Asus Q670EI-IM-A Manuale utente

Industrial Motherboard

Q670EI-IM-A

ii

E22555

Revised Edition V3

August 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

iii

Contents

Chapter 1 Product overview

1.1 Package contents ......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications ............................................................................... 1-2

Chapter 2 Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Central Processing Unit (CPU) ................................................... 2-4

2.3.1 CPU installation .............................................................. 2-5

2.3.2 CPU heatsink and fan assembly installation ................... 2-7

2.4 System memory ........................................................................... 2-9

2.5 Jumpers ...................................................................................... 2-10

2.6 Connectors ................................................................................. 2-14

2.6.1 Rear panel connectors .................................................. 2-14

2.6.2 Internal connectors ....................................................... 2-16

2.7 Slot .............................................................................................. 2-25

Chapter 3 BIOS setup

3.1 BIOS Setup program .................................................................... 3-1

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-2

3.3.1 LVDS Configuration ........................................................ 3-2

3.3.2 PCH-FW Configuration ................................................... 3-4

3.3.3 Trusted Computing ......................................................... 3-4

3.3.4 CPU Configuration .......................................................... 3-5

3.3.5 Graphics Configuration ................................................... 3-6

3.3.6 Power Management ....................................................... 3-6

3.3.7 PCI Express Configuration .............................................. 3-7

3.3.8 AMT Configuration .......................................................... 3-7

3.3.9 Super IO Configuration ................................................... 3-8

3.3.10 Serial Console Redirection ............................................. 3-9

3.3.11 SATA Configuration ...................................................... 3-11

3.3.12 VMD setup menu .......................................................... 3-11

iv

3.3.13 Network Stack Configuration ........................................ 3-11

3.3.14 USB Configuration ........................................................ 3-12

3.3.15 NVMe Configuration ...................................................... 3-13

3.3.16 Onboard Devices Configuration .................................... 3-13

3.3.17 Miscellaneous ............................................................... 3-13

3.3.18 APM Configuration ........................................................ 3-14

3.3.19 EZ-Flash ....................................................................... 3-15

3.3.20 Watchdog Timer ............................................................ 3-15

3.4 Hardware Monitor menu ............................................................ 3-15

3.4.1 Smart Fan Mode ........................................................... 3-16

3.4.2 Smart Fan Function ...................................................... 3-16

3.5 Security menu ............................................................................ 3-16

3.5.1 Administrator Password ................................................ 3-16

3.5.2 User Password .............................................................. 3-16

3.5.3 Secure Boot .................................................................. 3-17

3.6 Boot menu .................................................................................. 3-17

3.7 Exit menu .................................................................................... 3-18

Appendix

Notices .......................................................................................................A-1

Service and Support .................................................................................A-5

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x ASUS Q670EI-IM-A Motherboard

1 x Serial ATA 6.0 Gb/s cable

1 x M.2 screw package

1 x ASUS I/O Shield

NOTE: If any of the above items is damaged or missing, contact your

distributor or sales representative immediately.

1.2 Features

• Intel® socket 1700 for 12th Gen Intel® Core™ i9/ i7/ i5/ i3, Pentium®, and

Celeron® processors

• Two Dual Channel DDR5 4800 MHz SO-DIMMs up to 64GB

• 4 x SATA 6.0 Gb/s, 3 x USB 3.2 Gen 2, 4 x USB 3.2 Gen 1, 6 x USB 2.0, 5 x

COM ports

• 1 x PCIe x16 slot, 1 x M.2 (Key E, 2230) for WiFi/BT devices, 1 x M.2 (Key M,

2242/2260/2280) with PCIe and SATA modes for SSD

• Multi-display: 3 x DisplayPorts, 1 x HDMI™, 1 x LVDS/eDP

Chapter 1

Product overview

Q670EI-IM-A

1-2

1.3 Specifications

(continued on the next page)

CPU

Intel® socket 1700 for 12th Gen Intel® Core™ i9/ i7/ i5/ i3,

Pentium®, and Celeron® processors

Supports up to 65W TDP

Chipset Intel® Q670E Chipset

Memory 2 x SO-DIMM, max. 64GB, DDR5 4800 MHz

Graphics

Integrated graphics processor - Intel® HD Graphics support

Multi-VGA output support: DP/HDMI™/eDP/LVDS ports

- Supports 3x DisplayPort 1.4 outputs with a maximum

resolution of 4k

- Supports HDMI™ output

- Supports either eDP or LVDS output (Switched by

BIOS)

Expansion slots

1 x PCI Express 5.0 x16 slot*

1 x M.2 socket 1 (Key E, 2230) with PCIe and CNVi modes

for WiFi/BT devices

1 x M.2 socket 3 (Key M, 2242/2260/2280) with PCIe and

SATA modes

* Supports PCIe bifurcation (16x to 8x+8x).

Storage

3 x SATA 6.0 Gb/s ports

1 x M.2 socket 3 (Key M, 2242/2260/2280) with PCIe and

SATA modes

LAN Dual Intel® Lan: 1 x Intel® I210AT (Co-lay I211AT), 1 x Intel®

I225LM (Intel vPro supported)

Audio Realtek ALC897 High Definition Audio CODEC

Rear panel I/O ports

1 x HDMI™ port

3 x DisplayPorts

3 x USB 3.2 Gen 2 ports (2 x Type-A + 1 x Type-C®)

1 x USB 3.2 Gen 1 port

4 x USB 2.0 ports

2 x LAN (RJ45) ports

1 x P/S2 keyboard port

1 x P/S2 mouse port

1 x COM port (RS232/422/485)

2 x Audio jacks

1-3

Chapter 1: General information

Internal I/O ports

4 x COM Port headers (1 x RS232/422/485, 3 x RS232)

1 x USB 3.2 Gen 1 connector supports additional 2 USB 3.2

Gen 1 ports

1 x USB 3.2 Gen 1 stick socket

1 x USB 2.0 header supports additional 2 USB 2.0 ports

1 x CPU Fan header with PWM mode

1 x Chassis Fan header with PWM mode

1 x Disable ME jumper

1 x LVDS/eDP selection connector

1 x Panel SW header

1 x Front Panel Audio header (AAFP)

1 x System Panel header

1 x S/PDIF header

1 x Chassis Intrude header

1 x Speaker header

1 x Clear CMOS header

1 x COM Debug header

1 x AT/ATX mode selection header

1 x 24-pin ATX Power connector

1 x 8-pin ATX Power connector

1 x SPI TPM header

GPIO 1 x 8-bit GPIO header

Manageability WfM 2.0, DMI 2.0, WOL by PME

Watch dog timer Yes

Power requirement ATX mode

12V DC-IN (Supported by an additional cable)

Operation Temperature 0~60°C

Non-Operation

Temperature -40~85°C

Relative Humidity 5%~95%

OS support

Windows® 10 (64-bit)

Windows® IoT Enterprise

Ubuntu

RedHat Enterprise

Fedora Workstation

OpenSUSE

Certification CE, FCC

Form Factor Mini-ITX Form Factor, 6.7”x 6.7” (17.0cm x 17.0cm)

NOTE: Specifications are subject to change without notice. Please refer to the

ASUS website for the latest specifications.

Q670EI-IM-A

1-4

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplug the power cord from the wall socket before touching any

component.

• Before handling components, use a grounded wrist strap or touch a safely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, always remove the AC power

by unplugging the power cord from the power outlet. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.

Q670EI-IM-A

2-2

Q670EI-IM-A

17.0cm(6.7in)

EATXPWR

DDR5 SO-DIMM_B1 (64bit, 260-pin module)

DDR5 SO-DIMM_A1 (64bit, 260-pin module)

M.2(SOCKET3)

PCIE SATA IRST

4.0 X4 V V

COM_DEBUG

COM1_SEL

VCC_PWR_SEL

BKLTEN_SEL

AT_ATX_SEL

CHASSIS

SPDIF_OUT

F_PANEL

SPEAKER

LCD_BLKT_PANEL

COM3

USB_213

COM4 COM5

COM2

SATA6G_3

SATA6G_4

SATA6G_2SATA6G_1

CLRTC

AAFP

BATTERY

AUDIO

Super

I/O

LAN1_U32G1_5

DP_12

LAN1_U32G2_45

U32G2_C1

U32G1_6

COM2_SEL

KBMS

128Mb

BIOS

LGA1700

LVDS_EDP

U32G1_78

Intel®

Q670E

Intel®

i210AT

Intel®

I225LM

ALC

897

PCIEX16(G5)

CPU_FAN

CHA_FAN

USB_9~12

DP3

HDMI

COM1

PANEL_SW

GPIO_CON

TPM

M.2(WIFI)

2280 2260 2242

EATX12V

DIS_ME

17

18

15

16

14

4

13

19

202122

25

26

27

28

24

23

15

8 9 1 11 121032 76

4

51

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION! Do not overtighten the screws! Doing so can damage the

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots Page

1. CPU and Chassis Fan headers (4-pin CPU_FAN, 4-pin CHA_FAN) 2-18

2. Display panel VCC power selection (6-pin VCC_PWR_SEL) 2-10

3. LVDS/eDP Backlight panel connector (5-pin LCD_BLKT_PANEL) 2-22

4. ATX Power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-24

5. Intel® LGA1700 CPU socket 2-4

6. Digital Audio header (4-1 pin SPDIF_OUT) 2-23

7. Chassis Intrude header (4-1 pin CHASSIS) 2-12

8. AT/ATX mode selection (3-pin AT_ATX_SEL) 2-11

9. Serial Port headers (10-1 pin COM2, COM3, COM4, COM5) 2-22

10. General purpose input/output connector (10-pin GPIO_CON) 2-17

11. Speaker header (4-pin SPEAKER) 2-20

12. System Panel header (10-1 pin F_PANEL) 2-19

13. COM1/2 Ring/+5V/+12V selection jumpers (6-pin COM1_SEL, COM2_SEL) 2-10

14. DDR5 SO-DIMM slots 2-9

15. USB 3.2 Gen 1 connectors (20-1 pin U32G1_78)/ (U32G1_6) 2-16

16. USB 2.0 header (10-1 pin USB_213) 2-17

17. SATA 6.0Gb/s ports (7-pin SATA6G_1-4) 2-20

18. Clear CMOS header (2-pin CLRTC) 2-13

19. PCI Express 5.0 x16 slot 2-25

20. Disable ME jumper (3-pin DIS_ME) 2-11

21. Front Panel Audio header (10-1 pin AAFP) 2-23

22. RTC Battery header (2-pin BATTERY) 2-21

23. M.2 Wi-Fi 2-21

24. M.2 socket 3 2-21

25. SPI TPM header (14-1 pin SPI_TPM) 2-18

26. LCD Panel Monitor Switch header (2-pin PANEL_SW) 2-16

27. LVDS/eDP Signal connector (LVDS_eDP) 2-20

28. LVDS/eDP Panel Enable Signal Selection header (3-pin BKLTEN_SEL) 2-12

Q670EI-IM-A

2-4

IMPORTANT! Unplug all power cables before installing the CPU.

CAUTION!

• Upon purchase of the motherboard, ensure that the PnP cap is on

the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the

PnP cap/socket contacts/motherboard components. The manufacturer will

shoulder the cost of repair only if the damage is shipment/transit-related.

• Keep the cap after installing the motherboard. The manufacturer will

process Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA1200 socket.

• The product warranty does not cover damage to the socket contacts

resulting from incorrect CPU installation/removal, or misplacement/loss/

incorrect removal of the PnP cap.

2.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1700 socket designed for the

Intel® 12th Generation Intel® Core™ i9 / Core™ i7 / Core™ i5 / Core™ i3, Pentium®,

and Celeron® processors.

Q670EI-IM-A

LGA1700

2-5

Chapter 2: Motherboard information

2.3.1 CPU installation

1

2 3

Q670EI-IM-A

2-6

4

5

2-7

Chapter 2: Motherboard information

2.3.2 CPU heatsink and fan assembly installation

CAUTION! Apply the Thermal

Interface Material to the CPU

heatsink and CPU before you

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

B

A

B

LGA1200

LGA1700

LGA1800

12

3 4

Q670EI-IM-A

2-8

A

B

A

To uninstall the CPU heatsink and fan assembly

2

1

2-9

Chapter 2: Motherboard information

2.4 System memory

This motherboard comes with two Double Data Rate 5 (DDR5) Small Outline Dual Inline

Memory Module (SO-DIMM) sockets. The figure below illustrates the location of the DDR5

SO-DIMM sockets:

Channel Sockets

Channel A SO-DIMM_B1

Channel B SO-DIMM_A1

Installing a DIMM

SO-DIMM_A1

SO-DIMM_B1

Q670EI-IM-A

1 2

To remove a DIMM

B

A

B

A

DIMM_B1

DIMM_A1

DIMM_B1

Recommended memory configuration

Q670EI-IM-A

2-10

2.5 Jumpers

Setting Pins

3V (Default) 1-2

5V 3-4

12V 5-6

1. Display panel VCC power selection (6-pin VCC_PWR_SEL)

3

12V

2

5V

1

3V

(Default)

VCC_PWR_SEL

Q670EI-IM-A

Connector type

HEADER 2 x 3p, 2.54mm pitch, S/T

2. COM1/2 Ring/+5V/+12V selection (6-pin COM1_SEL, COM2_SEL)

Setting Pins

+12V 1-2

+5V 3-4

Ring (Default) 5-6

RI

(Default)

+5V+12V

COM1_SEL

COM2_SEL

12 34 56

RI

(Default)

+5V+12V

1

2

3

4

5

6

B

A

Q670EI-IM-A

A

B

Connector type

HEADER 2x3p, 2.54mm pitch, S/T

2-11

Chapter 2: Motherboard information

3. AT/ATX mode selection (3-pin AT_ATX_SEL)

Pins

1-2 (Default) ATX mode

2-3 AT mode

21 2 3

ATX mode

(Default)

AT mode

AT_ATX_SEL

Q670EI-IM-A

Connector type

HEADER 1x3p, 2.54mm pitch, S/T

4. Disable ME jumper (3-pin DIS_ME)

This jumper allows you to enable or disable the Intel® ME function. Set this

jumper to pins 1-2 to enable (default) the Intel® ME function and to pins 2-3 to

disable it.

Q670EI-IM-A

21 2 3

DIS_ME

Disable intel

ME function

Normal

(Default)

Connector type

HEADER 1x3p, 2.54mm pitch, S/T

Q670EI-IM-A

2-12

5. Chassis intrusion header (4-1 pin CHASSIS)

This header is for a chassis-mounted intrusion detection sensor or switch.

Connect one end of the chassis intrusion sensor or switch cable to this

connector. The chassis intrusion sensor or switch sends a high-level signal to

this connector when a chassis component is removed or replaced. The signal

is then generated as a chassis intrusion event.

By default, the pin labeled “Chassis Signal” and “Ground” are shorted with

jumper caps. Remove the jumper caps only when you intend to use the

chassis intrusion detection feature.

Q670EI-IM-A

PIN 1

+5VSB_MB

Chassis Signal

GND

CHASSIS

Connector type

HEADER 4p, K2, 2.54mm pitch

6. LVDS/EDP Panel Enable Signal Selection header (BKLTEN_SEL)

Pins

1-2 (Default) High Active

2-3 Low Active

1 2 2 3

High Active

(Default)

Low Active

BKLTEN_SEL

Q670EI-IM-A

Connector type

HEADER 1x3p, 2.54mm pitch, S/T

La pagina sta caricando ...

Asus Q670EI-IM-A Manuale utente

Asus Q670EI-IM-A Manuale utente

in altre lingue

Documenti correlati

Altri documenti