BMW 32PF7411/10 Manuale utente
- Categoria
- TV LCD
- Tipo
- Manuale utente
Questo manuale è adatto anche per
Country Number Tariff
Austria 0820 901114 €0.20/min
Belgium 070 222 303 €0.17/min
Chech Rep 800142840 free
Denmark 3525 8759 local
Finland 09 2311 3415 local
France 08 9165 0005 €0.23/min
Germany 0180 5 356 767 €0.12/min
Greece 0 0800 3122 1280 free
Hungary 0680018189 free
Ireland 01 601 1777 local
Italy 199 404 041 €0.25/min
Luxemburg 40 6661 5644 local
Netherlands 0900 8407 €0.20/min
Norway 2270 8111 local
Poland 0223491504 local
Portugal 2 1359 1442 local
Slovakia 0800004537 free
Spain 902 888 784 €0.15/min
Sweden 08 5792 9100 local
Switzerland 0844 800 544 local
UK 0906 1010 016 £0.15/min
www.philips.com/support
Model
Serial
1
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate your TV set.
We strongly recommend that you read it thoroughly.
Introduction
Table of Contents
Recycling
The packaging of this product is intended to be recycled. Apply to the local authorities
for correct disposal.
Disposal of your old product
Your product is designed and manufactured with highly quality material and components,
which can be recycled and reused. When this crossed-out wheeled bin symbol is attached
to a product, it means the product is covered by the European Directive 2002/976/EC.
Please inform yourself about the local seperate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products with your
normal household waste. The correct disposal of your product will help prevent potential
negative consequences for the environment and human health.
GB
2
X
X
X
X
X
X
10 cm
10 cm
10 cm
X
Safety Information
Avoid placing your TV set under direct sunlight
or heat.
To prevent fire or shock hazard, do not expose
your TV to rain or moisture.
Take care not to connect too many equipment
to the same mains socket as it may cause
overloading resulting in fire or electric shock.
Pull the power lead by the plug. Do not pull on
the power lead. Do not use a poor fitting mains
socket. Insert the plug fully into the mains. If it is
loose, it may cause arching and result in fire.
No naked flame sources (lighted candles) should
be placed on the top of the set or near it.
When cleaning the surface or the screen of the
set, wipe gently with absorbent cotton or cloth
or other soft material like chamois. Do not use
too wet a cloth which is dripping with water.
Do not use acetone, toulene or alcohol to
clean the TV. As a safety precaution, unplug the
power cord from the mains.
As a safety precaution, do not touch any part of
the TV, power lead or aerial lead during lightning
storms.
Installation of the TV set on the wall should be
carried out by qualified serviceman. Improper
and incorrect installation may render the set
unsafe.
Avoid placing vase filled with water on the TV.
Water spilled into the set could result in electric
shock. Do not operate set if water is spilled into
it. Have it checked immediately by a qualified
serviceman.
Leave at least 10 cm around each side of the
TV set to allow for proper ventilation. Place
the set on a stable, level surface. Never cover
the ventilation slots of the TV with a cloth or
other material. It may cause overheating. Do not
insert anything in the ventilation holes. If metal
or something flammable is inserted in these
holes, it may result in fire or electric shock.
3
2
3
Switching on the TV set
• To switch on the TV set, press the POWER
button. A green indicator comes on and the
screen lights up.
• If the TV set remains in standby mode (red
indicator), press the PROGRAM – /
+ key on
the keyboard or the P – / + key on the
remote control.
1
Preparation / Getting started
Connections
• Insert the aerial plug into the 75Ω :
socket at the bottom of the set.
• Insert the mains plug into a wall socket
(220-240V / 50/60Hz).
• Ensure the power cord is fully inserted in
the TV mains socket and the wall socket.
Warning!
If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections. This may cause arching and
result in fire.
Using the Remote Control
Pull out the plastic insulation sheet from the
battery to enable the remote control to operate.
NOTE
For more details on other connections,
see “CONNECTION GUIDE”.
