User Manual - hAP ax³

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be

familiar with standard practices for preventing accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully

before beginning installation. Failure to use the correct hardware or to follow the correct procedures

could result in a hazardous situation for people and damage to the system.

Please use this product with care and operate at your own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging

the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal

frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)

requirements. All Mikrotik radio devices must be professionally installed.

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and

European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik

device should be installed and operated no closer than 37 centimeters from your body, occupational

user, or the general public.

5. The configuration can be done through the wireless network using a web browser or mobile app.

Alternatively, you can use a WinBox configuration tool https://mt.lv/winbox;

6. Open https://192.168.88.1 in your web browser to start configuration, user name: admin and there is no

password by default (or, for some models, check user and wireless passwords on the sticker);

7. Click the (Check for updates) button and update your RouterOS software to the latest version;

8. Choose your country, to apply country regulation settings;

9. Set up your wireless network password;

10.Set up your router password;

*This device requires a WifiWave2 package for wireless interfaces to work.

To reach the password pull out the card place-holder near product information.

Configuration

We recommend clicking the "Check for updates" button and updating your RouterOS software to the

latest version to ensure the best performance and stability. RouterOS includes many configuration

options in addition to what is described in this document. We suggest starting here to get yourself

accustomed to the possibilities: https://mt.lv/help. In case an IP connection is not available, the Winbox

tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side

(all access is blocked from the internet port by default). For recovery purposes, it is possible to boot the

Buttons and jumpers

Netinstall servers (required for reinstalling RouterOS over the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button

is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Operating system support

The device supports RouterOS software with version 7.5 at or above which is indicated in the

RouterOS menu /system resource. Other operating systems have not been tested.

Accessories

Notice

TX power is limited to 20dBm (EIRP).

TX power is limited to 20dBm (EIRP).

This device needs to be upgraded to the latest version to ensure compliance with local authority

regulations! It is the end users responsibility to follow local country regulations, including operation

within legal frequency channels, output power, cabling requirements, and Dynamic Frequency

Selection (DFS) requirements.

All MikroTik radio devices must be professionally installed.

To avoid pollution of the environment, please separate the device from household waste and dispose of

it in a safe manner, such as at designated waste disposal sites. Familiarize yourself with the procedures

for the proper transportation of the equipment to the designated disposal sites in your area.

Federal Communication Commission Interference Statement

accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

APPROVED 5 GHz ANTENNA:

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC radiation

exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed

and operated no closer than 37 centimeters from your body, occupational user, or the general public.

Innovation, Science and Economic Development Canada

C53UiG+5HPaxD2HPaxD-

US

7442A-

C53AX

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science,

and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following

APPROVED 5 GHz ANTENNA:

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the IC radiation

exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed

and operated no closer than 37 centimeters from your body, occupational user, or the general public.

UKCA marking

CE Declaration of Conformity

C53UiG+5HPaxD2HPaxD е в съответствие с Директива 2014/53/ЕС. Цялостният текст на

ЕС декларацията за съответствие може да се намери на следния интернет

déclaration UE de conformité est disponible à l'adresse internet

jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod