Philips 107C64/42 Manuale utente

electronic user's manual

file:///D|/EDFU/crt_17_6/edoc/english/107C/manual.html2005-04-08 ¤W¤È 11:19:34

Safety & Troubleshooting

Safety and Troubleshooting Information

Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other

Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those

specified in this documentation may result in exposure to shock, electrical

hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

● Disconnect the monitor from the power supply if the monitor is not to be used for an

extended period of time.

● Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The

back cover should only be removed by qualified service personnel.

● Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them

and prevent proper cooling of the monitor's electronic devices.

● To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain

or excessive moisture.

● Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a

slightly damp cloth. Disconnect the monitor from the power supply before cleaning.

● When positioning the monitor, make sure the power plug and outlet are easily accessible.

Consult a service technician if the monitor does not operate normally when operating instructions of

this manual are followed.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/SAFETY.HTM2005-04-08 ¤W¤È 11:19:46

About This Electronic User's Manual

About This Guide • Other Documents You May Need • Notational Descriptions

About This Guide

This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes

the monitor's features, setup, operation and all other information, which is the same exact

information described in our printed version.

The sections are as follows:

● Safety and Troubleshooting Information provides tips and solutions for common problems,

and other related information you may need.

● About This Electronic User's Manual gives an overview of what information are included as

well as notation icon descriptions and other documentation you can refer to.

● Product Information gives an overview of the monitor's features and as well as the technical

specifications for this monitor.

● Installing Your Monitor describes the initial setup process and gives an overview of how to

use the monitor.

● On Screen Display provides information on adjusting the settings on your monitor.

● Customer Care and Warranty is a list of worldwide Philips consumer information centers

along with the help desk phone numbers and information on the applicable warranty of your

product.

● Glossary provides more information for technical terms.

● Download allows users to install the entire manual on their hard drive.

● Frequently Asked Questions provides answers to commonly asked questions.

RETURN TO TOP OF THE PAGE

Other Documents You May Need

In addition to this Electronic User's Guide, you may need to refer to the following documentation:

file:///D|/EDFU/crt_17_6/edoc/english/107C/ABOUT/ABOUT.HTM (1 of 3)2005-04-08 ¤W¤È 11:19:46

About This Electronic User's Manual

● Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the

monitor. This is included with this product.

RETURN TO TOP OF THE PAGE

Notational Descriptions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in

italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: This icon indicates important information and tips that help you make

better use of your computer system.

CAUTION: This icon indicates information that tells you how to avoid either

potential damage to hardware or loss of data.

WARNING: This icon indicates the potential for bodily harm and tells you how

to avoid the problem.

SMART HELP: This icon indicates helpful information when adjusting the On

Screen Display of your monitor.

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such

cases, the specific presentation of the warning is mandated by regulatory authority.

file:///D|/EDFU/crt_17_6/edoc/english/107C/ABOUT/ABOUT.HTM (2 of 3)2005-04-08 ¤W¤È 11:19:46

About This Electronic User's Manual

RETURN TO TOP OF THE PAGE

broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V.

file:///D|/EDFU/crt_17_6/edoc/english/107C/ABOUT/ABOUT.HTM (3 of 3)2005-04-08 ¤W¤È 11:19:46

107C Product Information

Product Information

Product Features • LightFrame™ for Windows • Lead-free product • Technical Specifications

•

Automatic Power Saving • Physical Specification • Pin Assignment • Product Views

Product Features

Model Regulation Color

107C63 TCO'03 Silver/Black

107C64 TCO'99 Silver/Black

107C65 TCO'99 Black

107C6

● 17-inch (16.0" VIS) color monitor with excellent front of screen performance for use with

MACs and PCs

● Autoscan covers horizontal frequencies up to 71 kHz offering a maximum resolution of 1280

x 1024 with flicker free display of 1024 x 768 at up to 89 Hz.

● Real Flat High Contrast CRT with high-resolution 0.25 mm dot pitch (0.21 hdp)

● LightFrame™ for brightest and sharpest display of movie and photo windows.

● Large screen display in a small footprint: 17-inch conventional monitor with maximum depth

of only 424 mm/16.7"

● sRGB for true on screen color representation.

● FCC, CE (in selected countries only) and ISO9241, ISO14001 certified

RETURN TO TOP OF THE PAGE

LightFrame™ for Windows

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (1 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

Introduction

Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT

(picture tube) monitor. LightFrame™ will boost the brightness and sharpness of photos and videos

on the monitor screen.

