Panasonic CQ-C1110W Manuale utente
- Categoria
- Ricevitori multimediali per auto
- Tipo
- Manuale utente
Questo manuale è adatto anche per
YFM284C405ZA TAMACO0104-0 Printed in China
Matsushita Electric Industrial Co., Ltd.
Web site: http://www.panasonic.co.jp/global/
Operating Instructions
ààççëëííêêììääññààüü èèéé ùùääëëèèããììÄÄííÄÄññàààà
POWER
CLOCK
CQ-C1110W
DISP
SQ
MUTE
789101112SCAN
R
A
N
D
O
M
1
2
3
46
APM
BAND
SRC
5
V
O
L
U
M
E
/
P
U
S
H
S
E
L
REP
TUNE
TRACK
D
•
M
Removable Front Panel CD Player/Receiver
CD-ÔÎÂÂ/ÂÒË‚Â ÒÓ Ò˙ÂÏÌÓÈ Ô‰ÌÂÈ Ô‡ÌÂθ˛
CQ-C1110W/C1100W
•Please read these instructions carefully before using this product and keep this manual for future reference.
•
è‰ ̇˜‡ÎÓÏ ˝ÍÒÔÎÛ‡Ú‡ˆËË ÔË·Ó‡ ÔÓÒËÏ Ú˘‡ÚÂθÌÓ ËÁÛ˜ËÚ¸ ̇ÒÚÓfl˘Û˛ ËÌÒÚÛÍˆË˛ Ë ÒÓı‡ÌËÚ¸  ̇
ÔÓθÁÓ‚‡ÌË ̇ ·Û‰Û˘ÂÂ.
(CQ-C1110W)
2 3
CQ-C1110W/C1100WCQ-C1110W/C1100W
E
N
G
L
I
S
H
Safety information
àÌÙÓχˆËfl ‰Îfl ·ÂÁÓÔ‡ÒÌÓÒÚË
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPLIANCE TO RAIN, SPLASH-
ING, DRIPPING OR MOISTURE.
CAUTION!
THIS PRODUCT IS A CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
BY YOURSELF. REFER SERVICING TO QUALI-
FIED PERSONNEL.
óÚÓ·˚ ËÁ·Â„‡Ú¸ ËÒ͇ ÔÓʇ‡ ËÎË
˝ÎÂÍÚÓ¯Ó͇, ËÒÔÓθÁÛÈÚ ÚÓθÍÓ
ÍÓÏÔÓÌÂÌÚ˚, ‚ıÓ‰fl˘Ë ‚ ÍÓÏÔÎÂÍÚ.
èêÖÑìèêÖÜÑÖçàÖ:
Ñãü ìåÖçúòÖçàü êàëäÄ èéÜÄêÄ, ìÑÄêÄ
íéäÄ àãà èéÇêÖÜÑÖçàü áÄôàíàíú
ÄèèÄêÄí éí èéèÄÑÄçàü ÑéÜÑü, ÅêõáÉ,
äÄèÖãú à ÇãÄÉà.
ÇçàåÄçàÖ!
çÄëíéüôÖÖ àáÑÖãàÖ èêÖÑëíÄÇãüÖí
ëéÅéâ ãÄáÖê äãÄëëÄ I.
èéèõíäÄ ìèêÄÇãÖçàü, êÖÉìãàêéÇäà àãà
ÑÖâëíÇàü, äéíéêõÖ çÖ éÉéÇéêÖçõ
çàÜÖ, åéÜÖí èéÇãÖóú áÄ ëéÅéâ
éÅãìóÖçàÖ êÄÑàÄñàÖâ.
áÄèêÖôÖçé éíäêõÇÄíú äêõòäà
ÄèèÄêÄíÄ à èêéÇéÑàíú
ëÄåéëíéüíÖãúçõâ êÖåéçí. ëãÖÑìÖí
éÅêÄíàíúëü ä äÇÄãàîàñàêéÇÄççéåì
èÖêëéçÄãì.
“ìÒÚ‡ÌÓ‚ÎÂÌÌ˚È ÔÓËÁ‚Ó‰ËÚÂÎÂÏ ‚
ÔÓfl‰Í Ô.2 ÒÚ.5 θÌÓ„Ó
á‡ÍÓ̇ êî “é Á‡˘ËÚ ԇ‚
ÔÓÚ·ËÚÂÎÂÈ” ÒÓÍ ÒÎÛÊ·˚ ‰Îfl
‰‡ÌÌÓ„Ó ËÁ‰ÂÎËfl ‡‚ÂÌ 7 „Ó‰‡Ï Ò
‰‡Ú˚ ÔÓËÁ‚Ó‰ÒÚ‚‡ ÔË ÛÒÎÓ‚ËË, ˜ÚÓ
ËÁ‰ÂÎË ËÒÔÓθÁÛÂÚÒfl ‚ ÒÚÓ„ÓÏ
ÒÓÓÚ‚ÂÚÒÚ‚ËÂ Ò Ì‡ÒÚÓfl˘ÂÈ
ËÌÒÚÛ͈ËÂÈ ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË Ë
ÔËÏÂÌËÏ˚ÏË ÚÂıÌ˘ÂÒÍËÏË
Òڇ̉‡Ú‡ÏË.”
çÄ êìëëäéå üáõäÖ
Page
ëÚ‡Ìˈ‡
Contents
Safety information............................................................................................................................ 2
Contents........................................................................................................................................... 3
Precautions ...................................................................................................................................... 4
Features............................................................................................................................................ 4
Accessories ...................................................................................................................................... 5
Differences between 2 models.......................................................................................................... 5
Recommended optional systems ..................................................................................................... 5
General............................................................................................................................................. 6
Clock setting..................................................................................................................................... 7
Radio................................................................................................................................................ 8
CD player........................................................................................................................................ 10
Anti-Theft system ........................................................................................................................... 12
Installation...................................................................................................................................... 13
Electrical connections..................................................................................................................... 16
Speaker connections ...................................................................................................................... 18
Fuse................................................................................................................................................ 18
Remote control unit (only for CQ-C1110W) ................................................................................... 19
Troubleshooting ............................................................................................................................. 20
Maintenance................................................................................................................................... 24
Specifications................................................................................................................................. 25
ëÓ‰ÂʇÌËÂ
àÌÙÓχˆËfl ‰Îfl ·ÂÁÓÔ‡ÒÌÓÒÚË................................................................................................................... 2
ëÓ‰ÂʇÌË .................................................................................................................................................. 3
àÌÒÚÛÍÚË‚Ì˚ Û͇Á‡ÌËfl ........................................................................................................................... 26
éÚ΢ËÚÂθÌ˚ ˜ÂÚ˚................................................................................................................................ 26
ÄÍÒÂÒÒÛ‡˚.................................................................................................................................................. 27
éÚ΢Ëfl ‰‚Ûı ÏÓ‰ÂÎÂÈ ............................................................................................................................... 27
êÂÍÓÏẨÛÂÏ˚ ÓÔˆËÓÌÌ˚ ÒËÒÚÂÏ˚ ....................................................................................................... 27
鷢ˠ҂‰ÂÌËfl ......................................................................................................................................... 28
ê„ÛÎËӂ͇ ˜‡ÒÓ‚...................................................................................................................................... 29
ꇉËÓÔËÂÏÌËÍ ........................................................................................................................................... 30
CD ÔÎÂÂ...................................................................................................................................................... 32
ëËÒÚÂχ Ô‰ÓÚ‚‡˘ÂÌËfl ͇ÊË.............................................................................................................. 34
ìÒÚ‡Ìӂ͇ .................................................................................................................................................... 35
ëıÂχ ˝ÎÂÍÚ˘ÂÒÍËı ÒÓ‰ËÌÂÌËÈ ............................................................................................................ 38
èÓ‰Íβ˜ÂÌË „ÓÏÍÓ„Ó‚ÓËÚÂÎÂÈ ............................................................................................................ 40
è·‚ÍËÈ Ô‰Óı‡ÌËÚÂθ........................................................................................................................... 40
èÛÎ¸Ú ‰ËÒڇ̈ËÓÌÌÓ„Ó ÛÔ‡‚ÎÂÌËfl (ÚÓθÍÓ ‰Îfl ÏÓ‰. CQ-C1110W)....................................................... 41
ÑÂÙÂÍÚӂ͇................................................................................................................................................. 42
íÂıÌ˘ÂÒÍÓ ӷÒÎÛÊË‚‡ÌËÂ....................................................................................................................... 46
íÂıÌ˘ÂÒÍË ı‡‡ÍÚÂËÒÚËÍË..................................................................................................................... 47
E
N
G
L
I
S
H
çÄ êìëëäéå üáõäÖ
4 5
CQ-C1110W/C1100WCQ-C1110W/C1100W
1
E
N
G
L
I
S
H
Recommended optional systems
❒ How to build the optimal audio system for you ...
It is the shortcut for getting the best quality sound to use the Panasonic audio component system.
For details, Please contact your local dealer or nearest Panasonic service center.
• External Amplifiers
(option)
CY-M7052
• Mobile Speaker Systems
(option)
EAK-A46, CJ-A572
Differences between 2 models
Note: This operating instruction manual is for 2 models CQ-C1110W and CQ-C1100W. All illustrations through-
out this manual represent model CQ-C1110W unless otherwise specified. The following table describes the dif-
ferences between 2 models.
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
Operating
Instructions
(YFM284C405ZA)
Q'ty: 1
Removable Face
Plate Case
(YFC054C061ZA)
Q'ty: 1
PWR
MODE
PRG
TUNE
TRACK
Car Audio
BAND/DISC UP
VOL
MUTE
(ATT)
Remote Control Unit
(YEFX9992013B)
Q'ty: 1
CR2025 Lithium
Battery
Q'ty: 1
Accessories
• The numbers in parentheses indicate order numbers. In case that any of these parts is/are missing, please
inform your dealer of the number(s) and its name(s).
• Accessories and their parts numbers are subject to modification without prior notice due to improvements.
• Installation Hardware................................................................................................ 1 set (a page 13)
Only for CQ-C1110W
Model CQ-C1110W CQ-C1100W
Remote control unit Included
Not applicable
Body color Plating Black Coating Silver
Illumination color for D
·
M Blue Red
/REP/
s
/
d
Features
❐Precautions
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this prod-
uct will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical
engineering, manufactured with carefully selected components and assembled by people who take pride in
their work. Once you discover the quality, reliability, and value we have built into this product, you too will be
proud to be a member of our family.
