Eizo GX530 Manuale del proprietario

Marca: Eizo

Modello: GX530

Tipo: Manuale del proprietario

Important

Please read PRECAUTIONS, this User’s Manual, and Setup Manual

(separate volume) carefully to familiarize yourself with safe and

effective usage.

• Please refer to the Setup Manual for basic information ranging from

connection of the monitor to a PC to using the monitor.

• The latest User’s Manual is available for download from our web site:

http://www.eizo.com

Cover

Instructions for Use

■User’s Manual

2

This product has been adjusted specically for use in the region to which it was originally shipped. If operated

outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior

arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been

made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are

subject to change without notice.

Notice for this monitor

This product is intended to be used in displaying and viewing digital images including those of digital mammography

for review and analysis by trained medical practitioners.

Caution: Federal law (USA) restricts this device to sale by or on the order of a physician.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

· Power cords provided with the product

· Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more

after the monitor power has been turned on or the monitor has recovered from the power saving mode.

As it takes about a few minutes for the image quality to reach acceptable level, view images for diagnosis a few

minutes or more after the monitor power has been turned on or the monitor has recovered from the power saving

mode.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a

stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to

“Cleaning” (page 4)).

The screen may have defective pixels or a small number of light dots on the screen. This is due to the characteristics of

the panel itself, and is not a malfunction of the product.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact

your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference

patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure

marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may

occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until

the dew condensation disappears, otherwise it may cause some damage to the monitor.

4Noticeforthismonitor

Cleaning

Attention

• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel,

and also quality deterioration of the image.

• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.

Note

• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface. (“ScreenCleaner” is supplied with

GX530-CLAR.)

If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with

water.

