Samsung PS58A656T1F Manuale utente

imagine the possibilities

Plasma TV

user manual

BN68-01768A-02

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care centre.

Thank you for purchasing this Samsung product.

To receive more complete service, please

register your product at

www.samsung.com/global/register

Model Serial No.

Country Customer Care Centre  Web Site

AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at

BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC

800 - SAMSUNG (800-726786) www.samsung.com/cz

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17,

180 00, Praha 8

DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

ESTONIA 800-7267 www.samsung.ee

FINLAND

30 - 6227 515

www.samsung.com/fi

FRANCE

3260 SAMSUNG(7267864, € 0,15/Min)

0825 08 65 65 (€ 0.15/Min)

www.samsung.com/fr

GERMANY 01805 - SAMSUNG(7267864, € 0.14/Min) www.samsung.de

HUNGARY 06 - 80 - SAMSUNG(7267864) www.samsung.com/hu

ITALIA 800 - SAMSUNG(7267864) www.samsung.com/it

KAZAKHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

KYRGYZSTAN 00-800-500-55-500

LATVIA 8000-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

LUXEMBURG 02 261 03 710 www.samsung.com/lu

NETHERLANDS 0900 - SAMSUNG(7267864, € 0.10/Min) www.samsung.com/nl

NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no

POLAND

0 - 801 - 1SAMSUNG(172678)

022 - 607 - 93 - 33

www.samsung.com/pl

PORTUGAL 808 20 - SAMSUNG(7267864) www.samsung.com/pt

RUSSIA 8-800-555-55-55 www.samsung.ru

SLOVAKIA 0800 - SAMSUNG(7267864) www.samsung.com/sk

SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es

SWEDEN 075 - SAMSUNG(726 78 64) www.samsung.com/se

Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch

TADJIKISTAN 8-10-800-500-55-500

Turkey 444 77 11 www.samsung.com/tr

U.K 0845 SAMSUNG(7267864) www.samsung.com/uk

UKRAINE 8-800-502-0000 www.samsung.ua

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

BN68-01768A.indb 1 2009-01-22 오후 2:56:17

English - 2

User Instructions

 Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the

plasma monitor panel for more than 2 hours as it can cause screen image retention. This image

retention is also known as “screen burn”. To avoid such image retention, reduce the degree of

brightness and contrast of the screen when displaying a still image.

 Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place

over 2000m in height so do not install and operate there.

 Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel

through the vent hole in the upper part of the product. This is normal and does not indicate any defect

or operation failure of the product. However, children should be prevented from touching the upper

part of the product.

 The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding

environment such as temperature or humidity. This is normal and not a defect of the unit.

 Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require

sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.

These pixels will have no impact on the performance of the product.

 Avoid operating the TV at temperatures below 5°C(41°F)

 A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces

of borders displayed on the left, right and centre of the screen caused by the

difference of light emission on the screen. Playing a DVD or a game console

may cause similar effect to the screen. Damages caused by the above effect are

not covered by the Warranty.

 Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may

produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when

displaying still images.

 Warranty

- Warranty does not cover any damage caused by image retention.

- Burn-in is not covered by the warranty.

 Installation

Be sure to contact an authorized service centre, when installing your set in a location with heavy

dust, high or low temperatures, high humidity, chemical substance and where it operates continually

such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)

digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive

DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be

available in some countries.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care centre. (See back cover for more informations.)

BN68-01768A.indb 2 2009-01-22 오후 2:56:18

English - 3

Symbols

 

