Sylvania 6260VE Manuale del proprietario

Marca: Sylvania

Modello: 6260VE

Tipo: Manuale del proprietario

SYLVANIA

Owner's Manuam

Video Cassette Recorder

If you need additional operating assistance after

reading this owner's manual or to order replace-

ment accessories, please call

TOLL FREE : 1-800-968-3429

or visit our web site at

http://www.SylvaniaConsu met Electronics.corn

1. Before using your VCR

If channel 3 is already occupied for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into the VCR.

3) Press the PLAY button once.

• 4) After a few seconds, press the PLAY button on the VCR for 3 seconds.

• • The RF output channel will change to channel4 from channel 3 andyou

will see a playback picture.

• • When a picturedoes notappear onthe TV screen, repeat step [4].

o he RFoutput channel may not

change when you adjust track-

ingduring playback.In this case,

stop the playback,and start the

playbackagain. After that, press

the PLAYbuttonon theVCR for

3 secondsagain.

(Back of VCR}

RF Cable (supplied)

Plug the AC power cords of the VCR and TV into the AC outlets.

Select this connection when you want to view or record a Select this connection when you want to change channels

scrambled channel. With this connection, channelscannot on the VCR. With this connection, you may watch one

be changedon the VCR.You canview or record ONLYthe channel while recording another.

channels youhave selectedonthe cable box or the satellite

box.

• While you are recording, only the recorded channel

can be viewed.

To select channels of the cable box or satellite box

1)Turn on the VCR by pressing the POWER button, and

then, press the VCR/TV button.The POWER and the

VCR/TV indicators on the front panel will light on.

Then, press the CHANNEL buttons to select channel 3

or 4 (the same channel as the output channel of the

cable box or satellite box).

• If you use the channel 4, you need to change the

VCR's RF output to channel 4. Refer to "RF Output

Channel".

2) At the TV, select channel 3 or 4 (the same channel as

you have selected at step 1).

3) At the cable box or satellite box, select the channel you

want to view or record.

• You may not view or record a scrambled channel.

To select channelsof the cable box

1) At the cable box, select channel 3 or 4 (the same

channel as the VCR's RF output channel.)

• Refer to "RF Output Channel".

2) At the TV, select the same channel as the output chan-

nel (3 or 4) of the cable box.

3) Turn on the VCR by pressing the POWER button, then

press the VCR/TV button. The POWER and VCR/TV

indicators on the front panel will light on. Then, select

the channel you want to view or record.

i To play back a tape

Follow the steps 1) to 2) above. Then, play back a tape.

• Refer to "Playback" on page 5.

To view one channel while recording another

1) While youare recordingon the VCR, press the VCR/TV

button so that theVCR/TV indicatordisappearsonthe

VCR.

2) At the cable box, select the channel you want to view.

You can use the AUDIO OUT jacks and

VIDEO OUT jack on the back of the

VCR if your TV has AudioNideo Input

jacks. In this case, you need to set the

TV to external Line Input Mode. Please

refer to your TV's owner's manual.

(Back of TV)

(Back of VCR)

AUDIO OUT jacks AUDIO IN jacks

Connect the audio cables to the audio in Connect the audio cables from the audio

acks of a camcorder, another VCR, a stereo _ [_out acks of a camcorder another VCR or

amplifier, or an audio system. / /an audiosource.

_mll r_,} 4 _j_f_m I ANT IN jack

lll=q'I i II /NL [};/ _£_Connect your antenna or cabb box.

'_°_ _ _Connect thJeRF cable (supplied)to

_the antenna input jack on your TV.

VIDEO OUT jack

Connect the video cable to the video in jack / I VIDEO IN lack

of a camcorder, another VCR, or a TV. I Connect th'e video cable from the video oul

jack of a camcorder another VCR. or ar

8-- audio-visua source (laser disc player,

video disc player, elc.L

• Remote control

(NA371UD/

NA375UD)with

TwoAA batteries

• RF Cable • Owner's Manual

(WPZ0901TM002) (0VMN03901)

Printed in China

Install two AA batteries

(supplied) matching the J_"'/_--'b_

polarity indicated o

the bottom ofthe

remote control.

0VMN03901 /HF410UD, HJ410UD ****

2. mmportant Safeguards

WARNING: ToREDUCETNER SKOFRREORELECTR=CSNOOK, IDO NOT EXPOSE TH_S APPUANCE TO RAiN OR MOISTURE,

CAUTION: TO REDUCE THE RISK OF ELECTRIC I

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL,

The ¢auf_iolll _atking is leeal;ed on _the i'ea_t o4 _the cabifle_,

The %htning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous

vokage" ,within the product's enclosure that may be of sufficient magnitude

to constitute a risk of e_ectric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

1. Read Instructions- All the safety and operating

instructions should be read before the appliance

is operated.

2, Retain Instructions- The safety and operating

instructions should be retained for future refer-

ence.

3. Heed Warnings- All warnings on the appliance

and in the operating instructions should be

adhered to.

4. Follow Instructions- All operating and use

instructions should be followed.

5. Cleaning- Unplug this video product from the

wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth

for cleaning.

EXCEPTION: A product that is meant for unin-

terrupted service and, that for some specific

reason, such as the possibility of the loss of an

authorization code for a CATV converter, is not

intended to be unplugged by the user for clean-

ing or any other purpose, may exclude the refer-

ence to unplugging the appliance in the clean-

ing description otherwise required in item 5.

6. Attachments- Do not use attachments not rec-

ommended by the video product manufacturer

as they may cause hazards.

7. Water and Moisture- Do not use this video

product near water, for example, near a bath

tub, wash bowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, and

the like.

8. Accessories- Do not place this video product

on an unstable cart, stand, tripod, bracket, or

table. The video product may fall, causing seri-

ous injury to a child or adult, and serious dam-

age to the appliance. Use only with a cart.

stand, tripod, bracket, or table recommended by

the manufacturer or sold with the video product.

Any mounting of the appliance should follow the

manufacturer's instructions and should use a

mounting accessory recommend- ,_r_,EOA,_A_<,_

ed by the manufacturer. An appli-

ance and cart combination should

be moved with care. Quick stops

excessive force, and uneven sur-

faces may cause the appliance

and cart combination to overturn. _*

9. Ventilation- Slots and openings in the cabinet

are provided for ventilation and to ensure reli-

able operation of the video product and to pro-

tect it from overheating and these openings

must not be blocked or covered. The openings

should never be blocked by placing the video

product on a bed, sofa, rug, or other similar sur-

face. This video product should not be placed in

a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the man-

ufacturer's instructions have been adhered to.

10. Power Sources- This video product should be

operated only from the type of power source

indicated on the marking label. If you are not

sure of the type of power supply to your home,

consult your appliance dealer or local power

company. For products intended to operate from

battery power, or other sources, refer to the

operating instructions.

11. Grounding or Polarization- This video product

is equipped with a polarized alternating-current

line plug (a plug having one blade wider than

the other). This plug will fit into the power outlet

only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to

fit. contact your electrician to replace your obso-

lete outlet. Do not defeat the safety purpose of

the polarized plug.

12. Power Cord Protection- Power supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or

against them, paying particular attention to

cords at plugs, convenience receptacles, and

the point where they exit from the appliance.

13. Outdoor Antenna Grounding- If an outside

antenna or cable system is connected to the

video product, be sure the antenna or cable sys-

tem is grounded so as to provide some protec-

tion against voltage surges and built-up static

charges. Article 810 of the National Electrical

Code, ANSl/NFPA No. 70, provides information

with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of

grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

(Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

[ DISCHARGE UNIT

(NEO SECTION 810-21}

(NEC ART 25/N PAR'[ H} GROUND CLAMP

NEC NATIONAL ELECTRICAL CODE

$2898A

14. Lightning- For added protection for this video

product during a lightning storm, or when it is

left unattended and unused for long periods of

time, unplug it from the wall outlet and discon-

nect the antenna or cable system. This will pre-

vent damage to the video product due to light-

ning and power-line surges.

15. Power Lines- An outside antenna system

should not be located in the vicinity of overhead

power lines or other electric light or power cir-

cuits, or where it can fall into such power lines

or circuits. When installing an outside antenna

system, extreme care should be taken to keep

from touching such power lines or circuits as

contact with them might be fatal.

16. Overloading- Do not overload wall outlets,

extension cords, or integral convenience recep-

tacles as this can result in a risk of fire or elec-

tric shock.

17. Object and Liquid Entry- Never push objects

of any kind into this video product through any

openings as they may touch dangerous voltage

points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any

kind on the video product.

18. Servicing- Do not attempt to service this video

product yourself as opening or removing covers

may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service

personnel.

19, Damage Requiring Service- Unplug this video

product from the wall outlet and refer servicing

to qualified service personnel under the follow-

ing conditions:

a. When the power-supply cord or plug is dam-

aged.

b. If liquid has been spilled, or objects have fallen

into the video product.

c. If the video product has been exposed to rain or

water.

d. If the video product does not operate normally

by following the operating instructions. Adjust

only those controls that are covered by the

operating instructions as an improper adjust-

ment of other controls may result in damage

and will often require extensive work by a quali-

fied technician to restore the video product to its

normal operation.

e. If the video product has been dropped or dam-

aged in any way.

f. When the video product exhibits a distinct

char]ge in performance-this indicates a need for

service.

20, Replacement Parts- When replacement parts

are required, be sure the service technician has

used replacement parts specified by the manu-

facturer or have the same characteristics as the

original part. Unauthorized substitutions may

result in fire, electric shock or other hazards.

21. Safety Check- Upon completion of any service

or repairs to this video product, ask the service

technician to perform safety checks to determine

that the video product is in proper operating

condition.

22. Heat- This video product should be situated

away from heat sources such as radiators, heat

registers, stoves, or other products (including

amplifiers) that produce heat.

-2- EN

3. Preset for Use

....................

I• Ifchannel 3 isalready occupied for broad-

I casting, see"RF OutputChannel" section.

', LANGUAGE SELECT

"\ = I_ ENGLISH [ON1

I STOP PLAYI_ FRANCAIS

.................... ESPAi_4OL

"\ \

FFWDb_

CH 01 I

.............AUTO SET UP

PresstheME.Uii'iiil

button to exit I

I'Refer to "Hint for Cable Box or

Satellite Box"section on page 1. j_j_

_Please waitforafewminutes. I

IAf_e_,scanning... ]

I• The tuner stops onthe lowestmemorized I

I channel ]

l• you,can select onlythe channels memorized 1

I inVCR by using the CHANNEL buttons. I

I• If "ALITOSET UP" appears on the TV/screenI

I again, checkthe cable connections.Then, I

I press the EFWD button once again.j

To Select a Channel

You can select a channel by directly

pressing the Number buttons on the

remote control,

Notes for using the Number but-

tons:

• When selecting cable channels which

are higher than 99, enter channel

numbers as a three-digit number.(For

example: 117, press 1,1,7)

• You must precede single-digit

channel numbers with a zero (For

example: 02, 03, 04 and so on).

To Preset the Channel Aqain

1) Pressthe MENU button untilthe main

menuappears.

2) Select "CHANNEL SET UP" by pressing the

PLAYor STOP button.Then, press the

EFWD button.

3) Select "AUTO SET UP" by pressing the

PLAYor STOP button.Then, press the

EFWD button.After scanning, the tuner

stops on the lowest memorized channel.

ToChanqethe On-ScreenLanquaqe

1) Press the MENU button untilthe main

menuappears.

2) Select "LANGUAGE SELECT" by pressing

the PLAYor STOP button.Then, press the

EFWD button.

3) Select "ENGLISH", "FRANCAIS" or

"ESPANOL" by pressing the PLAYor STOP

button.Then, pressthe C.RESET/EXlT but-

ton.

H!nt ,, ; " [

• If you accidentally selectSpanish or French

and need English: Press the MENUbutton

and choose SELEC. IDIOMA,or SELEC-

TION LANGUE. Press the EFWD button,

and selectENGLISH. Finally,press the

C.RESET/EXlT button.

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

• STOP PLAy I,,- AUDIO OUT

TV STEREO [ON]

SAP

F FWD _

c.....L..T..

• STOP pLAy I,- AUTO SET UP

ll.-MANUAL SET UP

F FWDI,-_

0b_{;_b

MANUAL SET UP

ISTOP PLAy Ira,- CHANNEL 30 CATV

......

.....ADD .......

..........:- X_.XSele_ t_e

added or deleted.

_ -MENU-

(_i) TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

_" CLOCK SET

LANGUAGE SELECT

AUDIO OUT

• STOP PLAy I_- TV STEREO [ON]

_F_ SAP

or_ '_'j ° If the clock is not set, the

.... _'_._'% CLOCK SET screen

' _ ) appears when you press

_._the MENU button. In this

case, go to step [2].

F FWD_,,_

.....IMON::OOKS% II

I_ .........b,_/

F FWD_

13/ r CLOCKS T

• STOP PLAy I_- MONTH DAY YEAR

or HOUR MINUTE AM/PM

F FWD _

I 4i_F _W FFWD_,,_ [ MANUAL SET UP 11 I_p p [ CLOCK SFT ql

CHANNF_L 30 (OATV) _I_:_ s l,.

r HOUR :MINUTE A M/PM

I Select "ADD" or "DELETE" I

y To exit themenu. ° RxESTETO__/"_ i _ _-_

- 3 -

I_ UP PLAyI_ F MO NTHC LD1OA_:: IY2EAR 4

F FWD _..

16/ / OLOCKSET

ISTO ...... MoONTH D'_Y MoNYEARo 4

o5 : --

F FWD=._

...... cMONTH;LD1OA5 KM:IYEAR4/

0 HOUR:MINUTE _)_4/P M M

2: ,_ "

if_ o exit the CLOCK SET

screen.

FWD_I_

Hint ,# [

,T,Togo backone step, press the nEW button

• (during the steps [2] to [7].)

Your clock settingwill be lost if there is a

power failure or ifthe VCR has been

[ unpluggedfor more than 30 seconds.

4. Precautions

Install Location

For safety and optimum performance of

rour VCR:

Install the VCR in a horizontal and sta-

ble position. Do not place anything

directly on top of the VCR. Do not

place the VCR directly on top of the TV.

Shield it from direct sunlight and keep

it away from sources of intense heat.

Avoid dusty or humid places. Avoid

places with insufficient ventilation for

proper heat dissipation. Do not block

the ventilation holes on the sides of the

VCR. Avoid locations subject to strong

vibration or strong magnetic fields.

Avoid the Hazards of Electrical Shock and

Fire

Do not handle the power cord with wet

hands.

Do not pull on the power cord when

disconnecting it from AC wall outlet.

Grasp it by the plug.

Moisture Condensation Warninq

Moisture condensation may occur inside

the unit when it is moved from a cold

place to a warm place, or after heating a

cold room or under conditions of high

humidity. Do not use the VCR at least for

2 hours until its inside is dry.

FCCWarninq

This equipment may generate or use

radio frequency energy. Changes or

modifications to this equipment may

cause harmful interference unless the

modifications are expressly approved in

the instruction manual. The user could

lose the authority to operate this equip-

ment if an unauthorized change or modi-

fication is made.

Important Copyriqht Information

Unauthorized recording or use of broad-

cast television programming, video tape,

film or other copyrighted material may

violate applicable copyright laws. We

assume no responsibility for the unau-

thorized duplication, use, or other acts

which infringe upon the rights of copy-

right owners.

A Note about Recyclinq

This product's packaging materials are

recyclable and can be reused. Please

dispose of any materials in accordance

with your local recycling regulations.

Batteries should never be thrown away

or incinerated but disposed of in accor-

dance with your local regulations con-

cerning chemical wastes.

Noteto the Cable TV Svstem Installer

This reminder is provided to call the

Cable TV system installer's attention to

Article 820-40 of the National Electrical

Code, which provides guidelines for

proper grounding - in particular, specify-

ing that the cable ground shall be con-

nected to the grounding system of the

building, as close to the point of cable

entry as possible.

CAUTION:

TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR €:VITER LES CHOC

€:LECTRIQUES, INTRODUIRE LA

LAME LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRE-

SPONDANTE DE LA PRISE ET

POUSSER JUSQU'AU FOND.

If you are having problems operating your product even though you have followed

the instructions in this manual, check the following list of problems and corrective

actions. You may be able to solve the problem yourself.

PROBLEM CORRECTIVE ACTION

No power, Make sure the power plug is connected to an AC outlet,

Make sure the power is turned on.

Timer recording is impossible, Make sure the timer recording is set correctly.

Make sure the power is off.

Make sure the VCR clock is set correctly.

Cannot go into Recording mode. Make sure the tape has a record tab, If needed cover the hole with

cellophane tape,

Playback picture is partially noisy. Adjust tracking control for a better picture by pressing the CHANNEL

buttons,

No playback picture (only sound Head cleaning may be necessary. Refer to "Auto Head Cleaning" on

can be heard,) page 8.

Make sure the VCR is not in the Menu mode.

No or poor playback picture, ° Turn on the TV and set the TV to channel 3. If channel 3 is already

occupied for broadcasting, change the RF output to channel 4, and

change the TV channel to channel 4, (See RF Output Channel" on

page 1 for the detail,)

Fine tune the channel reception on your TV.

TV programs cannot be seen nor- Re-check the ANT. IN and ANT. OUT connections, See page 1.

mally. Press the VCR/TV button on the remote control so that the VCR/TV

indicator on the VCR disappears,

No VCR operation from the Make sure the power plug is connected to an AC outlet,

infrared Remote Control. Check batteries in remote control,

Video or color fades in and out when ° You cannot copy a copyrighted video tape, You are experiencing copy

making a copy of a video tape. guard protection.

Video Heads : Four Heads

Operating temperature : 41°F~104°F

(5°C~40°C)

Converter output : VHF Channel 3 or 4.

Power requirement : 120V, 60Hz

Power consumption : 14 Watts

Dimensions : W 14-3/16" (360mm)

H 3-5/8" (92ram)

D 8-9/16" (216mm)

Weight : 4.0 Ibs. (1.8 Kg.)

(approx.)

• Designs and specifications are subject to change without notice and legal obligation.

• If an explanation in the Owner's Manual is not consistent across languages, please

refer to the English version.

4- EN

5. Playback 7. Other Operations

Before:

Turn on the TV and set it to

channel 3. -- [_]_

If channel3 isalreadyoccupiedfor broad-

casting,see"RF OutputChannel"section.

_,x, / STOP

[ PLAYI_,

[E,EOT_--

1 2 3

ooo

8680

Hint i i? [ i[ )););:

• Whenatapewithoutrecordtabis inserted,theVCRwillstart playbackauto-

maticallyat step [1].

• Trackingwillbe automaticallyadjusteduponplayback.Toadjust the trackingmanu-

ally,presstheCHANNELbuttons.

6. Recording & OTR (One Touch Recording)

Before:

Turn on the TV and set it to

channel 3.