To control the LightFrame™ feature in your monitor, you have to install the LightFrame™ application

which you will find on this CD-ROM.

Note

Philips LightFrame™ will only work with monitors that have been built to use this software. Earlier

Philips monitors or other manufacturers’ monitors will not work with this special software. It is

recommended that you install this software only on a Philips monitor designed to use it. These

monitors can be identified by the LightFrame™ logo on the front of the monitor.

This software is not designed for use with LCD flat screen monitors.

LightFrame™ will work with true Windows-based programs and DOS-based programs that operate

in a Windows environment. It will not work with DOS-based programs operating only in a DOS

environment.

Language Selection

While English is the default language of LightFrame™, the User Interface can be set up to operate

in Dutch, French, German, Italian, Portuguese, Spanish, Simplified Chinese, Traditional Chinese or

Korean.

Installation

1)

To install LightFrame™, place the CD in the CD-ROM drive.

2)

Next, when the menu of items on the CD appears on your screen, click on 'Install

LightFrame™'.

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (2 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

3) Now, follow the on-screen prompts to properly install the program. The software checks to

see if you have a compatible monitor. You must agree to the license agreement terms for the

software to install.

4)

After installation, LightFrame™ automatically loads and the icon appears in the taskbar.

Notes

If LightFrame™ detects that your monitor is not LightFrame™ compatible, a message appears on

the monitor screen. If you see this message, you can select to abort or continue the installation.

However, if you continue the installation, LightFrame™ will probably not work on the monitor.

How to use LightFrame™

After installation, LightFrame™ starts up automatically whenever the computer is started.

For information about using LightFrame™ please refer to the help information which is available

after installation.

Compatibility

This version of LightFrame™ is compatible with

Windows® 95

Windows® 98

Windows® Me (Millenium Edition)

Windows® XP

Windows® 2000 Professional Edition.

LightFrame™ 3 -- Frequently Asked Questions (and answers)

LightFrame™

Q: Is LightFrame™ 2 compatible with LightFrame™ 3?

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (3 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

A: No. If you run LightFrame™ 1 or 2 software with a Philips LightFrame™ 3 monitor, nothing

will happen.

Q:Can I use LightFrame™ 3 software on my LightFrame™ 1 / 2 monitor.

A:No for a LightFrame™ 1 or 2 monitor you need to use LightFrame™ 1 or 2 software. It is however

possible to use the LightFrame™ 2 software on a LightFrame™ 1 monitor.

Q:What is the difference between LightFrame™ 1, LightFrame™ 2 and LightFrame™ 3?

A:LightFrame™ 1 was the very first generation of the LightFrame™ feature introduced by Philips. In

that version the user needs to manually turn on/off the feature and select the window or area to

apply it to.

LightFrame™ 2 offers the automatic detection in Internet Explorer on top of the LightFrame™ 1

functions. With this feature LightFrame™ will automatically scan a web page in Internet Explorer,

find the largest picture and enhance it.

LightFrame™ 3 offers everything that LightFrame™ 2 has but now with the possibility to enhance

multiple pictures at the same time. So in a web page LightFrame™ will find all the pictures and

enhance them simultaneously or in a photo viewing application you can enhance multiple photos at

once. Furthermore LightFrame™ 3 comes with an easy to activate full screen function. This is

especially handy for games and movies. Just one click on the full screen button and LightFrame™

enhances your total monitor.

Q:Can I upgrade my current Philips monitor to LightFrame™ 3?

A:No. For LightFrame™ 3 Philips developed special hardware which is build into the monitor.

Therefore upgrading from LightFrame™ 1 or 2 to 3 is not possible. It is however possible to upgrade

your LightFrame™ 1 monitor to LightFrame™ 2 by installing the LightFrame™ 2 software.

Q:Can I install LightFrame™ 3 over an older version?

A:When you install LightFrame™ 3 the setup wizard will scan your system to check if you have an

older version installed. If so, the setup wizard will remove that version before continuing with the

installation of the new version. Please be aware that for LightFrame™ 3 you also need a monitor

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (4 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

which is capable of running the LightFrame™ 3 feature.

Q:How can I tell which version LightFrame™ my monitor can support?

A:To check which version of LightFrame™ is supported by your monitor check the LightFrame logo

which you will find on the top, right-hand corner of the monitor. If this logo has a small 3 in it, your

monitor is ready for LightFrame™ 3. Otherwise you should use the LightFrame™ 1 or 2 software.

Q: How many windows can I enhance at the same time?

A:In LightFrame™ 3 it is possible to enhance up to 8 windows at the same time. It is however

important to understand that when other windows, toolbars or menus overlap the enhanced

windows, the maximum number of enhanced windows can be less.

Q:How many pictures can LightFrame™ enhance in Internet Explorer?

A:In Internet Explorer LightFrame™ 3 can enhance up to 16 pictures at the same time.

LightFrame™ 3 filters the pictures it finds based on the minimum size of the picture therefore it may

happen that some pictures are not enhanced when you open a web page.

Q:Can I enhance two or more area’s at the same time?

A:Yes. With LightFrame™ 3 you have the possibility to select several windows with pictures and

videos and enhance them at the same time.

Q:Some times my mouse changes to a light bulb with a plus sign and sometimes with a

minus sign. What is the difference?

A:The mouse pointer in the shape of a light bulb indicates that LightFrame™ is ready to accept a

selection from you for which window should be enhanced.

If there is a minus sign it means that you are moving over a window where LightFrame™ is already

active and clicking this window will switch the enhancement off. A plus sign appears when moving

over a window which is not enhanced and clicking that one will enable LightFrame™ on that window.

Q:What is wrong when my mouse changes into a light bulb with a red cross?

A:Nothing. It just means that your mouse moves outside the application where you already have

one or more windows enhanced. You can only select windows with in the same application. The

cross indicates that you move into an area where you cannot make a selection.

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (5 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

Q:Can I use LightFrame™ with Netscape?

A: You can use LightFrame™ with Netscape, but its functions are limited to manually highlighting

the entire Netscape client window. Since LightFrame™ is specifically designed for bright, high

contrast photo and video display, highlighting an entire Web page -- including text -- is not

recommended.

For best results, we recommend you use LightFrame™ with Microsoft Internet Explorer version 5.0

or higher. You can downloaded Internet Explorer free of charge from the Microsoft website (

www.

microsoft.com). A copy of Internet Explorer 5.5 is also included on the CD-ROM shipped with your

monitor.

Q:Can I activate LightFrame™ on my entire screen?

A:Yes you can. And with LightFrame™ 3 this becomes even easier. There are three ways to do this:

1) click the full screen button in the LightFrame control bar with your mouse. 2) Press the "windows"

hotkey on your keyboard and press "L". 3) Via the OSD menu, scroll to Extra controls, press "OK",

then LightFrame On.

Q:When I apply LightFrame™ to a text document I get blurry characters, what is wrong?

A:Nothing is wrong. The effect which you see is due to the sharpness enhancement that

LightFrame™ is doing on your monitor. This sharpness improves a photo or video significantly

however on black text on a light background the effect is less favorable. Please keep in mind that

LightFrame™ is developed to enhance your photos and videos and not really for text or synthetic

pictures.

You can decrease this effect by lowering the sharpness setting in the LightFrame™ 3 control panel.

Q: How can I tell if my monitor comes with LightFrame™ 3?

A: All Philips LightFrame™ 3 monitors display this logo on their front bezel:

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (6 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

RETURN TO TOP OF THE PAGE

Lead-free product

Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your

health and promotes environmentally sound recovery and disposal of waste from electrical and

electronic equipment. Philips complies with the European Community stringent RoHS Directive

mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips,

you can be confident that your display device does not harm the environment.

Technical Specifications*

CRT

• Size and deflection 17 inch / 41 cm ; 90° deflection angle

• Dot pitch 0.25 mm

• Horizontal pitch 0.21 mm

• Tube type

Shadow mask, Real Flat, high contrast, anti-glare, anti-

static, anti reflection

• Phosphor P22

• Recommended display area 12.0" x 9.0" / 306 x 230 mm

• Maximum display area 12.8" x 9.6" / 325 x 244 mm

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (7 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

SCANNING

• Horizontal scanning 30 - 71 KHz

• Vertical scanning 50 - 160 Hz

VIDEO

• Video dot rate 120 MHz

• Input impedance

- Video 75 ohm

- Sync 4.7 kOhm

• Input signal levels 0.7 Vpp

• Sync input signal Separate sync

• Sync polarities Positive and negative

WHITE COLOR TEMPERATURE

Chromaticity CIE coordinates:

• at 9300 degrees K x = 0.283 / y = 0.297

• at 6500 degrees K x = 0.313 / y = 0.329

• at sRGB x = 0.313 / y = 0.329

PRESET MODES

720 x 400 @ 70 Hz

640 x 480 @ 60 Hz

640 x 480 @ 85 Hz

800 x 600 @ 75 Hz

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (8 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

800 x 600 @ 85 Hz

1024 x 768 @ 75 Hz

1024 x 768 @ 85 Hz

1280 x 1024 @ 60 Hz

sRGB

sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.

digital cameras, monitors, printers, scanners, etc.)

