Samsung HW-Q800T Manuale del proprietario

USER MANUAL

HW-Q800T

You can access the FULL MANUAL on Samsung’s on-line customer support

centre by scanning the QR code. To see the manual on your PC or mobile

device, download the manual in document format from Samsung’s website.

(http://www.samsung.com/support)

ENG - 2

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Refer to the table below for an explanation of

symbols which may be on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that high voltage

is present inside. It is dangerous to

make any kind of contact with any

internal part of this product.

This symbol indicates that this product

has included important literature

concerning operation and maintenance.

Class II product : This symbol indicates

that it does not require a safety

connection to electrical earth (ground).

If this symbol is not present on a

product with a power cord, the product

MUST have a reliable connection to

protective earth (ground).

AC voltage : This symbol indicates that

the rated voltage marked with the

symbol is AC voltage.

DC voltage : This symbol indicates that

the rated voltage marked with the

symbol is DC voltage.

Caution, Consult instructions for use :

This symbol instructs the user to

consult the user manual for further

safety related information.

WARNING

• To reduce the risk of re or electric shock, do

not expose this appliance to rain or moisture.

CAUTION

• TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a

AC outlet with a protective grounding

connection.

• To disconnect the apparatus from the mains,

the plug must be pulled out from the mains

socket, therefore the mains plug shall be

readily operable.

• Do not expose this apparatus to dripping or

splashing. Do not put objects lled with

liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

ENG - 3

PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power

requirements listed on the identication

sticker located on the bottom of your

product. Install your product horizontally, on

a suitable base (furniture), with enough

space around it for ventilation (7~10 cm).

Make sure the ventilation slots are not

covered. Do not place the unit on ampliers

or other equipment which may become hot.

This unit is designed for continuous use. To

fully turn off the unit, disconnect the AC plug

from the wall outlet. Unplug the unit if you

intend to leave it unused for a long period of

time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due

to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to

overheating and cause the unit to

malfunction.

4. Protect the product from moisture (i.e.

vases), and excess heat (e.g. a replace) or

equipment creating strong magnetic or

electric elds. Unplug the power cable from

the AC wall socket if the unit malfunctions.

Your product is not intended for industrial

use. It is for personal use only. Condensation

may occur if your product has been stored in

cold temperatures. If transporting the unit

during the winter, wait approximately

2 hours until the unit has reached room

temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the

environment. Do not dispose of the battery

in the general household trash. Do not

expose the battery to excess heat, direct

sunlight, or re. Do not short circuit,

disassemble, or overheat the battery.

Danger of explosion if the battery is replaced

incorrectly. Replace only with the same or

equivalent type.

ENG - 4

CONTENTS

01 Checking the Components 5

02 Product Overview 6

03 Using the Remote Control 7

04 Connecting the Soundbar 8

05 Using a wired connection to the TV 11

06 Using a wireless connection to the TV 14

07 Connecting an External Device 17

08 Connecting a Mobile Device 18

09 Installing the Wall Mount 21

10 Installing the Soundbar above a TV Stand 22

11 Software Update 23

12 Troubleshooting 25

13 Licence 27

14 Open Source Licence Notice 27

15 Important Notes About Service 27

16 SpecicationsandGuide 28

ENG - 5

01 CHECKING THE COMPONENTS

VOL WOOFER

SOUNDBAR

SOUND

MODE

PAIR

Soundbar Main Unit Soundbar Remote Control /

Batteries

Subwoofer

x 2

Power Cord

(Subwoofer, Soundbar)

AC/DC Adapter

(Soundbar)

HDMI Cable

x 2

(M4 x L10)

x 2

Wall Mount Guide Holder-Screw Screw

x 2

x 4

Bracket-Wall Mount Rubber-Foot

• For more information about the power supply and power consumption, refer to the label attached

to the product. (Label: Bottom of the Soundbar Main Unit)

• To purchase additional components or optional cables, contact a Samsung Service Centre or

Samsung Customer Care.

