Fujifilm H MOUNT ADAPTER G Manuale del proprietario

MOUNT ADAPTER

H MOUNT ADAPTER G

OWNER'S MANUAL

BL00004887-100

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

РУССКИЙ

中文简

JA-1

JA-2

JA-3

http://fujifilm.jp/support/digitalcamera/download/

•

JA-4

A F

B G

C H

D I

E

JA-5

A

B

Q

A

B

JA-6

A

B

Q

A

B

JA-7

1

2

A

B

C

3

A

B

C

D

JA-8

4

5

Q

R

2

JA-9

R

6.

Q

84.6 mm 40.5 mm

210 g

EN-1

ENGLISH

For Your Safety

Be sure to read these notes

before use

Safety Notes

Thank you for your purchase of this product.

For repair, inspection, and internal testing,

contact your FUJIFILM dealer.

• Make sure that you use the lens correctly.

Read these safety notes and the camera

Owner’s Manual carefully before use.

• After reading these safety notes, store them

in a safe place.

About the Icons

The icons shown below are used in this docu-

ment to indicate the severity of the injury or

damage that can result if the information indi-

cated by the icon is ignored and the product is

used incorrectly as a result.

WARNING

This icon indicates that

death or serious injury can

result if the information is

ignored.

CAUTION

This icon indicates that

personal injury or material

damage can result if the

information is ignored.

The icons shown below are used to indicate

the nature of the instructions which are to be

observed.

Triangular icons tell you that this

information requires attention (“Im-

portant”).

Circular icons with a diagonal bar tell

you that the action indicated is pro-

hibited (“Prohibited”).

Filled circles with an exclamation

mark indicate an action that must be

performed (“Required”).

WARNING

Do not

use in the

bathroom

or shower

Do not immerse in or expose to water.

Failure to observe this precaution

can cause a ﬁ re or electric shock.

WARNING

Do not

disas-

semble

Do not disassemble (do not open the

case).

case). Failure to observe this precau-

tion can cause ﬁ re, electric shock, or

injury due to product malfunction.

Do not

touch

internal

parts

Should the case break open as the result

of a fall or other accident, do not touch

the exposed parts.

the exposed parts. Failure to observe

this precaution could result in elec-

tric shock or in injury from touching

the damaged parts. Remove the

camera battery immediately, taking

care to avoid injury or electric shock,

and take the product to the point of

purchase for consultation.

Do not place on unstable surfaces.

Do not place on unstable surfaces. The

product may fall, causing injury.

Do not view the sun through the lens

or camera view nders.

or camera view nders. Failure to

observe this precaution can cause

permanent visual impairment.

EN-2

ENGLISH

CAUTION

Do not use or store in locations that are

exposed to steam, or smoke or are very

humid or extremely dusty.

humid or extremely dusty. Failure to

observe this precaution can cause

ﬁ re or electric shock.

Do not leave in direct sunlight or in

locations subject to very high tempera-

tures, such as in a closed vehicle on a

sunny day.

sunny day. Failure to observe this

precaution can cause ﬁ re.

Keep out of the reach of small children.

This product could cause injury in

the hands of a child.

Do not handle with wet hands.

Do not handle with wet hands. Failure

to observe this precaution can cause

electric shock.

Keep the sun out of the frame when

shooting backlit subjects.

shooting backlit subjects. Sunlight fo-

cused into the camera when the sun

is in or close to the frame can cause

ﬁ r e o r b u r n s .

When the product is not in use, replace

the lens caps and store out of direct sun-

light.

light. Sunlight focused by the lens

can cause ﬁ re or burns.

CAUTION

Do not carry the camera or lens while

they are attached to a tripod.

they are attached to a tripod. The

product can fall or strike other ob-

jects, causing injury.

For Customers in the U. S. A.

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

FCC Statement: This device complies with Part

15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may

not cause harmful interference, and (2) this

device must accept any interference received,

including interference that may cause unde-

sired operation.

CAUTION: This equipment has been tested and

found to comply with the limits for a Class B digi-

tal device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation. This equipment generates,

uses, and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment oﬀ and on, the user is encour-

aged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equip-

ment and receiver.

• Connect the equipment into an outlet on a

circuit diﬀ erent from that to which the re-

ceiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

• You are cautioned that any changes or

modiﬁ cations not expressly approved in this

manual could void the user’s authority to

operate the equipment.

Notes on the Grant: To comply with Part 15 of

the FCC Rules, this product must be used with

a Fujiﬁ lm-speciﬁ ed ferrite-core A/V cable, USB

cable, and DC supply cord.

EN-3

ENGLISH

For Customers in Canada

CAN ICES-3 (B)/NMB-3(B)

CAUTION: This Class B digital apparatus com-

plies with Canadian ICES-003.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water (ex-

cluding waterproof products).

• Clean only with a dry cloth.

• Do not block any ventilation openings. In-

stall in accordance with the manufacturer’s

instructions.