Using a standard unified color space, sRGB will help represent pictures taken by an sRGB

compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are

calibrated and you can rely on the correctness of the colors shown on your screen.

Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a

predefined setting as well as the color gamut. Therefore it is important to select the sRGB

setting in the monitor's OSD.

To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down

button to go to Color temperature and press OK again. Then move the down button to go to

sRGB and press OK again.

Exit this OSD.

After this, please don't change the brightness or contrast setting of your monitor. If you change

either of these, the monitor will exit the sRGB mode and go to a color temperature setting of

6500K.

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (9 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

Automatic Power Saving

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can

automatically reduce its power consumption when not in use. And if an input from a keyboard,

mouse or other input device is detected, the monitor will automatically "wake up". The following table

shows the power consumption and signaling of this automatic power saving features:

Power Management Definition

VESA's

Mode

Video H-sync V-sync Power Used

Power Saving

(%)

LED color

Active

ON

Yes Yes Typical 68 W 0 % Green

Sleep

OFF

No No < 1W 99%

Flashing

Green

Switch Off OFF

--

-- < 1W 99%

Off

This monitor is

ENERGY STAR

®

compliant. As an ENERGY STAR

®

Partner, PHILIPS has

determined that this product meets the

ENERGY STAR

®

guidelines for energy efficiency.

RETURN TO TOP OF THE PAGE

Physical Specifications

• Dimensions

15.6" x 15.9" x 16.7" / 397 x 405 x 424 mm (including base)

15.6" x 13.1" x 16.7" / 397 x 333 x 424 mm (excluding base)

• Weight 15.3 kg

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (10 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

• Power supply

100-240 VAC, 60-50Hz

(Please refer to rating label)

• Temperature (operating) 0° to 40°C / 32° to 104°F

• Temperature (storage) -25° to +65°C / -13° to +149°F

• Relative humidity(storage) 5% to 95%

* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern.

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Pin Assignment

The 15-pin D-sub connector (male) of the signal cable (IBM systems):

No.

Assignment

No.

Assignment

1 Red video input 9 +5V DDC supply

2 Green video input 10 Logic ground

3 Blue video input 11

Identical output - connected

to pin 10

4

Identical output - connected

to pin 10

12 Serial data line (SDA)

5 Ground 13 H. Sync / H+V

6 Red video ground 14 V. Sync (VCLK for DDC)

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (11 of 12)2005-04-08 ¤W¤È 11:19:48

107C Product Information

7 Green video ground 15 Data clock line (SCL)

8 Blue video ground

RETURN TO TOP OF THE PAGE

Views

Follow the links to see various views of the monitor and its components.

Front View

Rear View

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (12 of 12)2005-04-08 ¤W¤È 11:19:48

Installing your Monitor

Front View • Rear View • 6G3B11 Multimedia Base (option)

Front View

Power button switches your monitor on.

OK button which when pressed will take you to the OSD controls

Contrast hotkey. When the "-" button is pressed, the adjustment

controls for the CONTRAST will show up.

Brightness hotkey. When the "+" button is pressed, the adjustment

controls for BRIGHTNESS will show up.

file:///D|/EDFU/crt_17_6/edoc/english/install_6/INSTALL.htm (1 of 3)2005-04-08 ¤W¤È 11:19:49

Installing your Monitor

"-" and "+" buttons, are used for adjusting the OSD of your monitor.

LightFrame™ hotkey. When the button is pressed, the high-

brightness function of LightFrame™ will show up.

High Bright hot key delivers 4 suitable brightness instantly for text,

internet, game and multimedia.

RETURN TO TOP OF THE PAGE

Rear View

file:///D|/EDFU/crt_17_6/edoc/english/install_6/INSTALL.htm (2 of 3)2005-04-08 ¤W¤È 11:19:49

Installing your Monitor

1. Power in - attach power cable here.

2. Video In - this is a cable which is already attached to your monitor. Connect the other

end of the cable to your PC.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_17_6/edoc/english/install_6/INSTALL.htm (3 of 3)2005-04-08 ¤W¤È 11:19:49

La pagina sta caricando ...

Philips 107C64/42 Manuale utente

Questo manuale è adatto anche per

Philips 107C64/42 Manuale utente

in altre lingue

Documenti correlati

Altri documenti