Asus Q470EA-IM-A Manuale utente

Industrial Motherboard

Q470EA-IM-A

ii

E22554

Revised Edition v4

August 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Chapter 1 Product overview

1.1 Package contents ......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specications ............................................................................... 1-2

Chapter 2 Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Central Processing Unit (CPU) ................................................... 2-4

2.3.1 CPU installation .............................................................. 2-5

2.3.2 CPU heatsink and fan assembly installation ................... 2-7

2.4 System memory ........................................................................... 2-9

2.5 Jumpers ...................................................................................... 2-10

2.6 Connectors ................................................................................. 2-13

2.6.1 Rear panel connectors .................................................. 2-13

2.6.2 Internal connectors ....................................................... 2-15

Chapter 3 BIOS setup

3.1 BIOS Setup program .................................................................... 3-1

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-2

3.3.1 PCH-FW Conguration ................................................... 3-2

3.3.2 Trusted Computing ......................................................... 3-3

3.3.3 CPU Conguration .......................................................... 3-4

3.3.4 Graphics Conguration ................................................... 3-5

3.3.5 PCI Express Conguration .............................................. 3-5

3.3.6 AMT Conguration .......................................................... 3-8

3.3.7 CSM Conguration .......................................................... 3-9

3.3.8 Super IO Conguration ................................................... 3-9

3.3.9 Serial Console Redirection ........................................... 3-11

3.3.10 SATA And RST Conguration ....................................... 3-13

3.3.11 Network Stack Conguration ........................................ 3-14

3.3.12 USB Conguration ........................................................ 3-15

3.3.13 NVMe Conguration ...................................................... 3-16

iv

3.3.14 Onboard Devices Conguration .................................... 3-16

3.3.15 EZ-Flash ....................................................................... 3-16

3.3.16 APM Conguration ........................................................ 3-16

3.3.17 Watchdog Timer ............................................................ 3-18

3.3.19 Miscellaneous ............................................................... 3-18

3.4 Hardware Monitor menu ............................................................ 3-18

3.4.1 Smart Fan Mode ........................................................... 3-18

3.5 Security menu ............................................................................ 3-19

3.5.1 Administrator Password ................................................ 3-19

3.5.2 User Password .............................................................. 3-19

3.5.3 Secure Boot .................................................................. 3-20

3.6 Boot menu .................................................................................. 3-20

3.7 Exit menu .................................................................................... 3-21

Appendix

Notices .......................................................................................................A-1

Service and Support .................................................................................A-5

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x ASUS Q470EA-IM-A Motherboard

1 x Serial ATA 6.0 Gb/s cable

3 x M.2 screw packages

1 x ASUS I/O Shield

NOTE: If any of the above items is damaged or missing, contact your

distributor or sales representative immediately.

1.2 Features

• Intel® socket 1200 for 10th Gen Intel® Core™ i9/ i7/ i5/ i3, Pentium®, and

Celeron® processors

• Four Dual Channel DDR4 2933/2666/2400 MHz U-DIMMs up to 128GB

• 6 x SATA 6.0 Gb/s, 4 x USB 3.2 Gen 2, 2 x USB 3.2 Gen 1, 6 x USB 2.0, 6 x

COM

• 2 x PCIe x16 slot, 1 x M.2 (Key E, 2230) for WiFi/BT device, 1 x M.2 (Key M,

2242/2260/2280) with PCIe and SATA modes for SSD, 1 X M.2 B key, type

3042/3052/2260/2280 (PCIe x1/USB 3.2 Gen1/USB 2.0),*type 3042/3052

support 4G/5G module

• Multi-display: 1 x VGA, 1 x HDMITM, 2 x DisplayPorts

NOTE: The system supports up to three displays simultaneously. If all

four display ports are connected, the display priority will be DisplayPort 1 >

DisplayPort 2 > HDMITM > VGA.

Chapter 1

Product overview

Q470EA-IM-A

1-2

1.3 Specications

(continued on the next page)

CPU

Intel® socket 1200 for 10th Gen Intel® Core™ i9/ i7/ i5/ i3,

Pentium®, and Celeron® processors

Supports Intel® 14nm CPU

Supports up to 125W

Chipset Intel® Q470E Chipset

Memory 4 x U-DIMMs, max. 128GB, DDR4 2933/2666/2400 MHz

Graphics

Integrated graphics processor - Intel® HD Graphics support

Multi-VGA output support: DP/HDMI/VGA ports

- Supports 2 x DisplayPort 1.4a outputs with a maximum

resolution of 4096 x 2160 @60 Hz

- Supports HDMI output with a maximum resolution of

4096 x 2160 @30Hz

- Supports VGA output with a maximum resolution of 1920

x 1200 @60Hz

- Triple Display: VGA+HDMI+DisplayPort / DisplayPort +

HDMI + DisplayPort / VGA + DisplayPort + DisplayPort*

* The system supports up to three displays simultaneously. If

all four display ports are connected, the display priority will be

DisplayPort 1 > DisplayPort 2 > HDMITM > VGA.

Expansion slots

2 x PCI Express 3.0/2.0 x16 slots (1 x16 mode / 2 x8 mode)*

3 x PCI Express 3.0/2.0 x4 slots (x4, x4, x2 mode)

1 x M.2 M Key, type 2242/2260/2280 (PCIe x4 / SATA mode)

1 x M.2 B Key, type 3042/3052/2260/2280 (PCIe x1/USB 3.2

Gen1/USB 2.0), *type 3042/3052 support 4G/5G module

1 x M.2 E Key, type 2230 (PCIe x1 / USB2.0)

1 x SIM slot

* If PCIEX16_2 is occupied, it will be set at 2 x8 mode

automatically by BIOS.

Storage

6 x SATA 3.0 support up to 6.0 Gb/s ports*, RAID 0/1/5/10

* If you install an M.2 PCIe x4 SSD on M.2 M key module, SATA

port 1 and SATA port 2 will be disabled.

* If you install an M.2 SATA SSD on M.2 M key module, SATA

port 2 will be disabled.

LAN Dual Intel® Lan: 1 x Intel® i219LM (1 GbE), 1 x Intel® i225V

(2.5 GbE)

Audio Realtek ALC897 High Denition Audio CODEC

Rear panel I/O ports

1 x VGA port

1 x HDMITM port

2 x DisplayPorts

4 x USB 3.2 Gen 2 ports (3 x Type-A + 1 x Type-C®)

2 x USB 2.0 ports

2 x LAN (RJ45) ports

1 x P/S2 keyboard/mouse combo port

1 x COM port (RS232/422/485)

3 x Audio jacks (Line-Out, Line-In, Mic In)

1-3

Chapter 1: General information

Internal I/O ports

5 x COM Port headers (1 x RS232/422/485, 4 x RS232)

1 x USB 3.2 Gen 1 connector supports additional 2 USB 3.2

Gen 1 ports

2 x USB 2.0 vertical connectors

1 x USB 2.0 header supports additional 2 USB 2.0 ports

1 x CPU Fan header with PWM mode

3 x Chassis Fan headers with PWM mode

6 x SATA 6.0Gb/s ports

1 x RTC Battery connector

1 x Chassis Intrusion header

1 x Front Panel Audio header (AAFP)

1 x System Panel header

1 x Clear CMOS header

1 x Speaker header

1 x LPC Debug header

1 x I2C header

1 x LPT header

1 x Buzzer

1 x GPIO header

1 x S/PDIF header

1 x WDT Enable header

1 x TPM connector

1 x M.2 M Key, type 2242/2260/2280 (PCIe x4 / SATA mode)

1 x M.2 B key, type 3042/3052/2260/2280 (PCIe x1/USB 3.2

Gen1/USB 2.0), *type 3042/3052 support 4G/5G module

1 x M.2 E Key, type 2230 (PCIe x1 / USB2.0)

1 x 24-pin ATX power connector

1 x 8-pin ATX power connector

1 x AT/ATX mode selection jumper

1 x Disable ME jumper

Manageability WfM 2.0, DMI 2.0, WOL by PME, GPIO

Watch dog timer Yes

Power requirement AT/ATX mode

Operation

Temperature 0~60°C

Non-Operation

Temperature -40~85°C

(continued on the next page)

Q470EA-IM-A

1-4

NOTE: Specications are subject to change without notice. Please refer to the

ASUS website for the latest specications.

Relative Humidity 15%~95%

OS support

Windows® 10 (64-bit)

Windows® 10 IoT Enterprise

Ubuntu

RedHat Enterprise

Fedora Workstation

OpenSUSE

Certication CE, FCC

Form Factor ATX Form Factor, 9.6”x 12” (24.4cm x 30.5cm)

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplug the power cord from the wall socket before touching any

component.

