ASROCK K10N78 Manuale del proprietario

11

1

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

Copyright Notice:Copyright Notice:

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documen-

tation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifica-

tion or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or omissions

that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose. In no event shall

ASRock, its directors, officers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits, loss of

business, loss of data, interruption of business and the like), even if ASRock has been

advised of the possibility of such damages arising from any defect or error in the guide

or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Published August 2008

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

22

2

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

Motherboard Layout (K10N78-1394)Motherboard Layout (K10N78-1394)

Motherboard Layout (K10N78-1394)

1 PS2_USB_PW1 Jumper 20 System Panel Header (PANEL1, Orange)

2 ATX 12V Power Connector (ATX12V1) 21 Chassis Speaker Header

3 CPU Fan Connector (CPU_FAN1) (SPEAKER 1, Purple)

4 CPU Heatsink Retention Module 22 Chassis Fan Connector (CHA_FAN1)

5 AM2 940-Pin CPU Socket 23 Floppy Connector (FLOPPY1)

6 2 x 240-pin DDR2 DIMM Slots 24 Infrared Module Header (IR1)

(Dual Channel A: DDRII_1, DDRII_2; Yellow) 25 Internal Audio Connector: CD1 (Black)

7 2 x 240-pin DDR2 DIMM Slots 26 Front Panel Audio Header

(Dual Channel B: DDRII_3, DDRII_4; Orange) (HD_AUDIO1, Lime)

8 Primary IDE Connector (IDE1, Blue) 27 USB/WiFi Header (USB/WIFI, Yellow)

9 Clear CMOS Jumper (CLRCMOS1) 28 PCI Slots (PCI1- 3)

10 SATAII Connector (SATAII_5 (PORT4), Red) 29 HDMI_SPDIF Header (HDMI_SPDIF1, Yellow)

11 SATAII Connector (SATAII_6 (PORT5), Orange) 30 Front Panel IEEE 1394 Header

12 SATAII Connector (SATAII_4 (PORT3), Red) (FRONT_1394, Red)

13 SATAII Connector (SATAII_2 (PORT1), Red) 31 PCI Express x1 Slot (PCIE3, White)

14 USB 2.0 Header (USB8_9, Blue) 32 PCI Express x1 Slot (PCIE2, White)

15 USB 2.0 Header (USB6_7, Blue) 33 PCI Express x16 Slot (PCIE1, Green)

16 SATAII Connector (SATAII_1 (PORT0), Red) 34 Serial Port Connector (COM1)

17 SPI BIOS Chip 35 ATX Power Connector (ATXPWR1)

18 SATAII Connector (SATAII_3 (PORT2), Red) 36 eSATAII Connector (eSATAII_TOP, Orange)

19 NVIDIA GeForce 8200 Chipset

33

3

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

Motherboard Layout (K10N78)Motherboard Layout (K10N78)

Motherboard Layout (K10N78)

1 PS2_USB_PW1 Jumper 19 NVIDIA GeForce 8200 Chipset

2 ATX 12V Power Connector (ATX12V1) 20 System Panel Header (PANEL1, Orange)

3 CPU Fan Connector (CPU_FAN1) 21 Chassis Speaker Header

4 CPU Heatsink Retention Module (SPEAKER 1, Purple)

5 AM2 940-Pin CPU Socket 22 Chassis Fan Connector (CHA_FAN1)

6 2 x 240-pin DDR2 DIMM Slots 23 Floppy Connector (FLOPPY1)

(Dual Channel A: DDRII_1, DDRII_2; Yellow) 24 Infrared Module Header (IR1)

7 2 x 240-pin DDR2 DIMM Slots 25 Internal Audio Connector: CD1 (Black)

(Dual Channel B: DDRII_3, DDRII_4; Orange) 26 Front Panel Audio Header

8 Primary IDE Connector (IDE1, Blue) (HD_AUDIO1, Lime)

9 Clear CMOS Jumper (CLRCMOS1) 27 USB/WiFi Header (USB/WIFI, Yellow)

10 SATAII Connector (SATAII_5 (PORT4), Red) 28 PCI Slots (PCI1- 3)

11 SATAII Connector (SATAII_6 (PORT5), Red) 29 HDMI_SPDIF Header (HDMI_SPDIF1, Yellow)

12 SATAII Connector (SATAII_4 (PORT3), Red) 30 PCI Express x1 Slot (PCIE3, White)

13 SATAII Connector (SATAII_2 (PORT1), Red) 31 PCI Express x1 Slot (PCIE2, White)

14 USB 2.0 Header (USB8_9, Blue) 32 PCI Express x16 Slot (PCIE1, Green)

15 USB 2.0 Header (USB6_7, Blue) 33 Serial Port Connector (COM1)

16 SATAII Connector (SATAII_1 (PORT0), Red) 34 ATX Power Connector (ATXPWR1)

17 SPI BIOS Chip

18 SATAII Connector (SATAII_3 (PORT2), Red)

44

4

ASRock K10N78-1394 / K10N78 Motherboard

I/O PI/O P

I/O P

anel (K10N78-1394)anel (K10N78-1394)

anel (K10N78-1394)

EnglishEnglish

English

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will find “Mixer” tool on your system.

Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click

“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA

Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek

HDA Audio 2nd output” to use front panel audio.

** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker

(No. 10) (No. 7) (No. 8) (No. 6)

2 V -- -- --

4VV----

6 VVV--

8 VVVV

1 PS/2 Mouse Port (Green) 9 Line In (Light Blue)

2 VGA/D-Sub Port ** 10 Front Speaker (Lime)

3 USB 2.0 Ports (USB45) 11 Microphone (Pink)

4 IEEE 1394 Port 12 USB 2.0 Ports (USB01)

* 5 LAN RJ-45 Port 13 USB 2.0 Ports (USB23)

6 Side Speaker (Gray) 14 eSATAII Port

7 Rear Speaker (Black) 15 VGA/DVI-D Port

8 Central / Bass (Orange) 16 PS/2 Keyboard Port (Purple)

LAN Port

ACT/LINK

LED

SPEED

LED

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Activity Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

Green 1Gbps connection

55

5

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will find “Mixer” tool on your system.

Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click

“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA

Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek

HDA Audio 2nd output” to use front panel audio.

** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker

(No. 8) (No. 5) (No. 6) (No. 4)

2 V -- -- --

4VV----

6 VVV--

8 VVVV

1 PS/2 Mouse Port (Green) ** 8 Front Speaker (Lime)

2 VGA/D-Sub Port 9 Microphone (Pink)

* 3 LAN RJ-45 Port 10 USB 2.0 Ports (USB01)

4 Side Speaker (Gray) 11 USB 2.0 Ports (USB23)

5 Rear Speaker (Black) 12 USB 2.0 Ports (USB45)

6 Central / Bass (Orange) 13 VGA/DVI-D Port

7 Line In (Light Blue) 14 PS/2 Keyboard Port (Purple)

I/O PI/O P

I/O P

anel (K10N78)anel (K10N78)

anel (K10N78)

LAN Port

T/LINK

ED

SPEED

LED

LAN Port

ACT/LINK

LED

SPEED

LED

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Activity Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

Green 1Gbps connection

66

6

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

1.1.

1.

IntroductionIntroduction

Introduction

Thank you for purchasing ASRock K10N78-1394 / K10N78 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control. It de-

livers excellent performance with robust design conforming to ASRock’s commit-

ment to quality and endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-

step installation guide. More detailed information of the motherboard can be found in

the user manual presented in the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.11.1

1.1

Package ContentsPackage Contents

Package Contents

ASRock K10N78-1394 / K10N78 Motherboard

(ATX Form Factor: 12.0-in x 8.4-in, 30.5 cm x 21.3 cm)

ASRock K10N78-1394 / K10N78 Quick Installation Guide

ASRock K10N78-1394 / K10N78 Support CD

One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable

One Ribbon Cable for a 3.5-in Floppy Drive

Two Serial ATA (SATA) Data Cables (Optional)

One Serial ATA (SATA) HDD Power Cable (Optional)

One I/O Panel Shield

77

7

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

1.21.2

1.2

SpecificationsSpecifications

Specifications

Platform - ATX Form Factor: 12.0-in x 8.4-in, 30.5 cm x 21.3 cm

- Solid Capacitor for CPU power (K10N78-1394)

CPU - Support for Socket AM2+ / AM2 processors: AMD Phenom

TM

FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon

X2 Dual-Core / Athlon 64 / Sempron

processor

- Supports CPU up to 140W

- AMD LIVE!

TM

Ready

- Supports AMD’s Cool ‘n’ Quiet

TM

Technology

- FSB 2600 MHz (5.2 GT/s) (see CAUTION 1)

- Supports Untied Overclocking Technology (see CAUTION 2)

- Supports Hyper-Transport 3.0 (HT 3.0) Technology

Chipset - NVIDIA

®

GeForce 8200

Memory - Dual Channel DDR2 Memory Technology (see CAUTION 3)

- 4 x DDR2 DIMM slots

- Support DDR2 1066/800/667/533 non-ECC, un-buffered

memory (see CAUTION 4)

- Max. capacity of system memory: 16GB (see CAUTION 5)

Expansion Slot - 1 x PCI Express 2.0 x16 slot (green @ x16 mode)

- 2 x PCI Express x1 slots

- 3 x PCI slots

- Supports NVIDIA

®

Hybrid SLI

TM

(see CAUTION 6)

Graphics - Integrated NVIDIA

®

GeForce8 Series

- DX10 VGA, Pixel Shader 4.0

- Max. shared memory 512MB (see CAUTION 7)

- Dual VGA Output: support DVI-D and D-Sub ports by

independent display controllers

- Supports HDCP function with DVI-D port

- Supports 1080p Blu-ray (BD) / HD-DVD playback with

DVI-D port (see CAUTION 8)

- NVIDIA

®

PureVideo

TM

HD Ready

Audio - 7.1 CH Windows

®

Vista

TM

Premium Level HD Audio

(ALC888 Audio Codec)

- Chipset embeded HDMI Audio

LAN - Gigabit LAN 10/100/1000 Mb/s

- Giga PHY Realtek RTL8211BCL-GR

- Supports Wake-On-LAN

88

8

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x VGA/D-Sub Port

- 1 x VGA/DVI-D Port

- 6 x Ready-to-Use USB 2.0 Ports

- 1 x eSATAII Port (K10N78-1394)

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

- 1 x IEEE 1394 Port (K10N78-1394)

- HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/

Line in/Front Speaker/Microphone (see CAUTION 9)

Connector - 6 x SATAII 3.0Gb/s connectors, support RAID (RAID 0,

RAID 1, RAID 0+1, RAID 5 and JBOD), NCQ, AHCI and “Hot

Plug” functions (see CAUTION 10)

- 1 x eSATAII 3.0Gb/s connector (shared with 1 SATAII

connector) (K10N78-1394) (see CAUTION 11)

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x IR header

- 1 x COM port header

- 1 x HDMI_SPDIF header

- 1 x IEEE 1394 header (K10N78-1394)

- CPU/Chassis FAN connector

- 24 pin ATX power connector

- 8 pin 12V power connector

- CD in header

- Front panel audio connector

- 2 x USB 2.0 headers (support 4 USB 2.0 ports)

(see CAUTION 12)

- 1 x USB/WiFi header (see CAUTION 13)

BIOS Feature - 8Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- AMBIOS 2.3.1 Support

- CPU, DRAM, Chipset Core, HTT Voltage Multi-adjustment

- Supports Smart BIOS

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version)

99

9

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

CAUTION!

1. If you install AM2 CPU on this motherbord, the system bus speed will be HT1.

0 (2000 MT/s). If you install AM2+ CPU on this motherbord, the system bus

speed will be HT3.0 (up to 5200 MT/s), and the HT Link frequency depends on

the ability of the AM2+ CPU you adopt. Please refer to the CPU support list

on our website for more information.

ASRock website http://www.asrock.com

2. This motherboard supports Untied Overclocking Technology. Please read “Un-

tied Overclocking Technology” on page 36 for details.

3. This motherboard supports Dual Channel Memory Technology. Before you

implement Dual Channel Memory Technology, make sure to read the

installation guide of memory modules on page 16 for proper installation.

4. Whether 1066MHz memory speed is supported depends on the AM2+ CPU

you adopt. If you want to adopt DDR2 1066 memory module on this

motherboard, please refer to the memory support list on our website for

the compatible memory modules.

ASRock website http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

Unique Feature - ASRock OC Tuner (see CAUTION 14)

- Intelligent Energy Saver (see CAUTION 15)

- Hybrid Booster:

- CPU Frequency Stepless Control (see CAUTION 16)

- ASRock U-COP (see CAUTION 17)

- Boot Failure Guard (B.F.G.)

- ASRock AM2 Boost: ASRock Patented Technology to boost

memory performance up to 12.5% (see CAUTION 18)

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft

®

Windows

®

XP / XP Media Center / XP 64-bit / Vista

TM

/ Vista

TM

64-bit compliant

Certifications - FCC, CE, WHQL

* For detailed product information, please visit our website: http://www.asrock.com

1010

10

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

5. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

®

XP

and Windows

®

Vista

TM

. For Windows

®

XP 64-bit and Windows

®

Vista

TM

64-

bit with 64-bit CPU, there is no such limitation.

6. Hybrid SLI

TM

feature should depend on the driver from NVIDIA

®

and it may be

updated in the future. As long as we have the latest Hybrid SLI

TM

driver, we will

update it to our website. Please visit our website for the updated Hybrid SLI

TM

driver in the future. For the operation procedures, please refer to “Hybrid SLI

TM

Operation Guide” on page 19.

7. The maximum shared memory size is defined by the chipset vendor and

is subject to change. Please check NVIDIA

®

website for the latest

information.

8. 1080p Blu-ray (BD) / HD-DVD playback support on this motherboard requires

the proper hardware configuration. Please refer to page12 and 13 for the

minimum hardware requirement and the passed 1080p Blu-ray (BD) / HD-DVD

films in our lab test.

9. For microphone input, this motherboard supports both stereo and mono modes.

For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,

and 8-channel modes. Please check the table on page 4 and 5 for proper

connection.

10. Before installing SATAII hard disk to SATAII connector, please read the “SATAII

Hard Disk Setup Guide” on page 41 of “User Manual” in the support CD to

adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA

hard disk to SATAII connector directly.

11. This motherboard supports eSATAII interface, the external SATAII

specification. Please read “eSATAII Interface Introduction” on page 33 for

details about eSATAII and eSATAII installation procedures.

12. Power Management for USB 2.0 works fine under Microsoft

®

Windows

®

Vista

TM

64-bit / Vista

TM

/ XP 64-bit / XP SP1 or SP2.

13. USB/WiFi header can be used to support 2 USB 2.0 ports. It can also be

used to support WiFi+AP function with ASRock WiFi-802.11g or WiFi-802.

11n module, an easy-to-use wireless local area network (WLAN) adapter. It

allows you to create a wireless environment and enjoy the convenience of

wireless network connectivity. Please visit our website for the availability

of ASRock WiFi-802.11g or WiFi-802.11n

module. ASRock website http://www.asrock.com

14. It is a user-friendly ASRock overclocking tool which allows you to surveil

your system by hardware monitor function and overclock your hardware

devices to get the best system performance under Windows

®

environment.

Please visit our website for the operation procedures of ASRock OC

Tuner. ASRock website: http://www.asrock.com

15. Featuring an advanced proprietary hardware and software design,

Intelligent Energy Saver is a revolutionary technology that delivers

unparalleled power savings. The voltage regulator can reduce the

number of output phases to improve efficiency when the CPU cores are

idle. In other words, it is able to provide exceptional power saving and

improve power efficiency without sacrificing computing performance.

1111

11

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

To use Intelligent Energy Saver function, please enable Cool ‘n’ Quiet

option in the BIOS setup in advance. Please visit our website for the

operation procedures of Intelligent Energy Saver.

ASRock website: http://www.asrock.com

16. Although this motherboard offers stepless control, it is not recommended

to perform over-clocking. Frequencies other than the recommended CPU

bus frequencies may cause the instability of the system or damage the

CPU.

17. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC system.

