Panasonic CQDP153WA Istruzioni per l'uso
- Categoria
- Lettore CD
- Tipo
- Istruzioni per l'uso
YFM284C412ZA
Matsushita Electric Industrial Co., Ltd.
Web site: http://www.panasonic.co.jp/global/
Operating Instructions
àçëíêìäñàü èé ùäëèãìÄíÄñàà
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
Removable Front Panel CD Player/Receiver
凄ÌËÚÓ· Ò CD-ÔÎÂÂÓÏ Ë Ò˙ÂÏÌÓÈ ÙÓÌڇθÌÓÈ Ô‡ÌÂθ˛
CQ-DP153WA
• Please read these instructions carefully before using this product and keep this manual for future reference.
•
è‰ ̇˜‡ÎÓÏ ˝ÍÒÔÎÛ‡Ú‡ˆËË ‡ÔÔ‡‡Ú‡ ÔÓÒËÏ ÔÓ˜ËÚ‡Ú¸ ̇ÒÚÓfl˘Û˛ ËÌÒÚÛÍˆË˛ ‚ÌËχÚÂθÌÓ Ë ı‡ÌËÚ¸  ̇
ÔÓθÁÓ‚‡ÌË ̇ ·Û‰Û˘ÂÂ.Ç˚·Ë‡ÈÚ Ê·ÂÏ˚È ‚‡Ë‡ÌÚ.
CQ-DP153WA
3
CQ-DP153WA
2
E
N
G
L
I
S
H
E
N
G
L
I
S
H
çÄ êìëëäéå üáõäÖ
Safety Information
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPLIANCE TO RAIN, SPLASH-
ING, DRIPPING OR MOISTURE.
CAUTION!
THIS PRODUCT IS A CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Clock setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Anti-Theft System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Electrical Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Remote Control Unit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Page
CQ-DP153WA
5
CQ-DP153WA
4
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product
will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineer-
ing, manufactured with carefully selected components and assembled by people who take pride in their work.
Once you discover the quality, reliability, and value we have built into this product, you too will be proud to be a
member of our family.
Precautions
When Driving
Keep the volume level low enough to be aware of road and traffic conditions.
When Washing Your Car
Do not expose the product, including the speakers and CDs, to water or exces-
sive moisture. This could cause electrical shorts, fire, or other damage.
When Parked
Parking in direct sunlight can produce very high temperatures inside your car.
Give the interior a chance to cool down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate with a 12 DC, negative ground battery sys-
tem (the normal system in a North American car).
Disc Mechanism
Do not insert coins or any small objects. Keep screwdrivers and other metallic
objects away from the disc mechanism and disc.
For Installation
The product should be installed in a horizontal position with the front end up at
a convenient angle, but not more than 30˚.
Accessories
1. Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Supplied Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1set (page 12)
3. Removable face plate case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Note: The optional remote control is available from your local dealer (YEFX9992013A).
E
N
G
L
I
S
H
ëÓ‰ÂʇÌËÂ
ëÚ‡Ìˈ‡
àÌÙÓχˆËfl ‰Îfl ·ÂÁÓÔ‡ÒÌÓÒÚË .................................. 2
ëÓ‰ÂʇÌËÂ...................................................3
àÌÒÚÛÍÚË‚Ì˚ Û͇Á‡ÌËfl ...................................... 25
ÄÍÒÂÒÒÛ‡˚ ................................................. 25
鷢ˠ҂‰ÂÌËfl ............................................. 26
ê„ÛÎËӂ͇ ˜‡ÒÓ‚ ............................................ 27
ꇉËÓÔËÂÏÌËÍ .............................................. 28
CD ÔÎÂÂ ....................................................30
ìÒÚ‡Ìӂ͇....................................................32
ëËÒÚÂχ Ô‰ÓÚ‚‡˘ÂÌËfl ͇ÊË ................................35
ëıÂχ ˝ÎÂÍÚ˘ÂÒÍËı ÒÓ‰ËÌÂÌËÈ................................36
èÓ‰Íβ˜ÂÌË „ÓÏÍÓ„Ó‚ÓËÚÂÎÂÈ................................37
è·‚ÍËÈ Ô‰Óı‡ÌËÚÂθ .......................................37
ìÔ‡‚ÎÂÌË ÔÛθÚÓÏ ‰ËÒڇ̈ËÓÌÌÓ„Ó ÛÔ‡‚ÎÂÌËfl ..................38
ÑÂÙÂÍÚӂ͇ ..................................................39
íÂıÌ˘ÂÒÍÓ ӷÒÎÛÊË‚‡ÌË .....................................43
íÂıÌ˘ÂÒÍË ı‡‡ÍÚÂËÒÚËÍË ....................................44
çÄ êìëëäéå üáõäÖ
CQ-DP153WA
7
CQ-DP153WA
6
E
N
G
L
I
S
H
1
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
D
IS
P
TUNE
TRACK
Audio Mode
(Bass/Treble/Balance/Fader)
Volume Bass
Treble
Balance
Fader
Push [SEL] to select the audio mode.
Turn
[VOL] (volume) clockwise to increase volume,
and counterclockwise to decrease volume.
Note: If the fader is set to front, the pre-amp. out-
put (rear) is decreased.
[DISP] (clock)
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
D
IS
P
LOUD
MUTE
SRC
General Clock Setting
Mute
Press [MUTE] to mute the sound completely.
Press
[MUTE] again or turn the knob clockwise
to cancel.
Volume
Turn the knob clockwise to increase volume,
and counterclockwise to decrease volume.
Volume level (0 to 40)
Loudness
Press [LOUD] to enhance bass and treble
tones at low or medium volume.
Press
[LOUD] again to cancel.
Power
Turn the key in the ignition
until the accessory indicator
lights.
Power on: Press [SRC]
(POWER)
.
Power off: Press [SRC]
(POWER)
again
and hold.
ACC
ON
MUTE
LOUD
Display Change
Press [DISP] (display) to switch to the clock display.
Note: Please refer to next page when "AdJ" is displayed.
When the power is off:
No display Clock display
The 24-hour system is used for the clock.
[k TUNE], [l TUNE] (Hours, minutes)
Hours
w Press and hold [DISP] (display) for more than 2
seconds.
Initial Time
q Press [DISP] (clock).
(Hours blink.)
e Press [k TUNE] or [l TUNE].
(Hours set.)
Minutes
r Press [DISP] (display).
(Minutes blink.)
t Press [k TUNE] or [l TUNE].
(Minutes set.)
y Press [DISP] (display).
Note: Press and hold [k TUNE] or [l TUNE] to
change numbers rapidly.
Time Reset
Press and hold [DISP] (display) for more than
2 seconds to activate the time setting mode to reset
the time.
Then, repeat steps
e to y.
(End.)
Loudness indicator
Mute indicator
Up
Down
push
q
w
"AdJ" is displayed when the clock is not adjusted.
Note: If no operation takes place for more than 5 seconds
in audio mode (2 seconds in volume mode), the display
returns to the regular mode.
Bass:
Adjustable range: –12 to +12dB (by 3dB step)
Treble:
Adjustable range: –12 to +12dB (by 3dB step)
Balance:
Adjustable range: 1 to 15 (by 1 step) Balance center
R (right speaker) or L (left speaker)
Fader:
Adjustable range: 1 to 15 (by 1 step) Fader center
F (front speaker) or R (rear speaker)
Remote control sensor (➡page 18)
(default: 0dB)
(default: 0dB)
(default)
(default)
E
N
G
L
I
S
H
2
CQ-DP153WA
9
CQ-DP153WA
8
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
D
IS
P
1234
BAND
65
E
N
G
L
I
S
H
3
E
N
G
L
I
S
H
4
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
TUNE
D•M
TRACK
BAND
SR
C
Radio
Radio
CD player
(When a CD is inserted.)
