Hitachi CMP5000WXE Manuale utente

Marca: Hitachi

Modello: CMP5000WXE

Categoria: TV

Tipo: Manuale utente

Questo manuale è adatto anche per

CMP5000WXE User m

USER MANUAL

MANUEL UTILISATEUR

BEDIENUNGSANLEITUNG

MANUALE D'USO

Color Plasma Display Monitor

Model

CMP5000WXE

READ THE INSTRUCTIONS INSIDE CAREFULLY.

KEEP THIS USER MANUAL FOR FUTURE REFERENCE.

For future reference, record the serial number of your monitor.

SERIAL NO.

The serial number is located on the rear of the monitor.

MANUAL DE USUARIO

English

This unit has been designed for use as a computer display monitor.

The optional video card is required if you wish to view other video

signals on the monitor. For details consult your local retail dealer.

Français

Cet appareil est conçu pour une utilisation comme moniteur d’affichage

d’ordinateur.

La carte vidéo optionnelle est nécessaire si vous souhaitez regarder

d’autres signaux sur ce moniteur. Pour plus de renseignements,

consultez votre revendeur.

Deutsch

Dieses Gerät ist als Monitor für Personalcomputer konzipiert.

Wenn andere Videosignale auf diesem Monitor betrachtet werden sollen,

muss die optionale Videokarte installiert werden. Weitere Einzelheiten

hierzu erfahren Sie von Ihrem Fachhändler.

Italiano

Questo apparecchio è stato costruito per essere usato come monitor che

accompagna un computer.

Per poter visualizzare su questo schermo segnali video di altro tipo è

necessario far uso della scheda video opzionale. Per dettagli in proposito

rivolgersi al rivenditore.

Español

Esta unidad ha sido diseñada para ser empleada como monitor de

computadora.

Para poder ver otras señales de vídeo en el monitor, es necesario instalar

la tarjeta de vídeo opcional. Para más detalles, consulte a su distribuidor

en la tienda de su localidad.

English

USER’S MANUAL

Thank you very much for purchasing the HITACHI Plasma

Display Monitor.

Before using your monitor, please carefully read the

“SAFETY GUIDELINES” and this “USER’S MANUAL” so

you will know how to operate the monitor properly. Keep

this manual in a safe place. You will find it useful in the

future.

Notes on Installation Work:

This product is marketed assuming that it is installed by qualified

personnel with enough skill and competence. Always have an

installation specialist or your dealer install and set up the product.

HITACHI cannot assume liabilities for damage caused by mistake

in installation or mounting, misuse, modification or a natural

disaster.

Note for Dealers:

After installation, be sure to deliver this manual to the customer

and explain to the customer how to handle the product.

English

Features

Introduces newly developed 50" XGA Wide Plasma Panel

The new high-precision XGA 50" wide plasma panel pushes the

envelope of previous high-luminance panels, producing brighter,

clearer images with higher contrast.

¶ Newly developed full screen filter produces clear,

high-contrast images even in a lighted room.

The new full screen filter suppresses surface reflections to a

minimum, producing clear, high-contrast images even in lighted

locations. Unnecessary frequency components of RGB signals

are also cut, greatly enhancing color reproduction.

¶ Supports wide range of computer signal formats

Direct display of computer signals is supported in resolutions

from 640x400 and 640x480 (VGA) to 1024x768 (XGA) and

1280x768; computer signals with resolutions of 1280x1024

(SXGA) and 1600x1200 (UXGA) are supported in compressed

display format. Screen aspect ratios include DOT-BY-DOT, 4:3,

FULL, and PARTIAL*1

* 1. Operation of screen aspect ratios and screen size differ

depending on the input signal.

¶ Free Installation Configuration

Broader installation possibilities with thinner,

lighter, high-endurance design.

While producing a large 50" screen image, the display is only

98mm thick, and weighs in at only 38.9 kg. On the other hand,

the efficient heat-radiating design greatly improves

environmental operating conditions. The thinner, lighter design,

coupled to high-endurance construction greatly broadens the

range of possible installation locations and styles.

¶ High reliability for commercial applications

This display is provided with features giving it high dependability

in commercial applications, including the ability to suppress peak

luminance in accordance with the viewing program, and to

change the cooling fan’s speed in accordance with changes in

operating environment. Such features provide safety and high-

endurance under conditions of commercial use.

¶ Improved usability

User convenience has been improved by the inclusion of

features making the display even more compatible with your

computer. Some of these include the one-touch screen

adjustment AUTO SETUP function for computer connections,

and the POINT ZOOM function to enlarge local portions of the

screen image to display important detailed program data.

¶ Power-Saving Design

This display achieves the lowest power consumption in the

industry for screens in the 50" XGA class (380 W). Further, use of

the power-control function provides a 20% reduction in power

consumption compared to normal operating conditions (MODE 1,

with color-bar signal input).

¶ Optional line (sold separately)

(For details, please consult the dealer where this unit was

purchased.)

1 Table top stand: CMP5000WXE display stand.

2 Wall installation unit: Wall installation bracket designed as a

wall interface for securing the unit.

Speaker system designed specifically for plasma displays

(width: 7.4 cm): With the adoption of a vertical 2-way system

designed with a 2.5 cm domed conical tweeter and

newly developed 4.5 cm wide oval shaped units

arranged vertically. (When speakers are attached,

the operation panel on this unit is not operable.)

4 Video card: Expansion card allows viewing of video signals

and computer digital RGB signals (DVI compliant).

As an ENERGY STAR

Partner, Hitachi, Ltd. has

determined that this product meets the ENERGY STAR

guidelines for energy efficieney.

NOTE:

The information in this manual is subject to change without notice. The manufacturer assumes no

responsibility for any errors that may appear in this manual.

TRADEMARK ACKNOWLEDGEMENT

VGA and XGA are registered trademarks of International Business Machines Corporation.

APPLE and Macintosh are registered trademarks of Apple Computer, Inc.

VESA is a trademark of a nonprofit organization, Video Electronics Standard Association.

All brand or product names are trademarks or registered trademarks of their respective holders.

English

Before Proceeding

Contents

SAFETY GUIDELINES..................................................I - IV

Before Proceeding...................................................... 2

How to Use This Manual .............................................................. 2

Checking Supplied Accessories................................................... 3

Part Names and Functions ........................................ 4

Main Unit ....................................................................................... 4

Remote Control Unit..................................................................... 5

Connection Panel .......................................................................... 6

Installation and Connections .................................... 8

Installation of the Unit .................................................................. 8

Connection to INPUT1 and INPUT2............................................. 9

Audio Connections ..................................................................... 11

Power Cord Connection ............................................................. 12

How to Route Cables .................................................................. 13

Setting Up the System ............................................ 14

Setup after Connection............................................................... 14

Operations ................................................................ 16

Selecting an Input Source .......................................................... 16

Screen Size Selection ................................................................. 18

Partial Image Enlargement (POINT ZOOM) .............................. 19

Automatic Power OFF................................................................. 20

Display Panel Adjustments ..................................... 21

Adjusting the Picture Quality ..................................................... 21

Adjusting the Image Position and Clock

(Automatic Adjustment) ............................................................. 22

Manual Adjustment of Screen Position and Clock................... 23

Other Operations ..................................................... 24

Rewriting the Input Display (INPUT LABEL) ............................. 24

Power Control Function.............................................................. 25

AUTO FUNCTION........................................................................ 25

Audio Output (AUDIO OUT)....................................................... 26

Additional Information ............................................ 27

Cleaning....................................................................................... 27

Troubleshooting .......................................................................... 27

Specifications .............................................................................. 30

Supplement 1 .............................................................................. 31

Supplement 2 .............................................................................. 32

Explanation of Terms .................................................................. 32

Fixtures

Table Stand Unit (CMPAD06) .................................................... 33

Wall Mount Unit (CMPAK06) .................................................... 39

Speaker Systems (CMPAS05) .................................................. 46

Safety Gudelines

English

SAFETY GUIDELINES

This monitor is designed to be safe to use. However,

fire or serious injury may occur unless you use this monitor in the proper way.

Please follow the instructions shown below in order to avoid injury.

* If smoke comes out,

* If there is a strange smell,

* If water enters the case,

* If you drop the monitor or damage the

cabinet,

(1) Turn off the monitor

(2) Disconnect the power plug from

the mains

(3) Request repair

Warning and Caution are indicated in this guide and monitor itself.

Fire or electric shock may cause death or serious injury unless you follow the instruction.

Electric shock or other accidents may cause serious injury or damage of your properties.

WARNING

CAUTION

Fire or electric shock may cause death or serious injury unless you follow the instruction below.

WARNING

• If something smells strange or smoke comes from the monitor:

Turn off the monitor and disconnect the power plug from the mains immediately.

Contact service center after confirming that the smoking has stopped.

If you continue to operate the monitor with such abnormal condition, it may cause fire or you may receive an electric shock.

• Do not drop water or a foreign substance on to the monitor.

If you drop water or a foreign substance on to the monitor, it may cause fire or an electric shock.

If it happens turn off the monitor and disconnect the power plug from the mains and ask service center for instruction.

• Do not put the monitor on an unstable place.

If you put the monitor on an uneven or unstable place, it may fall down and you may be injured.

Put the monitor on a flat surface strong enough to take the weight.

• Do not apply shock to the monitor.

• Do not use monitor if glass is broken or damaged.

If there is no picture appearance, broken glass , smoking or something smells after applying shock to the monitor, turn off the monitor and

disconnect the power plug from the mains immediately. Then, call the service center.

If you continue to operate the monitor with such abnormal conditions, it may cause fire or you may receive an electric shock.

• Do not disassemble or modify the monitor.

There is high voltage portion inside of the monitor. Disassembling or modification of the monitor may cause fire or electric shock.

• Do not use the monitor in wet environment.

If you use the monitor in a wet place such as bath or shower room, it may cause fire or electric shock. Using the monitor beside a window

when snowing or raining or by a seaside are not recommended.

• Do not damage or modify the power cord.

If you put something heavy on the power cord or pull, squeeze, heat the cord, it may be damaged and it may cause fire or electric shock.

If the power cord is damaged, call service center.

Keep the safety guideline

Do not use the monitor if it fails

If you find something unusual ,

English

Safety Gudelines

SAFETY GUIDELINES(continued)

Fire or electric shock may cause death or serious injury unless you follow the instruction.

WARNING

• The enclosed power cord must be used!

Failure to do so may cause electric shock hazard or fire hazard.

In USA/Canada, use a UL LISTED/CSA LABELLED or CERTIFIED power cord set meeting the following specifications :

Rating: min. 125V, 6 A , Length: max. 3.0m , Type: SVT or SJT

Plug type: NEMA 5-15P figure, Parallel blade, Grounding type

In Europe or 200V area, a proper European standard approved power cord is to be used with this monitor.

For a rated current up to 6 A, a type not lighter than H05VV-F 3G 0.75 mm

or H05VVH2-F 3G 0.75 mm

must be used.

• Use only the correct voltage power outlet with safety ground connection!

100 - 120 V for USA, Canada, etc.

200 - 240 V for Europe, etc.

(This monitor will automatically adjust to the input voltage 100 - 120 / 200 - 240V.)

• Be careful of power cord connection!

Before inserting the plug of the power cord into a socket of the correct voltage, check that the connection portion of the power cord is clean

(with no dust). Then, insert the plug of power cord into the socket firmly, otherwise it may cause electric shock or fire hazard.

• Do not touch the power plug when lightning is close to you.

You may receive an electric shock.

• Do not touch the power plug with wet hands.

You may receive an electric shock.

• Do not obstruct a ventilation hole.

If you obstruct a ventilation hole during the operation of the monitor or just after switching off the power, it may cause a fire or electric shock

due to heating up the monitor.

• Do not put the monitor screen side up.

• Do not put the monitor on a shelf or in a cabinet without adequate ventilation of 4 inches top, sides, bottom and rear.

• Do not put the monitor on a carpet or mattress.

• Do not cover the monitor with a cloth.

• FOR THE CUSTOMERS IN THE U.K.

THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K. PLEASE REFER

TO THE NOTES ON THIS PAGE.

IMPORTANT FOR UNITED KINGDOM

WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS

The mains lead on this equipment is supplied with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the

plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is

detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on

the pin face of the plug. Fuse covers are available from your dealer.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short

to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferably a qualified electrician.

If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a

possible shock hazard by inadvertent connection to the mains supply.

WARNING: THIS EQUIPMENT MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code :

Green and Yellow = Earth, Blue = Neutral, Brown = Live.

As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the

earth symbol or coloured GREEN or GREEN and YELLOW.

The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured

BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

Brown to Live

Fuse

Cord Clamp

Green & Yellow

to Earth

Blue to Neutral

III

Safety Gudelines

English

Electric shock or other accidents may cause serious injury or damage to your property.

CAUTION

• Disconnect the power plug from the mains when you move the monitor.

Moveing the monitor without disconnecting the power plug from the mains may damage the cord and cause a fire or electric shock. You are

advised to move the monitor with two persons.

Handle with care when you move the monitor, particularly take care of glass screen.

• When you disconnect the power plug.

You have to grasp the power plug itself, do not pull the power cord.

If you pull the power cord, you may damage it and it may cause a fire or an electric shock.

Do not touch the power plug just after disconnecting it from the mains or you may receive electric shock.

• Disconnect the power plug from the mains when you don't use the monitor for a long time.

This is for your safety.

• Do not put the monitor in atmosphere with soot, steam, high humidity, and dust.

It may cause a fire or electric shock.

• Do not put the monitor in high temperature atmosphere.

Do not put the monitor in the place exposed to the direct rays of the sun for a long period of time. Heat may cause a fire, transformation, or

melting of the monitor.

• Do not put things on the monitor.

Do not put things on the monitor or give some shock to the monitor.

The monitor may fall down or drop from a desk. And it may cause injury.

• Do not coil or wind the power cord.

This may cause excessive heat resulting in a fire.

• Caution for 200 - 240V operation only

This equipment relies on the protective devices in the building installation for short - circuit and over - current protection. Refer to the

following table for the suitable number and location of the protective devices which should be provided in the building installation.