Ifchannel3isalreadyoccupiedfor

broadcasting,see"RFOutputChanneFsection. [_

±_JECT V._

W_th t_ _e;rl°t÷ COl/iia) _JScm_r 1 2 3

6 6 6_ CH126,o66 -- 7 8 9 _,

_ii 0 0 0

I \ _ desiredchann, _ _ S S

3_..... ....................................... Selectthedesiredtapespeed _]o _ _3_]° _

"%_ iii ¸¸i,i'i'¸¸

You can select a fixed recording time by press-

ing the REC/OTR button repeatedly.

_X STOP Q\ EJECT A

" [ EJECT

\ '_ | ", &

-q 1

[]

Accidental erasure prevention

To prevent accidental recording on a record-

ed cassette, remove its record tab. To record

on it later, cover the hole with cellophane

tape. Record tab

• IfyouhaveconnectedtheVCRtoacableboxorsatellitebox,referto"Hintfor

CableBoxorSatelliteBox"sectiononpage1.

To cue or review picture during play-

back (Picture Search)

Press the F.FWD or REW button.

• Press it again and the VCR will now

search in super high speed. (in the

LP/SLP modes only)

To freeze the picture on TV screen

durinq playback (Still mode)

Press the PAUSE/STILL button. Each

time you press the button, the picture will

be forwarded by one frame.

• If the picture begins to vibrate vertically

during the still mode, stabilize the pic-

ture by pressing the CHANNEL buttons.

• If the picture is distorted or rolling verti-

cally, adjust the vertical hold control on

your TV, if equipped.

Counter Reset

Press the C.RESET/EXlT button.

To play back in slow motion

Press the SLOW button during playback

or the still mode.

• If the noise bar appears on the TV

screen, you can reduce it by pressing

the CHANNEL buttons.

To temporarily stop recording

(Pause mode)

Press the PAUSE/STILL button.

• During the rec pause mode, five |

marks appear on the TV screen. Each II

mark represents one minute.

• Press it again to resume recording.

Auto Rewind

When a tape reaches its end during play-

back, fast-forward, or recording (except

timer recording and One Touch

Recording), the tape will automatically

rewind to the beginning. After rewinding

finishes, the VCR will eject the tape and

turn itself to off.

8. On-Screen Operations

_To call up the main menu

MENU f -MENU- _1

\,. _" TIMER PROGRAMMING

AUTO REPEAT [OFF]

"\\ _ CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

2_To select an item

=sTo_ P_¥_ -MENU-

_or _ ]_ TIMER PROGRAMMING

AUTO REPEAT [OFF]

, !I_CHANNEL SET UP

_ eLoeNSET

: k\' LANGUAGE SELECT

_To decide

FF_ CHANNEL SET UP

L,_X" AUTO SET UP

, _" MANUAL SET UP

4_,_To exit the menu

[]

1 2 3

OC_

7 8 9 SE%_

0000 i

MENU 0 slow _g_ f

_oo_

9. Recording Features

olnsert a tape with its record tab into the VCR.

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO [ON]

SAP

FFWD_

2_ PROGRAM NUMBER :4 _!

DATE / _

ISTOP PLAY_ START TIME :

_o_ END TIME :--

, __

.........:x S_ _p_ pr_am

number

F FWD_.

(Mon-Fd),or"WEEKLY"

FFWD_

_ Select the desired month

slop PLA¥_ ONE TIME PROGRAM ]

(_ or _ / PRTOFGRAM NUM5BER_4MO N

/START TIME - - :C _ _

Select the desired day

ISTOP p_y_

_or _ .Youcanprogramone

,, yearinadvance.

F FWD _

D-<>

_ elect the desired start

time (hour)

=sic' p_¥_ ONE TIME PROGRAM ]

(_ _) PROGRAM NUMBER 4or DATE 05/03 MON

START TIME 07_0 _-

_r_ END TIME

CHANNEL - -

REO SPEED

Select the

minute

i i =

\ \

FFWD_

(ONETIMEPROGRAM/

.STOP PLAY_ DPARTCEGRAM NUM5B/EoR3 4MO N

I::': W)

[ , \._Select "AM"or"PM"

F F-l,a]D

_ epeat the procedure in steps 1

5 and 6 to set the end time.

F FWD

PROGRAM NUMBER 4 /

II STOP PLAY I_,_ DATE 05/03 MON

= START TIME 07:30 PM

_ __END TIME 08:30 PM

or CHANNEL

: _-_ Selectthedesiredchannel

IfyouhaveconnectedtheVCRto acable

boxorsatelliteboxastheConnectionA

onpage1,selecttheVCRtochannel3or

4 (the RF output channeloftheVCR).

Then,selectthedesiredchannelatthe

cableboxor satellitebox Leavethecable

boxorsatelliteboxonfortimerrecording,

FFWD_-_

19/ roNET,MEPRoGRAMql

ISTOP pLAy I_,_ PROGRAM NUMBER 4 1

.............. DATE 05/03 MON

]T RTT,ME07:30PM

or END TIME 08:30 PM

CHANNEL _16

REC SPEED #p

I ".....

1Selectthedesiredrecordingspeed

l_!urn off the VCR r_

or recording t"°t"°t"°t"°t"_L_ )7

I,TIMER ndcatorontheVCR ghts up.

To Check, Correct, or Cancel a

Timer Program

1) Turn the power on by pressing

the POWER button.

2) Select main menu by pressing

the MENU button.

3) Select "TIMER PROGRAM-

MING" by pressing the PLAY or

STOP button. Then, press the

RFWD button.

4) Select the program number

which you want to check by

pressing the PLAY or STOP but-

ton. The details of the program

you selected will appear on the

TV screen.

• Go to the digit you want to

change by pressing the RFWD

or REW button. Then, enter cor-

rect numbers by pressing the

PLAY or STOP button.

• You may cancel the entire pro-

gram by pressing the REW but-

ton while the program number

flashes.

5) Press the C.RESET/EXlT button

to exit.

6) Press the POWER button to

return to timer stand-by mode.

• If there is a power failure or the VCR has been unplugged for more than 30 sec-

onds, the clock setting and all timer settings will be lost.

• If the tape runs out beforethe end time, the VCR will switch to the Stop mode

immediately, eject the tape and the VCR power will be turned off.The TIMER

indicator willflash.

• If a tape is not in the VCR or does not have the record tab, theTIMER indicator

flashes andtimer recording cannot be performed. Please insert a recordable tape.

• When all the Timer Recording are completed, the TIMER indicator flashes.

To play or eject the recorded tape, press the POWER button first, and then

press the PLAYor EJECT button.

To cancel a Timer Recording that is in progress

Press the STOP/EJECT button on the VCR.

Warning: Unauthorized recordings of copyrighted video tapes

may be an infringement of copyright laws.

(Back ofTV)

*Front input jacks are also available

1) Insert a pre-recorded tape into the playing VCR.

2) Insert a tape with its record tab into the recording VCR.

3) Press the SPEED button on the remote control of the recording VCR

to select the desired recording speed (SP/SLP).

4) Select the "LI" or "L2"position on the recording VCR.

• To use the input jacks on the back of the VCR, select "L1" position by

pressing [0], [0], [1] on the remote control or the CHANNEL buttons.

• To use the input jacks on the front of the VCR, select "L2" position by

pressing [0], [0], [2] on the remote control or the CHANNEL buttons.

5) Press the REC/OTR button on the recording VCR.

6) Begin playback of the tape in the playing VCR.

7) To stop recording, press the STOP/EJECT button on the recording

VCR, then stop playback of the tape in the playing VCR.

Hint

Forbestresultsduringdubbing,usetheVOR'sfrontpanelcontrolswheneverpossible.The

remotecontrolmightaffecttheplayingVCR'soperation.

Alwaysusevideo-qualityshieldedcableswithRCA-typeconnectors.Standardaudiocablesare

notrecommended.

•Youcanuseavideodiscplayer,satellitereceiver,or otheraudio/videocomponentwithAN out-

putsinplaceoftheplayingVCR.

• "LI"or"L2"isfoundbeforethelowestmemorizedchannel.(Example:CH02)

t0. Special Features

You can specify the time for

fast forwarding or rewinding+

,,hsert a tape into the VCR.

F_ TIME SFABCH

::2.'_ :?:;

I x2 (Twice) L

F Select the desired length

of time for fast forwarding

or rewinding

,+TOP I%t Rq

0:01~ 9:59

(1 minute~9 hours

and 59 minutes)

To rewind

44REW

_4/// I PLAY.

Tofast forward

F FWD_

After searching,

You can specify the number of

programs to be skipped+

,, hsert a tape into the VCR.

..... < ....

I xl (Once)

CURRENT PROGRAM

01 ~ 20

O2 O3

02 01 01 INDEX MAR}K'_

Torewind i To fast forward

44REW FFWD_

_ After searching,

W r"LA+ l

Hint for Time Search & Index Search

I These functions are not available duringrecording.

I • Press the STOP button tostop the search.

• Ifthe endof the tape is reached duringa Search,the VCR will cancel the search and rewind the

ape.

You can repeat playback of a

whole tape automatically.

• Insert a tape into the VCR.

V_2

• STOP PLAYI_

-MENU-

TIMER PROGRAMMING

I_- AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO [ON]

SAP

-MENU-

TIMER PROGRAMMING

I_- AUTO REPEAT [ON]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO [ON]

SAP

rAUTO"E"EAT"1

•T_Tocancel Auto Repeat,follow steps [1]-[2]

above, Then, press the EFWD button so

that [OFF] appears besideAUTO REPEAT

I Press the C.RESET/EXlT button to exit.

• If menu remains on the TVscreen at step

3, pressthe C.RESET/EXT button to ext.

-7-

11. MTS System

(Multi-Channel TelevisionSound)

• When you receive a broad-

cast on the VCR, you can

check the type of the broad-

cast by pressing the DISPLAY

button.

• When "TV STEREO" or

"SAP" selection is valid,

select them by following

steps. This selection is need-

ed when you record the pro-

gram.

• SAP means Second Audio

Program (usually second lan-

guage).

D& layonthe

T_ screen

-None-

STEREO

s_%;o

ISTOP PLAY I1,-

Tyrol STEREO/SAP

broadcast £el_tion

Regul_ qnwlid-

_Ol,auralaudi01

Stereo qnwlid-

broadcast

TVSTEREO

Bilin ual (n_ail_audio program)

broa_st

SAP

(second audio plogram)

TV STEREO

Stereo & (stereo main audio p_ogmm)

Bilingual

broadcast SAP

(second audio plogram)

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OF_

CHANNELSETUP

CLOCKSET

LANGUAGE SELECT

AUDIO OUT

TVSTEREO [ON]

SAP

Select "TV STEREO"or

"SAP"

F FWD _

To exit the menu.

• If you have connected a

stereo TV to this VCR, select

"STEREO".

• If you have connected a

monaural TV to this VCR,

select "MONO".

STEREO

T'y4 oi ;+;;;d_;_# k Uoha_nel R-ehm, nel .......

non Hi Fi tapes Monaural Monaura_ Monaural

Hi.Fi tapes

lecorded in

14i: Fi t!ereo

Hi FitaP_ Main audio Mairl audio Main audio

reco, ded main

audio program program program program

Second ,audio } Second audio

program i program

V_EEN2

• STOP pLAyI_

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO {ON]

SAP

F FWD

I AUO,OOUT

STO LAYI_ _" HIFI [ON]

3L_To exit the menu.

t 2. information

original retail _ .ircnase,

91-365 DAYS: FUNAI CORPORATION will exchange

for a factory-servlce-To-new-conaltlOr

unit for a charge of a retailed Drlce unit

for the period of ninety one (9r } days to

tnree hundred sixty five (365) days from

tne date of original rein purcdase.

REPAIR DURATION:

LABOR:

Funai Corporation will excnange or repair [ns product, at THIS WARRANTY DOES NOT COVER PACKING

[s ODUOn. in the event of defect Jn matenals or workman- MATERIALS ANY ACCESSORIES EXCEPT REMOTE

snip as follows: CONTROL UNITS ANY COSMETIC PARTS COM-

EXCHANGE DURATION: PLETE ASSEMBLY PARTS. DEMONSTRATION OR

FLOOR MODELS.

1-90 DAYS: FUNAI COqPORATION will exchange

for a new unit without charge for a pen- FUNAI CORPORATION AND ITS REPRESENTATIVES

ca of ninety (90) days from the date of OR AGENTS SHALL IN NO EVENT BE LIABLE FOE

ANY GENERAL INDIRECT OR CONSEQUENTIAL

DAMAGES ARISING OUT OF OR OCCASIONED BY

THE USE OF OR THE INABILITY TO USE THIS PROD-

UCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES INCLUDING THE WARRANTY

OF MERCHANT ABILITY AND FITNESS FOR A PAR-

TICULAR PURPOSE THAT ARE HEREBY DIS-

CLAIMED BY FUNAI CORPORATION AND ITS REP-

RESENTATIVES OR AGENTS IN THE UNITED

FUNAI CORPORATION will 3rovlae me STATES.

_abor without cnarge for a period of

ninety (go) days from the date of origi-

nal fetal 3urenase,

PARTS: FUNAI CORPORATION will 3rOvlde

Darts 1o reDlace defective parts wlmout

cnarge for a Period of one _1) year from

the date of original retail purchase,

Certain parts are excluded from [nls

warranty.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGI-

NAL RETAIL PURCHASER, A PURCHASE RECEIPT

OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE

WILL BE REQUIRED TOGETHER WITH THE PROD-

UCT TO OBTAIN EXCHANGE OR SERVICE UNDER

THIS WARRANTY

This warranty shall not be extended to any omer Derson

or transferee,

This warranty is void and of no effect if any serial num-

ALL WARRANTY INSPECTIONS AND REPAIRS MUST

BE PERFORMED BY A FUNAI AUTHORIZED CEN-

TER, THIS WARRANTY IS VALID WHEN THE PROD-

UCT IS DELIVERED PREPAID TO A FUNAI AUTHO-

RIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE IF AT ANY TIME

DURING THE WARRANTY PERIOD YOU ARE UNABLE

TO OBTAIN SATISFACTION WITH THE EXCHANGE

OR REPAIR OF THIS PRODUCT PLEASE CONTACT

FUNAI CORPORATION.

ATTENTION:

FUNAI CORPORATION RESERVES THE

RIGHT TO MODIFY ANY DESIGN OF THIS

PRODUCT WITHOUT PRIOR NOTICE

For information about your product or for

Bets on me oroduct are altered, reolacea, defaced or information on how to exchange or repair you[

missing This SYLVANIA Limited warranty applies only to product, telephone or write to the following:

Droauct Durcnasea ana used in the United States,

This product is produced for home use _na mls warranty

only covers failures due to defects in matenal or WORK-

mansnlp wnlcn occur aunng normal use. It does not

cover damage which occurs in sh umem. or failures

wnlcn are caused by repairs, alterations, or parts nol

supptled by FUNAI CORPORATION. or damage wnlcn

results from accidenl misuse, abuse, mishandling, mis-

application, alteration, faulty 3s[allaTion. improper main- Head Office: 100 North Street. Teterboro NJ 07608

tenance commercial use sucn as notel rental or office PLEASE DO NOT SHIP YOUR UNIT TO THE

use of this Product. or damage which results from fire. TETERBORO ADDRESS

flood, lightning or omer acts of God.

FUNAI CORPORATION. INC.

SERVICE CENTER

19900 Van Ness Avenue. Torrance. CA 9050"

Tel :1-800-968-3429

http:llwww.SylvaniaConsumerElectronics,com

Servicing

Should your VCR become inoperative, do not

try to correct the problem by yourself. There

are no user-serviceable parts inside. Turn off,

unplug the power plug, and please call our

help line mentioned on page 1 to locate an

Authorized Service Center.

Cabinet Cleaning

Wipe the front panel and other exterior sur-

faces of the VCR with a soft cloth immersed

in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray

insecticide liquid near the VCR. Such chemi-

cals may cause damage and discoloration to

the exposed surfaces.

Auto Head Cleaning

Automatically cleans video heads asyou insert or

remove a cassette, so you can see a clear picture.

Playback picture may become blurred or interrupt-

ed while the TV program reception is clear. Dirt

accumulated on the video heads after long peri-

ods of use, or the usage of rentalor 'worntapes

can cause this problem. Ifa streaky or snowy pic-

ture appears during playback, the video heads in

yourVCR may need to be cleaned.

1.Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the

problem, please call our help line mentioned on

page 1to locate an Authorized Service Center.

NOTES:

. Remember to read the instructions included with

the video head cleaner before use.

Clean video heads only when problems occur.

PREPARACK)N DE CANALES

(La antena o la caja de televisiGn pot

came debera estar conectada)_

NOTES: Cuando utilice su nueva

videograbadora pot primera vez, o en e!

caso de ser necesario despu_s de pro-

ducirse un fallo en la alimentaciGn, la

videograbadora se pondr4 inicialmente en el

modo de prea]uste cuando se pulse

[POWER].

!. Encienda el televisor y ponga el televisor

en el canal 3.

2. Pulse [POWER] para encender la

videograbadora.

3. Seleccione "ENGLISH",

"FRANCAIS"(French)

o "ESPAi_OL" SELEC.IDIOMA

(Spanish) pulsando ENGLISH

[PLAY] o [STOP],Y FRANCAIS

luego pulse [EFWD]. _.ESPAiIOL [ON]

4. Pulse una vez

[RFWD].

E! sintonizador exp!ora

-8-

y memoriza todos los canales activos de su

zona. Tras la exploraci6n, el sintonizador se

detiene en el canal memorizado m4s bajo.

PREPARACION DEL RELOJ

1=Pulse [MENU] hasta que aparezca el

menu principal. (Si el reloi no est4 puesto

en hora y se pulsa [MENU], el menO

AJUSTE DE RELOJ aparece en primer

lugar. En este caso, siga el paso 3.)

2. Pulse [PLAY] o [STOP] para indicar a

"AJUSTE DE RELOJ'L Luego, pulse [RFWD].

Luego, pulse [F.FWD]

[_Yi oiSfS_i:.......

Luego, pulse [F.FWD]

Pulse [epetidalnente PLAY o STOP

Luego, pulse [F FWD]

Luego, pulse [F.FWD]

Ril]_,_rg}iii_.,8,;i_iF'_Y;_,[gfBPj:........

Luego, pulse [F.FWD]

............................... MES DIA Ai_lO /

, Para volver atr4s un 03 / 15 LUN 2004

paso, pulse [REW]. HORAMINUTO_M!PM

05 : 40 pM AM

4. Pulse [RFWD] para \_-PM

poner en fun-

cionamiento el reloi. EN

Sylvania 6260VE Manuale del proprietario

Marca: Sylvania

Modello: 6260VE

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Sylvania 6260VE Owner's manual

Sylvania 6260VE Manuale del proprietario

Sylvania 6260VE Manuale del proprietario

in altre lingue

Altri documenti