When driving
Keep the volume level low enough to be aware of road and traffic conditions.
When washing your car
Do not expose the product, including the speakers and CDs, to water or exces-
sive moisture. This could cause electrical shorts, fire, or other damage.
When parked
Parking in direct sunlight can produce very high temperatures inside your car.
Give the interior a chance to cool down before switching the unit on.
Use the proper power supply
This product is designed to operate with a 12 V DC, negative ground battery
system (the normal system in a North American car).
Disc mechanism
Do not insert coins or any small objects. Keep screwdrivers and other metallic
objects away from the disc mechanism and disc.
For installation
The product should be installed in a horizontal position with the front end up at
a convenient angle, but not more than 30˚.
• CD-R/CD-RW playable
• New simple-setting tone control “SQ” (a page 6)
• 4-channel high power amplifier (45 W x 4 max.)
• 2.5 V preamplifier outputs (rear)
• 18 FM and 6 AM presets with preset scan (a page 9)
• Anti-Theft system provided by the removable faceplate (a page 12)
Features
2
E
N
G
L
I
S
H
POWER
CLOCK
CQ-C1110W
D
ISP
SQ
MUTE
789101112SCAN
R
A
N
D
O
M
1
2
3
46
APM
BA
N
D
SRC
5
V
O
L
U
M
E
/
P
U
S
H
S
E
L
REP
TUNE
TRACK
D
•
M
DISP
MUTE
SRC
POWER
CLOCK
CQ-C1110W
D
ISP
SQ
MUTE
789101112SCAN
R
A
N
D
O
M
1
2
3
46
APM
BA
N
D
SRC
5
V
O
L
U
M
E
/
P
U
S
H
S
E
L
REP
TUNE
TRACK
D
•
M
D
ISP
6 7
CQ-C1110W/C1100WCQ-C1110W/C1100W
3
E
N
G
L
I
S
H
4
E
N
G
L
I
S
H
General
Mute
Press [MUTE] to mute the sound completely.
Press [MUTE] again or turn the knob clockwise
to cancel.
Volume
Turn [VOLUME] clockwise to increase
volume, and counterclockwise to
decrease volume.
Volume level (0 to 40)
(default: 18)
Power
Turn the key in the ignition
until the accessory indica-
tor lights.
Power on: Press [SRC]
(POWER).
Power off: Press [SRC]
(POWER) again
and hold.
ACC
ON
MUTE
ST
Display change
Press [DISP] (display) to switch to the clock display.
Note: Please refer to next page when “AdJ” is displayed.
When the power is off:
No display Clock display
Mute indicator
Up
Down
Remote control sensor (➡ page 19)
(only for CQ-C1110W: CQ-C1100W has no remote control function.)
SQ indicator
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music
type.
Press [SQ] to select a sound type as follows:
SQ -- (default) flat frequency response:
does not emphasize.
SQ - 1 (ROCK) speedy and heavy sound:
exaggerates bass and treble.
SQ - 2 (POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
SQ - 3 (VOCAL) clear sound:
emphasizes middle tone and
slightly emphasizes treble.
Clock setting
Note: If no operation takes place for more than 5 seconds
in audio mode (2 seconds in volume mode), the display
returns to the regular mode.
Audio mode
(Bass/Treble/Balance/Fader)
Volume Bass
Treble
Balance
Fader
Regular mode
Push [SEL] to select the audio mode.
Turn [VOLUME] clockwise to increase volume,
and counterclockwise to decrease volume.
Note: If the fader is set to front, the pre-amp.
output (rear) is decreased.
[DISP] (CLOCK)
The 24-hour system is used for the clock.
[k TUNE], [l TUNE] (Hours, minutes)
Hours
w Press and hold [DISP] (CLOCK) for more than
2 seconds.
Initial time
q Press [DISP] (CLOCK).
(Hours blink.)
e Press [k TUNE] or [l TUNE].
(Hours set.)
Minutes
r Press [DISP] (CLOCK).
(Minutes blink.)
t Press [k TUNE] or [l TUNE].
(Minutes set.)
y Press [DISP] (CLOCK).
Note: Press and hold [k TUNE] or [l TUNE] to
change numbers rapidly.
Time reset
Press and hold [DISP] (CLOCK) for more than
2 seconds to activate the time setting mode to
reset the time.
Then, repeat steps e to y.
(End.)
push
q
w
“AdJ” is displayed when the clock is not adjusted.
Bass:
Adjustable range: –12 dB to +12 dB (by 2 dB step)
Treble:
Adjustable range: –12 dB to +12 dB (by 2 dB step)
Balance:
Adjustable range: 1 to 15 (by 1 step) Balance center
R (right speaker) or L (left speaker)
Fader:
Adjustable range: 1 to 15 (by 1 step) Fader center
F (front speaker) or R (rear speaker)
(default: 0 dB)
(default: 0 dB)
(default)
(default)
(default)
Notes:
• If no operation takes place for more than 2 seconds in the SQ mode, the display returns to the regular mode.
•
Settings of SQ, bass/treble are influenced one another. If the influence mentioned above causes distortion to audio
signal, readjust bass/treble or volume
(➡ page 7).
