Planar PD4010 Manuale utente

Categoria
Proiettori di dati
Tipo
Manuale utente

Questo manuale è adatto anche per

User's Guide
PD4010
PD7010
PD7060
2
English
Planar Systems, Inc.
Corporate Headquarters
1195 NW Compton Drive
Beaverton, OR 97006-1992
Planar Customer Support
Telephone: US: 1-866-PLANAR1 (866) 752-6271
Outside US: (503) 748-5799
E-mail: PlanarSupport@planar.com
Online Technical Library: http://www.planar.com/support
Hours: M-F, 8am - 8pm ET, 12pm - 12am GMT
Français
Planar Systems, Inc.
Maison mère
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Support technique Planar
Telephone: en Anglais: 1-866-PLANAR1 (866) 752-6271
Hors des Etats-Unis: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Support technique en ligne: http://www.planar.com/support
Horaires: M-F, 8am - 8pm ET, 12pm - 12am GMT
Deutsch
Planar Systems, Inc.
Korporatives Hauptquartier
1195 NW Compton Drive, USA
Beaverton, OR 97006-1992
Kundenunterstützung Planars
Telefon: VS: 1-866-PLANAR1 (866) 752-6271
Außerhalb der Vereinigten Staaten: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Online Technische Bibliothek: http://www.planar.com/support
Stunden: M-F, 8am - 8pm ET, 12pm - 12am GMT
Italiano
Planar Systems, Inc.
Sede
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Planar Assitenza clienti
Telefono: US: 1-866-PLANAR1 (866) 752-6271
Resto del mondo: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Risorse tecniche online: http://www.planar.com/support
Orario: M-F, 8am - 8pm ET, 12pm - 12am GMT
Español
Planar Systems, Inc.
Sede corporativo
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Apoyo de cliente
Teléfono: EEUU: 1-866-PLANAR1 (866) 752-6271
Outside US: (503) 748-5799
E-mail: PlanarSupport@planar.com
Biblioteca Técnica Online: http://www.planar.com/support
Horas: M-F, 8am - 8pm ET, 12pm - 12am GMT
Svenska
Planar Systems, Inc.
Huvudkontor
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Planar Kundsupport
Telefon: US: 1-866-PLANAR1 (866) 752-6271
Internationellt: +1 (503) 748-5799
E-post: PlanarSupport@planar.com
On-line tekniska bibliotek: http://www.planar.com/support
Öppet: Mån-fre 8.00-20.00 ET, 12.00-24.00 GMT
简体中文
美商平达科技股份有限公司Planar System, Inc.
美国总公司
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
客户支持部
电话美国1-866-PLANAR1 (866) 752-6271
美国境外+1 (503) 748-5799
电子邮件信箱PlanarSupport@planar.com
在线技术总览http://www.planar.com/support
查询时间周一至周五东部时间 8am8pm格林威治标准时间 12pm12am
繁體中文
美商平達科技股份有限公司(Planar System, Inc.
美國總公司
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
平達科技客戶支援部
電話:美國:1-866-PLANAR1 (866) 752-6271
美國境外:+1 (503) 748-5799
電子郵件信箱:PlanarSupport@planar.com
線上技術總覽:http://www.planar.com/support
查詢時間:週一至週五,東部時間 8am~8pm,格林威治標準時間 12pm~12am
日本語
プラナーシステムズ(株)
本社
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
プラナーカスタマーサポート
電話アメリカ1-866-PLANAR1 (866) 752-6271
アメリカ本土以外+1 (503) 748-5799
オンラインテクニカルライブラリhttp://www.planar.com/support
営業時間M-F, 8am - 8pm ET, 12pm - 12am GMT
한국어
플래너 시스템
본사(미국)
1195 NW Compton Drive, USA
Beaverton, OR 97006-1992
플래너 소비자 지원
미국 전화: 1-866-PLANAR1 (866) 752-6271
미국외 전화
: +1 (503) 748-5799
이메일: PlanarSupport@planar.com
온라인 기술 자료: http://www.planar.com/support
시간: 월-금, 오전8시 – 오후 8시(미동부), 오전 12시
– 오후 12시(GMT)
Português
Planar Systems, Inc.
Cooperar Quartel-general
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Suporto para cliente do Planar
Telefone: EUA: 1-866-PLANAR1 (866) 752-6271
Fora de EUA: (503) 748-5799
E-mail: PlanarSupport@planar.com
Biblioteca Técnica Online: http://www.planar.com/support
Horas: M-F, 8am - 8pm ET, 12pm - 12am GMT
Русский
Planar Systems, Inc.
Корпоративный Штаб
1195 NW Compton Drive, USA
Beaverton, OR 97006-1992
Planar Поддержка Клиента
Телефон: США: 1-866-PLANAR1 (866) 752-6271
Внутри США: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Онлайн Техническая Библиотека: http://www.planar.com/support
Часы: M-F, 8am - 8pm ET, 12pm - 12am GMT
3
Copyright
This publication, including all photographs, illustrations and software, is protected under inter-
national copyright laws, with all rights reserved. Neither this manual, nor any of the material
contained herein, may be reproduced without written consent of the author.
© Copyright October, 2006
About this Users Guide
This User’s Guide is intended for end users and describes how to quickly install and operate
the DLP projector. For detailed information, refer to the User’s Guide on the CD or on the
manufacturer’s website.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registra-
tions and pending applications in other countries throughout the world.
All other product names used in this guide are the properties of their respective owners and
are acknowledged.
Important Recycle Instructions
Lamp(s) inside this product contain mercury. This product may con-
tain other electronic waste that can be hazardous if not disposed of
properly. Recycle or dispose in accordance with local, state, or fed-
eral Laws.
For more information, contact the Electronic Industries Alliance at
WWW.EIAE.ORG.
For lamp speci c disposal information check
WWW.LAMPRECYCLE.ORG.
Disposal of old Electrical & Electronic Equipment (Applicable
throughout the European Union and other European countries with
separate collection programs).
This symbol found on your product or on its packaging, indicates that this product should
not be treated as household waste when you wish to dispose of it. Instead, it should
be handed over to an applicable collection point for the recycling of electrical and elec-
tronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which could
otherwise be caused by inappropriate disposal of this product. The recycling of materi-
als will help to conserve natural resources. This symbol is only valid in the European
Union. If you wish to discard this product, please contact your local authorities or dealer
and ask for the correct method of disposal.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the “Regulatory
Compliance” section on page 45 of the User’s Manual.
Register Your Planar Product Today
Thank you for choosing Planar. To assure you receive all the bene ts of your Planar prod-
uct and services, register your Planar product today. Visit our website:
http://www.planar.com/support/product_registation.html
Cables, Replacement Lamps and Accessories
To nd cables, replacement lamps and accessories for your Planar projector, LCD monitor,
touchscreen, or other Planar products, visit our online store:
http://www.PlanarOnlone.com or
nd other stores that stock Planar products at
http://www.planar.com/howtobuy.
4
PACKING CHECKLIST
Carefully unpack the projector and check that the following items are included.
DLP Projector
Remote Control
(with two AAA batteries)
DVI to HDMI Adaptor
(PD4010 only)
Power Cord
(By country)
Component
Video Cable
User's Guide
PD4010
PD7010
PD7060
CD-ROM
(This Users Manual)
Users Guide
Contact your dealer immediately if any items are missing, appear damaged, or if
the unit does not work.
5
REMOTE CONTROL FUNCTIONS
ITEM LABEL DESCRIPTION
1 Power On Turns projector power on
ON POWER OFF
1
23
45
SOURCE
2 Power Off Turns projector power off
3 Source 1 User con gurable (Default: HDMI)
4 Source 2 User con gurable (Default:
Component)
5 Source 3 User con gurable (Default: DVI-D)
6 Source 4 User con gurable (Default: PC)
7 Source 5 User con gurable (Default: Video)
8 Up cursor
Navigates and changes settings in
the OSD
9 Left cursor
10 Enter Changes settings in the OSD
11 Right cur-
sor
Navigates and changes settings in
the OSD
12 Down cur-
sor
13 Exit Exits OSD menus or menu selection
elds
14 Menu Opens the OSD
15 Hot Key 1 User memory setting 1
16 Hot Key 2 User memory setting 2
17 Hot Key 3 User memory setting 3
18 Contrast Adjusts screen contrast
19 Brightness Adjusts screen brightness
20 Aspect
ratio
T
oggles aspect ratio: 16:9
Letterbox 4:3 Native
21 Gamma Toggles gamma: Film Video
Cinema PC Photo
22 Overscan Toggles overscan: Off Crop
Zoom
23 Keystone Adjusts keystone
24 Auto Automatically synchronizes display
settings in RGB mode
25 Blank Makes the screen blank
26 LED Turns back LED light on and off
6
INSERTING THE REMOTE CONTROL BATTERIES
1.
Remove the battery com-
partment cover by sliding
the cover in the direction of
the arrow.
2.
Insert the supplied batteries
taking note of the polarity
(+/-) as shown here.
3.
Replace the cover.
CAUTION
CAUTION
1. Only use AAA alkaline batteries.
2. Dispose of used batteries according to local ordinance
regulations.
3. Remove the batteries when not using the projector for
prolonged periods.
7
CONNECTING INPUT DEVICES
A PC or notebook computer as well as video devices can be connected to
the projector at the same time. Video devices include DVD, VCD, and VHS
players, as well as movie camcorders, digital still cameras and high de nition
sources. Check the User’s Manual of the connecting device to con rm it has
the appropriate output connector.
As a safety precaution, disconnect all power to the projec-
tor and connecting devices before making connections.
8
STARTING AND SHUTTING DOWN THE PROJECTOR
1.
Remove the lens cover.
2.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
3.
Press the Power button. The Power LED
on the projector turns on. Turn on the con-
nected devices.
4.
The language selection screen appears
(Initial setup only). Select the desired lan-
guage.
1. Press the cursor STbutton until
Language is highlighted.
2. Press the cursor W X or Menu but-
ton to con rm the language, and
close the OSD.
5.
If more than one input device is connect-
ed, press the source bottom to search.
6.
Press the Power button to turn off the
projector. The Powering Down screen
appears.
Note: Pressing the Power button again
within ve (5) seconds cancels powering
down the projector.
7.
When the Power LED stops ashing, the
projector goes on standby mode.
Do not unplug the power cord until the Ready LED stops
ashing, indicating the projector has cooled down.
9
ADJUSTING THE FOCUS AND ZOOM
1.
Locate the image zoom and focus adjust-
ment rings on the projector.
Zoom Focus
2.
Use the image zoom control to resize the
projected image and screen size.
3.
Rotate the image focus control to sharpen
the projected image.
10
TROUBLESHOOTING
These guidelines provide tips to deal with problems you may encounter while
using the projector. If the problem remains unsolved, contact your dealer for
assistance.
Often after time spent troubleshooting, the problem is traced to something as
simple as a loose connection. Check the following before proceeding to the
problem-speci c solutions.
Use some other electrical device to con rm that the electrical outlet is
working.
Ensure the projector is turned on.
Ensure all connections are securely attached.
Ensure the attached device is turned on.
Ensure a connected PC is not in suspend mode.
Ensure a connected notebook computer is con gured for an external
display. (This is usually done by pressing an Fn-key combination on the
notebook.)
Common Problems and Solutions
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto button on the remote control or projector.
3. Ensure the projector-to-screen distance is within the 10-meter (33-feet)
specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as pos-
sible.
2. Use the Keystone button on the remote control or projector to correct the
problem.
Problem: The image is reversed or upside down
Check the Projection setting on the Utility menu of the OSD.
Problem: The image is streaked
1. Set the Frequency and Tracking settings on the Utility menu of the
OSD to the default settings.
2. To ensure the problem is not caused by a connected PC’s video card,
connect to another computer.
11
Problem: The image is at with no contrast
Adjust the Contrast setting on the Image menu of the OSD.
Problem: The color of the projected image does not match the source image.
Adjust the Color Temperature and Gamma settings on the Image
menu of the OSD.
Lamp Problems
Problem: There is no light from the projector
1. Check that the power cable is securely connected.
2. Ensure the power source is good by testing with another electrical de-
vice.
3. Restart the projector in the correct order and check that the Power LED
is green.
4. If you have replaced the lamp recently, try resetting the lamp connec-
tions.
5. Replace the lamp module.
6. Put the old lamp back in the projector and have the projector serviced.
Problem: The lamp goes off
1. Power surges can cause the lamp to turn off. Press the power button
twice to turn off the projector. When the Ready LED is on, press the
power button.
2. Replace the lamp module.
3. Put the old lamp back in the projector and have the projector serviced.
Remote Control Problems
Problem: The projector does not respond to the remote control
1. Direct the remote control towards remote sensor on the projector.
2. Ensure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4. Check the battery polarity.
5. Replace the batteries.
6. Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
12
REGULATORY COMPLIANCE
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Changes or modi cations not expressly approved by the parties responsible
for compliance could void the user’s authority to operate the equipment.
Canada
This class B digital apparatus complies with Canadian ICES-003.
Safety Certi cations
FCC Class B, UL, c-UL, CE, TUV-GS, CCC, PCT, MIC/EK
EN 55022 Warning
This is a Class B product. In a domestic environment, it may cause radio
interference, in which case the user may be required to take adequate
measures. The typical use is in a conference room, meeting room, or
auditorium.
Guide d'Utilisation
Projecteur
PD4010
PD7010
PD7060
2
English
Planar Systems, Inc.
Corporate Headquarters
1195 NW Compton Drive
Beaverton, OR 97006-1992
Planar Customer Support
Telephone: US: 1-866-PLANAR1 (866) 752-6271
Outside US: (503) 748-5799
E-mail: PlanarSupport@planar.com
Online Technical Library: http://www.planar.com/support
Hours: M-F, 8am - 8pm ET, 12pm - 12am GMT
F2rançais
Planar Systems, Inc.
Maison mère
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Support technique Planar
Telephone: en Anglais: 1-866-PLANAR1 (866) 752-6271
Hors des Etats-Unis: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Support technique en ligne: http://www.planar.com/support
Horaires: M-F, 8am - 8pm ET, 12pm - 12am GMT
Deutsch
Planar Systems, Inc.
Korporatives Hauptquartier
1195 NW Compton Drive, USA
Beaverton, OR 97006-1992
Kundenunterstützung Planars
Telefon: VS: 1-866-PLANAR1 (866) 752-6271
Außerhalb der Vereinigten Staaten: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Online Technische Bibliothek: http://www.planar.com/support
Stunden: M-F, 8am - 8pm ET, 12pm - 12am GMT
Italiano
Planar Systems, Inc.
Sede
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Planar Assitenza clienti
Telefono: US: 1-866-PLANAR1 (866) 752-6271
Resto del mondo: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Risorse tecniche online: http://www.planar.com/support
Orario: M-F, 8am - 8pm ET, 12pm - 12am GMT
Español
Planar Systems, Inc.
Sede corporativo
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Apoyo de cliente
Teléfono: EEUU: 1-866-PLANAR1 (866) 752-6271
Outside US: (503) 748-5799
E-mail: PlanarSupport@planar.com
Biblioteca Técnica Online: http://www.planar.com/support
Horas: M-F, 8am - 8pm ET, 12pm - 12am GMT
Svenska
Planar Systems, Inc.
Huvudkontor
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Planar Kundsupport
Telefon: US: 1-866-PLANAR1 (866) 752-6271
Internationellt: +1 (503) 748-5799
E-post: PlanarSupport@planar.com
On-line tekniska bibliotek: http://www.planar.com/support
Öppet: Mån-fre 8.00-20.00 ET, 12.00-24.00 GMT
简体中文
美商平达科技股份有限公司Planar System, Inc.
美国总公司
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
客户支持部
电话美国1-866-PLANAR1 (866) 752-6271
美国境外+1 (503) 748-5799
电子邮件信箱PlanarSupport@planar.com
在线技术总览http://www.planar.com/support
查询时间周一至周五东部时间 8am8pm格林威治标准时间 12pm12am
繁體中文
美商平達科技股份有限公司(Planar System, Inc.
美國總公司
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
平達科技客戶支援部
電話:美國:1-866-PLANAR1 (866) 752-6271
美國境外:+1 (503) 748-5799
電子郵件信箱:PlanarSupport@planar.com
線上技術總覽:http://www.planar.com/support
查詢時間:週一至週五,東部時間 8am~8pm,格林威治標準時間 12pm~12am
日本語
プラナーシステムズ(株)
本社
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
プラナーカスタマーサポート
電話アメリカ1-866-PLANAR1 (866) 752-6271
アメリカ本土以外+1 (503) 748-5799
オンラインテクニカルライブラリhttp://www.planar.com/support
営業時間M-F, 8am - 8pm ET, 12pm - 12am GMT
한국어
플래너 시스템
본사(미국)
1195 NW Compton Drive, USA
Beaverton, OR 97006-1992
플래너 소비자 지원
미국 전화: 1-866-PLANAR1 (866) 752-6271
미국외 전화
: +1 (503) 748-5799
이메일: PlanarSupport@planar.com
온라인 기술 자료: http://www.planar.com/support
시간: 월-금, 오전8시 – 오후 8시(미동부), 오전 12시
– 오후 12시(GMT)
Português
Planar Systems, Inc.
Cooperar Quartel-general
1195 NW Compton Drive
Beaverton, OR 97006-1992, USA
Suporto para cliente do Planar
Telefone: EUA: 1-866-PLANAR1 (866) 752-6271
Fora de EUA: (503) 748-5799
E-mail: PlanarSupport@planar.com
Biblioteca Técnica Online: http://www.planar.com/support
Horas: M-F, 8am - 8pm ET, 12pm - 12am GMT
Русский
Planar Systems, Inc.
Корпоративный Штаб
1195 NW Compton Drive, USA
Beaverton, OR 97006-1992
Planar Поддержка Клиента
Телефон: США: 1-866-PLANAR1 (866) 752-6271
Внутри США: +1 (503) 748-5799
E-mail: PlanarSupport@planar.com
Онлайн Техническая Библиотека: http://www.planar.com/support
Часы: M-F, 8am - 8pm ET, 12pm - 12am GMT
3
Copyright
Cette publication, y compris toutes les photographies, illustrations et logiciels, est protégée
par les lois internationales du copyright. Ni ce guide, ni le matériel contenu ne peut être re-
produit sans le consentement de l’auteur.
© Copyright Octobre, 2006
À propos de ce Guide d’utilisation
Ce Guide d’utilisation est destiné aux utilisateurs naux et décrit comment installer rapide-
ment et utiliser le projecteur DLP. Pour plus de détail, referez-vous au Guide d’utilisation sur
le CD ou sur le site web du constructeur.
Reconnaissance de marque
Kensington est une marque U.S. marque déposée par ACCO Brand Corporation avec un
enregistrement valide et en cours dans les autres pays du monde.
Tous les autres noms de produit utilisées dans ce guide sont les propriétés de leur proprié-
taires respectifs et sont reconnues.
Instructions importantes pour le recyclage:
La ou les lampes contenues dans ce produit contiennent du mer-
cure. Ce produit peut contenir d’autres matériaux électroniques
qui peuvent être dangereux s’ils ne sont pas traités correctement.
Recyclez ou procédez en accord avec les lois locales, ou de l’état
Pour plus d’informations, contactez l’Alliance des industries de à
WWW.EIAE.ORG.
Pour des informations spéci ques sur le recyclage de la lampe, con-
sultez
WWW.LAMPRECYCLE.ORG.
Jetable comme équipement électrique et électronique (Applicable
dans l’Union Européenne et les autres payes d’Europe avec des
programmes de collectes propres).
Ce symbole gure sur votre produit ou sur son emballage, indique qu’il ne doit pas
être traité comme des ordures ménagères lorsque vous désirez vous en débarrass-
er. Au lieu de cela, il doit être déposés dans un centre de collecte pour recycler les
composants électroniques et électriques. En vous assurant que ce produit est traité
convenablement, vous participerez à la prévention et au maintien de l’environnement
et de la santé de l’homme auquel cas il pourrait y avoir des conséquences négatives
sur l’environnement s’il n’est pas traité convenablement. Le recyclage de matériel
aidera à conserver les ressources naturelles. Ce symbole n’est valide que dans l’Union
Européenne. Si vous voulez rejeter ce produit, veuillez contacter vos autorités locales
ou distributeurs et leur demander la manière correcte de procéder.
Mises en garde réglementaires
Avant d’installer et d’utiliser le projecteur, veuillez lire les informations sur la réglementation
au chapitre « Respect de la réglementation » à la page 45.
4
Enregistrez votre produit planar aujourd’hui
Merci d’avoir choisi Planar. Pour être sûr de recevoir tous les services et béné ces et de
votre produit Planar enregistrez votre produit Planar aujourd’hui. Visitez notre site web:
http://www.planar.com/support/product_registation.html
Cables, lampes de remplacement et accessoires
Pour trouver des câbles, lampes de remplacement et des accessoires pour votre projecteur
Planar, moniteur LCD, ou tout autre produit Planar, visitez notre boutique en ligne:
http://www.PlanarOnlone.com ou trouvez d’autres points de vente de produits Planar
http://www.planar.com/howtobuy.
5
LISTE DU MATÉRIEL FOURNI
Déballer précautionneusement le projecteur et véri er que les éléments
suivants sont bien inclus.
DLP Projecteur
Télécommande du projecteur DLP
(avec deux piles AAA)
Adaptateur DVI vers HDMI
(PD4010 seulement)
Câble d’alimentation
(Suivant le pays)
Câble Vidéo
Composant
Guide d'Utilisation
Projecteur
PD4010
PD7010
PD7060
CD-ROM
(Ce Manuel d’utilisation)
Guide d’utilisation
Contactez votre fournisseur immédiatement si un élément est manquant, si un
élément semble endommagé, ou si l’appareil ne fonctionne pas.
6
FONCTIONS DE LA TÉLÉCOMMANDE
NUMÉRO ELÉMENT DESCRIPTION
1 Allumage Allume le projecteur
ON POWER OFF
1
23
45
SOURCE
2 Extinction Eteint le projecteur
3 Source 1 Con gurable par l’utilisateur
(Défaut: HDMI)
4 Source 2 Con gurable par l’utilisateur
(Défaut: Composant)
5 Source 3 Con gurable par l’utilisateur
(Défaut: DVI-D)
6 Source 4 Con gurable par l’utilisateur
(Défaut: PC)
7 Source 5 Con gurable par l’utilisateur
(Défaut: Video/S-Video)
8 Curseur
vers le haut
Navigue et modi e les paramètres
dans l’ASE
9 Curseur
vers la
gauche
10 Entrée Entrée Modi e les paramètres dans
l’ASE
11 Curseur
vers la
droite
Navigue et modi e les paramètres
dans l’ASE
12 Curseur
vers le bas
13 Sortie Sort des menus de l’ASE ou des
champs de sélections
14 Menu Ouvre l’ASE
15 Touche de
raccourci 1
Paramètre 1 mémorisé de
l’utilisateur
16 Touche de
raccourci 2
Paramètre 2 mémorisé de
l’utilisateur
17 Touche de
raccourci 3
Paramètre 3 mémorisé de
l’utilisateur
18 Contraste Contrôle le contraste de l’image
19 Luminosité Contrôle la luminosité de l’image
20 Rapports
d’af chage
Change le mode d’af chage: 16:9
Letterbox 4:3 Native
21 Gamma Change le gamma: Film Video
Cinéma PC Photo
22 Cadrage Change le cadrage: Sans Rogner
Zoom
23 Trapèze Con gurer le trapèze
24 Auto Synchronise automatiquement
l’af chage en mode RGB
25 Noir Rend l’écran noir
26 Voyant Allume et éteint le voyant lumineux
7
INSERTION DES PILES DE LA TÉLÉCOMMANDE
1.
Retirez le couvercle du
compartiment des piles en
glissant le couvercle dans la
direction de la èche,
2.
Insérez les piles fournies en
prenant garde à la polarité
(+/-) comme indiqué à côté.
3.
Replacez le couvercle.
MISE EN GARDE
1. Utilisez seulement des piles AAA alcalines.
2. Débarrassez-vous des piles usagées conformément à
la législation en vigueur.
3. Retirez les piles en cas de non utilisation prolongée du
projecteur
8
CONNEXION D’APPAREILS EN ENTRÉE
Un PC, un ordinateur portable ou des appareils vidéo peuvent être connectés
au projecteur en même temps. Les appareils vidéo incluent lecteurs VHS,
DVD et VCD, des caméra vidéo et des appareils photos numériques, et les
hautes sources de dé nition. Consultez le manuel d’utilisation de l’appareil
connecté pour véri er qu’il possède le bon connecteur.
ATTENTION
Comme précaution de sécurité, déconnectez toutes les
sources électriques du projecteur et des appareils con-
nectés avant de les brancher.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152

Planar PD4010 Manuale utente

Categoria
Proiettori di dati
Tipo
Manuale utente
Questo manuale è adatto anche per