INFORMATIVE EXAMPLES OF PROTECTIVE DEVICES IN SINGLE - PHASE

EQUIPMENT OR SUB - ASSEMBLIES

You may have serious injury or your property may be damaged unless you follow the instruction below.

CAUTION

Verify that the protective devices in the building installation meets the conditions

in the table prior to installing the equipment.

• Remove the power cord for complete isolation!

For complete isolation from the mains, remove the power cord from the monitor or from the wall socket.

Protection

against

Minimum number

of fuses or circuit

- breaker poles

Location

Case A: Equipment to be connected to

POWER SYSTEMS with earthed neutral

reliably identified, except for Case C

below.

Earth faults 1 Phase conductor

Overcurrent 1

Either of the two

conductors

Case B: Equipment to be connected to

any supply, including IT POWER

SYSTEMS and supplies with reversible

plugs, except for Case C below.

Earth faults 2 Both conductors

Overcurrent 1

Either of the two

conductors

Case C: Equipment to be connected to 3

- wire power systems with earthed

neutral reliably identified.

Earth faults 2

Each phase

conductor

Overcurrent 2

Each phase

conductor

English

Safety Gudelines

SAFETY GUIDELINES(continued)

PRECAUTIONS

• Installation environment

Do not obstruct a ventilation hole.

Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor.

Do not put the monitor in the following places.

• Hot places such as near heater, place exposed to the direct rays of the sun.

• A place where the temperature is widely changing.

• Places with soot, dust or high humidity.

• Poor air ventilation place.

• Place near fire.

• A wet place such as bathroom, or shower room.

• Place where you can trip over it.

• Always vibrating or strongly vibrating places.

• Distorted or unstable places.

• How to view the monitor.

If you use the monitor in too dark a room, your eyes may become tired.

Please use it in a reasonably bright room.

Avoid direct rays of the sun to the screen in order to prevent eye fatigue.

Your eyes will get fatigued after viewing the monitor for long period of time.

Relax your eyes by viewing away from the monitor from time to time.

Please watch the monitor in downward direction.

• Note on image retention

The plasma monitor illuminates phosphor to display images. The phosphor has a finite illumination life. After extended periods of

illumination, the brightness of the phosphor would be degraded to such extent that still images would image retention that part of the screen as

grayed-out images.

Tips to prevent such image retention are:

- Do not display images having sharp brightness differences or high-contrast images, such as monochrome characters and graphic patterns, for

long.

- Do not leave stationary images appearing for long, but try to refresh them at appropriate intervals of time.

- Turn down the contrast and brightness controls.

• How to clean the monitor.

Before cleaning the monitor, turn off the monitor and disconnect the power plug from the mains.

When cleaning the monitor, do not spray directly the screen or cabinet with cleaner.

Use a clean, dust free, dry and soft cloth. If it is not enough, then use a cloth with non-alcoholic or non-ammonia detergent.

Do not rub the surface of the screen with ball-point-pen or screw-driver etc.

• Prevention of an obstacle to Radio receivers

This monitor has been designed pursuant to the EN55022 class B Rules. This is to prevent a problem to Radio receivers.

- Keep the monitor away from Radio.

- Adjust Radio antennas in order for the monitor not to receive interference.

- The antenna cable of Radio should be kept away from the monitor.

- Use a coaxial cable for antenna.

You can check if this monitor influences Radio receivers by turning off all other equipment other than the monitor.

If you find a problem receiving Radio when using the monitor, check the instructions mentioned above.

• Precautions for the monitor

- Confirm the connector is fixed tightly when the signal cable is connected.

Also confirm the screws on the connector are tightened.

- Plug the power cord of the monitor into a different socket from that for other equipment, such as Radio etc..

- Use a plug with ground terminal and make sure that it connects to the ground.

• Precaution during transportation

Please pay attention when you transport this monitor because it is heavy.

Furthermore, use the original carton box and its packaging materials when the monitor is transported.

Failure to transport the monitor in any carton except the original carton may result in damage to the monitor.

Save the original carton box and all packing material.

English

Before Proceeding

1 Press MENU to display the menu screen.

MAIN MENU INPUT1

SELECT ENTER EXIT

SET

PICTURE SCREEN SET UP OPTION

CONTRAST

RLEVEL

IGHT.

GLEVEL.

BLEVEL.

H ENHANCE.

V ENHANCE.

RSETE

2 Press 3 to select SCREEN.

SELECT ENTER EXIT

SET

PICTURE SCREEN SET UP OPTION

POSIT ION

CLOC HASEK/ /

RSETE

MAIN MENU INPUT1

3 Press 5/∞ to select the item to be adjusted.

SELECT ENTER EXIT

SET

PICTURE SCREEN SET UP OPTION

POSIT ION

CLOC HASEK/ /

RSETE

MAIN MENU INPUT1

4 Press SET to display the adjustment screen for the

selected item.

ADJUST

SET

EXIT

SET

POH. S I T I ON

POV. SI T ION

5 Press 5/∞/2/3 to adjust the value.

How to Use This Manual

This manual is set up to follow the course of actions and

operations in the order that would seem most logical for

someone setting up this unit.

Once the unit has been taken out of the box, and it has

been confirmed that all the parts have been received, it

may be beneficial to look over the section “Part Names

and Functions” starting on page 4 to become acquainted

with the plasma monitor and remote control unit, as their

respective buttons and controls will be referred to

throughout this manual.

The section “Installation and Connections” starting on

page 8 covers all the necessary points regarding

installation of the plasma display and connections to a

wide variety of components.

The section “Setting Up the System” starting on page 14

covers the necessary on-screen menu settings to

establish correct linkage between the plasma display and

connected components. Depending on the connections

made, this section may or not be necessary.

The remainder of the sections in this manual is dedicated

to the basic operations associated with selecting a source

component up to the more complex operations

associated with adjusting the plasma display picture to

match the requirements of specific components and

personal preferences.

About operations in this manual

Operations in this manual are outlined in step by step

numbered procedures. Most of the procedures are

written in reference to the remote control unit unless the

button or control is only present on the main unit.

However, if a button or control on the main unit has the

same or similar name as that on the remote control unit,

that button can be used when performing operations.

The following example is an actual operation that shows

how one might set the horizontal and vertical positions of

the screen. The screens shown at each step are provided

as a visual guide to confirm that the procedure is

proceeding as it should. Please familiarize yourself with

this process before continuing on with the rest of this

manual.

Note

The screen displays depicted in this manual represent typical

display examples.

The actual items and contents seen in screen displays may vary

depending on input source and specific settings.

English

Before Proceeding

Checking Supplied Accessories

Check that the following accessories were supplied.

1 Remote control unit

2 AA (R6) batteries (x 2)

3 Speed clamps (x 2)

4 Bead bands (x 2)

5 Ferrite core

Before Proceeding

6 Cable tie

÷ USER’S MANUAL

7 Power cord

Part Names and Functions

English

Part Names and Functions

Main Unit

Main unit

1 Remote control sensor

Point the remote control toward the remote sensor to

operate the unit (page 6).

2 STANDBY/ON indicator

This indicator is red during standby mode, and turns

to green when the unit is in the operation mode

(page 16).

Flashes green when Power-Management function is

operating (page 20).

The flashing pattern is also used to indicate error

messages (page 29).

Operation panel on the main unit

3 STANDBY/ON button

Press to put the display in operation or standby mode

(page 16).

4 INPUT button

Press to select input (page 16).

5 MENU button

Press to open and close the on-screen menu (pages

14 to 26).

6 ADJUST (5/∞/3/2) buttons

Use to navigate menu screens and to adjust various

settings on the unit.

Usage of cursor buttons within operations is clearly

indicated in the on-screen display (pages 14 to 26).

7 SET button

Press to adjust or enter various settings on the unit

(pages 14 to 26).

8 SCREEN SIZE button

Press to select the screen size (page 18).

9 AUTO SET UP button

When using computer signal input, automatically sets

the POSITION and CLOCK/PHASE to optimum values

(page 22).

Note

When optional speakers have been connected,

the operation panel on the main unit will not be

operable.

Main unit

Operation panel on the main unit

Part Names and Functions

English

Remote Control Unit

Part Names and Functions

Inserting the batteries in the

remote control unit

CAUTION

¶ Insert batteries so that the plus (+) and minus (–) sides are

aligned according to the markings in the battery case.

¶ Do not mix new batteries with used ones.

¶ The voltage of batteries may differ even if they are the same

shape. Please do not mix different kinds of batteries

together.

¶ When not using the remote control unit for a long period of

time (1 month or more), remove the batteries from the

remote control unit to prevent leaking of battery fluid. If

battery liquid has leaked, thoroughly wipe the inside of the

case until all liquid is removed, and then insert new batteries.

¶ Do not charge, short, disassemble or throw the provided

batteries in a fire.

When disposing of used batteries, please comply with

governmental regulations or environmental public

instruction’s rules that apply in your country or area. H048 En

While pressing down lightly, slide

in the direction of the arrow.

Two AA (R6)

batteries

1 SCREEN SIZE button

Press to select the screen size (page 18).

2 INPUT buttons

Use to select the input (page 16).

3 MENU button

Press to open and close the on-screen menu

(pages 14 to 26).

4 ADJUST (5/∞/3/2) buttons

Use to navigate menu screens and to adjust various settings on the

unit.

Usage of cursor buttons within operations is clearly indicated at the

bottom the on-screen menu display (pages 14 to 26).

5 SET button

Press to adjust or enter various settings on the unit (pages 14 to 26).

6 MUTING button

Press to mute the volume (page 17).

7 AUTO SET UP button

When using computer signal input, automatically sets the POSITION

and CLOCK/ PHASE to optimum values (page 22).

8 STANDBY/ON button

Press to put the unit in operation or standby mode (page 16).

9 DISPLAY button

Press to view the unit’s current input and setup mode (page 17).

0 POINT ZOOM button

Use to select and enlarge one part of the screen (page 19).

- VOLUME (+/–) buttons

Use to adjust the volume (page 17).

When handling the remote control unit

¶ Do not drop or shake the remote control.

¶ Do not use the remote control unit in a location

subject to direct sunlight, heat radiation from a

heater, or in a place subject to excessive

humidity.

¶ When the remote control unit’s batteries begin

to wear out, the operable distance will gradually

become shorter. When this occurs, replace all

batteries with new ones as soon as possible.

Part Names and Functions

English

Part Names and Functions

7 m

Remote Sensor

30°

Connection Panel

The connection panel is provided with two video input

terminals and one video output terminal. Audio input and

speaker output terminals are also provided.

For instructions regarding connections, consult the pages

noted in parentheses by each item.

1 SPEAKER (R) terminal

For connection of an external right speaker.

Connect a speaker whose impedance is 8 -16 Ω

(page 11).

2 CONTROL IN/OUT

DO NOT MAKE ANY CONNECTIONS TO THESE

TERMINALS.

These terminals are used in the factory setup.

3 COMBINATION IN/OUT

DO NOT MAKE ANY CONNECTIONS TO THESE

TERMINALS.

These terminals are used in the factory setup.

4 RS-232C

DO NOT MAKE ANY CONNECTIONS TO THIS

TERMINAL.

This terminal is used in the factory setup.

5 INPUT1 (mini D-sub 15 pin)

For connection of a personal computer (PC) or similar

component. Make sure that the connection made

corresponds to the format of the signal output from

the connected component (pages 9 to 11).

6 OUTPUT (INPUT1) (mini D-sub 15 pin)

Use the OUTPUT (INPUT1) terminal to output the

video signal to an external monitor or other

component.

Note: The video signal will not be output from the

OUTPUT (INPUT1) terminal when the main power of

this unit is off or in standby mode.

(page 10)

7 INPUT2 (BNC jacks)

For connection of a personal computer (PC) or similar

component. Make sure that the connection made

corresponds to the format of the signal output from

the connected component (pages 9 to 11).

If you are having difficulty with operation of

the remote control unit

¶ The remote control unit may not operate if there are

objects placed between it and the display.

¶ Operational distance will gradually become shorter as the

batteries begin to wear out, replace weak batteries with

new ones as soon as possible.

¶ This unit discharges infrared rays from the screen. Placing a

video deck or other component that is operated by an

infrared remote control unit near this unit may hamper that

component’s reception of the remote control’s signal, or

prevent it from receiving the signal entirely. Should this

occur, move the component to a position further away from

this unit.

¶ Depending on the installation surroundings, this unit’s

remote control unit may be influenced by the infrared rays

discharged from the plasma display, hampering reception of

its rays or limiting its operational distance. The strength of

infrared rays discharged from the screen will differ

according to the picture displayed.

¶ This remote control unit has been designed to operate this

display unit only, and it cannot be used to operate other

devices.

Operating range of the remote

control unit

When operating the remote control unit, point it at the

remote sensor located on the front panel of the main

unit. The remote control unit is operable up to 7 m from

the unit and within a 30 angle on each side of the

sensor.

Part Names and Functions

English

Part Names and Functions

~=-

23 4

5 678

IN OUT

CONTROL

COMBINATION

IN OUT

RS-232C

ANALOG RGB (ANALOG RGB)

INPUT1

OUTPUT

GBRHDVD

(ON SYNC) (H/V SYNC)

75 2.2

Ω kΩ

INPUT

(INPUT1/2)

OUTPUT

AC INLET

SPEAKER

8Ω ~16Ω

+ –

SPEAKER

8Ω ~16Ω

+ –

INPUT2 AUDIO

8 Synchronizing signal impedance selector switch

Depending on the connections made at INPUT2, it

may be necessary to set this switch to match the

output impedance of the connected component’s

synchronization signal.

When the output impedance of the component’s

synchronization signal is below 75 Ω, set this switch

to the 75 Ω position (pages 9, 10).

9 AUDIO INPUT (Stereo mini jack)

Use to obtain sound when INPUT1 or INPUT2 is

selected.

Connect the audio output jack of components

connected to INPUT1 or INPUT2 to this unit (page 11).

0 AUDIO OUTPUT (Stereo mini jack)

Use to output the audio of the selected source

component connected to this unit to an AV amplifier

or similar component (page 11).

- MAIN POWER switch

Use to switch the main power of the unit on and off.

= AC INLET

Use to connect a power cord to an AC outlet (page

12).

~ SPEAKER (L) terminal

For connection of an external left speaker. Connect a

speaker that has an impedance of 8 -16 Ω (page 11).

English

Installation and Connections

Installation of the Unit

Installation using the optional HITACHI stand or

installation bracket

÷ Please be sure to request installation or mounting of this unit

or the installation bracket by an installation specialist or the

dealer where purchased.

÷ When installing, be sure to use the bolts provided with the

stand or installation bracket.

÷ For details concerning installation, please refer to the

instruction manual provided with the stand or installation

bracket.

Installation using accessories other than the

HITACHI stand or installation bracket (sold

separately)

÷ When possible, please install using parts and accessories

manufactured by HITACHI. HITACHI will not be held

responsible for accident or damage caused by the use of parts

and accessories manufactured by other companies.

÷ For custom installation, please consult the dealer where the

unit was purchased, or a qualified installer.

Wall-mount installation of the unit

This unit has been designed with bolt holes for

wall-mount installation, etc.. The installation holes that

can be used are shown in the diagram below.

÷ Be sure to attach in 4 or more locations above and

below, left and right of the center line.

÷ Use bolts that are long enough to be inserted 12 mm to

18 mm into the main unit from the attaching surface for

both a holes and b holes. Refer to the side view

diagram below.

÷ As this unit is constructed with glass, be sure to install

it on a flat, unwarped surface.

CAUTION

Because this unit weighs about 40 kg and the lack of depth

makes it fairly unstable, please use 2 people or more when

packing, carrying or installing.

CAUTION

This unit incorporates a thin design. To ensure safety if vibrated

or shaken, please be sure to take measures to prevent the unit

from tipping over.

CAUTION

To avoid malfunction, overheating of this unit, and possible fire

hazard, make sure that the vents on the main unit are not

blocked when installing. Also, as hot air is expelled from the air

vents, be careful of deterioration and dirt build up on rear surface

wall, etc..

CAUTION

Please be sure to use an M8 (Pitch = 1.25 mm) bolt. (Only this

size bolt can be used.)

b hole

Main unit

b hole

Center line

b holeb hole

b hole

Center line

a hole

b hole

Bolt

Attaching surface

Installation

bracket, etc..

12 mm to 18 mm

Rear view diagram

Side view diagram

a hole

Air vents (fan)

Installation and Connections

English

Installation and Connections

Connection to INPUT1 and INPUT2

The INPUT 1 and INPUT 2 terminals are used to connect

the display to a computer. After making the connections,

adjust the screen settings in accordance with the

computer’s signal output. See pages 14-15 for information

regarding settings.

Note

Components compatible with INPUT1 are also compatible with

INPUT2.

INPUT1 is compatible with Microsoft’s Plug & Play (VESA DDC

1/2B).

When making connections to INPUT1, please refer to

supplement 2 on page 32.

For the screen sizes and input signals that

INPUT1 and INPUT2 are compatible with, please

refer to supplement 1 (page 31).

INPUT2

jack

Output

source

[ON SYNC]

GBR

[H/V SYNC]

HD VD

Personal

computer (PC)

with RGB output

SYNC ON G

GBR

H/V SYNC

: Do not connect anything. : Connect to this jack.

Connection to a personal

computer

Connection method differs depending on the computer

type. When connecting, please thoroughly read the

computer’s instruction manual.

Before making connections, be sure to make sure that

the personal computer’s power and this unit’s main

power is off.

For the PC input signals and screen sizes that this unit is

compatible with, please refer to supplement 1 (page 31).

Connection of separate SYNC analog RGB

source

Make separate SYNC connections for a personal

computer that has RGB output separated into 5 output

signals: green, blue, red, horizontal synchronization signal,

and vertical synchronization signal.

When connecting to INPUT2

GBRHDVD

(ON SYNC) (H/V SYNC)

75 2.2

Ω kΩ

INPUT2

When using INPUT2, set the impedance selector switch

to match the output impedance of the connected

computer’s synchronization signal.

When the output impedance of the computer’s

synchronization signal is below 75 Ω, set this switch to

the 75 Ω position.

On-screen setup is necessary after connection.

Please see pages 14 and 15.

English

Installation and Connections

When connecting to INPUT1

ANALOG RGB (ANALOG RGB)

INPUT1

OUTPUT

Connect the cable corresponding to the shape of the

input terminal on this unit and the personal computer’s

output terminal.

Secure by tightening the terminal screws on both units.

After connecting, on-screen setup is necessary.

Please see pages 14 and 15.

Note

Depending on the type of computer model being connected, a

conversion connector or adapter etc. provided with the computer

or sold separately may be necessary.

For details, please read your PC’s instruction manual or consult

the maker or nearest dealer of your computer.

When connecting to OUTPUT (INPUT1)

ANALOG RGB (ANALOG RGB)

INPUT1

OUTPUT

With this unit, it is possible to output the video signal to

an external monitor or other component from the

OUTPUT (INPUT1) terminal.

Note

A video signal will not be output from the OUTPUT (INPUT1)

terminal when the main power of this unit is off or in standby.

To an external monitor

Connection of SYNC ON G analog RGB source

Make SYNC ON G connections for a personal computer

with output that has the synchronization signal layered on

top of the green signal.

When connecting to INPUT1

ANALOG RGB (ANALOG RGB)

INPUT1

OUTPUT

On screen setup is necessary after connection.

Please see pages 14 and 15.

When connecting to INPUT2

GBRHD VD

(ON SYNC) (H/V SYNC)

75 2.2

Ω kΩ

INPUT2

On screen setup is necessary after connection.

Please see pages 14 and 15.

Note

When making SYNC ON G connections, do not make any

connections to the VD or HD terminals. If connections are made,

the picture may be not displayed normally.

Installation and Connections

English

Installation and Connections

Connection of composite SYNC analog RGB

source

Make composite SYNC connections for a personal

computer with output that has the vertical

synchronization signal layered on top of the horizontal

synchronization signal.

When connecting to INPUT1

ANALOG RGB (ANALOG RGB)

INPUT1

OUTPUT

On-screen setup is necessary after connection.

Please see pages 14 and 15.

When connecting to INPUT2

GBRHDVD

(ON SYNC) (H/V SYNC)

75 2.2

Ω kΩ

INPUT2

When using INPUT2, set the impedance selector switch

to match the output impedance of the connected

computer’s synchronization signal.

When the output impedance of the computer’s

synchronization signal is below 75 Ω, set this switch to

the 75 Ω position.

On-screen setup is necessary after connection.

Please see pages 14 and 15.

Notes

÷ When making composite SYNC connections, do not connect

anything to the VD jack. If connected, the picture may not be

displayed properly.

÷ On some types of Macintosh

components, SYNC ON G and

composite SYNC are both output. With this type of

component, please connect using the SYNC ON G connection

(see page 10).

Audio Connections

Before making connections, be sure to check that the

audio component’s power and the unit’s main power is

off.

Connecting the speakers

This unit is equipped with speaker output terminals for

connection to the speaker system (not supplied) specially

designed for use with this unit. Refer to the illustrations

below when making connections to the speaker terminals

on this unit.

10 mm

Note

When making speaker connections, be sure to match the

polarities (+ and –) of the speaker terminals on this unit and the

corresponding terminals on the speakers. If the polarity is

reversed, the sound will be unnatural and lack bass.

Making connections to the audio inputs on this

unit

This unit features two audio inputs and one audio output.

The following chart shows the video inputs and the

corresponding audio input terminals.

Twist exposed

wire strands

together.

Push tab to the open

position, and insert the

wire. Then, close tab

firmly to secure the wire

in place.

INPUT1

INPUT2

Audio input jacks Sound output

Stereo mini jack

(L/R)

Sound of the selected video

input is output from the

• SPEAKER terminals

• Stereo mini jacks (L/R).

Video

input

Audio connections for component (computer)

connected to INPUT 1 or INPUT 2

75 2.2

Ω kΩ

INPUT

(INPUT1/2)

OUTPUT

AUDIO

Audio input to the

AUDIO INPUT terminals

(stereo mini jack) is

possible for a

component connected to either INPUT1 or INPUT2.

Sound is output from both the AUDIO OUTPUT jacks

(stereo mini jack) and the SPEAKER terminals according

to the video input selection.

English

Installation and Connections

Power Cord Connection

Connect a power cord after all component connections

have been completed.

CAUTION

÷ Do not use a power supply voltage other than that indicated

(AC 100 - 240 V, 50/60 Hz) as this may cause fire or electric

shock.

÷ For the plasma display, a three-core power cord with a ground

terminal is used for efficiency protection. Always be sure to

connect the power cord to a three-pronged grounded outlet

and make sure that the cord is properly grounded. If you use a

power source converter plug, use an outlet with a ground

terminal and screw down the ground line.

Attaching the Ferrite Core

To help prevent noise, attach the accessory ferrite core to

the plug end of the power cord as shown in the

accompanying illustration. Use the provided cable tie to

prevent the ferrite core from slipping on the cable.

Ferrite core

Cable tie

AC power cord

To power

outlet

As close as possible

To AC INLET

La pagina sta caricando ...

Hitachi CMP5000WXE Manuale utente

Marca: Hitachi

Modello: CMP5000WXE

Categoria: TV

Tipo: Manuale utente

Questo manuale è adatto anche per

CMP5000WXE User m

Scarica il pdf

rapporto

in altre lingue

English: Hitachi CMP5000WXE User manual

Hitachi CMP5000WXE Manuale utente

Questo manuale è adatto anche per

Hitachi CMP5000WXE Manuale utente

in altre lingue

Documenti correlati

Altri documenti