26
”
32
”
3
7
”/42”/50”
26
”
–
PROGRAM +
MENU
–
VOLUME +
POWER
32”
37”/42”/50”
4
Television keys and connectors
6
7
8
9
10
EXT 4
EXT 2 /SVHS2
EXT 1
DVI
(AUDIO IN)
HDMI 2
HDMI 1
AUDIO
R L
IN
Pr
Pb Y
L
R
5
AC in ~
Headphone
Audio In
Video In
S-Video
AUDIO
IN
R
L
VIDEO
IN
S-VIDEO
11
EXT3/SVHS3
3
–
PROGRAM +
MENU
– VOLUME +
POWER
4
2
1
32”
1
2
3
4
11
LCD
TV
5
5
6
7
8
9
10
EXT 4
EXT 2 /SVHS2
EXT 1
DVI
(AUDIO IN)
HDMI 2
HDMI 1
AUDIO
R L
IN
Pr
Pb Y
L
R
MAINS ~
AC in ~
Plasma TV
CAUTION : This
a Class 1
apparatus.
It must be connected
to a MAINS socket
out with a protective
earthing connection.
EXT3/SVHS3
37”/42”/50”
5
Television keys and connectors
1
POWER
.
: to switch the TV on and off.
2
VOLUME –/+: to adjust sound level.
3
MENU : to access or close menus.
The PROGRAM /CHANNEL –/+ keys can
be used to select a menu item and the
VOLUME –/+ keys to enter into the selected
menu item and make adjustments.
4
PROGRAM / CHANNEL –/+ : to select
programmes.
5
POWER socket :
Insert the mains plug into
a wall socket.
6
DVI Audio Input : for connecting a HD
(high definition) equipment or computer with
DVI output.
7
Component Video inputs / Audio Inputs
(
EXT4)
: to connect to equipment like DVD,
Set-Top box which have the same sockets.
Connect the audio inputs of the TV to the
outputs of the device together with the
Component Video Inputs.
8
HDMI socket : to connect to set-top box,
DVD player/recorder, High Definition
equipment or Personal Computer.
9
EXT1 and EXT2/SVHS2 sockets : connect to
equipment
like DVD player/recorder, VCR,
Decorder which have scart connections.
Important : In order to connect your
decoder, please use EXT1 scart only.
10
TV Aerial socket :
Insert the aerial plug
into the 75 : socket.
11
Side connections
EXT3/SVHS3
: for
connecting to devices like camera or
camcorder. Also allows you to connect your
headphone for your personal listening
pleasure.
Note :
EXT3/SVHS3
is only available for
certain models.
NOTE
For more details on connections,
see CONNECTION GUIDE.
1
3
4
2
6
7
8
9
10
EXT 4
EXT 2 /SVHS2
EXT 1
DVI
(AUDIO IN)
HDMI 2
HDMI 1
AUDIO
R L
IN
Pr
Pb Y
L
R
5
AC in ~
Headphone
Audio In
Video In
S-Video
AUDIO
IN
R
L
VIDEO
IN
S-VIDEO
11
EXT3/SVHS3
26”
6
Remote Control keys
1
Standby
To set the TV to standby mode. To switch the
TV set on again, press
,
to
,
P – / + or AV key.
2
Pixel Plus
Offers a unique combination of ultimate
sharpness, increased depth impression, true
natural detail, brilliant and vivid colours. Press
the key for a Pixel + demonstration.
3
DVD / AUX (see page 7).
4
Surround Sound
To activate / deactivate the surround sound
effect. In stereo, this gives the impression that
the speakers are further apart. For models
equipped with Virtual Dolby Surround, you can
experience Dolby Surround Pro Logic sound
effects
.
5
Telextext keys (see page 15).
6
AV
To display Source List to select TV or peripheral
equipment connected to EXT 1, EXT 2/SVHS2,
EXT 3/SVHS3, EXT 4, HDMI 1 or HDMI 2.
Note :
EXT3/SVHS3
is only available for
certain models.
7
Active Control
(
S
ee page 14).
8
MENU
To call up or exit the TV menus.
9
Cursors
These 4 keys are used for selection and adjustment
of menu items.
10
OK
Confirms selection.
11
Volume ( – VOL + )
To adjust the sound level.
12
Smart Picture /Sound
Used to access a series of predefined picture
and sound settings (see page 14).
