Panasonic SCPM71SD Istruzioni per l'uso

Categoria
Lettore CD
Tipo
Istruzioni per l'uso
RQT8312-1B
E EB
Operating Instructions
SD Stereo System
Model No. SC-PM71SD
Dear customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read
the instructions completely.
Please keep this manual for future reference.
n High speed recording - Performance and
convenience!
page 24
n
More fun with SD — Connect and expand!
page 36
n
Never forget a recording again with the
“Record timer”.
page 33
n
Save your favorite tracks from an external
source to SD!
page 35
If the display lights up when the unit is turned off,
turn the demo function off. page 10
Operations in these instructions are described mainly for the
remote control, but you can do the operations on the main
unit if the controls are the same.
Note
“EB” on the packaging indicates the United Kingdom.
As an ENERGY STAR
®
Participant, Panasonic has
determined that this product
meets the ENERGY STAR
®
guidelines for energy
efficiency.
If you have any questions, contact : 1-800-561-5505
Only for Canada
For SC-PM7190
2
RQT8312
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (As of February 2005)
Note
The included AC mains lead is for use with this unit only. Do not use it
with other equipment.
Do not use an AC mains lead from other equipment.
(Inside of product)
(Produktets innside)
(Tuotteen sisällä)
THE FOLLOWING APPLIES ONLY IN CANADA
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
User memo:
System SC-PM71SD
Main unit SA-PM71SD
Speakers SB-PM71
Accessories
1 Remote control
(N2QAJB000130)
1 FM indoor antenna
(RSA0007-L)
2 Batteries
1 AC power supply cord for remote control
(K2CB2CB00006)
1 AM loop antenna
(N1DAAAA00001)
1 AC mains lead
1 CD-ROM
(RJA0053-3X)
1 Antenna plug adaptor
(K2CR2DA00004) (K1YZ02000013)
(K2CJ2DA00010)
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
The socket outlet shall be installed near the equipment and
easily accessible or the mains plug or an appliance coupler
shall remain readily operable.
For Canada
fExcept or Canada
For the United Kingdom
For the United Kingdom
For Continental Europe
For Australia and N.Z.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION VENTS.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
DATE OF PURCHASE _____________________
DEALER NAME __________________________
DEALER ADDRESS ______________________
_______________________________________
TELEPHONE NUMBER____________________
The model number and serial number of this product can be
found on either the back or the bottom of the unit. Please note
them in the space provided below and keep for future
reference.
MODEL NUMBER SC-PM71SD
SERIAL NUMBER
For Canada
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Getting started
RQT8052
3
Table of contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Listening caution (For Canada) . . . . . . . . . . . . . . . . 4
Caution for AC Mains Lead . . . . . . . . . . . . . . . . . . . 4
IMPORTANT SAFETY INSTRUCTIONS
(For Canada) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Disc/Card information. . . . . . . . . . . . . . . . . . . . . . . . 6
Inserting/Removing the discs and cards . . . . . . . . 8
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Positioning the speakers. . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Playing SD cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Other ways of playing discs/cards. . . . . . . . . . . . . . . . . . 16
Selecting a track. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Selecting an album. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Title search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Program play (up to 24 items) . . . . . . . . . . . . . . . . . . . 17
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Playing HighMAT discs. . . . . . . . . . . . . . . . . . . . . . . . . 18
Cassette tapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sound field and sound quality. . . . . . . . . . . . . . . . 20
H.BASS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Re-master — Enjoying more natural sound . . . . . . . . . . 20
SURROUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing sound field and quality . . . . . . . . . . . . . . . . . . 21
Muting the volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
The radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Approximate recording time on SD Memory Card . . . . . 23
High-speed recording . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Recording CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Recording to SD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5CD auto recording (CD è SD) . . . . . . . . . . . . . . . . . . . 25
Program recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Recording to cassette tape . . . . . . . . . . . . . . . . . . . . . . . 25
Recording from cassette tape/the radio to SD . . . 26
Recording from SD/the radio to cassette tape . . . 27
Editing SDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Erasing tracks — TRACK ERASE/ALL ERASE . . . . . . 28
Moving tracks — MOVE . . . . . . . . . . . . . . . . . . . . . . . . 28
Formatting a card — CARD FORMAT. . . . . . . . . . . . . . 29
Editing playlists — PLAYLIST . . . . . . . . . . . . . . . . . . . . 29
Entering titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Convenient functions . . . . . . . . . . . . . . . . . . . . . . . 32