Press

Important

Note

Contents

General Information

 User Instructions ............................................. 2

 Checking Parts ................................................ 4

 Using the Stand-Base ..................................... 4

 Control Panel ................................................. 5

 Connection Panel ............................................ 6

 Viewing the Remote Control ........................... 8

Operation

 Switching Your Television On and Off ............. 9

 Viewing the Menus .......................................... 9

 Plug & Play Feature ...................................... 10

 Using the TOOLS Button .............................. 12

 Viewing External Signal Sources .................. 12

 Editing Device Names ................................... 13

Channel Control

 Storing Channels Automatically .................... 13

 Storing Channels Manually ........................... 14

 Adding / Locking Channels ........................... 15

 Sorting the Stored Channels ......................... 16

 Assigning Names to Channels ...................... 16

 Fine Tuning Channel Reception .................... 17

 LNA (Low Noise Amplier) ............................ 17

Picture Control

 Changing the Picture Standard ..................... 18

 Customizing the Picture Settings .................. 18



Conguring Detailed Settings on the Picture

.... 19

 Picture Options .............................................20

 Resetting the Picture Settings to the Factory

Defaults ......................................................... 22

Sound Control

 Sound Features ............................................23

 Selecting the Sound Mode

(depending on the model) ............................. 24

 Connecting Headphones (Sold separately) .. 24

Function Description

 Time Features ............................................... 25

 Language / Melody /Entertainment /

Energy Saving / PIP ...................................... 26

PC Display

 Setting up Your PC Software

(Based on Windows XP) ............................... 28

 Input Mode (PC) ............................................ 29

 Setting the PC ............................................... 30

Using the DTV Feature

 Previewing the DTV Menu System ............... 31

 Displaying Programme Information ............... 32

 Operating the DTV Menu .............................. 33

WISELINK

 Using the WISELINK Function ...................... 43

 Using the WISELINK Menu ........................... 44

 Using the PHOTO (JPEG) List ...................... 45

 Using the MP3 List ........................................ 48

 Using the Setup Menu .................................. 49

About Anynet

+

 What is Anynet

+

? .......................................... 51

 Connecting Anynet

+

Devices ........................ 51

 Setting Up Anynet

+ ....................................... 52

 Scanning and Switching between

Anynet

+

Devices ........................................... 52

 Recording ...................................................... 53

 Listening through a Receiver ........................ 54

 Check Points before Requesting Service ..... 54

Appendix

 Teletext Feature (depending on the model) .. 55

 Wall Mount Kit Specications (VESA) ........... 57

 Auto Wall- mount adjustment

(Sold separately) ........................................... 58

 Preparing before installing Wall- Mount on the

wall ................................................................ 59

 How to assemble the Stand-Base

(depending on the model) ............................. 59

 Securing the TV to the Wall .......................... 60

 Troubleshooting ............................................61

 Specications ................................................ 62

English

BN68-01768A.indb 3 2009-01-22 오후 2:56:18

English - 4

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries

Power Cord Cloth-Clean Warranty Card/

Safety Guide Manual

(Not available in all

locations)

Cover-Bottom / Screws (2ea)

(Refer to page 59)

Ferrite Core for

Power Cord

Ferrite Core for

S-Video

Ferrite Core for

Component

Holder-Ring (4ea)

(Refer to page 59)

Sold Separately

Antenna Cable Component Cables Audio Cables PC Cable

Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable



Ferrite Core

The ferrite cores are used to shield the cables from interference.

When connecting a cable, open the ferrite core and clip it

around the cable near the plug.

Using the Stand-Base







Two or more people should carry

the PDP. Never lay the PDP on the

floor because of possible damage

to the screen. Always keep the

PDP upright.







The PDP can rotate 20 degrees in

right and left directions.

-20° ~ 20°

BN68-01768A.indb 4 2009-01-22 오후 2:56:21

English - 5

Control Panel

1

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,

HDMI1, HDMI2, HDMI3, HDMI4, DTV).



In the on-screen menu, use this button as

you would use the ENTER button on the

remote control.

2

MENU

Press to see an on-screen menu of your TV’s

features.

3

– +

Press to increase or decrease the volume. In

the on-screen menu, use the – + buttons

as you would use the ◄ and ► buttons on the

remote control.

4

Press to change channels.

In the on-screen menu, use the

buttons as you would use the ▲ and ▼ buttons

on the remote control.

5

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

6

POWER

Press to turn the TV on and off.

7

Remote Control Sensor

Aim the remote control towards this spot on the

TV.

8

Speakers



The product colour and shape may vary depending on the model.

Front Panel

Front Panel buttons

Touch each button to

operate.

BN68-01768A.indb 5 2009-01-22 오후 2:56:22

English - 6

Connection Panel

Continued...







Whenever you connect an audio or video system to your set, ensure that all elements are

switched off.







When connecting an external device, match the colour of the connection terminal to the cable.

1

POWER IN

Connect the supplied power cord.

2

COMPONENT IN

Audio (AUDIO L/R) and video (Y/P

B/PR) inputs

for Component.

3

PC IN(PC) / (AUDIO)

Connect to the video and audio output jack on

your PC.

4

EXT 1, EXT 2

Inputs or outputs for external devices, such as

VCR, DVD, video game device or video disc

players.

Input/Output Specification

Connector

Input Output

Video Audio(L/R) RGB

Video + Audio(L/R)

EXT 1

  

Only TV or DTV

output is available.

EXT 2

 

Output you can

choose.

5

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

6

Connecting external Audio Devices

Connect RCA audio signals from the TV to an

external source, such as Audio equipment.

7

SERVICE

− Connector for service.

− Connect the serial jack between the

electro-motion wall mount bracket and your

TV when you want to adjust the TV viewing

angle using your remote control.

Rear Panel



The product colour and shape may vary depending on the model.

Cable Television

Network

or

1

432 6 85

9

7

BN68-01768A.indb 6 2009-01-22 오후 2:56:24

English - 7

8

HDMI IN 1, 2, 3

− No additional Audio connection is needed

for an HDMI to HDMI connection.

- When using an HDMI/DVI cable connection,

you must use the HDMI IN 2 jack.



What is HDMI?

- “High Definition Multimedia interface”

allows the ansmission of high definition

digital video data and multiple channels

of digital audio.

- The HDMI/DVI terminal supports DVI

connection to an extended device with

the appropriate cable (not supplied).

The difference between HDMI and DVI

is that the HDMI device is smaller in

size, has the HDCP (High Bandwidth

Digital Copy Protection) coding feature

installed, and supports multi - channel

digital audio.

DVI IN (HDMI 2) AUDIO R/L

DVI audio outputs for external devices.

9

ANT IN

75Ω Coaxial connector for Aerial/Cable

Network.

Supported modes for HDMI/DVI and Component

480i 480p 576i 576p 720p 1080i

1080p

HDMI/DVI 50Hz X X X O O O O

HDMI/DVI 60Hz X O X X O O O

Component O O O O O O O



The product colour and shape may vary depending on the model.

Side Panel

or

1

COMMON INTERFACE Slot

Insert CI (Common Interface) card into the slot.

(refer to page 41)

− When ‘CI Card’ isn’t inserted in some

channels, “Scramble Signal” is displayed on

the screen.

− The pairing information containing a

telephone number, CI CARD ID, Host ID,

and other information will be displayed in

about 2~3 minutes. If an error message

is displayed, please contact your service

provider.

− When the channel information configuration

has finished, the message “Updating

Completed” is displayed, indicating that the

channel list is now updated.



Insert the CI-Card in the direction marked

on it.

2

HDMI IN 4

Connect to the HDMI jack of a device with

HDMI output.

3

WISELINK

Connect a USB mass storage device to view

photo files (JPEG) and play audio files (MP3).

4

S-VIDEO or VIDEO / AUDIO L/R

Video (S-Video or Video) and audio inputs

for external devices, such as a camcorder or

VCR.

5

headphones jack

You can connect a set of headphones if you

wish to watch a television programme without

disturbing the other people in the room.



Prolonged use of headphones at a high

volume may damage your hearing.

5

2

4

1

3

BN68-01768A.indb 7 2009-01-22 오후 2:56:25

English - 8

Viewing the Remote Control

 The performance of the remote control may be affected by bright light.

1

POWER button

(turns the TV on and off)

2

Selects the TV and DTV

mode directly

3

Number buttons for direct

channel access

4

One/Two-digit channel

selection

5

Temporary sound switch-off

6

Available source selection

7

Volume increase

Volume decrease

8

Electronic Program Guide

(EPG) display

9

Use to quickly select

frequently used functions.

0

Control the cursor in the

menu

!

Use to see information on

the current broadcast

@

Use these buttons in the

Channel list and WISELINK,

etc.

$

Press to select the optional

display and sound modes for

sports, cinema and games.

%

VCR/DVD Function (Rewind,

Stop, Play/Pause, Fast/

Forward)

^

ON/OFF

Press to backlight the

buttons on the remote.

This function is convenient

for using at night or when

the room is dark. (Using

the remote control with the

ON/OFF( ) light button set

to On will reduce the battery

usage time.

&

Previous channel

*

Next channel

Previous channel

(

Displays the main on-screen

menu

)

This function enables you to

view and play photo (JPEG)

and audio files (MP3) from

an external device. (See

page 45 (JPEG), 48 (MP3))

a

Returns to the previous

menu

b

Exit the on-screen menu

c

Picture size selection

d

Use this when connecting

a SAMSUNG DMA (Digital

Media Adapter) device

through an HDMI interface

and switching to DMA

mode.

(The DMA button is

optional.) For more

information on the operating

procedures, refer to the user

manual of the DMA. This

button is available when

“Anynet+(HDMI-CEC)" is

“On” (see page 52)

e

Channel control button

(Refer to page 15)

f

Digital subtitle display

Teletext Functions

(Refer to page 55)

2

Exit from the teletext

display (depending on the

model)

6

Teletext mode selection

(LIST/FLOF)

8

Teletext store

9

Teletext size

!

Teletext reveal

@

Fastext topic selection

#

Teletext display/mix both

teletext information and the

normal broadcast

&

Teletext sub page

*

P :Teletext next page

P :Teletext previous

page

(

Teletext index

a

Teletext hold

b

Teletext cancel

Continued...

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

17

16

18

19

20

21

22

23

24

2

5

26

BN68-01768A.indb 8 2009-01-22 오후 2:56:26

English - 9

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as shown in the

figure.

2 Install two AAA size batteries.



Make sure to match the “+” and “–” ends of the batteries with the

diagram inside the compartment.

Using the remote control with the ON/OFF( ) light button set to

On will reduce the battery usage time.

3 Close the cover as shown in the figure.



Remove the batteries and store them in a cool and dry place if you

won’t be using the remote control for a long time. The remote control

can be used up to about 23 feet from the TV. (Assuming typical TV

usage, the batteries last for about one year.)



If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.



The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on

the remote control to switch the television on. The channel that you were watching last is re-selected

automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing

Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.



If the television is initially powered on, several basic customer settings proceed automatically.

Refer to “Plug & Play Feature” on page 10.

3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press

the POWER button on the remote control.

4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER

button or number buttons on the remote control.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen.

Its left side has six icons: Picture, Sound, Channel, Setup,

Input, and Digital Menu.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Move

Enter

Exit

Mode : Standard



Cell Light 7

Contrast 80

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

More

Picture

T V

BN68-01768A.indb 9 2009-01-22 오후 2:56:27

English - 10

Plug & Play Feature

When the television is initially powered on, several basic

customer settings proceed automatically and subsequently.

The following settings are available.



If you accidentally select the wrong country for your TV, the

characters on the screen may be wrongly displayed.



Any functions related to Digital TV (DVB) will only work in

countries or areas where DVB-T (MPEG2) digital terrestrial

signals are broadcasted. Please confirm with your local

dealer if you can receive DVB-T signals. Although this TV set

follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not

guaranteed. Several functions may not be available in some

countries.

1 If the television is in standby mode, press the POWER button

on the remote control. The message Start Plug & Play is

displayed. Press the ENTER button.

2 The Language menu will automatically appear after several

seconds.

3 Select the appropriate language by pressing the ▲ or ▼

button.

Press the ENTER button. The message Select ‘Home Use’

when installing this TV in your home. is displayed.

4 Press the ◄ or ► button to select Store Demo or Home Use,

then press the ENTER button. The message to check the

connected status of the antenna is displayed.



The default selection is Home Use.



We recommend setting the TV to Home Use mode for the

best picture in your home environment.



Store Demo mode is only intended for use in retail

environments.



If the unit is accidentally set to Store Demo mode and you

want to return to Home Use (Standard): Press the Volume

button. When the volume OSD is displayed, press and

hold the MENU button for 5 seconds.

5 Make sure that the antenna is connected to the TV.

Press the ENTER button. The Country menu is displayed.

6 Select your country or area by pressing the ▲ or ▼ button.

Press the ENTER button.

The message Some DTV functions may not be available.

Digital Scan? is displayed.



This function is supported for all countries except for the

following countries: France, Germany, Italy, Netherlands,

Spain, Switzerland, United Kingdom, Austria.

If your country supports the DTV functions, the message is

not displayed. Then you can follow the instructions from step

12

. When the local service provider does not support DTV

broadcasting but you choose a DTV supporting country, it

enters the DTV Plug & Play but DTV functions may not work

properly.When No is selected, follow the instructions from step

7 to 10. When Yes is selected, follow the instructions from

step 11.

Continued...

Plug & Play

Start Plug & Play.

OK

Enter

Plug & Play

Language

Move

Enter

English

Deutsch

Français

Italiano

▼

Plug & Play

Select ‘Home Use’

when installing this TV in your home.

Move

Enter

Store Demo Home Use

Plug & Play

Check antenna input.

Enter

OK

Plug & Play

Country

Move

Enter

▲

United Kingdom

Austria

Eastern Europe

Others

Plug & Play

Some DTV functions may not be available.

Digital Scan?

Move Enter Skip

Yes No

Plug & Play

Auto Store

P 1 C -- 40 MHz

0 %

Enter Skip

Start

BN68-01768A.indb 10 2009-01-22 오후 2:56:28

English - 11

Plug & Play

0%

Services found: 0 Channel:

-

Enter

Skip

Start

Plug & Play

Scanning for digital services...

29%

Services found: 6 Channel: 35

Enter

Skip

Stop

OK

Enjoy your viewing

7 Select No pressing the ◄ or ► button, then press the ENTER

button. Auto Store menu is displayed.

8 Press the ENTER button to start search the channels. The

channel search will start and end automatically. After all the

available channels are stored, Clock Set menu is automatically

displayed. Press the ENTER button.



To stop the search before it has finished, press the

ENTER button with Stop selected.

9 Press the ◄ or ► button to select Month, Day, Year, Hour, or

Minute. Set these by pressing the ▲ or ▼ button.



You can set the Month, Day, Year, Hour, or Minute

directly by pressing the numeric buttons on the remote

control.

10 Press the ENTER button to confirm your setting. The message

Enjoy your viewing is displayed. When you have finished,

press the ENTER button.



Even if the ENTER button is not pressed, the message will

automatically disappear after several seconds.

11 Select Yes pressing the ◄ or ► button, then press the

ENTER button. Auto Store menu is displayed.

12 Press the

ENTER button to start search the analog channels.

The analog channel search will start and end automatically.

After all the available analog channels are stored, the screen

for searching digital channels is automatically displayed.



To stop the search before it has finished, press the

ENTER button with Stop selected.

13 Press the

ENTER button to start search the digital channels.

The digital channel search will start and end automatically.

After all the available digital channels are stored, the screen to

select a time zone is displayed depending on the country.



To stop the search before it has finished, press the

ENTER button with Stop selected.



If the DTV channel is updated, the Source in the source

list of the Input menu is automatically changed to DTV.



For detailed descriptions about DTV channel update, refer

to page 33 of this manual.

14 Press the ▲ or ▼ button to select required time zone, then

press the ENTER button. The screen for setting the time is

displayed. Press the ENTER button.

15 Press the ◄ or ► button to select Month, Day, Year, Hour, or

Min. Set these by pressing the ▲ or ▼ button.



You can set the Month, Day, Year, Hour, or Min directly

by pressing the numeric buttons on the remote control.

16 Press the

ENTER button to confirm your setting. The message

Enjoy your viewing is displayed. When you have finished,

press the ENTER button.



Even if the ENTER button is not pressed, the message will

automatically disappear after several seconds.

If you want to reset this feature …

1

Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Setup, then press the

ENTER button.

3 Press the ENTER button again to select Plug & Play.

The message Start Plug & Play is displayed.

Plug & Play

Set the current time.

Adjust Move Enter Skip





15

Month Day Year

Hour Min

2008

12 00

01

Plug & Play

Move

Select

Skip

The Iberian Peninsula and Balears Islands

Canarian Islands

Plug & Play

Clock Set

Move

Adjust

Enter





15

Month Day Year

Hour Min

2008

12 00

01

Move Enter Return

Plug & Play



Language : English 

Time 

Auto Wall-Mount



Melody : Off



Entertainment

: Off



Energy Saving :

Off



PIP



Setup

T V

BN68-01768A.indb 11 2009-01-22 오후 2:56:29

English - 12

Viewing External Signal Sources

You can switch between viewing signals from connected

equipment, such as a VCR, DVD, Set-Top Box, and the TV

source (broadcast or cable).

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER button.

3 Press the ENTER button again to select Source List.

4 Press the ▲ or ▼ button to select the signal source, then press

the ENTER button.

Available signal sources:

TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3, HDMI 4, DTV



You can choose only those external devices that are connected

to the TV.



You can select these options simply by pressing the SOURCE

button on the remote control.



To watch television programme again, press the TV/DTV button

and select the channel number required.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The

“Tools” menu changes depending on which external input mode you are viewing.

1 Press the TOOLS button.

The Tools menu will appear.

2 Press the ▲ or ▼ button to select a menu, then press the

ENTER button.

3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or

use the selected items.

For a more detailed description of each function, refer to the

corresponding page.

• Anynet+(HDMI-CEC), see page 52

• Picture Mode, see page 18

• Sound Mode, see page 23

• Sleep Timer, see page 25

• SRS TS XT, see page 23

• Energy Saving, see page 27

• Dual I-II, see page 24

• PIP, see page 27

• Auto Adjustment, see page 30

Move

Enter

Return

Source List :

TV 

Edit Name 

Anynet + (HDMI-CEC)

WISELINK

Input

T V

Move

Enter

Return

TV

Ext.1  :−−−−

Ext.2  :−−−−

AV  :−−−−

S-Video  :−−−−

Component :−−−−

PC  :−−−−

More

Source List

T V

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual I-II : Mono

Move Enter Exit

BN68-01768A.indb 12 2009-01-22 오후 2:56:29

English - 13

Editing Device Names

You can give a name to the external source.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Edit Name, then press the

ENTER button.

4 Press the ▲ or ▼ button to select the external source to be

edited, then press the ENTER button.

5 Select the required device by pressing ▲ or ▼, then press the

ENTER button.

Available device names:

VCR, DVD, Cable STB, Satellite

STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,

IPTV, Blu-Ray, HD DVD, DMA.

6 Press the EXIT button to exit.

Storing Channels Automatically



Not available in DTV or external input mode.

You can scan for the frequency ranges available to you

(availability depends on your country).

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers.

However you can sort numbers manually and clear any

channels you do not wish to watch.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ENTER button again. The available countries are

listed.

4 Select your country by pressing the ▲ or ▼ button, then press

the ENTER button.



Even though you have changed the country setting in this

menu, the country setting for DTV is not changed. Use the

Plug & Play function to change the country setting for DTV.