• For more information about the wallmount or rubber-foot, see pages 21~22.

• Design, specications, and App screen are subject to change without prior notice.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the back cover in the direction of the arrow

until it is completely removed. Insert 2 AA batteries

(1.5V) oriented so that their polarity is correct. Slide

the back cover back into position.

ENG - 6

02 PRODUCT OVERVIEW

Front Panel / Top Panel of the Soundbar

Volume Mic On/Off

Display

󰟳

Position the product

so that the

SAMSUNG logo is

located on the top.

Bottom Panel of the Soundbar

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

NETWORK ID SET

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

NETWORK ID SET

HDMI TO TV

(eARC/ARC)

HDMI IN

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

HDMI TO TV

(eARC/ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

NETWORK ID SET

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

NETWORK ID SET

HDMI TO TV

(eARC/ARC)

HDMI IN

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

HDMI TO TV

(eARC/ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

NETWORK ID SET

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

NETWORK ID SET

HDMI TO TV

(eARC/ARC)

HDMI IN

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

HDMI TO TV

(eARC/ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

NETWORK ID SET

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

NETWORK ID SET

HDMI TO TV

(eARC/ARC)

HDMI IN

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

HDMI TO TV

(eARC/ARC)

󰟴

󰟵

󰟶

󰟷 󰟸

󰟹

󰟺

󰟳

(Multi Function) Button

• In standby mode, press the (Multi

Function) button to turn on the Soundbar.

• Press the (Multi Function) button to

change the input source.

• Press the (Multi Function) button for

3 seconds to call Alexa. Say with the button

pressed to enable voice recognition.

󰟴

DIGITAL AUDIO IN (OPTICAL)

Connect to the digital (optical) output of an

external device.

󰟵

SERVICE

Connect a USB storage device to upgrade the

product's software.

󰟶

DC 19V

Connect the AC/DC power adapter.

(Power Supply In)

󰟷

NETWORK

Press to connect to a wireless network (Wi-Fi)

via the SmartThings app.

󰟸

ID SET

Press to connect the Soundbar to surround

speakers and a subwoofer wirelessly.

(The surround speaker is sold separately.)

󰟹

HDMI

Inputs digital video and audio signals

simultaneously using an HDMI cable.

Connect to the HDMI output of an external

device.

󰟺

HDMI TO TV (eARC/ARC)

Connect to the HDMI jack on a TV.

ENG - 7

03 USING THE REMOTE CONTROL

How to Use the Remote Control

VOL WOOFER

SOUNDBAR

SOUND

MODE

PAIR

󰟳

󰟴

󰟵

󰟶

󰟷

󰟹

󰟸

󰟺

󰟼

󰟻

󰟳

Power

Turns the Soundbar on and off.

• Auto Power Down Function

The unit turns off automatically in the following situations:

– In D.IN / HDMI / Wi-Fi / BT mode if there is no audio

signal for 18 minutes.

󰟴

(Source)

Press to select a source connected to the Soundbar.

󰟵

(Mute)

Press the (Mute) button to mute the sound.

Press it again to unmute the sound.

󰟶

SOUND MODE

You can select the desired sound mode by choosing

STANDARD, SURROUND, GAME PRO, or ADAPTIVE SOUND.

󰟷

Bluetooth PAIR

Switch the Soundbar to Bluetooth pairing mode. Press the

button and wait for the “BT PAIRING” screen to connect to a

new Bluetooth device.

󰟸

p (Play / Pause)

You can also play or pause music by pressing the button.

󰟹

Up/Down/Left/Right

Press Up/Down/Left/Right on the button to select or set functions.

󰟺

(Sound Control)

When pressed, the setting items such as TREBLE, BASS, SYNC, CENTER LEVEL, FRONT TOP LEVEL, and

VIRTUAL ON/OFF are displayed in sequence. The desired item can be adjusted using the Up/Down

buttons.