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to

the environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

CONTENTS

Cover ...................................................................... 1

Notice for this monitor ......................................... 3

Cleaning .................................................................... 4

To use the monitor comfortably ............................. 4

CONTENTS ............................................................. 5

Chapter 1 Introduction ....................................... 6

1-1. Features ......................................................... 6

1-2. EIZO LCD Utility Disk.................................... 7

●Diskcontentsandsoftwareoverview............. 7

●TouseRadiCSLE/ScreenManagerPro

forMedical....................................................... 7

1-3. Basic Operations and Functions ................ 8

●BasicAdjustmentmenuoperations................ 8

●Functions......................................................... 9

Chapter 2 Adjusting Screens .......................... 10

2-1. Compatible Resolutions .............................10

2-2. Setting the Resolution ................................10

●Windows8/Windows7.................................10

●WindowsVista................................................10

●WindowsXP...................................................10

●MacOSX.......................................................10

2-3. Selecting the Display Mode (CAL Switch

Mode) .............................................................11

2-4. Adjusting Brightness ..................................11

Chapter 3 Setting Monitor ............................... 12

3-1. Setting the Resolution ................................12

3-2. Setting Input Signal .....................................13

●ToconnectDVI...............................................13

●ToconnectDisplayPort..................................13

3-3. Enabling/Disabling Mode Selection ..........14

3-4. Setting Language .........................................14

3-5. Changing Adjustment Menu Display

Position .........................................................14

3-6. Setting the EIZO Logo Display ...................15

3-7. Locking Buttons ...........................................15

3-8. Enabling/Disabling DDC Communication .15

3-9. Enabling/Disabling DC5V Output...............16

3-10. Return To Default Setting............................16

●Toresetbrightnessadjustmentvalues..........16

●Toresetalladjustmentstothedefault

settings...........................................................16

Chapter 4 Controlling Monitor Quality ........... 17

4-1. Executing Calibration ..................................17

●ExecutingSelfCalibration...............................17

●ViewingSelfCalibrationresult........................17

4-2. Checking Grayscale .....................................18

●ExecutingGrayscaleCheck...........................18

●ViewingGrayscaleCheckresult....................18

4-3. Setting On/Off for Warning and QC

History ...........................................................18

Chapter 5 Power Saving Functions ................ 19

5-1. Setting Power Save ......................................19

5-2. Setting Power Indicator ...............................19

5-3. Setting the power saving mode when a

person leaves the monitor ......................... 20

Chapter 6 Troubleshooting .............................. 21

6-1. No picture .....................................................21

6-2. Imaging problems ....................................... 22

6-3. Other problems ........................................... 23

●ErrorCodetable.............................................24

Chapter 7 Reference ........................................ 25

7-1. How to Attach the Optional Arm ............... 25

7-2. Connecting Multiple PCs ........................... 26

●Toswitchamonginputsignals...................... 26

●Tosetinputsignalselection.......................... 27

7-3. Making Use of USB (Universal Serial

Bus) ............................................................... 28

●Requiredsystemenvironment...................... 28

●Connectionprocedure(SetupofUSB

function)......................................................... 28

7-4. Displaying Monitor Information ................ 29

●Displayingsignalinformation........................ 29

●Displayingmonitorinformation...................... 29

7-5. Specications ............................................. 30

7-6. Glossary ....................................................... 33

Appendix .............................................................. 34

Trademark ............................................................... 34

License .................................................................... 34

Medical Standard ................................................... 35

FCC Declaration of Conformity ............................ 36

EMC Information .....................................................37

LIMITED WARRANTY ............................................. 40

China Measures for RoHS Compliance in

ChinaRoHS .........................................................47

6Chapter1Introduction

Chapter 1 Introduction

Thank you very much for choosing an EIZO monochrome LCD monitor.

1-1. Features

• 21.3 inches

• Applicable to the resolution of 5M pixels (Portrait : 2048 × 2560 dots (H × V))

• Uses high-contrast panel (1200:1).

Enables the display of sharp images.

• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)

• The RadiCS SelfQC function and the built-in Integrated Front Sensor allow the user to perform the

calibration and Grayscale Check for the monitor independently.

See “Chapter 4 Controlling Monitor Quality” (page 17).

• The quality control software “RadiCS LE (for Windows) used to calibrate the monitor and to manage the

history is included.

See “1-2. EIZO LCD Utility Disk” (page 7).

• The software “ScreenManager Pro for Medical” to adjust the screen using the mouse and keyboard is

included.

See “1-2. EIZO LCD Utility Disk” (page 7).

• CAL Switch function for selecting an optimal calibration mode.

See “2-3. Selecting the Display Mode (CAL Switch Mode)” (page 11).

• Selectable DICOM (page 33) Part 14 complied screen.

• Frame Synchronous mode supported (24.5 to 25.5 Hz, 49 to 51 Hz)

• Power saving function

This product is equipped with power saving function.

- Power consumption when main power switch is Off: 0 W

Equipped with main power switch.

Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.

- Presence Sensor

The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the

monitor, it shifts to the power saving mode automatically and does not display the images on the screen. Therefore,

the function reduces the power consumption.

See “5-3. Setting the power saving mode when a person leaves the monitor” (page 20).

• Built-in ambient light sensor

Built-in ambient light sensor measures the environmental illuminance in lux. Depending on the environment, the sensor

sometimes indicates different values from those measured by a stand-alone illuminance meter.

The usage of this sensor requires the quality control software “RadiCS/RadiCS LE” and the measurement is always

triggered by the user’s operation in the corresponding menu.

For further details about the measured value and how to execute the measurement, refer to the RadiCS/RadiCS LE

User’s Manual (on the CD-ROM).

• HDCP (High-bandwidth Digital Content Protection) (for DisplayPort only.)

Attention

• Storing or using the monitor at a temperature of under 30˚C and a humidity of under 70% is recommended, or it may

affect the measurement accuracy of the built-in sensor. Avoid storing or using the sensor where it may be exposed to

direct sunlight.

Chapter1Introduction

1-2. EIZO LCD Utility Disk

An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents

and the overview of the software programs.

●Disk contents and software overview

The disk includes software programs for adjustment, and User’s Manual. Refer to Readme.txt le on the disk

for software startup procedures or le access procedures.

Item Overview

Readme.txtle

RadiCSLE(forWindows) Qualitycontrolsoftwareforcalibratingthemonitorandmanagingthe

calibrationhistory.

ScreenManagerProforMedical(for

Windows)

Softwareforadjustingthescreenusingthemouseandkeyboard.

User’sManualofthismonitor(PDFle)

●To use RadiCS LE/ScreenManager Pro for Medical

For the installation and use of “RadiCS LE/ScreenManager Pro for Medical”, refer to the respective User’s

Manual on the disk.

When using this software, you will need to connect a PC to the monitor with the supplied USB cable. For more

information refer to the “7-3. Making Use of USB (Universal Serial Bus)” (page 28).

