iON SnapCam LE Manuale utente

iON SnapCam LE™

Quick Start Guide

EN-2

Removing from the box

Step 1 Step 2 Step 3

Pull out the

transparent box.

Loosen the camera

stand by turning

clockwise.

Take out the camera

stand.

Step 4 Step 5 Step 6

Loosen the

screw by turning

counterclockwise.

Detach the camera

stand from the

camera frame.

Remove the screw.

EN-3

1. Function Keys & Interface

1

1. Lens

2. Microphone

3. Battery Lamp

4. Shutter Button

5. LED Indicator

6. Power/Mode Button

2 3 4 5

6

LED Indicator:

Green: Still/Burst

Orange: Time Lapse

Red: Video recording

EN-4

7

8

7. USB Port

8. MicroSD Slot

2. First Time Use

• Charge SnapCam LE's built-in battery before use. Simply connect

Micro USB (Type B) cable to the USB port of camera.

• Insert MicroSD card (not included) in SnapCam LE's MicroSD Slot.

• Time and date automatically set after SnapCam LE connects

to Smartphone APP or PC/Mac. Please refer to section 7 for

Smartphone Connection.

3. Mode Settings

• Press Power/Mode button.

• LED will change color to indicate current mode; will beep twice to

indicate mode change.

EN-5

• Mode will change in this order: Still/Single > Time Lapse > Video/

Normal.

• Still/Burst and Video/Loop set from Smartphone App SnapCam

LE.

4. Still Capture (Single)

• Power ON SnapCam LE by pressing Power/Mode button.

• Set "Mode" to Still/Single.

• Press Shutter button.

• Double beep indicates shutter release.

5. Video Recording

• Power ON SnapCam LE by pressing Power/Mode button.

• Change Mode to Video/Normal, then press Shutter button

• LED will blink continuously during video recording.

• Single beep means video recording has started.

• Stop video recording by pressing and holding the Shutter button for

2 seconds.

• Double beep sound indicates video recording has stopped.

EN-6

6. Connect to PC

• Ensure SnapCam LE is off, connect to PC via USB Cable.

• The camera will show "Power Charging" icon.

• Press Power/Mode button, the camera will act as a USB storage

device.

• The camera will beep twice, LED will blink Orange. After the camera

connects to PC successfully, the LED will blink green.

7. Smartphone Connection

(1)Settingtheconnectionrsttime

• Turn on the camera before going to the next step.

• Ensure Bluetooth is ON the smart device.

• Open the SnapCam LE App will connect to Bluetooth on the

camera, and then camera's Wi-Fi will be activated automatically.

• Tap Connect Option to enter the Bluetooth selection screen, and

tap the text bar of device name to choose Bluetooth device. Tap

Wake up button to wake up device's Wi-Fi.

• To connect the camera, select the camera's Wi-Fi SSID from

smartphone's setting. Or enter SSID and password (0123456789)

for auto connection.

EN-7

(2) Connect for the second time, open SnapCam LE App and click OK

for auto connection.

SnapCam LE App

8. Usage Note

• If water is spilled onto the camera, place camera MicroSD port

downwards so water does not enter the camera body.

• When PC USB charging does not work because the camera has not

been used for a long time or used properly, please charge with a DC

Adapterrst.

EN-8

FCC Statement

Warning:Changesormodicationstothisunitnotexpresslyapproved

by the party responsible for compliance could void the user’s authority

to operate the equipment.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

EN-9

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

TRADEMARK INFORMATION

® The iON logo is a registered trademark of World Wide Licenses Limited

Questions?

Need Some Help?

This manual should

help you understand

your new product.

If you still have

questions,

visit our website:

www.ioncamera.com

Like Us:

www.facebook.com/ioncamera

Tweet Us:

www.twitter.com/ioncamera

EN-10

Learn more.

Learn more about iON camera features at http://www.ioncamera.com

For instructions and safety information, see the iON User Guide.

Download the PDF at http://www.ioncamera.com/user-manuals/

Get support. (i.e. Warranty)

Visit https://www.ioncamera.com/support/ for all iON camera support.

If you are located in the United States of America, please contact

Customer Service at 855-411-4466. If you are located in Canada,

please contact Customer Service at 905-513-7733.

If you are located outside of the United States of America or Canada

please visit www.ioncamera.com for your local support service

iON SnapCa

m LE™

Schnellstartanleitung

DE-2

Entfernen aus der Box

Schritt 1 Schritt 2 Schritt 3

Ziehen Sie den

transparenten Box.

Lösen Sie die

Kamerahalterug

durch Drehen

im

Uhrzeigersinn

Nehmen Sie die

Kamera von der

Halterung

Schritt 4 Schritt 5 Schritt 6

Lösen Sie die

Schraube

gegen den

Uhrzeigersinn

drehen.

Trennen Sie die

Kamera

Halterung von

die Kamera

Gestell.

Entfernen Sie

die Schraube

DE-3

1. Hauptmerkmale & Interface

1. Objektiv

2. Mikrofon

3. Batterie-LED

4. Verschluss Taste

5. LED Anzeige

6. Netzschalter/ ModusTaste

LED Anzeige:

Grün:Still/Burst

Orange: Zeitraffer

Red: Video Aufzeichen

DE-4

7. USB Anschluss

8. MicroSD Speicherplatz

2. Erstbenutzer

• Aufladen der in der SnapCam LE integrierten Akku vor dem

Gebrauch. Verbinden Sie einfach Micro USB (Typ B) Kabel an den

USB-Anschluss der Kamera

• Stecken Sie ein MicroSD-Karte (nicht im Lieferungumfang enthalten)

in den SnapCam LE microSD-Slot.

• Stellen Sie die Zeit/Datum nach SnapCam LE Verbindung zum

Smartphone App oder PC hier. Siehe Abschnitt 7 für Smartphone-

Verbindung.

3. Modus Einstellungen

• Drucken Sie den Netzschalter/ Modus Taste

• LED ändert die Farbe, um aktuellen Modus anzuzeigen; begleitet

von einem Piepton.

DE-5

• Modus wird in dieser Reihenfolge zu ändern: Einzel Foto>

Zeitraffer> Video/Normal:

• Burst und Video/Loop können Sie mit dem Smartphone-App

SnapCam LE einstellen

4. Standbildaufnahme (Einzel)

• SnapCam LE Einschalten drücken Sie den Netzschalter/ Modus

Taste

• Modus nach still/Einzel

• Drücke den Auslöser.

• Doppelter piepton ist zu hören, wenn Foto aufgenommen wurde.

5. Videoaufnahme

• Einschalten der SnapCam LE, indem Sie den Power / Modus-

Taste drücken.

• Wechsel Modus auf Video / Normal, und drücken Sie dann den

Auslöser.

• LED blinkt kontinuierlich während der Videoaufnahme.

• Eine Single Signalton zeigt an, dass die Videoaufzeichnung

begonnen hat.

• Stoppen die Videoaufzeichnung durch Drücken der Auslöser taste für

DE-6

2 Sekunden.

• Ein doppelter Signalton zeigt an, dass Videoaufzeichnung

angehalten wurde.

6. Anschließen an den PC

• Stellen Sie sicher SnapCam LE ausgeschaltet ist, eine

Verbindung zum PC über USB-Kabel.

• Die Kamera-Symbol "aufladen" wird angezeigt

• Drücken Sie die Power / Modus-Taste, die Kamera wirkt als

USB-Speichergerät.

• Die Kamera piept zweimal, wird LED orange blinken. Nachdem die

Kamera eine Verbindung zum PC hergestellt hat, blinkt die LED

grün.

7. Smartphone Anschluss

(1) Einstellen der Verbindung zum ersten Mal.

• Schalten Sie die Kamera, bevor Sie zum nächsten Schritt.

• Stellen Sie sicher Bluetooth basiert auf dem intelligenten Gerät.

• Ö ffnen Sie die SnapCam LE App und eine Verbindung wird

hergestellt, stellen Sie sicher das Bluetooth aktiviert ist. Eine

Wi-Fi Verbindung wird dann automatisch hergestellt

• Tippen Sie auf Connect Optionen um einen Bluetooth Bildschirm

zu öffnen. klicken Sie auf die Textleiste der Gerätenamens, um

DE-7

das Bluetooth-Gerät aus zu wählen. Tippen Sie auf Wake up,

um das Wi-Fi aktivieren.

• Um die Kamera zu verbinden wählen Sie die Kamera Wi-Fi

SSID-Einstellung von Ihren Smartphones. Oder geben Sie

die SSID und das Passwort (0123456789) ein um, eine

automatisch gesicherte Verbindung herzustellen.

(2) Bei wiederholten verbinden der SnapCam LE App klicken

Sie auf OK für automatische Verbindung.

SnapCam LE App

8. Hinweis zur Verwendung

 Wenn Wasser auf die Kamera gelangt, legen Sie die

Kamera MicroSD-Anschluss nach unten, so kein Wasser in

das Kameragehäuse gelangen.

 Wenn das Aufladen der Kamera über USB nicht funktioniert,

da die Kamera über einen längeren Zeitraum nicht oder

nicht richtig verwendet wurde, laden Sie diese bitte zuerst

mit einem Netzteil auf.

DE-8

FCC Statement

Warning: Changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user’s authority

to operate the equipment.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

DE-9

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

TRADEMARK INFORMATION

® The iON logo is a registered trademark of World Wide Licenses Limited

Questions?

Need Some Help?

This manual should

help you understand

your new product.

If you still have

questions,

visit our website:

www.ioncamera.com

Like Us:

www.facebook.com/ioncamera

Tweet Us:

www.twitter.com/ioncamera

DE-10

Learn more.

Learn more about iON camera features at http://www.ioncamera.com

For instructions and safety information, see the iON User Guide.

Download the PDF at http://www.ioncamera.com/user-manuals/

Get support. (i.e. Warranty)

Visit https://www.ioncamera.com/support/ for all iON camera support.

If you are located in the United States of America, please contact

Customer Service at 855-411-4466. If you are located in Canada,

please contact Customer Service at 905-513-7733.

If you are located outside of the United States of America or Canada

please visit www.ioncamera.com for your local support service

La pagina si sta caricando...

iON SnapCam LE Manuale utente

iON SnapCam LE Manuale utente

in altre lingue

Documenti correlati

Altri documenti