Setting the time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Auto-off function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
The sleep timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
The play/record timer . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Displaying information . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Dimming the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using other equipment. . . . . . . . . . . . . . . . . . . . . . 34
Using an external unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Additional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Other antenna connections . . . . . . . . . . . . . . . . . . . . . . 34
Recording from an external unit . . . . . . . . . . . . . . . . . . . 35
Even more fun with SD. . . . . . . . . . . . . . . . . . . . . . 36
Listening on portable equipment . . . . . . . . . . . . . . . . . . 36
Using a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
SD-Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . 38
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
When moving the unit . . . . . . . . . . . . . . . . . . . . . . 39
Limited Warranty (Only for Canada) . . . . . . . . . . . 40
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Product Service (Only for Canada) . . . . . . . . . . . . 42
(Except for Canada) . . . . . . . . . . . . . . . . . . . . . . . . 42
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover
Getting started
Playing back
Recording
Know at a glance what kind of recording to do!!
Recording sources and media. . . . . . . . . . . . . . . 23
Editing
Convenient functions
Reference
Press and hold until “DEMO OFF” is
displayed.
Every time you press the button:
DEMO OFF DEMO ON
If the display lights up when the unit is turned
off, the demo function is set to on.
Getting started
RQT8052
4
Listening caution (For Canada)
Selecting fine audio equipment such as the unit you’ve just
purchased is only the start of your musical enjoyment. Now it’s
time to consider how you can maximize the fun and excitement
your equipment offers. This manufacturer and the Electronic
Industries Association’s Consumer Electronics Group want you
to get the most out of your equipment by playing it at a safe level.
One that lets the sound come through loud and clear without
annoying blaring or distortion-and, most importantly, without
affecting your sensitive hearing.
We recommend that you avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal”
can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably
and clearly, and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing
damage or loss in the future. After all, we want you listening for a
lifetime.
Caution for AC Mains Lead
Getting started
RQT8052
5
IMPORTANT SAFETY
INSTRUCTIONS (For Canada)
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable
safety instructions listed below. Keep these operating
instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Safety precautions
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions
can damage the cabinet and other components, thereby shortening the
unit’s service life.
Do not place heavy items on the unit.
Do not use high voltage power sources. This can overload the unit and
cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock. Do not
pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC mains
lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead and
contact your dealer or an authorized service center. Electric shock or
damage to the unit can occur if the unit is repaired, disassembled or
reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power source if
it is not to be used for a long time.
Placement
Voltag e
AC mains lead protection
Foreign matter
Service
Getting started
RQT8052
6
Disc/Card information
1
A process that allows play on compatible equipment.
It may not be possible to play the above discs in all cases due to the type of disc or condition of the recording.
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play may
not be possible.
You can use SD Memory Cards with the following capacities (from 8 MB
to 1 GB).
Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs
(This site is in English only.)
If the SD Memory Card is formatted on other equipment, the time spent
for recording may become longer. Also if the SD Memory Card is
formatted on a PC, you may not be able to use it on this unit.
In these cases, format the card on this unit.
This unit supports SD Memory Cards formatted in FAT12 system and
FAT16 system based on SD Memory Card Specifications.
The product numbers are correct as of February 2005.
This unit records data to SD card in SD Audio Format*. This format incor-
porates CPRM (Content Protection for Recordable Media) technology.
*This is an audio standard for SD Memory cards from the SD association.
n Regarding music protection
SD cards incorporate secure digital music initiative (SDMI) standard copy-
right protection technology. This uses encryption technology to protect
copyrights, to ensure the healthy development of music culture and to pro-
tect the rights of valid purchasers.
This unit records music data in encrypted form. Encrypted data cannot
be moved/copied to other equipment for use.
This unit cannot back up or restore music data recorded in encrypted
form.