(Refer to pages 10 to 11)

5 Press the ▲ or ▼ button to select Auto Store, then press the

ENTER button.

6 Press the ENTER button again to start the search.

The search will end automatically.



To stop the search before it has finished, press the MENU

or the ENTER button.

Move

Enter

Return

Source List :

TV 

Edit Name 

Anynet + (HDMI-CEC)

WISELINK

Input

T V

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA :

Off



Channel

T V

Auto Store

P 1 C -- 40 MHz

0 %

Enter

Return

Start

Move

Enter

Return

Country :

United Kingdom

Auto Store

Manual Store

Channel Manager

Sort

Name

Fine Tune

LNA :

Off

Channel

▲

Switzerland

United Kingdom

Austria

Eastern Europe

Others

T V

Move

Enter

Return

Ext.1  :−−−−

Ext.2 : −−−−

AV :

S-Video :

Component : −−−−

PC : −−−−

HDMI1 :

More

Edit Name

T V

−−−−

VCR

DVD

Cable STB

Satellite STB

PVR STB

AV Receiver



BN68-01768A.indb 13 2009-01-22 오후 2:56:30

English - 14

Storing Channels Manually



Not available in DTV or external input mode.

You can store television channels, including those received via

cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish

to identify.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Manual Store, then press

the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER button.

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.

Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.



You can also select the channel number directly by pressing the numeric buttons (0~9).

Colour System: Auto/PAL/SECAM/NTSC4.43

− Press the ▲ or ▼ button to select the required colour standard.

Sound System: BG/DK/I/L

− Press the ▲ or ▼ button to select the required sound standard.

Channel (When you know the number of the channel to be stored)

− Press the ▲ or ▼ button to select

C (Air channel) or S (Cable channel).

− Press the ► button, then press the ▲ or ▼ button to select the required number.



You can also select the channel number directly by pressing the numeric buttons (0~9).



If there is abnormal sound or no sound, re-select the sound standard required.

Search (When you do not know the channel numbers)

− Press the ▲ or ▼ button to start the search.

− The tuner scans the frequency range until the first channel or the channel that you selected is

received on the screen.

Store (When you store the channel and associated programme number)

− Set to

OK by pressing the ENTER button.



Channel mode

 P (Programme mode): When completing tuning, the broadcasting stations in your area have

been assigned to position numbers from P00 to P99. You can select a channel by entering the

position number in this mode.

 C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

 S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA :

Off



Channel

T V

Move

Enter

Return

Programme :

P 1

Colour System : Auto 

Sound System : BG 

Channel : C --

Search : 40 MHz

Store : ?

Manual Store

T V

BN68-01768A.indb 14 2009-01-22 오후 2:56:30

English - 15

Adding / Locking Channels



Not available in DTV or external input mode.

Using the Channel Manager, you can conveniently lock or add

channels.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Channel Manager, then

press the ENTER button.

Adding channels

Using the Channel List, you can add channels.

4 Select Channel List by pressing the ENTER button.

5 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,

select a channel to be added, and press the ENTER button to

add the channel.



If you press the ENTER button again, the ( ) symbol

next to the channel disappears and the channel is not

added.

Locking channels

This feature allows you to prevent unauthorized users, such as

children, from watching unsuitable programmes by muting out

video and audio.

6 Press the ▲ or ▼ button to select Child Lock, then press the

ENTER button.

7 Select On by pressing the ▲ or ▼ button, then press the

ENTER button.

8 Press the ▲ or ▼ button to select Channel List, then press

the ENTER button.

9 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,

select a channel to be locked, and press the ENTER button.



If you press the ENTER button again, the ( ) symbol

next to the channel disappears and the channel lock is canceled.



A blue screen is displayed when Child Lock is activated.

10 Press the EXIT button to exit.



You can select these options simply by pressing the CH LIST

button on the remote control.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA :

Off



Channel

T V

Move

Enter

Return

Channel List



Child Lock : Off 

Channel Manager

T V

Channel List

P 1 C 6

1 / 10

▲

▼

Prog.

0

C 1

1 C 6

2 C 5

3 C 8

4 C 11

5 C 22

6 C 26

7 C 36

8 C 52

9 C 24

Add Lock

Move Enter

Page Exit

BN68-01768A.indb 15 2009-01-22 오후 2:56:31

English - 16

Sorting the Stored Channels



Not available in DTV or external input mode.

This operation allows you to change the programme numbers

of the stored channels.

This operation may be necessary after using the auto store.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Sort, then press the

ENTER button.

4 Select the channel that you wish to move by pressing the

▲ or ▼ button, then press the ENTER button.

5 Select the number of the programme to which the channel is to

be moved by pressing the ▲ or ▼ button.

Press the ENTER button. The channel is moved to its new

position and all other channels are shifted accordingly.

6 Repeat steps 4 to 5 until you have moved all the channels to

the required programme numbers.

7 Press the EXIT button to exit.

Assigning Names to Channels



Not available in DTV or external input mode.

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Name, then press the

ENTER button.

4 Press the ▲ or ▼ button to select the channel to be assigned

to a new name, then press the ENTER button.

5 Press the ▲ or ▼ button to select a letter, a number, or a

symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank).

Move on to the previous or next letter by pressing the ◄ or ►

button, then press the ENTER button.

6 Repeat steps 4 to 5 for each channel to be assigned to a new

name.

7 Press the EXIT button to exit.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA :

Off



Channel

T V

Move

Enter

Return

Prog. Ch. Name

0 C--



1 C04

2 C05

3 C08

4 C09



Sort

T V

Move

Enter

Return

Prog. Ch. Name



 0 C-- −−−−−

 1 C04 −−−−−

 2 C05 −−−−−

 3 C08 −−−−−

4 C09 −−−−−



Name

T V

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA :

Off



Channel

T V

BN68-01768A.indb 16 2009-01-22 오후 2:56:32

English - 17

Fine Tuning Channel Reception



Not available in DTV or external input mode.

If the reception is clear, you do not have to fine tune the

channel, as this is done automatically during the search and

store operation.

If the signal is weak or distorted, you may have to fine tune the

channel manually.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Fine Tune, then press the

ENTER button.

4 To obtain a sharp, and clear picture and good sound quality,

press the ◄ or ► button until you reach the optimal setting.

Press the ENTER button.



Press the Info button. Fine Tune Store will change the

colour of the Channel OSD (On Screen Display) from

White to Red and add the “*” mark.



To reset the fine tuning to 0, select Reset by pressing the

▲ or ▼ button. Press the ENTER button.

5 Press the EXIT button to exit.

LNA (Low Noise Amplifier)

This function is very useful in the situation that the TV is used in weak signal.

LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming

signal.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select LNA, then press the ENTER

button.

4 Select Off or On by pressing the ▲ or ▼ button, then press

the ENTER button.

5 Press the EXIT button to exit.



Depending on areas, factory mode of LNA, will be set up as

On or Off.

Fine Tune

P 1

0

Adjust

Save

Return

Reset

P 1 *

Mono

Picture : Dynamic

Sound : Custom

SRS TS XT : Off

−−

:

−−

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA :

Off



Channel

T V

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA :

Off



Channel

T V

BN68-01768A.indb 17 2009-01-22 오후 2:56:32

English - 18

Customizing the Picture Settings

Your television has several setting options that allow you to

control the picture quality.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ENTER button again to select Mode.

4 Select the required mode by pressing the ▲ or ▼ button, then

press the ENTER button.

Available modes:

Dynamic, Standard, Movie

5 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER button.

6 When you are satisfied with your setting, press the ENTER button.

7 Press the EXIT button to exit.

Cell Light - Contrast – Brightness – Sharpness – Colour – Tint



In Analog TV, Ext., AV, S-Video modes of the PAL system, you cannot use the Tint Function.



In PC mode, you can only make changes to Cell Light, Contrast, and Brightness.

Press the ◄ or ► button until you reach the optimal setting.

Changing the Picture Standard

You can select the type of picture which best corresponds to

your viewing requirements.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ENTER button again to select Mode.

4 Select the required mode by pressing the ▲ or ▼ button, then

press the ENTER button.

Available modes:

Dynamic, Standard, Movie



The settings values may vary depending on the input

source.

5 Press the EXIT button to exit.







Choose Dynamic for viewing the TV during the day or

when there is bright light in the room.

 



Choose Standard for general TV watching mode.

 



Choose Movie when viewing the movie.

Easy Setting

1 Press the TOOLS button on the remote control.

2 Press the ▲ or ▼ button to select Picture Mode.

3 Press the ◄ or ► button to select the required option.

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 20

Colour 50

Tint G50 R50

Detailed Settings 

More

Picture

T V

Move

Enter

Return

Mode : Standard

Cell Light 7

Contrast 95

Brightness 45

Sharpness 20

Colour 50

Tint G50 R50

Detailed Settings

More

Picture

Dynamic

Standard

Movie

T V

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 20

Colour 50

Tint G50 R50

Detailed Settings 

More

Picture

T V

Tools

Anynet+ (HDMI-CEC)

PictureMode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual I-II : Mono

Move Adjust

Exit

BN68-01768A.indb 18 2009-01-22 오후 2:56:33

English - 19

Configuring Detailed Settings on the Picture

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ▲ or ▼ button to select Detailed Settings, then

press the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER button.

Available options:

Black Adjust, Dynamic Contrast,

Gamma, Colour Space, White Balance, Flesh Tone, Edge

Enhancement, xvYCC

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.



Detailed Settings is available in Standard or Movie mode.



In PC mode, you can only make changes to Dynamic

Contrast, Gamma and White Balance from among the

Detailed Settings items.

Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma: -3 ~ +3

You can adjust the middle brightness of pictures.

Press the ◄ or ► button until you reach the optimal setting.

Colour Space : Auto/Native/Custom

Colour space is a colour matrix composed of red, green and blue colours.

Select your favorite colour space to experience the most natural colour.

− Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program

sources.

− Native: Native Colour Space offers deep and rich colour tone.

− Custom: Adjusts the colour range to suit your preference. (see “Customizing the Colour Space”)

Customizing the Colour Space

Colour: Red/Green/Blue/Yellow/Cyan/Magenta

Adjusts the Colour range to suit your preference.

Colour is available when Colour Space is set to Custom.

Press the ▲ or ▼ button to select Red, Green, Blue, Yellow, Cyan or Magenta.

Press the ENTER button.

− Red/Green/Blue: In Colour, you can adjust the RGB values for the selected colour.

Press the ▲ or ▼ button to select Red, Green or Blue to change it. Press the ENTER button.

Press the ◄ or ► button to decrease or increase the value of a particular item.

Press the ENTER button.

− Reset: Resets the colour space to the default values.

White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the colour temperature for more natural picture colours.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the

adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Continued...

Move

Enter

Return

Black Adjust :

Off 

Dynamic Contrast : Medium 

Gamma : 0 

Colour Space : Native 

White Balance 

Flesh Tone : 0 

Edge Enhancement

: On 

xvYCC : Off 

Detailed Settings

T V

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 20

Colour 50

Tint G50 R50

Detailed Settings 

More

Picture

T V

BN68-01768A.indb 19 2009-01-22 오후 2:56:33

English - 20

Picture Options

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ▲ or ▼ button to select Picture Options, then

press the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

5 When you are satisfied with your setting, press the

ENTER button.

6 Press the EXIT button to exit.



In PC mode, you can only make changes to the Colour Tone,

Size and Screen Burn Protection from among the items in

Picture Options.

Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2



When the picture mode is set to Dynamic or Standard,

Warm1 and Warm2 cannot be selected.

Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your

viewing requirements.

−

Auto Wide: Expanding and pulling up the picture from 4:3 to

16:9 ratio.

− 16:9

: Sets the picture to 16:9 wide mode.

−

Wide Zoom: Magnify the size of the picture more than 4:3.

Move the screen up/down using the ▲ or ▼ button after

selecting the by pressing the ► or ENTER button.

−

Zoom: Magnify the size of the picture vertically on screen.

− 4:3

: Sets the picture to 4:3 normal mode.

−

Just Scan: Use this function to see the full image

without any cutoff when HDMI(720p/1080i/1080p),

Component(1080i/1080p) signals are input.

After selecting Just Scan in HDMI (1080i/1080p) or

Component (1080i/1080p) mode

: Press the ◄ or ► button

to select , then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the picture

up, down, left and right. Reset: Press the ◄ or ► button to select Reset, then press the ENTER

button. You can initialize the setting.



With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off

or a specific colour appears on the screen.



For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)

connection of 50 and 60Hz, only the input source is supported.



You can change the picture size simply by pressing the P.SIZE button on the remote control.



Depending on the input source, the picture size options may vary.



The items available may differ depending on the selected mode.



When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.



In PC Mode, only "16:9" and "4:3" mode can be adjusted.

Continued...

Flesh Tone:-15~+15

You can emphasize the pink tone in the picture.

Press the ◄ or ► button until you reach the optimal setting.



Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement: Off/On

You can emphasize object boundaries.

xvYCC: Off/On

Setting the xvYCC mode to On increases detail and colour space when watching movies from an

external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the

Picture Mode to Movie to enjoy this feature.



The xvYCC function works only in Component or HDMI mode.

Move

Enter

Return

Auto Wide

16:9

Wide Zoom

Zoom

4:3

Just Scan

Size

T V

Move

Enter

Return

Colour Tone : Normal 

Size : Auto Wide 

Screen Mode : 16:9 

Digital NR : Auto 

DNle : On 

HDMI Black Level : Normal 

Movie Plus : Low 

Blue only mode : Off 

Screen Burn Protection 

Picture Options

T V

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 20

Colour 50

Tint G50 R50

Detailed Settings 

More

Picture

T V

BN68-01768A.indb 20 2009-01-22 오후 2:56:34

La pagina sta caricando ...

Samsung PS58A656T1F Manuale utente

Samsung PS58A656T1F Manuale utente

in altre lingue

Documenti correlati

Altri documenti