Aeg-Electrolux SC81847-4I Manuale utente

User manual

Istruzioni per l’uso

Fridge-Freezer

Frigo-Congelatore

SANTO C 8 18 47-4 i

2

Dear Customer

Thank you for choosing one of our high-quality products.

With this appliance you will experience the perfect combination of func-

tional design and cutting edge technology.

Convince yourself that our appliances are engineered to deliver the best

performance and control - indeed we are setting the highest standards of

excellence.

In addition to this you find environmental and energy saving aspects as an

integral part of our products.

To ensure optimal and regular performance of your appliance please read

this instruction manual carefully. It will enable you to navigate all processes

perfectly and most efficiently.

To refer to this manual any time you need to, we recommend you to keep

it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this manual

Important information concerning your personal safety and information on

how to avoid damaging the appliance

General information and tips

Environmental information

3

Contents

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Remove transport safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Your refrigerator needs air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Rehingeing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Housing dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Instructions for total built-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Prior to Initial Start–Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Operating and indicator panel Fridge . . . . . . . . . . . . . . . . . . . . . . . . .14

Starting up and temperature regulation . . . . . . . . . . . . . . . . . . . . . . .15

Air recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Interior accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Fresh food refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Operating and indicator panel appliance . . . . . . . . . . . . . . . . . . . . . .18

Starting up and temperature regulation . . . . . . . . . . . . . . . . . . . . . . .19

Freezing and storing frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Preparation of Ice Cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Freezing Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

What to do if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Correcting Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Regulations, Standards, Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . .27

4

Safety

The safety aspects of our refrigerators/freezers comply with accepted tech-

nical standards and the German Appliance Safety Law. Nevertheless, we

consider it our obligation to make you aware of the following safety infor-

mation:

Intended use

• The refrigerator is intended for use in the home. It is suitable for the coo-

ling, freezing and storing of frozen food, as well as for making ice. If the

appliance is used for purposes other than those intended or used incor-

rectly, no liability can be accepted by the manufacturer for any damage

that may be caused.

• Alterations or changes to the freezer are not permitted for reasons of

safety.

• If you use the refrigerator in a commercial application or forpurposes

other than the cooling, freezing or frozen storage of foods,please obser-

ve all valid legal regulations for your application.

Prior to initial start–up

• Check the refrigerator for transport damage. Under no circumstance

should a damaged appliance be plugged in! In the event of damage, please

contact the vendor.

Refrigerant

The refrigerant isobutane (R600a) is contained within the refrigerant circuit

of the appliance, a natural gas with a high level of environmental compa-

tibility, which is nevertheless flammable.

• During transportation and installation of the appliance, be certain that

none of the components of the refrigerant circuit become damaged.

• If the refrigerant circuit should become damaged:

– avoid open flames and sources of ignition;

– thoroughly ventilate the room in which the appliance is situated.

Safety of children

• Packaging (e.g. wraps, polystyrene) can be dangerous for children. There is

a risk of suffocation! Keep packaging material away from children!

• Please make old appliances unusable prior to disposal. Pull out the mains

plug, cut off the mains cable, break or remove spring or boltcatches, if fit-

ted. By doing this you ensure that children cannot lock themselves in the

5

fridge when playing (there is risk of suffocation!)or get themselves into

other dangerous situations.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction con-

cerning use of the appliance by a person responsible for their safety. Chil-

dren should be supervised to ensure that they do not play with the

appliance.

Daily Operation

• Containers with flammable gases or liquids can leak at low temperatures.

There is a risk of an explosion! Do not store any containers with flamma-

ble materials such as, for example, spray cans, fire extinguisher refill car-

tridges etc in the refrigerator/freezer.

• Bottles and cans must not be placed in the freezer compartment. They can

burst when the contents freeze, high carbonate content drinks can even

explode! Never store lemonade, juices, beer, wine, sparkling wine etc. in

the freezer compartment. Exception: high alcohol content spirits can be

stored in the freezer compartment.

• Do not put ice creams or ice cubes in the mouth immediately after remo-

val from the freezer compartment. Very cold ice can freeze to the lips or

tongue and cause injury.

• Do not touch frozen food with wet hands. Your hands could freeze to the

food.

• Do not operate any electrical appliances in the refrigerator/freezer (e.g.

electric ice cream makers, mixers etc.).

• Before cleaning the appliance, always switch off the appliance and unplug

it, or pull the house fuse or switch off the circuit breaker.

• When unplugging always pull the plug from the mains socket, do not pull

on the cable.

In case of malfunction

• If the a malfunction occurs on the appliance, please look first in the "What

to do if ..." section of these instructions. If the information given there

does not help, please do not perform any further repairs yourself.

• Refrigerators/freezers may only be repaired by qualified service engineers.

Improper repairs can give rise to significant hazards. If your appliance

needs repairing, please contact your specialist dealer or our Customer Ser-

vice.

6

Disposal

Appliance Packaging Information

All materials are environmentally sound! They can be dumped or burned at

an incinerating plant without danger!

About the materials: The plastics can be recycled and are identified as fol-

lows:

>PE< for polyethylene, e.g. the outer covering and the bags in the interior.

>PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluo-

rocarbon.

The carton parts are made from recycled paper and should be disposed of

at a waste-paper recycling collection location.

Disposal of old Appliances

For environmental reasons, refrigeration appliances must be disposed of

properly. This applies to your old appliance, and - at the end of its service

life - for your new appliance as well.

Warning! Before disposing of old appliances make them inoperable. Remo-

ve plug from mains, sever the power cable, remove or destroy any snap or

latch closures. This eliminates the danger that playing children lock them-

selves into the appliance (danger of suffocation!) or place themselves into

other life-endangering situations.

Disposal:

• The appliance may not be disposed of with domestic waste or bulky refu-

se.

• The refrigerant circuit, especially the heat exchanger at the back of the

appliance, may not be damaged.

• The symbol on the product or on its packaging indicates that this pro-

duct may not be treated as household waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the environ-

ment and human health, which could otherwise be caused by inappro-

priate waste handling of this product. For more detailed information

about recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the

product.

Remove transport safeguard

The appliance and the interior fittings are protected for transport.

• Pull off the adhesive tape on the left and right side of the door.

• Remove all adhesive tape and packing pieces from the interior of the

appliance.

7

If installation next to a source of heat is unavoidable, the following mini-

mum clearances must be maintained at the sides of the appliance:

– for electric cookers 3 cm;

– for oil and coal fired ranges 30 cm.

If these clearances cannot be maintained a heat insulating pad is required

between the cooker and the refrigeration appliance.

If the refrigeration appliance is installed next to another refrigerator or free-

zer a clearance of 5 cm at the sides is required, in order to prevent the for-

mation of condensation on the outside of the appliance.

Installation

Installation Location

The appliance should be set up in a well ventilated, dry room.

Energy use is affected by the ambient temperature. The appliance should

therefore

– not be exposed to direct sunlight;

– not be installed next to radiators, cookers or other sources of heat;

– only be installed at a location whose ambient temperature corresponds to

the climate classification, for which the appliance is designed.

The climate classification can be found on the serial plate, which is located

at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each

climate classification: each climate classification:

Climate classification for an ambient temperature of

SN +10 bis +32 °C

N +16 bis +32 °C

ST +18 bis +38 °C

T +18 bis +43 °C

8

Your appliance needs air

For safety reasons, minimum ventila-

tionmust be as shown Fig.

Attention: keep ventilation openings

clear of obstruction;

50 mm

min.

200 cm

2

200 cm

2

min.

D567

Rehingeing the door

The side at which the door opens can be changed from the right side (fac-

tory adjustment) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the appliance

may not be connected to the mains. Remove plug from the mains befo-

rehand.

1. Unscrew the upper pin and remove

the spacer

2. Remove the upper door and the

upper hinge pin.

3. Remove the hinge cover (A). Unscrew

the pins (B) and spacers (C). Fit the

hinge cover (A).

4. Unscrew the lower pin and refit it on

the opposite side.

5. Refit the lower door.

6. Refit the pins (B) and the spacers (C)

on the middle hinge on the opposite

side.

B

C

A

9

Housing dimensions

Height 1780 mm

Depth 550 mm

Width 560 mm

7. Refit the upper door , the hinge pin

and the spacer on the opposite side .

Make sure that a distance of 44 mm

is maintained in the lower part bet-

ween the kitchen furniture and the

border of the appliance.

The lower hinge cover inserted in the

accessories bag, is useful to guarantee

the exact position of the kitchen fur-

niture and the appliance.

Also make sure that the appliance

does not clamp the mains cable .

Apply joint the sealing strip as shown

in figure.