Manual Tuning
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Seek Tuning
Press and hold ...
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Tuning will automatically stop when the signals of the next broadcast station are received.
Radio Mode
Press [SRC] (source) to change to the radio mode.
Direct Memory
Your favorite FM/AM radio station can be memorized in the D
·
M button and you can call back radio stations just by
pressing the button whatever the current sound source is, even if the power is off.
Default : FM 87.5 MHz
Band
Press [BAND] to select a desired band. (➡ page 8)
Preset Station Setting
Up to 6 stations each can be saved in the FM1, FM2, FM3
and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
Display Change
Press [DISP] (display) to switch to the clock display.
Frequency Clock display
Caution: To ensure safety, never attempt to preset sta-
tions while you are driving.
Manual Preset Memory
Use manual or seek tuning to find a station.
(
➡ page 8)
Press and hold one of the preset buttons
from
[1] to [6] until the display blinks once.
Auto Preset Memory (APM)
Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
• The 6 stations with good reception will be automatically sared in the memory under
preset buttons from
[1] to [6].
• Once set, the preset stations are sequentially scanned for 5 seconds each.
Preset
Station
Calling
C
Press the correspon-
ding preset button
from
[1] to [6] to tune
in a preset station.
Mono/Local Selection (MONO/LOC)
MONO: Noise is significantly decreased when weak signals are received from an FM
broadcast station.
LOCAL: Only strong signals of stations are searched for in seek tuning, while at the
LOCAL OFF setting, relatively weak signals are also searched for.
• Press and hold
[SEL] (MONO/LOC) more than 1 seconds to show the status,continu-
ously hold to change the mode per 1 second. Then, release when at the desired point.
Band
Press [BAND] to change the band.
Press [D·M]. (Press again to cancel)
¡The direct memoried station is received.
Recalling the Direct Memory
D-M
Select the station in Radio mode (➡ above)
Memorize
Press and hold [D·M] until D·M indicator lights.
D-M
Pressing continuously, frequency display will blink once and
new station will be overwritten on existing saved station.
blinks once
lights
D-M
ST
MONO
LOCAL
FM Stereo indicator
q
w
blinks once
(default)
(default)
MONO OFF / LOCAL OFF
LOCAL OFF
MONO ON / LOCAL OFF
MONO ON / LOCAL ON
MONO OFF / LOCAL ON
LOCAL ON
1 second
1 second
1 second
1 second
1 second
Press and hold ...
MONO indicator
LOCAL indicator
Regular mode
1 second
Regular mode
1 second
AM broadcasts
FM broadcasts
CQ-DP153WA
11
CQ-DP153WA
10
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
DISP
SRC
TRACK
DISC
E
N
G
L
I
S
H
6
E
N
G
L
I
S
H
5
CD Player
Press [u] (eject) to stop CD play and eject the disc.
During disc ejection, “EJ” (eject) will be displayed.
Disc Insert and Playback
Stop and Disc Eject
Disc insert
Playback will start automatically after the player recognized the
loaded disc as an ordinary music CD. (When a CD-R or CD-RW
which has CD-DA formatted data as the same as an ordinary music
CD is loaded, this player recognizes it as an ordinary music CD.)
“LOAd” will be displayed until the disc is loaded.
Notes:
• Do not insert a disc when “DISC” indicator lights.
• The power will be turned on automatically when a disc is loaded.
DISC
Display Change
Press [DISP] (display) to switch to the clock display.
Radio
CD player
(When a CD is inserted.)
CD Player Mode (When a CD is in the player.)
Press [SRC] (source) to change to the CD play mode.
Playback will start automatically.
TRACK TRACK
DISC DISC
playing time Track Clock display
Listening to a CD
<CD player display>
Track playing time
Track number
<Disc indicator>
• lights when the disc is loaded.
•
Do not insert a disc when “DISC”
indicator lights.
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
REP
TUNE
TRACK
LOUD
1234
BA
N
D
65
789101112
Caution:
• Only 5" (12 cm) CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
• This unit does not support CD text display.
• This unit does not support MP3/WMA disc playback.
• Refer to page 23 about notes on CD-Rs/RWs.
• This unit is not designed for any 3" (8 cm) disc.
• If you insert an 3" (8 cm) disc and can not eject it, turn ACC of your car off once and turn it on again, then press
[
u] (eject).
• Do not use irregular shaped discs.
• Do not use discs that have a seal or label attached.
• Do not insert foreign matter into the disc slot.
Direct Track Selection
• Press a track number button from [1]
to [6].
The corresponding track starts play-
ing.
• Press and hold a track number button
from
[7] to [12] ([1] to [6]) for more
than 1 second.
The corresponding track starts play-
ing.
Scan Play
C1
Repeat play
C2
Random play
C3
Pause
Press [BAND] (y/ 5) to pause.
Press
[BAND] (y/ 5) again to resume the
playback.
Track Selection
[d TRACK]: Advance to the next track.
[s TRACK]: Back to the beginning of the current track.
Back to the previous track. (Press twice.)
Random play
C3
• Press and hold [REP] (RANDOM) for more than 2
seconds.
All the tracks are played in random order.
• Press and hold
[REP] (RANDOM) again to cancel.
Scan play
C
1
Repeat play
C
2
• Press [REP].
The current track is repeated.
• Press
[REP] again to cancel.
TRACK
R
DISC
왘
TRACK
DISC
TRACK
REP
DISC
lights.
blinks.
Repeat indicator
Track Search
Press and hold ...
[d TRACK]: Fast forward
[s TRACK]: Fast backward
Release to resume the regular play.
• Press and hold
[LOUD] (SCAN),for more than 2
seconds.
The first 10 seconds of each track on the disc are
played in sequence.
• Press and hold
[LOUD] (SCAN) again to cancel.
Label side
[u] (eject)
R 5 : Random indicator
Q’tyItemNo. Diagram
CQ-DP153WA
13
CQ-DP153WA
12
Installation Hardware
Installation
E
N
G
L
I
S
H
8
E
N
G
L
I
S
H
7
• Before installation, check the radio operation with
antenna and speakers.
• Disconnect the cable from the negative (–) battery ter-
minal (see caution below).
• Unit should be installed in a horizontal position with
the front end up at a convenient angle, but not more
than 30°.
Dashboard Installation
Installation Opening
The unit can be installed
in any dashboard having
an opening as shown at
right. The dashboard
should be 4.5 mm - 6 mm thick in order to be able to
support the unit.
Installation Precautions
This product should be installed by a professional
installer, if possible.
In case of difficulty, please consult your nearest author-
ized Panasonic Service Center.
1. This system is to be used only in a 12-volt, DC bat-
tery system (car) with negative ground.
2. Follow the electrical connections carefully (
a page
16). Failure to do so may result in damage to the
unit.
3. Connect the power lead (red) after all other connec-
tions are made.
4. Be sure to connect the battery lead (yellow) to the
positive terminal (+) of the battery or fuse block
(BAT) terminal.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
7. Please carefully read the operating and installation
instructions of the respective equipment before con-
necting it to this unit.
Preparation
30˚ or less
Caution: Do not disconnect the battery terminals of
a car with trip or navigational computer since all
user settings stored in memory will be lost.
Instead take extra care with installing the unit to
prevent shorts.
182 mm
53 mm
Fire Wall of Car
w Hex. Nut
e Rear Support Strap
t Mounting Bolt
q Mounting Collar
r Tapping Screw
3 mmø
(a) Using the Rear Support Strap
Rubber Cushion
(Option)
t Mounting Bolt
q Mounting Collar
Rear Support Bracket
(Provided on the car)
(b) Using the Rubber Cushion (option)
1
2
3
4
Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and
fingers.
Establish the rear connection of the unit.
After fixing Mounting Bolt t and Power Connector
y, fix the rear of the unit to the car body by either
method (a) or (b) shown on the previous page.
Insert Trim Plate u.
After installation reconnect the nega-
tive (–) battery terminal.
First complete the electrical connections, and
then check them for correctness.(
a page 16)
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
The included Mounting Collar
q is designed specially for this
unit. Do not use it to attach any
other model.
y Power Connector
Engage the both sides
Mounting Springs (
C)
in the mounting holes
of the Mounting Collar
q firmly.
Mounting Spring
Mounting
Hole
Tab
q Mounting
Collar
Mounting Springs (C)
Mounting Holes
t Mounting Bolt
The tabs to be bent vary depending on the car.
To securely install the unit, fully bend a num-
ber of the tabs so that there is no rattling.
Example:
q
1
1
1
1
1
1
1
2
Mounting Collar
Hex. Nut (5 mmø)
Rear Ssupport Strap
Tapping Screw
(5 mmø
× 16 mm)
Mounting Bolt (5 mmø)
Power Connector
Trim Plate
Dismounting Plate
w
e
r
t
y
u
i
CQ-DP153WA
15
CQ-DP153WA
14
E
N
G
L
I
S
H
10
Anti-Theft System
Install Removable Face Plate
q Slide the left side of the removable face plate in
place.
w Press the right end of the removable face plate
until “click” is heard.
Caution:
• This face plate is not waterproof. Do not expose it to water or excessive moisture.
• Do not remove the face plate while driving your car.
• Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
• Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical contacts.
• If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
Place the Removable Face
Plate into Case
q Switch off the power of the unit.
w Remove the Removable Face Plate. (➡ page 14)
e Gently press the bottom of the case and open the
cover. Place the face plate into the case and take it
with you when you leave the car.
w
q
Removable Face Plate Case
Tab
Cutout
E
N
G
L
I
S
H
9
Installation (Continued)
To Remove the Unit
Switch off the power of the unit.
Release button
Remove the removable face
plate.
q Press [ ]. The
removable face plate
will be opened.
Remove the Trim Plate u with a screwdriver.
q Insert the Dismounting Plate i along the
grooves on both sides of the main unit
until
“
click
”
is heard.
w Pull out the unit while pushing the plates
further inside.
q Press
u Trim Plate
Screwdriver
Remove the unit pulling with both hands.
q
w
e
r
w
q
Insert
wPull out
i Dismounting Plate
“Click”
Insert the tab
end in the outer
groove.
Contact
CQ-DP153WA
17
CQ-DP153WA
16
E
N
G
L
I
S
H
E
N
G
L
I
S
H
12
Speaker Connections
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
L
R
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
L
R
L
R
L
R
<Right>
<Wrong>
(White)
(White
w/black stripe)
Chassis
(Gray
w/black stripe)
(Gray)
Chassis
• Use ungrounded speaker only.
• The maximum speaker input should be 45 W or more. (If used with the optional
power amplifier, the speaker input should be higher than the maximum amplifier
output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected separately
using parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30 cm
apart) from the antenna and antenna extension cord.
• Never connect the speaker cord to
the body of the car.
• Do not use a 3-wire type speaker
system having a common earth
lead.
• Do not connect more than one
speaker to one set of speaker
leads.
Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting
the unit directly without a fuse, could cause fire or damage to the unit.
If the fuse replacement fails, contact your nearest authorized Panasonic Service Center.
E
N
G
L
I
S
H
11
Electrical Connections
Caution:
• This product is designed to operate with a 12 V DC, negative ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Strip about 5mm of the lead ends for connection (only non-ISO connector cords).
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
• Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased
when the battery terminals are disconnected.
❐Wiring Diagram
Power connector
Antenna
y
(Yellow)
Battery lead
To the car battery, continuous +12 V DC
Fuse (15 A)
(Red)
Power lead
To ACC power, +12 V DC
(Dark blue/
white stripe)
(Dark blue)
(Black)
Ground lead
To a clean, bare metallic
part of car chassis.
(+)(—) (+)(—) (+)(—)(+)(—)
Left speaker
(Front)
Right speaker
(Front)
(White) (Gray) (Green) (Violet)(White/
black
stripe)
(Green/black
stripe)
(Violet/black
stripe)
(Gray/black
stripe)
FRONT SP REAR SP
Left speaker
(Rear)
Right speaker
(Rear)
Speaker lead
Preamp output connector (rear)
R (Red)
CQ-DP153WA
Amp. relay control power lead
(Max. 500 mA)
This lead is for connection to the power
amplifier.
ACC
If the fuse (rear panel) blows frequently, they may
be something wrong with the unit. Consult your
nearest dealer for service.
Motor antenna
relay control lead
(To motor antenna)
(Max. 500 mA)
This lead is not intended
for use with switch actuated
power antenna.
Note: This lead is used for power
control when an external power
amplifier is connected. The power
supply of a power amplifier will be
activated when turning on the power of
this unit.
Note: The power antenna extends
automatically when the FM/AM
radio mode is selected.
BATTERY 15A
L (White)
C
C
CQ-DP153WA
19
CQ-DP153WA
18
Battery Notes
Remove and dispose of an old battery immediately.
Battery Information:
• Battery type: Panasonic lithium battery (CR2025) (included)
• Battery life: Approximately 6 months with normal use (at room temperature)
E
N
G
L
I
S
H
14
E
N
G
L
I
S
H
13
Remote Control Unit Preparation
Battery Installation
q Remove the battery holder.
Pull the battery holder by the position B while pushing
position A in the direction indicated by the arrow.
w Install the battery on the battery holder.
Place a battery in the holder with its “+” side facing up as
shown in the figure.
e Insert the battery holder.
Push the battery holder back into its original position.
Back side
Lithium battery
(included)
Battery holder
Position A
Position B
• Do not disassemble or short the battery. Do not throw a battery into a fire.
• Keep batteries away from children to avoid the risk of accidents.
• Be careful to observe proper local disposal rules when you dispose of batteries.
Control Reference Guide
Buttons of the remote control function in the same way as the controls on the main unit of the reference page.
Point the remote control unit at the main unit’s sensor.
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.
Battery leakage may damage the unit.
[MUTE]
(Mute)
(
➡ page 6)
[VOL] [j] [i]
(Volume )
[TUNE] [TRACK] [k] [l] [s] [d]
(Tune/track selection/track search)
(
➡ page 8, 11)
PWR
MODE
PRG
TUNE
TRACK
Car Audio
BAND/DISC UP
VOL
MUTE
(ATT)
[PWR]
(Power)
POWER
MUTE
7
1
APM
B
A
N
D
S
R
C
V
O
L
U
M
E
P
U
S
H
S
E
L
•
M
O
N
O
/
L
O
C
[MODE]
(Mode (source))
(
➡ page 8, 10)
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch the power off.
Disconnect the power connector and check that there is neither
smoke nor heat from the unit before asking for repairs. Never try to
repair the unit by yourself because it is dangerous to do so.
Caution:
• Do not use the unit if it malfunctions or if
there is something wrong.
• Do not use the unit in irregular condition,
for example, without sound, or with smoke
or foul smell, which can cause ignition or
electric shock. Immediately stop using it
and call the store where you purchased it.
Troubleshooting
[BAND]
(Band)
(
➡ page 8)
No power.
Trouble
Car’s ignnition switch is not on.
➡Turn your car’s ignition switch to ACC or ON.
Cables are not correctly connected.
➡Connect cables correctly.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always active.
Accessory cable is not correctly connected.
➡Connect the accessory cable to your car’s ACC source.
Grounding wire is not correctly connected.
➡Connect the grounding wire to a metal part of the car.
