Panasonic CQR223WA Istruzioni per l'uso
- Categoria
- Lettore CD
- Tipo
- Istruzioni per l'uso
YFM284C413ZA
Matsushita Electric Industrial Co., Ltd.
Web site:http://www.panasonic.co.jp/global/
High-Power Cassette Player/Receiver with Changer Control
Ä‚ÚÓχ„ÌËÚÓ· Ë ÒıÂÏÓÈ ÛÔ‡‚ÎÂÌËfl CD-˜ẨÊÂÓÏ
Operating Instructions
àçëíêìäñàü èé ùäëèãìÄíÄñàà
MODE
CQ-R223WA
DOLBY B NR
DISP
TRACK
TUNE
REMOTE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RANDO M
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
CQ-R223WA
• Please read these instructions carefully before using this product and keep this manual for future reference.
•
•
è‰ ̇˜‡ÎÓÏ ˝ÍÒÔÎÛ‡Ú‡ˆËË ‡ÔÔ‡‡Ú‡ ÔÓÒËÏ ÔÓ˜ËÚ‡Ú¸ ̇ÒÚÓfl˘Û˛ ËÌÒÚÛÍˆË˛ ‚ÌËχÚÂθÌÓ Ë ı‡ÌËÚ¸  ̇ ÔÓθÁÓ‚‡ÌË ̇
·Û‰Û˘ÂÂ.Ç˚·Ë‡ÈÚ Ê·ÂÏ˚È ‚‡Ë‡ÌÚ.
CQ-R223WA
3
çÄ êìëëäéå üáõäÖ
E
N
G
L
I
S
H
àÌÙÓχˆËfl ‰Îfl ·ÂÁÓÔ‡ÒÌÓÒÚË
CQ-R223WA
2
Safety Information
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.
è‰ÛÔÂʉÂÌËÂ:
óÚÓ·˚ ËÁ·Â„‡Ú¸ ËÒ͇ ÔÓʇ‡ ËÎË
˝ÎÂÍÚÓ¯Ó͇, ӷ„ËÚ ‡ÔÔ‡‡Ú ÓÚ ‚ÎËflÌËfl
‰Óʉfl ËÎË ‚·„Ë.
óÚÓ·˚ ËÁ·Â„‡Ú¸ ËÒ͇ ÔÓʇ‡ ËÎË
˝ÎÂÍÚÓ¯Ó͇, ËÒÔÓθÁÛÈÚ ÚÓθÍÓ
ÍÓÏÔÓÌÂÌÚ˚, ‚ıÓ‰fl˘Ë ‚ ÍÓÏÔÎÂÍÚ.
ëÓ‰ÂʇÌËÂ
àÌÙÓχˆËfl ‰Îfl ·ÂÁÓÔ‡ÒÌÓÒÚË . . . . . . . . . . . . . . . . . 2
àÌÒÚÛÍÚË‚Ì˚ Û͇Á‡ÌËfl . . . . . . . . . . . . . . . . . . . . . . 11
ÄÍÒÂÒÒÛ‡˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
鷢ˠ҂‰ÂÌËfl . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
êÂrÛÔËӂ͇ Û‡ÒÓ‚ . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
ꇉËÓÔËÂÏÌËÍ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
ä‡ÒÒÂÚÌ˚Ë ÔÓË„˚‚‡ÚÂθ . . . . . . . . . . . . . . . . . . . . 52
ìÔ‡‚ÎÂÌË CD-˜ẨÊÂÓÏ. . . . . . . . . . . . . . . . . . . . 54
èÛÎ¸Ú ‰ËÒڇ̈ËÓÌÌÓ„Ó ÛÔ‡‚ÎÂÌËfl . . . . . . . . . . . . . 56
ìÒÚ‡Ìӂ͇ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
ëËÒÚÂχ Ô‰ÓÚ‚‡˘ÂÌËfl ͇ÊË . . . . . . . . . . . . . . . 60
ëıÂχ ˝ÎÂÍÚ˘ÂÒÍËı ÒÓ‰ËÌÂÌËÈ . . . . . . . . . . . . . . 61
èÓ‰Íβ˜ÂÌË „ÓÏÍÓ„Ó‚ÓËÚÂÎÂÈ . . . . . . . . . . . . . . 62
è·‚ÍËÈ Ô‰Óı‡ÌËÚÂθ . . . . . . . . . . . . . . . . . . . . . 62
íÂıÌ˘ÂÒÍÓ ӷÒÎÛÊË‚‡ÌË . . . . . . . . . . . . . . . . . . . 62
ÑÂÙÂÍÚӂ͇ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
íÂıÌ˘ÂÒÍË ı‡‡ÍÚÂËÒÚËÍË . . . . . . . . . . . . . . . . . . 65
ëÚ‡Ìˈ‡
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
. . . . . . . . . . . . . .
4
. . . . . . . . . . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
. . . . . . . . . . . . . . . . . . . . . . . . . 34
. . . . . . . . . . . . . . . . . . . . . . . 36
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cassette Tape Player . . . . . . . . . . . . . . . . . . . . . . 16
CD Changer Control . . . . . . . . . . . . . . . . . . . . . . 18
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Anti-Theft System . . . . . . . . . . . . . . . . . . . . . . . . 24
Electrical Connections . . . . . . . . . . . . . . . . . . . . . 25
Speaker Connections . . . . . . . . . . . . . . . . . . . . . . 26
Fuse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . 27
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Page
“ìÒÚ‡ÌÓ‚ÎÂÌÌ˚È
ÔÓËÁ‚Ó‰ËÚÂÎÂÏ ‚ ÔÓfl‰Í Ô.2
ÒÚ.5 θÌÓ„Ó á‡ÍÓ̇ êî
“é Á‡˘ËÚ ԇ‚ ÔÓÚ·ËÚÂÎÂÈ”
ÒÓÍ ÒÎÛÊ·˚ ‰Îfl ‰‡ÌÌÓ„Ó
ËÁ‰ÂÎËfl ‡‚ÂÌ 7 „Ó‰‡Ï Ò ‰‡Ú˚
ÔÓËÁ‚Ó‰ÒÚ‚‡ ÔË ÛÒÎÓ‚ËË, ˜ÚÓ
ËÁ‰ÂÎË ËÒÔÓθÁÛÂÚÒfl ‚
ÒÚÓ„ÓÏ ÒÓÓÚ‚ÂÚÒÚ‚ËÂ Ò
̇ÒÚÓfl˘ÂÈ ËÌÒÚÛ͈ËÂÈ ÔÓ
˝ÍÒÔÎÛ‡Ú‡ˆËË Ë ÔËÏÂÌËÏ˚ÏË
ÚÂıÌ˘ÂÒÍËÏË Òڇ̉‡Ú‡ÏË.”
CQ-R223WA
5
CQ-R223WA
4
12V
12V
24V
CQ-R223WA
7
CQ-R223WA
6
+ –
CQ -R223W A
DOLBY B NR
DISP
TRACK
TUNE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RANDOM
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
MODE
REMOTE
[BAND] [APM]
[VOL] [PUSH SEL]
[
]
[
u
]
[]
[MODE]
[PWR]
[MUTE] [LOUD]
[1 MTL] [{DISC]
[MONO]
[2 NR] [DISC
}
]
[5 B•S] [RAMDOM]
[3 TPS] [SCAN]
[4 REP] [REPEAT]
[1] [6]
[TUNE
] [
]
[TRACK
6 7
]
[DISP]
[REMOTE]
CQ-R223WA
8
E
N
G
L
I
S
H
CQ-R223WA
9
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will
bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering,
manufactured with carefully selected components and assembled by people who take pride in their work. Once you
discover the quality, reliability, and value we have built into this product, you too will be proud to be a member of
our family.
PWR
MODE
PRG
TUNE
TRACK
Car Audio
BAND/DISC UP
VOL
MUTE
(ATT)
[PWR] ( )
[MODE] ( ( ))
[BAND] [DISC UP]
( / /
)
[MUTE] ( )
[VOL] [
jj
][
ii
] ( )
[TUNE] [TRACK] [ ] [ ] []] [[]
(
/ / / /
)
Precautions
When Driving
Keep the volume level low enough product to be aware of road and traffic
conditions.
When Car Washing
Do not expose the product, including the speakers and tapes, to water or
excessive moisture. This could cause electrical shorts, fire, or other damage.
When Parked
Parking in direct sunlight can produce very high temperatures inside your car.
Give the interior a chance to cool down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate of a 12 volt DC, negative ground battery
system.
Protect the Tape Mechanism
Keep magnets, screwdrivers, or other metallic objects away from the tape
mechanism and tape head to prevent poor performance or malfunctions.
Note: The preset memory is cleared to return to the original factory setting when the
power connector or battery is disconnected.
Accessories
1. Operating Instructions.....................................................................................................1
2. Supplied Hardware................................................................................1 set (
➡ page 21)
3. Removable face plate case.............................................................................................1
Note: The optional remote control is available from your local dealer (YEFX9992013A) (➡ page 20)
CFor details consult your nearest Panasonic Service center.
CQ-R223WA
11
çÄ êìëëäéå üáõäÖ
CQ-R223WA
10
Panasonic
"Panasonic" ÔË‚ÂÚÒÚ‚ÛÂÚ Ç‡Ò Á‡ ‚ÒÚÛÔÎÂÌË ‚ ‚Ò ·ÓΠ‡ÒÚÛ˘Ë ÍÛ„Ë ÍÎËÂÌÚÛ˚  ÔÓ‰Û͈ËË.
å˚ ÒÚ‡‡ÂÏÒfl Ô‰ÓÒÚ‡‚ÎflÚ¸ Ç‡Ï ‚Ò ÔÂËÏÛ˘ÂÒÚ‚‡ ÔˆËÁËÓÌÌÓÈ ˝ÎÂÍÚÓÌÌÓÈ Ë ÏÂı‡Ì˘ÂÒÍÓÈ ÚÂıÌËÍË, ËÁ„ÓÚÓ‚ÎÂÌÌÓÈ
ÔË ‚ÌËχÚÂθÌÓÏ ÓÚ·Ó ÍÓÏÔÓÌÂÌÚÓ‚ Ë ÒÓ·‡ÌÌÓÈ ÔÂÒÓ̇ÎÓÏ, ÍÓÚÓ˚È Á‡ÒÎÛÊËÎ ıÓÓ¯Û˛ ÂÔÛÚ‡ˆË˛ ‚ ıӉ ‡·ÓÚ˚
‚ ̇¯ÂÈ ÍÓÏÔ‡ÌËË. å˚ Û‚ÂÂÌ˚, ˜ÚÓ ˝ÚÓÚ ‡ÔÔ‡‡Ú ‰ÓÒÚ‡‚ÎflÂÚ Ç‡Ï Û‰Ó‚ÓθÒÚ‚Ëfl Ë Ì‡Ò·ʉÂÌËfl ‰ÎËÚÂθÌÓ ‚ÂÏfl, Ë Ç˚
·Û‰ÂÚ ۷ÂʉÂÌ˚ ‚ ͇˜ÂÒÚ‚Â, ˆÂÌÌÓÒÚË Ë Ì‡‰ÂÊÌÓÒÚË, ÍÓÚÓ˚ Ï˚ ÔÓÎÓÊËÎË ‚ ÓÒÌÓ‚Û ‡ÔÔ‡‡Ú‡, Ë ˜ÚÓ Ç˚ ·Û‰ÂÚÂ
„Ó‰ËÚ¸Òfl ÔËÓ·ÂÚÂÌËÂÏ ˜ÎÂÌÒÚ‚‡ ‚ "ÒÂϸÂ" ̇¯ÂÈ ÍÓÏÔ‡ÌËË.
àÌÒÚÛÍÚË‚Ì˚Â
Û͇Á‡ÌËfl
ìÓ‚Â̸ „ÓÏÍÓÒÚË
ÑÎfl ·ÂÁÓÔ‡ÒÌÓÈ ÂÁ‰˚ ‰ÂÊËÚ „ÓÏÍÓÒÚ¸ ̇ ‰ÓÒÚ‡ÚÓ˜ÌÓ ÌËÁÍÓÏ ÛÓ‚ÌÂ, ˜ÚÓ·˚ ÌÂ
ÓÚ‚ÎÂ͇ڸÒfl ÓÚ ‰ÓÓÊÌÓ„Ó ‰‚ËÊÂÌËfl.
åÓÈ͇ ‡‚ÚÓÏÓ·ËÎfl
ÇÓ ËÁ·ÂʇÌË ÍÓÓÚÍÓ„Ó Á‡Ï˚͇ÌËfl, ÏÓ„Û˘Â„Ó ÔÓ‚ÎÂ͇ڸ Á‡ ÒÓ·ÓÈ ÔÓʇ ËÎË ‰Û„ËÂ
ÔÓ‚ÂʉÂÌËfl, ӷ„ËÚ ‡ÔÔ‡‡Ú (‚Íβ˜‡fl „ÓÏÍÓ„Ó‚ÓËÚÂÎË Ë ÎÂÌÚÛ) ÓÚ ÔÓÔ‡‰‡ÌËfl ‚Ó‰˚
ËÎË ˜ÂÁÏÂÌÓÈ ‚·„Ë.
ÇÂÌÚËÎflˆËfl ‡‚ÚÓÏÓ·ËÎfl
ÖÒÎË ÓÒÚ‡ÌÓ‚ËÚ¸ ‡‚ÚÓÏÓ·Ëθ ÌÂÒÍÓθÍÓ ˜‡ÒÓ‚ ̇ ÒÚÓflÌÍ ÔÓ‰ ‚ÎËflÌËÂÏ ÔflÏ˚ı
ÒÓÎ̘Ì˚ı ÎÛ˜ÂÈ, ÚÓ ÚÂÏÔ‡ÚÛ‡ ‚ Ò‡ÎÓÌ ÏÓÊÂÚ ÔÓ‰ÌËχڸÒfl ˜ÂÁÏÂÌÓ. ÑÓ ‚Íβ˜ÂÌËfl
‡ÔÔ‡‡Ú‡ ÂÍÓÏẨÛÂÚÒfl ‚Ó‰ËÚ¸ ‡‚ÚÓÏÓ·Ëθ Ë ‰‡‚‡Ú¸ Ò‡ÎÓÌÛ Óı·ʉ‡Ú¸Òfl ‚ ‰ÓÒÚ‡ÚÓ˜ÌÓÈ
ÒÚÂÔÂÌË.
èËÚ‡ÌËÂ
ùÚÓÚ ‡ÔÔ‡‡Ú ‡ÒÒ˜ËÚ‡Ì Ì‡ ‡‚ÚÓÏÓ·Ëθ Ò 12-‚ÓθÚÌÓÈ ·‡Ú‡ÂÈÌÓÈ ÒËÒÚÂÏÓÈ Ò
Á‡ÁÂÏÎÂÌÌ˚Ï ÓÚˈ‡ÚÂθÌ˚Ï ÔÓβÒÓÏ.
ãÂÌÚÓÔÓÚflÊÌ˚È ÏÂı‡ÌËÁÏ
ç ÔÓÎÓÊËÚ χ„ÌËÚ˚, ÓÚ‚ÂÚÍË ËÎË ‰Û„Ë ÏÂÚ‡Î΢ÂÒÍË Ô‰ÏÂÚ˚ ÔÓ·ÎËÁÓÒÚË
ÎÂÌÚÓÔÓÚflÊÌÓ„Ó ÏÂı‡ÌËÁχ ËÎË Ï‡„ÌËÚÌÓÈ „ÓÎÓ‚ÍË.
èËϘ‡ÌËÂ: èË ÓÚÍβ˜ÂÌËË ‡ÔÔ‡‡Ú‡ ÓÚ ÒÂÚË ÔËÚ‡ÌËfl ËÎË ·‡Ú‡ÂË Ô‡ÏflÚ¸
ÔÓθÁÓ‚‡ÚÂθÒÍËı ̇·ÓÓ‚ Ò·‡Ò˚‚‡ÂÚÒfl Ò ÛÒÚ‡ÌÓ‚ÍÓÈ Ì‡ ÓË„Ë̇θÌ˚ Á‡‚Ó‰ÒÍËÂ
Ô‡‡ÏÂÚ˚.
ÄÍÒÂÒÒÛ‡˚
1. àÌÒÚÛ͈Ëfl ÔÓ ÓÔ‡ˆËË ............................................................................................ 1
2. èÓÒÚ‡‚ÎflÂÏ˚ ÔË̇‰ÎÂÊÌÓÒÚË ............................................... 1 ÍÓÏÔÎ. (
➡
ÒÚ. 57)
3. îÛÚÎfl Ò˙ÂÏÌÓÈ Ô‰ÌÂÈ Ô‡ÌÂÎË............................................................................ 1
12V
1. ..........................................................................................................1
2.
......................................................................1
➡
39
3. ...........................................................................................1
YEFX9992013A
➡
38
Panasonic
èËϘ‡ÌËÂ: Ç˚ ÏÓÊÂÚ ÔËÓ·ÂÒÚË Ù‡ÍÛθڇÚË‚ÌÓ ‰ËÒڇ̈ËÓÌÌÓ ÛÔ‡‚ÎÂÌË ÓÚ ÏÂÒÚÌÓ„Ó ‰Ë·. (YEFX9992013A) (➡ÒÚ. 56)
CÔÓÒÚ‡‚ÎflÂÏÓÏÛ ÔÓ ÓÒÓ·ÓÏÛ Á‡Í‡ÁÛ. é ÔÓ‰Ó·ÌÓÒÚflı ÔÓÒËÏ Ó·‡ÚËÚ¸Òfl ‚ ·ÎËʇȯËÈ Ò‚ËÒÌ˚È ˆÂÌÚ "Panasonic".
MODE
CQ -R223W A
DOLBY B NR
DISP
TRACK
TUNE
REMOTE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RANDOM
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
MUTE
D
IS
P
PWR
E
N
G
L
I
S
H
2
Clock Setting
CQ-R223WA
13
E
N
G
L
I
S
H
1
CQ-R223WA
12
General
Power
Turn the key in the ignition until the accessory indicator lights.
Power on: Press [PWR].
Power off: Press [PWR] again.
ACC
ON
Volume level (0 to 40)
Volume
Turn the knob clockwise to increase volume,
and counterclockwise to decrease volume.
Mute
Press [MUTE] to mute the sound completely.
Press
[MUTE] again to cancel.
Loudness (LOUD)
Press and hold for more than 2 seconds [MUTE]
(LOUD) to enhance bass and treble tones at low or
medium volume.
Press and hold for more than 2 seconds
[MUTE]
(LOUD) again to cancel.
MODE
CQ -R223W A
DOLBY B NR
DISP
TRACK
TUNE
REMOTE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RAND OM
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
D
IS
P
TRACK
TUNE
Audio Mode
(Bass/Treble/Balance/Fader)
The 24-hour system is used for the clock.
q
Push [SEL] to select the audio mode.
Volume Bass Treble
BalanceFader
[] TUNE], [[ TUNE] (Hours, minutes)
w
Hours
w Press and hold [DISP] (clock) for more than 2
seconds.
Initial Time
q Press [DISP] (clock).
(Hours blink.)
e Press [] TUNE] or [[ TUNE].
(Hours set.)
Minutes
r Press [DISP] (clock).
(Minutes blink.)
t Press [] TUNE] or [[ TUNE].
(Minutes set.)
y Press [DISP] (clock).
Note: Press and hold [] TUNE] or [[ TUNE] to
change numbers rapidly.
Time Reset
Press and hold [DISP] (clock) for more than
2 seconds to activate the time setting mode to reset
the time.
Then, repeat steps
to .
(End.)
“AdJ” is displayed when the
clock is not adjusted.
Turn
[VOL] (volume) clockwise or counterclockwise to
change each level.
Bass:
Adjustable range: –12 to + 12 dB (by 3 dB step)
Treble:
Adjustable range: –12 to +12 dB (by 3 dB step)
Balance:
Adjustable range:
1 to 15 (by 1 dB step)
Balance center
(default)
R (right speaker) or L (left speaker)
Fader:
Adjustable range:
1 to 15 (by 1 dB step)
Fader center
(default)
F (front speaker) or R (rear speaker)
Up
Down
push
Note: If no operation takes place for more than 5 seconds in
audio mode (2 seconds in volume mode), the display returns
to the regular mode.
[DISP] (display)
Mute indicator
Loudness indicator
default: 0 dB
default: 0 dB
Remote control sensor (REMOTE) (➡ page 20)
Radio
CD Changer Control
(When a CD changer is connected)
Tape
(When a tape is inserted)
E
N
G
L
I
S
H
4
CQ-R223WA
15
E
N
G
L
I
S
H
3
Radio
CQ-R223WA
14
MODE
CQ -R223W A
DOLBY B NR
DISP
TRACK
TUNE
REMOTE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RANDOM
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
B
A
N
D
MONO
M
O
D
E
TRACK
TUNE
Radio mode
Press [MODE] to switch the operation mode as follows:
q
Band
Press [BAND] to change the band.
Manual Tuning
[[ TUNE]: Higher frequency.
[] TUNE]: Lower frequency.
Seek Tuning
Press and hold for more than 0.5 second ...
[[ TUNE]: Higher frequency.
[] TUNE]: Lower frequency.
Tuning will automatically stop when the signals
of the next broadcast station are received.
e
Mono Selection
Press [MONO] for monaural reception in case a lot of
interference is present in an FM stereo signal or to
improve the listening quality of weak FM broadcasts.
Press
[MONO] again to cancel.
r
FM stereo indicator
MODE
CQ -R223W A
DOLBY B NR
DISP
TRACK
TUNE
REMOTE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RAND OM
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
Preset buttons from [1] to [6]
Display Change
Press [DISP] (display) to switch to the clock display.
Preset Station Setting
Up to 6 stations can be saved in each of the FM1, FM2,
FM3 and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
Band
Press [BAND] to select a desired band.
(
➡page 14)
q
Auto Preset Memory (APM)
Press and hold [BAND] (APM: auto preset memory) for more
than 2 seconds.
• The 6 stations with good reception will be automatically
saved in the memory under preset buttons
[1]
-
[6]
.
• Once set, the preset stations are sequentially scanned for 5
seconds each.
Manual Preset Memory
Use manual or seek tuning to find a station. (➡page 14)
Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
w
Caution: To ensure safety, never attempt to preset stations
while you are driving.
Preset Station Calling
Press the corresponding preset button from [1]
to [6] to tune in a preset station.
Frequency
Clock display
MONO indicator
blinks once
B
A
N
D
1
MTL NR
25
B•S
63
TPS REP
4
D
IS
P
preset number
w
E
N
G
L
I
S
H
6
CQ-R223WA
17
E
N
G
L
I
S
H
5
Cassette Tape Player
CQ-R223WA
16
MODE
CQ -R223W A
DOLBY B NR
DISP
TRACK
TUNE
REMOTE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RAND OM
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
1
MTL NR
25
B•S
63
TPS REP
4
D
IS
P
TRACK
TUNE
Loading a Cassette
Insert the cassette with the exposed tape side facing to
the right. Gently push the cassette in until the loading
begins. The cassette will be loaded in place and playback
starts.
Ejecting the Tape
Press [u] and the cassette will eject for removal, and
the previous mode of operation will be resumed.
Notes:
• If power is switched off before [u] is pressed, the
cassette will not eject. Switch on again and press [
u]
to eject the cassette.
• The cassette tape should always be removed from the
cassette slot when not in use.
Play Side Change
Press [] to switch to the program on the other side
of the tape.
The display changes to indicate which program is
playing.
Rewind and Fast Forward
Press [6 TRACK] or [7 TRACK] to activate rewind
or fast forward of the tape.
Program Indicator
(This indication “” rotates.)
TE MONO
1
MTL NR
25
B•S
63
TPS REP
4
DISC SCAN REPEAT RANDOM
223W
DOLBY B NR
Exposed Tape end
Top Side Playing
Bottom Side Playing
Press
[] to stop rewind or fast forward.
If you rewind the tape fully, it will play on the same
program side again.
If you fast forward to the end, play will resume from the
beginning of the other side of the tape.
Metal Tape
Press [1] (MTL) when playing metal or
chromium dioxide (CrO
2) tapes.
Press
[1] (MTL) again to cancel.
Blank Skip
Press [5] (B•S) to skip unrecorded portions
longer than 15 seconds on the tape.
Press
[5] (B•S) again to cancel.
Note: When repeat is on, the blank skip does
not work because the repeat has priority over
the blank skip.
Dolby B Noise Reduction
Press [2] (NR) to set the Dolby B NR.
Press
[2] (NR) again to cancel.
Note: Set the Dolby B NR when playing back
a tape recorded with Dolby B Noise
Reduction.
Note: Playing normal tapes in the metal
tape mode causes high frequency
imbalance, which affects tone quality.
Repeat Play
Press [4] (REP) to repeat the current
program.
Press
[4] (REP) again to cancel.
Tape Program Search (TPS)
Operation
Press [3] (TPS) to activate the tape program search.
To select a desired program, press [7 TRACK] or [6
TRACK] corresponding times to go forward (up to 9) or
backward (up to 8).
To turn it off, press [3] (TPS) again.
(Rewind:)
80
c
(Fast forward:)
19
c
Note: The TPS and B•S may not work
correctly in the following cases. This,
however, does not mean that the unit is
defective.
• There is an interval less than 3 seconds (15
seconds in B•S) or having a high level of
noise or hum between programs.
•
There is particularly low-level passage
during the program.
Caution: Do not insert a tape when “tape”
indicator “
” or “” lights.
Note: To maintain your cassette player in top
condition, avoid using tapes that are longer than 90
minutes (C-90).
Notes on Cassette Tapes
Tape Slack:
Use a pencil or similar object to take up the slack as
shown. If a loose tape is used, this may result in the
tape becoming tangled in the rotating parts of the
unit.
Do not
touch or
pull out the
tape.
Pencil
Exposed tape
end (Open
end)
blinks
Display Change
Press [DISP] (display) to switch to the clock display.
Tape Clock display
E
N
G
L
I
S
H
8
CQ-R223WA
19
E
N
G
L
I
S
H
7
CD Changer Control
CQ-R223WA
18
CD Changer mode
While a disc magazine is inserted in the CD changer, press [MODE].
Play starts from the first track.
Disc Selection
[1] ({ DISC): Previous disc.
[2] (} DISC): Next disc.
Display change
Press [DISP] (display) to switch to the clock display.
MODE
CQ -R223W A
DOLBY B NR
DISP
TRACK
TUNE
REMOTE
L
O
U
D
MONO
MUTE
DISC SCAN REPEAT RANDOM
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
1
MTL NR
25
B¥S
63
TPS REP
4
1
MTL NR
2
D
IS
P
M
O
D
E
TRACK
TUNE
Track Selection
Press [TRACK 7] once to go to the next track, Press
repeatedly to step forward through all the tracks.
Press
[TRACK 6] once to play from the beginning of the
current track, Press twice to play the previous track. Press
repeatedly to step backward through all the tracks.
Track Search
Press and hold [TRACK 7] or [TRACK 6] for more than
0.5 second to activate fast forward or reverse through a
track. Release it to resume the normal CD play from that
position.
q
w
e
Disc is dirty, or is upside down.
➡ Select the next available compact disc. Check the disc.
Disc has scratches.
➡ Select the next available compact disc. Check the disc.
No operation by some cause.
➡ Eject the magazine. If failure persists, press the reset switch on the CD
changer. If normal operation is not restored yet, call the shop where
you purchased the unit or the nearest Panasonic Service center to ask
for repairs.
No disc in the changer (magazine)
➡ Insert discs into the changer (magazine).
Error Display Messages
Scan Play
Tracks
• Press [3] (SCAN). The track number blinks and
the first 10 seconds of each track on the discs
play in sequence.
• To stop scanning and continue with the current
track, press
[3] (SCAN) again.
Scan Play
Discs
• Press and hold [3] (SCAN) for more than 2
seconds. The first track of all the discs in the
magazine is played for 10 seconds each. Also,
Disc Number blinks at the same time.
• To stop the current play of the disc scanning,
press and hold
[3] (SCAN) for more than 2
seconds again.
Repeat Play
• Press [4] (REPEAT) to repeat the current
selection. “REP” indicator lights.
• The current selection continues to repeat until
you press
[4] (REPEAT) again.
Repeat Play
Disc
• Press and hold [4] (REPEAT) for more than 2
seconds to repeat the current Disc. “REP/DISC”
indicator lights.
• To cancel, press
[4] (REPEAT) for more than 2
seconds again.
Repeat indicator
lights
blinks
blinks
Notes:
¡CD changer functions are applicable to units with optional CD changer unit. (sold separately)
¡This unit can neither play MP3 and WMA nor display CD-TEXT even if the CD changer unit support them.
CD Changer
Clock display
Random Play
• Press [5] (RANDOM) to random selection of
music is played from all available CDs. “R
”
indicator lights.
• To cancel, press
[5] (RANDOM) again.
Random indicator
Random Play
Disc
• Press and hold [5] (RANDOM) for more than 2
seconds to random selection of music is played
from the current Disc. “R
/DISC” indicator lights.
• To cancel, press
[5] (RANDOM) for more than 2
seconds again.
lights
Playing Time
Disc Number
Track Number
lights when a CD
changer is connected.
DISC NO
DISC NO
E
N
G
L
I
S
H
10
CQ-R223WA
21
E
N
G
L
I
S
H
9
Remote Control
CQ-R223WA
20
M
O
D
E
DOLBY B NR
TRACK
TUNE
REMOTE
Battery Installation
Remove the battery holder.
Press and hook A of the battery holder and then pull it out.
Install the battery on the battery holder.
Set a new battery properly with its “+” side facing up as shown
in the figure.
Insert the battery holder.
Push the battery holder back into its original position.
Battery Notes
Remove and dispose of an old battery immediately.
Battery Information:
• Battery type: Panasonic lithium battery (CR2025) (included)
• Battery life: Approximately 6 months with normal use (at room temperature)
(Back side)
Battery holder
Lithium battery
(included)
Position A
Position B
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.
Battery leakage may damage the unit.
PWR
MODE
PRG
TUNE
TRACK
Car Audio
BAND/DISC UP
VOL
MUTE
(ATT)
[PWR] (power)
[MODE] (Mode (source))
(
➡page 14, 18)
• Do not disassemble or short the battery. Do not throw a battery into a fire.
• Keep batteries away from children to avoid the risk of accidents.
• Be careful to observe proper local disposal rules when you dispose of batteries.
Control Reference Guide
Buttons of the remote control function in the same way as the controls on the main unit of the reference page.
Point the remote control unit at the main unit’s sensor (REMOTE).
[MUTE] (Mute)
(
➡page 12)
[VOL] [}] [{] (Volume)
(Volume Up/down)
(
➡page 12)
[TUNE][TRACK] [a] [] []] [[]
(Tune/track, selection/search/Fast forward/Fast
reverse)
(
➡page 14, 18)
Installation
Installation Hardware
• Before installation, check the radio operation with
antenna and speakers.
• Disconnect the cable from the negative (–) battery
terminal (see caution below).
• Unit should be installed in a horizontal position with
the front end up at a convenient angle, but not more
than 30°.
Dashboard Installation
Installation Opening
The unit can be installed
in any dashboard having
an opening as shown at
right. The dashboard
should be 4.5 mm - 6 mm thick in order to be able to
support the unit.
Installation Precautions
This product should be installed by a professional
installer, if possible.
In case of difficulty, please consult your nearest
authorized Panasonic Service Center.
1. This system is to be used only in a 12-volt, DC
battery system (car) with negative ground.
2. Follow the electrical connections carefully (
a page
25). Failure to do so may result in damage to the
unit.
3. Connect the power lead (red) after all other
connections are made.
4. Be sure to connect the battery lead (yellow) to the
positive terminal (+) of the battery or fuse block
(BAT) terminal.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
7. Please carefully read the operating and installation
instructions of the respective equipment before
connecting it to this unit.
Preparation
30˚ or less
Caution: Do not disconnect the battery terminals of
a car with trip or navigational computer since all
user settings stored in memory will be lost.
Instead take extra care with installing the unit to
prevent shorts.
182 mm
53 mm
Fire Wall of Car
w Hex. Nut
e Rear Support Strap
t Mounting Bolt
q Mounting Collar
r Tapping Screw
(a) Using the Rear Support Strap
Rubber Cushion
(Option)
t Mounting Bolt
q Mounting Collar
Rear Support Bracket
(Provided on the car)
(b) Using the Rubber Cushion (option)
[BAND] [DISC UP]
(Band/Disc change/play
side change)
(
➡page 14, 18)
No. Item Diagram Q’ty
q
1
1
1
1
1
1
2
1
Mounting Collar
Hex. Nut (5 mmø)
Rear Support Strap
Tapping Screw
(5 mmø
× 16 mm)
Mounting Bolt (5 mmø)
Power Connector
Dismounting Plate
Trim Plate
w
e
r
t
y
u
i
1
2
3
4
Mounting spring (L)
E
N
G
L
I
S
H
12
CQ-R223WA
23
E
N
G
L
I
S
H
11
Installation (Continued)
CQ-R223WA
22
Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and
fingers.
Establish the rear of the unit.
After fixing Mounting Bolt t connection and
Power Connector
y, fix the rear of the unit to the
car body by either method (a) or (b) shown on the
previous page.
Insert Trim Plate i.
After installation reconnect the
negative (–) battery terminal.
First complete the electrical connections, and
then check them for correctness.(
a page 25)
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
The included Mounting Collar
q is designed specially for this
unit. Do not use it to attach any
other model.
y Power Connector
Engage Mounting
Springs (
C) in the both
sides of the mounting
holes of Mounting Collar
q firmly.
Mounting Spring
Mounting
Hole
Tab
q Mounting
Collar
Mounting Springs (R)
Mounting Holes
t Mounting Bolt
The tabs to be bent vary depending on the car.
To securely install the unit, fully bend a
number of the tabs so that there is no rattling.
Example:
To Remove the Unit
Switch off the power of the unit.
Remove the removable face plate.
Press []. (release button). The
removable face plate will be released.
1
Remove the Trim Plate i with a screwdriver.
2
Insert the Dismounting Plates u along the
grooves on both sides of the main unit
until “click” is heard.
Pull out the unit while pushing the plates
further inside.
3
Remove the unit pulling with both hands.
4
C
Q
-
R
2
2
3
W
D
O
L
B
Y
B
N
R
Push
Contact
i Trim Plate
Screwdriver
u Dismounting Plate
Insert
Pull out
MODE
NR
TUNE
REMOTE
Release button
Insert the tab
end in the
outer groove.
“Click”
E
N
G
L
I
S
H
14
Electrical Connections
CQ-R223WA
25
E
N
G
L
I
S
H
13
Anti-Theft System
CQ-R223WA
24
Cautions:
• This face plate is not waterproof. Do not expose it to water or excessive moisture.
• Do not remove the face plate while driving your car.
• Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
• Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical contacts.
• If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
Place the Removable Face Plate
into Case
Switch off the power of the unit.
Remove the removable face plate. (➡page 23)
Gently press the bottom of the case and open the
cover. Place the face plate into the case and take it with
you when you leave the car.
Removable face plate case
C
Q
-R
2
23
W
D
O
L
B
Y
B
N
R
Install Removable Face Plate
Slide the left side of the removable face plate in place.
Press the right end of the removable face plate until
“click” is heard.
Tab
Cutout
CQ-R223WA
LEFT SPEAKER
(FRONT )
RIGHT SPEAKER
(FRONT )
LEFT SPEAKER
(REAR )
RIGHT SPEAKER
(REAR )
(+)(–)(+)(–)
(+)(–)(–)
(+)
Antenna
Pre-Amp. Out Connector
CD Changer
Control Connector
Power
Connector
(Red)
(Yellow)
(Black)
(Blue w/White Stripe)
(Violet w/Black Stripe)
(Gray w/Black Stripe)
SPEAKER LEAD
(White w/Black
Stripe)
(White)
(Gray)
(Green w/Black
Stripe)
(Green)
(Violet)
Battery Lead
To the car battery, continuous
+12V DC
ACC Power Lead
To ACC power, +12V DC
Ground Lead
To a clean, bare metallic part of
the car chassis
Not Used
External Amplifier
Control Power Lead
To an external amplifier
Note: This lead is used for power
control when an external power
amplifier is connected. The power
supply of a power amplifier will be
activated when turning on the power of
this unit.
L(White)
R(Red)
CD•C-IN
(Rear)
Fuse(3A)
Extension Cord
Supplied for an optional CD changer
(DIN/BATT/RCA/GND)
Ground Lead
To a clean, bare metallic
part of your car
Battery Lead
RCA Cord
DIN Cord
(White)
(Red)
(R)
(L)
CD Changer
CX-DP88
(Option)
(Blue)
• If the fuse (rear panel) blows
frequently,there may by something
wrong with the unit, Consult the shop
where you purchased this unit.
To the car battery, continuous
+12V DC
BATTERY
Fuse (15 A)
BATTERY 15A
ACC
REAR SPFRONT SP
Preparation:
• This unit can be connected to an optional CD changer (CX-DP88). For details consult your nearest Panasonic Service
center.
• For connection to a CD changer, refer to the operating instructions of the CD Changer (CX-DP88).
❐Wiring Diagram
Cautions:
• This product is designed to operate with a 12 V DC, negative ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Strip about 5mm of the lead ends for connection (only non-ISO connector cords).
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
• Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased when
the battery terminals are disconnected.
E
N
G
L
I
S
H
16
CQ-R223WA
27
E
N
G
L
I
S
H
15
CQ-R223WA
26
Speaker Connections
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
L
R
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
L
R
L
R
L
R
<Right>
<Wrong>
(White)
(White
w/black stripe)
Chassis
(Gray
w/black stripe)
(Gray)
Chassis
• Use ungrounded speaker only.
• The maximum speaker input should be 50 W or more. (If used with the optional
power amplifier, the speaker input should be higher than the maximum amplifier
output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected separately
using parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30 cm
apart) from the antenna and antenna extension cord.
• Never connect the speaker cord to
the body of the car.
• Do not use a 3-wire type speaker
system having a common earth
lead.
• Do not connect more than one
speaker to one set of speaker
leads.
Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or
connecting the unit directly without a fuse, could cause fire or damage to the unit.
If the fuse replacement fails, consult your nearest Panasonic Service center.
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for
routine exterior cleaning. Never use benzine, thinner, or other solvents.
Troubleshooting
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch the power off.
Disconnect the power connector and check that there is neither
smoke nor heat from the unit before asking for repairs. Never try
to repair the unit by yourself because it is dangerous to do so.
No power.
Trouble
Car’s ignition switch is not on.
➡Turn your car’s ignition switch to ACC or ON.
Cables are not correctly connected.
➡Connect the cables correctly.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always active.
Accessory cable is not correctly connected.
➡Connect the accessory cable to your car’s ACC source.
Grounding wire is not correctly connected.
➡Connect the grounding wire to a metal part of the car.
Fuse is burnt.
➡Call the store where you purchased the unit, or your nearest Service
center and ask for fuse replacement.
Cautions:
• Do not use the unit if it malfunctions or if
there is something wrong.
• Do not use the unit in irregular condition,
for example, without sound, or with
smoke or foul smell, which can cause
ignition or electric shock. Immediately
stop using it and call the shop where you
purchased this unit.
Cause/Step
Troubleshooting Tips
❐Common
No sound.
Mute is set to ON.
➡Set it to OFF.
Noise.
The ground lead is not connected properly.
➡Connect the ground lead properly.
Cables are not correctly connected.
➡Connect the cables correctly.
Trouble
No sound from left,
right, front, or rear
speaker.
Left and right balance, or front and rear balance is off on one side.
➡Adjust BAL/FAD as appropriate.
Cables are not correctly connected.
➡Connect the cables correctly.
The right speaker wire is connected to the left speaker and the left speaker
wire to the right speaker.
➡Connect the speaker wires to the correct one.
Left and right sounds are
reversed in stereo
listening.
Cause/Step
❐Sound Setting
E
N
G
L
I
S
H
18
CQ-R223WA
29
Specifications
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
A are trademarks of Dolby Laboratories Licensing Corporation.
❏General
Power Supply : 12 V DC (11 V – 16 V) Test Voltage 14.4 V, Negative ground
Maximum Power Output : 50 W
× 4 (at 4Ω)
Tone Action : Bass ; ± 12 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
Current Consumption : Less than 2.5 A (tape mode, 0.5 W 4-speaker)
Pre-Amp Output Voltage : 2.0 V (CD Play mode; 1kHz 0 dB)
Speaker Impedance : 4 Ω (4 - 8 Ωacceptable)
Dimensions : 178(W)
× 50(H) ×155(D) mm
Weight : 1.4 k
g
❏AM Radio
Frequency Range : 531 – 1 602 kHz
Useable Sensitivity : 28 dB µV (S/N 20 dB)
❏FM Stereo Radio
Frequency Range : 87.5 - 108.0 MHz
Useable Sensitivity : 13.2 dB µV (S/N 30 dB)
Stereo Separation : 35 dB (at 1 KHz)
❏Tape Player
Reproduction System : 4-track, 2-program stereo
Tape Speed : 4.76 cm/sec
FF/REW Time : Less than 110 sec (C-60)
Frequency Response : 35 - 14 000 Hz ±3 dB (normal)
: 35 - 17 000 Hz ±3 dB (metal)
Wow and Flutter : 0.12 % (WRMS)
Signal/Noise Ratio : 52 dB (Dolby B NR OFF)
: 62 dB (Dolby B NR ON)
Note: Specifications and design are subject to modification without notice due to improvements in technology.
E
N
G
L
I
S
H
17
Troubleshooting (continued)
CQ-R223WA
28
Trouble
Much noise in FM stereo
and monaural
broadcasts.
The antenna ground lead is not connected properly.
➡Connect the antenna ground lead properly.
Preset station is reset.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always active.
The radio antenna is not extended enough.
➡Extend fully the radio antenna.
Cause/Step
❐Radio
Trouble
No sound.
Blank tape is inserted in the unit.
➡Insert recorded tape into the unit.
Tape sound quality is
poor.
Heads are dirty.
➡Clean heads. (Ask a service representative for advice.)
Poor quality tape.
➡Use better quality tape.
High tones are
improperly emphasized.
Dolby B NR tape plays with Dolby B NR off.
➡Set Dolby B NR to ON.
Metal type tape plays with normal mode.
➡Change Normal mode to Metal mode.
Reproduction of high
tones is poor.
Non-Dolby B NR tape plays with Dolby B NR on.
➡Set Dolby B NR to OFF.
Normal type tape plays with Metal mode.
➡Change Metal mode to Normal mode.
Heads are magnetized.
➡Demagnetize heads. (Ask a service representative for advice.)
Wow and flutter level is
very high.
Tape running mechanism is dirty or out of order.
➡Clean tape running mechanism, or repair it. (Ask a service
representative for advice.)
Cause/Step
❐Cassette Tape
Trouble
Buttons are invalid for
operation.
Battery poles (+) (–) are reversed.
➡Insert the battery correctly.
Wrong battery.
➡Check the battery.
Battery has run down.
➡Replace the battery.
Remote control is in the wrong direction.
➡Direct the remote control at sensor (REMOTE) on the panel.
Cause/Step
❐Remote Control
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
Panasonic CQR223WA Istruzioni per l'uso
- Categoria
- Lettore CD
- Tipo
- Istruzioni per l'uso
in altre lingue
Documenti correlati
-
Panasonic CQRG133WA Istruzioni per l'uso
-
-
-
-
-
-
-
-
-