Philips 34PT9420/69R Manuale utente

Marca: Philips

Modello: 34PT9420/69R

Categoria: TV LCD

Tipo: Manuale utente

cover 2163.3 (16x24) 07-01-2003 10:16 Pagina 1

cover 2163.3 (16x24) 07-01-2003 10:16 Pagina 2

English

Contents

Preparation 2

Keypad on top of the TV 2

Your remote control 3-5

Use of the menus and the menu system 6

Menu Info / Remote Control Info 7

Select the menu language 7

Store TV channels

Automatic installation 8

Manual installation 9

Give name 9

Reshuffle the channel list 9

Select favourite TV channels 9

Install TV setup

Speakers 10-11

General 11-12

Source 12

Demo 12

Installation

TV menu

Picture menu 13

Sound menu 14-15

Features menu 15-16

Dual screen/PIP 16

Multipip 17

Teletext 17-18

Connect Peripheral Equipment

Connecting and selecting equipment 20-24

Remote control functions for peripherals 24

Recording 24

Before calling service 25

Tips 26

Glossary 26

Specifications 27

Help?

If this instruction manual does not

give an answer or if ‘Before calling

service’ do not solve your TV

problem, you can call your Local

Philips Customer or Service Centre.

See the supplied World-wide

guarantee booklet.

Please, have the Model and Product

number which you can find at the

back of your television set or on the

packaging, ready, before calling the

Philips helpline.

Model: 34PT9420/93

Product No:

Operation

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 1

2 Installation

& Place the TV on a solid surface.

For ventilation, leave at least 5 cm free all

around the TV.

Do not place the TV on a carpet.

To prevent any unsafe situations, do not place

any objects on top of the TV. Avoid heat,

direct sunlight and exposure to rain or water.

Keep mobile telephones at a safe distance to

avoid disturbances in picture and sound.

é Insert the aerial plug firmly into the aerial

socket x at the back of the TV. For best

picture quality use the suppressor-aerial cable

supplied.

“ Remote control: Remove the cover of the

battery compartment.

Insert the 2 batteries supplied (Type R6-1,5V).

Preparation

min.

The batteries supplied do not contain the

heavy metals mercury and cadmium.

Nevertheless in many countries exhausted

batteries may not be disposed of with your

household waste. Please check on how to

dispose of exhausted batteries according to

local regulations.

Note: this remote control functions with TVs and

other equipment which use the RC6 signalling

standard.

‘ Insert the mains plug of the TV in the wall

socket having a mains voltage of 220V-240V.

To prevent damaging the mains (AC) cord

which could cause a fire or electric shock, do

not place the TV on the cord.

( Switch the TV on : Press the power switch

A on the front of your TV.

A green indicator on the front of the TV

lights up when the screen is on.

If the indicator is red, press the

- CH + keys

on the remote control.

The green lamp blinks every time you press a key

on the remote control.

When you switch on your set for the first time,

the menu

Language automatically appears on

the screen.The explanation appears in different

languages one at a time. Choose your own

language and press the OK key on the remote

control.

Keypad on top of the TV

Should your remote be lost or broken you can still change

some of the basic settings with the keys on top of your TV.

• Press the V - or + key to adjust the volume.

• Press the CH - and + key to browse through the TV

channels or sources stored and to select them.

• Press the

M key to summon the main menu.

Use the V - and + keys to select the menu items in the

horizontal axis.

Use the

CH - and + keys to select submenu items in the

vertical axis.

Note:

- Sometimes not all the menu items are visible on the screen.

Press the

CH + key to reveal all items.

- Exit lets you dismiss the menu. Select

Exit and press the M key.

AA - 1,5V

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 2

Use of the remote control

Installation

M h a

SMART

ACTIVE

CONTROL

SMART

PICTURESOUND

213

546

879

‡π

†

DVDVCR AMP AUX

¬V CH

Sb ﬁ

PIXEL

PLUS

v Select peripherals

Press this key repeatedly to select

AV1, AV2, AV3,

AV4 or SIDE, according to where you connected

the peripherals (p. 20).

VCR DVD AMP AUX

Press one of these keys to use the remote control

directly in the video recorder, DVD, amplifier or

other auxiliary mode (

CD, SAT). A green indicator

lights up.

To return to TV mode, press the key again or wait

for the indicator to dim (20 sec.)

B Standby

The set is switched off and the

red indicator lights up.

To switch the TV on again, press

again.

®Ò‡π†

Video recorder see p. 20

x Switching Pixel Plus

demo on/off

& Press the Pixel Plus key.

The TV screen is divided into 2

parts:

- in the left part Pixel Plus and

Digital Natural Motion switched

off;

- in the right part Pixel Plus and

Digital Natural Motion switched

on.

é Press the Pixel plus key again to

switch the Pixel Plus demo off.

b Teletext on/off p. 17

Ï Main menu on/off p. 13

OK Press this key to activate

your choice, when in the menus.

b Dual screen see p. 16.

S Freeze

To activate/de-activate the frozen

picture, p. 12 and to hold a

teletext page. See p. 18.

ﬁ Multipip

see p. 17.

Use the on-screen info for more information about the different

keys. See p. 7.

Use of the remote control

V Press + or - to adjust the

volume.

¬ Interrupt the sound or

restore it.

CH Channel selection

To browse through the TV

channels and sources stored.

Only those channels which are

in the favourite list can be

selected with the

- CH + keys.

0/9 Digit keys

To select a TV channel.

For a two digit channel number,

enter the second digit within 2

seconds.

To switch immediately to a

selected one digit TV channel,

keep the digit key pressed a bit

longer.

i Screen information

Press to display information about the selected TV channel

and programme.

Menu / Remote Control Info

When the menu is on screen, press i to display info on

the selected menu item.While the menu info is displayed,

press any key to display remote control info. See p. 7.

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 3

QZq c

213

546

879

‡π

†

VCR DVD AMP AUX

¬V CH

Sb ﬁ

PIXEL

PLUS

Use of the remote control

0 Smart surf

With this feature you can easily switch between up to 9 different TV channels/sources.

In the menu system, you can set Smart surf to 2- or 9-channel.

Press this key to select the previously viewed TV channel or source in case of a 2 channel

surf, or to select the surf ring in case of a 9 channel surf.

In case of a 9 channel surf, a list appears at the right side of the screen. On top, the most

recent channel is displayed.The puck is on the channel number currently viewed.

Press the 0 key to turn to the next channel in the list or press cursor up/down to

immediately select the desired TV channel of the list.

To add a new channel or source: tune to the channel or source you wish to add.

Press the 0 key. Press the cursor right to add.

If there are already nine channels/sources in the list, the one at the bottom of the list will be

removed.

To remove a channel or source: select the channel number you want to remove.

Press the 0 key. Press the cursor right to remove.

Press the OK key or wait for the time out to dismiss the Smart surf display.

U Time display: The time

is displayed on the screen.

h Teletext function p. 18.

Q Surround mode

Press this key repeatedly to

select another available

surround mode: Stereo, Dolby 3

Stereo, 3D Surround, Hall or

Dolby Pro Logic.

Z ZOOM on/off

Press the

ZOOM Z key to

activate/ deactivate the zoom

function.Press the OK key

repeatedly to select one of the

zoom magnifications (x1, x4, x9,

x16). Use the cursor up/down,

left/right to shift the selected

zoom window over the screen

with the cursor.

The zoom window is reset

after: selecting another TV

channel, another picture format

or when another picture format

is selected automatically.

q Picture format

Press this key repeatedly to

select another picture format:

Auto format, 4:3 or Vertical

squeeze.

Auto format makes the picture

fill the screen as much as

possible.

Vertical squeeze squeezes the

picture to a wide screen picture

format.

c Swapping screens

See p. 16.

Auto format

Vertical squeeze

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 4

Mah

213

546

879

¬V P

SMART

ACTIVE

CONTROL

rc2049 use rc 3

5Use of the remote control

Personal refers to the personal

preference settings of picture

and sound selected in the

picture and sound menu.

Remark: the moment you are in a

predefined smart sound or picture

setting and you modify a setting in

the picture or sound menu, all

values of the menu will overwrite

the previously made Personal

settings. The predefined factory

settings remain unchanged.

Smart Keys

To select predefined picture and

sound settings.

M Smart Sound

Each time it is pressed, a

different sound setting is

selected, corresponding with

specific factory settings of treble

and bass.

a Smart Picture

Each time it is pressed, a

different picture setting is

selected, corresponding with

specific factory settings of

Contrast, Colour, Sharpness,

Dynamic Contrast and Colour

enhancement.

h Active control

Active control is a pro-active and automatic system.The TV continuously

measures and corrects all incoming signals in order to provide the best

picture possible.Thanks to the Ambient Light Sensor which measures the

light conditions of the room, the contrast, dynamic contrast, brightness and

colour picture settings are adjusted automatically. The light sensor is active

when the Active control function is switched to Medium or Maximum.

Press the h key repeatedly to select the Active Control values Off,

Minimum, Medium (recommended) or Maximum.

Off Sharpness and Dynamic Contrast are controlled automatically

Minimum Sharpness, Dynamic Contrast and Noise Reduction are

controlled automatically.

Medium Sharpness, Dynamic Contrast, Noise reduction and Colour are

controlled automatically.

Maximum Sharpness, Dynamic Contrast, Noise reduction, Colour and

Contrast are controlled automatically.

Press the cursor right to select

INFO+.

The Active Control demo menu appears.

The picture settings are being adapted continuously and automatically.

The menu items cannot be selected.