• Do not install near any heat sources such as

radiators, heat registers, stoves, or other appa-

ratus (including ampliﬁ ers) that produce heat.

• Protect the power cord from being walked

on or pinched particularly at plugs, conve-

nience receptacles, and the point where

they exit from the apparatus.

• Only use attachments/accessories speciﬁ ed

by the manufacturer.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualiﬁ ed service per-

sonal. Servicing is required when the ap-

paratus has been damaged in any way, such

as power supply cord or plug is damaged,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not oper-

ate normally, or has been dropped.

Disposal of Electrical and Electronic Equipment in

Private Households

In the European Union, Norway, Ice-

land and Liechtenstein: This symbol

on the product, or in the manual

and in the warranty, and/or on its

packaging indicates that this product shall

not be treated as household waste. Instead

it should be taken to an applicable collection

point for the recycling of electrical and elec-

tronic equipment.

By ensuring this product is disposed of cor-

rectly, you will help prevent potential negative

consequences to the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product.

The recycling of materials will help to con-

serve natural resources. For more detailed in-

formation about recycling this product, please

contact your local city oﬃ ce, your household

waste disposal service or the shop where you

purchased the product.

In Countries Outside the European Union, Norway,

Iceland and Liechtenstein: If you wish to discard

this product, including the batteries or accu-

mulators, please contact your local authorities

and ask for the correct way of disposal.

Australian RCM

EN-4

ENGLISH

Before Using This Product

Some features are not available with older

 rmware. Be sure to update the  rmware to

the latest version. Instructions on viewing the

 rmware version and updating  rmware are

available from the following website:

http:/ /www.fujifilm.com/support/digital_cameras/

software/#firmware

If you do not have access to a computer, sup-

port is available from the local distributor

listed in the “FUJIFILM Worldwide Network”

material provided with your camera.

Supplied Accessories

• Tripod collar

• Front cap

• Rear cap

EN-5

ENGLISH

Parts of the Adapter

A

Orientation marks

B

Camera mounting mark

C

Lens mounting mark

D

Lens signal contacts

E

Function button

F

Camera signal contacts

G

Adapter lens release

H

Front cap

I

Rear cap

Removing the Caps

Remove the caps as shown.

EN-6

ENGLISH

Attaching the Adapter

Turn the camera o . Keeping the marks on the

adapter and camera aligned (

A

), place the

adapter on the camera lens mount and rotate

it until it clicks into place (

B

).

Removing the Adapter

After turning the camera o , press the lens re-

lease button on the camera (

A

) and rotate the

adapter as shown (

B

).

EN-7

ENGLISH

Attaching Lenses

Turn the camera o . Keeping the marks on the

lens and adapter aligned (

A

), place the lens

on the adapter and rotate it until it clicks into

place (

B

).

Removing Lenses

Turn the camera o . Keeping the adapter lens

release in the position shown (

A

), rotate the

lens in the direction shown by the arrow (

B

).

Adapter lens release

EN-8

ENGLISH

Attaching a Tripod

A tripod can be used to support the lens.

1

Attach the tripod collar to the tripod.

2

Align the marks on the lock knob and collar

(

A

), then pull (

B

) and lift (

C

) the knob to

open the collar as shown.

Lock knob

3

Position the collar in the channel on the

mount adapter (

A

) and lower the hinged

portion (

B

). Check that the marks on the

knob and collar are aligned (

C

) and click

the collar closed (

D

).

Channel

EN-9

ENGLISH

4

Rotate the collar to align the orientation

mark on the collar with either of the marks

(landscape or portrait) on the adapter.

Landscape orientation

Portrait orientation

5

Tighten the lock knob to secure the collar.

Q

Be careful not to pinch your  ngers when at-

taching the collar. Failure to observe this pre-

caution could result in injury.

Q

When attaching the collar, keep a  rm grip on

the camera to prevent it falling.

R

The collar can be opened for removal as

shown in Step 2.

EN-10

ENGLISH

Using the Adapter

Pressing the mount adapter function button displays the

MOUNT ADAPTER SETTING menu in the camera monitor. Ad-

just settings as required.

R

If the lens has an internal shutter, use MOUNT ADAPTER

SETTING> SHUTTER SELECT to choose between the cam-

era (BODY) and lens (LENS) shutters.

R

For more information on mount adapter settings, see

“MOUNT ADAPTER SETTING” in Chapter 6 (“The Shooting

Menus”) of the camera manual.

Q

Some features may be unavailable when a mount adapter is

attached, while the availability of others may vary with the

lens used.

Speci cations

Dimensions

Dimensions ⌀86.4× 40.5mm (excluding projections)

Weight

Weight Approx. 210g (excluding caps)

La pagina sta caricando ...

Fujifilm H MOUNT ADAPTER G Manuale del proprietario

Fujifilm H MOUNT ADAPTER G Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti