Comelit IPPTZ110IRA Istruzioni per l'uso

i

4" FULL-HD IP PTZ CAMERA

ART. IPPTZ110IRA

Before installation, please read the operation manual carefully

i

Contents

1. Introduction ........................................................................................................................................ 1

Features ......................................................................................................................................... 1

2. Hardware Installation ......................................................................................................................... 2

System requirement ....................................................................................................................... 2

Installation environment .................................................................................................................. 2

Installation environment requirements ..................................................................................... 2

Recommend operating environment ........................................................................................ 2

Connection instruction .................................................................................................................... 3

3. Operating Guide for Network High Speed Dome ................................................................................ 4

Set the IE Browser .......................................................................................................................... 4

Download and Install ActiveX.......................................................................................................... 4

Login .............................................................................................................................................. 7

Live view ........................................................................................................................................ 7

System specification setting ......................................................................................................... 11

System .................................................................................................................................. 11

 Basic info ........................................................................................................................... 11

 User manage ..................................................................................................................... 17

 Serial ................................................................................................................................. 18

 Record ............................................................................................................................... 19

 Time zone .......................................................................................................................... 21

 Micro-SD status ................................................................................................................. 22

AV ......................................................................................................................................... 23

 Video channels .................................................................................................................. 23

 Video parameters............................................................................................................... 24

 Shot parameters ................................................................................................................ 25

Network ................................................................................................................................. 26

 Ethernet ............................................................................................................................. 26

 DDNS ................................................................................................................................ 27

 Netport ............................................................................................................................... 28

 Other protocol .................................................................................................................... 29

Alarm configuration ............................................................................................................... 30

 Linkage .............................................................................................................................. 32

 INPUT/OUTPUT alarm ...................................................................................................... 33

 Motion ................................................................................................................................ 34

Local ..................................................................................................................................... 35

 Local Settings .................................................................................................................... 35

Playback ....................................................................................................................................... 36

Search video and playback.................................................................................................... 36

4. Appendix .......................................................................................................................................... 37

Specification ................................................................................................................................. 37

Network Interface of Network High Speed Dome .......................................................................... 39

Default Network Parameters ......................................................................................................... 39

Frequently asked questions .......................................................................................................... 39

ii

CAUTION

 Non-technician should not try to operate this high speed dome before reading this manual carefully. (This

manual are subject to change without prior notice.)

 Cut the power supply off before operating the device to avoid damage caused by mal-operation.

 Interior of the camera are precision optical and electrical instruments. Heavy pressure, shock and other

incorrect operations should be prevented. Otherwise, may cause damage to product.

 Please do not use the product under circumstances where the limits exceed the maximum specified

temperature, humidity or power supply specifications.

 Contents in this manual may be different from the edition that you are using. Should any unsolved problem

occur given that the product is used according to this manual, please contact our technical support

department or your product suppliers.

 This manual content will be updated unscheduled, our company reserves the right to do manual contents

update without further notice.

 The default username for this device is “admin”, and the password is blank. Default IP address is

192.168.1.188, HTTP port is 80.

PACKING LIST

Open the package, and check whether the accessories all contained.

Part Quantity

IP speed dome（Include bracket） 1

Power supply 1

Screws bag 1

CD 1

Note:

 When open the box, please check all of parts carefully, confirm the parts as same as packing list.

 Please read the user manual carefully before the installation.

 Make sure to turn off all the power when install the camera

 Please confirm the power transformer, avoid the device damage with unmatched power source

Contact your local retailer without hesitate if anything is missing in your package.

1

1. Introduction

Features

 Build in 10X optics zoom lens, up to 1080P 1~30FPS

 True Day/Night switch

 H.264 High Profile/MJPEG encoding, VBR/CBR, dual stream

 Motion detection

 Alarm linkage output, micro-SD card video recording, snapshot, FTP upload, e-mail notification, link Preset

 ONVIF Profile S protocol,GB/T28181 protocol

 360° horizonal continuous rotation; vertical 0°-90°, 255 Presets

 Low power consumption – MTTF up to 30,000 hours

 1CH alarm input, 1CH alarm output, build in micro-SD card slot, audio input/output, 100M Ethernet

 IP66 protection level

2

2. Hardware Installation

System requirement

• LAN or WAN Internet to connect server, via PC Ethernet (network card or network cable) TCP/IP

protocol connect, suggest Internet Explorer 9.0 version or later.

• Monitor and PC configuration:

CPU: Dicaryon 2.8G or latter, RAM: 512M or later (above DirectX8.1)

• Monitor: 17", 1920×1080 resolution

• Operation system: Windows NT, Windows2000, Windows XP, Windows 7 or later

Installation environment

Installation environment requirements

Far away from high-temperature or humid environment, notice ventilation and avoid installing in shaky place.

Recommend operating environment

-20°C～55°C（The camera will enable cold start below -20°C, then it will turn on the IR leds automatically and

operate normally after heating in 30 minutes)

Hardware installation steps

Please make sure LAN and WAN are working smoothly before the Network High Speed Dome installation. After

checked all the network system in good condition, keep your hands clean and dry, following the steps below.

 Open the box to check the goods

 Take out all goods which needed for installation

• LAN connection

Use one network line to connect Speed Dome with concentrator or switchboard of the LAN. As Figure

below.

Users also can use one network line to connect IP Speed Dome with computer network card or

switchboard.

• WAN connection

Use one network line to connect IP Speed Dome with router or XDSL Modem/Cable Modem.

router

web browser

switch

web browser

IP camera

IP cam

era

IP camera

3

• Connect the power supply

After connect the power source, the IP speed camera will start operation automatically.

Connection instruction

Multi-function RJ45 line:

Analog video output

GND

Reset button

Power supply input，24 VDC

RJ45

Alarm input

Alarm output

4

3. Operating Guide

Set the IE Browser

Because the high safety level of the IE browser, if you visit Network High Speed Dome for first time, please set

the IE browser.

Setting method: open the IE browser, click Internet Option into the "Security" page, click the "Custom Level", and

then follow steps to set the IE browser

Download and Install ActiveX

Users have to install ActiveX Control when visit Network High Speed Dome at the first time via IE browser.

Download and install the ActiveX:

Input the IP address (default address

http://192.168.1.188.) in Internet Explorer to enter into login page (users

can refer to the “NETWORK SETTINGS” under “SETUP” menu to set the configure the IP address).

5

At the login interface, click “downloadActiveX”. As Figure 3-1:

Figure 0-1

Notice the below download interface, click “Run”. As Figure 3-2:

Figure 0-2

A “User Account Control” interface will pop out, click “Yes” to install. As figure 3-3.

Figure 3-3

In download interface, you can also select “save” to save ActiveX in default storage file, such as

D:\TDDOWNLOAD.Then open the file an install the ActiveX. As figure 3-4 and 3-5.

6

Figure 3-4

Figure 3-5

Click “Install” in the below interface, as Figure 3-6:

Figure 3-6

Click “Finish” in the below interface to complete the installation, as Figure 3-7:

7

Figure 3-7

Login

Re-open Internet Explorer after ActiveX installation completes, input IP address ( http://192.168.1.188,) of the

Network High Speed then turn to login page, input username (default is admin) and password (default is

blank), click login to enter into main interface(see Figure 3-8):

Figure 0-8

Live view

Live preview interface as figure 3-9:

8

Figure 0-9

In the Live view interface, users can do remote operations such as master/slave stream video preview, voice

intercom, listen, video recording, full-screen preview, video capture, PTZ control, preset, area scan, pattern scan,

PTZ watch, preview video image volume adjustment, camera module parameters setting, etc.

 Master/slave stream

：

notice the buttons at the left right corner, click it to switch

the preview mode.

 Video capture: click icon to do screen video capture, it will create JPG picture and store in the

specified folder automatically. The default file storage path is C:\IPCamera\ , users can set it at the

Setting→→Local→→Local setting .

 Full screen: click icon to get full screen preview, press ESC or right mouse click to exit full screen

preview.

 Manual video: click icon to do manual video operation and store in the specified file automatically

(Video format is mp4, the default file storage path is C:\IPCamera\, users can set it at the

Setting→→Local→→Local setting .

 Image parameters adjustment: users can adjust the image parameters at the video preview interface,

such as image brightness, hue, contrast, saturation and sharpness, etc. As Figure 3-10:

Figure 3-10

9

 Day/Night switch: according to the surveillance need, users can set color mode, black/white mode, auto

mode. According to the environment need, users can set Day/night switch sensitivity 0-255, and

Night/day switch sensitivity 0-255. As Figure 3-11:

Figure 3-11

 White balance: according to the environment color temperature, users can set the white balance, Auto

option for normal light environment, adjust the white balance value by drop down list selection

,

click

to save it. As Figure 3-9.

 Image flip: via the buttons to adjust image flip, support horizontal flip , horizontal+vertical flip .

As Figure 3-9.

 WDR: click to open it, click again to close it. As Figure 3-9.

 Low illumination: click to open it, click again to close it. As Figure 3-9.

 BLC: click to open it, click again to close it. As Figure 3-9.

 3DNR: click to open it, click again to close it. As Figure 3-9.

 Video formats

：

select the video format, 50HZ for PAL, 60HZ for NTSC. Click to save

it. As Figure 3-9.

 Exposure compensation: select the exposure compensation at the drop down list, click

to save it. As Figure 3-9.

 Exposure mode: select auto and handle at the drop down list, click to save it. As

Figure 3-9.

 Max shutter: select the max shutter value at the drop down list, click to save it. As

Figure 3-9.

 Min shutter: select the minimum shutter value at the drop down list, click to save it. As

Figure 3-9.

 Max gain: select the gain value at the drop down list, click

to save it. As Figure 3-9.

10

Click PTZ at the video preview interface to turn to PTZ configuration interface. As

Figure 3-12:

Figure 3-12

 PTZ control: user can do horizontal 360°/vertical 180°overall monitoring via PTZ configuration

buttons , PTZ operation speed 1-63 levels adjustable. As Figure 3-12.

 Preset: adjust the camera to the appointed angle and location through directional buttons and then

select a preset number in the preset drop down list, click to set it. There are 1-255 presets can be

set, and users can click to delete the preset, click to call the preset. As Figure 3-12.

 Area scan: via the PTZ buttons to set area scan, click to set left limit, click to set right limit

and area scan remembered automatically. When set the area scan, users have to select Small radian

scan (scan radian less then 180°) / Big radian scan (scan radian more then 180°) first and then set left

limit/right limit. Click to call area scan. As Figure 3-12.

 Pattern scan: at the pattern scan drop down list, users can select the pattern scan number, and edit the

pattern scan name. Then click to start recording, click to stop recording, pattern scan

remembered automatically. Click to call pattern scan. As Figure 3-12.

 PTZ Watch: at the PTZ Watch drop down list, users can select the PTZ watch type (Include preset, CRZ,

Pattern, Area, etc.) and set the idle time, then click to save it. As Figure 3-13.

11

Figure 3-13

 CRZ: at the CRZ drop down list, users can select cruise preset, click to add preset, set the delay

time. Select preset ID and click to delete it. Finally click to save it, and Click to call

pattern scan. As Figure 3-14.

Figure 3-14

System specification setting

System

 Basic info

System information

Click Setting→ System→ Basic info→ Sysinfo, IP Speed Dome “Device Info” interface. As figure 3-15:

12

Figure 0-15

 Device name: Edit the camera name

 Device number: Display the device serial number

 Hardware version: Display the device hardware version number

 UBOOT version: Display the product system UBOOT version number

 Kernel version: Display the product system kernel version number

 APP version: Display the product software version and the system version date

 PTZ version: Display the IP speed dome version model

 OCX version: Display the OCX version number

After setting complete, click to save it.

13

System operate

Click Setting→ System→ Basic info→ Sysoperate, IP Speed Dome “System operate” interface. As

figure 3-16:

Figure 3-16

 Rest: Restore factory settings

 Reboot: Click to do IP speed dome reboot operation

 Parameters type: Select the parameters type which you have to derive

 Parameter input: Select the configure file which you need and click

 Parameter output: Select the configure file which you need and click

After setting complete, click to save it.

14

Update

Click Setting→ System→ Basic info→ Update, IP Speed Dome “Update” interface. As figure 3-17:

Figure 3-17

 System update: System update online.

Operation method:

① Click , find the specified file and select the upgrade package, click

or double click to operate the program file . As Figure below:

② Click , system upgrade automatically;

15

③ After system upgrade successfully, the following window will pop out, click .

As Figure below:

④ Reopen the IE browser and input the IP address, after log in, check the whether the

software version is updated.

Note: after system upgrade successfully, you need to reset camera data in "Sysoperate", clear IE cache and

install ActiveX again before logging in web system (clear IE cache as figure below).

Non-professional technicians do not operate the system upgrade.

Please do not power off during installing update.

16

Log query

Log query setting, as Figure 3-18:

Figure 3-18

 Type: Select the alarm log type, there are alarm/ exception/ operation/ information selectable

 Begin time/ End time: Set the log search time period, click icon , and the log information will

display, click to open or download the corresponding log information

After setting complete, click to save it.

17

 User manage

User manage, as Figure 3-19:

Figure 3-19

 Add User: Add a new users, and select the new user limits of authority

 Modify: Select the added user and modify the users password

 Del User: Delete the added users

After setting, click to save it.

La pagina si sta caricando...

Comelit IPPTZ110IRA Istruzioni per l'uso

Comelit IPPTZ110IRA Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti