Kenwood krc 678 rv Manuale utente

Marca: Kenwood

Modello: krc 678 rv

Categoria: Ricevitori multimediali per auto

Tipo: Manuale utente

Questo manuale è adatto anche per

KRC-678R

KRC-678RV

KRC-578R

B64-1635-00 (EN)

CASSETTE RECEIVER

INSTRUCTION MANUAL

— 2 —

English

Contents

Before use

Safety precautions ........................................................................3

General features

Power............................................................................................5

Volume..........................................................................................5

Attenuator .....................................................................................5

Switching Modes..........................................................................6

TEL Mute ......................................................................................6

Theft Deterrent Faceplate.............................................................6

Loudness ......................................................................................8

Audio Control Setting....................................................................8

Mobile Preset................................................................................9

Tuner features

Tuning .........................................................................................10

Station Preset Memory...............................................................10

Switching Display for Tuner........................................................10

RDS features

RDS (Radio Data System)...........................................................12

Enhanced Other Network ...........................................................12

Alarm...........................................................................................12

Traffic Information Function........................................................12

Presetting Volume for Traffic Information/News........................13

Radio Text Scroll .........................................................................13

Programme Type (PTY) Function................................................14

Cassette player features

Playing Cassette Tapes...............................................................16

Fast Forwarding and Rewinding Cassette Tapes .......................16

Using Dolby B Noise Reduction..................................................16

Switching Tape Types.................................................................16

Using DPSS (Direct Programme Search System).......................17

Blank Skip ...................................................................................17

Music Repeat..............................................................................17

Tape counter display...................................................................18

External disc control features

Playing Disc mode ......................................................................19

Switching Display for Discs ........................................................20

Fast Forwarding and Reversing Disc Play ..................................20

Track Search ...............................................................................20

Disc Search.................................................................................21

Track / Disc Repeat.....................................................................21

Presetting Disc Names (DNPS) ..................................................22

Track Scan...................................................................................22

Disc Scan ....................................................................................23

Text Scroll ...................................................................................23

Random Play...............................................................................24

Magazine Random Play...............................................................24

Menu settings

Menu System .............................................................................25

Touch Sensor Tone.....................................................................26

Manual Time Adjustment............................................................26

Calendar Adjustment ..................................................................26

Calendar Mode............................................................................26

Memo Mode...............................................................................26

Automatic Time Adjustment.......................................................27

Code Security Function...............................................................28

Selectable Illumination................................................................29

Contrast Adjustment...................................................................29

Dimmer .......................................................................................29

Switching Graphic Display ..........................................................29

Black Mask..................................................................................29

ec4/dB (Sound Coodinate system) .............................................29

News Bulletin Function with PTY News Timeout Setting..........30

Local Seek Function....................................................................30

Selecting Tuning Mode...............................................................30

Auto Memory Entry ....................................................................30

AF (Alternative Frequency) Function...........................................31

Restricting RDS Region (Region Restrict Function)....................31

Auto TP Seek Function ...............................................................31

Monaural Reception....................................................................31

Text Scroll ...................................................................................32

Installation

Accessories.................................................................................33

Installation Procedure .................................................................33

Connecting Cables to Terminals.................................................34

Installation...................................................................................35

Locking the faceplate to the unit................................................37

Troubleshooting Guide .......................................38

Specifications .....................................................41

— 3 —

To prevent injury and/or fire, take the

following precautions:

• Insert the unit all the way until it is fully

locked in place. Otherwise it may fly out of

place during collisions and other jolts.

• When extending the ignition, battery or

ground cables, make sure to use automotive-

grade cables or other cables with an area of

0.75mm

(AWG18) or more to prevent cable

deterioration and damage to the cable

coating.

• To prevent short circuits, never put or leave

any metallic objects (e.g., coins or metal

tools) inside the unit.

• If the unit starts to emit smoke or strange

smells, turn off the power immediately and

consult your Kenwood dealer.

• Make sure not to get your fingers caught

between the faceplate and the unit.

• Be careful not to drop the unit or subject it to

strong shock.

The unit may break or crack because it

contains glass parts.

• Do not touch the liquid crystal fluid if the

LCD is damaged or broken due to shock. The

liquid crystal fluid may be dangerous to your

health or even fatal.

If the liquid crystal fluid from the LCD

contacts your body or clothing, wash it off

with soap immediately.

2WARNING

To prevent damage to the machine,

take the following precautions:

• Make sure to ground the unit to a negative

12V DC power supply.

• Do not open the top or bottom covers of the

unit.

• Do not install the unit in a spot exposed to

direct sunlight or excessive heat or humidity.

Also avoid places with too much dust or the

possibility of water splashing.

• Do not set the removed faceplate or the

faceplate case in areas exposed to direct

sunlight, excessive heat or humidity. Also

avoid places with too much dust or the

possibility of water splashing.

• To prevent deterioration, do not touch the

terminals of the unit or faceplate with your

fingers.

• Do not subject the faceplate to excessive

shock, as it is a piece of precision equipment.

• When replacing a fuse, only use a new one

with the prescribed rating. Using a fuse with

the wrong rating may cause your unit to

malfunction.

• To prevent short circuits when replacing a

fuse, first disconnect the wiring harness.

• Do not place any object between the

faceplate and the unit.

• During installation, do not use any screws

except for the ones provided. The use of

improper screws might result in damage to

the main unit.

2CAUTION

• Do not apply excessive force to the open

faceplate or place objects on it. Doing so will

cause damage or breakdown.

IMPORTANT INFORMATION

You cannot connect the unit directly to the

following CD automatic changers. For users

who want to use older changers with the

unit, follow the directions below according to

the type of changer you own:

• KDC-C200 / KDC-C300 / KDC-C400

Use the extension cable and the control box

attached to the CD changer, and the optional

CA-DS100 converter cable.

• KDC-C301 / KDC-C600 / KDC-C800 / KDC-

C601 / KDC-C401

Use the extension cable attached to the CD

changer, and the optional CA-DS100

converter cable.

• KDC-C100 / KDC-C302 / C205 / C705 /

non-Kenwood CD changers

Cannot be used with this model.

You can damage both your unit and

the CD changer if you connect them

incorrectly.

2CAUTION

Safety precautions

— 4 —

English

• If you experience problems during

installation, consult your Kenwood dealer.

• If the unit does not seem to be working

right, try pressing the reset button first. If

that does not solve the problem, consult

your Kenwood dealer.

• Characters in the LCD may become difficult

to read in temperatures below 41 ˚F (5 ˚C).

• The illustrations of the display and the panel

appearing in this manual are examples used

to explain more clearly how the controls are

used. Therefore, what appears on the display

in the illustrations may differ from what

appears on the display on the actual

equipment, and some of the illustrations on

the display may represent something

impossible in actual operation.

• The functions that can be used and the

information that can be displayed will differ

depending on the external disc players being

connected.

NOTE

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get

dirty, wipe them with a dry, soft cloth.

Cleaning the Unit

If the front panel gets dirty, turn off the

power and wipe the panel with a dry silicon

cloth or soft cloth.

Do not wipe the panel with a stiff cloth or a

cloth dampened by volatile solvents such as

paint thinner and alcohol. They can scratch

the surface of the panel and/or cause the

indicator letters to peel off.

2CAUTION

Safety precautions

Cleaning the Tape Head

After you have used the tape player many

times over a long period, magnetic powder

from the tapes and dust accumulates on the

tape head, causing noise and a deterioration

in sound quality. Clean the tape head using a

cleaning tape or cleaning kit designed for use

in car audio systems.

Handling Cassette Tapes

• Do not play a cassette whose tape has gone

slack. In such a case, wind it tight using a

pencil or the like in one of the spools.

Playing slack cassette tapes can result in the

tape tangling around the capstan and/or

pinch rollers, causing trouble.

• Do not play a deformed cassette or one

whose label is starting to come off, as it can

cause the unit to malfunction.

• Do not leave tapes in hot places, such as

above the fascia panel (dashboard) and other

spots exposed to direct sunlight, or near

heater outlets. They can deform the

cassette.

• Avoid using extremely long cassette tapes,

such as 100-minute-long tapes. Such tapes

are very thin, and can tangle easily around

the pinch rollers or other parts inside the

unit, causing unit failure.

• Remove a cassette tape from the unit when

not listening to it for a whilst. If you leave a

tape in the unit too long, it may stick to the

tape head and cause unit malfunction.

Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing

Corporation.

”DOLBY” and the double-D symbol are

trademarks of Dolby Laboratories Licensing

Corporation.

DISC

PROG/PTY

DAB

EJECT

PWR

OFF

LOUD

VOL ADJ

DISP

NAME.S

SCANB NR B.S/RDM REP

D.SCN

MTL/M.RDM

DISC

AUD

Reset button

Turning on the power:

Press the SRC button.

Turn the power on before carrying out the following procedures.

Turning off the power:

Hold down the PWR OFF button for one second or more.

NOTE

Power

General features

— 5 —

ATT indicator

LOUD indicator

DISC

PROG/PTY

DAB

EJECT

PWR

OFF

LOUD

VOL ADJ

DISP

NAME.S

SCANB NR B.S/RDM REP

D.SCN

MTL/M.RDM

DISC

¢

SRC/

PWR OFF

ATT/

LOUD

AUD

AUDAUD

#1-6

NAME.S

KRC-678R/678RV

KRC-578R

Release button

Increasing Volume:

Press the u button to turn up the volume.

Decreasing Volume:

Press the d button to turn down the volume.

Volume

This function allows you to turn down the volume quickly.

Turning Attenuator On/Off:

Press the ATT button to switch the attenuator on and off.

When the attenuator is on, the ATT indicator blinks.

When the attenuator is off, the volume returns to the original

level.

Turning the volume up, or turning it all the way down deactivates

the attenuator function.

NOTE

Attenuator

ATT indicator

The faceplate can be reversed to hide the control panel or

detached form the unit, helping to deter theft.

Removing the Faceplate:

• When the control panel is visible

Press the release button.

• When the control panel has been hidden

Press the upper side of the faceplate.

Holding the centre part of the faceplate, pull it out.

Theft Deterrent Faceplate

Shut down the audio system temporarily whenever an

incoming call is received.

The function will not work if a cable is not connected to the car

phone.

When the telephone rings:

When a call is received, "CALL" is displayed and all the unit

functions are temporarily interrupted.

Restoring Original Unit Source During Phone Call:

Press the SRC button.

"CALL" disappears from the display, and the volume of the

original source is restored gradually.

Turning TEL Mute Function Off After Phone Call:

Hang the phone up.

"CALL" disappears from the display.

The original source (i.e., the one used before the phone call) is

returned to automatically, and the volume restored gradually.

NOTE

TEL Mute

General features

— 6 —

English

Switching Modes:

Each time you press the SRC button, the mode switches as

follows:

Selecting the standby mode:

Press the SRC button repeatedly to select to "ALL OFF" .

When "ALL OFF" is displayed, the standby mode is turned on.

The standby mode turns all functions off although leaving the

unit’s power on. Use this mode when you want to have the

display illuminated but do not want to listen to anything.

• The mode switches to the next mode from any mode which

cannot be used.

• The external disc control mode will differ depending on the unit

that is connected.

• The AUX mode is available only when the changer / AUX

switching adapter (KCA-S210A or CA-C1AX) or CD changer

(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is

connected to this unit.

During the AUX mode, "AUX" / AUX-name will show in the

display. When the CA-C1AX is being used, the AUX Mode will

replace the External Disc Control Mode.

Presetting AUX-name

In the AUX mode, press the NAME.S button for two seconds or

more. "NAME SET" is display and AUX-name mode is entered.

Input the characters, referring to the section on "Presetting Disc

Names (DNPS)" (page 22).

NOTE

▼

Tuner mode

▼

Tape mode

▼

External disc control mode 1

▼

External disc control mode 2/AUX mode

▼

Standby mode

Switching Modes

Press the right side of the faceplate until it locks.

Hiding the control panel:

Press the release button and slide open the faceplate.

Push upward the back of the control panel and reverse the

panel.

The panel cannot be reversed when the faceplate is not attached.

Opening the control panel:

Press the upper side of the faceplate.

The faceplate will open.

Push the bottom of the control panel and close the faceplate.

The buttons do not work when the control panel is slided.

NOTE

— 7 —

Push back the bottom of the faceplate bracket until it locks.

• Do not apply excessive force to the faceplate bracket without

attaching the faceplate. Doing so will cause the faceplate

bracket to be deformed.

• Do not touch the connector on the faceplate bracket after

removing the faceplate. Touching the connector may cause

damage to the unit.

• Do not touch two metal parts on both sides of the faceplate

bracket. Touching those parts may injure you.

• The faceplate is a precision piece of equipment and can be

damaged by shocks or jolts. For that reason, keep the faceplate

in its special storage case whilst detached.

• Do not expose the faceplate or its storage case to direct

sunlight or excessive heat or humidity. Also avoid places with

too much dust or the possibility of water splashing.

Reattaching the Faceplate:

Hold the faceplate so that the control panel faces the front

toward you and set the left side of the faceplate in the

faceplate bracket.

Do not set the right side of the faceplate in the faceplate bracket

first, when reattaching the faceplate. Doing so may cause the

connector on the faceplate bracket to malfunction.

2CAUTION

NOTE

2CAUTION

“Fader/FAD” : Adjust the fader level.

Setting values: Front 15 – Rear 15

“Balance/BAL” : Adjust the balance level.

Setting values: Left 15 – Right 15

“Treble/TRE” : Adjust the treble level.

Setting values: - 8 – + 8

“Bass/BAS” : Adjust the bass level.

Setting values: - 8 – + 8

"dB/DB" : Recalling the kenwood preset sound setting

Press the preset buttons (#1-6).

Settings: #1;Flat, #2;Rock, #3;Pops/Top40, #4;Jazz, #5;Easy,

#6;Scan of #1-5

• This mode is available only when the Sound coordinate system

is on. (page 29)

• You can call the following settings with this function; bass

centre frequency, bass level, bass quality factor, bass

extension, treble centre frequency, and treble level setting.

Their setting values are different depending on the setting of

the mobile preset plan mode.

NOTE

Adjust various parameters of sound quality.

Press the AUD button to enter the control mode.

Selecting mode

Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will

change.

Please refer to the following for the contents of the

adjustment modes.

Source tone memory

Each source (tape, FM, AM, and disc changer) has its own

memory in which to store the bass and treble tone settings.

The settings made for a particular source are then recalled

automatically whenever you use that source (e.g., FM mode uses

the tone settings made for FM, AM for AM, etc.).

Adjust each mode

Press the 4/¢ button.

Please refer to the following for the adjusting values.

Press the AUD button to end the control mode.

NOTE

Audio Control Setting

General features

— 8 —

English

This function amplifies low and high tones when the volume is

turned down.

The LOUD indicator lights up, when the loudness function is

on.

Turning Loudness On/Off:

Hold down the LOUD button for one second or more to switch

the loudness on and off.

Loudness

Tuner features

— 9 —

This function allows you to adjust the setting that is recalled

with the sound coordinate system, according to types of

speakers.

Press the SRC button repeatedly to select the standby mode.

"ALL OFF" is displayed when the standby mode is selected.

Press the AUD button to enter the mobile preset plan mode.

Press either the 4 or ¢ button to select the type of

speaker. The setting switches as follows.

Off / For the OEM speaker / For 6/6x9 in. speaker /

For 5/4 in. speaker

Press the AUD button to end the mobile preset plan mode.

• This mode is available only when the Sound coordinate system

is on. (page 29)

• When you change the setting of type of speaker, the bass and

treble tone settings are returned to original levels.

NOTE

Mobile Preset

"V OFFSET/VOS" : Set the sound level of the each source

selected by adjusting the level difference

between the basic sound level and the

required level.

Setting values: - 8 – ± 0

Frequency

Band display

ST indicator

AUTO indicator

ST indicator

Frequency

Band display

AUTO indicator

DISC

PROG/PTY

DAB

EJECT

PWR

OFF

LOUD

VOL ADJ

DISP

NAME.S

SCANB NR B.S/RDM REP

D.SCN

MTL/M.RDM

DISC

#1-6

¢

SRC

DISP

AUDAUD

KRC-678R/678RV

KRC-578R

Preset station number

You can change the display used when listening to the radio.

Switching the Display:

Pressing the DISP button switches the display as follows.

Select the Radio Text Display mode.

Displaying Frequencies:

Hold down the DISP button for one second or more.

The frequency for the RDS station will be displayed for five

seconds instead of the station name.

• If the RDS station currently tuned to is transmitting no text

whilst the Radio Text Display mode is turned on, "NO TEXT" will

appear in the display. Whilst awaiting reception, "WAITING" will

be displayed.

NOTE

Date

Programme Service name (during RDS station reception)/Station frequency

Radio text

Clock

Switching Display for Tuner

Select the band/ station that you want to have stored.

Hold down the button (#1-6) that you want to use for the

station, for two seconds or more.

The button number blinks once in the display to indicate that

the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station.

The number of the recalled station is displayed.

You can store 6 stations in each of the FM1, FM2, FM3, and AM

(MW and LW) bands.

NOTE

Store the frequency of the station currently being listened to.

You can then recall that station with a single touch of a button.

Station Preset Memory

Press the SRC button repeatedly until the tuner mode is

obtained. "TUNER" is displayed only when the tuner mode is

selected.

Press either the FM or AM button to select the band.

Each time you press the FM button, the band switches

between the FM1, FM2 and FM3.

Press the AM button to select the MW and LW bands.

• Auto Seek Tuning

Press the ¢ button to seek increasing frequencies.

Press the 4 button to seek decreasing frequencies.

• Preset station seek tuning

Press the ¢ button to move to the next preset station (i.e.,

the one with the next highest number), and the 4 button to

move to the last preset station (i.e., the one with the next

lowest number).

If the frequencies stored at the preset numbers receive

stations which were not originally memorized when traveling

long distances, the preset number is not displayed. In such

cases, pressing the 4/¢ button to use preset station

seek will receive channel 1.

• Manual Tuning

Press the ¢ button to increase the frequency by one step.

Press the 4 button to decrease the frequency by one step.

• The ST indicator lights up when stereo broadcasts are being

received.

• Please see the menu settings about selecting tuning mode.

(page 30)

NOTE

Tuning

Tuner features

— 10 —

English

RDS features

• The £ indicator lights whilst the clock is displayed.

To prevent accidents, drivers should not look at the display whilst

on the road.

2WARNING

— 11 —

DISC

PROG/PTY

DAB

EJECT

PWR

OFF

LOUD

VOL ADJ

DISP

NAME.S

SCANB NR B.S/RDM REP

D.SCN

MTL/M.RDM

DISC

#1-6

¢

DISP

PTY

TI/

TI VOL ADJ

AUDAUD

KRC-678R/678RV

KRC-578R

TI indicator

Band display

You can listen to traffic information. If you are listening to

tapes or discs, they will continue playing until a traffic bulletin

is broadcast.

Turning TI function On/Off:

Press the TI button to turn the function on and off.

When the function is on, the TI indicator is turned on.

When none is being received, the TI indicator will blink on and

off. When a traffic information station is being received, the TI

indicator will turn on.

When a traffic bulletin begins to be broadcast, “TRAFFIC” will

be displayed, and reception will begin at the preset volume.

If you are listening to a tape or disc when a traffic bulletin

begins, they will automatically be turned off. When the bulletin

ends or poor reception is experienced, the tape or disc will

begin playing again.

Pressing the TI button whilst in the MW/LW band automatically

switches reception to the FM band. However, the MW/LW band

is not returned to when the TI button is pressed again.

Switching to a Different Traffic Information Station:

Use the 4 / ¢ buttons to make an auto seek of the TI

stations in a certain band.

• When you are listening to a tape or disc, you cannot change to

another TI station.

• When the auto TP seek function is turned on and reception

starts to weaken, the tuner automatically seeks traffic

information stations with better reception.

• If you are tuned to a station that is not a traffic information

station itself but which provides <Enhanced Other Network>

services, you can still have traffic information received.

• Holding the TI button down for one second or more when the

TI function is on in the disc control mode results in a change to

the frequency display of the traffic information station for five

seconds.

NOTE

Traffic Information Function

When an emergency transmission (announcing disasters, etc.)

is sent, all current functions are interrupted to allow the

warning to be received.

Alarm

Stations that offer <Enhanced Other Network> also transmit

information about other RDS stations that have traffic

information. When you are tuned to a station that is not

transmitting traffic information, but another RDS station starts

transmitting a traffic bulletin, the tuner automatically switches

to the other station for the duration of the bulletin.

Enhanced Other Network

RDS is a digital information system that lets you receive

signals besides those of regular radio programmes, such as

network information being transmitted from radio stations.

When listening to an RDS station (ie, a station with RDS

capability), the programme service name of the station is

displayed along with the frequency, advising you quickly which

station is being received.

RDS (Radio Data System) stations also transmit frequency data

for the same station. When you are making long trips, this

function automatically switches to the particular frequency

with the best reception for the particular network of stations

that you want to listen to. The data is automatically stored,

allowing you to switch quickly to another RDS stations,

broadcasting the same programme, that has better reception.

These include stations stored in the station preset memory that

you often listen to.

RDS (Radio Data System)

RDS features

— 12 —

English

Please see the menu settings (page 32) about switching between

manual scrolling and automatic scrolling.

NOTE

This function permits the text to be scrolled and the entire text

to be displayed. The scrolling method differs depending on the

setting of scrolling in the menu.

To scroll manually:

Press the DISP button to display the Radio Text.

Holding down the DISP button for one second or more results

in one scrolling display of the text.

To scroll automatically:

Press the DISP button to display the Radio Text.

The text will be displayed in one scrolling display.

Holding down the DISP button for one second or more results

in one scrolling display of the text.

Radio Text Scroll

Preset the volume level to be used for traffic information and

news broadcasts.

Tune into the station for which you want to set the volume.

Adjust the volume to the desired level.

Hold down the TI VOL ADJ button for two seconds or more.

The volume level blinks once in the display to indicate that the

data has been stored.

Future traffic information/news broadcasts are heard at the

preset level.

• The volume cannot be lowered by this function during tuner

reception. The volume is only set when it is louder than the

listening volume of the tuner.

• You can arrange only to listen to traffic information or news

bulletins with at preset volume with the volume set at

minimum.

NOTE

Presetting Volume for Traffic Information/News

— 13 —

16. Weather (Weather) (WEATHER)

17. Finance (Finance) (FINANCE)

18. Children’s programmes (Children) (CHILDREN)

19. Social Affairs (Social A) (SOCIAL A)

20. Religion (Religion) (RELIGION)

21. Phone In (Phone In) (PHONE IN)

22. Travel (Travel) (TRAVEL)

23. Leisure (Leisure) (LEISURE)

24. Jazz Music (Jazz) (JAZZ)

25. Country Music (Country) (COUNTRY)

26. National Music (Nation M) (NATION M)

27. Oldies Music (Oldies) (OLDIES)

28. Folk Music (Folk M) (FOLK M)

29. Documentary (Document) (DOCUMENT)

(

Speech

.....1~9,16~23, 29,

Music

.....10~15, 24~28)

• You can select the type of programme directly by pressing a

preset button. The buttons are factory-set to the following

type of programmes:

Music

Speech

3. News

4. Other Music 5. Serious Classical 6. Varied

Changing the Preset Button Settings for Programme Type

After selecting the type of programme to be stored in a certain

preset button, press that button for at least two seconds.

The previously stored data for that button are erased and the

new programme type is stored.

Seeking the selected programme type

Press the 4 or ¢ button to make a seek of frequencies

with your selected type of programme.

The display blinks and the seek starts.

"PTY" blinks in the display for about 30 seconds.

If you make no key input in 30 seconds, the PTY selection

mode will turn off automatically.

If no programme can be found, "NO PTY" is displayed.

If you want to select another type of programme, repeat steps 2

and 3 above.

Switching to Other Stations with the Same Type of Programme:

When "PTY" is blinking in the display, perform auto seek

tuning.

NOTE

Conduct auto seek tuning only on those stations with selected

kinds of programmes.

Press the 38(PTY) button.

"PTY" is displayed, and the Programme Type Selection (PTY)

Mode entered.

If you make no key input in 30 seconds, the mode will

automatically turn off.

You cannot use this function whilst the traffic bulletin is received.

Changing the Display Language to French, German, or Swedish

In the PTY mode, press the DISP button to display the name of

the language currently used.

If you want to change the language, press the preset button for

the desired language and then the DISP button.

English is #1, French is #2, German is #3, and Swedish is #4

Select the type of programme to be received

• Press either the FM or AM buttons repeatedly until the type

of programme you want to listen to.

The selection includes:

Programme type KRC-678R/678RV KRC-578R

Speech (Speech) (SPEECH)

Music (Music) (MUSIC)

1. News (News) (NEWS)

2. Current Affairs (Affairs) (AFFAIRS)

3. Information (Info) (INFO)

4. Sports (Sport) (SPORT)

5. Education (Educate) (EDUCATE)

6. Drama (Drama) (DRAMA)

7. Culture (Culture) (CULTURE)

8. Science (Science) (SCIENCE)

9. Varied (Varied) (VARIED)

10. Pop Music (Pop M) (POP M)

11. Rock Music (Rock M) (ROCK M)

12. Easy Listening Music (Easy M) (EASY M)

13. Light Classical (Light M) (LIGHT M)

14. Serious Classical (Classics) (CLASSICS)

15. Other Music (Other M) (OTHER M)

NOTE

Programme Type (PTY) Function

RDS features

— 14 —

English

Cassette player features

The tuner scans for another station with the same type of

programme.

Cancelling Programme Type Function During Its Operation:

Press the 38(PTY) button.

— 15 —

Tape side

indicator

Tape side

B NR indicator

MTL indicator

DISC

PROG/PTY

DAB

EJECT

PWR

OFF

LOUD

VOL ADJ

DISP

NAME.S

SCANB NR B.S/RDM REP

D.SCN

MTL/M.RDM

DISC

REP

¢

SRC

PROG

DISP

B.S

MTL

B NR

AUDAUD

KRC-678R/678RV

KRC-578R

IN indicator

Tape running display

Release button

Tape running display

Function of the KRC-678R/KRC-678RV

Select type of tape being played.

Switching Tape Types:

Press the MTL button to switch the MTL indicator on and off

and to select the tape type.

Turn the MTL indicator off for normal tape (Type I) playback.

Turn the MTL indicator on for the following tape types:

CrO

(Type II) FeCr (Type III) Metal (Type IV)

Switching Tape Types

Function of the KRC-678R/KRC-678RV

Listen to tapes recorded using the Dolby B NR system.

Turning Dolby NR On/Off:

Press the B NR button to switch Dolby B NR on and off.

The B NR indicator lights up when Dolby B NR is turned on.

Using Dolby B Noise Reduction

Fast Forwarding Tapes:

Press the FM button.

Rewinding Tapes:

Press the AM button.

Cancelling:

Press the PROG button.

Normal tape play returns.

Fast Forwarding and Rewinding Cassette Tapes

the tape head and cause the unit to malfunction.

• The only buttons that will work during the eject state are the 0

and ATT buttons.

Loading and Playing Cassettes:

Press the release button to slide open the faceplate, showing

the cassette insertion slot.

Holding the cassette with the tape exposed to the right, insert

it in the slot. The tape will start playing.

Push back the bottom of the faceplate with your hand until it

locks.

The IN indicator lights up when a cassette has been loaded.

When inserting a cassette make sure the cassette has been

completely drawn in before pushing back the faceplate. Failing to

do so might deform the tape.

Playing Cassettes Already Loaded:

Press the SRC button repeatedly until the tape mode is

obtained.

"TAPE" is displayed when the tape mode has been selected.

The tape will start playing.

Listening to the other side:

Press the PROG button.

Tape play switches to the other side.

Ejecting Cassettes:

Press the release button and slide open the faceplate.

Press the 0 button.

The tape stops playing and the cassette ejects.

Push back the bottom of the faceplate with your hand until it

locks.

• When the faceplate has been slid open, it might interfere with

the shift lever or something else. If this happens, pay attention

to safety and move the shift lever or take an appropriate action,

then operate the unit.

• Do not use the unit with the faceplate in the open condition.

Doing so will cause breakdown.

• Remove a cassette from the unit when not listening to it for a

whilst. If you leave it in the unit too long, the tape may stick to

NOTE

2CAUTION

Playing Cassette Tapes

Cassette player features

— 16 —

English

Repeatedly plays the current track.

Turning Music Repeat Function On/Off:

Press the REP button to switch the music repeat function on

and off.

“Repeat/REP ON” is displayed when music repeat is turned

on.

Cancelling Music Repeat Function:

Press either the REP or PROG button.

The music repeat function "knows" where a track begins by

detecting the blank space preceding it (i.e., the space between

tracks). However, when the blank space lasts for less than 4

seconds or contains noise, this function may not operate

correctly. Furthermore, sections recorded at low levels may

trigger the function if they last for 4 seconds or more.

NOTE

Music Repeat

Automatically fast forwards to the beginning of the next track

when long blank spaces (10 seconds or more) are detected,

continuing tape playback. This function is on, when unit is first

powered on.

Turning Blank Skip Function On/Off:

Press the B.S button to switch the blank skip function on and

off.

“B.Skip/B.S ON” is displayed when the blank skip function is

turned on.

• If the blank space contains hiss noise, the blank skip function

may not work correctly.

• Sections recorded at low levels may trigger the blank skip

function if they last for 10 seconds or more.

NOTE

Blank Skip

Skip forwards or backwards to other tracks during playback.

Skipping to Beginning of Current Track or to Previous Tracks

(Rewind DPSS):

Press the 4 button.

Press once to rewind to the beginning of the current track,

twice to rewind to the beginning of the previous track, and so

forth.

You can skip up to 9 tracks this way.

Playback is continued after the tape is rewound by the

indicated number of tracks.

Skipping to Later Tracks (Fast Forward DPSS):

Press the ¢ button.

Press once to fast forward to the next one track, twice to fast

forward to the track after that, and so forth.

Up to 9 tracks can be skipped.

Playback is continued after the tape is fast forwarded by the

indicated number of tracks.

• During the first 5 seconds of each track, the previous track is

considered the "current" track (i.e., the "0" track). If you press

the 4 button during that period, the tape rewinds to the

beginning of the previous track and not the one you are

listening to.

• The DPSS function "knows" where a track begins by detecting

the blank space preceding it (i.e., the space between tracks).

However, when the blank space lasts for less than 4 seconds

or contains noise, DPSS may not operate correctly.

Furthermore, quiet intervals within a song are detected as

"blank spaces" if they last for 4 seconds or more.

Cancelling DPSS During Its Operation:

Press the PROG button.

NOTE

Using DPSS (Direct Programme Search System)

Selecting the wrong tape type may cause sound quality to

suffer.

— 17 —

External disc control features

Switching the Tape display :

Each time you press the DISP button, the display during tape

play switches as follows:

• The tape counter is not exact, but only represents an

approximation of the elapsed time.

• The £ indicator lights whilst the clock is displayed.

NOTE

Play side/Tape counter

Clock

Date

Play side

Play side/Tape running

Tape counter display

Cassette player features

— 18 —

English

Track number

Disc number

Track time

Track number

Track time

Disc number

DISC

PROG/PTY

DAB

EJECT

PWR

OFF

LOUD

VOL ADJ

DISP

NAME.S

SCANB NR B.S/RDM REP

D.SCN

MTL/M.RDM

DISC

REP

¢

DISC+

SRC

DISC-

DISP/

NAME.S

RDM

M.RDM

D.SCN

SCAN

AUDAUD

KRC-678R/678RV

KRC-578R

This funciton permits the connection of optional players and

the playing of discs.

Playing Discs:

Press the SRC button repeatedly to select the external disc

control mode.

The disc will start playing.

The external disc control mode will differ, depending on the unit

that is connected.

Mode Display Examples

• "CD" ...when a CD player is connected

• "DISC" ...when a disc changer is connected

• "DISC-1" , "DISC-2" ...when two disc changers are connected

Pausing and Restarting Disc Play:

Press the 38 button to make the disc pause.

Press the same button again to start play again.

• When one disc has finished playing its last track, the next disc

in the changer starts playing. When the last disc in the changer

has finished, the player returns to the first disc and starts

playing it.

• Disc #10 is displayed as "0".

NOTE

Playing Disc mode

■ When a unit equipped with an O-N switch is to be

connected, please also see the instruction manual of this

unit.

Set the O-N switch to "N". "N"-operation will be set.

"N"-operation:

• The disc title and track title of the CD text can be displayed.

• The disc name will be displayed when the name has been

registered to any connected unit with the Presetting Disc

Names function, or when the playing unit contains a disc to

which the disc title has been recorded.

"O"-operation:

• CD text cannot be displayed.

• Regardless of the control unit, the characters that can be

registered with the Presetting Disc Names function are "A~Z

0~9 /, +, –, ∗, =, <, >, [ , ]".

• The disc name will be displayed when the name has been

registered to the playing unit with the Presetting Disc Names

function.

The CD text, Presetting Disc Names, and Disc Name Preset Play

functions may not be operational depending on the unit.

NOTE

— 19 —

Search forwards or backwards through the tracks on the disc

until you reach the one that you want to listen to.

Making a Reverse Track Search:

Press the 4 button to display the desired track number.

Press once to search back to the beginning of the current

track, twice to search back to the beginning of the previous

track, and so forth.

Play starts at the beginning of the displayed track number.

(For disc changers)

Pressing the 4 button whilst listening to track 1 only searches

back to the beginning of that track. The reverse search is not

"recycled" to the last track on the disc.

Making a Forward Track Search:

Press the ¢ button to display the desired track number.

Press once to fast forward to the next track, twice to fast

forward to the track after that, and so forth.

Play starts at the beginning of the displayed track number.

(For disc changers)

You cannot make a forward track search when listening to the

last track on a disc.

NOTE

Track Search

Reversing Disc Play:

Hold down on the 4 button.

Release your finger to play the disc at the point.

You cannot use reverse play between tracks depending on the

model being connected. Instead, the reverse play function is

cancelled when it reaches the beginning of a track, at which

point normal play automatically resumes.

NOTE

Fast Forwarding Disc Play:

Hold down on the ¢ button.

Release your finger to play the disc at that point.

Fast Forwarding and Reversing Disc Play

Switch the display that appears whilst discs are playing.

Switching Display for Discs:

Each time you press the DISP button, the display during disc

play switches as follows.

• You can give names to discs through the presetting disc name

function (see p. 22).

Note that depending on the unit, display may not be possible.

• If you try to display the name of a disc that does not have one,

"NO NAME" is displayed instead.

• When there is an attempt to display the title of a disc for which

the disc title/track title has not been recorded, "NO TEXT" is

displayed for CD and "NO TITLE/NO NAME" is displayed for

MD.

• Depending on the type of characters of the CD Text, some

characters may not be displayable.

• The £ indicator lights whilst the clock is displayed.

NOTE

Track time

Clock

Disc name (DNPS)

Disc title (Units featuring CD text/MD only)

Track title (Units featuring CD text/MD only)

Date

Switching Display for Discs

External disc control features

— 20 —

English

La pagina sta caricando ...

Kenwood krc 678 rv Manuale utente

Marca: Kenwood

Modello: krc 678 rv

Categoria: Ricevitori multimediali per auto

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Kenwood krc 678 rv User manual

Kenwood krc 678 rv Manuale utente

Questo manuale è adatto anche per

Kenwood krc 678 rv Manuale utente

in altre lingue

Documenti correlati

Altri documenti