DTS DELTA 5-7 RGB R Manuale utente

Marca: DTS

Modello: DELTA 5-7 RGB R

Categoria: Proiettori

Tipo: Manuale utente

Questo manuale è adatto anche per

DELTA RDELTA R

User Manual Rel 1.4

DELTA R FULL COLOR

DELTA R TRILED

DELTA 5-7 RGB R

DELTA R

Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia

non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo

documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso

scritto della D.T.S .

DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di

design a ciascun proprio prodotto. D.T.S non assume alcuna responsabilità sull’uso o sull’applicazione dei

prodotti o dei circuiti descritti.

The information contained in this publication has been carefully prepared and checked. However, no

responsibility will be taken for any errors. All rights are reserved and this document cannot be copied,

photocopied or reproduced, in part or completely, without prior written consent from D.T.S.

D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products

without prior notice. D.T.S. assumes no responsibility for the use or application of the products or circuits

described herein.

Les informations contenues dans le présent manuel ont été rédigées et contrôlées avec le plus grand

soin. Nous déclinons toutefois toute responsabilité en cas d'éventuelles inexactitudes. Tous droits

réservés. Ce document ne peut être copié, photocopié ou reproduit, dans sa totalité ou partiellement,

sans le consentement préalable de .

se réserve le droit d'apporter toutes modifications et améliorations esthétiques, fonctionnelles ou

de design, sans préavis, à chacun de ses produits. décline toute responsabilité sur l'utilisation ou

sur l'application des produits ou des circuits décrits.

D.T.S

D.T.S.

Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y

controladas. Con todo, no se asume ninguna responsabilidad por eventuales inexactitudes.

Todos los derechos han sido reservados y este documento no puede ser copiado, fotocopiado

o reproducido, total o parcialmente, sin previa autorizaciónescrita de

se reserva el derecho a aportar sin previo aviso cambios y modificaciones de carácter

estético, funcional o de diseño a cada producto suyo. no se asume responsabilidad de

ningún tipo sobre la utilización o sobre la aplicació

n de los productos o de los circuitos descritos.

D.T.S.

DELTA R

INDEX:

1- TECHNICAL FEATURES 4

2- IMPORTANT SAFETY INFORMATION 8

2.1 Fire prevention

2.2 Prevention of electric shock

2.3 Protection against direct light radiation

2.4 Safety

2.5 Level of protection against the penetration of solid and liquid matter

3- VOLTAGE AND FREQUENCY 9

4- INSTALLATION 9

4.1 Safety cable

4.2 Risk of fire

4.3 Ambient temperature

5- MAINS CONNECTION 10

5.1 Protection:

6- DMX SIGNAL CONNECTION 10

6.1 DMX Addresses

6.2 Selecting the DMX address

7- MOVEMENT 11

8- DISPLAY FUNCTIONS 12

9- OPENING UP THE PROJECTOR HOUSING 25

9.1 Arms

9.2 base

10- CHANGING THE LENSES 26

11- PERIODIC CLEANING 28

12- PERIODIC CONTROLS

13- DMX PROTOCOL 29

1- TECHNICAL FEATURES

Delta R Full Color

40 RGB Full Color LEDs/ LED power 3W

2.800 Lumens / 550 Lux at 5 m (Spot lenses)

RGB color generation / 16 million colours

Colour temperature variable on a linear range (3.200°K÷5.500°K)

No infrared emission / no ultraviolet emission

LEDs average lifespan: 100.000 hours

Four interchangeable optical units (Spot / Medium flood / Wide flood / Very wide flood)

Interface: OLED display + 4 buttons / infrared remote control

Control signals: USITT DMX 512 USITT serial digital signals

15 DMX channels

Independent operation (Master / Slave)

Programmable automated playback (7 days)

Movement on 3 axes : Pan 320° / Tilt1 160°(Motorized); Tilt2 135°(Manual).

