Maxima 09240125 Manuale del proprietario

Tipo
Manuale del proprietario

Questo manuale è adatto anche per

USER MANUAL
READ THIS MANUAL CAREFULLY BEFORE USING
LESEN SIE DIESE ANLEITUNG VOR DEM GEBRAUCH SORGFÄLTIG DURCH
LEA ATENTAMENTE ESTE MANUAL ANTES DE UTILIZARLO
LIRE CE MANUEL AVEC ATTENTION AVANT DE L’UTILISATION
LEGGERE ATTENTAMENTE QUESTO MANUALE PRIMA DELL’USO
LEES DEZE HANDLEIDING AANDACHTIG DOOR VOOR GEBRUIK
LEIA CUIDADOSAMENTE ESTE MANUAL ANTES DE O UTILIZAR
0 924 012 0
0 924 012 5
RACK CONVEYOR
DISHWASHER
MODEL:
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 1 of 28
UK
INDEX
CAP 1 RISKS AND IMPORTANT WARNINGS ...................................................................... 3
CAP 2
FOREWORD ............................................................................................................... 6
CAP 3 HANDLING AND TRANSPORTING THE MACHINE .................................................. 6
TRANSPORTATION AND PACKAGING .................................................................................... 6
HANDLING ......................................................................................................................... 7
STORAGE ......................................................................................................................... 7
DIMENSIONS ..................................................................................................................... 7
CAP 4 INSTALLATION .......................................................................................................... 7
HAZARD ZONES ................................................................................................................. 7
IMPORTANT WARNINGS ...................................................................................................... 9
ACOUSTIC PRESSURE LEVEL .............................................................................................. 9
UNPACKAGING AND POSITIONING ........................................................................................ 9
ENVIRONMENTAL CONDITIONS .......................................................................................... 10
CAP 5 INSTALLATION ........................................................................................................ 10
ELECTRICAL CONNECTION ................................................................................................ 10
CONNECTION TO WATER SUPPLY ...................................................................................... 11
CONNECTION TO THE DRAIN NETWORK ............................................................................. 12
5.3.1 Wash tank connection ............................................................................................... 12
5.3.2 Connection of drying drain and inlet module (optional) .............................................. 12
CONNECTION OF STEAM HOSES (OPTIONAL) ...................................................................... 13
CONNECTING THE LIMIT SWITCH ....................................................................................... 13
INSTALLATION OF DISPENSERS ......................................................................................... 14
COMMISSIONING ......................................................................................................... 14
5.8.1 First boiler filling ......................................................................................................... 14
5.8.2 Machine equipped with single boiler .......................................................................... 14
5.8.3 Machine equipped with double boiler ......................................................................... 15
CONTROLS ..................................................................................................................... 15
CAP 6 MACHINE DESCRIPTION ......................................................................................... 17
MACHINE DIAGRAM .......................................................................................................... 17
DANGEROUS POINTS ....................................................................................................... 19
SAFETY DEVICES ............................................................................................................. 19
USE ACCORDING TO THE REGULATIONS ............................................................................ 19
CAP 7 MACHINE USE ......................................................................................................... 20
COMMAND DESCRIPTION .................................................................................................. 20
MACHINE START .............................................................................................................. 20
HEATING ......................................................................................................................... 20
WASHING ........................................................................................................................ 20
WASHING PROGRAMME .................................................................................................... 20
STOP DEVICE .................................................................................................................. 21
TEMPERATURE AND WORKING HOURS DISPLAY .................................................................. 21
LIMIT SWITCH DEVICE....................................................................................................... 21
REGULATIONS ................................................................................................................. 21
7.9.1 temperatures ............................................................................................................. 21
7.9.2 dispensers ................................................................................................................. 22
USER MESSAGES............................................................................................................. 23
SELF-DIAGNOSIS ............................................................................................................. 23
END OF WASHING OPERATIONS ........................................................................................ 24
POSITIONING THE DISHES................................................................................................. 25
CAP 8 MAINTENANCE ........................................................................................................ 26
GENERAL RULES ............................................................................................................. 26
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 2 of 28 MDIISY31D-(r06)
UK
PERIODICAL MAINTENANCE .............................................................................................. 27
CAP 9 DISPOSAL ................................................................................................................ 28
CAP 10 ENVIRONMENT ........................................................................................................ 28
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 3 of 28
UK
Read the instruction manual carefully before starting the machine.
It contains important information regarding safe installation, use
and maintenance. Failure to observe the instructions in the
enclosed documentation may compromise appliance safety and
immediately voids the warranty.
Cap 1 RISKS AND IMPORTANT WARNINGS
This appliance is intended solely for the use for which it was designed. Any
other use is deemed improper and therefore hazardous.
The specialised personnel responsible for installing the appliance must
adequately instruct the user on its operation and any relevant
safety
measures, also providing practical demonstrations.
Keep the machine in perfect working order and always use the various
protection devices it is fitted with
; ensuring regular maintenance is carried out
by professionally qualified personnel. In particular, make sure all the safety
devices are periodically inspected by them.
In case of a fault or malfunction, switch the appliance off, disconnect the
power supp
ly, shut off the water and do not attempt to carry out any repairs or
intervention directly; request the assistance of an authorised repair
technician.
Only the manufacturer or an authorised service centre with qualified
personnel may work on the machine,
even in case of malfunction, only using
original spare parts.
Failure to comply with the above may compromise the safety of the
appliance.
Always disconnect or isolate the machine from the power and water supplies
before servicing, repairs or cleaning, turning off the system switch.
NEVER
use water to extinguish fires on the electrical parts. Use a powder fire
extinguisher.
The machine must NOT be used by untrained persons.
The appliance CANNOT
be used by children and by persons with reduced
physical, se
nsory or mental capabilities, or lacking in experience and the
necessary expertise.
Children must NOT play with the appliance.
Cleaning and maintenance intended to be carried out by the user must NOT
be done by children.
The machine must NOT remain switched on when not in use.
Always turn the machine off at the wall switch when not in use.
Shut off the water supply whenever the machine is not in use.
In case of leaks of water or liquids, immediately switch the machine off and
shut off the water supply.
If a
n appliance of this type is no longer going to be used, make it inoperative
by removing the power cable, after having disconnected it from the mains.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 4 of 28 MDIISY31D-(r06)
UK
If the machine is not fitted with a plug or other means of complete
disconnection with separation of all t
he contacts, these disconnection devices
must be incorporated into the power mains, in compliance with the installation
rules.
If the power cable is damaged, it must be replaced by the manufacturer or an
authorised technical assistance service, or in any c
ase by a person with
similar qualifications, to prevent any risk.
The screw on the appliance marked with the IEC 60417 standard symbol
5021 is the equipotential connection.
NEVER
open the doors of the machine quickly during operation. Wait at
least 15 seconds after the motors have stopped.
When opening the doors, make sure they are properly attached to their
supports.
Check that the direction of rotation is as marked on the central moving part.
Otherwise contact qualified personnel to reverse the direction
of rotation of
the whole machine
Should the rack conveyor system stop due to the safety device, remove the
obstacle that caused the blockage before restoring operation.
To retrieve any
items that have fallen inside the machine, stop the machine and switch it off.
Do not remove the basket before it has completely exited the machine.
To avoid the risk of becoming entangled and dragged keep away
from
moving parts if wearing dangling jewellery or very large or wide-
sleeved
garments.
NEVER
use the machine without the protection devices arranged by the
manufacturer.
Make sure all items being washed are dishwasher safe.
NEVER
use the machine to wash objects of type, shape or material not
guaranteed as machine washable or not perfectly intact.
NEVER use the appliance or any of its parts as steps or a support for people,
property or animals.
Do not use the machine as support surface for any objects and/or tools.
NEVER overload the open door of front-loading machines; it is designed
to
only support the basket loaded with dishes.
NEVER
place bare hands in the washing solutions. If water containing
detergent accidentally comes into contact with eyes, rinse with plenty of clean
water and seek medical advice.
NEVER overturn the machine after it has been installed.
Do not install the dishwasher near heat sources over 50°C.
NEVER
leave the dishwasher exposed to the weather (rain, direct sunlight,
etc.)
The dishwasher must NOT be installed outdoors without adequate cover.
Do not obstruct the air inlet or outlet grilles.
Do not operate the machine without filters.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 5 of 28
UK
Never start a wash program without the overflow, if foreseen.
NEVER place magnetic objects near the machine.
Before connecting the appliance, make sure the details on the data plate
match those of the mains power and water.
Check that the electrical capacity of the system is adequate for the maximum
power absorbed by the appliance. If in doubt, contact a qualified person who
must check that the cross-section of the system cables is s
uitable for the
power absorbed by the appliance.
The incoming power supply cables (not provided) to the main switch must be
indicated with the appropriate danger warnings.
The appliance power supply cable must be H07RN-F type.
The installer technician must check the efficiency of the earth
” as required
by the applicable safety standards. This fundamental safety requirement must
be respected; if in doubt, request a thorough inspection of the entire system
by professionally qualified personnel.
At the end of testing, the installer technician must issue a written declaration
regarding correct installation and testing according to the applicable
regulations and highest standards.
DO NOT
modify the protection devices. Remove them only if the machine is
stopped and disconnected from the power supply; reinstate them before
reconnecting it to the power supply.
After disconnecting the power supply, only qualified personnel may access
the control panel.
DO NOT
change the position of or tamper with the machine’s parts, as this
could compromise its safety.
DO NOT
use dispensing devices or other devices not prescribed by the
manufacturer, which may alter the machine’s safety or operating
characteristics.
Noise pressure level according to EN ISO 4871
o LpA Max = 68.0db Kpa=2.5db for versions without drying
o LpA Max = 69.5db Kpa=2.5db for versions with drying
Max inlet water temperature: 65°C
Max inlet water pressure: 4bar (400kPa)
Appliance designed for permanent connection to the water supply
For cleaning operations, carefully follow the instructions provided in the
manufacturer’s handbook.
The appliance must NOT be cleaned with steam or water jets.
Only use anti-foaming detergents specific for dishw
ashers, in the doses
recommended by the manufacturer according to the water hardness and tank
capacity.
Never use acidic or corrosive products to clean the machine or to wash
dishes.
Never use products containing chlorides in concentrations above 50 ppm as a
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 6 of 28 MDIISY31D-(r06)
UK
dishwasher detergent or to clean the machine.
Never use steel wool pads, steel brushes or shavings to clean the stainless
steel.
In order to protect the environment, avoid the use of corrosive or pollutant
products and do not exceed the recommended doses.
Personnel in charge of handling the dishes must strictly follow the applicable
hygiene regulations after the wash.
Remember that the machine must NEVER
be operated without the special
protection curtains: at entry, exit, and intermediate positions.
Max unloading height
o On the ground in versions with overflow
o Maximum height 1 m in versions with drain pump
Normal operating conditions
Ambient temperature : 40°Cmax /4°Cmin (average 30°C)
Altitude : up to 2000 metres
Relative humidity : Max 30% at 40°C / max 90% at 20°C
Cap 2
FOREWORD
Warnings:
Carefully store all the documents near the appliance. Hand them to the technicians and workers in
charge of use and make sure they are kept well preserved over time, at a safe location, ideally with
copies for frequent consultation.
The operator must read,
understand and learn the present manual before carrying out any
operation on the device.
This piece of equipment is destined exclusively to the professional washing of tableware for large
numbers of people. Therefore, its use and maintenance are only to be carried out by well-trained
personnel, committed to following the manufacturer's instructions.
Warranty:
The manufacturer declines all responsibility and warranty for damages to things or persons derived from
failure to follow the instructions provided herein or from improper use of the machine.
Failure to follow the indications contained in the attached documents may compromise the safety of the
device and cause the warranty to be immediately annulled.
Installation and repairs carried out by unauthorised technicians, or the use of non-original spare parts,
will cause the warranty to be immediately annulled.
Cap 3 HANDLING AND TRANSPORTING THE MACHINE
Transportation and packaging
The machines can be transported in two manners:
- on lorries
- in containers
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 7 of 28
UK
Both situations require the same kind of packaging.
Handling
The machines must be handled with care, using a forklift truck or a hand
pallet truck.
The hoisting points are marked on the machine by adhesive labels.
During transportation, it is forbidden to remain near the machine, as it
may tilt and cause serious harm to persons nearby.
Accidents may involve impact, entanglement, and trapping by the
machine during handling and storage of the machine itself.
Storage
Storage methods for materials must include pallet, containers, conveyor belts, vehicles, lifting
equipment and devices suitable for the prevention of damages caused by vibration, impact, abrasion,
corrosion, temperature or any other condition that may occur. The parts stored must be periodically
inspected for deterioration.
Storage:
Transportation and deposit: between -10° C and 55° C, with peaks of up to 70° C (max 24 hours)
Dimensions
The machines of the rack conveyor line are available in various models, whose layouts are attached to
this document, including the dimensions of each machine.
Cap 4 INSTALLATION
Hazard zones
Definition of hazard zones and how (see fig. on next page) they are indicated, plus a general description
Risk of entanglement and dragging
- On the conveyor
Thermal hazard
- on the doors accessing the wash / rinse section
- on the drying chamber walls.
- on the boiler during machine installation and maintenance.
- Inside the machine for removal of the wash tank overflow.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 8 of 28 MDIISY31D-(r06)
UK
Electrical shock hazard
- electrical control panel
- electropumps
- fan
- electrical elements
Slippery floor hazard
- On floor wet from splashes and steam condensation
Shearing hazard
- on the fan of the extraction unit
- inside the machine on sheet metal sheet and sharp profiles
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 9 of 28
UK
Important warnings
Before carrying out any operations inside the wash chamber with the machine switched off which require
removal of the tank filters and/or the wash and rinse arms, wear protective gloves with a blade cut-
Acoustic pressure level
Unpackaging and positioning
When the machine is received, open the packaging and check the machine and its accessories for
damage occurred during transportation. If any damages are detected, immediately report to the
transportation company and do not proceed with installation: seek the assistance of qualified,
authorised personnel.
The manufacturer cannot be held responsible for any damage occurred during transportation.
Packaging elements (plastic bags, Styrofoam, strips of wood, nails etc) must be kept away from the
reach of children, as they are potentially hazardous.
Position the machine according to the indications supplied by the general
installation layout, supplied separately, making sure its position is correct
regarding maintenance needs.
Screw the feet to the supports and place the machine in its proper position.
Adjust the height of the feet to level the machine. As these machines are long,
use a spirit level.
Warning:
While positioning the machine, do not drag it on the floor, as this may damage its
structure.
The floor must be dimensioned taking into consideration the overall weight of the
machine. The floor must be levelled.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 10 of 28 MDIISY31D-(r06)
UK
Environmental conditions
Environmental temperature: 40° C max/4° C min (average: 30°C)
Altitude: up to 2,000 metres
Relative humidity: Max 30% at 40° C/max 90% at 20° C
Cap 5 INSTALLATION
Electrical connection
Warning! Installation must be carried out only by specialised
technicians!
Before connecting the equipment, make sure that both the
voltage and frequency of the mains power supply correspond to
those indicated on the data plate affixed to the side panel of the
machine.
To connect the machine to the mains power supply, use only
H07RN-F type power supply cables with a conductor cross-
section appropriate for the maximum absorption indicated on the
data plate and as indicated in the table below.
Take care when laying out the cable to observe the minimum
bend radius indicated by the cable manufacturer.
H07RN-F
Current (A)
Cross-section
(mm
2
)
Maximum length (mm)
40
10
5000
50
16
63
16
80
25
100
35
125
50
The machine must be connected to the power supply by means
of a type "C" dedicated automatic omnipolar switch in compliance
with safety regulations in force, or alternatively with a disconnect
switch having fuses with 3 mm minimum opening distance
between contacts. The above-mentioned switch, not supplied with
the machine, must wall-mounted at an easily accessible point, at
a height between 0.6 m and 1.70 m.
Before connecting the machine to the power supply, make sure
the power is switched off at the mains.
Remove the front panel and the cover of the electrical board by
removing the screws.
Feed the power cable through the cable gland on the back of the
machine.
Connect the cable to the terminals on the board, as indicated in
the wiring diagram attached.
If the Neutral and Earth cables are incorrectly connected, this can
result in irreversible damage to the machine, and the warranty
may be invalidated!
Check that the cables on the contactors, thermal protections etc.
are properly tightened, as the screws may have worked loose
during transportation.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 11 of 28
UK
Refit the front cover panel and the control panel using the screws
provided.
maintenance.
The appliance must also be co
symbol .
Do not use multi-sockets, adapters, cables of an inadequate cross-section or type or with
extensions not conforming to established electrical installation regulations.
Connection to water supply
Prepare the installation site according to the installation diagram attached.
Before connecting the appliance, make sure that there is a gate valve
installed between the mains water supply and the machine, allowing the
water supply to be shut off in case of need or when carrying out repairs.
In addition, make sure that the water supply flow rate is no lower than 20
l/min.
Warning!
Make sure that the temperature and pressure of the mains water
supply are within the range of pressure and temperature values
indicated on the technical data plate.
If they are not, it will not be possible to achieve suitable water flow
rates and temperatures for proper rinsing.
of a water softener upline of the machine's solenoid inlet valve.
If the water has a very high residual concentration of high conductivity minerals, we recommend
installation of a demineralisation system calibrated to achieve residual hardness as indicated in the
table below.
Characteristics Min Max
Hardness
French degrees
f
5
10
German degrees °dH
4
7.5
English degrees
°e
5
9.5
Mineral
residues
(TDS)
Parts per million
(20°C)
ppm
70
mg/l 70
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 12 of 28 MDIISY31D-(r06)
UK
Warning!
Machines intended for use with desalinated water or in any case with water having a high
concentration of sodium chloride, must be expressly ordered, as their construction requires the
use of specific materials.
Connection to the drain network
The machine is supplied complete with corrugated drain hoses and connectors for each tank to be used
in the event that the drainage water is to be channelled into a single drain outlet equipped with a syphon
as described in the following paragraph.
These drain hoses are not recommended for use in the event of direct drainage into a sump.
5.3.1 Wash tank connection
Rack conveyor dishwashers operate continuously, which means
they require particularly efficient and functional drainage systems.
For the position of drains on each tank and the exact dimensions,
refer to the installation diagram enclosed with each machine.
Connect the machine's drains to the mains drainage using hoses
designed to withstand a continuous temperature of 70°C, using the
connectors supplied if necessary.
The drainage system must always include a siphon, even in the
case of direct drainage into a sump as illustrated in the figure
In the case of multiple wash tanks, they may all be connected to a
single siphon
The height from the ground of the siphon “H” must not exceed the
height B of the drain pipe as illustrated in the figure.
5.3.2 Connection of drying drain and inlet module (optional)
When present, the drying drain (see photo) and inlet module must also be connected to the mains
drainage using the corrugated hose supplied with the machine
Warning!
In some versions the drying chamber drain is already connected to the wash tank.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 13 of 28
UK
Connection of steam hoses (optional)
The machine vents steam during operation and it is therefore advisable to install a
hood above it (1500-3000 m3/h)
Alternatively, on request the machine can be supplied ready-
system.
In the latter case, steam can also be channelled directly outside the installation space b
consisting of suitable stainless steel ducting with a diameter of 250 mm.
Warning!
hose.
with copper pipes. In this case, request the version with batteries with stainless steel pipes.
The machine MUST be fitted with a limit switch before use.
The limit switch must be installed on the outfeed table.
The switch must be mechanically fixed to the machine in such a
way as to guarantee its operation
We recommend using a limit switch of the type with lever
activation with washer or spring, to increase the contact surface
and reduce the effect of mechanical contrast.
Checks must be carried out to verify proper functioning of the limit
switch with all the baskets in use on site.
It must have a protection level of at least IP55
The limit switch must be in positive mode (contact normally
closed)
It must have a minimum rated capacity of 240V 1.5A
Recommended mechanical duration 10,000 K cycles.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 14 of 28 MDIISY31D-(r06)
UK
Installation of dispensers
The machine is equipped with specific outputs for rinse aid and detergent dosing devices. Connect the
dosing devices as shown in the wiring diagram to ensure the correct operation of the machine.
The rinse aid and detergent must be dosed by the automatic dispensers.
The amount of both of these products is established by the installation technician based on local water
hardness, and the technician also calibrates the dispensers themselves.
For the initial filling of the dosing circuit and the relative settings, see the "Settings” paragraph.
The level of liquids in the containers must never be allowed to reach empty.
The dispensers must never be filled with corrosive or contaminated products.
Chlorine-based products must not be used under any circumstances, as they cause the formation of
chloride, which in concentrations above 50 ppm can lead to corrosion
It is not advisable to dispense the products manually.
For any other installation, refer to the wiring and installation diagrams enclosed
The machine cannot be fitted with multi-voltage dosing devices and/or dosing devices with
absorption higher than 5A per output.
If you wish to use this type of dosing device, it must be connected to an external 16A relay
WARNING!
The use of detergents containing chlorides in a concentration exceeding 50 ppm can lead to
corrosion of the machine's stainless steel structure.
Installation of protection curtains
The machine is equipped with protection curtains to separate the various sections of the machine.
For the assembly diagram, see figure 12.
COMMISSIONING
5.8.1 First boiler filling
The boiler is empty at the time of initial machine installation, so the electrical elements are disconnected
in order to prevent idle operation which could result in damage.
To activate the elements, follow the first boiler charging procedure as described below.
5.8.2 Machine equipped with single boiler
Reference: Figures 2 and 6
Open the gate valve of the water supply system (Fig. 2/A)
Supply the machine with power by switching on the main switch (Fig. 2/B)
The display will show 4 horizontal bars (Fig. 2/C)
Press the line button (1) to switch the machine on. (Fig. 2/D)
The display will show the alternating message “FI?” “no” (Fig. 6/A)
Press button (3) to select “yES” (Fig. 6/A)
To confirm, press button (2). (Fig. 6/C)
The machine will automatically start loading the boiler, and the display will show the message “FI
(Fig. 6/D)
When the display shows the alternating messages “LoAd” “End”, it means the loading phase is
concluded, and the machine is ready to be switched on. (Fig. 6/E)
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 15 of 28
UK
5.8.3 Machine equipped with double boiler
Reference figure 12
For versions equipped with a second boiler, after following the instructions given in the paragraph above,
proceed as follows to activate the heating of the elements.
Disconnect the power supply using the main switch (fig.12/A)
Remove the panel under the rinse section (fig.12/B) to access the electrical control panel
Remove the cover of the control panel and access the terminal board (fig.12/C)
Activate the electrical element by connecting the two terminals indicated in figure 12/D with the wire
supplied
Refit the electrical control panel cover and the panel.
Controls
Make sure that the level of water in the washing tank, once filled, is 1-2 cm below the overflow
level.
Make sure that the temperature of the washing and rinsing tank is in accordance with the
settings.
Check the dispensers for proper function.
Make sure the rinsing economiser is working well: it must start dispensing hot water as soon as
a basket arrives beneath the rinsing jets, and make the hot water flow stop when the basket
moves away.
Make sure the limit switch is working. The switch must block the functioning of the advancement
motor and of the pump whenever a basket reaches the end of the plane. Once the basket is
removed, the functioning must resume.
Check the rotation direction of the pumps. If they are turning in the opposite direction, invert the
two phases of the power supply cable.
Check the regulation of the mechanical safety system of the conveyor,
which must be adjusted taking into account the overall length of the
machine and of the output tables measured by themselves.
A full load of baskets full of plates should not block the advancement
of the conveyor.
To make the regulation, turn the screw on the bracket that supports
the conveying motion unit.
The advised L length must range from 60 to 75 mm (see figure).
Please contact your assistance centre for complex applications.
Make sure that the rotation direction corresponds to the figure and to
the central motion of the conveyor.
WARNING: The mechanical safety will not work efficiently if the
rotation direction is incorrect.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 16 of 28 MDIISY31D-(r06)
UK
Only for versions equipped with pressure regulator with manometer, check the manometer during
rinsing. If necessary, adjust the pressure regulator and set the value as indicated in the table:
Version
Litres/hour
Baskets/hour
bar
No pre-wash
160
0.6
With pre-wash
270
0.7
Failure to carry out these checks will automatically annul the warranty.
END OF INSTALLATION
The installation technician must inform the manufacturer in case of functioning and/or safety
anomalies observed during the initial testing.
The machine can only be used once installation is complete.
The technician must issue a declaration of work carried out according to the rules of the trade and
to the laws in force.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31D-(r06) Page 17 of 28
UK
Cap 6 MACHINE DESCRIPTION
Machine diagram
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
DISHWASHER INSTRUCTIONS MANUAL
Page 18 of 28 MDIISY31D-(r06)
UK
1 Pre-wash chamber 5 Final rinse chamber 9 Wash tank
2 Wash chamber 6 Drying chamber 10 Rinse tank
3 Pre-rinse chamber 7 Steam extraction and recovery zone 11 Boiler
4 First rinse chamber 8 Pre-wash tank 12 Second boiler
13 Entry hood
Conveying belt washing machines are manufactured with high-quality materials: AISI 304 stainless steel
for the washing tanks and stainless steel for the remaining parts.
In pre-wash section 1, the dishes are given an initial brief clean to remove larger food particles.
In wash section 2, the dishes are actually washed.
In sections 3, 4, 5 the dishes are rinsed.
In section 6, the dishes are dried.
In section 7, steam is extracted or heat is recovered.
The baskets are automatically conveyed through the sections by means of a lateral conveyor.
MAXIMA - NIJVERHEIDSWEG 23 A/D - 3641 RP MIJDRECHT
THE NETHERLANDS - +31 (0) 297 253 969
WWW.MAXIMA.COM - INFO@MAXIMA.COM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152

Maxima 09240125 Manuale del proprietario

Tipo
Manuale del proprietario
Questo manuale è adatto anche per