8Chapter1Introduction

1-3. Basic Operations and Functions

●Basic Adjustment menu operations

1. Displaying Adjustment Menu

1. Press . The Adjustment menu appears.

Currentmode

Menutitle

Settings

Item

Adjusting/Setting

1. Choose a menu to adjust/set with , , and then press .

2. Choose an item to adjust/set with , , and then press .

3. Adjust/set the selected item with , , and then press .

Exiting

1. Press a few times. The Adjustment menu nishes.

Chapter1Introduction

●Functions

The following table shows all the Adjustment menu’s adjustment and setting menus.

Main menu Item Reference

Mode Brightness “2-4.AdjustingBrightness”(page11)

ModeReset “3-10.ReturnToDefaultSetting”(page16)

RadiCSSelfQC SelfCalibration “4-1.ExecutingCalibration”(page17)

GrayscaleCheck “4-2.CheckingGrayscale”(page18)

Settings “4-3.SettingOn/OffforWarningandQCHistory”

(page18)

Power

Manager

PowerSave “5-1.SettingPowerSave”(page19)

PresenceSensor “5-3.Settingthepowersavingmodewhena

personleavesthemonitor”(page20)

PowerIndicator “5-2.SettingPowerIndicator”(page19)

MenuSettings Language “3-4.SettingLanguage”(page14)

MenuPosition “3-5.ChangingAdjustmentMenuDisplay

Position”(page14)

Tools Input “Toswitchamonginputsignals”(page26)

InputSelection “Tosetinputsignalselection”(page27)

ModePreset “3-3.Enabling/DisablingModeSelection”(page

14)

SignalInfo “7-4.Displayingmonitorinformation”(page29)

MonitorInfo

AllReset “3-10.ReturnToDefaultSetting”(page16)

10 Chapter2AdjustingScreens

Chapter 2 Adjusting Screens

2-1. Compatible Resolutions

For details on compatible resolutions, refer to “Compatible Resolutions” in the Setup Manual.

2-2. Setting the Resolution

When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change the

resolution, follow the procedure below.

●Windows 8 / Windows 7

1. For Windows 8, click the “Desktop” tile on the Start Screen to display the desktop.

2. Right-click the mouse anywhere on the desktop except for icons.

3. From the displayed menu, click “Screen resolution”.

4. On the “Screen Resolution” dialog box, select the monitor.

5. Click “Resolution” to select the desired resolution.

6. Click the “OK” button.

7. When a conrmation dialog box is displayed, click “Keep changes”.

●Windows Vista

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Personalize”.

3. On the “Personalization” window, click “Display Settings”.

4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the

“Resolution” eld.

5. Click the “OK” button.

6. When a conrmation dialog box is displayed, click “Yes”.

●Windows XP

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Properties”.

3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select desired resolution

for “Screen resolution” under “Display”.

4. Click the “OK” button to close the dialog box.

●Mac OS X

1. Select “System Preferences” from the Apple menu.

2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.

3. On the displayed dialog box, select the “Display” tab and select desired resolution in the “Resolutions” eld.

4. Your selection will be reected immediately. When you are satised with the selected resolution, close the

window.

Chapter2AdjustingScreens

2-3. Selecting the Display Mode (CAL Switch Mode)

This function allows easy selection of a desired mode according to monitor application.

Display Modes

Mode Purpose

1-DICOM AvailabletodisplayinDICOMmode.

2-Custom Availableforthesettingaccordingtoyourpreference.

3-CAL Displaysthescreenadjustedbycalibrationsoftware.

Themodemenu

appears.

Procedure

1. Press .

The mode menu appears at the bottom left of the screen.

2. The mode among the list is highlighted in turn each time is pressed.

You can switch the mode with or while the mode menu is displayed.

→1-DICOM←→2-Custom←→3-CAL←

Note

• The Adjustment menu and the Mode menu cannot be displayed at the same time.

2-4. Adjusting Brightness

The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back

panel).

Adjustable range

0 to 100%

Procedure

1. Choose “Mode” from the Adjustment menu, and press .

2. Choose “Brightness” from the “Mode” menu, and press .

3. Use or for adjustment.

4. Press to exit.

12 Chapter3SettingMonitor

Chapter 3 Setting Monitor

3-1. Setting the Resolution

This function changes the display orientation of the image based on the operating environment.

Attention

• Refer to the User’s Manual of the graphics board.

• Setting is available even when the PC is not started up.

Procedure

1. Press to turn off the monitor.

2. Holding down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “Orientation” from “Optional Settings”, and press .

4. Choose “Landscape”, “Portrait (SW)”, or “Portrait (HW)” with or , and press .

Monitor Orientation Display Example

Landscape

SelectthisoptionwhenusingtheLandscapeorientation.