Safety-locking system

IP65 protection level

Professional HARTING / ILME sockets (IP65 protection rating)

Full range AC 90-260V, 50-60Hz power supply

Operating ambient temperature -10° / 40°

Weight: 24 Kg

ACCESSORIES

Lenses set spot (cod. 03.LK.008)

Lenses set medium flood (cod. 03.LK.001)

Lenses set wide flood (cod. 03.LK.002)

Flight case for 1 DELTA (cod. 0521C029)

Flight case for 2 DELTA (cod. 0521C030)

Safety wire (3mm x 60 cm), ring spring catch (max. capacity load 60Kg) (Cod. 0521A010)

“C” Clamp GQUICK with “Fast Lock” connection ¼ turn (max. load 80Kg) (cod. 0521A014)

DELTA R

Packaging Dimensions (LxDxH)

530 x 500 x 660 mm

Weight 30 Kg

Dimensions (LxDxH)

projector 430 x 285 x 570 mm

Weight24 Kg (motorized version)

Delta R Triled

20 LEDs / TRILED technology / LED power 1W x 3

2.400 Lumens / 520 Lux at 5 m (spot lenses)

RGB color generation / 16 million colours

Colour temperature variable on a linear range (3.200°K÷5.500°K)

No infrared emission / no ultraviolet emission

LEDs average lifespan: 100.000 hours

Optical units can be interchanged by users (spot / medium flood / wide flood)

Interface: OLED display + 4 buttons / infrared remote control

Control signals: USITT DMX 512 USITT serial digital signals

15 DMX channels

Independent operation (Master / Slave)

Programmable automated playback (7 days)

Movement on 3 axes : Pan 320° / Tilt1 160°(Motorized); Tilt2 135°(Manual)

Safety-locking system

IP65 protection level

Professional HARTING / ILME sockets (IP65 protection rating)

Full range AC 90-260V, 50-60Hz power supply

Operating ambient temperature -10° / 40°

Weight: 24 Kg

ACCESSORIES

Lenses set spot (cod. 03.LK.004)

Lenses set medium flood (cod. 03.LK.005)

Lenses set wide flood (cod. 03.LK.006)

Flight case for 1 DELTA (cod. 0521C029)

Flight case for 2 DELTA (cod. 0521C030)

Safety wire (3mm x 60 cm), Ring spring catch (max. capacity load 60Kg) (Cod. 0521A010)

“C” Clamp GQUICK with “Fast Lock” connection ¼ turn (max. load 80Kg) (cod. 0521A014)

DELTA R

Dimensions (LxDxH)

projector 430 x 285 x 570 mm

Weight 24 Kg

Packaging Dimensions (LxDxH)

530 x 500 x 660 mm

Weight 30 Kg

1- TECHNICAL FEATURES

Delta 5 RGB R

108 X 1W Luxeon type LEDS (36 Red, 36 Green, 36 Blue)

2.400 Lumens / 2940 Lux at 5 m (spot lenses)

RGB color generation / 16 million colours

Colour temperature variable on a linear range (3.200°K÷5.500°K)

No infrared emission / no ultraviolet emission

LEDs average lifespan: 100.000 hours

Optical units can be interchanged by users (spot / medium /wide)

Interface: OLED display + 4 buttons / infrared remote control

Control signals: USITT DMX 512 USITT serial digital signals

15 DMX channels

Independent operation (Master / Slave)

Programmable automated playback (7 days)

Movement on 3 axes : Pan 320° / Tilt1 160°(Motorized); Tilt2 135°(Manual)

Safety-locking system

IP65 protection level

Professional HARTING / ILME sockets (IP65 protection rating)

Full range AC 90-260V, 50-60Hz power supply

Operating ambient temperature -10° / 40°

Weight: 24 Kg

ACCESSORIES

Lenses set spot (cod. 03.LK.008)

Lenses set medium flood (cod. 03.LK.001)

Lenses set wide flood (cod. 03.LK.002)

Flight case for 1 DELTA (cod. 0521C029)

Flight case for 2 DELTA (cod. 0521C030)

Safety wire (3mm x 60 cm), Ring spring catch (max. capacity load 60Kg) (Cod. 0521A010)

“C” Clamp GQUICK with “Fast Lock” connection ¼ turn (max. load 80Kg) (cod. 0521A014)

DELTA R

Packaging Dimensions (LxDxH)

530 x 500 x 660 mm

Weight 30 Kg

Dimensions (LxDxH)

projector 430 x 285 x 570 mm

Weight24 Kg

1- TECHNICAL FEATURES

Delta 7 RGB R

108 X 1W P4 type LEDS (36 Red, 36 Green, 36 Blue)

7.200 Lumens / 4.446 Lux at 5 m (spot lenses)

RGB color generation / 16 million colours

Colour temperature variable on a linear range (3.200°K÷5.500°K)

No infrared emission / no ultraviolet emission

LEDs average lifespan: 100.000 hours

Four interchangeable optical units (spot / medium flood /wide flood / very wide flood)

Interface: OLED display + 4 buttons / infrared remote control

Control signals: USITT DMX 512 USITT serial digital signals

15 DMX channels

Independent operation (Master / Slave)

Programmable automated playback (7 days)

Movement on 3 axes : Pan 320° / Tilt1 160°(Motorized); Tilt2 135°(Manual).

Safety-locking system

IP65 protection level

Professional HARTING / ILME sockets (IP65 protection rating)

Full range AC 90-260V, 50-60Hz power supply

Operating ambient temperature -10° / 40°

Weight: 24 Kg

ACCESSORIES

Lenses set spot (cod. 03.LK.008)

Lenses set medium flood (cod. 03.LK.001)

Lenses set wide flood (cod. 03.LK.002)

Flight case for 1 DELTA (cod. 0521C029)

Flight case for 2 DELTA (cod. 0521C030)

Safety wire (3mm x 60 cm), Ring spring catch (max. capacity load 60Kg) (Cod. 0521A010)

“C” Clamp GQUICK with “Fast Lock” connection ¼ turn (max. load 80Kg) (cod. 0521A014)

DELTA R

Packaging Dimensions (LxDxH)

530 x 500 x 660 mm

Weight 30 Kg

Dimensions (LxDxH)

projector 430 x 285 x 570 mm

Weight24 Kg

2- IMPORTANT SAFETY INFORMATION

2.1 Fire prevention:

-Never locate the fixture on any flammable surface.

-Minimum distance from flammable materials: 1 m.

-Minimum distance from the closest illuminable surface: 1 m.

-Replace any blown or damaged fuses only with those of identical value. Refer to the wiring diagram if

there is any doubt.

-Connect the projector to mains power via a thermal magnetic circuit breaker.

2.2 Prevention of electric shock:

-High voltage is present inside the unit. Isolate the projector from the mains supply prior to performing

any function which involves touching the inside of the unit.

-The level of technology inherent in the DELTA R requires the assistance of specialised personnel for all

servicing. Please refer to an authorised D.T.S. service centre.

-A good earth connection is essential for proper functioning of the projector.

Never connect the unit without proper earth connection.

-The fixture should be located in places with a good air ventilation.

2.3 Protection against direct light radiation:

-Never turn the unit on if any of the lenses or the glass lenses protection is damaged.

-Never look directly the LEDs when they are on.

2.4 Safety:

-The projector should always be installed with bolts, clamps and other tools that are capable of

supporting the weight of the unit.

-Always use a second safety chain to sustain the weight of the unit in case of the failure of the main

fixing point.

-The external surface of the unit, at various points, may exceed 80°C. Never handle the unit until it’s on.

-Never install the fixture in an enclosed area lacking sufficient air flow.

-The ambient temperature should not exceed 40°C.

2.5 Level of protection against the penetration of solid and liquid matter:

-The projector is classified as an ordinary appliance and its protection level against the penetration of

solid and liquid matter is IP 65.

DELTA R

3- VOLTAGE AND FREQUENCY:

Delta R can operate at 90-270V, 50 or 60 Hz.

4- INSTALLATION:

4.1 Safety cable:

4.2 Risk of fire:

Each fixture produces heat and must be installed in a well-ventilated position. The minimum

recommended distance from flammable material is 1m. Minimum distance from the object being

illuminated is 1 m.

Delta R may be either floor or ceiling mounted.

For floor mounting installations, the unit is supplied with four rubber mounting feet on the base.

For ceiling mounted installations, we reccommend the use of appropriate clamps to fix the unit to the

mounting surface.

The supporting structure from which the unit is hung should be capable of bearing the weight of the

unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to

move or shake whilst the Delta R is moving.

The Delta R is fitted with 4 fixing points on the bottom used to attach accessories (clamps, hooks, etc.)

With a fast lock closure/release system (1/4 turn) to fix the fixture in any position.

We recommend the use of a safety cable or chain connected to the Delta R and to the suspension truss

in order to avoid the fixture accidentally falling should the main fixing point fail. Make sure that the iron

cable or chain can bear the weight of the entire unit.

You may attach the safety chain to the holes located on the base of the fixture, as shown in the picture

below.

DELTA R

SAFETY CABLE

FIXING POINT

4.3 Ambient temperature:

The projector should never be installed in places that lack a constant air flow. The ambient temperature

should NOT exceed 40°C.

5- MAINS CONNECTION:

Delta R can operate at 90-270V, 50 or 60Hz.

For connection purposes, ensure that your plug can handle at least 300W power consuption.

Strict adherence to regulatory norms is strongly

Recommended.

5.1 Protection:

The use of a thermal magnetic circuit breaker is recommended for each Delta R.

A good earth connection is essential for the correct operation of the projector.

6- DMX SIGNAL CONNECTION:

The unit operates using a digital DMX 512 (1990) signal. Connection between the control box and the

projector or between projectors must be carried out using a two pair screened ø0.5 mm cable and a

CANNON XLR 5 or 3 pole connector.

P.S:

If the display showing the DMX address flashes, then one of the following errors has occurred:

- DMX signal not present

- DMX reception problem

Ensure that the conductors do not touch each other. Do not connect the cable ground to the XLR chassy.

The plug housing must be isolated. Connect the mixer signal to the DMX IN projector plug and connect

it to the next projector by connecting the DMX OUT plug on the first projector to the DMX IN plug of the

second one.

This way all the projectors are cascade connected.

4 2

1=GND

2=DATA-

3=DATA+

CONTROLLER

S T A N D A R D

D M X 5 1 2

OUT

DELTA R

OUT OUT

DMX IN

DMX OUT

FUSE: T 3,15A

Electronic ballast

90-260V 50 / 60Hz

MAINS

DELTA R

6.1 DMX Addresses:

DELTA R has 15 DMX control channels.

Here below are described the DMX channels addressing for the controller:

Projector 1 A001

Projector 2 A016 If you want to select the next projector, just add “15”

Projector 3 A031

….. A….

projector 6 A091

6.2 Selelcting the DMX address:

1) Press the UP-DOWN key until you reach the required DMX address. The numbers on the display will

start to flash (but the new DMX address hasn't yet been set).

2) Press ENTER to confirm your selection. The numbers on the display will stop flashing and the

projector is now controlled by the new DMX address.

TIPS: if you keep pushed the UP or DOWN keys, the channels are calculated more quickly and you get

a faster selection.

7- Movement

The projector has a maximum movement of 320° for Pan,160° for Tilt 1 and 135° for tilt 2

(7 mechanical steps 22,5° each).

DO NOT place any obstructions in the path of the projector's movement.

ENTER

DOWN

Tilt 2 mechanical regulation

TILT1 160°

Motorized

PAN 320°

TILT2 135°

Mechanical

8- DISPLAY FUNCTIONS

DISPLAY FUNCTIONS

The DELTA R display panel shows all the available functions . Using these functions, it is possible

to change some of the parameters and add some functions. Changing the D.T.S. setting can vary the

functions of the unit so that it does not respond to the DMX 512 used to control it. Carefully

follow the instructions below before carrying out any variations or selections.

DELTA R

1)GLOBAL SETTING MENU

LANGUAGE

DEFAULT PAGE

SECURITY

DEFAULT SETTING

SET DATE

SET TIME

UPDATE

DOWNLOAD

ABOUT

2)MODE SETTING MENU

MODE DMX

MODE RECORDER

MODE MASTER

MODE SLAVE

MODE IR

MODE MANUAL

MODE TWILIGHT

3)MOVING HEAD SETUP MENU

PAN MIN

PAN MAX

TILT MIN

TILT MAX

CALIBRATE PAN

CALIBRATE TILT

INVERT PAN

INVERT TILT

SWAP PAN & TILT

ENCODER

RESET PAN & TILT

SPEED PAN & TILT

4)LED SETUP MENU

COLOUR MODE

WHITE BALANCE

BOOST DRIVING

MIN RGB

MAX RGB

SMOOT FILTER

PWM FREQUENCY

5)DIPLAY SETTINGS MENU

CONTRAST

FLIP DISPLAY

SCREEN SAVER

6)MEASURE MENU

LIFE

DMX

VOLTAGE

TEMPERATURE

TWILIGHT

DELTA SOFTWARE RELEASE 1.72

DELTA R

1)GLOBAL SETTING MENU

LANGUAGE

DEFAULT PAGE

SECURITY

DEFAULT SETTING

SET DATE

SET TIME

UPDATE

DOWNLOAD

ABOUT

Up-Down

A001

GLOBAL SETTING

ENTER

Language

Up-Down

Up-DownENTER

Up-Down

LANGUAGE SELECTION

This menu allows to set the language

English = Default

Default Page

Up-Down

Up-DownENTER

Up-Down

DEFAULT PAGE SELECTION

This menu allows to set the

visualisation for the start up page

Four Digit = DMX address

visualisation

ENTER

Status = DMX / Color Mode / Boost

Power / Security

ENTER

Security

Up-Down

Up-DownENTER

SECURITY PASSWORD

This menu allows to select a security

password to lock the user’s settings

Default 0000 = no password

ENTER

Up-Down

Default Setting

Up-Down

DEFAULT SETTINGS

This menu allows to set the unit to

the company settings

ENTER

GAME,TIMER and WHITE SETTING

will not be changed

ENTER

Set Language

English

Set Default Page

Four Digit

Status

A001

Security Unlocked

Enter Security Code

0 0 0 0

Confirm Security Code

0 0 0 0

Restore Main Settings

ENTER to CONFIRM

& Reboot

Up-DownENTER

Up-Down

Universal Unlock code = 2903

Set Date

Up-Down

Up-DownENTER

Year 2007

Month Jan

Day of the month 01

Day of the week Mon

DATE SETTING

This menu allows to set the day of

the week the month and the year

ENTER

Set Date

Date settings for Stand Alone mode

DELTA R

Update

Up-Down

Up-DownENTER

UPDATE MENU

This menu allows to upgrade the

uni’s software by computer or

remote control

ENTER

Update the unit’s software from PC by

cable

Download

Up-Down

Up-DownENTER

DOWNLOAD MENU

This menu allows to save unit’s

programs into computer

ENTER

Download the unit’s program to PC by

cable

ABOUT

Up-Down

ENTER

About DELTA R

Master PCB 0514L019

Loader Version 1.02

HW Version 1.01

SW Version 1.61

Pan&Tilt PCB 0514S100

PAn&Tilt Version 2.05

ABOUT MENU

This menu shows information about

unit’s hardware and software

Up-Down

ENTER

Select UPDATE Mode

Direct to PC

ENTER to CONFIRM

Select DOWNLOAD Mode

Direct to PC

ENTER to CONFIRM

Unit’s hardware and software info

TIME SETTING

This menu allows to set the unit’s on

board clock for STAND ALONE

MODE

Set Time

Up-Down

Up-DownENTER

Real time internal clock setting

ENTER

Set Time

Hour 03

Minute 01

DELTA R

2)MODE SETTING MENU

MODE DMX

MODE RECORDER

MODE MASTER

MODE SLAVE

MODE IR

MODE MANUAL

MODE TWILIGHT

A001

MODE SETTINGS

Up-Down

ENTER

Mode DMX

Up-Down

Up-DownENTER

DMX ADDRESS SELECTION

This menu allows to set the unit’s

DMX address.

Set Address DMX

001

Address range 001-489

ENTER

Mode Recorder

In Manual Recording Mode,it is

possible to create and store the

steps of the chase by using the unit

display panel and buttons.

ENTER

Up-Down

Up-DownENTER

RECORDER MODE SETTING

This menu lets you create 2 different chases, CPR1

and CPR2 (16 steps each) that will then run in

Master Mode.

Two different recording modes are available:

1)Manual Recording Mode

2)DMX Recording Mode

RECORDER Mode

Input Mode MANUAL

Select Chase CPR1

RECORDER MANUAL

CPR1 STEP 01 EDIT

PAN 016 TILT 255

SHUTTER 009 DIMM 017

R 016 G 016 B 000

WHITE 012 CTC 000

MACRO 000

Three different options are available:

1)EDIT = Lets you modify and store

new values for all the channels on

the selected Step.

2)WIEV MEM = Lets you see the

existing programmed steps of the

chase

3)SET LAST = Lets you set the last

step to be run on the chase.

In DMX Recording Mode,it is

possible to create and store the

steps of the chases by using an

external DMX controller.

ENTER

RECORDER Mode

Input Mode DMX

Select Chase CPR1

Warning 18 channels !

RECORDER DMX

CPR1 STEP 01 EDIT

PAN 016 TILT 255

SHUTTER 009 DIMM 017

R 016 G 016 B 000

WHITE 012 CTC 000

MACRO 000

2)DMX Recorder Mode

To program CPR1 and CPR2 by using a DMX controller,

3 more DMX channels are needed in addition to the 15

channels necessary to control the unit.

So that in RECORDER mode (via DMX) the unit will

need 18 channels to be correctly programmed.

The 3 new DMX channels are:

DMX channel 16 = STEPS channel

From 0 - 15 = VIEW DMX, the unit shows the values

received from the DMX controller in that moment.

From 16 – 255, the previously programmed steps (16

steps from 01 to 16) are displayed.

DMX channel 17 = VIEW / EDIT / SET LAST channel

If channel 16 (STEPS channel) is set to value 0 - 15,

the DMX channel 17 has no functions.

If channel 16 (STEPS channel) is set to value 16 - 255,

the DMX channel 17 has the following functions:

From 0 - 19 = VIEW MEM, the unit shows the

previously programmed steps.

From 20 - 234 = EDIT, the unit runs the configuration

given by the DMX controller in that moment.

1)Manual Recording Mode

With the STEPS channel it is possible to select the step to create, while with REC channel it is possible to store the configuration on the selected step.-

From 234 - 255 = SET LAST, the unit runs the configuration given by the DMX controller in that moment closing the Program as last step.

With the REC channel it is possible to record the selected step as last step to be run on the Program.

DMX channel 18 = REC channel

REC channel saves the configuration given by the DMX controller in the selected step: you change the DMX value from 0 to 255 (the display shows

“WRITING” indicating that the step has been recorded). We suggest to keep the REC channel set to 0 and to run through the 255 only once you have

decided to save the new configuration. If CPR1 or CPR2 are not closed, by indicating the last step (Edit channel between 235-255), all 16 steps will be

played through in playback mode, even if not programmed.

WARNING !

To program CPR1 and CPR2 by using

a DMX controller, 3 more DMX

channels are needed in addition to

the 15 channels necessary to control

the unit.

Mode Master

The Delta set as MASTER, sends

DMX signal to all the other units

connected to the same DMX line

ENTER

Master Mode

Set CHASE CPR1

Set TIME Sec 0025

Set WAIT Sec 0015

Up-Down

Up-DownENTER

MASTER MODE SETTING

This menu allows to set Delta R as

master unit (No DMX signal must

be present on unit’s DMX input

panel) .

The unit will run in automatic mode

without needing of an external

controller.

Different chases are selectable by

user

ENTER

Set MASTER MODE

Mode : MASTER

Actual : DMX

ENTER to CONFIRM

Up-Down

DELTA R

CRNB

Rainbow colours effect.

Time and Pan&Tilt selectable by

user

CUE 1-9

Color Macros with fixed colors

Pan&Tilt selectable by user

CPR1/CPR2/CPR1&2

Chases with 16 steps previously

created in RECORDER mode.

Time and Wait time selectable by

user

By setting all the units connected to

the MASTER, to DMX address 1,

they will be sinchronized with the

Master unit following the chase

selected on it, including TIME, WAIT

and Pan&Tilt position of the MASTER

unit.

By setting all the units connected to

the MASTER, as SLAVE unit (see

SLAVE mode), they will be

sinchronized with the Master unit

only for TIME and WAIT time, but

running their own chase CPR1/CPR2

with dedidicated Pan&Tilt position,

colors and effects.

Mode Slave

ENTER

The SLAVE unit receives DMX signal

from the MASTER unit

Up-Down

Up-DownENTER

SLAVE MODE SETTING

This menu allows to set the Delta R

as slave unit.

DMX signal must be present from

MASTER unit in order to run in

SLAVE mode.

Set SLAVE MODE

Mode : SLAVE

Actual : DMX

ENTER to CONFIRM

By setting all the units connected to

the MASTER as SLAVE units, they

will be sinchronized with the Master

unit only for TIME and WAIT time,

but running their own chase

CPR1/CPR2 with dedidicated

Pan&Tilt position, colors and effects.

Mode IR

ENTER

The unit is controlled by the infrared

remote control

Up-Down

Up-DownENTER

IR MODE SETTING

By activating IR mode on Delta unit

it will be possible to navigate

trought the unit functions by using

the D.T.S. infrared remote control

(D.T.S. Code :0514L008).

INFRARED REMOTE CONTROL

By activating IR mode on Delta unit it will be possible to navigate

trought the unit functions by using the D.T.S. infrared remote

control (D.T.S. Code :0514L008).

Infrared remote control functions:

ON/OFF and MUTE buttons

In Master/Slave mode let you stop the games running.

Master and slave units will go in Stand-by mode

1-9 buttons

Let you select the chase to run (CPR1/CPR2/CRNB/CUE 1-6)

1-/.. Button

Let you select the chase to run (CUE 7-9)

VOL +/-

No function

PROG +/-

Let you scroll between the selectable chases

RED/GREEN/YELLOW/BLUE buttons

Direct acces to cues for Red/Green/Blue/Yellow colour.

Red=CUE1 / Green=CUE3 / Yellow=CUE2 / Blue=CUE5

Navigation buttons

Same as UP/DOWN on unit display

OK button

Same as ENTER on unit display

MENU button

Same as MENU on unit display

ON/OFF

Button

1-9

Buttons

1-/..

Button

VOL +/-

Buttons

PROG +/-

Buttons

R-G-Y-B

Buttons

NAVIGATION

Buttons

Button

DELTA R

Set IR MODE

Mode : IR

Actual : DMX

ENTER to CONFIRM

Mode Manual

ENTER

In MANUAL mode it is possible to

adjust all the unit functions by using

UP/DOWN and ENTER buttons:

PAN H

PAN L

TILT H

TILT L

SPEED PAN&TILT

SHUTTER

DIMMER

RED

GREEN

BLUE

WHITE

CTC

MACRO

FUNCTION

RESET

Up-Down

Up-DownENTER

Set MANUAL MODE

Mode : MANUAL

Actual : DMX

ENTER to CONFIRM

MANUAL MODE SETTING

This menu lets you control Delta unit in manual

mode by using the unit display.

In MANUAL mode, no external controller is

needed.

MAN Mode Enter VALUES

Channel Value

PAN H 128

DELTA R

TWILIGHT MODE

Up-Down

Up-DownENTER

TWILIGHT MODE MENU

This menu allows to set the unit in

Twilight mode.

Twilight mode lets you turn ON and

OFF the unit at a specific clock time

(including day of the week) and/or

at a specific twilight level.

The Twilight mode makes use of a

twilight sensor located on the front

panel near unit display.

To know the twilight ambient level

value measured from the sensor,

scroll the unit menu till MEASURE

Mode and select Twilight.

ENTER

The unit is switched on and off at

the desired twilight level or/and

at a specific clock time.

3)MOVING HEAD SETUP MENU

PAN MIN

PAN MAX

TILT MIN

TILT MAX

CALIBRATE PAN

CALIBRATE TILT

INVERT PAN

INVERT TILT

SWAP PAN & TILT

ENCODER

RESET PAN & TILT

SPEED PAN & TILT

Set TWILIGHT MODE

Mode : TWILIGHT

Actual : DMX

ENTER to CONFIRM

TWILIGHT Mode

ACTION CPR1

LEVEL ON 100 OFF 150:

TIME CONDIT INCLUSIVE

DAY Mon START 22:00

TIME ON 10:00

ACTION :

Lets you select the desired

function in twilight mode.

You can choose between: DMX /

CPR1 / CPR2 / CPR1&2 / CRNB /

CUE 1-9 /

LEVEL ON and OFF :

Lets you select the desired twilight

levels for:

Twilight mode ON and OFF.

TIME CONDITION:

Four different options are available:

1) INACTIVE

Clock time (START) and Time on period (TIME ON), are inactive.

In this condition the unit goes ON only if the twilight level is valid

2)COMBINED

Clock time (START), Time on period (TIME ON) and Twilight level are active.

In this condition, the unit goes ON only if all the parameters are valid.

3)INCLUSIVE

Clock time (START), Time on period (TIME ON) and Twilight level are active.

In this condition, the unit goes ON also if only one of the paramete is valid.

4)EXCLUSIVE

Clock time (START) and Time on period (TIME ON), are active, while Twilight level is inactive.

In this condition, the unit goes ON only if Clock time (START) is valid.

Up-Down

A001

MOVING HEAD SETUP

ENTER

Up-Down

Up-DownENTER

PAN MINIMUM POSITION

This menu allows to set the Pan

minimum position (Default =000)

Pan Max

Up-Down

Up-DownENTER

PAN MAXIMUM POSITION

This menu allows to set Pan

maximum position (Default = 255)

Pan Min

Up-Down

Up-DownENTER

TILT MINIMUM POSITION

This menu allows to set the Tilt

minimum position in degrees

(Default =000)

Tilt Min

Setting Pan Min

Pan Min : 000

Range 000-255

Default = 000

ENTER

Setting Pan Max

Pan Man : 000

Range 255-000

Default = 255

ENTER

Setting Tilt Min

Tilt Min : 000

Range 000-255

Default = 000

ENTER

Up-Down

A001

MOVING HEAD SETUP

ENTER

DELTA R

Calibrate Pan

Up-Down

Up-DownENTER

PAN CALIBRATION

This menu allows to calibrate Pan

home position (Default = 105)

Calibrate Tilt

Up-Down

Up-DownENTER

TILT CALIBRATION

This menu allows to calibrate Tilt

home position (Default = 128)

Tilt Max

Setting Tilt Max

Tilt Max : 000

Range 000-255

ENTER

Up-Down

Up-DownENTER

TILT MAXIMUM POSITION

This menu allows to set the Tilt

maximum position (Default = 255)

Calibrating Pan

Pan : 105

Calibrating Tilt

Tilt : 105

Range 000-255

ENTER

Range 255-000

Default = 255

ENTER

DELTA R

Invert Pan

Up-Down

Up-DownENTER

PAN INVERSION

This menu allows to set the Pan

movement.

Normal or Inverted

Invert Tilt

Up-Down

Up-DownENTER

TILT INVERSION

This menu allows to set the Tilt

movement.

Normal or Inverted

Swap Pan&Tilt

Up-Down

Up-DownENTER

PAN&TILT SWAP

This menu allows to invert the

control of Pan with the control of

Tilt.

IMPORTANT: (During PAN/TILT MIN,PAN/TILT MAX and PAN/TILT CALIBRATE setting,PAN/TILT INVERT and PAN/TILT SWAP are disabled

Encoder

Set PAN INVERTION

Pan : Normal

Actual Normal

Pan movement Normal or Inverted

Default = Normal

ENTER

Set TILT INVERTION

Tilt : Normal

Actual Normal

Tilt movement Normal or Inverted

Default = Normal

ENTER

Set Pan/Tilt SWAPPING

Swap : Normal

Actual Normal

Pan control inverted with Tilt control

and vice versa

Default = Normal

ENTER

Set Encoder Status

Encoder : Active

Actual Active

Pan/Tilt auto-repositioning system

enabled or disabled

Default = Active

ENTER

Up-Down

Up-DownENTER

ENCODER SETTING

This menu allows to enable/disable

the auto-repositioning function for

Pan and Tilt

Resetting Pan & Tilt

PRESS ENTER

To RESET Pan & Tilt

PAN&TILT RESET

This menu allows to reset Pan and

Tilt Motors

Reset Pan & Tilt

Up-Down

ENTER

Pan &Tilt motors reset

ENTER

Set SPEED MAX P&T

Speed MAX % 100

PAN & TILT MAXIMUM SPEED

This menu allows to set the

maximum speed for Pan & Tilt

movement.

Speed Pan & Tilt

Up-Down

Up-DownENTER

Pan&Tilt maximum motor speed

Selectable between 25-100%

ENTER

La pagina sta caricando ...

DTS DELTA 5-7 RGB R Manuale utente

Marca: DTS

Modello: DELTA 5-7 RGB R

Categoria: Proiettori

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: DTS DELTA 5-7 RGB R User manual

DTS DELTA 5-7 RGB R Manuale utente

Questo manuale è adatto anche per

DTS DELTA 5-7 RGB R Manuale utente

in altre lingue

Documenti correlati