Instructions for total built-in

D765

1

2

44m

m

10

I

Fasten the appliance with 4 screws

provided in the kit included with the

appliance.

B

E

D

C

Apply covers (C-D) on joint cover lugs

and into hinge holes.

Snap vent grille (B) and hinge covers

(E) into position.

From the plastic cover (E), which is

used to cover the hinge with the

pivot pin, you must take away the

part as indicated in the drawing.

This operation is made easer since

there is, in the internal part of the

cover hinge lid a groove that facila-

tes the removal of this coomponent.

“Remove the part marked with DX, if

the pivot pin is inserted in the right

hinge, SX in opposite case.”

11

Separate parts Ha, Hb, Hc, Hd as

shown in the figure

PR266

Ha

Hb

Hc

Hd

Place guide (Ha) on the inside part of

the furniture door, up and down as

shown in the figure and mark the

position of external holes. After

having drilled holes, fix the guide

with the screws supplied.

2

1

m

2

1

m

ca. 50 mm

90°

ca. 50 mm

PR33

Hc

Ha

Fix cover (Hc) on guide (Ha) until it

clips into place.

12

Place guide (Ha) on the inside part of

the furniture door, up and down as

shown in the figure and mark the

position of external holes. After

having drilled holes, fix the guide

with the screws supplied.

2

1

m

2

1

m

ca. 50 mm

90°

ca. 50 mm

PR33

Hc

Ha

Fix cover (Hc) on guide (Ha) until it

clips into place.

Open the appliance door and the fur-

niture door at 90°. Insert the small

square (Hb) into guide (Ha). Put

together the appliance door and the

furniture door and mark the holes as

indicated in the figure.

PR167

Ha

Hb

8mm

13

Prior to Initial Start–Up

• Please clean the appliance interior and all accessories prior to initial start-

up (see section: “Cleaning and Care”).

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if sup-

ply voltage and current values correspond with those of the mains at the

installation location.

e.g.: AC 220 ... 240 V 50 Hz or

220 ... 240 V~ 50 Hz

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply. The

supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electrical

installation must include suitable means of isolating the appliance from the

mains (e.g. fuse, cut-out, current trip or similar with a minimum contact

separation of 3 mm).

Attention: The mains connection cable may only be replaced by a skilled

electrician. Please contact your dealer or our customer service department

for repairs.

Open the appliance door and the fur-

niture door at 90°. Insert the small

square (Hb) into guide (Ha). Put

together the appliance door and the

furniture door and mark the holes as

indicated in the figure.

PR167

Ha

Hb

8mm

D735

E

If the appliance is fixed to the

side of the kitchen unit, simply

slacken the screws in the fixing

brackets (E), move the brackets as

shown in the figure and re-tight-

en the screws.

14

Operating and indicator panel Fridge

A. Mains pilot indicator (green)

B Fridge button ON/OFF

C Temperature setting button (for warmer temperatures)

D Temperature display

E Temperature setting button (for colder temperatures)

F DAC function "on" indicator (yellow)

G DAC button

Temperature setting buttons

The temperature is adjusted using the „C“ (+) and „E“ (-) buttons. These but-

tons are connected to the temperature display.

• The temperature display is switched over from the display of the ACTUAL

temperature (Temperature display is illuminated) to the display of the DESI-

RED temperature (Temperature display flashes) by pressing one of the two

buttons, „C“ (+) or „E“ (-).

• Each time one of the two buttons is pressed again the DESIRED temperatu-

re is adjusted by 1 °C. The DESIRED temperature must be reached within 24

hours.

If neither button is pressed, the temperature display automatically switches

back after a short period (approx. 5 sec.) to the display of the ACTUAL tem-

perature.

DESIRED temperature means:

The temperature that has been selected for inside the fridge. The DESIRED

temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the fridge.

The ACTUAL temperature is indicated with illuminated numbers.

15

Temperature display

The temperature display can indicate several pieces of information.

• During normal operation, the temperature currently present in the fridge

(ACTUAL temperature) is displayed.

• When the temperature is being adjusted a flashing display indicates the

fridge temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1. Plug the mains plug into the mains socket.

2. Press ON/OFF button (B) can function the fridge compartment separately

with the appliance in function. The green mains pilot indicator illuminates.

The appliances start.

3. Press either the „C“ (+) or „E“ (-) button. The temperature display switches

over and the DESIRED temperature currently set flashes on the temperatu-

re display.

4. Set the required temperature by pressing the „C“ (+) or „E“ (-) buttons (see

section "Temperature setting buttons"). The temperature display will imme-

diately show the changed setting. Each time the button is pressed the tem-

perature is adjusted by 1 °C.

From a food safety point of view +5 °C should be considered sufficiently

cold for storing food in the fridge.

5. Once the required temperature has been set, after a short period (approx. 5

sec.) the temperature display will change and again indicate the current

ACTUAL temperature inside the fridge. The display will change from flashing

to continuous illumination.

Information! When the setting is changed, the compressor does not start

immediately if automatic defrosting is currently taking place. As the stora-

ge temperature within the fridge is reached quickly you can store food

immediately after switching on.

COOLMATIC

The COOLMATIC function is suited for quick cooling of large quantities of

goods in the refrigerator.

1. The COOLMATIC function is switched on by pressing the button “E” (-)

(several times if necessary) until the word “SC” appears in the display.

The COOLMATIC function now provides for intensive cooling. A DESIRED

temperature of +2 °C is automatically selected. The COOLMATIC function is

ended automatically after a period of 6 hours.

2. The COOLMATIC function can be ended manually at any time by pressing

the Button “C” (+).

16

Interior Accessories

Storage Shelves

The glass shelf above the fruit and

vegetable compartment should

always remain in position, to ensure

fruit and vegetables stay fresh longer.

The remaining storage shelves can be

adjusted to various heights:

Pull the storage shelf forward until it

can be tipped up or down and remo-

ved.

To insert at a different height use the same procedure in reverse.

Adjustment for tall goods:

Remove the front half of the two-part vario glass storage shelf and insert it

at a different level. Space is thus gained for storage of tall goods on the

underlying storage shelf.

Variable Inner Door

The door compartments can be pulled up and removed, and inserted at

other positions as needed.

D338

Air recycling

The refrigerator compartment is

equipped with a special

AIRLIGHT- fan which is activated

by pressing the button “G”. The

yellow light “F” is on and this

means that the fan is working.

It is suggested that the fan

(D.A.C.) be used when the ambi-

ent temperature exceeds 25°C .

This device allows for rapid cool-

ing of foods and a more uniform

temperature in the compartment.

17

Fresh food refrigeration

To obtain the best performance:

• do not store warm food or evaporating liquide in the refrigeator

• do cover or wrap the food, particularly if it has a strong flavour.

• Position food so that air can circuiate freely round it.

Useful hints:

Meat (all types): wrap in polythene bags and place on the glass shelf above the

vegetable drawer(s)For safety, store in this way only one or two days at the

most. Cooked foods, cold dishes, etc: these should be covered and may be

Moisture regulator

There is an adjustable air grille in

front of the shelf above the fruit and

vegetable compartments.

The opening in the ventilation slots

can be adjusted with the slider.

Right slider: Ventilation slots opened.

With the ventilation slots open, more

air circulation results in a lower air

moisture content in the fruit and

vegetable compartments.

Left slider: Ventilation slots closed.

When the ventilation slots are closed,

the natural moisture content of the

food in the fruit and vegetable com-

partments is preserved for longer.

Variable Storage Box

Some models are equipped with a

variable storage box which is fitted

under a door shelf compartment and

can be slid sideways. The box can be

inserted under any door shelf com-

partment.

1. To change the position of the stora-

ge box; lift the shelf compartment

with the box upwards and out of the

holders in the door and remove the

retaining bracket out of the guide

under the shelf compartment.

2. Reverse the above operation to insert

the shelf at a different height.

18

Operating and indicator panel appliance

H. Mains pilot indicator (green)

I. ON/OFF button for the appliance

J. Temperature setting button (for warmer temperatures)

K. Temperature display freezer

L. Temperature setting button (for colder temperatures)

M. FROSTMATIC function "on" indicator (yellow)

N. FROSTMATIC button

O. Alarm reset light

P. Alarm reset button

placed on any shelf.

Fruit and vegetables: these should be thoroughly cleaned and placed in the

special drawer(s) provided.

Butter and cheese: these should be placed in special airtight containers or wap-

ped in aluminium foil or polythene bags to exclude as much air as possible.

Milk bootles: these should have a cap and should be stored in the bottle rack

on the door.

Bananas, potatoes, onions and garlic, if not packed, must not be kept in the

refrigerator.

Temperature setting buttons

The temperature is adjusted using the „J“ and „L“ buttons. These buttons are

connected to the temperature display.

• The temperature display is switched over from the display of the ACTUAL

temperature (Temperature display is illuminated) to the display of the DESI-

RED temperature (Temperature display flashes) by pressing one of the two

buttons, „J” or „L“.

• Each time one of the two buttons is pressed again the DESIRED temperatu-

re is adjusted by 1 °C. The DESIRED temperature must be reached within 24

hours.

If neither button is pressed, the temperature display automatically switches

back after a short period (approx. 5 sec.) to the display of the ACTUAL tem-

perature.

19

DESIRED temperature means:

The temperature that has been selected for inside the freezer. The DESIRED

temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the freezer.

The ACTUAL temperature is indicated with illuminated numbers.

Temperature display

The temperature display can indicate several pieces of information.

• During normal operation, the temperature currently present in the freezer

(ACTUAL temperature) is displayed.

• When the temperature is being adjusted a flashing display indicates the

freezer temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1. Plug the mains plug into the mains socket.

2. Press ON/OFF button (I) for the functioning of the whole appliance. The

green mains pilot indicator illuminates. The alarm light flashes since the

temperature is reached. The buzzer sounds.

3. Pressing button “P” the buzzer stops.

4. Press either the „J“ or „L” button. The temperature display switches over and

the DESIRED temperature currently set flashes on the temperature display.

5. Set the required temperature by pressing the „J“ or „L“ buttons (see section

"Temperature setting buttons"). The temperature display will immediately

show the changed setting. Each time the button is pressed the temperatu-

re is adjusted by 1 °C.

From a food safety point of view -18 °C should be considered sufficiently

cold for storing food in the freezer.

6. The alarm light,when the set temperature is reached. Press the alarm but-

ton to turn off the buzzer.

Ice pack

There is one or more ice packs in one drawer of the freezer.

In the event of a power failure or malfunction, the ice pack will lengthen

the amount of time it takes for the frozen food to become too warm by

several hours. The ice pack can only fulfil this task optimally if it is placed in

the uppermost drawer, at the front, above the frozen food. You can use the

ice pack for cooling cold bags.

20

FROSTMATIC

The FROSTMATIC function accelerates the freezing of fresh food and, at the

same time, protects foodstuffs already stored from undesirable warming.

1. The FROSTMATIC function is switched on by pressing the FROSTMATIC but-

ton. The yellow light illuminates.

If the FROSTMATIC function is not ended manually, the appliance switch off

the FROSTMATIC function after 54 hours. The yellow light goes out.

2. The FROSTMATIC function can be ended manually at any time by pressing

the FROSTMATIC button again. The yellow light goes out.

Alarm reset button

In the event of an abnormal temperature rise inside the freezer (e.g. power

cut) warning light (O) will start to flash and a buzzer will sound.

After the temperature has returned to normal, the warning light (O) will

continue to flash, although the buzzer has stopped.

When the alarm button is pressed, the warmest temperature reached in the

compartment flashes on the indicator.

Switching the Appliance off

The refrigerator compartment can be switched off independently of the

freezer compartment.

By the switching off of the freezer compartment it is switched off also

the refrigerator compartment.

To switch off the refrigerator, hold down the ON/OFF button (B) for the

refrigerator for ca. 5 Sec. .

To switch the appliance off, hold down the ON/OFF button (I) for approx. 5

seconds. This will result in a countdown from "3" to "1" taking place in the

temperature display. On reaching "1" the appliance will switch off. The tem-

perature display will go off.

Note:

The appliance cannot be switched on or off if unplugged, or if there is no

power being supplied to it. Following connection to the mains power sup-

ply, the appliance returns to the same operating state as before the inter-

ruption of main power.

If the appliance is not going to be used for an extended period:

1. Switch off the appliance, holding down the ON/OFF button (I) until the

display goes off (see above).

2. Remove the mains plug or switch off or turn out the circuit breaker or fuse.

3. Defrost the freezer compartment and clean the appliance thoroughly (see

section: “Cleaning and Maintenance”).

4. Finally, leave the doors open so as to avoid a build up of odours.

La pagina sta caricando ...

Aeg-Electrolux SC81847-4I Manuale utente

Aeg-Electrolux SC81847-4I Manuale utente

in altre lingue

Documenti correlati

Altri documenti