13
/
Numerical keys
For direct access to programmes. For a 2
digit programme number, the 2
nd
digit must
be entered before the dash disappears.
14
Screen information
To display/remove the programme number,
the sound mode, the remaining time of the
sleeptimer and the *signal strength indicator.
15
Mode
Select between TV, DVD and AUX mode (see
“Remote Control - Other functions” on page 7).
16
Programme List
To display / clear the list of programmes.
Use the
keys to select a programme and
the
key to display it.
17
Picture-in-Picture
To display a PIP window on the TV screen (see
page 12 on how to use the PIP feature).
18
Sound mode
Used to force programmes in Stereo
and Nicam Stereo to Mono or, for
bilingual programmes, to choose between
Dualå or Dual». The Mono indication is red
when in forced position.
19
Screen Format
(see page 13).
20
DVD / AUX (see page 7).
21
Mute
Press to mute or restore sound.
22
Selecting TV programmes (P – / +)
To select the next or previous programme.
The number and the sound mode
are displayed for a few seconds. For some
TV programmes, the title of the programme appears
at the bottom of the screen.
23
Previous/Present programme
To alternate between the last viewed and
present programme.
* The signal strength indicator shows
the signal strength of the transmission
of the programme you are watching.
11
AUX
1
2
3
5
6
7
8
9
4
10
12
13
14
15
16
17
18
19
20
21
22
23
7
Quick Installation
When you switch on the TV set for the
first time, a menu is displayed on screen.
This menu prompts you to select the
country and language for the menus.
Note
If the above menu is not displayed, proceed to do the
installation of channels by the Auto Store method
(see page 8). If above menu is displayed, proceed to
do the following steps.
& Use the keys on the remote control
to select your country. If your country does
not appear in the list, select “. . . “ . Refer to
the “Reference table of countries for selection”
on page 20.
é Use the key to move to the Language
mode and select your language by the
keys.
“ Use the key to start search.
Plug’n’Play
Country
GB
Language
English
The search starts automatically. All the available
TV programmes will be stored. This operation
takes a few minutes. The display shows the
progress of the search and the number of
programmes found.
Important : To exit or interrupt the search
before it is completed, press the key.
If you interrupt search during auto store, not
all channels will be stored. For all channels to
be stored, you need to do a complete auto
store search again.
Note
ATS (Automatic Tuning System) feature
If the transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. In this case, the installation
is complete. If this is not the case, you need to
use the Sort menu to number the programmes
correctly.
ACI (Automatic Channel Installation)
feature
If a cable system or a TV channel which
broadcasts ACI is detected, a programme
list appears. Without ACI broadcast, the channels
are numbered according to your language and
country selection. You can
use the Sort menu to renumber them.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc.). In this
case, indicate your choice using the keys and
confirm with key.
The remote control also allows you to control the main functions of some Philips DVD models
Press the
key to select the required mode: DVD or AUX.
The remote control indicator lights up to display the selected mode. It switches off automatically
after 20 seconds if left idle. The mode automatically returns to TV mode.
The following buttons are operational, depending on the equipment:
to
standby
fast rewind
stop
play
fast forward
record
pause
display and exit menu
programme selection
navigation and adjustments,
confirms selection
digit keys
Note : Functions not available to Philips DVD-R device.
Remote Control keys (Other functions)
8
Programme Sort
Press the
key. The TV Menu is
displayed on the screen.
Use the key, select the Install menu
and the /
key to enter the
Install menu.
Use the key to select Sort and the
/
key to enter sort mode.
Select the programme number you want to
move using the keys and the /
key to enter sorting mode (The arrow cursor
now points to the left).
Use the keys to select the new
programme number and confirm with the
/
key. (The arrow points to the
right and sorting is completed).
Repeat steps and for each
programme number you wish to re-number.
To return to previous menu, press the
key.
To exit the menu, press the
key.
1
4
5
4
3
5
6
2
7
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Auto Store
Manual Store
Sort
Name
Auto Store
Press the
key.
Using the
key, select Install and the
/
key to enter the Install menu
(Language is highlighted).
Select your desired menu *Language with
the Í Æ keys.
Select Country with the
key and
use the
keys to select the country of
your choice.
Using the
key, select Auto Store and
the
/
key to start automatic
searching of the channels. All the available TV
programmes will be stored. This operation
takes a few minutes. The display shows the
progress of the search and the number of
programmes found.
After the search is completed, press the
key to exit menu.
Important : To exit or interrupt the search
before it is completed, press the
key.
If you interrupt search during auto store, not
all channels will be stored. For all channels to
be stored, you need to do a complete auto
store search again.
1
2
3
5
4
6
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Auto Store
Manual Store
Sort
Name
Search
* Selecting the language
If you have selected the wrong language for one
reason or another and do not understand the
language to operate the set, do the following to
bring you back to your preferred language :
– press the
key to exit the existing
menu.
– press the
key to enter the TV menu.
– press the
key repeatedly until the
FOURTH item in the TV menu is
highlighted.
– press the
/ key to go into the Install
menu.
– press the
keys to select your preferred
language (the menu will now appear in the
chosen language). You can proceed to install
the TV channels.
8
9
Manual Store
Search :
Press the /
key. The search starts.
Once a programme is found, the scanning
stops and its name is displayed (if available).
Go to the next step. If you know the
frequency of the required programme, this
can be entered directly using the
to
keys.
Program No. :
Enter the required number with the
to
or keys.
Fine Tune :
If the reception is not satisfactory, adjust
using the keys.
Store :
To store the changes, press /
key .
The programme is now stored.
Repeat steps
6
to
9
for each programme
to be stored.
To return to previous menu, press the
key.
To exit the menu, press the
key.
System : Use the
keys to select
Europe (automatic detection*),
France (LL’ standard),
UK (I standard),
West Europe (BG standard) or
East Europe (DK standard).
* Except for France (LL’ standard), you must
select France.
1
3
4
2
5
6
7
8
9
10
11
This menu is used to store the programmes
one at a time.
Press the
key.
With the
key, select Install and the
/
key to enter the Install menu.
Use the
key to select Manual Store and
the
/
key to enter Manual Store
menu.
Use the
keys to select the items in the
Manual Store menu to adjust or activate.
TV Menu
Picture
Sound
Features
Install
Manual Store
System
Search
Program No.
Fine Tune
Store
Europe
Naming of Channel
You can give a name to the TV channel.
Press the
key.
With the
key, select Install and the
/
key to enter the Install menu.
1
3
4
2
Use the
key to select Name and
the
/
key to enter name mode.
Use the
keys to select the programme
you want to name and the
/
key to
enter naming mode.
Use the
keys to select the characters
and use the
keys to move around the
name display area (maximum of 5
characters).
Press
/
key until the name
appears at the top left hand corner of the
TV screen. The name is now stored.
7
To exit the menu, press the
key.
5
6
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Auto Store
Manual Store
Sort
Name
8
12
10
Picture and Sound Settings
Press the
key.
Use the Î ï keys to select Picture or
Sound.
Use the Í Æ /
keys to enter
Picture or Sound menu.
Use the keys to select a Picture or
Sound setting and the keys to adjust.
Use the keys to select Store.
To store the changes, press key.
To return to previous menu, press the
key.
To exit the menu, press the
key.
1
2
3
4
5
TV Menu
Picture
Sound
Features
Install
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp.
Store
39
TV Menu
Picture
Sound
Features
Install
Sound
• 120 Hz
• 500 Hz
• 1500 Hz
• 5 KHz
• 10 KHz
Description of the Picture settings
Brightness : this changes picture brilliance.
Colour : this changes the intensity of the colour.
Contrast : this changes the difference between
the light and dark tones.
Sharpness : this increases or decreases the
sharpness level to improve details in the picture.
Colour Temp. : this changes the colour
rendering: Cool (bluer), Normal (balanced) or
Warm (redder).
Store : to store the picture adjustments and
settings.
Description of the Sound settings
Equalizer : to adjust the sound tone (from bass:
120 Hz to treble : 10 KHz).
Balance : this balances the sound level on the left
and right speakers.
Delta Volume : this is used to compensate
any volume differences between the different
programmes or EXT sockets. Note : Programmes
0 to 40 have individual volume setting and
programmes 41 and above share common setting.
AVL (Automatic Volume Leveller) : this is used
to limit sudden increases in sound, especially on
programme change or advertising slots.