Use Panasonic SD-Jukebox software (included) to move data contained
in the SD card.
You may not be able to use a SD card containing copy limitation
information.
n Limitations on digital recording
Digital recording from CD to SD is limited by SCMS (serial copy manage-
ment system). You can record digitally from CD to SD with little signal
degradation on this unit. However, you cannot record digitally from a CD
that is protected by SCMS.
Analogue recordings are not affected.
Discs and cards usable on this unit
Type Logo
Indication in
these operating
instructions
Remarks
CD
This unit can play CD-R/RW (audio recording disc) recorded with the formats on the
left. Close the session or finalize
1
the disc after recording.
HighMAT discs
WMA and MP3 files only.
CD-R
CD-RW
SD Memory
Card
Includes miniSD Cards. A miniSD adaptor needs to be inserted before using these
cards.
You cannot use multimedia cards.
We recommend using a Panasonic SD card. ( Suitable SD Memory Cards, below)
You can only play audio data (AAC/MP3/WMA) recorded in SD Audio Format.
AAC: Advanced Audio Coding
MP3: MPEG- 1 Audio Layer 3 / MPEG- 2 Audio Layer 3
WMA: Windows Media™ Audio
Suitable SD Memory Cards
8 MB, 16 MB, 32 MB, 64 MB
128 MB, 256 MB, 512 MB, 1 GB (Maximum)
1 GB : RP-SDK01GU1A
512 MB : RP-SDK512U1A
256 MB : RP-SDH256U1A
: RP-SD256BU1A
128 MB : RP-SD128BU1A
64 MB : RP-SD064BPPA
32 MB : RP-SD032BPPA
1 GB : RP-SDK01GE1A
512 MB : RP-SDK512E1A
256 MB : RP-SDH256E1A
: RP-SD256BE1A
128 MB : RP-SD128BE1A
64 MB : RP-SD064BE-A
32 MB : RP-SD032BE-A
1 GB : RP-SDK01GG1A
512 MB : RP-SDK512G1A
256 MB : RP-SDH256G1A
: RP-SD256BG1A
128 MB : RP-SD128BG1A
64 MB : RP-SD064BG-A
32 MB : RP-SD032BG-A
For Canada
For Europe
For Australia and N.Z.
Recording and editing
Keep the small memory cards such as the SD Memory
Card out of reach of children. If swallowed, seek medical
advice immediately.
This unit is not waterproof and should not be exposed to
excessive moisture.
Getting started
RQT8052
7
n How to hold a disc or
card
Do not touch the recorded
surface or the terminal
surface.
n If there is dirt or condensation
on the disc
Wipe with a damp cloth and then wipe dry.
n Handling precautions
Do not attach labels or stickers to discs. (This may cause disc warping
and un-balanced rotation, rendering it unusable.)
Do not write on the label side with a ball-point pen or other writing
instrument.
Do not use record cleaning sprays, benzine, thinner, static electricity
prevention liquids or any other solvent.
Do not use scratch-proof protectors or covers.
Do not expose the terminals of the card to water, garbage or other
strange things.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or labels (rented
discs, etc).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart
shapes.
Do not place in the following areas:
In direct sunlight.
In very dusty or humid areas.
Near a heater.
Where static electricity or electromagnetic waves occur.
n To protect your data
Switch the write-protect switch of the SD Memory
Card to “LOCK”. Unlock when you want to record or
edit the card again.
Performing the following actions during operation can
damage your SD Memory Card and corrupt the data
it contains.
Inserting or ejecting the SD Memory Card
Turning the unit off forcibly (for example, unplugging the AC mains
lead)
SD logo is a trademark.
Portions of this product are protected under copyright law and are
provided under license by ARIS/SOLANA/4C.
Microsoft, Microsoft logo, Windows, Windows
logo, Windows NT, Windows Media and
DirectX are either trademarks, or registered
trademarks of Microsoft Corporation in the
United States and other countries.
WMA is a compression format developed by
Microsoft Corporation. It achieves the same
sound quality as MP3 with a file size that is
smaller than that of MP3.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS
and Thomson multimedia.
