Whirlpool AKZM 834 Manuale del proprietario

Marca: Whirlpool

Modello: AKZM 834

Categoria: Forni

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

AKZM 834/IX

User and maintenance manual

Manuale d’uso e manutenzione

Εγχείριδιο χρήσης και συντήρησης

AKZM 834

GB1

YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT

This manual and the appliance itself provide important safety warnings, to be read and observed at all times.

All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric

shock resulting from improper use of the appliance. Carefully observe the following instructions:

- The appliance must be disconnected from the power supply before carrying out any installation work.

- Installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer’s

instructions and local safety regulations. Do not repair or replace any part of the appliance unless specifically stated in the

user manual.

- Regulations require that the appliance is earthed.

- The power cable must be long enough for connecting the appliance, once fitted in its housing, to the power supply

socket.

- For installation to comply with current safety regulations, an all-pole disconnect switch with minimum contact gap of

3 mm must be utilized.

- Do not use multiple plug adapters or extension leads.

- Do not pull the power supply cable in order to unplug the appliance.

- The electrical components must not be accessible to the user after installation.

- Do not touch the appliance with any wet part of the body and do not operate it when barefoot.

- This appliance is designed solely for use as a domestic appliance for cooking food. No other type of use is permitted

(e.g.: heating rooms). The Manufacturer declines all responsibility for inappropriate use or incorrect setting of the controls.

- The appliance is not intended for use by persons (including children) with any physical, sensory or mental impairment, or

without experience and knowledge of the appliance, unless supervised or previously instructed in its use by those

responsible for their safety.

- The accessible parts of the appliance may become very hot during use. Young children should be kept away from the

appliance and supervised to ensure that they do not play with it.

- During and after use, do not touch the heating elements or interior surfaces of the appliance - risk of burns. Do not allow

the appliance to come into contact with cloths or other flammable materials until all the components have cooled

sufficiently.

- At the end of cooking, exercise caution when opening the appliance door, letting the hot air or steam exit gradually

before accessing the oven. When the appliance door is shut, hot air is vented from the aperture above the control panel.

Do not obstruct the vent apertures.

- Use oven gloves to remove pans and accessories, taking care not to touch the heating elements.

- Do not place flammable materials in or near the appliance: a fire may break out if the appliance is inadvertently switched

on.

- Do not heat or cook sealed jars or containers in the appliance. The pressure that builds up inside might cause the jar to

explode, damaging the appliance.

- Do not use containers made of synthetic materials.

- Overheated oils and fats catch fire easily. Always remain vigilant when cooking foods rich in fat and oil.

- Never leave the appliance unattended during food drying.

- If alcoholic beverages are used when cooking foods (e.g. rum, cognac, wine), remember that alcohol evaporates at high

temperatures. As a result, there is a risk that vapours released by the alcohol may catch fire upon coming into contact with

the electrical heating element.

Scrapping of household appliances

- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal

regulations. Before scrapping, cut off the power supply cable.

- For further information on the treatment, recovery and recycling of household electrical appliances, contact your

competent local authority, the collection service for household waste or the store where you purchased the appliance.

IMPORTANT SAFETY INSTRUCTIONS

This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.

All safety warnings are preceded by the danger symbol and the following terms:

DANGER

Indicates a hazardous situation which, if not avoided, will cause serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could cause serious injury.

GB2

After unpacking the oven, make sure that it has not been damaged during transport and that the oven door closes properly. In

the event of problems, contact the dealer or your nearest After-sales Service. To prevent any damage, only remove the oven

from its polystyrene foam base at the time of installation.

PREPARING THE HOUSING UNIT

• Kitchen units in contact with the oven must be heat resistant (min 90°C).

• Carry out all cabinet cutting work before fitting the oven in the housing and carefully remove all wood chips and sawdust.

• After installation, the bottom of the oven must no longer be accessible.

• For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.

ELECTRICAL CONNECTION

Make sure the power voltage specified on the appliance dataplate is the same as the mains voltage. The dataplate is on the front

edge of the oven (visible when the door is open).

• Power cable replacement (type H05 RR-F 3 x 1.5 mm

) must be carried out by a qualified electrician. Contact an

authorized service centre.

GENERAL RECOMMENDATIONS

Before use:

- Remove cardboard protection pieces, protective film and adhesive labels from accessories.

- Remove the accessories from the oven and heat it at 200° for about an hour to eliminate the smell and fumes from the

insulating materials and protective grease.

During use:

- Do not place heavy objects on the door as they could damage it.

- Do not cling to the door or hang anything from the handle.

- Do not cover the inside of the oven with aluminium foil.

- Never pour water into the inside of a hot oven; this could damage the enamel coating.

- Never drag pots or pans across the bottom of the oven as this could damage the enamel coating.

- Make sure that the electrical cables of other appliances do not touch hot parts of the oven or become trapped in the door.

- Do not expose the oven to atmospheric agents.

Disposal of packing material

The packing material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of the packing must

therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.

Scrapping the product

- This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment

(WEEE).

- By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

- The symbol on the product or on the accompanying documentation indicates that it should not be treated as

domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic

equipment.

Energy saving

- Only pre-heat the oven if specified in the cooking table or your recipe.

- Use dark lacquered or enamelled baking moulds as they absorb heat far better.

- This oven, which is intended to come into contact with foodstuffs, complies with European Regulation ( ) n.1935/2004 and

has been designed, manufactured and sold in conformity with the safety requirements of the “Low Voltage” directive 2006/

95/CE (which replaces 73/23/CEE and subsequent amendments), the protection requirements of “EMC” 2004/108/CE.

INSTALLATION

SAFEGUARDING THE ENVIRONMENT

DECLARATION OF CONFORMITY

GB3

The oven does not work:

• Check for the presence of mains electrical power and if the oven is connected to the electrical supply.

• Turn off the oven and restart it to see if the fault persists.

The door will not open:

• Turn off the oven and restart it to see if the fault persists.

• Important: during self-cleaning, the oven door will not open. Wait until it unlocks automatically (see paragraph “Cleaning

cycle of ovens with pyrolysis function”).

The electronic programmer does not work:

• If the display shows the letter “ ” followed by a number, contact your nearest After-sales Service. Specify in this case the

number that follows the letter “ ”.

Before calling the After-Sales Service:

1. See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide“.

2. Switch the appliance off and back on again it to see if the fault persists.

If after the above checks the fault still occurs, get in touch with the nearest After-sales Service.

Always specify:

• a brief description of the fault;

• the type and exact model of the oven;

• the service number (number after the word Service on the rating plate), located on the right hand edge of the oven cavity

(visible when the oven door is open). The service number is also indicated on the guarantee booklet;

• your full address;

• your telephone number.

If any repairs are required, please contact an authorised After-sales Service (to guarantee that original spare parts will be used

and repairs carried out correctly).

Oven exterior

IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with

the appliance, clean immediately with a damp cloth.

• Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off

with a dry cloth.

Oven interior

IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin enamelled surfaces

and the oven door glass.

• After every use, allow the oven to cool then clean it preferably while it is still warm in order to remove built-up dirt and

stains caused by food residues (e.g. food with a high sugar content).

• Use proprietary oven detergents and follow the manufacturer’s instructions to the letter.

• Clean the door glass with a suitable liquid detergent. The oven door can be removed to facilitate cleaning (see

MAINTENANCE).

• The top heating element of the grill (see MAINTENANCE) can be lowered (some models only) to clean the roof of the oven.

N.B.: during prolonged cooking of foods with a high water content (e.g. pizza, vegetables, etc.) condensation may form

on the inside of the door and around the seal. When the oven is cold, dry the inside of the door with a cloth or sponge.

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

CLEANING

WARNING

- Never use steam cleaning equipment.

- Only clean the oven when it is cool to the touch.

- Disconnect the appliance from the power supply.

GB4

Accessories:

• Soak the accessories in water with washing up detergent immediately after use, handling them with oven gloves if still

hot.

• Do not wash enamelled accessories in a dishwasher. The aggressive detergents normally used in dishwashers can damage

the enamel irreparably.

STARCLEAN cleaning cycle:

The surfaces of your oven cavity are covered with a special enamel which makes the oven easy to clean: simply use the sponge-

cloth provided and a little water. The cloth is washable and can be re-used until completely worn, after which a new cloth can

be purchased from our After-sales Service.

The cleaning cycle lasts 35 minutes, including the cooling phase after the elements have switched off.

REMOVING THE DOOR

To remove the door:

1. Open the door fully.

2. Lift the catches and push them forwards as far as they will go (Fig. 1).

3. Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (Fig. 2).

To refit the door:

1. Insert the hinges in their seats.

2. Open the door fully.

3. Lower the two catches.

4. Close the door.

MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)

1. Remove the side accessory holder grilles (Fig. 3).

2. Pull the heating element out a little (Fig. 4) and lower it (Fig. 5).

3. To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral

supports.

MAINTENANCE

WARNING

- Use protective gloves.

- Ensure the oven is cold before carrying out the following operations.

- Disconnect the appliance from the power supply.

Fig. 1 Fig. 2

Fig. 3 Fig. 4 Fig. 5

GB5

REPLACING THE OVEN LAMP

To replace the rear lamp (if present):

1. Disconnect the oven from the power supply.

2. Unscrew the lamp cover (Fig. 6), replace the lamp (see note for lamp type) and screw the lamp cover back on.

3. Reconnect the oven to the power supply.

To replace the side lamp (if present):

1. Disconnect the oven from the power supply.

2. Remove the side accessory holder grilles, if present (Fig. 3).

3. Use a screwdriver to prise off the lamp cover (Fig. 7).

4. Replace the lamp (see note for lamp type) (Fig. 8).

5. Reposition the lamp cover, pushing it on firmly until it snaps into place (Fig. 9).

6. Refit the side accessory holder grilles.

7. Reconnect the oven to the power supply.

N.B.:

- Only use 25-40W/230V type E-14, T300°C incandescent lamps, or 20-40W/230 V type G9, T300°C halogen lamps.

- Lamps are available from our After-sales Service.

IMPORTANT:

- If using halogen lamps, do not handle with bare hands since fingerprints can damage them.

- Do not use the oven until the lamp cover has been repositioned.

Fig. 6 Fig. 7 Fig. 8 Fig. 9

GB6

FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION

1. Control panel

2. Upper heating element/grill

3. Cooling fan (not visible)

4. Dataplate (not to be removed)

5. Light

6. Fan

7. Circular heating element (not visible)

8. Turnspit

9. Lower heating element (not visible)

10. Door

11. Position of shelves (the number of shelves is indicated on the front of the oven)

12. Rear wall

N.B.:

- During cooking, the cooling fan may switch on at intervals in order to minimise energy consumption.

- At the end of cooking, after the oven has been switched off, the cooling fan may continue to run for a while.

- When the oven door is opened during cooking, the heating elements switch off.

ACCESSORIES SUPPLIED

A. WIRE SHELF (2): the wire shelf can be used to grill food or as a support for pans, cake tins and other ovenproof cooking

receptacles.

B. DRIP TRAY (1): the drip tray is designed to be positioned under the wire shelf in order to collect fat or as an oven tray for

cooking meat, fish, vegetables, focaccia, etc.

C. TURNSPIT (1): for uniform roasting of large pieces of meat and poultry.

D. SPONGE-CLOTH (1): cloth made of pure cellulose for the Starclean cleaning cycle.

IMPORTANT: only use the sponge-cloth provided.

ACCESSORIES NOT SUPPLIED

Other accessories can be purchased separately from the After-sales Service.

INSTRUCTIONS FOR OVEN USE

Fig. A Fig. B Fig. C Fig. D

GB7

INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN

The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional removal.

1. Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).

2. Angle the wire shelf when it reaches the locking position “B” (Fig. 2).

3. Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. 3).

4. To remove the wire shelf proceed in reverse order.

The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface

enables the accessories to lock in place.

CONTROL PANEL DESCRIPTION

ELECTRONIC PROGRAMMER

1. FUNCTION SELECTOR KNOB: On/off and function selector knob

2. BROWSE KNOB: for browsing the menu and adjusting pre-set values

N.B.: the two knobs are retractable. Press the knobs in the middle and they pop up.

3. BUTTON : to return to the previous screen

4. BUTTON : to select and confirm settings

LIST OF FUNCTIONS

Turn the “Functions” knob to any position and the oven switches on: the display shows the functions or the associated

submenus.

The submenus are available and selectable by turning the knob to the functions GRILL, SPECIALS, SETTINGS, BREAD/PIZZA.

N.B.: for the list and description of functions, see the specific table at page 12.

Fig. 1

Fig. 2 Fig. 3

GB8

DESCRIPTION OF DISPLAY

A. Display of heating elements activated during the various cooking functions

B. Time management symbols: timer, cooking time, end of cooking time, time

C. Information regarding selected functions

D. Automatic BREAD/PIZZA function selected

E. Indication of door locked during automatic cleaning cycle (if present)

F. Internal oven temperature

G. Pyrolisis function (if present)

H. Browning

I. Special functions: defrosting, keep warm, rising

STARTING THE OVEN - SETTING THE TIME

After connecting the oven to the mains power, the time must be set on the clock. The two hour digits flash on the display.

1. Turn the “Browse” knob to display the correct hour.

2. Press the button to confirm; the two minute digits flash on the display.

3. Turn the “Browse” knob to display the correct minutes.

4. Press button to confirm.

To change the time, for example following a power cut, see the next paragraph (SETTINGS).

SELECTING COOKING FUNCTIONS

1. Turn the “Functions” knob to the desired function: the cooking settings are shown on the display.

2. If the values shown are those desired, press . To change them, proceed as indicated below.

SETTING THE TEMPERATURE/OUTPUT OF THE GRILL

To change the temperature or output of the grill, proceed as follows:

1. Turn the “Browse” knob to display the desired value.

2. Press button to confirm.

The oven automatically confirms your selection 10 seconds after the last operation.

B C D

I H G F

GB9

FAST PREHEATING

1. Turn the “Functions” knob to the symbol to select the fast preheating function.

2. Confirm by pressing : the settings are shown on the display.

3. If the proposed temperature is that desired, press button . To change the temperature, proceed as described in

previous paragraphs. The message PRE appears on the display. When the set temperature is reached, the corresponding

value (e.g. 200°C) appears on the display and the acoustic signal sounds. At the end of preheating, the oven automatically

selects the conventional function .

At this point food can be placed in the oven for cooking.

4. If you wish to set a different cooking function, turn the “Functions” knob and select the desired function.

SETTING COOKING TIME

This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by

the selected function, after which the oven switches off automatically.

1. Once the temperature is confirmed, the symbol flashes.

2. Turn the adjustment knob to display the desired cooking time.

3. To confirm the cooking time, press button .

The oven automatically confirms your selection 10 seconds after the last operation.

SETTING END OF COOKING TIME /START DELAYED

IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA,

CONVECTION BAKE.

N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly

longer than stated in the cooking table.

The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only

be done once cooking time has been set.

After setting cooking time, the display shows the end of cooking time (for example 15:45) and the symbol flashes.

To delay the end of cooking time, and thus also the cooking start time, proceed as follows:

1. Turn the “Browse” knob to display the time you wish cooking to end (for example 16:00).

2. Confirm the selected value by pressing button : the two dots of end of cooking time flash, indicating that the setting

has been made correctly.

3. The oven will automatically delay the start of cooking so as to finish cooking at the set time.

At any time, however, set values (temperature, grill setting, cooking time) can be changed using button to go back,

followed by the “Browse” knob to change values and button to confirm.

INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN (IF PRESENT)

If at the end of cooking, or when the oven is switched off, the temperature inside the oven is high, the display on some models

shows the message HOT together with the current temperature. Once the oven chamber has cooled down, the display shows

the current time again.

GB10

TIMER

This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta.

The maximum time which can be set is 23 hours and 59 minutes.

1. With the “Functions” knob at zero, turn the “Browse” knob to display the desired time.

2. Press button to start the countdown. When the set time has elapsed, the display will show “0:00” and an acoustic signal

will sound. To mute the acoustic signal, press button (the time of day appears on the display).

SELECTING SPECIAL FUNCTIONS

Turn the “Functions” knob indicator to the symbol to access a submenu containing three special functions.

To browse, select and start one of these functions, proceed as follows:

1. Turn the “Functions” knob to symbol : the display shows “ DEFROST” along with this function’s corresponding symbol.

2. Turn the “Browse” knob to scroll the list of functions; the function names are in English: DEFROST, KEEP WARM, RISING.

3. Press button to confirm.

BROWNING

At the end of cooking, with certain functions, the display indicates the possibility of browning. This function can only be used

when cooking time has been set.

At the end of cooking time, the display shows: “PRESS TO BROWN”. Press button , and the oven starts a 5 minute browning

cycle. This function can be selected consecutively a maximum of twice.

BREAD/PIZZA FUNCTION SELECTION

Turn the “Functions” knob indicator to the symbol to access a submenu containing two automatic cooking functions for

“bread” and “pizza”.

Bread

1. Turn the “Functions” knob to symbol : the display shows “BREAD” and AUTO at the side.

2. Press to select the function.

3. Turn the “Browse” knob to set the required temperature (between 180°C and 220°C) and confirm with button .

4. Turn the “Browse” knob to set the required cooking duration and press to start cooking.

Pizza

1. Turn the Functions knob to symbol : the display shows “BREAD”. To select the “PIZZA” function, proceed as follows:

2. Turn the “Browse” knob: “PIZZA” appears on the display.

3. Press to select the function.

4. Turn the “Browse” knob to set the required temperature (between 220°C and 250°C) and confirm with button .

5. Turn the “Browse” knob to set the required cooking duration and press to start cooking.

GB11

SETTINGS

Turn the “Functions” knob indicator to the symbol to access a submenu containing four display settings which can be

changed.

Clock

Turn the “Functions” knob to the symbol : the word CLOCK appears on the display. To change the time of day, see the

previous paragraph (SETTING THE TIME).

Eco

With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after the end of cooking.

To view information on the display, simply press a button or turn a knob.

1. Turn the “Browse” knob to display “ECO.

2. Press to access the setting (ON/OFF).

3. Turn the “Browse” knob to select the desired setting and confirm by pressing button .

Acoustic signal

To activate or deactivate the acoustic signal, proceed as follows:

1. Turn the “Browse” knob to display “SOUND.

2. Press to access the setting (ON/OFF).

3. Turn the “Browse” knob to select the desired setting and confirm by pressing button .

N.B.: when set to off, the following signals remain nonetheless active: timer end, preheating end, cooking end.

Brightness

To change the display brightness, proceed as follows:

1. Turn the “Browse” knob to display “BRIGHTNESS.

2. Press button : the display shows LOW, MID or HIGH depending on the level currently set.

3. Turn the “Browse” knob to increase or decrease brightness and confirm by pressing .

STARCLEAN CLEANING CYCLE

For the description of this function, see the chapter CLEANING and the functions table at page 12.

1. Start the cleaning cycle when the oven is cold.

2. Wet the sponge-cloth provided under running water and squeeze it out so that it does not drip.

3. Open the oven door and remove the enamelled accessories.

4. Open out the sponge cloth so that it completely covers the bottom of the oven and pour 350 ml of water evenly over the

cloth.

5. Close the oven door.

To start the function, proceed as follows:

1. Turn the functions knob to the symbol : the word STARCLEAN appears on the display.

2. Press the button to confirm your selection and start the cleaning cycle.

On completion of the cycle, open the door, remove the sponge-cloth and proceed to clean the oven using a non-abrasive

sponge dampened in lukewarm water and, if necessary, a few drops of neutral detergent.

To eliminate particularly stubborn marks, repeat the cycle and proceed with cleaning only once the oven has cooled down

completely.

KEY-LOCK

This function can be used to lock the buttons and knobs on the control panel.

To activate it, press and at the same time for at least 3 seconds. When activated, the functions associated with the buttons

are locked and the display shows a key symbol. This function can also be activated during cooking. To deactivate it, repeat the

above procedure. When the key-lock function is activated, the oven can be switched off by turning the knob to 0 (zero). In this

case, however, the previously selected function will have to be set again.

GB12

FUNCTION DESCRIPTION TABLE

FUNCTIONS KNOB

OFF To stop cooking and switch off the oven.

LAMP To switch the oven interior light on/off.

SPECIAL FUNCTIONS

DEFROST

To speed up defrosting of food. Place food on the middle shelf. Leave food in its packaging in

order to prevent it from drying out on the outside.

KEEP WARM

For keeping just-cooked food hot and crisp (e.g: meat, fried food or flans). Place food on the

middle shelf. The function will not activate if the temperature in the oven is above 65°.

RISING

For optimal rising of sweet or savoury dough. To safeguard the quality of proving, the function

will not activate if the temperature in the oven is above 40°C. Place the dough on the 2nd shelf.

The oven does not have to be preheated.

CONVENTIONAL

To cook any kind of dish on one shelf only. Use the 3rd shelf. To cook pizza, savoury pies and

sweets with liquid fillings, use the 1st or 2nd shelf. Preheat the oven before placing food inside.

CONVECTION BAKE

To cook meat and pies with liquid filling (savoury or sweet) on a single shelf. Use the 3rd shelf.

Preheat the oven before cooking.

FORCED AIR

To cook a variety of food requiring the same cooking temperature on two shelves at the same

time (e.g: fish, vegetables, cakes). This function can be used to cook different foods without

odours being transferred from one food to another. Use the 3rd shelf to cook on one shelf only.

To cook on two shelves, use the 1st and 4th shelves after preheating the oven.

GRILL

To grill steak, kebabs and sausages; to cook vegetables au gratin and toast bread. Place food on

the 4th or 5th shelf. When grilling meat, use the drip tray to collect the cooking juices. Position it

on the 3rd/4th shelf, adding approx. half a litre of water. The oven does not have to be

preheated. During cooking the oven door must remain closed.

TURBO GRILL

To roast large joints of meat (legs, roast beef, chickens). Position the food on the middle shelves.

Use the drip tray to collect the cooking juices. Position it on the 1st/2nd shelf, adding approx.

half a litre of water. The oven does not have to be preheated. During cooking the oven door

must remain closed. With this function you can also use the turnspit, if provided.

SETTINGS To set the display (time, brightness, buzzer volume, energy saving).

BREAD/PIZZA

To bake different types and sizes of pizza and bread. This function contains two programmes

with predefined settings. Simply indicate the values required (temperature and time) and the

oven will manage the cooking cycle automatically. Place the dough on the 2nd shelf after

preheating the oven.

STARCLEAN

To eliminate spatters produced during cooking with a low temperature cycle. The combined

action of the special enamel and water released by the sponge during the cycle facilitates

removal of dirt. Activate the function when the oven is cold.

FAST PREHEATING To preheat the oven rapidly.

GB13

COOKING TABLE

Recipe Function Preheating Shelf

(from bottom)

Temperature

(°C)

Time

(min)

Accessories

Leavened cakes

Yes 2 / 3 160-180 30-90 Cake tin on wire shelf

Yes 1-4 160-180 30-90

Shelf 4: cake tin on wire shelf

Shelf 1: cake tin on wire shelf

Filled pies (cheesecake,

strudel, fruit pie)

- 3 160-200 30-85

Drip tray/ baking tray or cake tin

on wire shelf

Yes 1-4 160-200 35-90

Shelf 4: cake tin on wire shelf

Shelf 1: cake tin on wire shelf

Biscuits/Tartlets

Yes 3 170-180 15-45 Drip tray / baking tray

Yes 1-4 160-170 20-45

Shelf 4: wire shelf

Shelf 1: drip tray / baking tray

Choux buns

Yes 3 180-200 30-40 Drip tray / baking tray

Yes 1-4 180-190 35-45

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Meringues

Yes 3 90 110-150 Drip tray / baking tray

Yes 1-4 90 130-150

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Bread / Pizza / Focaccia

Yes 1 / 2 190-250 15-50 Drip tray / baking tray

Yes 1-4 190-250 30-50

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Frozen pizza

Yes 3 250 10-15

Shelf 3: drip tray / baking tray or

wire shelf

Yes 1-4 250 10-20

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Savoury pies (vegetable

pie, quiche)

Yes 3 180-190 40-55 Cake tin on wire shelf

Yes 1-4 180-190 45-60

Shelf 4: cake tin on wire shelf

Shelf 1: cake tin on wire shelf

Vols-au-vent / Puff pastry

crackers

Yes 3 190-200 20-30 Drip tray / baking tray

Yes 1-4 180-190 20-40

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Lasagne / Baked pasta /

Cannelloni / Flans

Yes 3 190-200 45-55 Oven tray on wire shelf

Lamb / Veal / Beef / Pork

1Kg

Yes 3 190-200 80-110 Drip tray or oven tray on wire shelf

Chicken / Rabbit / Duck

1Kg

Yes 3 200-230 50-100 Drip tray or oven tray on wire shelf

Turkey / Goose 3 Kg Yes 2 190-200 80-130 Drip tray or oven tray on wire shelf

GB14

Baked fish / en papillote

(fillet, whole)

Yes 3 180-200 40-60 Drip tray or oven tray on wire shelf

Stuffed vegetables

(tomatoes, courgettes,

aubergines)

Yes 2 180-200 50-60 Oven tray on wire shelf

Toast - 5 High 3-5 Wire shelf

Fish fillets / steaks - 4 Medium 20-30

Shelf 4: wire shelf (turn food

halfway through cooking)

Shelf 3: drip tray with water

Sausages / Kebabs / Spare

ribs / Hamburgers

- 5 Medium - High 15-30

Shelf 5: wire shelf (turn food

halfway through cooking)

Shelf 4: drip tray with water

Roast chicken 1-1.3 Kg - 2

Medium 55-70

Shelf 2: wire tray (turn food two

thirds of the way through

cooking)

Shelf 1: drip tray with water

High 60-80

Shelf 2: Turnspit

Shelf 1: drip tray with water

Roast Beef rare 1Kg - 3 Medium 35-45

Oven tray on wire shelf (turn food

two thirds of the way through

cooking if necessary)

Leg of lamb / Shanks - 3 Medium 60-90

Drip tray or oven tray on wire shelf

(turn food two thirds of the way

through cooking if necessary)

Roast potatoes - 3 Medium 45-55

Drip-tray / baking tray (if

necessary, turn food two thirds of

the way through cooking)

Vegetable gratin - 3 High 10-15 Oven tray on wire shelf

Lasagna & Meat Yes 1-4 200 50-100

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray or oven tray on

wire shelf

Meat & Potatoes Yes 1-4 200 45-100

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray or oven tray on

wire shelf

Fish & Vegetables Yes 1-4 180 30-50

Shelf 4: oven tray on wire shelf

Shelf 1: drip tray or oven tray on

wire shelf

Recipe Function Preheating Shelf

(from bottom)

Temperature

(°C)

Time

(min)

Accessories

GB15

Table of Tested Recipes (in compliance with IEC 60350:99+A1:05 +A2:08 and DIN 3360-12:07:07)

The cooking table advises the ideal function and cooking temperature to ensure the best results with all recipes. For hot air

cooking on a single level, it is advisable to use the third shelf and the same temperature suggested for “CONVECTION BAKE”

cooking on several levels.

When grilling food, leave a space of 3-4 cm at the front to facilitate removal from the oven.

Recipe Function Preheating Shelf

(from bottom)

Temperature

(°C)

Time

(min)

Accessories and notes

IEC 60350:99+A1:05 +A2:08 § 8.4.1

Shortbread

Yes 3 170 15-25 Drip tray / baking tray

Yes 1-4 160 20-30

Shelf 4: baking tray

Shelf 1: drip tray

IEC 60350:99+A1:05 +A2:08 § 8.4.2

Small cakes

Yes 3 170 20-30 Drip tray / baking tray

Yes 1-4 160 30-40

Shelf 4: baking tray

Shelf 1: drip tray

IEC 60350:99+A1:05 +A2:08 § 8.5.1

Fatless sponge cake Yes 2 170 25-35 Cake tin on wire shelf

IEC 60350:99+A1:05 +A2:08 § 8.5.2

Two apple pies

Yes 2 / 3 185 55-75 Cake tin on wire shelf

Yes 1-4 175 75-95

Shelf 4: cake tin on wire shelf

Shelf 1: cake tin on wire shelf

IEC 60350:99+A1:05 +A2:08 § 9.1.1

Toast - 5 High 3-5 Wire shelf

IEC 60350:99+A1:05 +A2:08 § 9.2.1

Burgers - 5 High 20-30

Shelf 5: wire shelf (turn food

halfway through cooking)

Shelf 4: drip tray with water

DIN 3360-12:07 § 6.5.2.3

Apple cake, yeast tray cake

Yes 3 180 30-40 Drip tray / baking tray

Yes 1-4 160 55-65

Shelf 4: baking tray

Shelf 1: drip tray

DIN 3360-12:07 § 6.6

Roast Pork - 3 190 150-170

Shelf 3: wire shelf

Shelf 2: drip tray with water (top

up when necessary)

DIN 3360-12:07 annex C

Flat cake

Yes 3 170 35-45 Drip tray / baking tray

Yes 1-4 170 40-50

Shelf 4: baking tray

Shelf 1: drip tray

GB16

How to read the cooking table

The table indicates the best function to use for any given food, to be cooked on one or more shelves at the same time. Cooking

times start from the moment food is placed in the oven, excluding preheating (where required). Cooking temperatures and

times are purely for guidance and will depend on the amount of food and type of accessory used. Use the lowest recommended

values to begin with and, if the food is not cooked enough, then move on to higher values. Use the accessories supplied and

preferably dark coloured metal cake tins and oven trays. You can also use pans and accessories in pyrex or stoneware, but bear

in mind that cooking times will be slightly longer. To obtain best results, carefully follow the advice given in the cooking table

for the choice of accessories (supplied) to be placed on the various shelves.

Cooking different foods at the same time

Using the “CONVECTION BAKE” function, you can cook different foods which require the same cooking temperature at the same

time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave

food which requires longer cooking time in the oven.

Desserts

- Cook delicate desserts with the conventional function on one shelf only. Use dark coloured metal cake tins and always

position them on the wire shelf supplied. To cook on more than one shelf, select the forced air function and stagger the

position of the cake tins on the shelves, aiding optimum circulation of the hot air.

- To check whether a raising cake is cooked, insert a wooden toothpick into the centre of the cake. If the toothpick comes

out clean, the cake is ready.

- If using non-stick cake tins, do not butter the edges as the cake may not rise evenly around the edges.

- If the cake “sinks” during cooking, set a lower temperature the next time, perhaps reducing the amount of liquid in the

mixture and mixing more gently.

- For sweets with moist fillings (cheesecake or fruit pies) use the “CONVECTION BAKE” function”. If the base of the cake is

soggy, lower the shelf and sprinkle the bottom of the cake with breadcrumbs or biscuit crumbs before adding the filling.

Meat

- Use any kind of oven tray or pyrex dish suited to the size of the piece of meat being cooked. For roast joints, it is best to

add some stock to the bottom of the dish, basting the meat during cooking for added flavour. When the roast is ready, let

it rest in the oven for another 10-15 minutes, or wrap it in aluminium foil.

- When you want to grill meat, choose cuts with an even thickness all over in order to achieve uniform cooking results. Very

thick pieces of meat require longer cooking times. To prevent the meat from burning on the outside, lower the position of

the wire shelf, keeping the food farther away from the grill. Turn the meat two thirds of the way through cooking.

To collect the cooking juices it is advisable to place a drip-tray with half a litre of water directly under the grill on which the meat

is placed. Top-up when necessary.

Turnspit

Use this accessory to evenly roast large pieces of meat and poultry. Place the meat on the turnspit rod, tying it with string if

chicken, and check that it is secure before inserting the rod in the seat located on the front wall of the oven and resting it on the

respective support. To prevent smoke and to collect cooking juices, it is advisable to place a drip-tray with half a litre of water on

the first level. The rod has a plastic handle which must be removed before starting to cook, and used at the end of cooking to

avoid burns when taking the food out of the oven.

Pizza

Lightly grease the trays to ensure the pizza has a crispy base. Scatter the mozzarella over the pizza two thirds of the way through

cooking.

Rising function

It is always best to cover the dough with a damp cloth before placing it in the oven. Dough proving time with this function is

reduced by approximately one third compared to proving at room temperature (20-25°C). Proving time for a 1 Kg batch of pizza

dough is around one hour.

RECOMMENDED USE AND TIPS

IT17

LA SICUREZZA VOSTRA E DEGLI ALTRI È MOLTO IMPORTANTE

Il presente manuale e l’apparecchio stesso sono corredati da importanti messaggi relativi alla sicurezza, da leggere ed osservare

sempre.

Tutti i messaggi relativi alla sicurezza specificano il potenziale pericolo a cui si riferiscono ed indicano come ridurre il rischio di

lesioni, danni e scosse elettriche conseguenti ad un non corretto uso dell’apparecchio. Attenersi scrupolosamente alle seguenti

istruzioni:

- L’apparecchio deve essere scollegato dalla rete elettrica prima di effettuare qualunque intervento d’installazione.

- L’installazione o la manutenzione deve essere eseguita da un tecnico specializzato, in conformità alle istruzioni del

fabbricante e nel rispetto delle norme locali vigenti in materia di sicurezza. Non riparare o sostituire qualsiasi parte

dell’apparecchio se non specificamente richiesto nel manuale d’uso.

- La messa a terra dell’apparecchio è obbligatoria.

- Il cavo di alimentazione deve essere sufficientemente lungo da permettere il collegamento dell’apparecchio, incassato nel

mobile, alla presa di rete.

- Affinché l’installazione sia conforme alle norme di sicurezza vigenti, occorre un interruttore onnipolare avente una

distanza minima di 3 mm. tra i contatti.

- Non utilizzare prese multiple o prolunghe.

- Non tirare il cavo di alimentazione dell’apparecchio per staccarlo dalla presa di corrente.

- Una volta terminata l’installazione, i componenti elettrici non dovranno più essere accessibili dall’utilizzatore.

- Non toccare l’apparecchio con parti del corpo umide e non utilizzarlo a piedi nudi.

- L’apparecchio è destinato esclusivamente ad uso domestico per la cottura di alimenti. Non sono consentiti altri usi (es.

riscaldare ambienti). Il fabbricante declina ogni responsabilità per usi non appropriati o per errate impostazioni dei

comandi.

- L’utilizzo dell’apparecchio non è consentito alle persone (inclusi i bambini) con ridotte capacità fisiche, sensoriali o

mentali, o con mancanza di esperienza o conoscenza, a meno che non abbiano avuto istruzioni riguardanti l’uso

dell’apparecchio da parte di persone responsabili della loro sicurezza.

- Le parti accessibili possono diventare molto calde durante l’uso. I bambini devono essere mantenuti a distanza e

sorvegliati affinchè non giochino con l’apparecchio.

- Durante e dopo l’uso non toccare gli elementi riscaldanti o le superfici interne dell’apparecchio perché possono causare

ustioni. Evitare il contatto con panni o altro materiale infiammabile fino a che tutti i componenti dell’apparecchio non si

siano sufficientemente raffreddati.

- A fine cottura, aprire la porta dell’apparecchio con cautela, facendo uscire gradualmente l’aria calda o il vapore prima di

accedere al suo interno. Con la porta dell’apparecchio chiusa, la fuoriuscita dell’aria calda avviene dall’apertura posta al di

sopra del pannello comandi. Non ostruire in nessun caso le aperture di ventilazione.

- Usare guanti da forno per rimuovere pentole e accessori facendo attenzione a non toccare gli elementi riscaldanti.

- Non riporre materiale infiammabile nell’apparecchio o nelle sue vicinanze. Se l’apparecchio dovesse essere messo in

funzione inavvertitamente, potrebbe incendiarsi.

- Non riscaldare o cuocere nell’apparecchio cibi in barattoli chiusi. La pressione che si sviluppa all’interno potrebbe far

scoppiare il barattolo, danneggiando l’apparecchio.

- Non usare recipienti in materiale sintetico.

- I grassi e gli oli surriscaldati prendono facilmente fuoco. Sorvegliare la cottura di alimenti ricchi di grasso e di olio.

- Non lasciare mai l’apparecchio incustodito durante l’essiccazione dei cibi.

- Se nel cuocere cibi si aggiungono bevande alcoliche (ad es. rum, cognac, vino), tenere presente che l’alcool evapora a

temperature elevate. Non è quindi escluso che i vapori generati possano infiammarsi giungendo a contatto con la

resistenza elettrica.

Smaltimento elettrodomestici

- Questo prodotto è stato fabbricato con materiale riciclabile o riutilizzabile. Rottamarlo seguendo le normative locali per lo

smaltimento dei rifiuti. Prima di disfarsene, renderlo inutilizzabile tagliando il cavo di alimentazione.

- Per ulteriori informazioni sul trattamento, recupero e riciclaggio degli elettrodomestici, contattare l’idoneo ufficio locale, il

servizio di raccolta dei rifiuti domestici o il negozio presso il quale il prodotto è stato acquistato.

ISTRUZIONI IMPORTANTI PER LA SICUREZZA

Questo è il simbolo di pericolo, relativo alla sicurezza, il quale avverte dei potenziali rischi per l’utilizzatore e per gli altri.

Tutti i messaggi relativi alla sicurezza saranno preceduti dal simbolo di pericolo e dai seguenti termini:

PERICOLO

Indica una situazione pericolosa che, se non evitata, provoca lesioni gravi.

AVVERTENZA

Indica una situazione pericolosa che, se non evitata, potrebbe provocare lesioni gravi.

IT18

Dopo aver disimballato il forno verificare che non si sia danneggiato durante il trasporto e che la porta si chiuda perfettamente.

In caso di problemi, contattare il rivenditore o il Servizio Assistenza Clienti. Per prevenire eventuali danni, si consiglia di

rimuovere il forno dalla base in polistirolo soltanto prima dell’installazione.

PREDISPOSIZIONE DEL MOBILE PER INCASSO

• I mobili della cucina adiacenti al forno devono resistere al calore (min 90°C).

• Eseguire tutti i lavori di taglio del mobile prima di inserire il forno e rimuovere accuratamente trucioli o residui di segatura.

• La parte inferiore del forno non deve più essere accessibile dopo l’installazione.

• Per un corretto funzionamento del prodotto non ostruire l’apertura minima tra piano di lavoro e il lato superiore del forno.

CONNESSIONE ALLA RETE ELETTRICA

Controllare che la tensione indicata sulla targhetta matricola del prodotto sia la stessa della rete elettrica. Essa si trova sul bordo

anteriore del forno (visibile quando la porta è aperta).

• Eventuali sostituzioni del cavo di alimentazione (tipo H05 RR-F 3 x 1,5 mm

) devono essere effettuate unicamente da

personale qualificato. Rivolgersi ai centri di assistenza autorizzati.

RACCOMANDAZIONI GENERALI

Prima dell’utilizzo:

- Rimuovere protezioni di cartone, pellicole trasparenti ed etichette adesive dagli accessori.

- Togliere gli accessori dal forno e riscaldarlo a 200° per un’ora circa in modo da eliminare odori e fumi derivanti da

materiale isolante e grassi di protezione.

Durante l’utilizzo:

- Non appoggiare pesi sulla porta in quanto essi potrebbero danneggiarla.

- Non aggrapparsi alla porta o appendere oggetti alla maniglia.

- Non ricoprire l’interno del forno con fogli di alluminio.

- Non versare mai acqua all’interno del forno caldo; lo smalto potrebbe danneggiarsi.

- Non trascinare sul fondo del forno pentole o tegami per non rovinare lo smalto.

- Accertarsi che i cavi elettrici di altri apparecchi non vadano a toccare le parti calde del forno o ad incastrarsi nella porta.

- Non esporre il forno agli agenti atmosferici.

Smaltimento imballaggio

Il materiale di imballaggio è riciclabile al 100% ed è contrassegnato dal simbolo di riciclaggio ( ). Le diverse parti

dell’imballaggio non devono essere disperse nell’ambiente, ma smaltite in conformità alle norme stabilite dalle autorità locali.

Smaltimento prodotto

- Questo apparecchio è contrassegnato in conformità alla Direttiva Europea 2002/96/EC, Waste Electrical and Electronic

Equipment (WEEE).

- Assicurandosi che questo prodotto sia smaltito in modo corretto, l’utente contribuisce a prevenire le potenziali

conseguenze negative per l’ambiente e la salute.

- Il simbolo sul prodotto o sulla documentazione di accompagnamento indica che questo prodotto non deve essere

trattato come rifiuto domestico, ma deve essere consegnato presso l’idoneo punto di raccolta per il riciclaggio di

apparecchiature elettriche ed elettroniche.

Risparmio energetico

- Preriscaldare l’apparecchio solo se indicato nella tabella di cottura o nella vostra ricetta.

- Usare stampi da forno scuri, laccati o smaltati, perché assorbono molto meglio il calore.

- Questo apparecchio, destinato ad entrare a contatto con prodotti alimentari, è conforme al regolamento ( ) n.1935/

2004 ed è stato progettato, costruito ed immesso sul mercato in conformità ai requisiti di sicurezza della direttiva “Bassa

Tensione”2006/95/CE (che sostituisce la 73/23/CEE e successivi emendamenti), requisiti di protezione della direttiva

“EMC” 2004/108/CE.

INSTALLAZIONE

CONSIGLI PER LA SALVAGUARDIA DELL’AMBIENTE

DICHIARAZIONE DI CONFORMITÀ

La pagina sta caricando ...

Whirlpool AKZM 834 Manuale del proprietario

Marca: Whirlpool

Modello: AKZM 834

Categoria: Forni

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

AKZM 834/IX

Scarica il pdf

rapporto

in altre lingue

English: Whirlpool AKZM 834 Owner's manual

Documenti correlati

Altri documenti

Gorenje BO73ORAX Manuale utente