Dolby Virtual : To activate / deactivate the
surround sound effect.
You can also access these settings with the
key.
Store : this is used to store the sound settings.
6
7
8
11
Using the Contrast+ and NR (Noise Reduction) features
Press the
key.
With the key, select Features and the
/
key to enter the Features menu.
Use the keys to select Contrast+ or
NR (Noise Reduction) and the keys
to select an On or Off option.
To return to previous menu, press the
key.
To exit the menu, press the
key.
Definition of the feature settings
Contrast+ :
– optimise the total contrast of the picture for
improved picture visibility.
– select On option to activate feature.
NR (Noise Reduction) :
– improves “noisy” picture (little dots on picture)
due to weak signal transmission.
– select On option to activate feature.
1
3
4
2
5
This menu lets you use the TV set as an alarm.
& Press the
key.
é With the
key, select Features and the
/
key to enter the Timer menu.
“ Use the
key to access the settings
and the
or
key to
select or adjust setting.
Sleep: to select an automatic standby period.
Time: enter the current time. Note: the time
is updated automatically each time the TV set
is switched on via the teletext information on
programme 1. If this programme does not have
teletext, the update will not take place.
Start Time: enter the start time.
Stop Time: enter the standby time.
Program No.: enter the number of the
programme for the wake-up alarm.
Activate: the settings include:
• Once for a single alarm,
• Daily for each day,
• Off to cancel.
‘ Press
to put the TV set in standby.
It will automatically come on at the
time programmed.
If you leave the TV set on, it will just
change programmes at the time entered
(and will go to standby mode at the Stop
Time).
Timer function
TV Menu
Picture
Sound
Features
Install
Timer
Sleep
Time
Start Time
Stop Time
Program No.
Activate
10:56
12
Using the PIP (Picture-in-Picture) feature
“ Use the keys to select PIP
‘ Use the /
key to enter PIP menu.
( Use the keys to select PIP menu items.
§ Use the keys to access the PIP
menu items, make the following adjustments
or options.
è To exit the PIP screen, select PIP Size.
followed by the Off option.
Definitions of PIP items
PIP Size : Select your PIP size (Off, Small,
Medium, Large and Side-by-
Side).
Horizontal :
Move the PIP screen horizontally
from left to right and vice-versa.
Vertical :
Move the PIP screen vertically
from top to bottom and vice-versa.
HDMI : If HDMI 1 or HDMI 2 are both
connected, you can only select
one source, HDMI 1 or HDMI 2.
Accessing the PIP screen via the PIP key
& Press the
key on the remote control
to display PIP screen. A small PIP screen
will appear on the TV screen.
é Press the
key a second time to change
the small PIP screen to a medium PIP screen
size.
“ Press the
key a third time to change the
medium PIP screen to large PIP screen size.
‘ Press the
key a fourth time to change
the large PIP screen to a Side-by-Side (a TV
screen on one side and the PIP screen on the
other side).
(
Press the
key a fifth time exit PIP screen.
The PIP (Picture-in-Picture) feature allows you
to call up a PIP screen of the PC (Personal
Computer) or HD (High Defintion) device
while watching a TV programme.
IMPORTANT
To call up a PIP screen of the PC equipment,
the following step must be taken :
HDMI 1 or HDMI 2 input MUST be
connected
to the DVI output of the PC equipment. Use a
HDMI/DVI cable to do the connection.
To call up a PIP screen of the HD equipment,
the following steps must be taken :
HDMI 1 or HDMI 2 input MUST be
connected
to the HDMI output of the HD equipment.
NOTE
• While you are watching TV programmes, you
can only call up a PIP screen from only one
source.
• Go to the PIP menu and select HDMI. See
below on how to access the PIP menu.
• Select HDMI 1 or HDMI 2 depending on
connection.
Accessing the PIP screen via the PIP menu
& Press the key to display main menu.
é With the key, select Features and
the /
key to enter the Features
menu.
TV Menu
Picture
Sound
Features
Install
Features
Timer
Contrast+
NR
PIP
• PIP Size
• Horizontal
• Vertical
• HDMI
PIP
PIP Size
Horizontal
Vertical
HDMI
Off
NOTE
For more details on connections
to the PC and HD equipment,
see
CONNECTION GUIDE.
