Panasonic ER-GC71 AC Rechargeable Hair Clipper Manuale utente

Operating Instructions

(Household use) AC/Rechargeable Hair Clipper

Model No. ER-GC71/ER-GC63/ER-GC53

PB017706 - ER-GC63 53

��

_(00COVER)_04-01-19.indd 1

2019/4/1 17:24:05

English

3

Português

125

Česky

247

Deutsch

21

Svenska

145

Slovensky

267

Français

43

Dansk

165

Magyar

287

Italiano

63

Norsk

185

Română

309

Español

83

Suomi

205

Türkçe

329

Nederlands

105

Polski

225

2

PB017706 - ER-GC63 53

��

_(00COVER)_04-01-19.indd 2

2019/4/1 17:24:06

Operating Instructions

(Household use) AC/Rechargeable Hair Clipper

Model No. ER-GC71/ER-GC63/ER-GC53

Contents

Safety precautions .................... 6

Important information ......................... 9

Parts identification ............................... 10

Preparation. ....................................... 11

Using the clipper ................................ 12

Maintenance ....................................... 15

Troubleshooting ................................ 17

Blade life ............................................ 18

Battery life .......................................... 18

Removing the built-in

rechargeable battery ......................... 18

Specifications ........................................19

Thank you for purchasing this Panasonic product.

Before operating this unit, please read these instructions completely and save them for future use.

3

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd 3

2019/4/25 15:04:00

English

Warning

• This appliance can be used by children aged from

8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without

supervision.

• The supply cord cannot be replaced. If the cord is

damaged, the AC adaptor should be scrapped.

• The following symbol means suitable for cleaning under

an open water tap.

4

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd 4

2019/4/25 15:04:00

English

• Do not clean with water when the AC adaptor is

attached.

• Do not use anything other than the supplied AC adaptor

for any purpose.

Also, do not use any other product with the supplied AC

adaptor. (See page 10.)

• The following symbol indicates that a speciﬁc

detachable power supply unit is required for connecting

the electrical appliance to the supply mains. The type

reference of power supply unit is marked near the

symbol.

(One of the power supply unit speciﬁed is provided with

this appliance.)

5

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd 5

2019/4/25 15:04:00

English

Safety precautions

To reduce the risk of injury, loss of life, electric shock,

ﬁre, and damage to property, always observe the

following safety precautions.

Explanation of symbols

The following symbols are used to classify and

describe the level of hazard, injury, and property

damage caused when the denotation is disregarded

and improper use is performed.

► This product

This product has a built-in rechargeable

battery. Do not throw into flame or heat.

- Doing so may cause fluid leak, overheating, or

explosion.

Do not modify or repair.

- Doing so may cause ﬁre, electric shock, or injury.

Contact an authorized service centre for repair

(battery change, etc.).

Never disassemble except when disposing of

the product.

- Doing so may cause ﬁre, electric shock, or injury.

► In case of an abnormality or malfunction

Immediately stop using and remove the

adaptor if there is an abnormality or

malfunction.

- Failure to do so may cause ﬁre, electric shock,

or injury.

• The main body or AC adaptor is deformed or

abnormally hot.

• The main body or AC adaptor smells of

burning.

• There is abnormal sound during use or

charging of the main body or AC adaptor.

- Immediately request inspection or repair at an

authorized service centre.

The following symbols are used to classify and

describe the type of instructions to be observed.

6

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd 6

2019/4/25 15:04:01

English

This symbol is used to alert users to a speciﬁc

operating procedure that must not be performed.

This symbol is used to alert users to a speciﬁc

operating procedure that must be followed in

order to operate the unit safely.

Denotes a potential

DANGER hazard that will result in

serious injury or death.

Denotes a potential

WARNING

hazard that could result

in serious injury or

death.

Denotes a hazard that

CAUTION could result in minor

injury or property

damage.

WARNING

Always unplug the adaptor from a household

outlet when cleaning.

- Failure to do so may cause electric shock or

injury.

► Power supply

Do not connect or disconnect the adaptor to

a household outlet with a wet hand.

- Doing so may cause electric shock or injury.

Do not immerse the AC adaptor in water or

wash with water.

Do not place the AC adaptor over or near

water filled sink or bathtub.

Never use the appliance if the AC adaptor is

damaged or if the power plug fits loosely in a

household outlet.

Do not damage the cord or power plug.

• Do not deface, modify, forcefully bend or

pull the cord or power plug.

Also, do not place anything heavy on, twist

or pinch the cord.

-

Doing so may cause electric shock or ﬁre due

to a short circuit.

Do not use in a way exceeding the rating of

the household outlet or the wiring.

-

Exceeding the rating by connecting too many

plugs to one household outlet may cause ﬁre

due to overheating.

Always ensure the appliance is operated on

an electric power source matched to the

rated voltage indicated on the AC adaptor.

Fully insert the adaptor.

-

Failure to do so may cause ﬁre or electric shock.

Regularly clean the power plug and the

appliance plug to prevent dust from

accumulating.

- Failure to do so may cause ﬁre due to insulation

failure caused by humidity.

→Disconnect the adaptor and wipe with a dry

cloth.

► Preventing accidents

Do not store within the reach of children or

infants. Do not let them use it.

-

Putting parts or accessories in the mouth may

cause an accident or injury.

If the oil is consumed accidentally, do not

induce vomiting, drink a large amount of

water, and contact a physician.

If the oil comes into contact with eyes,

immediately wash thoroughly with running

water, and contact a physician.

-

Failure to do so may result in physical

problems.

7

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd 7

2019/4/25 15:04:02

English

WARNING

Disconnect the adaptor from the household

outlet when not using.

-

Failure to do so may cause electric shock or ﬁre

due to electrical leakage resulting from

insulation deterioration.

Disconnect the adaptor or the appliance plug

by holding onto the adaptor or the appliance

plug instead of the cord.

-

Failure to do so may cause electric shock or

injury.

► Protecting the skin

Do not press the blade strongly on your lip or

skin.

Do not use this product for any purpose

other than trimming beard and hair.

Do not directly apply the blades on ears or

rough skin (such as swellings, injuries or

blemishes).

- Doing so may cause skin injury.

Handling of the removed battery when disposing

Check that the blades are not damaged or

deformed before use.

- Failure to do so may cause skin injury.

► Note the following precautions

Do not allow metal objects or trash to adhere

to the power plug or the appliance plug.

- Doing so may cause electric shock or ﬁre due

to a short circuit.

The rechargeable battery is exclusively for

use with this appliance. Do not use the

battery with other products.

Do not charge the battery after it has been

removed from the product.

Do not throw into fire or apply heat.

Do not solder, disassemble, or modify the

battery.

Do not let the positive and negative terminals

of the battery get in contact with each other

through metallic objects.

Do not carry or store the battery together

with metallic jewellery such as necklaces and

hairpins.

Never peel off the tube.

- Doing so may cause fluid leak, overheating, or

explosion.

Do not drop or hit against other objects.

- Doing so may cause injury.

Do not wrap the cord around the adaptor and

main body when storing.

- Doing so may cause the wire in the cord to

break with the load, and may cause ﬁre due to

short circuit.

8

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd 8

2019/4/25 15:04:04

English

DANGER

CAUTION

Important information

• Before using an attachment, check that it has been

installed correctly. Failure to do so may cause hair to

be cut too short.

• The appliance should not be used on animals.

• Before and after each use, apply oil at the places

marked with arrows. (See page 17.)

Failure to apply the oil may cause the following

problems.

-

The blade has become blunt.

-

Shorter operating time.

-

Louder sound.

• Store the main body in a place with low humidity after

use. Failure to do so may cause malfunction due to

condensation or rust.

• The appliance may become warm during operation

and/or charging. This is normal.

• Charge the appliance correctly according to these

Operating Instructions. (See page 11 “Charging”.)

• This appliance contains battery that is only

replaceable by skilled persons. Please contact an

authorized service centre for the details of repair.

The battery contains alkaline fluid. If it comes

in contact with the eyes, do not rub the eyes,

and thoroughly rinse with clean water, such

as tap water.

- Failure to do so may cause loss of vision.

→Consult a physician immediately.

After removing the rechargeable battery, do

not keep it within reach of children and

infants.

- The battery will harm the body if accidentally

swallowed.

→If this happens, consult a physician

immediately.

The battery contains alkaline fluid. If it comes

in contact with the skin or clothes, rinse off

with clean water, such as tap water.

- Failure to do so may cause skin injury.

9

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd 9

2019/4/25 15:04:04

English

WARNING

DANGER

Parts identification

A

B

E

(J

@

®

ER-GC71

ER-GC63/

ER-GC53

C

D

F

G

H

ER-GC71/

ER-GC63

ER-GC71

Main body

1 Trimming height indication mark

2 Dial (Height adjustment control)

9 Stationary blade

Mounting hook

Comb attachment [

(1 mm to 10 mm)

Comb attachment [

ER-GC71/ER-GC63

(11 mm to 20 mm)

AC adaptor

Adaptor

Power plug

Cord

Appliance plug

Accessories

Cleaning brush

G Oil

H Pouch ER-GC71

]

3 Power switch [ /

]

4 Charge indicator lamp (

)

5 Appliance socket

6 Water inlet

Blade

ER-GC71

ER-GC63/ER-GC53

7 Cleaning lever

8 Moving blade

(RE9-49/RE9-52/RE9-86)

• The shape of the AC adaptor

differs depending on the area.

• One of the power supply units

speciﬁed is provided with this

appliance.

10

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

10

2019/4/25

15:04:06

English

Notes

• To keep charging the battery will not affect battery

performance.

• If there is crackling noise on radios or other devices

while charging, charge the clipper using a different

household outlet.

• When the appliance is not used for 6 months or more,

the battery will weaken (leak battery fluid, etc.). Fully

charge the battery once every 6 months.

• When charging the clipper for the ﬁrst time or when it

has not been in use for more than 6 months, the

charging time may change or the lamp on the main

body may not glow for a few minutes. Please charge it

for more than 16 hours in such cases.

• Recommended ambient temperature for charging is

0 °C – 35 °C. Battery performance may decrease

outside of the recommended temperature.

• A full charge supplies enough power for

approximately 40 minutes of use. (Based on dry

using at 20 °C – 30 °C.)

The operating time may differ depending on the

frequency of use, the operating method and the

ambient temperature.

• You can charge the battery before it is completely

discharged. However, it is recommended to charge

when the battery is completely discharged. The

battery life depends strongly on factors such as how

it is used and stored.

Preparation

Charging

• Make sure that the clipper is turned off.

1

2

Connect the appliance plug to the

appliance socket.

Plug in the adaptor into a

household outlet.

• Charging is completed after

approx. 8 hours.

• Check that the charge indicator

lamp ( ) glows.

2

1

3

Disconnect the adaptor after charging is

completed.

(for safety and to reduce energy usage)

The charge indicator lamp ( ) continues to glow

after charging is complete. There is no indication to

show that “charging is complete”.

11

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

11

2019/4/25 15:04:07

English

AC operation

If you connect the AC adaptor to the clipper in the

same way as for charging, and turn on the power, you

can use it.

• If the remaining battery is too low, the blades may

move slowly or stop, even with the AC operation. In

this case, charge the battery for 3 minutes or more.

• The battery will be discharged, even with the AC

operation.

Removing and mounting the comb attachments

• Take care not to injure hands, etc., with the blade

when removing or mounting the attachment.

Removing the comb attachment

Hold the main body securely and remove

the comb attachment from the main body.

Mounting the comb attachment

Mount the comb attachment to the main

body until it clicks.

• If the comb attachment is not attached

correctly, it may shift and end up cutting

too much during use.

• Make sure that the clipper is turned off.

• Apply the oil to the clipper before and after each use.

(See page 17.)

• The appliance may not operate in an ambient

temperature approximately 0 °C or lower.

1

Mount the desired comb attachment and adjust

the trimming height as needed. (See pages 12

and 13.)

• It can also be used without the comb attachment.

(Trimming height: approx. 0.5 mm)

How to adjust the trimming height

• Make sure that the clipper is turned off.

Turn the dial and adjust the trimming height

indication mark ( a ) to the desired height.

2

Slide the power switch on the main

a

body to the “

the power.

Trimming hair

Trimming beard

” position to turn on

(See pages 13 and 14.)

(See pages 14 and 15.)

ER-GC71/

ER-GC63

ER-GC53

12

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

12

2019/4/25 15:04:08

English

Using the clipper

► Comb attachment

[ ]

Trimming height

(estimate):

1 mm to 10 mm

Trimming hair

• Do not use when the hair is wet.

A wet hair may stick to the skin or bunch up, making it

difﬁcult to trim.

• To maintain sharpness, remove hair trimmings

between usages.

• Before trimming, comb your hair with a comb.

Adjusting the length around the ears and sides

Holding the clipper with the power

switch facing outwards, trim

around the ears and sides by lifting

the tip of the comb attachment little

by little from the hairline.

ER-GC71/

ER-GC63

ER-GC53

► Comb attachment [ ]

ER-GC71/ER-GC63

Trimming height (estimate):

11 mm to 20 mm

• Trim your hair while holding

down your ear with one hand.

Holding the clipper with the

power switch facing outwards,

trim from the neckline to the

back of your head by lifting the

tip of the comb attachment little

by little from the hairline.

Notes

• Actual hair length will be a little longer than the height

you set.

• Setting of 10.5 mm is unavailable.

• It can also be used without the comb attachment.

(Trimming height: approx. 0.5 mm)

13

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

13

2019/4/25 15:04:13

English

How to align the length at the neckline and at the

back of your head

Indicator

16

17

18

19

20

Trimming height

(mm) (estimate)

16

16.5

17

17.5

18

18.5

19

19.5

20

Indicator

11

12

13

14

15

Trimming height

(mm) (estimate)

11

11.5

12

12.5

13

13.5

14

14.5

15

15.5

Indicator

6

7

8

9

10

Trimming height

(mm) (estimate)

6

6.5

7

7.5

8

8.5

9

9.5

10

Indicator

1

2

3

4

5

Trimming height

(mm) (estimate)

1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

Shaping your sideburns

Trimming to an even length

Holding the clipper with the

power switch facing outwards,

trim slowly while crisscrossing

from various directions to

avoid missing any spots.

Notes

• It is recommended to ask someone else to trim

around your own ears and neckline.

• The desired results may not be achieved if hair is too

long. In this case, trim the hair to a length of about

2 cm before using the clipper.

Holding the clipper with the power switch at the

bottom, keep the blade at an angle of 90° against

the sideburns and move the clipper from top to

bottom along the skin to trim the sideburns.

Trimming the downy hair around the neckline

Trimming beard

• Do not use with shaving foam applied or when the

beard is wet.

A wet beard may stick to the skin or bunch up, making

it difﬁcult to trim.

• Before trimming, comb your moustache with a comb.

Holding the clipper with the

power switch at the bottom,

touching the blade perpendicular

to the area of downy hair, and

move the clipper downward

along the skin.

90°

Trimming to an even length

Holding the clipper with the power

switch facing outwards, trim by

bringing the blade in contact with

the skin and moving the clipper

against the flow of the beard.

• Hair trimmings may collect inside the

comb attachment when a large

volume of beard is cut, so discard hair

trimmings after each use.

14

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

14

2019/4/25

15:04:14

English

Without comb attachment

Trimming the downy hair

Cleaning with water

Main body, blade and comb attachment

Holding the clipper with the power

switch facing outwards, trim by

bringing the blade in contact with

the skin.

• The clipper cannot trim hair to

lengths less than 0.5 mm.

Maintenance

• Clean the clipper and the blade after each use.

(If not cleaned, the motion will become poor and the

sharpness will worsen.)

• Make sure that the clipper is turned off.

• Remove the clipper from the AC adaptor.

• Do not use thinner, benzine, alcohol or other

chemicals. Doing so may cause failure, cracking or

discoloration of the main body. Clean the main body

only with a soft cloth slightly dampened with tap water

or soapy tap water.

15

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

15

2019/4/25 15:04:15

English

To remove light dirt

To remove heavy dirt

1.

Remove the comb

attachment and turn

the clipper on.

2.

Run water down the

water inlet at the front

of the main body, rinse

thoroughly for

approximately 20

seconds, and then turn

the clipper off.

1.

Remove the comb

attachment and blade.

2.

Clean the clipper, the

blade and the comb

attachments with

running water.

• Shake up and down several times to remove the

water.

• Be careful not to hit the main body on the sink or

any other object while draining the water. Failure

to do so may cause malfunction.

Without comb attachment

3.

Wipe off the water with a towel

and let it dry naturally.

• It will dry faster with the blade

removed.

4.

Apply the oil to the blade after

drying. (See page 17.)

5.

Attach the blade and

attachment to the main body.

Removing and mounting the blade

Removing the blade

Hold the clipper with the switch

facing upward and push the

blade with your thumb while

catching the blade in your other

hand.

Mounting the blade

Fit the mounting hook (

B

) into the blade mounting (

A

)

on the clipper and then push in until you hear a click.

Cleaning with the brush

Main body and blade

• Remove the blade. (See this page.)

1. Brush off any hair trimmings

from the main body and from

around the blade.

A

B

2.

Brush off the hairs from the

blade edge.

3.

Brush any hair trimmings out

from between the stationary

blade and the moving blade

while pressing down the

cleaning lever ( a ) to raise the

moving blade.

4.

Apply the oil to the blade. (See page 17.)

a

5. Attach the blade and attachment to the main body.

16

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

16

2019/4/25

15:04:16

English

Lubrication

• Apply the oil to the clipper before and after each use.

• Make sure that the clipper is turned off.

► Replacement parts

Replacement part is available at your dealer or Service

Centre.

1

2

3

Remove the blade.

Apply a drop of the oil to

each indicated point.

Attach the blade to the

main body, turn on the

power and allow to run for

approximately 5 seconds.

• Do not use any blade other than the one dedicated as

it may cause defect in performance.

• We recommend Panasonic oil WES003.

Troubleshooting

ER-GC71

ER-GC63/ER-GC53

17

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

17

2019/4/25 15:04:17

English

Action

When the clipper is very dirty,

remove the blade and wash

with water. (See page 15.)

Conﬁrm that the blade is

properly attached.

Replace the blade.

(See page 16.)

Clean the blade and apply oil.

(See pages 15 to 17.)

Problem

The blade has not

been cleaned

properly.

Makes a loud

sound.

The clipper has

become blunt.

Perform the following actions.

If the problems still cannot be solved, contact the

store where you purchased the unit or a service

centre authorized by Panasonic for repair.

Replacement parts

for ER-GC71/

ER-GC63/ER-GC53

Blade

ER-GC71:WER9615

ER-GC63/53:WER9605

Oil

WES003

Blade life

Blade life varies according to the frequency and period

of use of the clipper.

For example, the blade life is approximately 2 years

when using the clipper for 20 minutes twice a month.

Replace the blades if cutting efﬁciency reduces

substantially despite proper maintenance.

Battery life

Battery life will vary according to the frequency and

length of use. If the battery is charged once a month,

the service life will be approximately 3 years.

If the operating time is signiﬁcantly shorter even after a

full charge, the battery has reached the end of its life.

Remove the built-in rechargeable battery before

disposing of the clipper.

The battery is to be disposed of safely.

Please make sure that the battery is disposed of at an

ofﬁcially designated location if there is one.

18

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

18

2019/4/25

15:04:17

English

Removing the built-in rechargeable

battery

Action

Charge the clipper.

Or use with the AC operation.

(See pages 11 and 12.)

Charge the battery for

approximately 16 hours

continuously to rejuvenate it.

If few uses remain even after

charging, the battery has

reached the end of its life.

(Fluid may be leaking due to

degradation at the end of

battery life.)

Contact an authorized service

centre for repair.

Push the appliance plug into

the main body all the way and

make sure the charge indicator

lamp ( ) glows.

Charge within the

recommended charging

temperature of 0 °C to 35 °C.

Have the battery replaced by

an authorized service centre.

Problem

Clipper stopped

functioning.

Operating time

is short.

The clipper cannot

be charged.

Clipper can be

used for only about

10 minutes even

after charging.

This ﬁgure must only be used when disposing of the

clipper, and must not be used to repair it. If you

dismantle the clipper yourself, it will no longer be

waterproof, which may cause it to malfunction.

• Remove the clipper from the AC adaptor.

• Slide the power switch to turn on the power and then

keep the power on until the battery is completely

discharged.

•

Perform steps 1 to and lift the battery, and then

remove it.

• Take care not to short-circuit the positive and negative

terminals of the removed battery, and insulate the

terminals by applying tape to them.

Specifications

This product is intended for household use only.

19

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

19

2019/4/25 15:04:18

English

Power source

See the name plate on the AC

adaptor.

(Automatic voltage conversion)

Motor voltage

1.2 V

Charging time

Approx. 8 hours

Airborne

Acoustical Noise

60 (dB (A) re 1 pW)

For environmental protection and recycling of

materials

This clipper contains a Nickel-Metal Hydride battery.

Please make sure that the battery is disposed of at an

ofﬁcially assigned location, if there is one in your

country.

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical and

electronic products and batteries must not

be mixed with general household waste.

For proper treatment, recovery and

recycling of old products and used

batteries, please take them to applicable

collection points in accordance with your

national legislation.

By disposing of them correctly, you will

help to save valuable resources and

prevent any potential negative effects on

human health and the environment.

For more information about collection and

recycling, please contact your local

authority.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol

(bottom symbol)

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

20

PB017706 - ER-GC63 53

��

_(01GB)_04-25-19.indd

20

2019/4/25 15:04:19

English

La pagina sta caricando ...

Panasonic ER-GC71 AC Rechargeable Hair Clipper Manuale utente

Panasonic ER-GC71 AC Rechargeable Hair Clipper Manuale utente

in altre lingue

Documenti correlati

Altri documenti