Licensed AAC Patents (U.S. patent numbers);
Disc and card handling
a
08/937,950 5,394,473 5,579,430 5,481,614 5,299,238 5,581,654
5848391 5,583,962 08/678,666 5,592,584 5,299,239 05-183,988
5,291,557 5,274,740 98/03037 5,781,888 5,299,240 5,548,574
5,451,954 5,633,981 97/02875 08/039,478 5,197,087 08/506,729
5 400 433 5 297 236 97/02874 08/211,547 5,490,170 08/576,495
5,222,189 4,914,701 98/03036 5,703,999 5,264,846 5,717,821
5,357,594 5,235,671 5,227,788 08/557,046 5,268,685 08/392,756
5 752 225 07/640,550 5,285,498 08/894,844 5,375,189
?
TM
Windows
Media
TM
Tips for making WMA/MP3 discs
Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
If you have recorded MP3/WMA on the same disc as CD-DA, only
the format recorded in the first session can be played.
This unit is compatible with multi-session but if there are a lot of
sessions it takes more time for play to start. Keep the number of
sessions to a minimum to avoid this.
If there is a large amount of JPEG data etc. within a WMA/MP3 file,
sound may not be output and play may not be possible.
The unit can play a maximum of 400 albums and 999 tracks. If there
are multiple folders with many levels, there may be files and folders
that cannot be recognized.
This unit is compatible with Windows Media Audio 9 (WMA9),
however not compatible with WMA9 Professional/Lossless/Voice
and MBR*.
*Multiple Bit Rate: A file that contains the same content encoded at
several different bit rates.
Noise may occur when playing WMA files.
You cannot play WMA files that are copy protected.
This unit is not compatible with ID3 tags.
This unit is not compatible with packet-write format.
If you play an MP3 track that includes still picture data, it will take
some time before the music itself starts playing and the elapsed time
will not be displayed during this time. Even after the track starts, the
correct play time will not be displayed.
Naming folders and files
At the time of recording, prefix folder and
file names with 3-digit numbers in the
order you want to play them (this may not
work at times).
Files must have the extension:
“.WMA” or “.wma”
“.MP3” or “.mp3”
Example:
root
001 group
003 group
002 group
001 track.mp3
002 track.mp3
003 track.mp3
004 track.mp3
001 track.mp3
002 track.mp3
003 track.mp3
001 track.mp3
002 track.mp3
003 track.mp3
Getting started
RQT8052
8
Inserting/Removing the discs and cards
Adhere to the following to avoid problems.
Place the disc label up in the center of the tray.
Insert only one disc into each tray.
You can use SD cards with capacities between 8MB and 1GB on this
unit. ( page 6)
Do not open the card lid during play as play stops.
Do not open the lid while recording/editing. This may cause recording/
editing to stop or the data may not be correctly recorded/edited on the
SD card.
Do not open the lid or remove the SD card when “CARD Writing” is
displayed or the SD card indicator is flashing. The SD card may become
unusable.
Note
If you accidentally open the cover when recording from a CD, reinsert
the SD card and check your recording. If there is a problem, delete what
was recorded, then do the recording again.
You cannot use high-speed recording to record the same CD for a
second time within 74 minutes of finishing the first high-speed recording.
(You can record at normal speed.)
If you accidentally open the cover when recording from the radio,
recording stops.
If you accidentally open the cover when editing an SD card, reinsert the
card and check what you have edited. If there is a problem, delete what
was edited, then do the editing again.
Inserting discs
1 Open/close the CD
lid only with
[OPEN/CLOSE ;].
Do not pull.
Do not push.
XXX
X
XX
XX
X X
X
XXXX
X
XX
X
X
X
X
XX
XXX
XXX
X
X
X
XXX
X
X
XXX
X
X
X
XX
X
XXX
X
XXX
X
X
X
XX
XXX
XXXX
X
X
X
X
X
X
XXX
X
X
X
X
X
XX
X
X
X
X
X
X
X
X
X
X
X
XX
X
X
X
XX
XXXX
XX
XX
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XX
X
X
XX
X
X
X
X
X
X
X
X
X
X
X
X
XX
X
X
X
X
X
X
X
X
X
X
X
X
X
2 Insert to fit in the tray
guide.
