Canon Vixia HF-G60 Manuale utente

4K Camcorder

PUB. DIE-0535-000

Instruction Manual

NTSC

2

Introduction

Highlights of the Camcorder

The Canon VIXIA HF G60 4K Camcorder is a high-performance camcorder whose compact size makes it ideal

in a variety of situations. The following are just some of the many functions featured in the camcorder.

4K Recording

Advanced sensor and image processor

At the heart of the camcorder is the 1.0 in. single

plate CMOS sensor with an 8,290,000 effective pixel

count, and the DIGIC DV 6 imaging platform.

Thanks to its advanced high-sensitivity and noise

reduction technology, the camcorder can shoot

nuanced images with little noise even in low-light

situations.

Wide zoom lens

The camcorder features a 15x optical zoom lens

with a focal length at full wide angle of 25.5 mm*

(35 mm equivalent), offering superb wide-angle

shooting capability.

* Except when using Dynamic IS.

Convenience and Functionality

Emphasis on versatility

This camcorder has features to make it usable as a

main camera but is also small enough to be very

portable. The advanced image stabilization (A 53)

will let you shoot in a variety of situations in the field.

Manual controls at your fingertips

The focus/zoom ring helps you achieve the focus

you are looking for. You can easily change the ring's

functionality so that you can operate the zoom. You

can also assign certain frequently used functions to

a customizable button and adjust those functions

with the accompanying dial (A 83). Additionally,

the camcorder also features 5 assignable buttons

on the camcorder and one onscreen assignable

touch button to which you can assign a variety of

functions to access them with ease (A 84).

SD card recording options

The camcorder can record 4K video in MP4 format

on an SD card. It is equipped with 2 SD card slots,

allowing you to use dual recording to record the

same clip on two SD cards, or relay recording to

automatically switch to the other SD card when the

one being used is full (A 33).

Time code options (A 66)

The time code generated by the camcorder can be

output from the HDMI OUT terminal in order to

synchronize it with other external devices. A user bit

code (A 68) can also be output with the output

signal.

Dual Pixel CMOS AF

The camcorder features Dual Pixel CMOS AF

technology for improved autofocus functions

(A 42). In addition to continuous AF, AF-boosted

MF lets you focus manually most of the way and let

the camcorder finish focusing automatically. With

AF-boosted MF the camcorder does not perform

unreliable focus adjustments, resulting in a more

stable focusing operation than with continuous AF.

The camcorder can also focus automatically on

people's faces and track moving subjects while

keeping them in focus (A 47). Furthermore, the

camcorder can be in manual focus but switch to

autofocus when a face is detected (face-only AF),

ensuring that important subjects are in focus

(A 48).

Dual Pixel Focus Guide (A 44)

The focus guide serves as a visual, intuitive guide

that you can use to check if the image is in focus

and the required adjustment, if it is not. This can be

very helpful to ensure you always get amazingly

sharp 4K video.

MP4 Join Tool

MP4 Join Tool (A 99) is a small application that lets

you join MP4 clips that were split into multiple files.

Creativity and Artistic Expression

Special recording modes

When you make recordings, you can change the

recording frame rate to achieve a fast or slow motion

effect (A 41). Alternatively, you can use pre-

recording to record 3 seconds before you press the

button, helping you capture those hard-to-catch

opportunities (A 78).

Looks (

A 65)

You can adjust various aspects of the picture, such

as the color depth, sharpness and brightness, to

create a desired "look". If you prefer, you can use

one of the preset looks offered. The [ Neutral]

look for example produces a more natural perceived

resolution, while the [ Wide DR] look applies a

gamma curve with a very wide dynamic range and

an appropriate color matrix.

3

Other Features

• Battery packs compatible with Intelligent System

for better remaining usage time information.

• Compatibility with the optional GP-E2 GPS

Receiver to geotag your recordings (A 80).

• Compatibility with the optional RC-V100 Remote

Controller when you need a professional level of

remote operation (A 79).

4

5

1. Introduction 7

About this Manual 7

Conventions Used in this Manual 7

Before Using the Camcorder 8

Supplied Accessories 9

Names of Parts 10

Camcorder 10

WL-D89 Wireless Controller 15

2. Preparations 17

Preparing the Power Supply 17

Attaching the Ferrite Core 17

Charging a Battery Pack 17

Preparing the Camcorder 20

Attaching the Lens Hood 20

Using the LCD Screen 21

Using the Viewfinder 21

Adjusting the Grip Belt and Using Straps 22

Wireless Controller 23

Basic Operation of the Camcorder 24

Turning the Camcorder On and Off 24

Changing the Camcorder's Operating Mode 25

Date, Time and Language Settings 26

Setting the Date and Time 26

Changing the Language 27

Changing the Time Zone 27

Using the Menus 28

Setup Menus 28

FUNC Menu 29

Using SD Cards 31

Compatible SD Cards 31

Inserting and Removing an SD Card 32

Initializing an SD Card 32

Selecting the SD Card for Recordings 33

Dual Recording and Relay Recording 33

Recovering Clips 34

3. Recording 35

Recording Video and Photos 35

Recording 35

Reviewing the Latest Clip Recorded 37

Onscreen Displays 37

Video Configuration: Resolution, Bit Rate and

Frame Rate 40

Selecting the Resolution and Bit Rate 40

Selecting the Frame Rate 40

Slow & Fast Motion Recording 41

Adjusting the Focus 42

Manual Focus 42

AF-Boosted MF 45

Continuous AF 46

Changing the AF Frame Size 46

Face Detection & Tracking 47

Zooming 49

Using the Focus/Zoom Ring 49

Using the Grip Zoom Rocker 49

Using the Supplied Wireless Controller or an

Optional Remote Controller 51

Using the Touch Screen’s Zoom Controls 51

Digital Tele-Converter 52

Image Stabilization 53

Dynamic IS or Standard IS 53

Powered IS 53

Automatic Gain Control (AGC) Limit 54

Shooting Modes 55

Special Scene Modes 55

Adjusting the Exposure 57

Manual Exposure (n)57

Automatic Exposure: Programmed AE (’)58

Automatic Exposure: Shutter Priority (‚)58

Automatic Exposure: Aperture Priority (“)58

Touch Exposure 59

Exposure Lock (AE Lock) 59

Exposure Compensation 60

Backlight Correction 60

Zebra Pattern 61

ND Filter 62

White Balance 63

Using Looks 65

Setting the Time Code 66

Selecting the Time Code Mode 66

Selecting Drop Frame or Non-Drop Frame 67

Setting the User Bit 68

Using the Mini Advanced Shoe 69

Table of Contents

6

Recording Audio 70

Connecting an External Microphone to the

Camcorder 70

Audio Scenes 70

Adjusting the Audio Recording Level 72

Advanced Audio Input Settings 72

Using Headphones 76

Color Bars/Audio Reference Signal 77

Color Bars 77

Audio Reference Signal 77

Pre-Recording 78

Using the Optional RC-V100 Remote

Controller 79

Using the Optional GP-E2 GPS Receiver 80

4. Customization 83

CUSTOM Dial and Button 83

Assignable Buttons 84

Assignable functions 85

Saving and Loading Menu Settings 86

Saving Menu Settings 86

Loading Menu Settings 86

5. Playback 87

Playback 87

The Playback Index Screen 87

Changing the Index Screen 87

Playing Back Recordings 88

Playback Controls 89

Adjusting the Volume 89

Displaying Clip Information 90

Clip and Photo Operations 91

Deleting Clips and Photos 91

Trimming Clips 92

Copying Clips and Photos 93

6. External Connections 95

Video Output Configuration 95

Video Output Configuration (Recording) 95

Video Output Configuration (Playback) 96

Connecting to an External Monitor 97

Connection Diagram 97

Using the HDMI OUT Terminal 97

Selecting the Video Output’s Scan Mode 98

7. Saving Clips 99

Working with Clips on a Computer 99

8. Additional Information 101

Menu Options 101

FUNC menu in mode 101

FUNC menu in mode 102

Setup Menus 102

Troubleshooting 108

List of Messages 111

Safety Instructions and Handling Precautions 113

Maintenance/Others 117

Optional Accessories 118

Specifications 120

Reference Tables 123

Approximate Recording Time on an SD Card 123

Charging Times 123

Approximate Usage Times with a Fully Charged

Battery Pack 123

Index 124

1

7

Introduction

About this Manual

Thank you for purchasing the Canon VIXIA HF G60. Please read this manual carefully before you use the

camcorder and retain it for future reference. Should the camcorder fail to operate correctly, refer to

Troubleshooting (A 108).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

• A: Reference page number within this manual.

• The following terms are used in this manual:

“Screen” refers to the LCD screen and the viewfinder screen.

“Card” refers to an SD, SDHC or SDXC card.

“Clip” refers to a single movie unit recorded with a single recording operation (for example, from the point when

the REC button is pressed to start recording until it is pressed again to stop).

• Photographs in the manual are simulated pictures taken with a still camera.

• Some screenshots in this manual have been simplified to make them easier to read.

• Operating mode icons: A shaded icon (like ) indicates that the function described can be used in the

operating mode shown; a non-shaded icon (like ) indicates that the function cannot be used.

Operating modes:

Position of the power switch: shooting (CAMERA) or playback (MEDIA) mode.

For details, refer to Turning the Camcorder On and Off (A 24).

Position of the mode switch. For details refer to Changing the Camcorder's

Operating Mode (A 25).

About this Manual

8

• The following style is used to represent menu selections. For a detailed explanation on how to use the menus,

refer to Using the Menus (A 28). For a summary of all available menu options and settings, refer to Menu

Options (A 101).

Before Using the Camcorder

• Before making important recordings for the first time, make test recordings using the video configuration(s) you

plan to use to check that the camcorder operates correctly. Should the camcorder fail to operate correctly,

refer to Troubleshooting (A 108).

• Copyright notice: Unauthorized recording of copyrighted materials may infringe on the rights of copyright

owners and be contrary to copyright laws.

• About the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing

techniques, with more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or

light up permanently. This has no effect on the recorded image and does not constitute a malfunction.

IMPORTANT

• Observe the following precautions while the ACCESS indicator (A 12) is illuminated or flashing in red. Failing

to do so may result in permanent data loss.

- Do not disconnect the power source or turn off the camcorder.

- Do not open the card compartment cover.

- Do not change the camcorder’s operating mode.

- When a USB cable is connected to the camcorder, do not disconnect the USB cable.

This indicates to press

the MENU button.

Brackets [ ] indicate text as it appears on the

camcorder's screen (menu options, onscreen

buttons, messages, etc.).

This arrow indicates a deeper

level in the menu hierarchy or

the next step in a procedure.

1 Select [Initialize] for the desired SD card.

> [3 " Recording Setup] > [Initialize 8] > [6 Mem. Card A]

2 Select [Yes].

The menu page number is given

only for main procedures.

9

Supplied Accessories

The following accessories are supplied with the camcorder:

CA-570 Compact Power Adapter

(incl. power cord)

Ferrite Core BP-820 Battery Pack Lens hood with lens barrier

Lens cap WL-D89 Wireless Controller

(incl. CR2025 lithium button

battery)

Quick Guide

Names of Parts

10

Names of Parts

Camcorder

1 ND FILTER +/– buttons (A 62)

2 PRE REC (pre-recording) button (A 78)/

Assignable button 3 (A 84)

3 u (review recording) button (A 37)/

Assignable button 4 (A 84)

4 Lens barrier switch (A 35)

5Lens hood (A 20)

6 Focus/Zoom ring (A 42, 49)

7 CUSTOM (customizable) dial (A 83)

8 CUSTOM (customizable) button (A 83)

9 Focus/Zoom ring switch (A 42, 49)

10 DISP (onscreen display) button (A 37)/

BATT. INFO (battery information) button (A 19)

1

78 9 10

23

45 6

11

Names of Parts

1DC IN terminal (A 17)

2 REMOTE terminal

For connecting the optional RC-V100 Remote

Controller (A 79) or commercially available

remote controllers.

3 Built-in speaker (A 89)

4 Lens hood release button (A 20)

5 Grip belt (A 22)

6USB terminal (A 80)

7 HDMI OUT terminal (A 97)

8 × (headphones) terminal (A 76)

9MIC terminal (A 70)

2

7

3

1

5

6

8

9

4

Names of Parts

12

1 Joystick/SET button (A 28)

2 MENU button (A 28)

3 Remote sensor (A 23)

4 AF/MF button (A 42)/

Assignable button 1 (A 84)

5 POWERED IS button (A 53)/

Assignable button 2 (A 84)

6 LCD touch screen (A 21)

7 Serial number

8 Viewfinder (A 21)

9 ACCESS (card access) indicator (A 8, 35)

10 Dioptric adjustment lever (A 21)

11 MAGN. (magnification) button (A 45)/

Assignable button 5 (A 84)

12 Strap mount (A 22)

13 REC (start/stop recording video) button (A 35)

14 Battery attachment unit (A 17)

1

8

9

10

11

12

13

14

2

3

4

5

6

7

13

Names of Parts

1 Mini advanced shoe (A 69)

2 POWER/CHG (battery charging) indicator

(A 17)

3 Power switch (A 24)

4 Cold shoe

5 Built-in stereo microphone (A 70)

6Grip zoom rocker (A 49)

7 Mode switch (A 25)

8 Card compartment cover (A 32)

9 SD card slot 2

10 SD card slot 3

11 SD CARD (open the card compartment cover)

switch (A 32)

687

21345

910

11

Names of Parts

14

1 Socket for tripod's anti-rotation pin

2 Tripod socket

For use with tripods with a mounting screw up to 6 mm (0.24 in.) long

3 BATTERY RELEASE switch (A 18)

4Eye cup (A 21)

134

2

15

Names of Parts

WL-D89 Wireless Controller

1 START/STOP button (A 35)

Same as the REC button on the camcorder,

used to start/stop recording video.

2 G (open the index selection screen) button

(A 87)

3 MENU button (A 28)

4 DISP. (onscreen display) button (A 37)

5 SET button (A 28)

6

Ñ (stop) button (A 88)

7 PHOTO button (A 36)

8 Zoom buttons (A 51)

9 Navigation buttons (Í/Î/Ï/Ð)

10 Ò (play/pause) button (A 88)

1

7

8

9

10

2

3

4

5

6

Names of Parts

16

2

17

Preparations

Preparing the Power Supply

You can power the camcorder using a battery pack or directly using the supplied compact power adapter. If you

connect the compact power adapter to the camcorder while a battery pack is attached, the camcorder will draw

power from the power outlet.

Attaching the Ferrite Core

Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder. Attaching the

ferrite core to the compact power adapter cable is necessary to suppress RF interference.

1 Attach the ferrite core to the cable about 6 cm (2.4 in.) from the DC plug

(the plug to be connected to the DC IN terminal).

2Pass the cable through the center of the core and wrap it around the core

(as shown in the illustration), then close the unit until it clicks shut.

Charging a Battery Pack

You can power the camcorder using the supplied BP-820 Battery Pack or the optional BP-828 Battery Pack.

Both battery packs are compatible with Intelligent System so you can check the approximate remaining battery

usage time (in minutes) on the screen. For more accurate readings, when using a battery pack for the first time,

charge it fully and then use the camcorder until the battery pack is completely depleted.

1 Connect the compact power adapter to the camcorder and plug the power cord into a power outlet.

2 Attach the battery pack to the camcorder.

Preparing the Power Supply

18

3 Charging will start when the camcorder is turned off.

• The POWER/CHG (charge) indicator will illuminate in red while the battery is charging. If the POWER/CHG

indicator starts flashing, refer to Troubleshooting (A 109).

4 When the POWER/CHG indicator goes out, the battery is fully charged.

• Disconnect the compact power adapter from the camcorder and unplug the power cord.

To remove the battery pack

1 Slide the BATTERY RELEASE switch in the direction of the arrow

and hold it pressed down.

2 Slide the battery pack down and then pull it out.

IMPORTANT

• Do not connect to the compact power adapter any product that is not expressly recommended for use with

this camcorder.

• Turn off the camcorder before connecting or disconnecting the compact power adapter. After you turn off the

camcorder, important data is updated on the SD card. Be sure to wait until the green POWER/CHG indicator

goes out.

• When using the compact power adapter, do not fix it permanently to one place as this may cause a

malfunction.

• To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power

adapter to voltage converters for overseas travels or special power sources such as those on aircraft and

ships, DC-AC inverters, etc.

NOTES

• We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and 86 °F). If

either the ambient temperature or the battery pack’s temperature is outside the range of approx. 0 °C to 40 °C

(32 °F to 104 °F), charging will not start.

• The battery pack will be charged only when the camcorder is off.

• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG indicator

has gone out before restoring the power supply.

Illuminated in red while

the battery is charging

햲

햳

19

Preparing the Power Supply

• If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the

battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day

before, to ensure a full charge.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

• For handling precautions regarding the battery pack, refer to Safety Instructions and Handling Precautions

(A 113). For charging times and approximate usage times, refer to Reference Tables (A 123).

Checking the Remaining Battery Charge

With the camcorder turned off, press the BATT. INFO button to

display for about 5 seconds a screen showing the approximate

battery charge level. Note that if the battery charge is too low,

the battery information screen may not appear.

Preparing the Camcorder

20

Preparing the Camcorder

This section covers basic preparations for the camcorder such as attaching the lens hood, adjusting the

viewfinder and LCD screen, and adjusting the grip belt.

IMPORTANT

• Be careful not to drop the camcorder when attaching, removing or adjusting the various accessories. Using a

table or other stable surface is recommended.

Attaching the Lens Hood

While recording, the supplied lens hood with lens barrier is

effective for reducing stray light that can be the cause of lens

flare and ghost images. Additionally, closing the lens barrier

can help prevent fingerprints and dirt accumulation on the

lens.

1 Remove the lens cap.

2 Align the groove on the lens hood with the index

mark on the top of the lens (

햲), and then turn the

lens hood clockwise until it stops with a click

(햳).

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the thread.

To remove the l e n s hood

1Press and hold the lens hood release button and turn

the lens hood counterclockwise.

2 Place the lens cap back on the lens.

NOTES

About the lens cap:

• Use the supplied lens cap when carrying the camcorder or storing it after use.

• The lens cap and lens hood cannot be used simultaneously. To attach the lens hood, remove the lens cap in

advance.

햲

햳

Lens hood release

button

La pagina sta caricando ...

Canon Vixia HF-G60 Manuale utente

Canon Vixia HF-G60 Manuale utente

in altre lingue

Documenti correlati

Altri documenti