Oregon Scientific OS NIGHT Manuale del proprietario

Categoria
Stazioni meteorologiche
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

Weather@Home
Bluetooth-enabled Weather Station
Model: BAR218HG
User Manual
2
EN
Weather@Home
Bluetooth-enabled Weather Station
Model: BAR218HG
User Manual
TABLE OF CONTENT
Introduction-----------------------------------------------------------------3
Overview ---------------------------------------------------------------------3
Front view ----------------------------------------------------------------3
Rear view ----------------------------------------------------------------4
Remote sensor (THGN132N
) ---------------------------------------4
Getting started -------------------------------------------------------------4
Insert batteries ----------------------------------------------------------4
Remote sensor ------------------------------------------------------------5
Sensor data transmission --------------------------------------------5
Clock------- -------------------------------------------------------------------5
Manually set clock -----------------------------------------------------5
Weather forecast ----------------------------------------------------------6
Weather warning message --------------------------------------------6
Temperature and humidity ---------------------------------------------6
Ice warning --------------------------------------------------------------7
Weather trends ---------------------------------------------------------7
Moon phase-----------------------------------------------------------------7
Backlight---------------------------------------------------------------------7
Reset----- ---------------------------------------------------------------------7
Connect with your mobile device -----------------------------------7
Pairing your weather station ----------------------------------------8
Settings -------------------------------------------------------------------8
View current readings ------------------------------------------------9
View history readings -------------------------------------------------10
Precautions -----------------------------------------------------------------10
Specications --------------------------------------------------------------11
About Oregon Scientic ------------------------------------------------12
Eu-Declaration of conformity -----------------------------------------12
FCC & IC statement ------------------------------------------------------12
Declaration of conformity --------------------------------------------13
EN
3
INTRODUCTION
Thank you for selecting our Oregon Scientic
TM
Weather@Home Bluetooth-enabled Weather Station.
In addition, it is also carried out the changeable display
between indoor and outdoor temperatures.
NOTE
Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specications and
warnings you should know about.
OVERVIEW
FRONT VIEW
1. Remote sensor reception indicator and outdoor
channel selected
2.
: Outdoor remote sensor battery low
3.
: Next 12 hour Weather forecast and
pressure trend
4.
/ / / / : weather
warning message
5. Indoor temperature reading (current/
MAX/MIN)
with temperature trend
6.
BLE connection indicator
7.
: Main unit battery low
8. Ice alert LED indicator
9.
MODE: Change settings / display
10. MEM: View current, maximum and minimum
temperature / humidity
11.
LIGHT: Activate backlight
12.
/ : Increase / decrease value of the settings;
toggle only button to select outdoor channels
(1-5); activate / deactivate pairing mode.
13.
AM/PM : Morning/afternoon
4
EN
MD/DM/Yr: Calendar / clock with weekday (hour :
minute with second display)
14.
Indoor humidity reading (current / MAX / MIN) with
humidity trend
15.
Moon phase display
16.
Outdoor humidity (current /MAX/MIN) with
humidity trend
17.
Outdoor temperature reading (current/MAX/MIN) with
temperature trend
REAR VIEW
1. °C / °F: Select temperature unit
2.
RESET: Reset the unit to default settings
3. Battery compartment
REMOTE SENSOR (THGN132N)
1
2
3
4
5
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4.
RESET hole
5.
CHANNEL switch
GETTING STARTED
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (
+/-).
3. Press
RESET after each battery change.
EN
5
LOCATION
MEANING
Clock / alarm area Main unit batteries low
Outdoor temperature area Sensor batteries low
REMOTE SENSOR
The main unit can collect data from up to 5 sensors.
To set up the sensor:
1. Open the battery compartment.
2. Select a channel then press
RESET.
3. Close the battery door.
4. Place the sensor within 98 ft (30 m) of the main unit
using the table stand or wall mount.
TIP
Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 5 ft (1.5 m) and which can shield it from
direct sunlight or wet conditions for an accurate reading.
1.5 m (5 ft)
NOTE
Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold and MODE at a time.
The sensor reception icon in the remote sensor
area shows the status:
ICON DESCRIPTION
Main unit is searching for sensor(s).
A channel has been found.
The sensor cannot be found.
TIP
The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
CLOCK
MANUALLY SET CLOCK
1. Press and hold MODE.
2. Press
or to change the settings.
3. Press
MODE to conrm.
6
EN
4. The settings order is: 12/24 hour format, hour,
minute, year, calendar format (day-month / month-
day), month, day and language.
The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).
To select display mode:
Toggle MODE to choose among clock with seconds /
weekday / calendar / moon phase.
WEATHER FORECAST
This product forecasts the next 12 hours of weather
within a 19-31 mile (30-50 km) radius.
Sunny
Partially Cloudy
Cloudy
Rainy
Snowy
WEATHER WARNING MESSAGE
The weather warning messages provide indications of
probable circumstances that may arise based on the
weather station’s calculations. The meanings for the
warnings are illustrated below:
WARNING MESSAGE
Risk of high temperatures
Risk of fast wind speeds
Risk of a storm
Risk of foggy conditions
Risk of icy conditions
TEMPERATURE AND HUMIDITY
To select temperature unit:
Select °C or °F for temperature readings by a pin
or the top of a pen.
To select an outdoor sensor’s readings:
Toggle to select your desired sensor reading.
To auto-scan among sensors:
Press and hold and MEM at a time to display
each sensor’s data for 3 seconds.
To end, press
.
To display current, minimum and maximum
records of the day from a selected sensor:
Toggle MEM.
To clear the records:
Press and hold MEM.
EN
7
ICE WARNING
If the channel 1 sensor falls from 37°F to 28°F (3°C to
-2°C), LED indicator will ash, and will stop ashing
once the temperature is out of this range.
Press and at the same time to disable the ice
alert warning.
NOTE
As ice alert is only applicable to channel 1,
to prevent ashing of LED, select channel 2-5 on
outdoor sensor.
WEATHER TRENDS
The temperature, humidity and pressure trend icons
are based on recent sensor readings.
RISE
STEADY FALL
MOON PHASE
In moon phase mode, press or to scan through
the years (2001 to 2099).
New moon Full moon
Waxing crescent Waning gibbous
First quarter Third quarter
Waxing gibbous Waning crescent
NOTE
Star icons around the moon phase will be
displayed from 6 o’clock in the evening to 6 o’clock
the next morning.
BACKLIGHT
Press LIGHT to activate backlight for 5 seconds.
RESET
Press RESET to return to the default settings.
CONNECT WITH YOUR MOBILE DEVICE
You can remotely set the
weather station and read the
weather information through
Bluetooth 4.0 using your mobile
device with the downloaded
application from the Apple Store
and the Google Play Store. To
quickly nd the application, type
‘Weather@Home’ as keyword in
the search engine.
Ensure your mobile device
is compatible with iOS 5 or
Android 4.3 with Bluetooth 4.0.
8
EN
PAIRING YOUR WEATHER STATION
First of all, you need to pair
your weather station with your
mobile device. will ash
on the screen of the weather
station while pairing and be on
after successful pairing.
Press to enable a pair-up for the main unit for 30
seconds.
1. Tap to enter SETTINGS screen
2. Tap on
STATION area.
3. Tap
Pair Up. Searching… displays. If you want to
cancel the pairing, tap Cancel.
4. Once the pairing is successful, it will return to
STATION screen.
5. Tap on each channel to rename it. (Up to 20
characters including space are allowed). Tap
if completed. Tap to exit.
To remove sensor:
To remove any sensor from the weather station, Tap
Remove Station on STATION screen, all the sensors
will be removed at the same time.
To reposition the sensors
on screen:
1. On
STATION screen, tap
.
2. Press and hold
at the
right side of a sensor. Drag
it to your desired position.
3. Tap
to conrm.
SETTINGS
You can set your weather station through the
application, such as measurement units.
The settings are as follows:
Temperature
Barometric
Rainfall (not available in BAR218HG)
EN
9
Wind speed (not available in BAR218HG)
Altitude
Show Unavailable Sensor
Automatically Sync Time
Show Sea Level Pressure
To select the measurement unit:
1. Tap
to view the measurement unit options.
2. Tap on your desired unit.
3. Tap
to go back to the previous screen.
To set altitude:
The altitude reects the distance from sea level at
your position.
1. Fill in the altitude of your main unit in the blank.
2. Tap
Done.
VIEW CURRENT READINGS
You can directly view all the weather readings
from different sensors through the application at
a time. The readings are in HOME screen.
NOTE
If low battery icon displays on
the screen, please replace the batteries for the
corresponding device.
10
EN
To show unavailable sensor:
If the sensor is out of range, the readings are
interrupted and
(dash mode) displays on the screen.
If you do not want to show the unavailable sensor:
On SETTINGS screen, touch and slide the button
to right to turn on the function, or sliding to left to
turn it off.
To automatically synchronize time:
Time and date on your weather station could be
automatically synchronized by your mobile device.
On SETTINGS screen, touch and slide the button
to right to turn on the function, or sliding to left to
turn it off.
To show sea level pressure:
After the altitude is input,
you can view the sea level
pressure on the HOME screen.
On SETTINGS screen,
touch and slide the button
to right to turn on the
function, or sliding to left to turn it off.
NOTE
When altitude is set to 0 meter, the pressure
reading is the local pressure. If the altitude is set to
the current location, the new pressure reading will be
displayed as a sea level pressure.
VIEW HISTORY READINGS
You can view history through the application. The
history could also be presented in graphs (past 24
hours or past 7 days).
To view the history:
1. Tap on your desired sensor area on the screen.
2. Tap
to select your desired data or tap
to sort the data by date.
PRECAUTIONS
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
EN
11
Do not clean the unit with abrasive or
corrosive materials.
Do not tamper with the unit’s internal components.
This invalidates the warranty.
Only use fresh batteries. Do not mix new and
old batteries.
Images shown in this manual may differ from the
actual display.
When disposing of this product, ensure it is
collected separately for special treatment and not
as household waste.
Placement of this product on certain types of
wood may result in damage to its nish for which
Oregon Scientic will not be responsible. Consult
the furniture manufacturer's care instructions
for information.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
Please note that some units are equipped with
a battery safety strip. Remove the strip from the
battery compartment before rst use.
NOTE
The technical specications for this product
and the contents of the user manual are subject to
change without notice.
NOTE
Features and accessories will not be available
in all countries. For more information, please contact
your local retailer.
SPECIFICATIONS
TYPE DESCRIPTION
MAIN UNIT
L x W x H
7.32 x3.7 x 2.13 in
186 x 94 x 54 mm
Weight 223 g without battery
Temperature range -5°C to 50°C (23°F to 122°F)
Signal frequency 433 MHz
Humidity range 25% - 95%
Power 3 x UM-3 (AA) 1.5V batteries
Temperature range 3°C to -2°C
REMOTE UNIT (THGN132N)
L x W x H
50 x 22 x 96 mm
(1.97 x 0.87 x 3.78 in)
Weight 62 g (2.22 ounces) without battery
Transmission range 98 ft (30 m) unobstructed
Temperature range -20°C to 60°C (-4°F to 140°F)
Humidity range 25% - 95%
Power 1 x UM-3 (AA) 1.5 V battery
12
EN
ABOUT OREGON SCIENTIFIC
Visit our website www.oregonscientic.com to learn
more about Oregon Scientic products.
For any enquiry, please contact our Customer
Services at info@oregonscientic.com.
Oregon Scientic Global Distribution Limited reserves
the right to interpret and construe any contents, terms
and provisions in this user manual and to amend it, at
its sole discretion at any time without prior notice. To
the extent that there is any inconsistency between the
English version and any other language versions, the
English version shall prevail.
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientic, declares that Weather@
Home Bluetooth-enabled Weather Station (model:
BAR218HG) is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/05/EC. A copy of the signed and dated
Declaration of Conformity is available on request via
our Oregon Scientic Customer Service.
COUNTRIES RTTE APPROVED COMPLIED
All EU countries, Switzerland CH
and Norway N
FCC & IC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
WARNING
Changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
EN
13
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact
for support or sales. Please call our customer service
number (listed on our website at
www.oregonscientic.com), or on the warranty card
for this product) for all inquiries instead.
We
Name: Oregon Scientic, Inc.
Address: 10778 SW Manhasset Drive,
Tualatin, OR 97062,USA
Telephone No.: 1-800-853-8883
Declare that the product
Product No.: Model: BAR218HG
Product Name: Weather@Home
Bluetooth-enabled Weather
Station
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate,
Phase 1,41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong.
1





Manuale utente



Vista anteriore ----------------------------------------------------------2
Vista posteriore ---------------------------------------------------------3
Sensore remoto --------------------------------------------------------3

Inserire le batterie -----------------------------------------------------4

Trasmissione dati del sensore --------------------------------------5

Impostazione manuale dell’orologio ------------------------------5



Allarme gelo -------------------------------------------------------------6
Tendenze atmosferiche ----------------------------------------------6




Sincronizzazione della vostra Stazione meteo -----------------7
Impostazioni -------------------------------------------------------------8
Visualizzazione dei dati attuali -------------------------------------9
Visualizzazione dello storico dei dati -----------------------------10





2

Grazie per aver scelto il nostro Oregon Scientic
Weather@Home Stazione meteorologica con
connessione Bluetooth e indicazione della temperatura
interna ed esterna.
NOTA
Si consiglia di tenere questo manuale a
portata di mano durante l’utilizzo del prodotto. Il
manuale contiene pratiche istruzioni dettagliate, dati
tecnici e avvertenze che è necessario conoscere.


1. Indicatore ricezione sensore remoto e canale
esterno selezionato
2.
: batteria scarica del sensore remoto esterno
3.
: Previsioni meteorologiche per le prossime
12 ore e tendenza pressione
4.
/ / / / : messaggio
avviso meteo
5. Visualizzazione temperatura interna (corrente/
/) con andamento temperature
6.
Indicatore connessione Bluetooth
7.
: batteria scarica unità principale
8. Indicatore LED per allarme ghiaccio
9. (MODALITÀ): modica impostazioni /
visualizzazione
10. : visualizzazione valori attuali, massimi e minimi
di temperatura / umidità
3

11.  (LUCE): attivazione retroilluminazione
12.
/ : aumento / diminuzione valore delle
impostazioni; selezionare canali esterni (1-5);
attivazione / disattivazione  (MODALITÀ) di
accoppiamento.
13. /: mattina/pomeriggio.
 /  / : calendario / orologio
con giorno della settimana (ora: minuti con
visualizzazione secondi)
14. Visualizzazione umidità interna (valori attuali//
) con andamento umidità
15. Visualizzazione fase lunare
16. Visualizzazione umidità esterna (valori attuali//
) con andamento umidità
17. Visualizzazione temperatura esterna (corrente/
/) con andamento temperatura

1.  / : selezionare unità di misura temperatura
2.  (RIPRISTINO): ripristino dell’unità alle
impostazioni di default
3. Compartimento batterie

1
2
3
4
5

4
1. Indicatore LED di stato
2. Foro di montaggio a parete
3. Compartimento batterie
4. Foro per  (RIPRISTINO)
5. Interruttore di  (CANALE)


1. Rimuovere il compartimento batterie.
2. Inserire le batterie, rispettando le polarità ().
3. Premere  (RIPRISTINO) dopo ogni
sostituzione di batterie


Area orologio / sveglia
Batterie scariche unità
principale
Area temperatura esterna
Batterie sensore
scariche

L’unità principale può raccogliere dati da no a 5
sensori.

1. Aprire il compartimento batterie.
2. Selezionare un canale quindi premere 
(RIPRISTINO).
3. Chiudere il coperchio delle batterie.
4. Mettere il sensore entro 98 piedi (30 m) dall’unità
principale usando il supporto da tavolo oppure il
montaggio a parete.
TIP
La posizione ideale per il sensore sarebbe
qualsiasi posizione all’esterno della casa ad un’altezza
non superiore a 5 piedi (1.5 m) ed al riparo dalla luce
solare diretta o dall’umidità per una lettura accurata.
1.5 m (5 ft)
NOTA
Usare batterie alcaline per un funzionamento più
lungo e batterie al litio d’uso comune per temperature al disotto
del punto di congelamento.
5



Premere e tener premuto
e  (MODALITÀ)
contemporaneamente.


 
L’uni principale sta cercando i(l)
sensore(i).
È stato trovato un canale.
Non si trova il sensore.
TIP
La portata di trasmissione può variare in
dipendenza di molti fattori. Potreste dover provare con
diverse posizioni per ottenere i risultati migliori.


1. Premere e tener premuto  (MODALITÀ).
2. Premere
oppure per cambiare le impostazioni.
3. Premere  (MODALITÀ) per confermare.
4. L’ordine delle impostazioni è: formato ora 12/24,
ora, minuti, anno, formato calendario (giorno-mese
/ mese-giorno), mese, giorno e lingua.
Le opzioni della lingua sono Inglese (), Tedesco (),
Francese (), Italiano (), e Spagnolo ().
 (MODALITÀ)

Azionare  (MODALITÀ) per scegliere tra
orologio con secondi / giorno della settimana /
calendario / fase lunare.

Questo prodotto fornisce le previsioni del tempo per
le successive 12 ore, entro un raggio di 19-31 miglia
(30-50 km).
Soleggiato
Parzialmente nuvoloso
Nuvoloso
Piovoso
Nevoso

I messaggi di avviso meteo forniscono indicazioni di
probabili circostanze che possono sorgere sulla base
dei calcoli della stazione meteo. I signicati degli
avvisi sono illustrati di seguito:

6
 
Rischio di alte temperature
Rischio di venti ad alta velocità
Rischio di una tempesta
Rischio di nebbia
Rischio di ghiaccio


Selezionare  oppure  per lettura temperature
usando uno spillo o la punta di una penna.

Azionare
per selezionare la lettura del sensore
desiderato.

Premere e tener premuto
e 
contemporaneamente per visualizzare i dati di ogni
sensore per 3 secondi.
Per terminare premere
.


Azionare .

Premere e tener premuto .

Se il sensore del canale 1 scende da 37°F a 28°F (da
3°C a -2°C), l’indicatore LED lampeggerà; l’indicatore
smetterà di lampeggiare una volta che la temperatura
esce da quell’intervallo.
Premere contemporaneamente
e per
disarmare l’avviso di allarme ghiaccio.
NOTA
Poiché l’allarme ghiaccio si applica solo al
canale 1, per impedire il lampeggiamento del LED,
selezionare il canale 2 o 5 per un sensore esterno.

Le icone delle tendenze della temperatura, umidità
e pressione sono basate sulle letture recenti del
sensore.

 

Selezionare  (Modalità) no ad accedere alla
funzione FASE LUNARE; premere oppure per
scorrere velocemente gli anni (dal 2001 al 2099).
7

Luna nuova Luna piena
Falce di luna
crescente
Luna gibbosa
calante
Primo quarto Ultimo quarto
Luna gibbosa
crescente
Falce di luna
calante
NOTA
Le icone delle stelle intorno alla fase lunare saranno
visualizzate dalle 6 della sera alle 6 del mattino successivo.

Premere (LUCE) per attivare la
retroilluminazione per 5 secondi.

Premere  (RIPRISTINO) per ritornare alle
impostazioni di default.


Potete impostare da remoto la vostra stazione meteo
e leggere le informazioni sul tempo via Bluetooth
4.0 usando il vostro dispositivo mobile e scaricando
l’applicazione da Apple Store e Google Play Store.
Per trovare rapidamente l’applicazione scrivete
‘Weather@Home’ come parola
chiave nel motore di ricerca.
Assicuratevi che il vostro
dispositivo mobile sia
compatibile con iOS 5 oppure
Android 4.3 con Bluetooth 4.0.


Prima di tutto dovete
sincronizzare la vostra
stazione meteo con il vostro
dispositivo mobile. Il simbolo
lampeggerà sullo schermo
della stazione meteo mentre
la sincronizzazione è in corso
e resterà acceso dopo che la
sincronizzazione è terminata.
Premere per 30 secondi al ne di effettuare la
sincronizzazione con l'unità principale.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

Oregon Scientific OS NIGHT Manuale del proprietario

Categoria
Stazioni meteorologiche
Tipo
Manuale del proprietario
Questo manuale è adatto anche per