Hobart Smartronic SADL Installation And Operation Instructions Manual

11. Jul. 2019

Warewashing

Flight-type dishwashers

PROFI FTNi series

(Smartronic)

Installation and

Operation

Instructions

(Original instructions)

DSN: FTN-14-02

From SN: 86 77 20001

EN

Table of Contents

1 Notes on the documentation

4

1.1 Application 4

1.2 Layout of the documentation 4

1.3 Representation convention 4

2 Safety instructions and regulations

5

2.1 Safety instructions and warning notices 5

2.2 Basic safety instructions 6

2.3 Property damage 8

3 Product description

8

3.1 General view and elements 8

3.2 Intended purpose 9

3.3 Designation 10

3.4 Technical specifications 10

3.5 Operating temperatures 10

4 Controls

10

4.1 Main switch and button 10

4.2 Control panel 11

4.3 Operating states 11

4.4 Display of faults and information 13

5 Installation

13

5.1 Personnel qualification 13

5.2 Special safety instructions 13

5.3 Transporting to the installation location 14

5.4 Removing the packaging 14

5.5 Installing the machine 14

5.6 Assembly of modules 15

5.7 Attach electrical consumers 16

5.8 Tension conveyor belt 16

5.9 Connecting to the power supply 18

5.10 Connecting the water 18

5.11 Connecting the drain 19

5.12 Connect steam or hot water 19

5.13 Connecting the exhaust 20

6 Connect detergent and rinse aid

22

7 Commissioning

23

7.1 Personnel qualification 23

7.2 Special safety instructions 23

7.3 Preparing the machine 24

PROFI FTNi series (Smartronic)

Installation and Operation Instructions

2 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

7.4 Fill the booster 24

7.5 Carry out checks 25

7.6 Making the chemical settings 26

7.7 Setting the autotimer (option) 26

7.8 Adjusting the exhaust system 26

8 Operation

27

8.1 Personnel qualification 27

8.2 Special safety instructions 27

8.3 Notes for optimum washing result 27

8.4 Preparations for washing 28

8.5 Functions and operating modes 34

8.6 Pressing the EMERGENCY STOP button 35

8.7 Washing 36

8.8 Selecting the conveyor speed 36

8.9 Activating and deactivating additional options 37

8.10 Switch off conveyor 38

8.11 Switch off machine 39

8.12 Executing daily cleaning 39

8.13 Performing monthly cleaning 43

8.14 Six monthly cleaning 44

8.15 Displaying the temperatures 44

8.16 Indicate operating hours 45

9 Fault indications and problems

46

9.1 Special safety instructions 46

9.2 Fault indications 46

9.3 Remedying the problem 49

10 Maintenance

50

11 Disposal

55

12 Product disclaimer

55

13 Conformity

56

Installation and Operation Instructions

PROFI FTNi series (Smartronic)

HOBART 0000000220-001-EN / 11. Jul. 2019 3

EN

1 Notes on the documentation

1.1 Application

This document contains the most important information for the installation and commissioning of the machine by

qualified personnel, as well as the information required for day-to-day operation by the operator.

▶

Keep the operation manual and all referenced documents in a safe and accessible place.

▶

Store the operation manual in a suitable container protected from humidity and dirt deposits.

▶

If you sell the machine, pass on the installation and operation manual.

1.2 Layout of the documentation

Referenced documents are all instructions that describe the installation, operation, maintenance and repair of the

device, as well as additional instructions for all accessories used.

For the operator:

‒ Comic Card (brief instructions)

‒ Operation instructions

For the specialised tradesman or HOBART service:

‒ Installation instructions

‒ Floor plan

‒ Circuit diagram

‒ Service Manual

‒ Service Software Manual

‒ Trouble shooting list

‒ Maintenance schedule

‒ Spare Parts Catalogue

1.3 Representation convention

1.3.1 Symbols used

Symbol Meaning

Warning of hazardous electrical voltage

EX

Beware of explosion

Warning of risk of crushing

Beware of entanglement

Beware of hazardous substances

Beware of hand injuries

PROFI FTNi series (Smartronic)

Notes on the documentation

4 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

Symbol Meaning

Beware of slipping

Beware of hazard area

Useful additional information and tips

1.3.2 Representation in the text

Representation Meaning

NOTE Important information on machine operation, not a warning notice

► Step

Outcome/result

‒ Listing 1st level

• Listing 2nd level

2 Safety instructions and regulations

2.1 Safety instructions and warning notices

▶

During machine operation, observe the general safety instructions and warning notices that precede each

action.

2.1.1 Hazard levels

The hazard level is part of the safety instructions and is denoted by the signal word.

Potential consequences are differentiated by the choice of signal word.

DANGER

imminent danger:

results in serious physical injury or death

WARNING

potentially hazardous situation:

can cause serious physical injury or death

CAUTION

potentially hazardous situation:

can cause minor physical injury

NOTICE

potentially harmful situation:

can cause damage to the product or other objects

2.1.2 Layout of warning notices

Warning notices are depicted with warning symbols and signal word in the corresponding safety colours.

PROFI FTNi series (Smartronic)

Safety instructions and regulations

HOBART 0000000220-001-EN / 11. Jul. 2019 5

EN

Installation and Operation Instructions

CAUTION!

Nature and source of the hazard

Explanation on the nature and source of the hazard

▶

Measures for averting the hazard

▶

additional measures for averting the hazard, where applicable

2.2 Basic safety instructions

2.2.1 Product safety

The machine conforms to state-of-the-art technology and the recognised safety regulations. Nonetheless, hazards

may occur.

Operate the machine only in compliance with the operation manual.

All modifications and alterations to the product are reserved for persons authorised by HOBART.

2.2.2 Personnel qualification

▶

Observe the regulations on occupational health and safety. Wear personal protective equipment.

▶

Carefully read through the Installation and Operation Manual before use.

Activity User group Qualification/training

Installation Qualified personnel Hobart Service or an electrically qualified person trained by

Hobart or a competent person acc. to the German technical

regulations for occupational safety (TRBS 1203) trained by

Hobart

Trainees Only under professional supervision and examination

Commissioning Qualified personnel Hobart Service or an electrically qualified person trained by

Hobart or a competent person acc. to the German technical

regulations for occupational safety (TRBS 1203) trained by

Hobart

Trainees Only under professional supervision and examination

Work on electrical sys-

tem

Qualified personnel Hobart Service or an electrically qualified person trained by

Hobart or a competent person acc. to the German technical

regulations for occupational safety (TRBS 1203) trained by

Hobart

Work on refrigeration

systems

Qualified personnel Category 1 expert certified in accordance with:

- Ordinance (EU) No. 517/2014 Article 10

- Implementing regulation (EU) 2015/2067

- German Chemicals Climate Protection Ordinance §5

Operation Operating personnel

and persons over the

age of 14

Only under supervision and after instruction by the operator on

the basis of the operating instructions, instructions on dangers

Disabled persons The suitability must be assessed by the operator on an individ-

ual basis

Persons up to the age

of 13

Persons up to the age of 13 are not suited for machine opera-

tion

Maintenance, repair Qualified personnel Hobart Service or an electrically qualified person trained by

Hobart or a competent person acc. to the German technical

regulations for occupational safety (TRBS 1203) trained by

Hobart

PROFI FTNi series (Smartronic)

Safety instructions and regulations

6 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

Activity User group Qualification/training

Trainees Only under professional supervision and examination

2.2.3 Product-specific hazards

Avoid body parts being crushed or knocked:

▶

Observe the instructions on the packaging for storage, lifting or transporting.

▶

Transport is reserved for certified and trained personnel.

▶

Only certified qualified personnel are permitted to install the machine, assemble the modules, tension the con-

veyor belt and connect the exhaust pipework.

▶

Ensure that the operators wear tight-fitting clothing.

▶

Do not reach into the conveyor system during operation.

▶

Carefully remove the wash arms when cleaning the machine.

Risk of body parts being cut:

▶

Wear personal protective equipment when removing the packing bands, unpacking the modules and tensioning

the conveyor belt.

▶

Only certified, qualified personnel are permitted to connect the exhaust pipework and set the exhaust system.

▶

Wear protective gloves when cleaning the machine.

▶

Only certified personnel are permitted to clean the exhaust condenser.

Avoid risk of explosion:

▶

Do not install machine in a potentially-explosive location.

Avoid electric shock:

▶

Do not allow water to flow over live components.

‒ Make sure the machine is correctly stored (see frost damage section 2.3).

‒ Do not spray the outside of the machine with a water hose or high-pressure cleaner.

▶

Have the machine connected to the power supply by qualified personnel.

▶

Have the booster and the fill booster initially filled and the motors checked only by certified, qualified personnel

and in accordance with the operation instructions.

▶

Have wearing or faulty parts replaced only by certified, qualified personnel.

Avoid fire risk:

▶

Do not allow water to flow over live components.

‒ Make sure the machine is correctly stored (see frost damage section 2.3).

‒ Do not spray the outside of the machine with a water hose or high-pressure cleaner.

▶

Have the machine connected to the power supply only by qualified personnel.

▶

Have all modifications to the machine, repairs and maintenance carried out only by qualified personnel.

Avoid chemical burns, sensitisation of the skin, poisoning:

▶

Wear protective equipment (gloves, safety goggles, protective clothing) when handling chemicals.

▶

Use only suitable chemicals. Observe the manufacturer's data.

▶

Do not open the door during operation.

▶

Disconnect the machine from the mains prior to cleaning.

Avoid burns, scalds (to the hands):

▶

Wear protective gloves when connecting to the site steam pipework.

▶

Do not open the door during operation.

▶

Disconnect the machine from the mains prior to cleaning.

▶

For cleaning, wear protective equipment (gloves, protective clothing) when touching parts that have hot surfaces

(heating rods, heat exchangers).

PROFI FTNi series (Smartronic)

Safety instructions and regulations

HOBART 0000000220-001-EN / 11. Jul. 2019 7

EN

Installation and Operation Instructions

Avoid risk of falling:

▶

Do not stand on the machine roof when connecting the exhaust pipework.

Avoid slipping:

Moisture can build up on the machine floor.

▶

Provide a floor covering that is guaranteed to be non-slip in case of moisture.

Residues on the washware, hygiene regulations not maintained.

▶

Hygiene regulations must be maintained and/or demonstrated in accordance with the national provisions.

2.2.4 Additional hazards

Potential hazards caused by operating resources to be used can be found in the enclosed safety datasheets. Work-

places must be signed accordingly.

2.3 Property damage

Avoid frost damage:

Temperatures below 0°C lead to functional damage.

▶

Before storing below 0°C, empty residual water in hoses, tank and boiler.

▶

Prior to restart, store the machine at room temperature (min. 15°C) for 24h.

Avoid water damage:

▶

Do not operate the machine without supervision.

▶

Close on-site shut-off valves at the end of operation.

3 Product description

3.1 General view and elements

  

Example: Model SADL

3.1.1 Curtain arrangement

Illustration applies to left/right running direction. The curtain arrangement is reversed for right/left running direction.

PROFI FTNi series (Smartronic)

Product description

8 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

E-S-A

S-A

L-A

L AN-R

S AN-R

3.2 Intended purpose

The machine is an item of technical equipment intended solely for commercial dishwashing.

The machine is designed solely for cleaning crockery (porcelain, glass, ceramic, temperature-resistant plastics or

stainless steel or similar) from the food industry.

