Canon LEGRIA HF G50 Manuale utente

PUB.DIE-0529-000

4K Camcorder

Instruction Manual

2

COPYRIGHT WARNING

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright

laws.

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

• macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

Administrator, Inc. in the United States and other countries.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels

(scanning lines).

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4

compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-

commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is

granted or implied for any other use for MPEG-4 standard.

3

Highlights of the Camcorder

The Canon LEGRIA HF G50 4K Camcorder is a high-performance camcorder whose compact size

makes it ideal in a variety of situations. The following are just some of the many functions featured in

the camcorder.

4K Recording

CMOS sensor and DIGIC DV 6 image

processor

The camcorder is equipped with a

1/2.3-type CMOS sensor that captures video

at an effective pixel count of approximately

8.29 megapixels (3840x2160). The video is

then processed by the DIGIC DV 6 image

processor. In addition to recording 4K video,

the camcorder employs oversampling to

record Full HD video.

Wide zoom lens and 8-bladed aperture

The zoom lens is equipped with 20x optical

zoom and has a focal length at full wide angle

of 29.3 mm* (35 mm equivalent), making the

camcorder versatile in a variety of shooting

situations. The 8-bladed aperture delivers a

pleasing out-of-focus blur (“bokeh”) to your

recordings.

* When the resolution is 3840x2160 and the

image stabilization is a setting other than

Dynamic IS. The focal length is 30.6 mm

when using Dynamic IS.

4K recording at 25.00P and HD

recording at 50.00P

The camcorder can record clips in MP4 format

at 3840x2160 with a frame rate of 25.00P or

1920x1080 with a frame rate of 50.00P, giving

you the freedom to choose the video

configuration that is most suitable for your

project.

Convenience and Functionality

Recording for extended periods

With its two SD card slots, the camcorder

allows you to use dual recording (A 30) to

record the same clip on two SD cards, or relay

recording to automatically switch to the other

SD card when the one being used becomes

full. Dual recording is a convenient way to

create a backup of your recordings while relay

recording effectively extends the available

recording time.

Emphasis on versatility

This camcorder has features to make it usable

as a main camera but is also small enough to

be very portable. The advanced image

stabilization (A 60), which stabilizes the

image along 5 axes, will let you shoot in a

variety of situations in the field. The LCD touch

panel and viewfinder can be angled in a variety

of positions, allowing for shooting in tight

places, for example.

Manual controls at your fingertips

The focus/zoom ring helps you achieve the

focus you are looking for. You can easily

change the ring's functionality so that you can

operate the zoom. You can also assign certain

frequently used functions to a customizable

button and adjust those functions with the

accompanying dial (A 79). Additionally, the

camcorder also features 5 assignable buttons

on the camcorder and one onscreen

assignable touch button to which you can

assign a variety of functions to access them

with ease (A 80).

Face detection & tracking (A 58)

After detecting a subject's face, the camcorder

can focus on it and even track it. Furthermore,

the camcorder can be in manual focus but

switch to autofocus when a face is detected,

ensuring that important subjects are in focus.

4

Creativity and Artistic Expression

Special recording modes (A 36, 74)

When you make recordings, you can change

the recording frame rate to achieve a fast or

slow motion effect. Alternatively, you can use

pre-recording to record 3 seconds before you

decide to start recording, helping you capture

those hard-to-catch opportunities.

Looks (A 49)

You can adjust various aspects of the picture,

such as the color depth, sharpness and

brightness, to create a desired “look”.

Other Features

• Battery packs compatible with Intelligent

System give you an estimate (in minutes) of

the remaining recording time.

• Compatibility with the optional GP-E2 GPS

Receiver to geotag your recordings (A 77).

• Compatibility with the optional RC-V100

Remote Controller (A 76) when you need a

professional level of remote control.

5

1 Introduction 7

About this Manual 7

Conventions Used in this Manual 7

Supplied Accessories 9

Names of Parts 10

2 Preparations 14

Attaching the Ferrite Core 14

Charging the Battery Pack 14

Preparing the Camcorder 17

Using the Lens Hood 17

Adjusting the LCD Screen 18

Using the Viewfinder 19

Grip Belt and Straps 19

Basic Operation of the Camcorder 21

Turning the Camcorder On and Off 21

Setting the Camera Mode 22

Using the MENU Button and

Joystick 22

First Time Settings 23

Setting the Date and Time 23

Changing the Language 24

Changing the Time Zone 24

Using the Menus 25

Setup Menus 25

FUNC Menu 26

Using SD Cards 28

Compatible SD Cards 28

Inserting and Removing an SD Card 29

Initializing an SD Card 30

Selecting the SD Card for

Recordings 30

Dual Recording and Relay Recording 30

Recovering Clips 31

3 Recording 32

Recording Clips and Photos 32

Basic Recording 32

Reviewing the Latest Clip Recorded 34

Video Configuration: Resolution, Bit Rate

and Frame Rate 35

Selecting the Resolution and Bit

Rate 35

Selecting the Frame Rate 35

Slow & Fast Motion Recording 36

Shooting Modes 37

Special Scene Modes 38

Exposure Adjustment 40

Manual Exposure (n)40

Automatic Exposure 41

Touch Exposure 42

Exposure Lock (AE Lock) 43

Exposure Compensation 43

ND Filter 44

Using the Zebra Pattern 44

Backlight Correction 45

Automatic Gain Control (AGC) Limit 46

White Balance 47

Using Looks 49

Zooming 50

Using the Focus/Zoom Ring 50

Using the Zoom Rocker 51

Using the Touch Screen’s Zoom

Controls 52

Using an Optional Remote Controller 52

Soft Zoom Control 53

Digital Tele-Converter 53

Focus Adjustment 54

Manual Focus 54

Autofocus 57

Face Detection & Tracking 58

Image Stabilization 60

Dynamic IS or Standard IS 60

Setting the Time Code 61

Selecting the Time Code Mode 61

Setting the User Bit 63

Using the Mini Advanced Shoe 64

Recording Audio 65

Using an External Microphone 65

Audio Scenes 66

Audio Recording Level (Built-in

Microphone/MIC Terminal) 67

Microphone Attenuator (Built-in

Microphone or External

Microphone) 68

Low-Cut Filter (MIC Terminal) 68

Wind Screen (Built-in Microphone) 69

Microphone Directionality (Built-in

Microphone) 69

Audio Equalizer (Built-in Microphone) 70

Table of contents

6

Audio Limiter 70

Audio Compressor 71

Using Headphones 72

Color Bars/Audio Reference Signal 73

Recording Color Bars 73

Recording an Audio Reference

Signal 73

Pre-Recording 74

Onscreen Displays 75

Using the Optional RC-V100 Remote

Controller 76

Using the GP-E2 GPS Receiver 77

Connecting the GPS Receiver 77

4 Customization 79

CUSTOM Dial and Button 79

Assignable Buttons 80

Saving and Loading Menu Settings 82

Saving Camcorder Settings 82

Loading Camcorder Settings 82

5 Playback 83

Basic Playback 83

Playback Controls 85

Adjusting the Volume 86

Displaying Clip Information 86

Clip and Photo Operations 87

Deleting Clips and Photos 87

Trimming Clips 88

6 External Connections 89

Video Output Configuration 89

Connecting to an External Monitor 91

Connection Diagram 91

Using the HDMI OUT Terminal 91

7 Saving Clips 93

Working with Clips on a Computer 93

Copying Clips and Photos Between SD

Cards 94

8 Additional Information 95

Menu Options 95

FUNC Menu 95

Setup Menus 96

Appendix: Onscreen Icons and

Displays 104

Troubleshooting 108

List of Messages 112

Safety Instructions and Handling

Precautions 114

Camcorder 115

Battery Pack 116

SD Card 116

Built-in Rechargeable Lithium

Battery 117

Disposal 117

Maintenance/Others 118

Cleaning 118

Condensation 118

Viewing the Certification Logo 118

Using the Camcorder Abroad 119

Optional Accessories 120

Specifications 123

Reference Tables 126

Approximate recording times 126

Charging, Recording and Playback

Times 126

Index 127

About this Manual

7

Introduction

About this Manual

Thank you for purchasing the Canon LEGRIA HF G50. Please read this manual carefully before you

use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly,

refer to

Troubleshooting

(A 108).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

• A: Reference page number within this manual.

• The following terms are used in this manual:

“SD card” refers to an SD, SDHC or SDXC memory card.

“Screen” refers to the LCD screen and the viewfinder screen.

“Clip” refers to one movie unit from the point you press the START/STOP button to start recording

until you press again to pause the recording.

• The photos included in this manual are simulated pictures taken with a still camera.

• Some screenshots in this manual have been simplified to show only relevant icons.

IMPORTANT

• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so

may result in permanent data loss or damage to the memory.

- Do not disconnect the power source or turn off the camcorder.

- Do not open the SD card compartment cover.

- Do not change the camcorder’s camera mode.

- Do not set the camcorder to MEDIA mode.

- When a USB cable is connected to the camcorder, do not disconnect the USB cable.

1

Introduction

About this Manual

8

Brackets [ ] are used to

refer to onscreen buttons

and menu options you will

select and to other

onscreen messages and

displays.

These icons indicate the camcorder’s operating mode and whether a function is available in that

mode.

: Indicates whether the

camcorder is in shooting (CAMERA) or

playback (MEDIA) mode. In this example, the

function is available only in mode. For

details, refer to

Turning the Camcorder On

and Off

(A 21).

: Indicates the camera mode. For

details, refer to

Setting the Camera Mode

(A 22).

The > arrow is used to abbreviate menu

selections. For details on how to use the

menus, refer to

Using the Menus

(A 25).

For a summary of available menu options

and settings, refer to the appendix

Menu

Options

(A 95).

Supplied Accessories

9

Supplied Accessories

The following accessories are supplied with the camcorder:

CA-570 Compact Power Adapter

(incl. power cord)

Ferrite core BP-820 Battery Pack

Lens hood with lens barrier Lens cap Quick Guide

Names of Parts

10

Names of Parts

1 Lens barrier switch (A 32)

2SD card slot 2 (A 28)

3SD card slot 3 (A 28)

4 u (review recording) button (A 34)/

Assignable button 5 (A 80)

5 Lens hood (A 17)

6 Focus/Zoom ring (A 50, 54)

7 CUSTOM (customizable) dial (A 79)

8 CUSTOM (customizable) button

(A 79)

9 SD card compartment cover

10 DISP (onscreen display) button

(A 75)/BATT. INFO (battery

information) button (A 16)

4

108765

1

32

9

Left side view

Names of Parts

11

1 Built-in speaker (A 86)

2MIC terminal (A 65)

3 HDMI OUT terminal (A 91, 91)

4 REMOTE terminal (A 76)

For connecting commercially

available remote controllers.

5 × (headphones) terminal (A 72)

6USB terminal (A 77)

7DC IN terminal (A 14)

8 Grip belt (A 19)

25

6

3

4

87

1

Right side view

Names of Parts

12

1 Instant AF sensor (A 57, 118)

2 AF/MF button (A 54)/

Assignable button 1 (A 80)

3 PRE REC (pre-recording) button

(A 74)/

Assignable button 2 (A 80)

4 LCD touch screen (A 18)

5 Focus/Zoom ring switch (A 50, 54)

6Viewfinder (A 19)

7 Dioptric adjustment lever (A 19)

8 Joystick/SET button (A 22)

9 Strap mount (A 19)

10 Assignable button 3 (A 80)

11 Assignable button 4 (A 80)

12 Battery attachment unit (A 14)

13 START/STOP button (A 32)

14 MENU button (A 25)

15 Serial number

1

45

6

7

8

9

14

15

13121110

3

2

Front view

Back view

Names of Parts

13

1 Power switch (A 21)

2 POWER / CHG (battery charging)

indicator (A 14)

3 Built-in stereo microphone

(A 65)

4 Accessory shoe

5 Camera mode switch (A 22)

6 Grip zoom rocker (A 51)

7 ACCESS indicator (A 32)

8 Mini advanced shoe (A 64)

9 Lens hood mount index mark

10 Tripod socket

For mounting the camcorder on a

tripod with a mounting screw 6.5 mm

or shorter.

11 BATTERY RELEASE switch (A 15)

12 Eye cup (A 19)

3

4

5

6

7

8

1

2

9

10

11

12

Top view Bottom view

Attaching the Ferrite Core

14

Preparations

Attaching the Ferrite Core

Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder.

Attach the ferrite core to the cable about 6 cm from the DC plug

(the plug to be connected to the DC IN terminal).

Pass the cable through the center of the core and wrap it around the

core (as shown in the illustration), then close the unit until it clicks shut.

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the supplied CA-570 Compact

Power Adapter.

1 Connect the compact power adapter to the

camcorder and plug the power cord into a power

outlet.

2 Attach the battery pack to the camcorder.

• Press the battery pack softly into the battery attachment

unit and slide it forward until it clicks in place.

DC IN terminal

2

Preparations

Charging the Battery Pack

15

3 Charging will start when the camcorder is turned off.

• If the camcorder was on, the green POWER/CHG indicator

will go out when you turn off the camcorder. After a

moment, the POWER/CHG indicator will turn on in red

(battery pack charging). The red POWER/CHG indicator will

go out when the battery pack is fully charged.

• If the indicator flashes, refer to

Troubleshooting

(A 110).

To remove the battery pack

1 Slide the BATTERY RELEASE switch in the direction of the

arrow and hold it pressed down (

햲).

2 Slide the battery pack and then pull it out (

햳).

IMPORTANT

• Turn off the camcorder before connecting or disconnecting the compact power adapter. After you

turn off the camcorder, important data is updated on the SD card. Be sure to wait until the green

POWER/CHG indicator goes out.

• When using the compact power adapter, do not fix it permanently to one place as this may cause a

malfunction.

• Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical

equipment that is not expressly recommended for use with this camcorder.

• To prevent equipment breakdowns and excessive heating, do not connect the supplied compact

power adapter to voltage converters for overseas travels or special power sources such as those on

aircraft and ships, DC-AC inverters, etc.

NOTES

• We recommend charging the battery pack in temperatures between 10 °C and 30 °C. If either the

ambient temperature or the battery pack’s temperature is outside the range of approx. 0 °C to

40 °C, charging will not start.

• The battery pack will be charged only when the camcorder is off.

• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG

indicator has gone out before restoring the power supply.

POWER/CHG (battery charging) indicator

BATTERY

RELEASE

switch

Charging the Battery Pack

16

• If remaining battery time is an issue, you can power the camcorder using the compact power

adapter so the battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or

the day before, to ensure a full charge.

• The first time you use a battery pack, fully charge it and then use the camcorder until the battery

pack is completely depleted. Doing so will ensure that the remaining recording time will be displayed

accurately.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might

need.

• For handling precautions regarding the battery pack, refer to

Safety Instructions and Handling

Precautions

(A 114).

• For charging times and approximate usage times, refer to

Reference Tables

(A 126).

Checking the Remaining Battery Charge

With the camcorder turned off, press the BATT. INFO button to display for about 5 seconds a screen

showing the approximate battery charge level. Note that if the battery charge is too low, the battery

information screen may not appear.

Preparing the Camcorder

17

Preparing the Camcorder

This section covers the basic preparations for the camcorder such as attaching the lens hood,

adjusting the grip belt and adjusting the viewfinder and LCD screen.

IMPORTANT

• Be careful not to drop the camcorder when attaching, removing or adjusting the various

accessories. Using a table or other stable surface is recommended.

Using the Lens Hood

While recording, the supplied lens hood with lens barrier is

effective for reducing stray light that can be the cause of lens

flare and ghost images. Additionally, closing the lens barrier

can help prevent fingerprints and dirt accumulation on the

lens.

1 Remove the lens cap.

2 Align the mark on the lens hood with the lens hood

mount index mark on the bottom of the camcorder

(

햲), and then turn the lens hood clockwise until it

stops with a click

(햳).

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the thread.

• To remove the lens hood, turn it counterclockwise.

NOTES

About the lens cap:

• Use the supplied lens cap when carrying the camcorder or storing it after use.

• Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously.

Preparing the Camcorder

18

Adjusting the LCD Screen

Open the LCD panel 90 degrees.

• You can rotate the panel downward or toward the lens.

• Rotating the LCD toward the lens can be useful to allow the subject to monitor the LCD screen while

you use the viewfinder.

NOTES

• You can adjust the brightness of the LCD screen with the > [£ Display Setup] > [LCD

Brightness] or [LCD Backlight] setting. Also, you can hold the DISP button pressed down for more

than 2 seconds to change the [LCD Backlight] setting between bright and normal or from dim to

normal.

• Adjusting the brightness does not affect the brightness of recordings.

• Using a brighter setting will shorten the effective usage time of the battery pack.

• When the LCD panel is turned 180 degrees toward the subject, you can use the >

[£ Display Setup] > [LCD Mirror Image] setting to reverse the screen’s image horizontally,

showing a mirror image of the subject.

• For details about how to take care of the LCD screen, refer to

Handling Precautions

(A 115),

Cleaning

(A 118).

• About the LCD and viewfinder screens: The screens are produced using extremely high-precision

manufacturing techniques, with more than 99.99% of the pixels operating to specification. Very

rarely, pixels may misfire or may light up permanently as white dots. This has no effect on the

recorded image and does not constitute a malfunction.

Subject can monitor the LCD screen

Preparing the Camcorder

19

Using the Viewfinder

If it is difficult to use the LCD screen, you can use the viewfinder, which can be tilted 45 degrees

upward.

1 Use the power switch to turn on the camcorder.

(A 21).

2 Close the LCD panel (

햲).

3 Pull out the viewfinder and adjust the viewing angle

(

햳).

4 Adjust the viewfinder using the dioptric adjustment

lever (

햴).

NOTES

• You can adjust the brightness of the viewfinder with the > [£ Display Setup] >

[Viewfinder Backlight] setting.

• Adjusting the brightness does not affect the brightness of recordings.

• Using a brighter setting will shorten the effective usage time of the battery pack.

• You cannot use the LCD screen and viewfinder simultaneously.

• Make sure you keep the eye cup attached when using the

camcorder.

If you wear glasses, you may find the viewfinder easier to

use if you flip back the outer edge of the eye cup toward the

camcorder body.

• For details about how to take care of the viewfinder, refer to

Handling Precautions

(A 115),

Cleaning

(A 118).

Grip Belt and Straps

Fasten the grip belt.

• Adjust the grip belt so that you can reach the grip zoom

rocker with your index finger, and the START/STOP button

with your thumb.

햲

햴

햳

Dioptric

adjustment

lever

Preparing the Camcorder

20

Attaching an optional wrist strap

Attach the wrist strap to the strap mount on the grip belt,

adjust the length and fasten.

• You can use both for extra convenience and protection.

Attaching an optional shoulder strap

Pass the ends of the shoulder strap

through the strap mount on the grip belt

and adjust the length of the strap.

La pagina si sta caricando...

Canon LEGRIA HF G50 Manuale utente

Canon LEGRIA HF G50 Manuale utente

in altre lingue

Documenti correlati

Altri documenti