󰟻

WOOFER (BASS) LEVEL

Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the

woofer (bass) volume level to 0 (Default), press the button.

󰟼

VOLUME

Push the button up or down to adjust the volume.

ENG - 8

04 CONNECTING THE SOUNDBAR

Connecting Electrical Power and Subwoofer

Use the power components (1, 2, 3) to connect the Subwoofer and Soundbar to an electrical outlet in

the following order:

• For more information about the required electrical power and power consumption, refer to the

label attached to the product. (Label: Bottom of the Soundbar Main Unit)

1 2

3

Power Cord (Subwoofer) AC/DC Adapter (Soundbar) Power Cord (Soundbar)

NOTES

• Connect the Subwoofer power before connecting to the Soundbar.

The Subwoofer will be automatically connected when turning on the Soundbar.

• If you unplug and reconnect the power cord when the product is turned on, the Soundbar turns

on automatically.

• Make sure to rest the AC/DC Adapter at on a table or the oor. If you place the AC/DC Adapter

so that it is hanging with the AC cord input facing upwards, water or other foreign substances

could enter the Adapter and cause the Adapter to malfunction.

POWER

Rear of Subwoofer

1

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

NETWORK ID SET

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

NETWORK ID SET

HDMI TO TV

(eARC/ARC)

HDMI IN

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

HDMI TO TV

(eARC/ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

NETWORK ID SET

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

NETWORK ID SET

HDMI TO TV

(eARC/ARC)

HDMI IN

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI

HDMI TO TV

(eARC/ARC)

Bottom of the Soundbar Main Unit

DC 19V

2 + 3

Blue is On

The connection is

complete.

ENG - 9

Manually connecting the Subwoofer

Before performing the manual connection procedure below:

• Check whether the power cables for the Soundbar and subwoofer are connected properly.

• Make sure that the Soundbar is turned off.

1. Turn off the Soundbar main.

2. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.

5 Sec

Rear of Subwoofer Rear of Subwoofer

Blinking blue

fast

3. Press the Up button on the remote control for 5 seconds.

ID SET

SOUND

MODE

PAIR

5 Sec

4. Check if the LINK LED is solid blue (connection complete).

Blue is On

The LINK LED indicator stops blinking and

glows a solid blue when a connection is

established between the Soundbar and the

Wireless Subwoofer.

ENG - 10

LED Indicator Lights on the Rear of Subwoofer

LED Status Description Resolution

Blue

On

Successfully connected

(normal operation)

-

Blinking

Recovering the

connection

Check if the power cable attached

to the main Soundbar unit is

connected properly or wait about

5 minutes. If blinking persists, try

manually connecting the

subwoofer. See page 9.

Red

On

Standby (with the

Soundbar main unit

turned off)

Check if the power cable attached

to the main Soundbar unit is

connected properly.

Connection failed

Connect again. See the

instructions for manual

connection on page 9.

Red and blue

Blinking Malfunction

See the contact information for

the Samsung Service Centre in

this manual.

ENG - 11

05 USING A WIRED CONNECTION TO THE TV

Method 1. Connecting with HDMI

CAUTION

• When both the HDMI cable and optical cable are connected, the HDMI signal is received rst.

• To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals

marked ARC. Otherwise, the TV sound may not be output.

• Be sure to use the cable with the premium HDMI certication logo. In addition, make sure that

the cable is a certied Type A, high-speed HDMI Ethernet cable. (HIGH SPEED HDMI CABLE

WITH ETHERNET)

Connecting the TV that supports HDMI ARC (Audio Return Channel)

HDMI IN

(ARC)

HDMI TO TV

(eARC/ARC)

SERVICE

DC 19V

Connect to the HDMI IN

(ARC) port of your TV.

HDMI Cable

Bottom of the Soundbar

Connect to the HDMI TO TV

(eARC/ARC) port of the Soundbar

main unit.

Top of the Soundbar

TV ARC

1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the gure.

2. Turn on the Soundbar and TV.

3. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV

sound.

• When the TV sound is not output, press the (Multi Function) button at the top of the

Soundbar or the (Source) button on the remote control to select the “D.IN” mode. The

screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.

• When connecting a TV that supports the eARC function, “eARC” appears on the display and the

sound is heard.

ENG - 12

• To connect with eARC, the eARC function in the TV menu should be set to On. Refer to the TV

user manual for details on setting. (e.g. Samsung TV : Home ( ) → Settings ( ) → Sound →

Expert Settings → HDMI-eARC Mode (Auto))

• If “TV ARC” does not appear in the display window of the Soundbar main unit, conrm that the

HDMI cable is connected to the correct port.

• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.

NOTES

• When you connect the TV that supports the HDMI ARC (Audio Return Channel) to the Soundbar

with an HDMI cable, you can transmit the digital video and audio data without connecting a

separate optical cable.

• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one

whose diameter is less than 14 mm.

• This function is not available if the HDMI cable does not support ARC.

• When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on

your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the

setting on the TV is changed, you will experience better sound quality. (The TV menu may use

different words for Dolby Digital and PCM depending on the TV manufacturer.)

Method 2. Connecting using an Optical Cable

Pre-connection Checklist

• When both the HDMI cable and optical cable are connected, the HDMI signal is received rst.

• When you use an optical cable and the terminals have covers, be sure to remove the covers.

Bottom of the Soundbar

OPTICAL OUT

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

D.IN

Optical Cable

(not supplied)

Top of the Soundbar

ENG - 13

1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the

Soundbar and the OPTICAL output port on the TV with the optical cable (not supplied), as shown in

the gure.

2. Turn on the Soundbar and TV.

3. Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the

remote control to select the “D.IN” mode.

4. The TV sound is output from the Soundbar.

Using the Q-Symphony Function

For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for

optimum surround effect. When the Soundbar is connected, the menu, “TV+Soundbar” appears under

the Sound Output menu of the TV. Select the corresponding menu.

D.IN

TV menu

OR

Optical Cable (not supplied)

HDMI Cable

• TV menu example: TV series name + [AV] Soundbar series name (HDMI)

NOTES

• It can operate according to the Codec supported by TV.

• This function is supported only when the HDMI Cable or Optical Cable (not supplied) is connected.

• This function is available in Samsung TVs released in 2020 and some Soundbar models.

ENG - 14

06 USING A WIRELESS CONNECTION TO THE TV

Method 1. Connecting via Bluetooth

When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of

cabling.

• Only one Samsung TV can be connected at a time.

• Samsung TV that supports Bluetooth can be connected. Check the specications of your TV.

OR

Top of the Soundbar

BT PAIRING

5 Sec

SOUND

MODE

PAIR

The initial connection

1. Press the PAIR button on the Soundbar remote control to enter the “BT PAIRING” mode.

(OR)

a. Press the (Multi Function) button on the top panel and then select “BT”.

“BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if

there is a connect record.

b. When “BT READY” appears, press and hold the (Mic On/Off) button on the top panel of

the Soundbar for more than 5 seconds to display “BT PAIRING”.

2. Select Bluetooth mode on the Samsung TV.

(e.g. Home ( )  Settings ( )  Sound  Sound Output  Bluetooth Speaker List 

[AV] Samsung Soundbar Q800T (Bluetooth))

3. Select “[AV] Samsung Soundbar Q800T” from the list on TV’s screen.

An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device

list. To connect the Samsung TV to the Soundbar, select the message, and then establish a

connection.

• When the Samsung TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.

4. You can now hear Samsung TV sound from the Soundbar.

• After you have connected the Soundbar to your Samsung TV the rst time, use the “BT READY”

mode to reconnect.

ENG - 15

If the device fails to connect

• If you have an existing Soundbar (e.g., [AV] Samsung Soundbar Q800T) on the list of speakers

on the Samsung TV, delete it.

• Then repeat steps 1 through 3.

Disconnecting the Soundbar from the Samsung TV

Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the

remote control to select the mode other than “BT”.

• Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.

(The time required may differ, depending on the Samsung TV model.)

What is the difference between BT READY and BT PAIRING?

• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was

connected before.

• BT PAIRING : In this mode, you can connect a new device to the Soundbar.

(Press the PAIR button on the Soundbar remote control or press and hold the (Mic On/Off)

button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.)

Notes on Bluetooth connection

• Locate a new device within 1 m to connect via Bluetooth communication.

• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

• The Soundbar automatically turns off after 18 minutes in the Ready state.

• The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

– If there is a strong electrical eld around the Soundbar.

– If several Bluetooth devices are simultaneously paired with the Soundbar.

– If the Bluetooth device is turned off, not in place, or malfunctions.

• Electronic devices may cause radio interference. Devices that generate electromagnetic waves

must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

ENG - 16

Method 2. Connecting via Wi-Fi

Pre-connection Checklist

• Wi-Fi connection is available only on Samsung TV.

• Check whether the wireless router (Wi-Fi) is turned on and the TV is connected to the router.

• The TV and Soundbar must be connected to the same wireless network (Wi-Fi).

• If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi

connection between the TV and Soundbar. Contact your Internet service provider for details.

• Because the menus may differ depending on the year of manufacture, refer to your TV manual.

• To connect the TV to the Soundbar via Wi-Fi, connect the Soundbar to the wireless router rst.

See page 19, for details on how to establish a Wi-Fi connection.

1. For more information about Wi-Fi connection to the Soundbar, see page 19, “Method 2.

Connecting via Wi-Fi (Wireless Network)”.

2. Change the input source of the TV by using the Audio menu to Soundbar.

• Samsung TVs released in 2017 or later

Home ( )  Settings ( )  Sound  Sound Output  [AV] Samsung Soundbar Q800T

(Wi-Fi)

ENG - 17

07 CONNECTING AN EXTERNAL DEVICE

Method 1. Connecting using an HDMI Cable (Capable of Dolby

Atmos decoding and playback)

HDMI IN

(ARC)

HDMI

HDMI TO TV

(eARC/ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

DC 19V

HDMI OUT

Top of the Soundbar

Bottom of the Soundbar

External Device

HDMI

HDMI Cable

󰟳

HDMI Cable

󰟴

󰟵

• 󰟳󰟴 Connect the HDMI cable → Turn on the Soundbar, External Device, and TV 

󰟵 (Multi Function) → Select the “HDMI” mode

Method 2. Connecting using an Optical Cable

OPTICAL OUT

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

Bottom of the Soundbar

󰟴

Optical Cable

(not supplied)

Top of the Soundbar

BD / DVD player / Set-top

box / Game console

󰟳

D.IN

• 󰟳 Connect the optical cable → Turn on the Soundbar and External Device → 󰟴 (Multi

Function) → Select the “D.IN” mode

NOTE

• For more information about the external device connection, refer to the Soundbar’s User Guide on

the Samsung website (www.samsung.com/support).

ENG - 18

08 CONNECTING A MOBILE DEVICE

Method 1. Connecting via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of

cabling.

• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically

turns on.

OR

Top of the Soundbar

BT PAIRING

5 Sec

SOUND

MODE

PAIR

Mobile device

The initial connection

• When connecting to a new Bluetooth device, make sure the device is within 1 m distance.

1. Press the PAIR button on the Soundbar remote control to enter the “BT PAIRING” mode.

(OR)

a. Press the (Multi Function) button on the top panel and then select “BT”.

“BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if

there is a connect record.

b. When “BT READY” appears, press and hold the (Mic On/Off) button on the top panel of

the Soundbar for more than 5 seconds to display “BT PAIRING”.

2. On your device, select “[AV] Samsung Soundbar Q800T” from the list that appears.

• When the Soundbar is connected to the Mobile device, [Mobile Device Name] → “BT” appears in

the front display.

3. Play music les from the device connected via Bluetooth through the Soundbar.

• After you have connected the Soundbar to your mobile device the rst time, use the “BT

READY” mode to reconnect.

For more information about Bluetooth connections, refer to “Connecting via Bluetooth” on

page 14.

ENG - 19

Method 2. Connecting via Wi-Fi

(Wireless Network)

To connect a Soundbar to a mobile device via a

wireless network (Wi-Fi), the SmartThings app is

required.

SmartThings App

1. Connect your mobile device (smartphone,

tablet, etc.) to the Wi-Fi network the TV is

connected to.

2. Install and launch the SmartThings app on

your mobile device (smartphone, tablet, etc.).

3. Follow the instructions in the app screen on

the mobile device to connect the Soundbar

to your Wi-Fi network.

ConguringAmazonAlexa

Using Alexa, you can play music, listen to news,

see weather forecasts, and control home

appliances.

To use Amazon Alexa, an Amazon account is

required to connect the Soundbar over the

network.

1. Install the SmartThings app on your mobile

device and then launch it.

2. Enter the Alexa account by following the

instructions on the app and then log in the

service.

3. Call Alexa or press the (Multi Function)

button on the Soundbar for 3 seconds to use

the Alexa service.

• Press the (Multi Function) button for

3 seconds to call Alexa. Say with the

button pressed to enable voice

recognition.

CAUTION

• Amazon Alexa is a service provided by

Amazon.

• This service is available only in some

languages but not in other countries or

regions.

NOTE

• To learn about using the SmartThings app

and connecting to other devices (from

Amazon, Wireless Rear Speaker Kit

(SWA-9000S - Sold separately), etc), refer to

the FULL MANUAL for your Soundbar on the

Samsung web site

(www.samsung.com/support).

ENG - 20

Using the Tap Sound

Tap the Soundbar with your mobile device to play the sound of content on the mobile device through

the Soundbar.

• This function may not be supported, depending on the mobile device.

• This function is only compatible with Samsung mobile devices with Android 8.1 or later.

Mobile device

SmartThings App

Top of the Soundbar

1. Turn on the Tap Sound function on your mobile device.

• For details on how to turn on the function, refer to “Setting the Tap Sound function” below.

2. Tap the Soundbar with the mobile device. Select “Start now” in the displayed message window.

A connection is established between the mobile device and Soundbar via Bluetooth.

3. Play the sound of content on the mobile device through the Soundbar.

• This function connects a mobile device to the Soundbar via Bluetooth by detecting vibration

that occurs when the device touches the Soundbar.

• Make sure the mobile device does not tap a sharp corner of the Soundbar. The Soundbar or

mobile device may become scratched or damaged.

• It is recommended that the mobile device be covered with a case. Lightly tap the wide area in

the upper portion of the Soundbar, without using excessive force.

• To use this function, update the SmartThings app to the latest version.

The function may not be supported, depending on the app version.

Setting the Tap Sound function

Use the SmartThings app to turn on the Tap View, Tap Sound function.

1. On the mobile device, run the SmartThings app.

2. Select ( → ) in the SmartThings app screen displayed on the mobile device.

3. Set “Tap View, Tap Sound” to On to allow the function to work when a mobile device moves close to

the Soundbar. The function is turned on.

NOTES

• When the mobile device is in power-saving mode, the Tap Sound function does not work.

• The Tap Sound function may not work if there are devices near the Soundbar that cause radio

interference such as electric devices. Make sure devices that may cause radio interference are

placed at a sufcient distance away from the Soundbar.

La pagina si sta caricando...

Samsung HW-Q800T Manuale del proprietario

Samsung HW-Q800T Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti