E
PM1D Manager for Windows
Operating manual
PM1D Manager for Windows Operating manual
2
Contents
About the “PM1D Manager for Windows operating manual” . . . . . . . . . . . . . . . . . . . . . . 3
Conventions in the “PM1D Manager for Windows operating manual” . . . . . . . . . . . . . . . 3
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing PM1D Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Uninstalling PM1D Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Exiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Initialization procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Screens unique to PM1D Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Upper part of the display (common to all screens) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Lower part of the display (common to all screens). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Lower part of the function menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Communication between PM1D Manager and the console/engine . . . . . . . . . . . . . . . . . 10
System connection examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Data communication method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Online operating procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Offline operating procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cautions regarding data communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Special considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
USB MIDI Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Windows 98 & 98SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Windows Me. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
About the specifications of this software
Specifications of this software and the material given in this manual are subject to change without notice.
Copyright
Copying or distributing this software and/or this manual in part or in whole using any method without the
written permission of Yamaha Corporation is prohibited.
Tr ademarks
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Pentium II is a registered trademark of Intel Corporation.
Compact Flash™ is a trademark of SanDisk Corporation.
Other company names and product names are trademarks and registered trademarks of their respective own-
ers. Symbols such as ® and TM are not explicitly given in this document.
The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and may
appear somewhat different from those on your instrument.
About the “PM1D Manager for Windows operating manual”
3
About the “PM1D Manager for Windows operating manual”
PM1D Manager for Windows (subsequently referred to
as “PM1D Manager”) is an application program that
runs on a computer running Microsoft Windows (subse-
quently referred to as the “PC”), providing the same
operating environment as the software of the CS1D
(subsequently referred to as the “console”).
By using PM1D Manager, you can create various types of
settings even when you are away from the console, and
use a memory card (*) or other means to load settings
into the console at a later time. In addition, you can con-
nect the console/engine (DSP1D-EX {DSP1D}) to your
PC, and use it to control the entire system in the same
way as from the console.
This manual explains only items that are specific to
PM1D Manager; how to install the program, how to
connect your PC to the console/engine, and functional
limitations of operations from the PC.
For details on basic operation in each screen, please refer
to the “CS1D Reference Manual (Software)” contained
in the CS1D Owner’s Manual.
For details on terminology and basic operation for Win-
dows, please refer to the manual or Help files included
with Windows.
*For details on the memory cards that can be used, refer to
“CS1D Operation Manual (Basic Operation)” p.144, and
“CS1D Reference Manual (Hardware)” p.80 contained in
the CS1D Owner’s Manual.
Conventions in the “PM1D Manager for Windows operating manual”
•
Distinguishing between the controls of the console
and the knobs/buttons of the software
The names of controls on the console (switches,
encoders) are enclosed in square brackets [ ] in order
to distinguish them from the knobs and buttons that
are displayed by the software.
Example: This is the same function as the DIRECT
RECALL [1]–[12] switches in the SCENE MEM-
ORY block of the console.
•
Va r ious icons
The left icon is used to indicate tips and ref-
erence pages.
Particularly important items or operations
you must use with care are marked by the
left icon.
System requirements
The following system is required in order to start up PM1D Manager.
•
An IBM PC/AT compatible computer with at least a
Pentium II 233 Mhz or equivalent CPU (Pentium II
350 Mhz or faster is recommended)
•
64 MB or more memory (128 MB or more is recom-
mended)
•
Supported operating systems:
Microsoft Windows 95 OSR2 or later / Microsoft
Windows 98 / Microsoft Windows 98 Second Edition
/ Microsoft Windows Me / Microsoft Windows NT
4.0 Service Pack 6a or later / Microsoft Windows
2000 / Microsoft Windows XP Home Edition /
Microsoft Windows XP Professional
*Microsoft Windows NT 3.51 and earlier versions
are not supported
* USB connection cannot be used in Microsoft
Windows 95 OSR2 / Microsoft Windows NT 4.0
•
Internet Explorer 4.0 or later must be installed
•
A display system with resolution of at least 800 x 600
pixels and 16 bit color (SVGA, High Color)
•
Hard disk free area of 10 MB or more
•
Mouse or other pointing device
•
CD-ROM drive
•
Serial port or USB port
*You will need an RS-232-C cable (cross-wired)
not exceeding 5 meters, or a USB cable not
exceeding 3 meters.
•
An ATA compatible PC CARD slot / CF (Compact
Flash) slot, or a PC CARD / CF card reader
Depending on your system and OS, a higher level of
performance may be required. A higher level of per-
formance may also be required if you are using a
notebook PC.
Hint
PM1D Manager for Windows Operating manual
4
Installing PM1D Manager
This section explains how to install the PM1D Manager program.
If an older version of PM1D Manager is already
installed, you must first uninstall it. (For the unin-
stallation procedure, refer to p.5.)
Before you begin the installation, you must exit all
applications and memory-resident programs.
1. Insert the “PM1D SYSTEM SOFTWARE” CD-ROM
into your CD-ROM drive, and open the CD-ROM
drive from “My Computer.”
The actual display will depend on your PC system.
2. Inside the “WIN” folder, double-click the “Setup”
icon.
The opening screen of the installer will appear.
Depending on your PC system, you may be asked to
restart the system during the installation process. If
so, installation will continue automatically after
you restart.
3. As directed by the instructions on the screen, click
the “Next” button as needed to proceed to the next
step.
4. When the “Select Installation Folder” screen
appears, click the Browse button if necessary, spec-
ify the installation folder, and proceed to the next
step.
Before you install the software, you must read the license agreement (licence_e.txt) found on the
“PM1D SYSTEM SOFTWARE” CD-ROM. You may use the software on the CD-ROM only if you
accept the terms of this license agreement.
Uninstalling PM1D Manager
5
Continue following the on-screen instructions, and
installation will be completed.
When installation is complete, a shortcut icon will be
added to the Start menu and to the desktop.
Uninstalling PM1D Manager
There are two ways to uninstall PM1D Manager.
■
Using “Add or remove an application”
1. From the Windows “Start” menu, select “Start”-
“Settings”-“Control Panel.”
2. When the Control Panel opens, double-click the
“A dd or remove applications” icon.
3. Select the “PM1D Manager” item, and click “Add or
remove.”
PM1D Manager and related files will be deleted from
the hard disk. (For details on the procedure, refer to
your Windows manual.)
■
Using Setup.exe
1. Perform steps 1–3 of “Installing PM1D Manager.”
A screen will appear asking you to select either
“Repair PM1D Manager” or “Remove PM1D Man-
ager.”
2. Check the “Remove PM1D Manager” button, and
click the “Finish” button.
The software will be uninstalled.
If you selected Repair PM1D Manager, the software
will not be removed.
PM1D Manager for Windows Operating manual
6
Using the application
This section explains how to start and exit PM1D Manager, and how to perform basic operations.
Starting
You can use either of the following methods to start up PM1D Manager.
1
From the Windows “Start” menu, select “Start”-
“Programs”-“YAMAHA PM1D System”-“PM1D
Manager”
2
Double-click the PM1D Manager icon that was cre-
ated during the installation.
It is not possible for multiple instances of PM1D
Manager to be running simultaneously.
Hint
You may find it convenient to set your screen display
resolution to 800 x 600, since PM1D Manager can
start up in full-screen display mode. However in this
case, the menu bar will not be displayed.
Exiting
You can use any of the following methods to exit PM1D Manager.
1
In the lower left of the Function menu screen, click
the EXIT button.
2
Open the “File” menu and select “Exit.”
3
Click the “Close” button of the window.
4
Select “Close” from the “PM1D Manager” button in
the task bar.
5
Press Alt+F4 from the keyboard.
A popup window will ask you to confirm that you
want to exit. To exit the application, click the OK
button.
If you are using PM1D Manager with an 800
×
600
pixel display, methods
2
–
4
cannot be used.
Hint
The next time PM1D Manager is started up, the state
in which you exited will automatically be restored.
Basic operation
Operation in each screen is the same as on the console
itself. Refer to “CS1D Reference Manual (Software)”
contained in the CS1D Owner’s Manual. Mention of the
console’s track pad should be read as referring to the
mouse/pointing device of your PC.
Using the application
7
Initialization procedure
If you want to initialize all current settings of the PM1D
Manager and its scene memories and libraries, you can
use the following procedure to restore the factory-set
condition.
1. In the Function menu screen, click the OPTION
button.
The Option settings popup window will appear.
2. According to the content that you want to initialize,
click either the “Initialize All Memories” button or
the “Initialize Current Memories” button.
•
If you click the “Initialize All Memories” button
The current settings of the PM1D Manager, as well as
the scene memories and the various libraries will be
initialized to the factory-set condition.
•
If you click the “Initialize Current Memories” but-
ton
The current settings of the PM1D Manager will be
initialized. However, scene memories and the various
libraries will not be affected.
When you press either of these buttons, a dialog box
will appear, asking you to confirm the initialization.
3. To execute the initialization, click the OK button.
Memories that have been initialized cannot be
recovered. Please use great care when performing
this operation.
Memory initialization can be performed only when
offline.
Hint
For details on the Option popup window, refer to the
explanation on p.9.
PM1D Manager for Windows Operating manual
8
Screens unique to PM1D Manager
This section explains the screens that differ from the console and are unique to PM1D Manager.
Upper part of the display (common to all screens)
1
Connection status
This area of the PM1D Manager screen will indicate
the status of the connection between the PC and con-
sole or engine.
•
........... Indicates that a cable is con
-
nected between the console/
engine and the PC, but
communication has not
been established.
•
...........Indicates that a cable is con
-
nected between the console/
engine and the PC, and that
communication has been
established. In this state, the
PM1D system can be con-
trolled from the PC.
•
...........Indicates that either the
cable is not connected, or
that the other device is not
powered-on.
2
Connection destination / connection method
The connector (COM port name or USB port name)
that is selected in the Communication Port (Option
menu) of Communication Setup.
Lower part of the display (common to all screens)
1
RECALL button / MUTE button
Select the function of the DIRECT RECALL/MUTE
MASTER 1–12 buttons (
2
) from the following two
choices.
•
DIRECT RECALL
You can use the DIRECT RECALL/MUTE MAS-
TER 1–12 buttons to directly recall the scenes
assigned to direct recall numbers 1–12. For details
on how to assign a scene to a direct recall number,
refer to “CS1D Reference Manual (Software)” con-
tained in the CS1D Owner’s Manual.
•
MUTE MASTER
You can use the DIRECT RECALL/MUTE MAS-
TER 1–12 buttons to turn muting on/off for mute
groups 1–12.
Hint
These two buttons have the same function as the
MODE button in the MUTE GROUP ASSIGN
screen of the IN DCA/MUTE function and OUT
DCA/MUTE function, and the MODE button in the
DIRECT RECALL screen of the SCENE function.
2
DIRECT RECALL/MUTE MASTER 1–12 buttons
Depending on the setting of the RECALL button /
MUTE button (
1
), these buttons function either as
direct recall or mute master buttons.
These have the same function as the DIRECT
RECALL [1]–[12] switches in the SCENE MEMORY
block of the console.
21
21
Screens unique to PM1D Manager
9
Lower part of the function menu
1 EXIT button
This button exits the PM1D Manager application.
This button has the same result as selecting “Exit”
from the “File” menu in the menu bar, or clicking the
“Close” button in the upper right of the PM1D Man-
ager window.
2 OPTION button
This button is used to make communication-related
settings or to initialize the memory. When you click
this button, the Option popup window will appear.
1 Communication Setup
• Communication Port
From the pulldown menu, select the port that
will be used for communication.
• Meter Request
Select whether the meter movements displayed in
various screens of the console will also be dis-
played in PM1D Manager. If this is turned ON,
the console’s meter movements can also be
viewed in PM1D Manager.
• Please be aware that if Meter Request is turned
ON, the communication load will be higher.
•Depending on the PC system you are using and
on the frequency of operations on the console,
the load may exceed the allowable limit, causing
communication with the PC to be terminated for
safety’s sake, and placing PM1D Manager offline.
If this occurs, turning Meter Request OFF may
solve the problem.
•If you do not require meter display, we recom-
mend that you turn Meter Request OFF.
2 Memory Setup
Here you can reset the current PM1D Manager
settings and memories/libraries to the condition
in which they were immediately following instal-
lation. Each button has the following function.
• Initialize All Memories button
When you click this button, the current settings
of the PM1D Manager as well as the scene memo-
ries and the various libraries will all be initialized
to the factory-set condition.
• Initialize Current Memories button
When you click this button, the current settings
of the PM1D Manager will be initialized. (How-
ever, the scene memories and the various libraries
will not be affected.) The following data will be
initialized.
•Current scene settings
•Current unit settings
•Current patch settings
•Name assigned in the NAME function of each
function
•Setup data (internal parameters not stored in
the scene)
Memory initialization can be performed only
when offline.
3 OK button
When you click this button, the settings that you
modified in Communication Setup will be final-
ized, and the popup window will close.
4 CANCEL button
When you click this button, the settings that you
modified in Communication Setup will be dis-
carded, and the popup window will close.
3 ONLINE/OFFLINE button
This button initiates or terminates communication.
When the button is on, PM1D Manager is online.
When the button is off, PM1D Manager is offline.
If the console/engine and the PC are not connected
by a cable, or if communication is not possible
because the communication settings are inappropri-
ate, the button will be grayed, and cannot be clicked.
4 ABOUT button
This button accesses a popup window that displays
the PM1D Manager version number and other infor-
mation about the software.
1 2 3 4
2
1
3
4
PM1D Manager for Windows Operating manual
10
Communication between PM1D Manager and the console/engine
If you connect the console/engine and the PC, you can use PM1D Manager as a supplementary controller for
the system.
• “Online” refers to a state in which the console/
engine and the PC are connected by a cable, and data
can be transferred to control the device immediately.
• “Offline” refers to a state in which the console/
engine and the PC are not connected by a cable and
therefore are unable to communicate, or a state in
which the cable is connected but communication has
not begun.
In the online state, parameters (with some excep-
tions) will be linked between the console/engine and
the PC, allowing PM1D Manager to monitor the
state of the system, operate it remotely, and act as a
substitute in the event of device failure. The material
that follows will explain various ways of setting up
the system, and how data communications can be
established and terminated.
System connection examples
■ Example 1: Standard mode (connect the PC
to the console)
Console×1, Engine×1
■ Example 2: Standard mode (connect the PC
to the engine)
■ Example 3: Mirror mode (connect the PC to
the console)
Console×1, Engine×2 (mirror mode)
■ Example 4: Mirror mode (connect the PC to
the engine)
Console×1, Engine×2 (mirror mode)
• The PC can only be connected to the engine that is
selected in Mirror mode. In this example, ENGINE A
is used.
• The PC can only be connected to the engine that is
selected in Mirror mode. In this example, ENGINE B
is used.
■ Example 5: Normal mode (connect the PC to
the engine)
Engine×1
• Only one PC can be connected to a system. It is
not possible to connect multiple PC’s to a system.
•Depending on the device to which the PC is con-
nected, or depending on the structure of the sys-
tem, the functionality of PM1D Manager may be
partially limited. For details, refer to “PC connec-
tions in a system that includes a console”
(→p.16).
CONSOLE
(CS1D)
ENGINE
(DSP1D)
CONSOLE
(CS1D)
ENGINE
(DSP1D)
CONSOLE
(CS1D)
ENGINE A
(DSP1D)
ENGINE B
(DSP1D)
CONSOLE
(CS1D)
ENGINE A
(DSP1D)
ENGINE B
(DSP1D)
CONSOLE
(CS1D)
ENGINE A
(DSP1D)
ENGINE B
(DSP1D)
ENGINE
(DSP1D)
Communication between PM1D Manager and the console/engine
11
■ System example 6: Dual Console mode
•You can connect and use either PC1 or PC2 (not both).
•Even if a PC is connected to console 2, it cannot be used.
■ System example 7: Cascade connection
•You can connect and use either PC1 or PC2 (not both), and PC3 or PC4 (not both).
•Even if there is no console, just an engine and PC can be used as a system.
Console1
(CS1D)
PC1
Engine
(DSP1D)
Console2
(CS1D)
PC2
PC1
Engine
(DSP1D)
PC2
Engine
(DSP1D)
PC3
PC4
cascade
Console
(CS1D)
Console
(CS1D)
DSP1D
(ENGINE)
Master
system
Slave
system
PM1D Manager for Windows Operating manual
12
Connections
Connect the console/engine to your PC as shown in the following diagram. You can make connections in one of two
ways: serial connection or USB connection.
•When using USB connections, you must exit
PM1D Manager before you power-on/off the
console/engine or connect/disconnect cables. If
you perform these actions before exiting, com-
munication may become impossible until you
restart your PC.
• USB connection is not guaranteed to be faster
than serial connection. Depending on your sys-
tem, serial connection may provide faster and
more stable communication. If you were able to
use serial connection with previous versions, we
recommend that you continue using serial con-
nection.
Data communication method
Use the following procedure to initiate communication.
1. Connect your PC to the console or engine, using
either a serial connection or a USB connection.
Hint
When using USB connection, you must first install
the USB driver. If you have not yet installed the USB
driver, do so as described in “USB driver installation”
(→p.17).
2. Power-on the connected console/engine.
3. Start up PM1D Manager, and click the OPTION
button located in the lower left of the Function
menu screen or the OPTION menu in the menu
bar.
4. In the Communication Port field, select the port
that you will be using, and click the OK button.
5. If the system includes a console, click the PERMIT
button in the PC CONNECTION area of the con-
sole’s SYSTEM CONNECTION screen. This will
allow a PC connection with the connected console/
engine.
For details, refer to “CS1D Reference Manual (Soft-
ware)” contained in the CS1D Owner’s Manual SYS/
W.CLOCK function.
Hint
•If you are using Mirror mode, you can communi-
cate only with the selected engine A or B. The
PERMIT button for the unused engine cannot be
turned on from the PC CONNECTION screen.
•If you are using Dual Console mode, you can
communicate only with console 1. The console 2
PERMIT button will not appear in the PC CON-
NECTION screen.
Also, you cannot operate the various PERMIT
buttons from console 2.
• Only one PC can be connected to a system. It is
not possible to connect multiple PC’s to a system.
The PERMIT button in the PC CONNECTION
screen can be turned on either (not both) for the
console or the engine that is being used
(ENGINE A or B).
If you are using cascade connection, master and
slave are handled separately, so this is considered
as two systems.
USB
RS-232-C
1. Serial connection
2. USB connection
D-sub 9-pin (male⇔male)
cross cable
Serial cable
USB cable
PC
PC serial port
USB port
CS1D/DSP1D
rear panel
Click
Click
Communication between PM1D Manager and the console/engine
13
6. In the Function menu screen, click the ONLINE/
OFFLINE button.
The following popup window will appear.
In this popup window you can select one of the fol-
lowing two connection modes.
• UPLOAD
The current settings of PM1D Manager will be
transmitted to the console/engine, and then syn-
chronized operation will begin.
• DOWNLOAD
The current settings of the console/engine will be
transmitted to PM1D Manager, and then synchro-
nized operation will begin.
Whether PM1D Manager is online or offline can be
verified by the state of the ONLINE/OFFLINE but-
ton in the Function menu screen.
Hint
In this version of PM1D Manager, it is not possible to
select uploading to a system that includes a console
(examples 1–4 p.10).
If you want to send data created within PM1D Man-
ager to the console, save the PM1D Manager data on
the PC to an ATA compatible PC flash storage card or
CF (Compact Flash) card, and then insert this card
into the PC ATA STORAGE CARD slot of the con-
sole and load the data. The capability of uploading to
a console will be supported in a future version. How-
ever in the case of example 5 on p.10, uploading to
the engine is possible with the current version.
In a state in which it is not possible to initiate com
-
munications, the OFFLINE/ONLINE button will
be grayed, and cannot be clicked. In this case, please
check the cable connections and settings.
When you click either UPLOAD or DOWNLOAD
in the “CONNECTION” popup window to select
the connection mode, please check the following
points.
•In the console’s SYS/W.CLOCK screen PC CON-
NECTION area, make sure that the PERMIT but-
ton of the device connected to the PC is turned
on.
•Make sure that no popup window is displayed in
the screen of the console.
•Make sure that no file is being loaded on the con-
sole.
•Make sure that time code is not running in the
system.
•Auto fading or manual fading are not in progress.
If any of the above conditions are not satisfied, a
popup window will appear, informing you that the
PC cannot be connected to the other device, and the
connection procedure will be aborted at step 4 above.
Communication may become unstable if the cable
is too long. Use a cable no longer than 5 meters for
serial connection, or a cable no longer than 3
meters for USB connection.
If time code is running when you attempt to initiate
communication, communication will be aborted.
Tr ansmit time code after switching to online mode.
Online operating procedure
If the console/engine and PC are connected correctly,
and communication is possible, the OFFLINE symbol
(see p.8) shown at the top of the PM1D Manager screen
will change to the ONLINE symbol, indicating that
PM1D Manager is online.
Now the PC and the entire system will be operate in tan-
dem, and you can use PM1D Manager for supplemen-
tary control of the system. However, some operations
and parameters will not be linked, so please read p.15
and 16 for details.
While an important operation is being performed on the
console, a popup window like the following will appear,
and PM1D Manager will be temporarily inoperable.
Please wait until the operation on the console has been
completed.
Offline
(connection not possible)
Offline
(connection possible)
Online
PM1D Manager for Windows Operating manual
14
Offline operating procedure
To break communication between the online the con-
sole/engine and the PC, click the OFFLINE/ONLINE
button in the lower part of Function menu screen. The
following popup window will appear, so click the OK
button and you will switch to offline mode.
Immediately before PM1D Manager transitions
from offline to online, all data is automatically
backed up. (This is referred to as the recovery
point.)
When returning to the offline state, the scene mem-
ories and all library data will return to the recovery
point, regardless of the reason that the system went
offline. In other words, the current scene will be
maintained from its online state, but the scene
memories and all library data will not be main-
tained.
Also, the DIRECT RECALL / MIDI CTRL
CHANGE / TC EVENT functions will normally not
be recovered. Be aware that this may produce set-
tings that you do not expect.
Even if the user does not manually switch to the
offline state, communication will forcibly be
switched offline when one of the following occurs.
•When you exit PM1D Manager while online
•When permission for PC connection is canceled
on the console
•When the console switches between engine A/B
while the PC is connected to the engine (system
example 4 on p.10)
•When a console is connected to a system that
consisted of only an engine and a PC (system
example 5 on p.10)
•When the cable connection is accidentally bro-
ken, or if a communication time-out occurs for
any reason (*)
•When processing cannot be performed in time
because of an excessive amount of data being
transferred (*)
•When the user cancels during an upload or
download (*)
•When the SYSTEM CONFIGURATION of the
console is switched to console 2 while the console
and PC are still online (*)
* In these cases, PM1D Manager will attempt to return
all data on the PC to the recovery point, but it is possi-
ble that the data has already been destroyed. You can
either reload the data, or re-connect to the device with
which you were communicating.
If the PC is connected to the engine in a system that
includes a console (system example 4 on p.10), and if
communication between the console and engine is bro-
ken for some reason, the scene memory and all library
data will return to the recovery point. If you are using
the PC as a backup for the console, we recommend that
you load the PC with same data as the console while the
PC is still offline, so that the recovery point will be the
same state as the console. Then make the connection.
Cautions regarding data communication
■
You should exit all Windows application software
and resident software. Communication may be
unstable if you fail to do so.
■
Do not perform the following operations while com-
munication is occurring. Doing so may cause com-
munication to be broken.
•Suspend/resume operations
• Starting up a screen saver (including automatic
startup by timer)
•Connecting or disconnecting a memory card or
USB device, etc.
■
If you are using a notebook PC, you may require a
higher level of performance than described for the
minimum level of system configuration (
→
p.3).
■ If you are using a notebook PC, communication may
become unstable because of power-management set-
tings in the Windows control panel or power-man-
agement settings specific to your CPU (SpeedStep
[Intel CPUs], PowerNow! [AMD CPUs], LongRun
[Transmeta CPUs]). Please turn such functionality
off, and use the notebook PC with its AC power
adaptor connected.
Special considerations
15
Special considerations
This section notes various things you should be aware of concerning the parameters and operations in each
screen.
■ PREFERENCE switch
■ SELECTED INPUT CHANNEL / SELECTED
OUTPUT CHANNEL
These settings are not linked with the console in the
system, and can be set independently.
Hint
You can switch the channel directly by left-clicking or
right-clicking SELECTED INPUT CHANNEL /
SELECTED OUTPUT CHANNEL field located in
the lower part of the screen.
■ MODULE FLIP / FADER FLIP
These functions are specific to the console, and do
not exist in PM1D Manager.
■ PREVIEW mode on/off (MEMORY screen)
This is not linked with the console in the system, and
can be set independently.
If you exit PM1D Manager with Preview mode
turned on, the content (Preview mode content)
that was displayed when you last exited) will be
recovered. However at this time, the PREVIEW
button will be turned off. In the same way if you
go offline with Preview mode turned on, the
contents that had been Preview-displayed when
online will be handled as Preview mode = off.
■ Fade time operation
Due to functional limitations, realtime control and
monitoring of the fade time is not possible on PM1D
Manager. Thus, the manual fade function cannot be
used.
If you recall a scene for which a fade time setting has
been specified, the faders/pan in PM1D Manager will
immediately indicate the value that is to be reached
after fading, and will stop there. However, if you
operate a fader while the fade time is being executed,
the fade for that channel will be cancelled, and the
fader will remain at the position to which you moved
it.
If the PC and engine alone are online, Fader Start
control is performed from PM1D Manager. Thus,
even if the scene has a fader time setting, Fader Start
will function immediately after scene recall occurs.
■ MIDI program changes / control changes
The MIDI ports of the PC cannot be used as MIDI
inputs/outputs for the PM1D Manager software.
■ TC events
The setting can always be made, but since operation
in response to incoming time code is performed by
the console itself, the following restrictions apply.
(*) It will not be possible to operate the EVENT RECALL-
ING button or TIME CODE IN button in the TC
EVENT screen (MIDI/GPI/TC function).
It is not possible to output time code directly
from the PC. Nor can the CAPTURE button
operated from the PC.
■ Meters
The function of the meters will change as follows,
depending on the online/offline status of PM1D
Manager, and on the presence or absence of a con-
sole.
(*) Due to functional limitations, some meter data can be
displayed only for a single selected channel within the
system. In such cases, the channel selected on the con-
sole will be given priority.
In order to avoid inconsistencies due to the fact that
the selected channel is not linked between the PC and
console, this type of meter will not be displayed on the
PC.
Also, the ∑ meter will not be displayed on the PC.
CONFIRMATION
ON/OFF
These settings are not linked
with the console in the system,
and therefore must be set indi-
vidually.
WARNING MESSAGES
ON/OFF
GATE/COMP GR
METER ON/OFF LINK
INTERNAL
CALENDAR/CLOCK
Since this indicates the date of
the PC, it is not linked with the
console. Make this setting in
the Windows [Control Panel]-
[Date and time].
Others
These functions are specific to
the console, and do not exist in
PM1D Manager.
The SELECTED CH field in the
AUTO DISPLAY area is not
shown in PM1D Manager, but
is always enabled.
Offline
Fixed at Preview mode = off
Online
Preview mode can be turned
on/off
Offline
Function is valid (*)
Online
Console exists in
the system
Function is valid
Console does not
exist in the system
Function is invalid (*)
Offline
No meters will be dis-
played.
Online
Console exists in
the system
Some meters will not
be displayed. (*)
Console does not
exist in the system
All meters will be dis-
played.
PM1D Manager for Windows Operating manual
16
■ KEY IN CUE button (GATE PRM screen)
Operation will change as follows, depending on the
online/offline state of PM1D Manager and on the
presence or absence of a console.
(*) In order to avoid inconsistencies due to the fact that
the selected channel is not linked between the PC and
console, this will never be displayed on the PC.
■ SYSTEM CONFIGURATION in screens such as
the SYS/W.CLOCK function SYSTEM CON-
NECTION screen and ENGINE SELECT
Operation will change as follows, depending on the
online/offline state of PM1D Manager and on the
presence or absence of a console.
For reasons of safety, the above settings will not
be reflected in the connected device even if you
select UPLOAD when initiating the connection.
(Conversely, the setting of the connected device
will be reflected on the PC.)
■ UNIQUE No. in the SYS/W.CLOCK function
SYSTEM CONNECTION screen
Operation will change as follows, depending on the
online/offline state of PM1D Manager and on the
presence or absence of a console.
■ DIGITAL I/O connector select button and PC
CONNECTION area in the SYS/W.CLOCK
function SYSTEM CONNECTION screen
These functions are specific to the console, and do
not exist in PM1D Manager.
■ MUTE MODE buttons in the lower part of the
display / DIRECT RECALL screen / MUTE
GROUP ASSIGN screen
These are not linked with the console in the system,
and can therefore be operated independently.
■ LOAD/SAVE screen
The number of characters that can be used in a file-
name is eight characters plus the filename extension
(.PM1). If this number of characters is exceeded, the
file cannot be recognized by PM1D Manager, and the
file may not be displayed in the file list. Please be
aware of this if you modify the filename in Windows.
■ Simultaneous use with other serial communi-
cation software such as PM1DLOAD
PM1D Manager cannot be used simultaneously on
the same port as other serial communication soft-
ware such as PM1DLOAD.
Please exit all such software before starting PM1D
Manager.
■ Simultaneous use with software that uses the
YAMAHA USB-MIDI driver
[Windows 98 / 98SE / Me]
Software (such as sequencers) that uses the MIDI
port cannot be used simultaneously on the same port
with the YAMAHA USB-MIDI Driver. They can be
used simultaneously if they use different ports.
[Windows 2000 / XP]
The Windows 2000 / XP version of the YAMAHA
USB-MIDI driver (currently version 1.61) does not
have multi-client support, so even if a different port
is used, simultaneous use with the drivers of other
software is not possible.
■ PC connections in a system that includes a
console
If the system includes a console, connections with
the PC are limited in the following ways.
• It is not possible to select UPLOAD when initiating
the connection.
• When online, the following items cannot be operated
from PM1D Manager. (However, they can be oper-
ated from the console.)
•Load/save operations in the LOAD/SAVE screen
(UTILITY function)
•STORE, TITLE EDIT, and APPLY EDIT button
operations, changes to Scene Link, and Scene
Sort in the MEMORY screen (SCENE function)
•STORE, TITLE EDIT, and APPLY EDIT button
operations in the various libraries
• Startup/viewing/operations in the UNIT,
PATCH, and NAME library popup windows
Hint
If you want to transfer data created on PM1D Man-
ager to the console, store the PM1D Manager settings
on the PC to an ATA compatible PC flash storage
card or CD (Compact Flash) card. You can then
insert this card into the PC ATA STORAGE CARD
SLOT of the console and load the data into the con-
sole.
Offline
Operable
Online
Console exists in
the system
Not displayed. (*)
Console does not
exist in the system
Operable
Offline
Operable
Online
Not operable
Offline
Not displayed
Online
Console exists in
the system
Displayed / not setta-
ble
Console does not
exist in the system
Displayed / settable
USB MIDI Driver
17
USB MIDI Driver
If you are connecting the console/engine to a USB port on your PC, you’ll need to install the Yamaha USB
driver. If this driver is already installed, or if you will be using a serial connection (RS-232-C connector), you
do not need to install the USB driver.
The procedure for installing the Yamaha USB driver
depends on the version of Windows that you are using.
• Windows 98 & 98SE, see page 17
• Windows Me, see page 18
• Windows 2000, see page 18
• Windows XP, see page 19
Windows 95 and NT 4.0 do not support USB.
Please use a serial connection.
Windows 98 & 98SE
1. Start your PC and Windows, and insert the
included CD-ROM into your PC’s CD-ROM drive.
2. Power-off the console/engine, and use a USB cable
to connect the console/engine to the PC.
The USB connector of the console/engine is located
in the PC CONTROL section of the rear panel.
3. Turn on the console/engine.
The Add New Hardware Wizard appears. If it doesn’t
appear, try disconnecting and reconnecting the USB
cable. Alternatively, open the Add New Hardware
control panel.
4. Click Next.
The following window appears.
5. Select “Search for the best driver for your device
(Recommended),” and then click Next.
The following window appears.
6. Select “Specify a location,” and specify
“D:\USBdrv_” (replacing “D” with the drive letter
of your CD-ROM drive), and then click Next.
When the driver is located, “YAMAHA USB MIDI
Driver” is displayed, as shown below.
7. Click Next.
You may be prompted to insert your Windows CD-
ROM. Do not insert it! Click OK, and in the “Copy
files from” section of the subsequent dialog box,
enter “D:\USBdrv_” (replacing “D” with the drive
letter of your CD-ROM drive), and then click OK.
The driver is installed, and the following window
appears when the installation is complete.
8. Click Finish, and then restart your PC.
PC
Driver
PM1D
Manager
CS1D/DSP1D
USB cable
PM1D Manager for Windows Operating manual
18
Windows Me
1. Start your PC and Windows, and insert the
included CD-ROM into your PC’s CD-ROM drive.
2. Power-off the console/engine, and use a USB cable
to connect the console/engine to the PC.
The USB connector of the console/engine is located
in the PC CONTROL section of the rear panel.
3. Turn on the console/engine.
The Add New Hardware Wizard appears. If it doesn’t
appear, try disconnecting and reconnecting the USB
cable. Alternatively, open the Add New Hardware
control panel.
4. Select “Automatic search for a better driver (Rec-
ommended),” and then click Next.
Windows Me should be able to locate the driver
automatically, in which case you can proceed to Step
5. If the driver cannot be located, select “Specify the
location of the driver (Advanced),” click Next, spec-
ify your CD-ROM drive (e.g., D:\USBdrv_), and
then continue as prompted.
The following window appears when the installation
is complete.
5. Click Finish, and then restart your PC.
Windows 2000
1. Start your PC and Windows, log on as the Adminis-
trator, and then insert the included CD-ROM into
your PC’s CD-ROM drive.
2. Go to My Computer→Control Panel→
System→Hardware→Driver Signing→File Signa-
ture Verification, select “Ignore-Install all files,
regardless of file signature,” and then click OK.
3. Power-off the console/engine, and use a USB cable
to connect the console/engine to the PC.
The USB connector of the console/engine is located
in the PC CONTROL section of the rear panel.
4. Turn on the console/engine.
The Found New Hardware Wizard appears.
5. Click Next.
6. Select “Search for a suitable driver for my device
(Recommended),” and then click Next.
7. In the subsequent window, select “CD-ROM
drives” only, and then click Next.
You may be prompted to insert your Windows CD-
ROM. Do not insert it! Click OK, and in the “Copy
files from” section of the subsequent dialog box,
enter “D:\USBdrv2k_” (replacing “D” with the
drive letter of your CD-ROM drive), and then click
OK.
The driver is installed, and the message “Completing
the Found New Hardware Wizard” appears.
8. Click Finish, and then restart your PC.
USB MIDI Driver
19
Windows XP
1. Power-on the PC, and when Windows starts up, log
in using an account with Administrator privileges.
2. Insert the included CD-ROM into your PC’s CD-
ROM drive.
3. Click the Start button, and then click Control
Panel.
If the Control Panel window appears as shown
below, click “Switch to Classic View” on the left side
of the window in order to see all the control panels.
4. Go to System Hardware→Driver signatures→
Driver signature options, select “Ignore-Install
software without asking for confirmation,” and
then click OK.
5. Click OK to close the System Properties window,
and then click the Close button to close the Control
Panel window.
6. Power-off the console/engine, and use a USB cable
to connect the console/engine to the PC.
The USB connector of the console/engine is located
in the PC CONTROL section of the rear panel.
7. Turn on the console/engine.
The Found New Hardware Wizard appears.
8. Select “Install software automatically (recom-
mended) (I),” and then click Next.
The driver is installed, and the message “Completing
the Found New Hardware Wizard” appears.
9. Click Finish, and then restart your PC.
Troubleshooting
Cannot control the console/engine via USB
• Have you installed the Yamaha USB MIDI driver (see
page 17)?
• Is the USB cable connected correctly (see page 12)?
• Have you correctly set the Communication Port in
the Option menu of PM1D Manager?
Cannot install the Yamaha USB MIDI Driver
• Is the USB cable connected correctly (see page 12)?
Tr y disconnecting the USB cable, and then recon-
necting it.
• Windows: Is USB enabled? When the console/engine
is connected to your PC for the first time, if the Add
New Hardware Wizard doesn’t appear, it may be
because your PC’s USB controller is disabled. To
check this, open the System control panel, click the
Device Manager tab, and check for any crosses (x) or
exclamation marks (!) next to the “Universal Serial
Bus controllers” and “USB Root Hub” items. If these
items do have these marks next to them, your USB
controller is disabled. For information on enabling
your USB controller, refer to your PC’s documenta-
tion.
• Windows: If for some reason installation of the
Yamaha USB Driver fails, the CS1D/DSP1D may be
registered as an unknown device and you may not be
able to reinstall the driver until the unknown device
is deleted. In this case, open the System control
panel, click the Device Manager tab, and select the
“View devices by connection” option. If an item
called “Other devices” appears in the list, click it. If
there’s an item called “Unknown device,” select it and
then click the Remove button. Disconnect the USB
cable, then reconnect it, and now try installing the
driver again.
How to remove & reinstall the Yamaha USB MIDI
Driver
• Windows 98/Me: Presuming that the Yamaha USB
MIDI Driver was installed successfully, and that the
console/engine has been recognized correctly, the
driver can be removed from your PC as follows.
Open the System control panel, click the Device
Manager tab, select the “YAMAHA USB MIDI
Driver,” and then click the Remove button. After
deleting the following files, disconnect the USB
cable, reconnect it, and then reinstall the driver
again.
Windows\Inf\Other\YAMAHACS1D.INF (or
YAMAHADSP1D.INF)
Windows\System\Xgusb.drv
Windows\System\Ymidusb.sys
Improving performance
• If your PC seems unresponsive, make sure it satisfies
the system requirements (see page 3).
• Quit any other applications that you are not using.
Cannot suspend or resume your PC
• Windows: Suspend will not work if there are any
MIDI applications open.
• Windows 2000: Depending on the USB controller,
etc., on some systems, suspend and resume may not
work properly. If the console/engine stops respond-
ing, try disconnecting and reconnecting the USB
cable.
IP 20 M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2002 Yamaha Corporation
Printed in Japan
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
in altre lingue
- English: Yamaha PM1D User manual
- français: Yamaha PM1D Manuel utilisateur
- español: Yamaha PM1D Manual de usuario
- Deutsch: Yamaha PM1D Benutzerhandbuch
- русский: Yamaha PM1D Руководство пользователя
- Nederlands: Yamaha PM1D Handleiding
- português: Yamaha PM1D Manual do usuário
- dansk: Yamaha PM1D Brugermanual
- čeština: Yamaha PM1D Uživatelský manuál
- polski: Yamaha PM1D Instrukcja obsługi
- svenska: Yamaha PM1D Användarmanual
- 日本語: Yamaha PM1D ユーザーマニュアル
- Türkçe: Yamaha PM1D Kullanım kılavuzu
- română: Yamaha PM1D Manual de utilizare
Documenti correlati
-
Yamaha V2 Manuale del proprietario
-
-
Yamaha CS1D Manuale del proprietario
-
-
-
-
-
-
-