PIP
PIP Size
Horizontal
Vertical
HDMI
HDMI 1
PIP
PIP Size
Horizontal
Vertical
HDMI
HDMI 2
13
Screen Formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional
screen). 4:3 pictures sometimes have a black band at the left and right of the screen. This function
allows you to optimise the picture display on screen.
Press the
key (or ) to select the different modes. This TV set is also equipped with
automatic turning which will select the correct-screen format, provided the specific signals are
transmitted with the programmes.
4:3
The picture is reproduced in 4:3 format and a black band is displayed
on either side of the picture.
Movie expand 14:9
The picture is enlarged to 14:9 format, a thin black band remains on
both sides of the picture.
Movie expand 16:9
The picture is enlarged to 16:9 format. This mode is recommended
when displaying pictures which have black bands at the top and bottom
(letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the
screen leaving the sub-titles visible.
Superzoom
This mode is used to display 4:3 pictures using the full surface of the
screen by enlarging the sides of the picture.
Widescreen
The picture is displayed in the correct proportions of images
transmitted in 16:9.
Note: If you display a 4:3 picture in this mode, it will be enlarged
horizontally.
14
Using the Smart Picture and Sound features
Using the Active Control feature
Active Control feature automatically adjusts
the picture setting for optimal picture quality
continuously under any signal conditions.
& Press the key repeatedly to toggle
between Active Control Off and Active
Control
On
options.
Active Control On
Active Control Off
é Select the Active Control On option to
activate the Active Control feature.
“ Select the Active Control Off option to
deactivate the Active Control feature.
Smart Picture feature offers you a choice of 5
picture settings namely : Rich, Natural, Soft,
Multimedia and Personal.
Press the
button repeatedly to cycle
through the settings to select your desired mode.
Smart Sound feature offers you a choice of 4
sound settings namely : Theatre, Music, Voice,
and Personal.
Press the
button repeatedly to cycle
through the settings to select your desired mode.
Rich
or
Personal
Multimedia
Natural
Soft
Theatre
or
Music
Voice
Personal
Definition of Picture Settings
Rich : Brilliant and sharp picture settings
suitable for bright environment and
for use in demonstrations to show
off the quality of the TV on good
sources.
Natural : Reference mode for living room
conditions and average signals.
Soft : Intended for bad-quality signals.
Suitable for living room viewing.
Multimedia : Best for graphical applications.
Personal : Pictures settings are set to your
preference.
Definition of Sound Settings
Theatre : Emphasize sensation to action (Bass
and Treble boosted).
Music : Emphasize low tone (Bass boosted).
Voice :
Emphasize high tone (Treble boosted).
Personal : Sound settings are set to your
preference.
NOTE : The Personal setting is the setting that
you set up using the Picture/Sound menu in the
main menu. This is the only setting in the Smart
Picture/Sound settings that can be changed. All
other settings are pre-set at the factory.
15
Teletext
Teletext is an information system broadcast by certain channels which can be consulted like a newspaper.
It also offers access to subtitles for viewers with hearing problems or who are not familiar with the
transmission language (cable networks, satellite channels, etc.).
Teletext call
1
Selecting a page
2
Direct access to
the items
3
Contents
4
5
Sub-page display
Double page
teletext
6
7
Hidden
information
Enlarge a page
8
9
Favourite pages
3
6
2
2
4
5
1
AUX
9
9
7
8
2
AUX
9
9
This is used to switch on or off teletext display. The
summary appears with a list of items that can be accessed.
Each item has a corresponding 3 digit page number. If
channel selected does not broadcast teletext, the
indication 100 will be displayed and the screen will remain
blank. Proceed to exit teletext and select another channel.
Enter the number of the page required using the 0 to 9
keys or P –/+ keys. Example: page 120, enter 120. The
number is displayed at the top left corner of the screen.
When the page is located, the counter stops searching.
Repeat this operation to view another page. If the counter
continues to search, this means that the page is not
transmitted. Select another number.
Coloured areas are displayed at the bottom of the
screen. The 4 colour keys are used to access the items or
corresponding pages. The coloured areas flash when the
item or the page is not yet available.