Not for washing:

PROFI FTNi series (Smartronic)

Product description

HOBART 0000000220-001-EN / 11. Jul. 2019 9

EN

Installation and Operation Instructions

‒ Containers that do not come into contact with foodstuffs, such as ashtrays, candlesticks, electric appliances etc.

‒ Animals or textiles

‒ Foodstuffs intended for further consumption

3.3 Designation

The rating plate is located on the control box and contains the following information: model, serial number, date of

manufacture, country of manufacture, voltage, connection rating, design-state number and CE mark.

3.4 Technical specifications

See separate floor plan.

Noise emission:

Workplace-related emission value:

Emission sound pressure level LpA = 73.6 dB (A)

Measurement uncertainty KpA = 2.5 dB

3.5 Operating temperatures

Prewash tank 45 - 55°C

Main wash tank min. 60°C

Pumped rinse 60 - 65°C

Fresh water rinse 80 - 85°C

4 Controls

4.1 Main switch and button

EMERGENCY STOP button

Machine is completely switched off, but not voltage free.

Must be unlocked for operation.

Main switch

For operation, must be set to position I, for repair and maintenance work to position 0.

CONVEYOR ON button at the entry section (option)

Switches on the machine conveyor.

Washing is started automatically.

CONVEYOR OFF button at the entry section (option)

Switches off the conveyor and wash functions.

HIGH-PRESSURE button at the loading section (option)

Turns on the high-pressure program (illuminates during high-pressure mode).

Press the button again to turn off.

PROFI FTNi series (Smartronic)

Controls

10 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

4.2 Control panel

6

58

1

2

4

3

7

ON/OFF button This button has several functions:

‒ 1. Machine ON/OFF

Pressing this button switches the machine on.

Pressing the button again (5 seconds) switches the machine off. Exhaust

fan and drying unit blower may run on. After switch off, the machine is not

voltage free! A dot lights up in the Rinse display.

‒ 2. Conveyor ON / speed selection

Furthermore, the button lights up in various colours to indicate the current

operating mode (see sections 4.3 and 4.4)

CONVEYOR OFF button Pressing this button switches the conveyor off.

DRAIN button Press for 1 second:

Only the prewash tank will be drained (stand-by

mode).

Press for 5 seconds:

The machine will be completely drained and then

switched off.

After switch off, the machine is not voltage free! A dot lights up in the Rinse

display.

MENU button Press for 1 second:

Query temperatures/operating hours counter.

Press for 3 seconds:

Activates operator menu (option), display illuminates.

Wash temperature display In (°C) decimal point illuminated = heating on

Rinse aid temperature display In (°C) decimal point illuminated = heating on

In the event of a machine malfunction, the temperature indicators display the

corresponding error code.

Conveyor speed indicator Indicates the selected conveyor speed.

slow

medium

fast

Operator menu display Illuminates when the operator menu is activated.

4.3 Operating states

In the operating panel display, the ON/OFF switch shows the current operating state through different colours.

PROFI FTNi series (Smartronic)

Controls

HOBART 0000000220-001-EN / 11. Jul. 2019 11

EN

Installation and Operation Instructions

Machine is off

The ON/OFF button is colourless.

Machine being prepared for operation

The ON/OFF button flashes green. The wash tank is being filled and the machine is heating

up.

Machine ready

‒ The ON/OFF button illuminates completely green.

‒ The machine is ready for the next rinse cycle.

Prewash is being refilled

The ON/OFF button flashes green/blue alternately. Prewash and rinse tank are being

drained and filled.

Rinse program starts

‒ The ON/OFF button illuminates completely blue.

Machine drained

The ON/OFF button flashes blue. The machine drains completely and switches off.

drying assist

‒ The ON/OFF button display a permanently revolving blue segment.

PROFI FTNi series (Smartronic)

Controls

12 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

4.4 Display of faults and information

Fault: Operation not possible

‒ The ON/OFF button illuminates permanently red.

‒ The fault is displayed.

‒ For potential faults, see section 9.2

Information: limited operation is possible

‒ The ON/OFF button illuminates green/red alternately.

‒ The message is displayed.

‒ 9.2For potential messages, see section

Information: limited operation is possible

‒ The ON/OFF button illuminates blue/red alternately.

‒ The message is displayed.

‒ For possible messages, see section 9.2

5 Installation

5.1 Personnel qualification

Installation must only be carried out by qualified personnel (see section 2.2.2).

5.2 Special safety instructions

WARNING!

Risk of electric shock, fire hazard

Water (frost damage, machine overflow) flowing over live components can cause injury from elec-

tric shock or fire.

▶

Do not allow water to flow under live components.

▶

Make sure the machine is correctly stored (see frost damage section 2.3).

▶

Make sure that the machine does not overflow when being filled.

WARNING!

EX

Risk of explosion

Installing the machine in a potentially explosive location can cause explosion and serious injury

from ejected parts.

▶

Do not install machine in a potentially-explosive location.

PROFI FTNi series (Smartronic)

Installation

HOBART 0000000220-001-EN / 11. Jul. 2019 13

EN

Installation and Operation Instructions

NOTICE!

Frost damage

Temperatures below 0°C during transport/storage cause function impairments.

▶

Prior to installation, store the machine at room temperature (min. 15°C) for 24h.

5.3 Transporting to the installation location

WARNING!

Risk of being crushed or knocked

When being lifted and transported, the machine can overturn or fall and cause serious injury.

▶

Observe the instructions on the packaging for storage, lifting or transporting.

▶

Have the machine transported only by certified and trained personnel.

▶

If possible in its packing and on the skid.

▶

If a forklift is used, put a wooden frame under the machine.

▶

Use suitable transport means (elevating truck, crane etc.).

▶

Push on rollers.

▶

Avoid damage to floors and doors.

▶

Avoid damage to the machine.

5.4 Removing the packaging

CAUTION!

Risk of being cut

Removing the packing bands can cause cut injuries. When unpacking the modules, the sharp

edges of the sheet parts can cause cut injuries.

▶

Wear personal protective equipment.

▶

Cut off packing bands.

▶

Remove outside carton.

▶

Remove skid.

▶

Remove packing materials and accessories from the machine.

▶

Inspect the machine for possible transport damage.

5.5 Installing the machine

CAUTION!

Risk of being crushed

Body parts can be crushed while the machine is being set down.

▶

Have the machine installed only by certified, qualified personnel.

▶

Wear protective gloves.

NOTE: If the machine is delivered in separate modules, align the largest machine part at the installation

location first (see also5.6).

PROFI FTNi series (Smartronic)

Installation

14 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

▶

Align the machine according to the installation plan.

▶

Observe wall clearances according to the installation plan.

▶

By turning the feet, set the height of the loading platform to 920 mm.

▶

Level out an unevenness in the floor.

▶

Distribute machine weight equally onto all feet.

5.6 Assembly of modules

WARNING!

Risk of being crushed or knocked

When assembling modules, raised machine parts can overturn or fall and cause serious injuries.

▶

Have the modules assembled only by certified, qualified personnel.

▶

Wear personal protective equipment.

CAUTION!

Risk of being cut

When assembling modules, sharp edges on sheet parts can cause cut injuries.

▶

Have the modules assembled only by certified, qualified personnel.

▶

Wear protective gloves.

▶

Remove covers.

Affixing sealing tape:

Remove any old seals.

▶

Affix sealing strip no. 168 834-14 all the way around one of the

two contact surfaces.

▶

Allow the strip ends to overlap in the corners.

Adding next modules:

▶

Level the height (see 5.5).

▶

Connect modules (use screws SK M6 x 12, washers, spring

rings and nuts supplied).

▶

Cut off protruding sealing tape with knife.

▶

Connect the drain pipes.

Connecting wash tanks:

▶

Install overflows. :

PROFI FTNi series (Smartronic)

Installation

HOBART 0000000220-001-EN / 11. Jul. 2019 15

EN

Installation and Operation Instructions

▶

Set sealing ring (A) on the overflow pipe (B).

B

A

C

E

D

▶

Put the overflow pipe (B) from the inside of the tank through the pre-punched hole and tighten it with the nut

(C).

▶

Push coupling (E) over pipe (D). Attach the pipe to the overflow (B) and connect with the overflow pipe of the

opposite wash tank.

Remove transport feet (if present):

▶

Unscrew transport feet and return to the HOBART branch.

5.7 Attach electrical consumers

NOTE: Follow the wiring diagram and the labels on wires and terminals.

▶

Unroll cable bundles and draw through the front cable channel.

▶

Screw the cables to the connection terminals of the consumers.

5.8 Tension conveyor belt

CAUTION!

Risk of being cut or crushed

Rotating parts can cause crushing or cut injuries as the conveyor belt is being tensioned.

▶

Have the conveyor belt tensioned only by certified, qualified personnel.

▶

Wear personal protective equipment.

▶

The belt must be tensioned by hand. Use of the belt drive is not permitted.

PROFI FTNi series (Smartronic)

Installation

16 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

▶

Remove chain between belt shaft and transport motor (end of

machine).

▶

Place rolled conveyor belt on the exit end of the machine.

▶

Draw it through the machine in the direction of the loading sec-

tion.

▶

Connect the two conveyor ends using the conveyor rod.

▶

Attach rollers to both ends of the conveyor rod and click it into

place.

The conveyor belt shown here does not necessarily correspond in all details to the conveyor belt delivered to

you, as different conveyor belts may be used depending on the specific application.

▶

Tension the conveyor at the loading section equally on both

sides and lock the tension screws (A) with nuts (B).

A

B

▶

Replace chain between conveyor shaft and transport motor.

PROFI FTNi series (Smartronic)

Installation

HOBART 0000000220-001-EN / 11. Jul. 2019 17

EN

Installation and Operation Instructions

5.9 Connecting to the power supply

WARNING!

Risk of electric shock

Failure to connect properly to the power supply can cause mortal danger from electric shock.

▶

Have the machine connected to the power supply only by qualified personnel.

NOTE: To guarantee the electrical safety of the machine, it must be connected to a protective earthing

equipment conductor installed as specified. In addition, the machine must be connected on site to the

equipotential bonding connection. The connecting screw ( ) provided for this purpose is located at the

rear of the control box next to the cable gland.

With frequency converter-controlled machines and the corresponding use of a residual current protective

device (FI/RCD), this must be rated as type B (sensitive to alternating/direct currents).

These fundamental safety requirements and the professional design of the on-site installation must be

verified by a qualified electrician.

Hobart does not accept any liability for damage caused by improper installation! Any applicable local

installation instructions must be observed!

The mains cable must be connected via a cut-out device (main switch or accessible plug device).

The power supply must be consistent with the data on the rating plate.

▶

Open the control box and take out the wiring diagram from the inside of the door.

▶

Fuses and cable cross section must be designed accordingly.

▶

Draw mains cable (H07-RN-F) through cable gland at the bottom of the control box rear panel.

▶

Connect wires to main terminals or to main switch (if built-in).

▶

Tighten all terminal screws in the control box.

▶

Tighten cable gland.

5.10 Connecting the water

NOTE: The machine must be operated with potable water. For water with an extremely high mineral con-

tent, an external demineralisation unit is recommended.

▶

Connect water supply and drain pipes according to installation plan.

Line strainer and air gap are fitted to the machine as standard.

Water hardness:

‒ Fresh water rinse: max. 3 °d = 0.5 mmol/l; 80 – 120 µs/cm

‒ Tank filling: max. 3°d = 0.5 mmol/l.; 150 – 400 µs/cm

Flow pressure:

‒ Fresh water rinse: 1.5 – 6 bar at 500 l/h

‒ Tank filling: 1.5 – 6 bar

‒ If the flow pressure is above 6 bar: provide pressure reducing valve.

Temperature:

‒ Fresh water rinse without the CLIMATE option: 50 – 60 °C;

‒ Fresh water rinse with CLIMATE or CLIMATE-PRO: 12 °C;

‒ Tank filling: 50 – 60 °C

▶

Connect machine connections DN 20 (3/4") to site water supply.

▶

Provide site shut-off valve.

PROFI FTNi series (Smartronic)

Installation

18 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

5.11 Connecting the drain

▶

Connect central drain DN 50 (HT pipe) to site wastewater system.

▶

Fit bottom drain of scullery with siphon.

5.12 Connect steam or hot water

NOTE: On site, make sure that the pressures and temperatures for the heating medium given in the instal-

lation plan cannot be exceeded.

CAUTION!

Burns, scalds

During connection, hot pipelines and fittings can cause burns. Steam can escape and cause scold-

ing.

▶

Before connecting, lock-off the site steam supply and secure to prevent "restart".

▶

Wear protective gloves.

5.12.1 Connecting pipelines

All connections are equipped on site with the necessary fittings.

▶

Connect supply and return lines according to connection diagram.

▶

Lay steam connections so that the hot pipelines cannot be touched directly.

▶

Lay steam connections so that no damage can be caused to other machine components.

5.12.2 Insulate pipelines

▶

Use heat-resistant and waterproof insulating materials.

▶

Use shock-proof cladding.

5.12.3 Adjustment of manual shut-off valve

The built-in manual shut-off valve is equipped with and adjustment device to limit the flow rate of the heating supply

medium. The correct adjustment is very important, particularly for higher pressures.

NOTICE!

Property damage

If the manual shut-off valve is not throttled enough, water hammer may occur when the solenoid

valve closes.

If the manual shut-off valve is throttled too much, the heat output will be too low.

▶

Have the adjustment made only by a HOBART-trained customer service engineer when com-

missioning or when the site system is modified.

PROFI FTNi series (Smartronic)

Installation

HOBART 0000000220-001-EN / 11. Jul. 2019 19

EN

Installation and Operation Instructions

Adjustment of manual shut-off valve:

@

Special wrench required

▶

Adjust the valve seat so that when the valve is fully opened, the set temperature of the booster is maintained in

continuous operation.

5.13 Connecting the exhaust

NOTE: Applies only for machines requiring an exhaust air connection. All measures must be agreed in

consultation with the responsible ventilation engineer. Observe the locally-applicable provisions (Germany

e.g. VDI 2052). The notes on the connection diagram must be observed.

CAUTION!

Risk of falling

Risk of falling when stood connecting the exhaust pipework to the machine roof. The machine roof

can deform or buckle.

▶

Do not stand on the machine roof.

CAUTION!

Risk of being cut or crushed

Rotating parts can cause crushing or cut injuries when connecting the exhaust pipework.

▶

Have exhaust pipework connected only by certified, qualified personnel.

5.13.1 Connect exhaust to the ventilation system

▶

To prevent corrosion damage, execute exhaust channel in plastic or CrNi.

▶

Leave a clearance (approx. 10 cm) between machine and on-site exhaust channel or connect special connec-

tion adapter (available as accessory).

10 cm

▶

Provide an exhaust fan in the exhaust system. The fan installed in the machine has no compression.

▶

The air volume to be evacuated from site has to be greater than the exhaust volume of the machine (see instal-

lation diagram).

▶

For outdoor pipework: Provide insulation and automatically self-closing anti-freeze shutter.

PROFI FTNi series (Smartronic)

Installation

20 0000000220-001-EN / 11. Jul. 2019 HOBART

EN

Installation and Operation Instructions

La pagina sta caricando ...

Hobart Smartronic SADL Installation And Operation Instructions Manual

Questo manuale è adatto anche per

Hobart Smartronic SADL Installation And Operation Instructions Manual

in altre lingue

Documenti correlati

Altri documenti