The sliders will be moving, showing how the TV is tweaking the current

picture. None of the sliders is user controllable.

Press the OK key to switch off the Demo.

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 5

66 Installation

Use of the menus and the menu system

213

546

VCR DVD AMP AUX

¬V CH

Sb ﬁ

PIXEL

PLUS

OK key to

activate

cursor to select

adjustments

return or switch

main menu on/off

& Press the MENU Ï key on the remote control to

summon the main menu.

Note: Should your remote control be lost or broken you can still

use the keys on top of the TV. See p. 2.

é Use the cursor in the up/down direction to select the TV,

Settings, Install or Demo menu.

Note: Sometimes not all the menu items are visible on the screen.

Press the cursor down to reveal all items.

“ Use the cursor left/right to select the menu item.

‘ Use the cursor up/down again to select the control you

want to select or to adjust. For instance, see Picture menu.

( Press the

MENU Ï key to turn off the main menu.

The menu system

Pipes, balls and a puck

The hierarchy of menus and controls is

represented by an animated visual mechanism of

pipes, balls and a puck. Unlike a map, however, the

animated mechanism constantly shows the current

whereabouts, continually expands the view of the

immediate neighbourhood.

The puck surrounds the ball indicating the user’s

current position in the menu hierarchy.The puck is

always present when the menu system is displayed.

The puck is divided into 4 parts.They correspond

to the directional controls (up/down, left/right) on

the remote control.The arrows on the cursor

indicate which directions to choose. In this way

users can navigate through the menu hierarchy to

the control they wish to adjust.

When menu items are more numerous than can

fit comfortably on the TV display, only a portion

are shown.

Those omitted are indicated by a cluster of balls

which indicates that there are ‘more’ below.

Direct selection and control

Menu items are controlled as soon as they are

selected by the puck. Only a few items require

information with the OK key.

List controls

A list control is used to select one or more items

from a list of options. Press the right key to move

the puck into the list.At least one item is the

current value and is highlighted.

Moving the puck up or down with the up/down

key causes the list to move up or down.

pipes

puck

balls

Picture Sound Features

Digital options

100 Hz Dig. Scan

Pixel Plus

Double lines

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 6

77Installation

213

546

879

VCR DVD AMP AUX

¬V CH

Mqa

SMARTSMART

Sb ﬁ

PIXEL

PLUS

Language

English

....

.....

Install

Menu Info

& Press the MENU Ï key and select a menu item or

submenu item.

é Press the i key on the remote control to get

information about the selected menu item.

“ Press the i key again to exit.

Remote Control Info

& Press the MENU Ï key.

é Press the i key.

“ Press any key on the remote control (except the

cursor keys, the OK, the

MENU Ï, the digit, the i

and the B keys) and you get information about the

pressed key.

The normal function of the key is not executed.

The moment one of the remote control keys which do

not invoke remote control info, is pressed, remote info

is cancelled.

‘ Press the i key to display the menu that was on

screen before a remote control key for info was

pressed.

213

546

879

x b

VCR DVD AMP AUX

¬V CH

Mqa

SMARTSMART

Sb ﬁ

PIXEL

PLUS

Select the menu language

& Press the MENU Ï key on the remote control.

When you switch on your TV for the first time and no

channels are stored so far, the menu Language

automatically appears on the screen. This menu also has

an additional item

Exit with which the menu can be

dismissed.The explanation appears in different languages

one at a time. Choose your preferred language and press

the OK key on the remote control. Proceed with the Install

menu.

é Use the cursor down to select Install.

“ Use the cursor right to select Language.

Follow the instructions on screen.

‘ Use the cursor up/down to select your preferred

language and press the OK key to confirm your

selection.

( Proceed with the Install menu.

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 7

Store TV channels

Installation

Automatic install

Install Start

Install

You can now search for and store the TV channels in

two different ways: using Automatic Installation or

Manual Installation (tuning-in channel by channel).

Select your choice with the cursor right.

Automatic installation

Select Automatic installation in the

Install menu.

Note: All channels must be unlocked in order

to autoprogram. If requested, enter your PIN

to unlock all channels. (See TV, Features

menu, Child lock, p. 15.)

é Press the cursor down.

The autoprogramming option label

Start

appears.

“ Press the cursor right.

‘ The message Searching appears and the

progress of autoprogramming is

displayed.

When the Automatic installation is

complete, the puck navigates to Install

again.

The channel list is automatically filled

with all the channel numbers of the TV

channels transmitted.

Note: Channel numbers and names will

always be written in Latin characters, even

when a language has been selected which

uses other characters.

Manual installation

Searching for and storing TV channels is

done channel by channel.You must go

through every step of the Manual

Installation menu.

Press the i key on the remote

control to get information about the

selected menu item.

& Select Manual installation in the Install

menu.

é Press the cursor down.

Follow the instructions on screen.

Note: Search or direct selection of a TV

channel. If you know the frequency, enter the

3 digits of the frequency directly with the

digit keys 0 to 9 (e.g. 048). Press the cursor

down to proceed.

Repeat to search for another TV channel.

Manual install

Install

System

Channel

Fine tune

Antenna level

Store

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 8

It is possible to change the name stored in the

memory or to assign a name to a TV channel

for which a name has not yet been entered.A

name with up to 5 letters or numbers can be

given to the channel numbers 0 to 99. For

example SUPER, BBC1,... Before channel

number 0 you can also enter a name for the

peripherals that are connected to an external

input.

& Select Give Name in the Install menu and

press the cursor down.

é Select the channel number.

Note: keep the cursor up/down pressed to scroll

through the channel list and to avoid that the TV

tunes to each channel passed by.

“ Press the cursor right.

A keyboard appears on the screen. Only

European characters are displayed.

Note:

- Dependent on the language selected in the

language menu, the key

Special is available or

not.

- When having selected Arabic, you can toggle the

Special key to display Arabic or English

characters.The

Shift key is changed to More.

Press the More key to toggle between part 1, 2

or 3 of the Arabic character sets.

Press the cursor right to enter the keyboard.

Press the cursor up/down, left/right to select

the first character and press OK. Repeat for

every character you want to enter.

Select

Space to enter a space; Delete to

erase the highlighted character in the name

entered;

Shift to display upper- or undercast

characters on the keyboard;

Special to

display special characters on the keyboard.

Press OK to confirm.

‘ Press the cursor left repeatedly when you

have finished the name giving of the selected

channel or peripheral.

( Select another channel number and repeat

steps “ to ‘.

Give name

Reshuffle the channel list

According to your preference you can change the order of the stored TV channels.

& Select Reshuffle in the Install menu and press the OK key.

é Follow the instructions on screen.

Select Favourite TV channels

Select Favourite channels in the Install menu.

é Select your channel number with the cursor up/down.

“ Select Ye s or No with the cursor right.

‘ Repeat é and “ for every TV channel or external you want to make a favourite or a

non-favourite TV channel or external.

VCR1

BBC1

BBC2

CNN

TVE

π.....

pπ

® Space ® Delete

ABCDEFG 1 23

HIJKLMN 4 56

OPQRSTU 7 89

VWXYZ 0

® Shift (® Special)

Installation

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 9

10 Installation10

The Setup menu contains items that control the

settings of the TV’s functions, features, services and

peripherals you may have connected.

The

Speakers menu reflects the speaker-related

controls.

The

General menu allows you to change settings that

will typically be accessed only occasionally.

The

Source menu allows you to select a source

and/or to name each input source.

Install TV Setup

Speakers General Source

Test tone

Front left volume

Front right volume

(Centre volume)

(Surround volume)

Centre mode

Surround speakers

Auto surround

Setup

Stereo

3 Stereo

3D Surround

Hall

Pro Logic

Availability of Speaker menu items

Test tone

•••••

Front left volume •••••

Front right volume •••••

Centre volume •• •

Surround volume ••

Centre mode •••••

Surround speakers ••

In order to receive the full reproduction

capability of true Dolby Surround Sound you

should include the proper use and

arrangement of the speakers:

• via the TV and its internal Front right,

Centre and Left speakers and two amplified

rear surround speakers connected to the

back of the TV;

• or via the Variable Line Out connectors and

an external Dolby amplifier. See External

speakers/Amplifier, p. 23.

Select the various Speakers menu controls to

setup the configuration of the TV’s speakers

system for Dolby audio playback.

Each volume control can be adjusted to match

test tone levels. Depending on the output and

Surround mode (see Main menu,TV, Surround,

Sound mode, p. 14) selected, some menu items

may be greyed out and are not selectable.

Test tone and Volume controls

The menu item

Test tone enables you to have a

reference of the speakers loudness and to adjust

the level of each until they are balanced in

loudness.The speakers activated light up in the

screen graphic.

& Select

Test tone with the cursor down.

é Press the cursor right to select

On or Off.

“ When turned On, the Test Tone control

generates a sound test signal that circulates

through the individual active speakers in a

clockwise direction, and is meant to be used

with the adjustable volume controls.

Once turned on, the Test Tone will continue

to circulate through the Left, Centre, Right

and both Rear surround speakers (if

present).

‘ Press the cursor up/down to select the

desired speaker for individual volume level

adjustment.

( Press the cursor left/right to adjust the

volume level.

§ Continue and select the other speakers for

adjustment as desired.

è Press the cursor up to return to the Test

Tone menu item when speaker adjustments

are complete and turn the control Off.

Speakers

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 10

Centre Mode

See Connect Peripheral Equipment, External

Speakers,Amplifier, p. 23.

If no external amplifier with front speakers is

connected, do not change the predefined

factory settings which is

Centre mode No.If

an external amplifier with front speakers is

connected, select

Centre mode Yes.

In this setting, the centre channel in surround

mode is directed to all three internal TV

speakers (left, centre and right).

Surround Speakers

See Connect Peripheral Equipment, External

Speakers, p. 23. If no Surround Speakers are

connected do not change the predefined

factory settings which is

Off. If Surround

Speakers are connected select

On.

Dolby Pro Logic and Hall are not available if Off is

selected.

Auto Surround

Sometimes the broadcaster transmits special

signals for Surround Sound encoded channels.

The TV automatically switches to the best

surround sound mode when

Auto Surround

is switched On.

However it is possible to overwrite this

setting.

General

This menu allows you to change various

settings that are presumably adjusted less

frequently than most other settings.

Press the i key on the remote

control to get information about

the selected menu item.

Dual screen format

The Dual screen and PIP functions allow you to view

two TV channels or sources at one time, hearing

audio from the main screen through the speakers

and audio from the other screen through the

headphones.This menu allows you to select the

preferred format which can then be displayed

toggling the b key on and off. See Dual screen/PIP,

p. 16.

& Select

Dual screen format with the cursor down.

é Press the cursor right.

“ Select Dual screen, Large PIP, Medium PIP or Small

PIP with the cursor up/down.

When Dual screen is selected, and Dual screen

mode is activated with the remote control b key,

the TV splits the screen into two equally sized

screens.

When a PIP mode is selected, and Dual screen mode

is activated with the remote control b key, the TV

shows a full screen of video with a small, medium or

large window of video on top of it.

Note: Continuing to hold the b key down will also cycle

the TV through the various formats (Dual screen, Large

PIP, Medium PIP, Small PIP) launching a new format after

each second the key is hold. Changing the format this

way does not store the selected format.

Installation

General

Menu background

Smart surf

Dual screen format

Multipip format

Freeze format

Factory settings

Tilt adjust

OSD

Channel title

Teletext level 2.5

Set/Change code

(Colour)

(PLL)

Setup

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 11

12 Use of the menus

Source

This menu allows you to select the

peripheral you connected to one of the

external inputs.

Source

AV1

AV2

AV3

AV4

Side

Setup

& Select Source with the cursor right.

é Press the cursor down to select one of the

external inputs.

“ Press the cursor right to enter the list of

names of peripherals attached to the

selected input.

‘ Select the peripheral device with the cursor

up/down.

Once you have selected the source, e.g.VCR,

this AV-input will automatically be selected

when your remote control is in VCR mode

and when you press the v key on the

remote control. See p. 24.

Demo menu

Auto demo

Dual screen

Freeze-Replay-Photo finish

PIP

Zoom

Teletext

Install

Main menu

Picture

Speakers

Active control

Dealer demo - Digital options

- Light sensor

- Comb filter

Setup

Demo

Install

The Demo menu allows to demonstrate the TV features

separately or in a continuous loop.

& Select

Demo in the Main menu with the cursor down.

é Select

Auto demo or one of the features with the cursor

right and press the OK key on the remote control.

Auto demo has been selected the demo will

automatically present all the features sequentially in a loop.

Press one of the cursor keys to stop the Auto demo.

If one of the features has been selected, this particular

feature demo will run one time only, until activated again,

and the Demo menu will reappear.

Select Dealer Demo

Select

Digital options, Light sensor and Comb filter On

or Off to really see the difference in picture quality.

In Dealer Demo mode it is possible to change channels with

- CH + and to adjust the volume.

Note: the Dealer Demo is not part of the automatic sequence

and can only be activated separately.

Multipip format

In this menu you can select which format

you prefer to see in Multipip: PIP 3 or PIP 6,

referring to the number of PIP screens being

displayed pressing the ﬁ key on the remote

control.

Note: Continuing to hold the ﬁ key down will

also cycle the TV through the various formats.

Changing the format this way does not store the

selected format.

& Select

Multipip format with the cursor

down.

é Press the cursor right and select PIP 3 or

PIP 6 with the cursor up/down. See Multipip,

p. 17 how to operate.

Freeze format

Freeze format allows you to select among

three options:

Freeze, Replay, Photo finish,

to be activated when you press the S key

on the remote control. See p. 3.

In this menu you can select which option

you prefer.

Note: Continuing to hold the S key down will

also cycle the TV through the various

formats. Changing the format this way does not

store the selected format.

& Select

Freeze format with the cursor down.

é Press the cursor right and select Freeze,

Replay, Photo finish with the cursor

up/down.

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 12

13Use of the menus

Picture Sound Features

Contrast

Brightness

Colour

Sharpness

Tint

Digital options

Dynamic contrast

DNR

Colour enhancement

(Hue)

Smart picture

Picture format

TV menu

213

546

VCR DVD AMP AUX

¬V CH

Sb ﬁ

PIXEL

PLUS

OK key to

activate

cursor to select

adjustments

return or switch

main menu on/off

Digital options with PAL signals

Although Pixel Plus is the most ideal setting, it

may be preferable, dependent on your own

preference, to select Double lines, or 100 Hz

Digital Scan.

•

100 Hz Dig. Scan = 100 Hz + Dig. Scan (Field

and line flicker reduction) without motion

compensation.

•

Pixel Plus = creates near High Definition

performance inside the TV on the basis of a

regular input signal.

The number of lines are increased and the

number of pixels on a line are doubled in

combination with Digital Natural Motion.As

such Pixel Plus enhances both regular

broadcast signals and DVD or Digital TV input

towards unparalleled sharpness and depth,

near High Definition and natural detail.

•

Double Lines = provides for a doubling of

vertical and horizontal resolution which adds

astonishing sharpness and a total absence of

visible picture lines.

Motion compensation reduces jitter and offers

smooth, yet sharp motion reproduction.

Digital options with NTSC signals

•

Progressive Scan = line doubling eliminates

line flicker.

•

Pixel Plus

Note:

- Pixel Plus is not active when Multipip,Teletext

(Except when Subtitling is activated) or Teletext

Dual screen is selected.

- When having selected Pixel Plus, the size of the

menus on screen is reduced.This is a normal

behaviour.

- Interference, caused by fluorescent lights just above

the TV, may occur when having selected Pixel Plus.

The modified adjustments for Contrast,

Brightness, Colour, Sharpness,Tint, Digital options

and Dynamic Contrast are automatically stored.

Select

Factory settings in the Setup menu,

General, to restore the predefined factory

settings, see p. 11.

Press the MENU Ï key on the remote

control to summon the main menu.

Use the on-screen Menu-Info, see p. 7, for

more information about the menu items.

Picture menu

Press the cursor right to select Picture.

Select the menu items in the Picture menu

with the cursor up/down.

Adjust the settings with the cursor left/right

or enter the list of submenu items with the

cursor right.

Select a submenu item with the cursor

up/down.

Note:To remove the menu background before

adjusting the picture settings, see Select TV setup,

General, p. 11.

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 13

14 Use of the menus

Surround Modes

Dependent on the sound signal broadcasted,

select one of the Surround modes.

Stereo

This mode reproduces only

the left and right front

sound signals.

You only hear a stereo

sound if the broadcast

which you are receiving is

transmitted in stereo or

nicam stereo.

Dolby 3 Stereo

(optimal with Dolby Surround broadcasting)

The sound signal is now

distributed over the front

left, the front right and

the centre TV

loudspeakers.

The rear loudspeakers do

not produce any signal.

3D Surround

(optimal with Dolby Surround broadcasting)

3D Surround enables you

to experience the effect of

Dolby Surround Pro Logic*

without the need of having

rear speakers connected or

activated.The graphical

representation of the rear loudspeakers is

replaced by the symbol ®r.

Select the level of 3D effect with the cursor

left/right.

Hall

The special sound signal is

distributed over the rear

loudspeakers which

creates a hall effect from

the rear.

The centre loudspeaker

does not reproduce any

signal.

This mode is recommended when you wish to

add surround sound to a broadcast which is not

encoded Dolby Surround or to a mono signal.

Pro Logic

(with Dolby Surround broadcasting)

In addition to the left and

right internal speakers, the

centre and the rear

surround loudspeakers

reproduce the Dolby

Surround Pro Logic

sounds.

This sound is always present in the movie or

programme marked with G Dolby

Surround.This mode is especially recommended

for such programmes or movies.Dolby Pro Logic

signals are also present on some DVD tracks.

Note: Normal stereo broadcast is not always

encoded to produce a rear surround sound.

Pro Logic and Hall can only be reproduced if

Surround speakers is set to Yes in the Setup, Speaker

menu, p. 11, and rear speakers are connected.

Sound menu

Press the cursor right to select Sound.

Select the menu items in the Sound menu with the

cursor up/down and adjust the settings with the cursor

left/right.

Remember, control settings are at normal mid-range

levels when the bar scale is centred.

Note:

- Dual X is only available with dual sound transmission.

- Mono/Stereo is only selectable in case of analogue stereo

transmission.

- Nicam/Analogue is only selectable in case of Nicam

transmission.

- Surround modes can not be modified when a headphone

has been connected.

Sound

Volume

Equalizer

Headphone volume

Surround mode

(Dual I-II)

(Mono/Stereo)

(Nicam/Analogue)

(3D effect)

AVL

Delta volume

Smart sound

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 14

151515Use of the menus

With two extra front loudspeakers connected

To enhance the sound reproduction of your TV you

may connect two extra front loudspeakers via an

external amplifier. See Connect Peripheral Equipment,

Extra loudspeakers/Amplifier, p. 23.

In the Surround modes

+ ext. amp is added to

indicate that you should switch on your amplifier as

in these modes the internal TV speakers produce

only centre sound.The subwoofer speaker is muted.

Note: If extra front speakers are connected and selected,

all internal TV speakers produce centre sound in the

surround modes Pro Logic*, Dolby 3 Stereo and 3D

Surround.

Features menu

‘Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Manufactured under license from Dolby Laboratories Licensing Corporation.

Features

Channel list

Subtitle

Sleeptimer

Child lock

On timer

Lock

Custom lock

Unlock

Channel lock

Press the cursor right to select Features.

Select the menu items in the Features menu with

the cursor up/down and adjust the settings with

the cursor left/right.

Use the on-screen Menu-Info i for more

information about the menu items.

Channel list

Press the OK key to switch over to the selected

TV channel or external.

Select subtitles

Switch on teletext and select the proper subtitle

page from the index.

Switch off teletext.Now the subtitle page is

stored for the selected TV channel.

Once subtitles have been stored and

Subtitle

has been selected they will automatically be

displayed on the selected TV channels if subtitles

are in the transmission.

A symbol will indicate that the mode is on.

Select

On during mute when you want to have

the subtitles automatically displayed when the

sound has been muted with the ¬ key on the

remote control.

Child lock

& Select

Child lock with the cursor down.

é Press the cursor right to enter the Child lock

menu.You’re summoned to enter your code.

Enter the access code.

Note:You have to re-enter your code each time you

enter the child lock menu.

Important:You have forgotten your code !

• Select Cancel with the cursor down.

• Select Set/Change code in the Setup

menu. See General menu, Set/Change

code, p. 11.

• Press OK.

• Press the cursor right and enter the

overriding code 8-8-8-8.

• Press the cursor again and enter a new

personal 4-digit code.The previous code is

erased and the new code is stored.

Note:The overriding code only works in the

Set/Change code menu.

“ Select one of the menu items of the child lock

menu.

• Select

Lock if you want to lock all channels

and externals.

• Select

Custom lock and press the cursor

right. Select Channel lock if you want to lock

the programmes from a certain TV channel or

external.

• Select

Unlock to unlock all locked channels

and externals at once.

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 15

Dual screen/PIP

VCR DVD AMP AIX

S ﬁ

®Ò‡ π†

PIXEL

PLUS

Press the b key to turn on or off Dual

screen or PIP, according to the format

selection made in the Dual screen format list

in the General menu, p. 11.

Audio from the main screen (the left screen

in Dual screen and the full size screen in PIP)

plays to the speakers;Audio from the right

screen or from the PIP plays to the

headphones.

Note: Continuing to hold the b key down will

cycle the TV through the various formats (Dual

screen, Large PIP, Medium PIP, Small PIP),

launching a new format after each second the

key is held down.

To highlight a screen

Pressing the cursor left/right will toggle the

highlight between the left and the right

screen or between the main and the PIP

screen.The highlighted screen is made visible

with a yellow border.

Changing TV channels or external sources in left,

right or PIP screen

Press the

- CH + key, the digit keys or the 0 key in

order to change the TV channels or the external

sources in the highlighted screen.

Making the PIP screen movable

& Select a PIP format.

é Highlight the PIP picture with the cursor left/right

and press the OK key to make the PIP screen

movable.

The PIP screen can now be moved.This is made

visible with a blue border around the PIP screen.

“ Press the cursor up/down, left/right to move the PIP

screen in the direction of the cursor press.

‘ Press the OK key again.The PIP screen position is

fixed.

Swapping screens

Press the c key to swap the left and the right screen

or the PIP screen. See notes below.

On-Screen information

The On-Screen information, which appears when

changing channels, always refers to the highlighted

screen.

Deactivating Dual screen mode

Press the b key again to return to a full main screen

picture.The TV tunes to the picture which was

highlighted in Dual screen mode.

Note: When Dual screen mode is selected, two picture

formats are supported: Full screen or 4:3 letterbox picture

format (vertical squeeze).

Dual screen

On timer

& Select

On timer with the cursor down.

é Select

On with the cursor right.

“ Press the cursor right again to enter the

channel list.

‘ Select the TV channel or external you want

your TV to switch to on a selected time and

day.

( Press the cursor right again to select a day

of the week or to select

Daily.

Select

Daily to set the On timer for daily

operation on the selected TV channel or

source.

§ Press the cursor right once again to enter

the time.

è Enter the time with the digit keys or with

the cursor up/down/left/right.

! Press the

OK key to activate.

ç Press the

MENU Ï key to turn off the

menu.

Note:To check your timer settings, press the i

key

VCR1

BBC1

BBC2

CNN

TVE

π.....

Sunday

Monday

.......

Daily

15:45

On timer

Off

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 16

171717Multipip & Teletext

Multipip

In the Setup menu, General, p. 12 you selected which Multipip format

you prefer to see.

& Press the ﬁ key on the remote control to toggle the selected

Multipip format On or Off.

The main screen displays the channel or source tuned before Multipip

was activated and the highlight is on the main screen.

é Press the cursor left/right, up/down to highlight a PIP screen.When the

highlight is on one of the PIP screens, it begins playing video and the

other PIPs freeze.The main screen always continues playing audio and

video.

“ Pressing the

- CH + or the 0 key or the digit keys changes the

channel or source for the currently highlighted screen.

Note: channels cannot be added or deleted from the Smart surf list when

Multipip is activated.

‘ Press the c key to swap the highlighted screen and the main screen.

Press the cursor up/down to display a following series of PIP screen.

Note: Only TV channels which are in the favourite list and pictures from the

connected and activated externals are displayed in the PIP screen.

PIP 6

PIP 3

PIXEL

PLUS

æ b

S j

DVDVCR AMP AUX

ﬁ

®Ò‡ π†

ﬁ

Teletext

213

546

879

x b

®Ò‡ π†

ﬁ

VCR DVD AMP AUX

¬V CH

PIXEL

PLUS

QZq c

INSTANT

colour keys to

select

Mon 05 Feb 16.35.22

BBC CEEFAX

LIONS RECORD ANOTHER WIN 430

Index 100 News 300

BBC Info 110 Headlines 305

Children 120 Weather 400

Cookery 150 Sports 415

Education 200 Radio 500

Lottery 230 Travel 550

Finance 240 Subtitling 888

Music 280 TV Listings 600

puck

Red Green Yellow Blue

Menu 100 01

Favourite

Most TV channels broadcast information via teletext.

This TV has a 1200 pages memory that will store most

broadcasted pages and subpages to reduce waiting time.

After each channel change, the memory is refreshed. It

may take some time for all pages to load.

Depending on the TV channel, teletext is transmitted in

different systems.The colours used in the bottom line of

the teletext page correspond with the colour keys of

your remote control.

Switch Teletext on and off

Press b to switch the teletext on or off.

The main index page appears on the screen.

It shows an information line at the top, an option line at

the bottom and a puck in the top left corner of the

screen.

(only English teletext supported)

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 17

Select a Teletext page

With the digit keys

Enter the desired page number with the digit

keys.

The page counter seeks the page or the page

appears immediately when the page number has

been stored in the memory.

A message appears when you have entered a

non existent or incorrect page number. Page

numbers beginning with 0 or 9 do not exist.

Choose another number.

With the option line

Select with the colour keys, corresponding to

the coloured options at the bottom of the

screen, the desired subject.

Quickly run through the txt pages

Press the cursor up/down or the - CH + key to

run through the previous or the following pages.

Select the previously selected page

Press the 0 key.

Note: Only possible when teletext pages are active,

not when the Teletext menu is displayed.

Select the index teletext page

Press the grey colour key † to display the

main index (usually p.100).

Select subpages

When a selected teletext page consists of

different subpages, one of the subpages appears

on the screen.

Press the cursor right to highlight the

subpagenumber. Press the cursor up/down to

select the next or previous subpage or enter the

subpagenumber with the digit keys.

Special teletext functions

Hold

Press S to stop the automatically rotating of

the subpages or to stop the page counter from

seeking when you have entered a wrong page

number or when the page is not available. Enter

another page number.

Enlarge

Press h repeatedly to display the upper part,

the lower part and then to return to the normal

page size.When the upper part is displayed, you

can scroll the text, line by line using the cursor

up/down.

Hypertext

With hypertext you can select and search for

pages containing any word or number on the

current teletext page.

& Make sure you are not in the teletext menu

and that the puck is in the upper left corner

of the screen.

é Press the cursor key down to highlight the

first word or a number on the page.

“ Use the cursor up/down, left/right to select

the word or number you want to search for.

‘ Press the OK key to confirm.

A message appears at the bottom of the

screen to indicate that the searching is going

on or that the word or page is not found.

Select Continuous Subtitles

TV channels with teletext often transmit

programmes with subtitling. For each TV channel

you can store a subtitle page.

Switch on teletext and select the proper subtitle

page from the index.

Switch off teletext. Now the subtitle page is

stored for the selected TV channel.

Select

Subtitle On or Off in the Features menu,

see p. 15.The subtitle symbol j appears when

Subtitle On is selected.

Teletext

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 18

La pagina sta caricando ...

Philips 34PT9420/69R Manuale utente

Marca: Philips

Modello: 34PT9420/69R

Categoria: TV LCD

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Philips 34PT9420/69R User manual

Philips 34PT9420/69R Manuale utente

Philips 34PT9420/69R Manuale utente

in altre lingue

Documenti correlati

Altri documenti