BA
N
D
SRC
D
•
M
POWER
CLOCK
CQ-C1110W
DISP
SQ
MUTE
789101112SCAN
R
A
N
D
O
M
1
2
3
46
APM
BA
N
D
SRC
5
V
O
L
U
M
E
/
P
U
S
H
S
E
L
REP
TUNE
TRACK
D
•
M
w
POWER
CLOCK
CQ-C1110W
D
ISP
SQ
MUTE
789101112SCAN
R
A
N
D
O
M
1
2
3
46
APM
BA
N
D
SRC
5
V
O
L
U
M
E
/
P
U
S
H
S
E
L
REP
TUNE
TRACK
D
•
M
D
ISP
1
2
3
4
BA
N
D
65
8 9
CQ-C1110W/C1100WCQ-C1110W/C1100W
5
E
N
G
L
I
S
H
6
E
N
G
L
I
S
H
Radio
Radio
CD player
Manual tuning
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Seek tuning
Press and hold ...
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Tuning will automatically stop when the signals of the next broadcast station are received.
Radio mode
Press [SRC] (source) to change to the radio mode.
Direct Memory (D
·
M)
Your favorite FM/AM radio station can be memorized in the [D
·
M] button and you can call back radio stations
just by pressing the button whatever the current sound source is, even if the power is off.
Default : FM 87.5 MHz
Band
Press [BAND] to change the band.
Press [D·M]. (Press again to cancel)
¡The direct memoried station is received.
Recalling the direct memory
D-M
ST
MONO
LOCA
FM Stereo indicator
e
Release [D
·
M] button. Then, new station will be over-
written on existing saved station.
Press and hold [D
·
M] until the Frequency display blinks.
Select the station in Radio mode (➡ above)
Memorize
D-MD-MD-MD-M
D-MD-M
D-M
blinks
Band
Press [BAND] to select a desired band. (➡ page 8)
Preset station setting
Up to 6 stations each can be saved in the FM1, FM2,
FM3 and AM preset station memories.
Note: Existing saved stations are overwritten with
new stations after following this procedure.
Display change
Press [DISP] (display) to switch to the clock display.
Caution: To ensure safety, never attempt to preset
stations while you are driving.
Manual preset memory
Use manual or seek tuning to find a station.
(➡ page 8)
Press and hold one of the preset buttons
from [1] to [6] until the display blinks once.
Auto Preset Memory (APM)
Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
• The 6 stations with good reception will be automatically saved in the memory
under preset buttons from [1] to [6].
• Once set, the preset stations are sequentially scanned for 5 seconds each.
Preset station calling
Press the corresponding preset button from [1] to
[6] to tune in a preset station.
q
blinks once
D
·
M indicator
ST
MONO
LOCA
Frequency
Clock display
POWER
CLOCK
CQ-C1110W
DISP
SQ
MUTE
789101112SCAN
R
A
N
D
O
M
1
2
3
46
APM
BA
N
D
SRC
5
V
O
L
U
M
E
/
P
U
S
H
S
E
L
REP
TUNE
TRACK
D
•
M
SQ
1
2
3
4
BA
N
D
65
REP
POWER
CLOCK
CQ-C1110W
D
ISP
SQ
MUTE
789101112SCAN
R
A
N
D
O
M
1
2
3
46
APM
BAND
SRC
5
V
O
L
U
M
E
/
P
U
S
H
S
E
L
REP
TUNE
TRACK
D
•
M
DISP
SRC
10 11
CQ-C1110W/C1100WCQ-C1110W/C1100W
7
E
N
G
L
I
S
H
8
E
N
G
L
I
S
H
CD player
TRACK
DISC
Press [u] (eject) to stop CD play and eject the disc.
During disc ejection, “EJ” (eject) will be displayed.
Disc insert and playback
Stop and disc eject
Playback will start automatically after the player recognized the
loaded disc as an ordinary music CD. (When a CD-R or CD-RW
which has CD-DA formatted data as the same as an ordinary music
CD is loaded, this player recognizes it as an ordinary music CD.)
“LOAd” will be displayed until the disc is loaded.
Notes:
• Do not insert a disc when indicator lights.
• The power will be turned on automatically when a disc is loaded.
DISC
Display change
Press [DISP] (display) to switch to the clock display.
Radio
CD player
CD player mode
Press [SRC] (source) to change to the CD play mode.
Playback will start automatically.
TRACK TRACK
DISC DISC
Playing time Track number Clock display
Listening to a CD
<CD player display>
Track playing time
Track number
<Disc indicator>
• lights when the disc is loaded.
• Do not insert a disc when “DISC”
indicator lights.
Label side
[u] (eject)
Caution:
• Only 12 cm CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
•This unit does not support CD text display.
• This unit does not support MP3/WMA disc playback.
• Refer to page 24 about notes on CD-Rs/RWs.
• This unit is not designed for any 8 cm disc.
• If you insert an 8 cm disc and can not eject it, turn ACC of your car off once and turn it on again, then
press [u] (eject).
• Do not use irregular shaped discs.
• Do not use discs that have a seal or label attached.
• Do not insert foreign matter into the disc slot.
Direct track
selection
•Press a track number button
from [1] to [6].
The corresponding track starts
playing.
•Press and hold a track number
button from [1] to [6] ([7] to
[12]) for more than 2 sec-
onds.
The corresponding track starts
playing.
Scan Play
C1
Repeat play
C2
Random play
C3
Pause (y/ 5)
Press [BAND] (y/ 5) to pause.
Press [BAND] (y/ 5) again to resume
the playback.
Track selection
[d TRACK]: Advance to the next track.
[s TRACK]: Back to the beginning of the current track.
Back to the previous track. (Press twice.)
Random
play
C3
•Press and hold [REP] (RANDOM) for more
than 2 seconds.
All the tracks are played in random order.
•Press and hold [REP] (RANDOM) again to
cancel.
Scan play
C1
Repeat
play
C2
•Press [REP].
The current track is repeated.
•Press [REP] again to cancel.
TRACK
R
DISC
TRACK
DISC
TRACK
REP
DISC
R 5 : Random indicator
blinks
REP: Repeat indicator
Track search
Press and hold ...
[d TRACK]: Fast forward
[s TRACK]: Fast backward
Release to resume the regular play.
•Press and hold [SQ] (SCAN),for more than 2
seconds.
The first 10 seconds of each track on the disc
are played in sequence.
•Press and hold [SQ] (SCAN) again to cancel.
DISC
12 13
CQ-C1110W/C1100WCQ-C1110W/C1100W
9
E
N
G
L
I
S
H
10
E
N
G
L
I
S
H
M
Anti-Theft system
fInstall the removable face
plate
q Slide the left side of the removable face plate in
place.
w Press the right end of the removable face plate
until “click” is heard.
Caution:
• This face plate is not waterproof. Do not expose it to water or excessive moisture.
• Do not remove the face plate while driving your car.
• Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
• Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical con-
tacts.
• If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
Place the removable
face plate into case
q Gently press the bottom of the case and
open the cover. Place the face plate into
the case and take it with you when you
leave the car.
w
q
Removable face plate case
Tab
Cutout
Remove the removable
face plate
Switch off the power of the unit.
qPress []. The remov-
able face plate will be
opened.
w Push the face plate to
either the right or left.
e Pull it out toward you.
q Press
q
w
Contact
w
Release button
Q’tyItemNo. Diagram
Installation hardware
Installation
• Before installation, check the radio operation with
antenna and speakers.
• Disconnect the cable from the negative (–) battery ter-
minal (see caution below).
• Unit should be installed in a horizontal position with the
front end up at a convenient angle, but not more than
30°.
• Remove Mounting Collar q and Trim Plate u from
the main unit temporarily, which are already mounted
at shipment*.
Dashboard instal-
lation
Installation opening
The unit can be installed
in any dashboard having an opening as shown at right.
The dashboard should be 4.5 mm - 6 mm thick in
order to be able to support the unit.
Installation precautions
This product should be installed by a professional
installer, if possible.
In case of difficulty, please consult your nearest autho-
rized Panasonic Service Center.
1. This system is to be used only in a 12 V, DC battery
system (car) with negative ground.
2. Follow the electrical connections carefully
(➡ page 16). Failure to do so may result in damage
to the unit.
3. Connect the power lead (red) after all other connec-
tions are made.
4. Be sure to connect the battery lead (yellow) to the
positive terminal (+) of the battery or fuse block
(BAT) terminal.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
7. Please carefully read the operating and installation
instructions of the respective equipment before con-
necting it to this unit.
Preparation
30˚ or less
Caution: Various settings that have been stored
in the memory in other on-board equipment (car
navigation etc.) may be lost if the battery termi-
nals are disconnected.
Therefore, we recommend to make a record of
or to back up the settings before disconnecting
the terminals.
After completing installation of the main unit,
set the equipment again according to the record.
182 mm
53 m
m
Fire Wall of Car
w Hex. Nut
e Rear Support Strap
t Mounting Bolt
q Mounting Collar
r Tapping Screw
3 mmø
(a) Using the Rear Support Strap
Rubber Cushion
(Option)
t Mounting Bolt
q Mounting Collar
Rear Support Bracket
(Provided on the car)
(b) Using the Rubber Cushion (option)
q
1
1
1
1
1
1
1
2
Mounting Collar*
(FX0214C316ZA)
Hex. Nut (5 mmø)
(YJN994C002ZA)
Rear Support Strap
(YFG044C002ZA)
Tapping Screw (5 mmø×16 mm)
(XTT5+16AFK)
Mounting Bolt (5 mmø)
(YEJV014C002A)
Power Connector
(YEAJ02877)
Trim Plate*
C1110W: (YFC054C058ZA)
C1100W: (YFC054C057ZA)
Dismounting Plate
(YFX214C323ZA)
w
e
r
t
y
u
i
M
1
2
3
4
14 15
CQ-C1110W/C1100WCQ-C1110W/C1100W
11
E
N
G
L
I
S
H
12
E
N
G
L
I
S
H
Installation (Continued)
Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
Establish the rear connection of the
unit.
After fixing Mounting Bolt t and insert the
Power Connector y, fix the rear of the unit to
the car body by either method (a) or (b) shown
on the previous page.
Insert Trim Plate u.
After installation reconnect the neg-
ative (–) battery terminal.
First complete the electrical connections, and then
check them for correctness. (➡ page 16)
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
The included Mounting Collar
q is designed specially for
this unit. Do not use it to
attach any other model.
y Power Connector
Engage the both sides
Mounting Springs
(C) in the mounting
holes of the Mounting
Collar q firmly.
Mounting Spring
Mounting
Hole
q Mounting
Collar
Mounting Springs (C)
Mounting Holes
t Mounting Bolt
The tabs to be bent vary depending on the
car. To securely install the unit, fully bend
a number of the tabs so that there is no
rattling.
Example:
Tab
1
2
To Remove the unit
Switch off the power of the unit.
Remove the Trim Plate u with a screw-
driver.
qInsert the Dismounting Plate i along
the grooves on both sides of the main
unit until
“
click
”
is heard.
wPull out the unit while pushing the plates
further inside.
q Press
u Trim Plate
Screwdriver
Remove the unit pulling with both hands.
q
w
e
r
w
qInsert
wPull out
i Dismounting Plate
“Click”
Insert the tab
end in the
outer groove.
Contact
Release button
qPress []. The remov-
able face plate will be
opened.
w Push the face plate to
either the right or left.
e Pull it out toward you.
Remove the Removable
Face Plate.
IMPORTANT
When this unit is installed
in dashboard, ensure that
there is sufficient air flow
around the unit to prevent
damage from overheating,
do not block any ventilation
holes on the unit.
Power Connector
Antenna
6
(Yellow)
Battery lead
To the car battery, continuous +12 V DC
External Power Amplifier
CY-M7052
(option)
RCA Cord
(option)
System up
speakers
To remove the Fuse
Fuse (15 A)
(Red)
R (Red)
Power lead
To ACC power, +12 V DC
(Dark blue/white stripe)
(Dark blue)
(Black)
Ground lead
To a clean, bare metallic
part of car chassis.
(+)(–) (+)(–) (+)(–)(+)(–)
Left speaker
(Front)
Right speaker
(Front)
(White)
L (White)
(Gray) (Green) (Violet)(White/
black
stripe)
(Green/black
stripe)
(Violet/black
stripe)
(Gray/black
stripe)
FRONT SP REAR SP
Left speaker
(Rear)
Right speaker
(Rear)
Speaker lead
Preamp output connector (rear)
R (Red)
CQ-C1110W/C1100W
Amp. relay control power lead
(Max. 500 mA)
This lead is for connection to the power
amplifier.
ACC
Motor antenna
relay control lead
(To motor antenna)
(Max. 500 mA)
This lead is not intended
for use with switch actuated
power antenna.
Note: This lead is used for power
control when an external power
amplifier is connected. The power
supply of a power amplifier will be
activated when turning on the power of
this unit.
Note: The power antenna extends
automatically when turning on the
power of this unit.
BATTERY 15A
L (White)
C
1
3
2
Fuse
6
Power
connector
Control power extension lead
(option )
R (Red)
L (White)
16 17
CQ-C1110W/C1100WCQ-C1110W/C1100W
13
E
N
G
L
I
S
H
14
E
N
G
L
I
S
H
Electrical connections
Caution:
• This product is designed to operate with a 12 V DC, negative ground battery system.
•To prevent damage to the unit, be sure to follow the connection diagram below.
• Strip about 5mm of the lead ends for connection.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all
cables and keep cable terminals free from touching any metal parts.
• Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.
C If the fuse (rear panel) blows fre-
quently, they may be something
wrong with the unit or wiring.
Consult your nearest Panasonic
Service center for service.
Note:
• Use the optional extension lead to extend
the Amp. relay control power lead if needed.
• The extension lead should be soldered and
insulated with the vinyl tape.
POWER
MUTE
7
1
APM
BAND
SRC
V
O
L
U
M
E
/
P
U
S
H
S
E
L
18 19
CQ-C1110W/C1100WCQ-C1110W/C1100W
15
E
N
G
L
I
S
H
16
E
N
G
L
I
S
H
Speaker connections
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and
speakers.
L
R
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
L
R
L
R
L
R
<Right>
<Wrong>
(White)
(White
w/black stripe)
Chassis
(Gray
w/black stripe)
(Gray)
Chassis
• Use ungrounded speaker only.
• The maximum speaker input should be 45 W or more. (If used with the
optional power amplifier, the speaker input should be higher than the maxi-
mum amplifier output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected sepa-
rately using parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30
cm apart) from the antenna and antenna extension cord.
• Never connect the speaker cord
to the body of the car.
• Do not use a 3-wire type speak-
er system having a common
earth lead.
• Do not connect more than one
speaker to one set of speaker
leads (except for connecting to
a tweeter).
Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or con-
necting the unit directly without a fuse, could cause fire or damage to the unit.
If the fuse replacement fails, contact your nearest authorized Panasonic Service Center.
Battery notes
Remove and dispose of an old battery immediately.
Battery Information:
• Battery type: Panasonic lithium battery (CR2025)
• Battery life: Approximately 6 months with normal use (at room temperature)
Remote control unit
Battery installation
q Remove the battery holder.
Pull the battery holder by the position B while pushing
position A in the direction indicated by the arrow.
w Install the battery on the battery holder.
Place a battery in the holder with its “+” side facing up
as shown in the figure.
e Insert the battery holder.
Push the battery holder back into its original position.
Back side
Lithium battery
Battery holder
Position A
Position B
• Do not disassemble or short the battery. Do not throw a battery into a fire.
• Keep batteries away from children to avoid the risk of accidents.
• Be careful to observe proper local disposal rules when you dispose of batteries.
Control reference guide
Buttons of the remote control function in the same way as the controls on the main unit of the reference page.
Point the remote control unit at the main unit’s sensor.
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a
fire.
[MUTE]
(Mute)
(➡ page 6)
[j VOL] [i VOL]
(Volume )
(➡ page 6)
[k TUNE] [l TUNE]
[a TRACK] [f TRACK]
(Tune/track selection/track search)
(➡ pages 8, 11)
PWR
MODE
PRG
TUNE
TRACK
Car Audio
BAND/DISC UP
VOL
MUTE
(ATT)
[PWR]
(Power)
(➡ page 6)
[MODE]
(Mode (source))
(➡ pages 8, 10)
[BAND]
(Band) (Pause)
(➡ page 8, 11)
q
w
e
Only for CQ-C1110W
Note: CQ-C1100W has no remote control function.
20 21
CQ-C1110W/C1100WCQ-C1110W/C1100W
17
E
N
G
L
I
S
H
18
E
N
G
L
I
S
H
Troubleshooting
If you suspect something wrong
Immediately switch the power off.
Disconnect the power connector and check that there is neither
smoke nor heat from the unit before asking for repairs. Never
try to repair the unit by yourself because it is dangerous to do
so.
Caution:
• Do not use the unit if it malfunctions or if
there is something wrong.
• Do not use the unit in irregular condition,
for example, without sound, or with
smoke or foul smell, which can cause
ignition or electric shock. Immediately
stop using it and call the store where you
purchased it.
Troubleshooting tips
The speaker wiring is confused between right and left.
➡
Perform the speaker wiring in accordance with the wiring diagram.
The speaker channels
are reversed between
right and left.
BAL/FAd setting is not appropriate.
➡
Readjust BAL/FAd.
There is a break, a short circuit, poor contact or wrong wiring regarding the
speaker wiring.
➡
Check the speaker wiring.
No sound from speak-
er(s)
Some operations are not executable in particular modes such as menu mode.
➡
Read the operating instructions carefully and cancel the mode. In case the
unit is still out of order, consult your dealer.
Some operations are
not executable.
Alternator noise comes from the car.
➡
Change the wiring position of the ground lead.
➡
Mount a noise filter on the power supply.
Noise is made in step
with engine revolu-
tions.
There is an electromagnetic-wave generator such as a cellular phone near the
unit or its electrical lines.
➡
Keep an electromagnetic-wave generator such as a cellular phone away
from the unit and the wiring of the unit. In case that noise cannot be elimi-
nated due to the wiring harness of the car, consult your dealer.
The contact of the ground lead is poor.
➡
Make sure that the ground lead is connected to an unpainted part of the
chassis securely.
Noise
MUTE is set to ON.
➡
Set MUTE to OFF.
The wiring of the speaker lines are not correct, or a break or poor contact arises.
➡
Check the wiring in accordance with the wiring diagram.
Sound is not
generated.
The power cord (battery, ACC and ground) is connected in the wrong way.
➡
Check the wiring.
Fuse blowout
➡
Eliminate the cause of fuse blowout and replace the fuse with new one.
Consult your dealer.
❐ Common
Problem
Possible cause
➡
Possible solution
The sound field is not
clear in the stereo
mode. Central sound
is not settled.
The plus and minus terminals at right and left channels of speakers are connect-
ed reversely.
➡
Perform the speaker wiring in accordance with the wiring diagram.
❐ Radio
The contact of the battery lead is poor, or the battery lead is not always
powered.
➡
Make sure that the battery lead is connected securely, and preset
stations again.
Preset stations cannot
be stored.
The number of receivable stations is less than 6.
➡
Move to an area where receivable stations number is maximum,
and try presetting.
The number of auto
preset stations is less
than 6.
Antenna installation or wiring of antenna cable is faulty.
➡
Check whether the antenna mounting position and its wiring are cor-
rect. In addition, check to see whether the antenna ground is
securely connected to the chassis.
No power is supplied to the antenna amplifier (when using a film anten-
na, etc.).
➡
Check the wiring of the antenna battery lead.
Poor reception or
noise
Problem
Possible cause
➡
Possible solution
❐ CD
Disc unejectable
The unit is not sufficiently secured.
➡
Secure the unit to the console box with the rear support strap, etc.
The unit is tilted at over 30˚ in the front-to-end direction.
➡
Make the angle 30˚ or less.
Sound skipping due to
vibration
There is a flaw or foreign material on the disc.
➡
Remove the foreign material, or use a flawless disc.
Sound skipping or
noise
The disc is inserted upside down.
➡
Insert a disc correctly.
There is a flaw or foreign material on the disc.
➡
Remove the foreign material, or use a flawless disc.
No playback or disc
ejected
A label is peeled off from the CD in the unit.
➡
Refer repair to the dealer where you purchased the unit.
The microcontroller in the unit operates abnormally due to noise or other
factors.
➡
Press the reset switch. If there is no reset switch, unplug the
power cord and plug it again. In case the unit is still out of order,
consult the dealer.
Problem
Possible cause
➡
Possible solution
The CD-R/RWs that are
playable on other
devices are not
playable on this unit.
The playability of some CD-R/RWs may depend on the combination of
media, recording software and recorder to be used even if these CD-
R/RWs are playable on other devices such as a PC.
➡
Make CD-R/RWs in a different combination of media, recording
software and recorder after referring to the description about CD-
Rs/RWs (
➡
page 24).
No power to the unit
22 23
CQ-C1110W/C1100WCQ-C1110W/C1100W
19
E
N
G
L
I
S
H
20
E
N
G
L
I
S
H
Troubleshooting
(Continued)
Error display messages
❐ CD
Product servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest
authorized Panasonic Service center. The product should be serviced only by a qualified technician.
❐ CD (Continued)
Condensation (dew).
➡Wait for a while before use.
The disc has no error
but no playback is
made or the disc is
ejected automatically.
The first track of a mix mode disc was reproduced. (Mix mode is a
format in which data except music is recorded on the first track and
music data is recorded on other than the first track in a session.)
➡Play back music data recorded on other than the first track.
Time is counted but no
sound comes out.
Problem
Possible cause
➡
Possible solution
Trouble
Buttons are invalid for
operation.
Battery polarities are reversed.
➡Insert the battery correctly.
Wrong battery.
➡Check the battery.
Battery has run down.
➡Replace the battery.
Remote control unit is in the wrong direction.
➡Direct the remote control unit at sensor on the front panel.
Possible cause
➡
Possible solution
❐ Remote control unit
Only for CQ-C1110W
Display
Possible cause
➡
Possible solution
Disc is dirty, or is upside down.
Disc has scratches.
No operation by some cause.
¡Check the disc.
¡Load the disc again.
After 5 seconds
No disc is in the CD player.
➡ Insert disc into the CD player.
The disc is ejected automatically.
The sensor is exposed to direct sunlight. (The remote control may
not be operable when the sensor is exposed to direct sunlight. In
such a case, the system is not faulty.)
➡Block off sunlight to the sensor.
24 25
CQ-C1110W/C1100WCQ-C1110W/C1100W
21
E
N
G
L
I
S
H
22
E
N
G
L
I
S
H
❐ Cleaning this unit
Use a dry, soft cloth to wipe.
❐ Caution on cleaning
Never use solvents such as benzine, thinner as
they may mar the surface of the unit.
Label side
<Correct> <Wrong>
Do not use irregular shaped discs.
How to hold the disc
• Do not touch the underside of the disc.
• Do not scratch the discs.
•Do not bend disc.
• When not in use, keep the disc in the case.
Do not use irregular shaped discs.
Do not leave discs on the following places:
• Direct sunlight
• Near car heaters
• Dirty, dusty and damp areas
• Seats and dashboards
Disc cleaning
Use a dry, soft cloth to wipe from the center outward.
Do not attach any seals or labels to your discs.
Do not write on the disc label in a heavy pen or ballpoint
pen stroke.
Notes on Discs
Do not play any ordinary music CDs with labels other than
this one.
Care of the Unit
Maintenance
Notes on CD-Rs/RWs
•You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives),
either due to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.
• CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving
them inside a car for extended periods may damage them and make playback impossible.
• The unit may not successfully play back a CD-R/RW that was made by the combination of writing software, a
CD recorder (CD-R/RW drive) and a disc if they are incompatible one another.
• This player cannot play the CD-R/RW discs if the session is not closed.
• This player cannot play the CD-R/RW discs which contains other than CD-DA data.
• Be sure to observe the instructions of CD-R/RW disc for handling it.
❐ General
Power supply: 12 V DC (11 – 16 V), test voltage 14.4 V, negative ground
Current consumption: Less than 2.2 A (CD play mode; 0.5 W × 4 channels)
Maximum power output: 45 W × 4 channels (at 4 Ω)
Tone adjustment range:
Bass: ±12 dB at 100 Hz
Treble: ±12 dB at 10 kHz
Suitable speaker impedance: 4 – 8 Ω
Preamp output voltage: 2.5 V (CD play mode; 1 kHz, 0 dB)
Output impedance: 200 Ω
Dimensions (W × H × D): 178 × 50 × 155 mm
Weight: 1.4 kg
❐ FM stereo radio
Frequency range: 87.5 – 108.0 MHz
Usable sensitivity: 11.0 dBf. (1.25 µV, 75 Ω)
50 dB quieting sensitivity: 15.2 dBf. (1.6 µV, 75 Ω)
Frequency response: 30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity: 75 dB
Stereo separation: 42 dB (at 1 kHz)
Image response ratio: 75 dB
IF response ratio: 100 dB
Signal/noise ratio: 70 dB
❐ AM radio
Frequency range: 531 – 1 602 kHz
Usable sensitivity: 28 dBµV (25 µV, S/N 20 dB)
❐ CD player
Sampling frequency: 8 times oversampling
Error correction system: Panasonic super decoding algorithm
Pick-up type: Astigma 3-beam
Light source: Semiconductor laser
Wave length: 780 nm
Frequency response: 20 Hz – 20 kHz (±1 dB)
Signal/noise ratio: 96 dB
Total harmonic distortion: 0.01 % (at 1 kHz)
Wow and flutter: Below measurable limits
Channel separation: 75 dB
Note: Specifications and the design are subject to modification without notice due to improvements in technology.
Specifications
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Panasonic CQ-C1110W Manuale utente
- Categoria
- Ricevitori multimediali per auto
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: Panasonic CQ-C1110W User manual
Documenti correlati
-
Panasonic CQDP153WA Istruzioni per l'uso
-
-
-
-
-
-
-
Panasonic CQRDP75OL Istruzioni per l'uso
-
-