12 cm 8 cm
Inserting a card
Removing the card
1 Open the lid.
LOCK
ADAPTER
2 Insert the SD card.
When using a miniSD card
A miniSD adapter is necessary.
miniSD adapter
miniSD card
Press on the center of the
card until it clicks into
place.
Insert label up with cut-off
corner on the right.
3
Close the lid securely.
The SD card indicator lights on.
You cannot play, record, or edit the SD
card when the lid is open.
SD card indicator
1 Open the lid.
2 Press on the center of
the SD card.
3 Pull straight out.
4 Close the lid securely.
Getting started
RQT8052
9
Setup
n Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store the batteries in a cool, dark place.
n Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
(23 feet) directly in front of the unit.
Place so that the Panasonic logos and super tweeters are on the outside.
n Use only the supplied speakers
Using other speakers can damage the unit and sound quality will be
negatively affected.
Set the speakers up on an even surface to prevent them from falling.
Take proper precautions to prevent the speakers from falling if you
cannot set them up on an even surface.
n Positioning for best effect
How you set up your speakers can affect the bass and the sound field.
Note the following points.
Place speakers on flat secure bases.
Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtain.
Keep your speakers at least 10 mm (
13
/
32
") away from the system for
proper ventilation.
To avoid damage to the speakers, do not touch the speaker cones if you
have taken the nets off.
n Notes on speaker use
These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily influenced
by magnetism.
You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
Reduce the volume in the following cases to avoid damage.
When playing distorted sound.
When the speakers emit strange noise (howling) from a record player,
noise from FM broadcasts, or continuous signals from an oscillator,
test disc, or electronic instrument.
When adjusting the sound quality.
When turning the unit on or off.
The remote control
R6/LR6, AA
Insert so the poles (+ and –)
match those in the remote
control.
Do not use rechargeable
type batteries.
Positioning the speakers
Caution
Use the speakers only with the
recommended system. Failure to do
so can damage the amplifier and
speakers, and can cause fire.
Consult a qualified service person if
damage occurs or if a sudden
change in performance is apparent.
Do not attach these speakers to walls
or ceilings.
Speaker Main unit Speaker
Panasonic logo Super tweeter
Getting started
RQT8052
10
Setup
Connections
Conserving power
The unit consumes power ( approx. 0.3 W, or approx. 0.5 W ) even when it is turned off. To save
power when the unit is not to be used for a long time, unplug it from the household AC mains socket. You will need to reset some
memory items after plugging in the unit again.
For Canada fExcept or Canada
Keep loose antenna cord away
from other wires and cords.
Video cassette recorder
Television
To AUX terminals
( page 34)
DEMO function
AM loop antenna
Stand the antenna
up on its base.
Press and hold until “DEMO OFF”
is displayed.
Every time you press the button:
DEMO OFF DEMO ON
If the display lights up when the
unit is turned off, the demo
function is set to on.
Getting started
RQT8052
11
Fix the other end of the
antenna where recep-
tion is best.
Adhesive tape
AC mains lead
To household AC outlet
To household mains socket
For Canada
fExcept or Canada
FM indoor antenna
Connect the AC mains lead after all other
connections are complete.
Speakers
Note
You can reduce the power consumed in
standby mode by turning the demo function
off.
If you set the clock ( page 32), the demo
function will turn off automatically.
When disconnecting the AC mains lead
1 Press [POWER 8]
or
[8] .
2 Disconnect after “GOODBYE”
disappears from the display.
For Canada
fExcept or Canada
Note
Never short-circuit positive (+) and negative (–) speaker wires.
Incorrect connection can damage the speakers.
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 4 BEFORE CONNECTION.
Insertion of Connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of the
connector may jut out as shown in the drawing.
However there is no problem using the unit.
For the United Kingdom
Only for Europe
Connector
Appliance inlet
Approx. 3.5 mm
If the speaker cords have vinyl tips, twist
the vinyl tip and pull off.
Confirm the colors of the tags on the
ends of the cords.
For White tags, connect to grey terminals.
For Blue, Black and Red tags, connect so tag colors match the
terminal colors.
White
Blue
Red
Black
Getting started
Grey
Blue
Black
Red
HIGH
(For high frequency)
LOW
(For low frequency)
White
Blue
Black
Red
RQT8052
12
Control guide
The illustration of the main unit which has been used for these instructions is for Canada.
The following screen is for explanation purposes.
Main unit
Display
Cassette lid
( page 19)
OPEN ; ( page 19)
Press to open the
cassette lid.
PHONES (Headphone jack)
Reduce the volume level and connect the headphones.
Headphones plug type: 3.5mm (1/8”) stereo.
Avoid listening for prolonged periods of time to prevent
hearing damage.
POWER 8 (standby/on switch)
Standby/on switch (8)
Press to switch the unit from on to
standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount of power.
AC supply indicator (AC IN)
This indicator lights when the unit is
connected to the AC mains supply.
Only for Canada
fExcept or Canada
SD card slot ( page 8)
1 q – 5 q (disc direct play buttons)
( page 14)
q TAPE ( page 19)
q/h SD ( page 15)
q/h CD ( page 14)
REC MODE ( page 24)
*/h SD ( page 24)
* CD
q SD HI-SPEED AUTO REC
( page 25)
LIST/ENTER ( page 16)
Display ( below)
SD card indicator ( page 8)
H.BASS indicator ( page 20)
H.BASS ( page 20)
STOP g ( page 15),
–DEMO ( page 10)
VOLUME UP/DOWN ( page 15)
CD CHECK ( page 15)
CHANGE ; ( page 15)
CD lid ( page 8)
Remote control sensor
LIST SELECT e, r ( page 16)
RETURN ( page 16)
TUNER/AUX ( page 22)
OPEN/CLOSE ; ( page 8)
Indicates the selected disc tray.
Cassette tape
Cassette tape
indicator
Play/Record Timer
SD recording mode
Recording
Sleep timer
n Regarding the screen saver
(prevents screen burning)
If you do not set the auto-off function
( page 32), the screen saver appears
on the display when the unit is left
unused for 10 minutes. Press any
button to clear the screen saver.
The screen saver does not work when
the auto-off function is set.
Getting started
RQT8052
13
Remote control
CLOCK/ ( page 32)
TIMER ( page 33)
z PLAY/REC ( page 33)
DISPLAY ( page 15, 33)
–DIMMER ( page 33)
Numbered buttons ( page 16)
u 2/REW, i 1/FF
( page 15)
TUNER/AUX ( page 22, 35)
RETURN ( page 16)
SURROUND ( page 21)
SOUND ( page 21)
REC MODE ( page 24)
TAPE ( page 25)
To record to cassette tapes
PLAY MODE ( page 15)
–REPEAT ( page 17)
e, r
LIST/ENTER ( page 16)
VOL, + ( page 15)
SLEEP ( page 32)
–AUTO OFF ( page 32)
^ ( page 33)
PROGRAM ( page 17)
DISC ( page 15)
TITLE IN ( page 31)
CHARA ( page 30)
EDIT MODE ( page 26, 28)
DEL ( page 30)
, ALBUM/GROUP
( page 16, 18)
q TAPE ( page 19)
q/h SD ( page 15)
q/h CD ( page 15)
g STOP ( page 15)
MUTING ( page 21)
H.BASS ( page 20)
RE-MASTER ( page 20)
*/h REC ( page 24)
SD, –HI-SPEED CD
q SD
( page 24)
To record to SD cards
Getting started
RQT8052
14
Basic play
1 Select a disc tray.
The unit turns on automatically.
When a CD is already loaded, the unit comes on automatically and starts play (One
touch play).
2 Open the CD lid.
3 Insert disc. ( page 8)
4 Close the CD lid.
5 Start play.
It may take some time for play to start but this is normal.
Playing discs
1
Label must face
upward.
Tray number
Disc tray
q/h SD
q/h CD
VOLUME UP/DOWN
CD CHECK
1 q – 5 q
CD lid
STOP g
LIST SELECT e, r
OPEN/CLOSE ;
CHANGE ;
Playing back
RQT8052
15
This unit can only play music data (AAC/MP3/WMA) recorded in the SD
standard audio format. Other SD audio formats cannot be played.