Portrait(SW)

SelectthisoptionwhenusingthePortraitorientation.Graphicsboardutility

softwareisusedtorotatethedisplayimage90degrees.

Portrait(HW)

SelectthisoptionwhenusingthePortraitorientation.Themonitorfunction

isusedtorotatethedisplayimage90degrees.

5. Select “Finish” with or .

6. Press .

The “Optional Settings” menu is closed.

Chapter3SettingMonitor

3-2. Setting Input Signal

Signals can be selected based on your operating environment.

Attention

• A supported graphics board is required to display.

• Refer to the User’s Manual of the graphics board.

●To connect DVI

Procedure

1. Press to turn off the monitor.

2. Holding down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “Signal Selection” from “Optional Settings”, and press .

4. Select “DVI” with or , and press .

5. Select “Signal Format” with or , and press .

6. Select ”Standard” or “SDG 8” with or , and press .

7. Select “Sub Pixel Drive” with or , and press .

8. Leave the default setting “Off” as it is, and press .

9. Press twice.

10. Select “Finish” with or .

11. Press .

The “Optional Settings” menu is closed.

Attention

• If “Sub Pixel Drive” is set to “On”, the screen is not displayed properly.

●To connect DisplayPort

Procedure

1. Press to turn off the monitor.

2. Holding down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “Signal Selection” from “Optional Settings”, and press .

4. Select “DisplayPort” with or , and press .

5. Select “Sub Pixel Drive” with or , and press .

6. Leave the default setting “Off” as it is, and press .

7. Press twice.

8. Select “Finish” with or .

9. Press .

The “Optional Settings” menu is closed.

Attention

• If “Sub Pixel Drive” is set to “On”, the screen is not displayed properly.

14 Chapter3SettingMonitor

3-3. Enabling/Disabling Mode Selection

Allows you to select the specied modes only.

Use this function when all the display modes are not available or when keeping the display mode unchanged.

Procedure

1. Choose “Tools” from the Adjustment menu, and press .

2. Choose “Mode Preset” from “Tools”, and press .

3. Use or to select the mode to change, and press .

4. Select “On” or “Off” with or .

5. Press to exit.

Attention

• You cannot set all the modes disable. Set at least one mode to “On”.

3-4. Setting Language

This function allows you to select a language for the Adjustment menu and messages.

Selectable languages

English/German/French/Spanish/Italian/Swedish/Japanese/Simplied Chinese/Traditional Chinese

Procedure

1. Choose “Menu Settings” from the Adjustment menu, and press .

2. Choose “Language” from “Menu Settings”, and press .

3. Select a language with or .

4. Press to exit.

3-5. Changing Adjustment Menu Display Position

You can change the display position of the Adjustment menu.

Procedure

1. Choose “Menu Settings” from the Adjustment menu, and press .

2. Choose “Menu Position” from “Menu Settings”, and press .

3. Choose the position with or .

4. Press to exit.

Chapter3SettingMonitor

3-6. Setting the EIZO Logo Display

This function allows you to display, or not, the EIZO logo.

Procedure

1. Press to turn off the monitor.

2. Holding down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “Logo” from “Optional Settings”, and press .

4. Select “On” or “Off” with or , and press .

5. Select “Finish” with or .

6. Press .

The “Optional Settings” menu is closed.

3-7. Locking Buttons

This function allows you to lock the adjusted/set status to prevent changing them.

Procedure

1. Press to turn off the monitor.

2. Holding down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “Key Lock” from “Optional Settings”, and press .

4. Choose “Off”, “Menu”, or “All” with or , and press .

Settings Buttons that can be locked

Off

(Defaultsetting)

None(Allbuttonsareenabled)

Menu button

All Allbuttonsexcluding

5. Select “Finish” with or .

6. Press .

The “Optional Settings” menu is closed.

3-8. Enabling/Disabling DDC Communication

This function allows you to enable/disable the DDC communication. Normally, turn it on during use. (This is

different from the DDC/CI communication.)

Procedure

1. Press to turn off the monitor.

2. Holding down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “DDC” from “Optional Settings”, and press .

4. Select “On” or “Off” with or , and press .

5. Select “Finish” with or .

6. Press .

The “Optional Settings” menu is closed.

16 Chapter3SettingMonitor

3-9. Enabling/Disabling DC5V Output

This function allows you to enable/disable the DC5V output. Normally, turn it off during use.

Procedure

1. Press to turn off the monitor.

2. Holding down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “DC5V Output” from “Optional Settings”, and press .

4. Select “On” or “Off” with or , and press .

5. Select “Finish” with or .

6. Press .

The “Optional Settings” menu is closed.

3-10. Return To Default Setting

There are two different Resets: Mode Reset for only resetting the brightness adjustments to the default settings and

All Reset for resetting all settings to the defaults.

Attention

• After resetting, you cannot undo the operation.

Note

• Regarding the default setting, see “Main Default Settings” (page 31).

●To reset brightness adjustment values

This function only resets the brightness adjustment value for the currently selected mode to the default settings.

Procedure

1. Choose “Mode” from the Adjustment menu, and press .

2. Choose “Mode Reset” from “Mode”, and press .

3. Select “Execute” with or .

4. Press .

The brightness adjustments revert to the default settings.

●To reset all adjustments to the default settings

This function resets all adjustments to the default settings (except the “Input” and “Optional Settings” menus).

Procedure

1. Choose “Tools” from the Adjustment menu, and press .

2. Choose “All Reset” from “Tools”, and press .

3. Select “Execute” with or .

4. Press .

All settings excluding the “Input” and “Optional Settings” menus are reset to the default settings.

Chapter4ControllingMonitorQuality

Chapter 4 Controlling Monitor Quality

This product has the built-in Integrated Front Sensor, which allows the user to perform periodic calibration and

Grayscale Check for the monitor independently.

Note

• To perform advanced quality control that conforms to medical standards, use the optional monitor quality control software

kit “RadiCS UX1”.

• Perform correlation using RadiCS/RadiCS LE to adjust the measurement result of the Integrated Front Sensor to the

measurement result of the UX1 sensor for reference. Periodical correlation enables the measurement accuracy of the

Integrated Front Sensor equivalent to that of the UX1 sensor. Refer to the User’s Manual of the RadiCS/RadiCS LE for

details.

• After changing the orientation of the monitor, be sure to perform correlation.

• “RadiCS” allows you to set the adjustment target for the calibration and judgment value for Grayscale Check, and also the

schedule for the calibration and Grayscale Check.

• The supplied “RadiCS LE” software also allows you to set the adjustment target and schedule for the calibration. For details,

refer to RadiCS LE User’s Manual (on the CD-ROM).

4-1. Executing Calibration

This function allows you to execute SelfCalibration and view the latest result. In addition, when the schedule is set

using RadiCS/RadiCS LE, the next calibration schedule appears.

●Executing SelfCalibration

Procedure

1. Choose “RadiCS SelfQC” from the Adjustment menu, and press .

2. Choose “SelfCalibration” from the “RadiCS SelfQC” menu, and press .

3. Select “Execute” with or .

4. Press to exit.

SelfCalibration is executed.

Attention

• After SelfCalibration is executed, execute Grayscale Check under the actual temperature of the monitor usage

environment.

●Viewing SelfCalibration result

Attention

• The result can be viewed when “QC History” is “On”. (see “4-3. Setting On/Off for Warning and QC History” (page 18)).

Procedure

1. Choose “RadiCS SelfQC” from the Adjustment menu, and press .

2. Choose “SelfCalibration” from the “RadiCS SelfQC” menu, and press .

3. Select “Result” with or .

4. Select “DICOM”, “Custom”, or “CAL” with or .

5. Press to exit.

The SelfCalibration result (Max. Error Rate, Last Time, and Error Code) appears.

18 Chapter4ControllingMonitorQuality

4-2. Checking Grayscale

This function allows you to execute Grayscale Check and view the latest result. In addition, when the schedule is

set using RadiCS, the next grayscale check schedule appears.

●Executing Grayscale Check

Attention

• Execute Grayscale Check under the actual temperature of the monitor usage environment.

Procedure

1. Choose “RadiCS SelfQC” from the Adjustment menu, and press .

2. Choose “Grayscale Check” from the “RadiCS SelfQC” menu, and press .

3. Select “Execute” with or .

4. Press to exit.

Grayscale Check is executed.

●Viewing Grayscale Check result

Attention

• The result can be viewed when “QC History” is “On”.

Procedure

1. Choose “RadiCS SelfQC” from the Adjustment menu, and press .

2. Choose “Grayscale Check” from the “RadiCS SelfQC” menu, and press .

3. Select “Result” with or .

4. Select “DICOM”, “Custom”, or “CAL” with or .

5. Press to exit.

Up to the ve latest Grayscale Check results (Passed/Failed/Canceled/ERR) appear.

4-3. Setting On/Off for Warning and QC History

This function allows you to set On/Off for Warning and QC History when the Grayscale Check result is Failed.

Procedure

1. Choose “RadiCS SelfQC” from the Adjustment menu, and press .

2. Choose “Settings” from the “RadiCS SelfQC” menu, and press .

3. Select “Warning” or “QC History” with or .

4. Select “On” or “Off” with or .

5. Press to exit.

Chapter5PowerSavingFunctions

Chapter 5 Power Saving Functions

5-1. Setting Power Save

This function allows you to set the monitor into the power saving mode according to the PC status. When the

monitor has shifted to the power saving mode, the images on the screen are not displayed.

Attention

• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.

• Devices connected to the USB upstream port and USB downstream port work when the monitor is in power saving mode or

when the power button of the monitor is Off. Therefore, power consumption of the monitor varies with connected devices

even in the power saving mode.

• Five seconds before the monitor enters the power saving mode, it displays a preliminary message.

Procedure

1. Choose “PowerManager” from the Adjustment menu, and press .

2. Choose “Power Save” from “PowerManager”, and press .

3. Select “Off” , “High” or “Low” with or .

Setting Function

High Turnsoffthebacklight.Thepowersavingeffectisthegreatest.

Low Turnsdownthebacklighttothelowestsetting.Thetimeuntiltheoperationstabilizesafter

exitingthePowerSavingmodenexttimecanbereduced.

4. Press to exit.

Power Saving System

At DVI signal input

This monitor complies with the “DVI DMPM” standard.

At DisplayPort signal input

This monitor complies with the “DisplayPort Standard V1.1a”.

The monitor enters the power saving mode after ve seconds in connection with the PC setting.

PC Monitor Power

Indicator

On Operating Green

Powersavingmode Powersavingmode Orange

5-2. Setting Power Indicator

The brightness of the power indicator (green) when the screen is displayed can be adjusted (default setting is set to

light up when power is turned on, and brightness is set to 4).

Procedure

1. Choose “PowerManager” from the Adjustment menu, and press .

2. Choose “Power Indicator” from “PowerManager”, and press .

3. Select the indicator brightness “Off” or in the range from 1 to 7 with or as desired.

4. Press to exit.

20 Chapter5PowerSavingFunctions

5-3. Setting the power saving mode when a person

leaves the monitor

The sensor on the front side of the monitor detects the movement of a person by setting a value from “Level-1” to

“Level-4” of the Presence Sensor function. When a person moves away from the monitor, it shifts to the power

saving mode automatically and does not display the images on the screen to reduce the power consumption. When

a person comes near the monitor again, it comes back from the power saving mode and displays the images. The

detection level of the Presence Sensor can be changed according to the environment of usage.

Note

• At the time of shifting to power saving mode, the message that indicates shifting is displayed.

Attention

• This function cannot be used during landscape style installation or “RadiCS SelfQC” execution.

Procedure

1. Choose “PowerManager” from the Adjustment menu, and press .

2. Choose “Presence Sensor” from the “PowerManager” menu, and press .

3. Select any of “Off”, “Level-1”, “Level-2”, “Level-3”, or “Level-4” (sensor detection level) with or .

Level Detection Area Details

Level-1 90cm(35.4inch)orless Iftheuserleavesthedetectionarea,themonitorshiftstothe

powersavingmode.Stillobjectsinthedetectionareawillbe

interpretedaspresentuser.Thissettingisrecommendedifthe

monitorfrequentlyshiftstothepowersaving,eventhougha

userisinfrontofthescreen.

Level-2 70cm(27.6inch)orless

Level-3 Automaticsetting(90cm

[35.4inch]orless)

Thedetectionareaisdenedautomaticallybytheuser’s

movement.Iftheuserleavesthisarea,themonitorshiftstothe

powersavingmode.Stillobjectsinthedetectionareawillbe

ignored.

Level-4 Automaticsetting(70cm

[27.6inch]orless)

4. Press to exit.

La pagina sta caricando ...

Eizo GX530 Manuale del proprietario

Marca: Eizo

Modello: GX530

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Eizo GX530 Owner's manual
français: Eizo GX530 Le manuel du propriétaire

Eizo GX530 Manuale del proprietario

Eizo GX530 Manuale del proprietario

in altre lingue

Documenti correlati