• Before handling components, use a grounded wrist strap or touch a safely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, always remove the AC power

by unplugging the power cord from the power outlet. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.

Q470EA-IM-A

2-2

PCIEX4_1

PCIEX4_2

PCIEX4_3

PCI_2

PCI_1

SPEAKER

SATA6G_4

128Mb

BIOS

SATA6G_3 SATA6G_2 SATA6G_1

CHASSIS

AT_ATX_SEL

SPDIF_OUT

WDT_EN

CLRTC

F_PANEL

USB1011

I2C

BUZZER

M.2(WIFI)

LPT

AAFP

TPM

EATXPWR

CPU_FAN CHA_FAN2

CHA_FAN3

CHA_FAN1

BATTERY

PCIEX16_1

PCIEX16_2

Super

I/O

ASM

1083

ASM1480

ALC

897

24.4cm(9.6in)

LGA1200

Intel®

Q470E

Intel®

I219LM

DDR4 DIMM_A1 (64bit, 288-pin module)

2242

2280 2260 2242

2260 30522280 2242

3042

M.2_PCH_(SKT3)

M.2_PCH_(SKT2)

M.2_PCH_(SOCKET3)

PCIE SATA IRST

X4 V V

DDR4 DIMM_A2 (64bit, 288-pin module)

DDR4 DIMM_B1 (64bit, 288-pin module)

DDR4 DIMM_B2 (64bit, 288-pin module)

AUDIO

KBMS_USB89

COM1

HDMI

LAN1_U32G2_2

U32G2_C1

LAN2_U32G2_34

SATA6G_6

SATA6G_5

COM1_SEL

EATX12V

30.5cm(12in)

USB_INTERNAL_13

U32G1_67

USB_INTERNAL_12

COM2 COM3

COM2_SEL

COM4 COM5 COM6

LPC_DEBUG

DIS_ME

GPIO_CON

DP2

DP1

VGA

NANO_SIM

1 432 65 33

1

1516177

7

28

2

8

3

11

10

9

12

13

14

20 20 2012324 11 18192122

29

26

27

25

28

29

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place nine screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION! Do not overtighten the screws! Doing so can damage the

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots Page

1. COM RING/+5V/+12V selection jumper (6-pin COM1_SEL) 2-10

2. EATX Power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-15

3. CPU and Chassis Fan headers (4-pin CPU_FAN, 4-pin CHA_FAN1/2/3) 2-15

4. Intel® LGA1200 CPU socket 2-4

5. M.2 socket 3 (M.2_PCH_(SKT3)) 2-16

6. DDR4 DIMM slots 2-9

7. USB 2.0 connectors / header (USB_INTERNAL_12, USB_INTERNAL_13,

USB1011)

2-16

8. USB 3.2 Gen 1 header (20-1 pin U32G1_67) 2-17

9. M.2 socket 2 (M.2_PCH_(SKT2)) 2-17

10. TPM header (14-1 pin TPM) 2-18

11. SATA 6.0Gb/s ports (7-pin SATA6G_1-6) 2-18

12. M.2 Wi-Fi 2-19

13. I2C header (6-pin I2C) 2-19

14. General Purpose Input/Output header (10-pin GPIO_CON) 2-20

15. System Panel header (10-1 pin F_PANEL) 2-21

16. Chassis Intrusion header (4-1 pin CHASSIS) 2-22

17. Speaker header (4-pin SPEAKER) 2-22

18. Disable ME jumper (3-pin DIS_ME) 2-10

19. LPC Debug header (10-1 pin LPC_DEBUG) 2-23

20. COM Port headers (10-1 pin COM2, COM3, COM4, COM5, COM6) 2-23

21. AT/ATX Mode selection jumper (3-pin AT_ATX_SEL) 2-11

22. WDT Enable jumper (2-pin WDT_EN) 2-11

23. LPT header (26-1 pin LPT) 2-24

24. Front Panel Audio header (10-1 pin AAFP) 2-24

25. Clear CMOS header (2-pin CLRTC) 2-12

26. PCI slots

27. Digital Audio header (4-1 pin SPDIF_OUT) 2-25

28. PCI Express 3.0/2.0 x4 slots

29. PCI Express 3.0/2.0 x16 slots

Q470EA-IM-A

2-4

IMPORTANT! Unplug all power cables before installing the CPU.

CAUTION!

• Upon purchase of the motherboard, ensure that the PnP cap is on

the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the

PnP cap/socket contacts/motherboard components. The manufacturer will

shoulder the cost of repair only if the damage is shipment/transit-related.

• Keep the cap after installing the motherboard. The manufacturer will

process Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA1200 socket.

• The product warranty does not cover damage to the socket contacts

resulting from incorrect CPU installation/removal, or misplacement/loss/

incorrect removal of the PnP cap.

2.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1200 socket designed for

the Intel® 10th Generation Intel® Core™ i9 / Core™ i7 / Core™ i5 / Core™ i3,

Pentium®, and Celeron® processors.

LGA1200

2-5

Chapter 2: Motherboard information

2.3.1 CPU installation

1

A

B

2 3

Q470EA-IM-A

2-6

A

B

C

4

5

2-7

Chapter 2: Motherboard information

2.3.2 CPU heatsink and fan assembly installation

CAUTION! Apply the Thermal

Interface Material to the CPU

heatsink and CPU before you

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

B

A

B

1

2

3 4

Q470EA-IM-A

2-8

A

B

A

To uninstall the CPU heatsink and fan assembly

2

1

2-9

Chapter 2: Motherboard information

2.4 System memory

This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module

(DIMM) sockets. The gure below illustrates the location of the DDR4 DIMM sockets:

Channel Sockets

Channel A DIMM_A1 & DIMM_A2*

Channel B DIMM_B1 & DIMM_B2*

Installing a DIMM

DIMM_B1

DIMM_B2*

DIMM_A1

DIMM_A2*

Recommendedmemoryconguration

DIMM_A2*

DIMM_A1

DIMM_A2*

DIMM_B2*

DIMM_A2*

DIMM_B1

DIMM_B2*

21

B

A

B

A

To remove a DIMM

Q470EA-IM-A

2-10

2.5 Jumpers

1. COM Ring/+5V/+12V selection jumper (6-pin COM1_SEL)

Setting Pins

+12V 1-2

+5V 3-4

RI (Default) 5-6

RI

(Default)

+5V+12V

COM2_SEL

1

2

3

4

5

6

A

B

COM1_SEL

A

Connector type

HEADER 2x3p, 2.54mm pitch, S/T

2. Disable ME jumper (3-pin DIS_ME)

This jumper allows you to enable or disable the Intel® ME function. Set this

jumper to pins 1-2 to enable (default) the Intel® ME function and to pins 2-3 to

disable it.

21 2 3

DIS_ME

Disable intel

ME function

Normal

(Default)

Connector type

HEADER 1x3p, 2.54mm pitch, S/T

2-11

Chapter 2: Motherboard information

3. AT/ATX Mode selection jumper (3-pin AT_ATX_SEL)

Pins

1-2 (Default) High Avtive

2-3 Low Active

21 2 3

High Active

(Default)

Low Active

AT_ATX_SEL

Connector type

HEADER 1x3p, 2.54mm pitch, S/T

4. WDT Enable jumper (2-pin WDT_EN)

A watchdog timer is an electronic timer that is used to detect and recover

from computer malfunctions. The HW WDT (watchdog timer) Enable jumper

allows the HW watchdog resets the system automatically even when the

system crashes.

WDT_EN

21

NOTE: By default, this jumper is set to HW WDT enabled with a jumper cap

attached.

Connector type

HEADER 1x2p, 2.54mm pitch, S/T

Q470EA-IM-A

2-12

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Use a metal object such as a screwdriver to short the two pins.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS Setup

to re-enter data.

NOTE: If the steps above do not help, remove the onboard battery and move

the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS,

reinstall the battery.

5. Clear CMOS header (2-pin CLRTC)

This header allows you to clear the CMOS RTC RAM data of the system

setup information such as date, time, and system passwords.

+3V_BAT

GND

CLRTC

PIN 1

Connector type

HEADER 1x2p, 1.25mm pitch, S/T

La pagina sta caricando ...

Asus Q470EA-IM-A Manuale utente

Asus Q470EA-IM-A Manuale utente

in altre lingue

Documenti correlati

Altri documenti