Fuse is burnt out.
➡Call the store where you purchased the unit.
Cause/Step
Troubleshooting Tips
❐Common
No sound.
Mute is set to ON.
➡Set it to OFF.
Noise.
Grounding wire is not correctly connected.
➡Connect the grounding wire to a metal part of the car.
Cables are not correctly connected.
➡Connect cables correctly.
Condensation (dew).
➡Wait for a while before use.
q
w
e
CQ-DP153WA
21
CQ-DP153WA
20
E
N
G
L
I
S
H
16
E
N
G
L
I
S
H
15
Troubleshooting(Continued)
Trouble
Much noise in FM stereo
and monaural broad-
casts.
The antenna ground lead dosen’t connect properly.
➡Connect the antenna ground lead properly.
Preset station is reset.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always active.
The radio antenna is not extended enough.
➡Extend fully the radio antenna.
The motor antenna relay control lead is not connected correctly.
➡If there is a motor antenna in the car, connect the motor antenna
relay control lead to the motor antenna lead that is installed in the
car correctly.
Cause/Step
❐Radio
Trouble
Sound skips due to
vibration.
Mounting angle is over 30˚.
➡Adjust mounting angle to less than 30˚.
Disc is not ejected.
• Disc is defective.
• Mechanical trouble.
➡Press [u] (eject). If normal operation is not restored, call the store
where you purchased the unit.
Time is counted but no
sound comes out.
The first track of a mix mode disc was reproduced. (Mix mode is a format in
which data except music is recorded on the first track and music data is
recorded on other than the first track in a session.)
➡Play back music data recorded on other than the first track.
Instable mounting.
➡Mount the unit securely with the mounting parts, referring to the sec-
tion on installation.
Cause/Step
❐CD (Continued)
Trouble
Disc is in the CD com-
partment but no sound is
made, or disc is ejected
automatically.
Disc is upside down.
➡Place disc in the correct direction with the label side up.
• Disc is dirty.
• Disc has scratches.
➡Clean disc, referring to the section on “Notes on CD/CD Media
(CD-R, CD-RW)”.
A disc that has data other than CD-DA type is loaded.
➡Discs that have CD-DA type data should be used.
➡The unit may not successfully play back a CD-R/RW that is made in
combination of writing software, a CD recorder (CD-R/RW drive) and
a disc which are incompatible one another. Refer to instructions for
the concerned devices for details.
Sound skips, bad sound
quality. (e.g. caused by
noise)
• Disc is dirty.
• Disc has scratches.
➡Clean disc, referring to the section on “Notes on CD/CD Media
(CD-R, CD-RW)”.
➡The unit may not successfully play back a CD-R/RW that is made in
combination of writing software, a CD recorder (CD-R/RW drive) and
a disc which are incompatible one another. Refer to instructions for
the concerned devices for details.
Cause/Step
❐CD
Trouble
No sound from left,
right, front or rear
speakers.
Left and right balance, or front and rear balance is off on one side.
➡Adjust balance/fader setting as appropriate.
Cables are not correctly connected.
➡Connect the cables correctly.
The right speaker wire is connected to the left speaker and the left speaker
wire to the right speaker.
➡Connect the speaker wires to the correct ones.
Left and right sounds are
reversed in stereo lis-
tening.
Cause/Step
❐Sound Setting
CQ-DP153WA
23
CQ-DP153WA
22
E
N
G
L
I
S
H
18
E
N
G
L
I
S
H
17
Troubleshooting (Continued)
Error Display Messages
❐CD
Display Cause/Step
❐Cleaning this Unit
Use a dry, soft cloth to wipe.
❐Caution on Cleaning
Never use solvents such as benzine, thinner as
they may mar the surface of the unit.
Label side
<Right> <Wrong>
Do not use irregular shaped discs.
How to hold the disc
• Do not touch the underside of the disc.
• Do not scratch the discs.
• Do not bend disc.
• When not in use, keep the disc in the case.
Do not use irregular shaped discs.
Do not leave discs on the following places:
• Direct sunlight
• Near car heaters
• Dirty, dusty and damp areas
• Seats and dashboards
Disc cleaning
Use a dry, soft cloth to wipe from the center outward.
Do not attach any seals or labels to your discs.
Do not write on the disc label in a heavy pen or ballpoint
pen stroke.
Notes on Discs
Do not play any ordinary music CDs with labels other than this
one.
Care of the Unit
Maintenance
Notes on CD-Rs/RWs
• You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to
their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.
• CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them
inside a car for extended periods may damage them and make playback impossible.
• The unit may not successfully play back a CD-R/RW that was made by the combination of writing software, a CD
recorder (CD-R/RW drive) and a disc if they are incompatible one another.
• This player cannot play the CD-R/RW discs if the session is not closed.
• This player cannot play the CD-R/RW discs which contains other than CD-DA data.
• Be sure to observe the instructions of CD-R/RW disc for handling it.
Trouble
Buttons are invalid for
operation.
Battery polarities are reversed.
➡Insert the battery correctly.
Wrong battery.
➡Check the battery.
Battery has run down.
➡Replace the battery.
Remote control unit is in the wrong direction.
➡Direct the remote control unit at sensor on the front panel.
Cause/Step
❐Remote Control Unit
• Disc is dirty, or is upside down.
• A disc that has data other than CD-DA type is loaded.
➡Check the disc.
Disc has scratches.
➡Check the disc.
No operation by some cause.
➡If normal operation is not restored, call the store where you purchased
the unit to ask for repairs.
CQ-DP153WA
24
E
N
G
L
I
S
H
19
❐General
Power supply: 12 V DC (11 V–16 V), test voltage 14.4 V, negative ground
Current consumption: Less than 2.5 A (CD play mode; 0.5 W
×4 channels)
Maximum power output: 45 W
×4 channels at 1 kHz, volume control maximum
Tone adjustment range:
Bass: ±12 dB at 100 Hz
Treble: ±12 dB at 10 kHz
Suitable speaker impedance: 4–8 Ω
Preamp output voltage: 2.0 V (CD play mode; 1 kHz, 0 dB)
Output impedance: 200 Ω
Dimensions (W
×H×D): 178×50×155 mm
Weight: 1.4 k
g
❐FM Stereo Radio
Frequency range: 87.5 MHz–108.0 MHz
Usable sensitivity: 11.0 dBf. (1.25 µV, 75 Ω)
50 dB quieting sensitivity: 15.2 dBf. (1.6 µV, 75 Ω)
Frequency response: 30 Hz–15 kHz (±3 dB)
Alternate channel selectivity: 75 dB
Stereo separation: 42 dB (1 kHz)
Image response ratio: 75 dB
IF response ratio: 100 dB
Signal/noise ratio: 70 dB
❐AM Radio
Frequency range: 531 kHz–1602 kHz
Usable sensitivity: 28 dBµV (25 µV, S/N 20 dB)
❐CD Player
Sampling frequency: 8 times oversampling
DA converter: MASH·1 bit/4 DAC system
Error correction system: Panasonic super decoding algorithm
Pick-up type: Astigma 3-beam
Light source: Semiconductor laser
Wave length: 780 nm
Frequency response: 20 Hz–20 kHz (±1 dB)
Signal/noise ratio: 96 dB
Total harmonic distortion: 0.01 % (1 kHz)
Wow and flutter: Below measurable limits
Channel separation: 75 dB
Note: Specifications and the design are subject to modification without notice due to improvements in technology.
Specifications
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Panasonic CQDP153WA Istruzioni per l'uso
- Categoria
- Lettore CD
- Tipo
- Istruzioni per l'uso
in altre lingue
Documenti correlati
-
Panasonic Car Stereo System CQ-C1100W Manuale utente
-
-
-
-
-
-
-
-
-