1 Insert the SD card. ( page 8)
2 Start play.
When a SD card is already loaded, the unit comes on automatically and
starts play (One touch play).
Note
Do not open the card lid during play as play stops.
You can use SD cards with capacities between 8MB and 1GB on this
unit. ( page 6)
Playback quality depends on the recording mode (XP/SP/LP) selected.
( page 23)
Selecting a
disc
All disc play
(during stop)
Select “ALL DISC”.
Changing a
disc in the
desired tray
Checking
the disc
location
Remote control Main unit
Within 10 seconds
Press [CHANGE ;] again to close the tray.
You can also remove a disc while another is playing.
Within 10 seconds
This feature lets you check whether a disc is in a
tray.
If a disc is being played, the corresponding tray will
not open.
Do not remove or insert discs during a disc check.
Do not push or pull out the trays during a disc
check.
Tray number
Press again to close the tray.
Playing SD cards
Volum e
adjustment
Stop
Pause
Remote control Main unit
Remote control Main unit
Press again to restart play.
Remote control
Main unit
Skip
Search
(during play
or pause)
Status
display
Remote control Main unit
You cannot search through
a disc with WMA/MP3 files.
Remote control
Press and hold.
The display changes each
time you press the button.
Remote control
Playing back
RQT8052
16
Basic play
Preparation
Press [q/h CD] or [q/h SD] and then [g STOP].
Press the numbered button(s) to select and play the
track.
Example
To select 12: [ 10] è [1] è [2]
To select 123: [ 10] è [10] è [1] è [2] è [3]
Note
You cannot use this feature with program play and random play.
1 During stop
Press [PLAY MODE, –REPEAT] to select
“1 ALBUM”.
2 Press [ , ALBUM/GROUP] to select the album.
3 Press [q/h CD].
To skip an album
Press [ , ALBUM/GROUP].
1 During stop
Press [LIST/ENTER].
2 Press [e] or [r] to select the title and press
[LIST/ENTER].
First select the disc, album or playlist title.
Select “Track List” to select a track from all the track titles on SD.
With HighMAT, press [e] or [r] to select the method of play. ( step 3,
page 18)
Main unit
1 Press [LIST/ENTER].
2 Turn [LIST SELECT
e, r] control to select the title and press
[LIST/ENTER].
To return to the previous display
Press [RETURN].
Note
Up to 32 characters per title can be shown by pressing [DISPLAY,
–DIMMER].
You cannot use this feature with program play, random play, and 1-
Album modes.
LIST/ENTER
LIST SELECT
e, r
STOP g
RETURN
q/h CD
q/h SD
Other ways of playing discs/cards
Selecting a track
Selecting an album
Title search
Playing back
RQT8052
17
1 During stop
Press [PROGRAM].
2 CD/WMA/MP3 only
Select a disc.
1 Press [DISC].
2 Within 10 seconds:
Press [1] - [5] to select the disc.
3 Press the numbered button(s) to select the track.
Example
To select 12: [ 10] è [1] è [2]
To select 123: [ 10] è [10] è [1] è [2] è [3]
Repeat steps 2 and 3 to program other tracks.
4 Press [q/h CD] or [q/h SD].
Program play will start.
When “PGM FULL appears
No further tracks can be programmed.
Note
Times are not displayed while programming (CD/WMA/MP3).
The program is not cleared even when you switch the unit to standby or
select another source.
The program is cleared when you remove the disc or the card.
You can search forward or backward only within the current track.
You cannot clear a specified track from the program.
1 During stop
Press [PLAY MODE, –REPEAT] to select the mode.
Every time you press the button:
2 Press [q/h CD] or [q/h SD].
Random play will start.
To ca ncel
While stopped, press [PLAY MODE, –REPEAT] to select “1 DISC”, “ALL
DISC”, “1 ALBUM”, or “PLAY MODE OFF”.
Note
You cannot skip to tracks which have been played.
You can search forward or backward only within the current track.
Repeat play according to the current play mode.
During play
Press and hold [PLAY MODE, –REPEAT] until
“REPEAT ON” is displayed.
“REP)” [“PGM)” in program play and “RND)” in random play] appears on
the display.
To ca ncel
Press and hold [PLAY MODE, –REPEAT] until “REPEAT OFF” is
displayed.
Repeat play is canceled when the unit stops play.
Note
Repeat play is not possible when playing HighMAT discs according to a
playlist order.
Program play (up to 24 items)
To Action
cancel program play Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Your program is retained in memory if the
system is unplugged.
replay your program Press [PROGRAM] then [q/h CD] or [q/h SD].
check program
contents
Press [u 2/REW] or [i 1/FF] when “PGM” is
displayed.
add to the program Repeat steps 2 and 3.
clear the program Press [g STOP] in the stop mode.
Random play
Repeat play
Playing back
RQT8052
18
Basic play
“HighMAT” appears to show that you can use these features.
Remote control
1 During stop
Press [LIST/ENTER].
The CD selection screen appears.
2 Press [e] or [r] to select the disc and press [LIST/ENTER].
3 Press [e] or [r] to select the method of play and press
[LIST/ENTER].
4 Press [e] or [r] to select the menu, playlist, or track and press
[LIST/ENTER].
Play starts when you select a playlist or track.
Main unit
1 Press [LIST/ENTER].
2 Turn [LIST SELECT
e, r] control to select the disc and press [LIST/ENTER].
3 Turn [LIST SELECT
e, r] control to select the method of play and press [LIST/ENTER].
4 Turn [LIST SELECT
e, r] control to select the menu, playlist, or track and press [LIST/
ENTER].
To return to the previous display
Press [RETURN].
To select a group
Press [ , ALBUM/GROUP] during play.
To cancel partway
Press [g STOP].
The original display appears.
Playing HighMAT discs
HighMAT Menu Find a playlist in the HighMAT menu
All Playlist Select and play playlists
WMA/MP3 Select and play WMA/MP3
STOP g
LIST/ENTER
LIST SELECT e, r
RETURN
Note
You cannot use this feature with program play,
random play, and 1-Album modes.
Playing back
RQT8052
19
Cassette tapes
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
1 Press to open and insert a cassette.
Make sure that the cassette is fully inserted and close the lid by
hand.
The cassette tape indicator lights on the display.
2 Start play.
To play the other side of the tape, turn the tape over and restart
play.
Volum e
adjustment
Stop
Fast-forward and
rewind
(during stop)
Finding the
beginning of a
track (TPS: Tape
Program Sensor)
(during play)
TPS finds the beginning of a track and resumes
play from there. Each press increases the number
of tracks skipped, up to a maximum of 9.
Side to be played back facing up.
Insert the cassette with the exposed tape facing you.
Remote control Main unit
Remote control Main unit
Remote control Main unit
Remote control Main unit
Playing back
q TAP E
LIST SELECT
e, r
OPEN ;
VOLUME
UP/DOWN
Cassette lid
STOP g
Use normal position tapes.
High position and metal position tapes can be played, but the unit is not
able to do full justice to the characteristics of these tapes.
Tapes exceeding 100 minutes are thin and can break or get caught in
the mechanism.
Tape slack can get caught up in the mechanism and should be wound
up before the tape is played.
Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
Cassette tape selection and care
RQT8052
20
Sound field and sound quality
You can enjoy more powerful bass on wide range speakers.
Press [H.BASS].
Every time you press the button:
H.BASS 1: Add powerful bass (factory preset)
H.BASS 2: Further increases the power of the bass
The H.BASS indicator lights on.
Note
You cannot change H.BASS during recording.
The effect may be less discernible with some sound sources.
Discs recorded at 32 kHz, 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
During play
Press [RE-MASTER].
Every time you press the button:
Note
You cannot change RE-MASTER during recording.
This does not work when playing WMA files recorded to a SD card.
H.BASS
Re-master — Enjoying more natural sound
H.BASS
H.BASS
indicator
H.BASS 2H.BASS 1
H.BASS OFF
RE-MASTER ONRE-MASTER OFF
Playing back
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Panasonic SCPM71SD Istruzioni per l'uso

Categoria
Lettore CD
Tipo
Istruzioni per l'uso