This returns you to the contents page (usually page 100).
Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume
sub-page display. The indication
appears top left. Use
the
keys to select previous or next sub-page.
No Function. Not applicable.
To display or hide the concealed information (games
solutions).
This allows you to display the top or bottom part of the
page. Pressing it again will return the page to normal size.
Instead of the standard coloured areas displayed at the
bottom of the screen, you can store 4 favourite pages on
the first 40 channels which can then be accessed using the
coloured keys (red, green, yellow, blue). Once set, these
favourite pages will become the default every time teletext
is selected.
1. Press the
key to change to favourite
pages mode..
2. Use the
/
keys to enter the teletext
page that you want to store as a favourite page.
3. Press and hold the colour key of your choice for about 5
seconds. The page is now stored.
4. Repeat steps 2 to 3 with the other coloured keys.
5. To exit favourite page mode, press the
key.
6. To exit teletext mode, press
the key.
NOTE : To clear favourite pages, press and hold
key for about 5 seconds.
16
Using the TV as a PC Monitor
Your TV can be used as a computer monitor.
IMPORTANT
For the TV to function as PC monitor, the
following steps must be taken :
& HDMI 1 or HDMI 2 input MUST be
connected to the DVI output of the PC.
Use a DVI to HDMI adaptor to do the
connection.
é Press the
key to display Source
List and
use the key to select HDMI 1 or
HDMI 2
.
“
Use the
/
key to switch to the selected
source
.
Using the PC menus
&
Press the
key to display the PC menu.
é Use the key to access the settings
and the key to select or adjust setting
(the settings are automatically saved):
Description Picture settings
Brightness / Contrast :
– Adjusts the brightness and contrast.
Colour Temp :
– Changes the colour rendering : Cool (bluer),
Normal (balance) or Warm (redder).
Audio Selection :
– Chooses the sound reproduced on the TV (PC
or TV).
Description of Features
Format :
– Chooses between full screen or native format
of the PC screen.
PIP (Picture-in Picture) :
– Displays a PIP screen to watch TV programmes
at the same time.
* Mode Selection :
– When you connect PC or HD equipment
supporting resolutions of 480p, 576p or
720p, the Mode Selection in the Features
menu will be highlighted. This will allow you to
select between the PC and HD mode. If
it does not support the 480p, 576p or 720p
resolutions, you cannot access this function.
Using the PIP feature
The PIP (Picture-in-Picture) feature allows you to
call up a PIP screen of a TV programme while you
are in PC mode.
IMPORTANT
To call up a PIP screen of the TV programme,
the
following step must be taken :
HDMI 1 or HDMI 2 input MUST be connected
to the DVI output of the PC equipment. Use a
HDMI to DVI adaptor cable to do the connection.
The PIP menu items : PIP Size, Horizontal
and Vertical works in exactly the same way as
when calling a PIP screen in TV mode. Except for
HDMI, there is no selection for other source.
For description of PIP menu items and how it
works, refer to the section on “Using the PIP
(Picture-in Picture) Feature” page 12.
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
NOTE
For more details on connection to the
PC equipment,
see CONNECTION
GUIDE.
Supported PC Resolutions
640 x 480, 60 Hz 800 x 600, 72 Hz
640 x 480, 67 Hz 800 x 600, 75 Hz
640 x 480, 72 Hz 1024 x 768, 60 Hz
640 x 480, 75 Hz 1024 x 768, 70 Hz
800 x 600, 56 Hz 1024 x 768, 75 Hz
800 x 600, 60 Hz
PIP
PIP Size
Horizontal
Vertical
HDMI
HDMI
Í
No Selection
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
BMW 32PF7411/10 Manuale utente
- Categoria
- TV LCD
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: BMW 32PF7411/10 User manual
Altri documenti
-
Philips 32PF5331/10 Manuale utente
-
Philips 32PF5321/10 Manuale utente
-
Philips 50PF7320/10 Manuale utente
-
-
Philips 26PF4310 LCD Manuale utente
-
Philips 2pf5320 Manuale utente
-
Hitachi CMP5000WXE Manuale utente
-
Philips 37PF9986/12 Manuale utente
-
-