

Rotate ‘Counter-Clockwise’

to tighten nut

Unblock the grinds exit

chute using the brush

or a pipe cleaner

8 9 10 11 12

Insert & lock top burr

13

Set ‘GRIND SIZE’ to ‘5’.

Replace & lock hopper

14

SINGLE DOUBLE

PUSH TO GRIND

Remove grind fan & washers

using long-nose pliers

7

POWER FILTER SIZE

GRIND AMOUNT

GRIND SIZE

LOOSEN NUT

TIGHTEN NUT

GRIND SIZE SPRING

WASHER

FLAT

WASHER

GRIND SIZE

1. GRIND FAN

2. METAL WASHER

3. FELT WASHER

3

2

1

1.

FELT WASHER

2. METAL WASHER

3.

GRIND FAN

1

2

3

SPRING

WASHER

FLAT

WASHER

5

WARNING

Care should be taken as the grinder burrs

are extremely sharp.

This step is only required if there is a blockage between the grinding burrs and the grinder outlet.

CLEANING THE STEAM WAND

The steam wand should always be cleaned after

texturing milk. Wipe the steam wand with a damp

cloth. Then with the steam wand tip directed over



dial to the STEAM position. This will clear any

remaining milk from inside the steam wand.

If any of the holes in the tip of the steam wand

become blocked, ensure the STEAM / HOT

WATER dial is in the STANDBY position. Press



and allow to cool. Use the pin on the end of the

provided cleaning tool to unblock the hole(s).

If the steam wand remains blocked, remove the

tip using the integrated spanner in the cleaning

tool and soak in hot water. Use the pin on the end

of the provided cleaning tool to unblock the hole(s)

before re-attaching to the steam wand.

CLEANING THE FILTER BASKETS

AND PORTAFILTER



under hot water immediately after use to remove





blocked, use the pin on the end of the provided

cleaning tool to unblock the hole(s).

If the hole(s) remain blocked, dissolve a cleaning





Rinse thoroughly.

CLEANING THE SHOWER SCREEN

The group head interior and shower screen

should be wiped with a damp cloth to remove any



Periodically purge the machine. Place an empty



Press and hold the 1 CUP button and run a short



CLEANING THE DRIP &

STORAGE TRAY

The drip tray should be removed, emptied and

cleaned at regular intervals, particularly when the

drip tray full indicator is showing EMPTY ME!





grounds. The EMPTY ME! indicator can also be

removed from the drip tray by pulling upwards

to release the side latches. Wash all parts in

warm soapy water with a soft cloth. Rinse and

dry thoroughly.

18

The storage tray (located behind the drip tray)

can be removed and cleaned with a soft, damp

cloth. Do not use abrasive cleansers, pads

or cloths which can scratch the surface.

NOTE

All parts should be cleaned by hand using warm

water and a gentle dish washing liquid. Do not

use abrasive cleansers, pads or cloths which

can scratch the surface. Do not clean any of the

parts or accessories in the dishwasher.

CLEANING THE OUTER HOUSING

& CUP WARMING TRAY

The outer housing and cup warming tray can

be cleaned with a soft, damp cloth. Polish with

a soft, dry cloth. Do not use abrasive cleansers,

pads or cloths which can scratch the surface.

STORING YOUR MACHINE

Before storing, ensure the STEAM / HOT

WATER dial is in the STANDBY position,

press the POWER button to switch the machine



Remove unused beans from the hopper,

clean the grinder (see page 17), empty

the water tank and the drip tray.

USING THE ALLEN KEY

Over time, the silicone seal surrounding

the shower screen will need to be replaced

to ensure optimum brewing performance.

1. Press the POWER button to switch the



power outlet.

2. Carefully remove the water tank and drip tray,

taking particular care if they are full.

3. Using a skewer or similar, clean the centre



4. Insert the shorter end of the Allen Key into

the centre of the screw. Turn counter-clockwise

to loosen the screw.

WARNING

Do not immerse power cord, power plug

or appliance in water or any other liquid.

5. Once loosened, carefully remove and retain

the screw, stainless steel shower screen.

Make note of the side of the shower screen

and dispersion plate that are facing downwards.

This will make re-assembly easier. Wash the

shower screen in warm soapy water, then dry

thoroughly.

6. 

or a pair of long-nose pliers. Insert the new seal,



7. Re-insert the shower screen, then the screw.



for 2-3 revolutions then insert the Allen Key



shower screen.

8. Re-insert the drip tray and water tank.

Contact Sage Customer Service or visit

sageappliances.com for replacement

silicone seals or for advice.

Clean centre of screw



19

EN

PROBLEM POSSIBLE CAUSE WHAT TO DO

Machine does

not heat up.

STEAM/HOT

WATER light



the machine

is turned on.

• STEAM / HOT WATER dial is not in

the STANDBY position. • Turn the STEAM / HOT WATER dial to the STANDBY

position. Machine will commence heating.

Water does



from the

group head.

No hot water.

• Machine has not reached operating

temperature. • Allow time for the machine to reach operating



and all button lights on the control panel

will illuminate when ready.

• Water tank is empty. • Fill tank.

• Water tank is not fully inserted

and locked into position. • Push water tank down completely to lock into place.

• Machine needs to be descaled. • Refer to ‘Descaling’, page 15.

• 





is blocked.

• 

spouts or not at all’.

Espresso only

drips from



spouts or

not at all.

•  • Use slightly coarser grind. Refer to ‘Setting the

Grind Size’, page 9 and ‘Over Extraction’, page 11.

•  • 

Amount’, page 9 and ‘Over Extraction’, page 11.

•  • Tamp between 10–15kg of pressure.

• Water tank is empty. • Fill tank.

• Water tank is not fully inserted and

locked into position. • Push water tank down completely to lock into place.

•  • Use the pin on the end of the provided cleaning tool

to unblock the hole(s). If the hole(s) remain blocked,





20 minutes. Rinse thoroughly.

• Machine needs to be descaled. • Refer to ‘Descaling’, page 15.

Espresso

runs out too

quickly.

•  • 

page 9 and ‘Under Extraction’, page 11.

• 

basket. • 

Amount’, page 9 and ‘Under Extraction’, page 11.

•  • Tamp between 10-15 kg of pressure.



the Dosing Funnel™ 54

EUK

20

PROBLEM POSSIBLE CAUSE WHAT TO DO

Espresso runs

out around the

edge of the



• 

in the group head correctly. • 

until resistance is felt.

• 

grounds around the



• 

to ensure a proper seal in group head.

•  • Tamp between 10-15kg of pressure.

•  • 

Amount’, page 9.

• The silicone seal surrounding the

shower screen needs to be replaced



secured into the group head.

• Refer to ‘Using the Allen Key’, page 18.

No steam. • Machine has not reached operating

temperature. • Allow time for the machine to reach operating

temperature. The STEAM / HOT WATER light will



steam. During this time, condensed water may purge

from the steam wand. This is normal. When the



wand is ready for use.

• Water tank is empty. • Fill tank.

• Water tank is not fully inserted

and locked into position. • Push water tank down completely to lock into place.

• Machine needs to be descaled. • Refer to ‘Descaling’, page 15.

• Steam wand is blocked. • Refer to ‘Cleaning the Steam Wand’, page 17.

• STEAM/HOT WATER dial is not

in the STEAM position. • Ensure the STEAM / HOT WATER dial is completely

rotated to the STEAM position.



hot enough. • Cups not pre-heated. • Rinse cups under hot water outlet and place

on cup warming tray.

•  • 

Dry thoroughly.

• Milk not hot enough

(if making a cappuccino or latté etc). • Heat milk until side of the jug becomes hot to touch.

• Machine needs to be descaled. • Refer to ‘Descaling’, page 15.

La pagina si sta caricando...

Sage SES875 the Barista Express Manuale utente

Sage SES875 the Barista Express Manuale utente

in altre lingue

Documenti correlati

Altri documenti