18. This motherboard supports ASRock AM2 Boost overclocking technology for

AM2 CPU. If you enable this function in the BIOS setup, the memory perfor-

mance will improve up to 12.5%, but the effect still depends on the AM2 CPU

you adopt. Enabling this function will overclock the chipset/CPU reference

clock. However, we can not guarantee the system stability for all CPU/DRAM

configurations. If your system is unstable after AM2 Boost function is enabled,

it may not be applicative to your system. You may choose to disable this

function for keeping the stability of your system.

1212

12

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

1.31.3

1.3

Minimum Hardware Requirement for 1080p Blu-rayMinimum Hardware Requirement for 1080p Blu-ray

Minimum Hardware Requirement for 1080p Blu-ray

(BD) / HD-DVD Playback Support(BD) / HD-DVD Playback Support

(BD) / HD-DVD Playback Support

1080p Blu-ray (BD) / HD-DVD playback support on this motherboard

requires the proper hardware configuration. Please refer to below table

for the minimum hardware requirement.

CPU AMD Phenom X3 8400

VGA Onboard VGA with DVI-D port

Memory Dual Channel DDR2 533, 1GB x 2

Suggested OS Windows

®

Vista

TM

or Windows

®

Vista

TM

64

* Currently, 1080p Blu-ray (BD) / HD-DVD playback is only supported under Windows

®

Vista

TM

/ Vista

TM

64-bit OS. If you install Windows

®

XP / XP 64-bit OS, the function of

1080p Blu-ray (BD) / HD-DVD playback is not available, please visit our website for

NVIDIA

®

driver update in the future.

ASRock website http://www.asrock.com

1313

13

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

1.41.4

1.4

Passed 1080p Blu-ray (BD) / HD-DVD Films in Our LabPassed 1080p Blu-ray (BD) / HD-DVD Films in Our Lab

Passed 1080p Blu-ray (BD) / HD-DVD Films in Our Lab

TT

T

estest

est

DVD Film Name Format Producer

Type

Blu-ray SWORDFISH VC-1 WB

DVD UNDERWORLD EVOLUTION MPEG-2 SONY

X-MEN III MPEG-4-AVC FOX

SPEED MPEG-4-AVC FOX

CASINO ROYALE MPEG-4-AVC SONY

THE LEAGUE OF MPEG-4-AVC FOX

EXTRAORDINARY GENTLEMEN

HD- KING KONG VC-1 UNIVERSAL

DVD NEW ORLEANS CONCERT MPEG-2 WEA

ONE SIX RIGHT MPEG-2 TERWILLIGER

* MPEG-4-AVC mentioned above refers to the same format of H.264.

* Above passed films are tested under below configuration.

Items Configurations

CPU AMD Phenom X3 8400

VGA Onboard VGA with DVI-D port

Memory Dual Channel DDR2 533, 1GB x 2

OS Windows

®

Vista

TM

or Windows

®

Vista

TM

64

Playback Software CyberLink PowerDVD Ultra

DVD Player Blu-ray-DVDRW-LG-GBW-H10N (BD)

HD DVD-HP-TOSD-H802A-01 (HD-DVD)

1414

14

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

2.2.

2.

InstallationInstallation

Installation

This is an ATX form factor (12.0-in x 8.4-in, 30.5 cm x 21.3 cm) motherboard.

Before you install the motherboard, study the configuration of your chassis to en-

sure that the motherboard fits into it.

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

1. Unplug the power cord from the wall socket before touching any

component.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the carpet or

the like. Also remember to use a grounded wrist strap or touch a

safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the motherboard

to the chassis, please do not over-tighten the screws! Doing so may

damage the motherboard.

1515

15

ASRock K10N78-1394 / K10N78 Motherboard

2.12.1

2.1

CPU InstallationCPU Installation

CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90

o

angle.

Step 2. Position the CPU directly above the socket such that the CPU corner with

the golden triangle matches the socket corner with a small triangle.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU

into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push

down the socket lever to secure the CPU. The lever clicks on the side tab

to indicate that it is locked.

2.22.2

2.2

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a

larger heatsink and cooling fan to dissipate heat. You also need to spray

thermal grease between the CPU and the heatsink to improve heat

dissipation. Make sure that the CPU and the heatsink are securely fas-

tened and in good contact with each other. Then connect the CPU fan to

the CPU FAN connector (CPU_FAN1, see Page 2/3, No. 3). For proper

installation, please kindly refer to the instruction manuals of the CPU fan

and the heatsink.

STEP 1:

Lift Up The Socket Lever

STEP 2 / STEP 3:

Match The CPU Golden Triangle

To The Socket Corner Small

Triangle

STEP 4:

Push Down And Lock

The Socket Lever

Lever 90° Up

CPU Golden Triangle

Socket Corner

Small Triangle

EnglishEnglish

English

1616

16

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

2.3 Installation of Memory Modules (DIMM)2.3 Installation of Memory Modules (DIMM)

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR2 (Double Data Rate 2) DIMM slots,

and supports Dual Channel Memory Technology. For dual channel configuration,

you always need to install identical (the same brand, speed, size and chip-

type) DDR2 DIMM pair in the slots of the same color. In other words, you have to

install identical DDR2 DIMM pair in Dual Channel A (DDRII_1 and DDRII_2;

Yellow slots; see p.2/3 No.6) or identical DDR2 DIMM pair in Dual Channel B

(DDRII_3 and DDRII_4; Orange slots; see p.2/3 No.7), so that Dual Channel Memory

Technology can be activated. This motherboard also allows you to install four

DDR2 DIMMs for dual channel configuration, and please install identical DDR2

DIMMs in all four slots. You may refer to the Dual Channel Memory Configuration

Table below.

Dual Channel Memory Configurations

DDRII_1 DD RII_2 DDRII_3 DDRII_4

(Yellow Slot) (Yellow Slot) (Orange Slot) (Orange Slot)

(1) Populated Populated - -

(2) - - Populated Populated

(3)* Populated Populated Populated Populated

* For the configuration (3), please install identical DDR2 DIMMs in all four

slots.

1. If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them either in the set of yellow

slots (DDRII_1 and DDRII_2), or in the set of orange slots (DDRII_3

and DDRII_4).

2. If only one memory module or three memory modules are installed

in the DDR2 DIMM slots on this motherboard, it is unable to activate

the Dual Channel Memory Technology.

3. If a pair of memory modules is NOT installed in the same Dual

Channel, for example, installing a pair of memory modules in DDRII_1

and DDRII_3, it is unable to activate the Dual Channel Memory

Technology .

4. It is not allowed to install a DDR memory module into DDR2 slot;

otherwise, this motherboard and DIMM may be damaged.

1717

17

ASRock K10N78-1394 / K10N78 Motherboard

Installing a DIMMInstalling a DIMM

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the

slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

EnglishEnglish

English

1818

18

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

2.4 Expansion Slots (PCI and PCI Express Slots)2.4 Expansion Slots (PCI and PCI Express Slots)

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 3 PCI slots and 3 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots:

PCIE1 (PCIE x16 slot; Green) is used for PCI Express cards with x16

lane width graphics cards.

PCIE2 / PCIE3 (PCIE x1 slot; White) is used for PCI Express cards with

x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in

a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the

screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

1919

19

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

2.52.5

2.5

Hybrid SLIHybrid SLI

Hybrid SLI

TMTM

TM

Operation Guide Operation Guide

Operation Guide

This motherboard supports NVIDIA

®

Hybrid SLI

TM

feature. Hybrid SLI

TM

technology,

based on NVIDIA

®

’ s industry-leading SLI

TM

technology, delivers multi-GPU (graphics

processing unit) benefits when an NVIDIA

®

motherboard GPU is combined with an

NVIDIA

®

discrete GPU. Hybrid SLI

TM

technology today includes two primary features:

GeForce

®

Boost and HybridPower

TM

. Hybrid SLI

TM

increases graphics performance

with GeForce

®

Boost and provides intelligent power management with HybridPower

TM

.

Currently, NVIDIA

®

Hybrid SLI

TM

Technology is only supported with Windows

®

Vista

TM

OS, and is not available with other OS. Please visit our website for the driver update

in the future.

GeForce

®

Boost

GeForce

®

Boost turbocharges the performance of NVIDIA

®

discrete GPU when

combined with NVIDIA

®

motherboard GPU. When GeForce

®

Boost is enabled, the

motherboard GPU and the discrete GPU share the rendering load by rendering

different frames of an image. Installing NVIDIA

®

Hybrid SLI

TM

-enabled graphics card

into NVIDIA

®

Hybrid SLI

TM

-enabled motherboard allows you to enjoy additive

performance.

HybridPower

TM

HybridPower

TM

enables users to switch off the discrete GPU when the higher

processing power of the discrete GPU is not required and use the motherboard

GPU for non intensive graphics applications. Switching off the discrete GPU not

only lowers the total system power consumption for everyday computing tasks like

browsing the Web, word processing, or watching HD videos but also lowers total

system noise.

Minimum System Configuration for Hybrid SLIMinimum System Configuration for Hybrid SLI

Minimum System Configuration for Hybrid SLI

TMTM

TM

For best Hybrid SLI

TM

benefits, the following minimum system configuration is

recommended. Please refer to below table for the minimum system configuration

for GeForce

®

Boost mode and HybridPower

TM

mode.

GeForce

®

Boost

CPU AMD Phenom CPU

Memory Dual Channel DDR2 800, 1024MB x 2

256MB or 512MB shared memory for motherboard GPU

Suggested OS Windows

®

Vista

TM

or Windows

®

Vista

TM

64

HybridPower

TM

CPU AMD Athlon X2 3800+ CPU

Memory Dual Channel DDR2 667, 1024MB x 2

256MB or 512MB shared memory for motherboard GPU

Suggested OS Windows

®

Vista

TM

or Windows

®

Vista

TM

64

2020

20

ASRock K10N78-1394 / K10N78 Motherboard

EnglishEnglish

English

Supported PCI Express Card for Hybrid SLISupported PCI Express Card for Hybrid SLI

Supported PCI Express Card for Hybrid SLI

TMTM

TM

GeForce

®

Boost and HybridPower

TM

features are supported only with certain set of

discrete GPUs. Please refer to our website for the graphics cards update in the

future.

Enjoy the benefit of NVIDIAEnjoy the benefit of NVIDIA

Enjoy the benefit of NVIDIA

®®

®

Hybrid SLI Hybrid SLI

Hybrid SLI

TMTM

TM

To enjoy Hybrid SLI

TM

feature, please refer to below installation and setup

procedures according to the mode you plan to use.

A. GeForceA. GeForce

A. GeForce

®®

®

Boost Boost

Boost

Step 1. Install one compatible PCI Express graphics card to PCIE1 slot (green). For

the proper installation procedures, please refer to section “Expansion Slots”.

Step 2. Connect the monitor cable to the correspondent connector on the PCI

Express graphics card on PCIE1 slot.

Step 3. Boot your system. Press <F2> to enter BIOS setup. Enter “Advanced”

screen, and enter “Chipset Settings”. Then set the option “Hybrid SLI” to

[256MB] or [512MB].

For users using single monitor: If you connect the monitor to the

motherboard GPU, you can switch between GeForce

®

Boost mode (Boost

Performance) and HybridPower

TM

mode (Save Power). If you connect the

monitor to the card GPU, you can choose GeForce

®

Boost mode (Boost

Performance) only.

If you want to use onboard VGA output, after step 1 to 3, please follow

below steps:

A. Set up the BIOS option “Primary Graphics Display” to [Onboard], and

save your BIOS change and exit BIOS setup.

B. Power off your system.

C. Switch your monitor cable to the connector on the I/O shield.

After reboot your system, you are allowed to switch between GeForce

®

Boost mode (Boost Performance) and HybridPower

TM

mode (Save Power)

according to your request.

For GeForce

®

Boost

Vendor Chipset Model Driver

NVIDIA GeForce 8400GS Gigabyte GV-NX84G256H 174.83

GeForce 8400GS Foxconn FV-N84SM2DT 174.83

GeForce 8400GS Leadtek WinFast PX8400 GS TDH 174.83

GeForce 8500GT Gigabyte GV-NX85T256H 174.83

For HybridPower

TM

Vendor Chipset Model Driver

NVIDIA GeForce 9800GX2 ASUS PCIE-ASUS-9800GX2/512M 174.83

La pagina sta caricando ...

ASROCK K10N78 Manuale del proprietario

Questo manuale è adatto anche per

ASROCK K10N78 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti