HP (Hewlett-Packard) Server 648375-001 Manuale utente

Categoria
Server
Tipo
Manuale utente

Questo manuale è adatto anche per

HP ProLiant ML350e Gen8 Server
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 679349-003
January 2013
Edition: 3
© Copyright 2012-2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Contents 3
Contents
Component identification ............................................................................................................... 7
Front panel components ............................................................................................................................. 7
Front panel LEDs and buttons ............................................................................................................ 8
Rear panel components .............................................................................................................................. 9
Rear panel LEDs ............................................................................................................................ 10
System board components ........................................................................................................................ 11
System maintenance switch ............................................................................................................. 12
System board LEDs ........................................................................................................................ 13
NMI header .................................................................................................................................. 13
DIMM slot locations ....................................................................................................................... 14
Smart Array SAS RAID controller card components ...................................................................................... 14
SAS and SATA device numbers ................................................................................................................. 15
SAS and SATA drive LED combinations ...................................................................................................... 16
FBWC module LED definitions ................................................................................................................... 17
P222, P420, P421, and P822 modules ........................................................................................... 17
B120i module ............................................................................................................................... 18
Drive LED definitions ................................................................................................................................ 19
Fan locations .......................................................................................................................................... 20
Redundant power supply backplane connectors .......................................................................................... 20
T-10/T-15 Torx screwdriver ...................................................................................................................... 21
Operations ................................................................................................................................. 22
Power up the server ................................................................................................................................. 22
Power down the server ............................................................................................................................. 22
Remove the tower bezel ........................................................................................................................... 22
Install the tower bezel .............................................................................................................................. 23
Remove the security bezel ........................................................................................................................ 24
Remove the rack bezel ............................................................................................................................. 24
Install the rack bezel ................................................................................................................................ 25
Remove the access panel.......................................................................................................................... 25
Install the access panel............................................................................................................................. 26
Extend the server from the rack ................................................................................................................. 27
Remove the PCI air baffle ......................................................................................................................... 28
Install the PCI air baffle ............................................................................................................................ 29
Remove the system air baffle ..................................................................................................................... 30
Install the system air baffle ........................................................................................................................ 30
Remove the fan cage ............................................................................................................................... 31
Remove a fan ......................................................................................................................................... 33
Remove the FBWC capacitor pack ............................................................................................................ 33
Remove the DVD drive ............................................................................................................................. 35
Remove a component drive cage blank ...................................................................................................... 36
Remove a full-length expansion board ........................................................................................................ 37
Setup ......................................................................................................................................... 39
Optional installation services .................................................................................................................... 39
Rack planning resources........................................................................................................................... 39
Optimum environment .............................................................................................................................. 39
Contents 4
Space and airflow requirements ...................................................................................................... 40
Temperature requirements ............................................................................................................... 40
Power requirements ....................................................................................................................... 41
Electrical grounding requirements .................................................................................................... 41
Rack warnings ........................................................................................................................................ 41
Server warnings and cautions ................................................................................................................... 42
Identifying tower server shipping carton contents ......................................................................................... 43
Installing hardware options ....................................................................................................................... 43
Setting up a tower server .......................................................................................................................... 43
Installing the server into the rack ................................................................................................................ 44
Powering up and configuring the server ..................................................................................................... 45
Installing the operating system................................................................................................................... 45
Registering the server ............................................................................................................................... 46
Hardware options installation ....................................................................................................... 47
Introduction ............................................................................................................................................ 47
Security bezel option ............................................................................................................................... 47
Second processor option .......................................................................................................................... 47
Memory options ...................................................................................................................................... 54
HP SmartMemory .......................................................................................................................... 54
Memory subsystem architecture ....................................................................................................... 55
Single-rank, dual-rank, and quad-rank DIMMs ................................................................................... 55
DIMM identification ....................................................................................................................... 56
Memory configurations ............................................................................................................................ 57
General DIMM slot population guidelines ................................................................................................... 57
Advanced ECC memory configuration .............................................................................................. 58
Online Spare memory configuration ................................................................................................ 58
Lockstep memory configuration ........................................................................................................ 58
Advanced ECC population guidelines .............................................................................................. 58
Online spare population ................................................................................................................. 58
Lockstep Memory population guidelines ........................................................................................... 59
Population order ............................................................................................................................ 59
Installing a DIMM .................................................................................................................................... 59
SAS drive options .................................................................................................................................... 60
Installing a hot-plug drive option ...................................................................................................... 60
Installing a non-hot-plug drive .......................................................................................................... 61
Optical drive cage option ........................................................................................................................ 64
Optical drive option ................................................................................................................................ 66
Installing a storage controller .................................................................................................................... 70
FBWC options ........................................................................................................................................ 72
Installing the FBWC module (P222, P420, P421, and P822) .............................................................. 73
Installing the B120i cache module ................................................................................................... 75
Installing an expansion board ................................................................................................................... 77
Eight-bay SFF drive cage option ................................................................................................................ 78
Installing the optional SFF hot-plug drive cage ................................................................................... 78
Six-bay LFF drive cage ............................................................................................................................. 81
Installing the optional LFF hot-plug drive cage .................................................................................... 82
Redundant Enablement Option .................................................................................................................. 85
Preparing the server for installation .................................................................................................. 85
Installing the RPS Enablement Kit ..................................................................................................... 87
Redundant power supply module ............................................................................................................... 92
Installing the LFF 5/6 drive cable option ..................................................................................................... 93
Tower-to-rack conversion option ................................................................................................................ 97
HP Trusted Platform Module option .......................................................................................................... 102
Contents 5
Installing the Trusted Platform Module board ................................................................................... 103
Retaining the recovery key/password ............................................................................................ 105
Enabling the Trusted Platform Module ............................................................................................. 105
Cabling ................................................................................................................................... 106
Storage cabling .................................................................................................................................... 106
Non-hot-plug four LFF drive cabling ................................................................................................ 106
Hot-plug four LFF drive cabling ...................................................................................................... 107
Hot-plug eight SFF drive cabling .................................................................................................... 107
Smart Array controller card cabling ......................................................................................................... 108
5/6 LFF Smart Array controller card cabling ................................................................................... 108
Power cabling....................................................................................................................................... 109
ATX power cabling ...................................................................................................................... 109
RPS power cabling ...................................................................................................................... 110
Media device data cabling ..................................................................................................................... 111
DVD-ROM and DVD-RW drive power cabling ................................................................................. 111
Software and configuration utilities ............................................................................................. 112
Server mode ......................................................................................................................................... 112
HP product QuickSpecs .......................................................................................................................... 112
HP iLO Management Engine ................................................................................................................... 112
HP iLO ....................................................................................................................................... 112
Intelligent Provisioning .................................................................................................................. 114
HP Insight Remote Support software ............................................................................................... 116
Scripting Toolkit .......................................................................................................................... 116
HP Service Pack for ProLiant ................................................................................................................... 116
HP Smart Update Manager ........................................................................................................... 117
HP ROM-Based Setup Utility ................................................................................................................... 117
Using RBSU ................................................................................................................................ 118
Auto-configuration process ............................................................................................................ 118
Boot options ............................................................................................................................... 119
Configuring AMP modes .............................................................................................................. 119
Re-entering the server serial number and product ID ......................................................................... 119
Utilities and features .............................................................................................................................. 120
Array Configuration Utility ............................................................................................................ 120
Option ROM Configuration for Arrays ........................................................................................... 121
ROMPaq utility ............................................................................................................................ 121
Automatic Server Recovery ........................................................................................................... 121
USB support ................................................................................................................................ 121
Redundant ROM support .............................................................................................................. 122
Keeping the system current ..................................................................................................................... 122
Drivers ....................................................................................................................................... 122
Software and firmware ................................................................................................................. 123
Version control ............................................................................................................................ 123
HP operating systems and virtualization software support for ProLiant servers ...................................... 123
Change control and proactive notification ...................................................................................... 123
Troubleshooting ........................................................................................................................ 124
Troubleshooting resources ...................................................................................................................... 124
Battery replacement .................................................................................................................. 125
Regulatory information .............................................................................................................. 127
Safety and regulatory compliance ........................................................................................................... 127
Turkey RoHS material content declaration ................................................................................................. 127
Contents 6
Ukraine RoHS material content declaration ............................................................................................... 127
Warranty information ............................................................................................................................ 127
Electrostatic discharge ............................................................................................................... 128
Preventing electrostatic discharge ............................................................................................................ 128
Grounding methods to prevent electrostatic discharge ................................................................................ 128
Specifications ........................................................................................................................... 129
Environmental specifications ................................................................................................................... 129
Server specifications .............................................................................................................................. 129
Power supply specifications .................................................................................................................... 129
Hot-plug power supply calculations .......................................................................................................... 132
Support and other resources ...................................................................................................... 133
Before you contact HP ............................................................................................................................ 133
HP contact information ........................................................................................................................... 133
Customer Self Repair ............................................................................................................................. 133
Acronyms and abbreviations ...................................................................................................... 141
Documentation feedback ........................................................................................................... 144
Index ....................................................................................................................................... 145
Component identification 7
Component identification
Front panel components
SFF
Item Description
1
Media/drive cage bay (boxes 2 and 3)
2
SAS/SATA drives (8)
3
Serial number/iLO information pull tab*
4
Optical drive
5
USB connectors (4)
*The serial number/iLO information pull tab is double-sided. The top side shows the server serial number, and the reverse
shows the default iLO account information. The same information is printed on a label attached to the chassis.
Component identification 8
LFF
Item Description
1
Media/drive cage bay (boxes 2 and 3)
2
SAS/SATA drives (6)
3
Serial number/iLO information pull tab*
4
Optical drive
5
USB connectors (4)
*The serial number/iLO information pull tab is double-sided. The top side shows the server serial number, and the reverse
shows the default iLO account information. The same information is printed on a label attached to the chassis.
Front panel LEDs and buttons
Item Description Status
1
Power On/Standby button Solid green = System on
Component identification 9
Item Description Status
and system power LED Flashing green (1 Hz/cycle per sec) = Performing power on sequence
Solid amber = System in standby
Off = No power present*
2
NIC status LED Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
3
Health LED Solid green = Normal
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Fast-flashing red (4 Hz/cycles per sec) = Power fault**
4
UID button/LED Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote management or
firmware upgrade in progress
Off = Deactivated
*Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.
**To identify components in a degraded or critical state, see the Systems Insight Display LEDs, check iLO/BIOS logs, and
reference the server troubleshooting guide.
Rear panel components
Item Description
1
USB connectors (4)
2
iLO connector
3
Video connector
4
Serial connector
5
NIC connector 2
6
NIC connector 1
7
UID button/LED
8
ATX power supply
Component identification 10
Item Description
9
PCIe slot 6 (Processor 1)
10
PCIe slot 5 (Processor 1)
11
PCIe slot 4 (Processor 2)
12
PCIe slot 3 (Processor 2)
13
PCIe slot 2 (Processor 1)
14
PCIe slot 1 (Processor 1)
15
Redundant power supply 1
16
Redundant power supply 2
Rear panel LEDs
Item Description Status
1
UID LED button Blue = Activated
Flashing blue = System is being managed remotely
Off = Deactivated
2
NIC link LED Green = Network link
Off = No network link
3
NIC activity LED Green = Network activity
Flashing green = Network activity
Off = No network activity
Component identification 11
System board components
Item Description
1
Slot 6 PCIe2 x4 (1)
2
Slot 5 PCIe2 x8 (4,1)
3
Slot 4 PCIe3 x16 (8,4,1)
4
System maintenance switch
5
Slot 3 PCIe3 x16 (16,8,4,1)
6
Slot 2 PCIe3 x16 (16,8,4,1)
7
Slot 1 PCIe3 x8 (4,1)
8
Processor 2 DIMM slots
9
System battery
10
Processor socket 2
11
Power connector
12
Processor socket 1 (populated)
13
Fan connector 4
14
Internal USB connector
15
Fan connector 3
16
Processor 1 DIMM slots
17
Box 3 power good connector
18
SD card connector
19
Internal USB tape drive connector
20
Discovery service cable connector
21
Power connector
22
Box 2 power good connector
23
SATA connector 2
24
SATA connector 1
25
Box 1 power good connector
26
Mini-SAS connector
27
Power connector
Component identification 12
Item Description
28
Fan connector 2
29
Front panel connector
30
Front panel connector
31
Fan connector 1
32
External thermal cable connector
33
Redundant power supply connector
34
Cache module connector
35
TPM connector
36
NMI header
System maintenance switch
The system maintenance switch (SW2) is a twelve-position switch that is used for system configuration.
Position Description Function
S1
iLO security
override
Off = No function.
On = Override enabled.
S2
Configuration
lock
Off = System configuration can be
changed.
On = System configuration is locked.
S5
Password disable Off = Power-on password enabled.
On = Power-on password disabled.
S6
Reset
configuration
Off = No function
On = ROM reads the system
configuration as invalid.
S3, S4,
S7-S12
Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
Component identification 13
System board LEDs
Item LED description Status
1
Power supply failure Red = Power supply failed
Off = Normal
NMI header
The NMI header enables administrators to perform a memory dump before performing a hard reset. Crash
dump analysis is an essential part of eliminating reliability issues, such as hangs or crashes in operating
systems, device drivers, and applications. Many crashes can freeze a system, requiring you to perform a
hard reset. Resetting the system erases any information that supports root cause analysis.
When a Windows® operating system crashes, a blue-screen trap appears. When this trap appears,
Microsoft® recommends that system administrators perform an NMI event by temporarily shorting the NMI
header with a jumper. The NMI event enables a hung system to become responsive again.
For additional information, see the HP website
(http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00797875/c00797875.pdf).
Component identification 14
DIMM slot locations
DIMM slots are numbered sequentially (1 through 6) for each processor. The supported AMP modes use the
letter assignments for population guidelines.
Smart Array SAS RAID controller card components
Item Description
1
Expansion board connector
2
Mini-SAS cable connector
3
Mini-SAS cable connector
4
Cache module connector
Component identification 15
SAS and SATA device numbers
With optional drive cages installed, the server supports up to 24 SFF drives or up to 18 LFF drives. The server
does not support mixing SFF and LFF drives.
HP recommends that you populate drive bays starting with the lowest SAS or SATA device number. Drives
are numbered from left to right in each component box. Component boxes are numbered 1 through 3, from
bottom to top.
SFF drives
LFF drives
Component identification 16
SAS and SATA drive LED combinations
Online/activity
LED (green)
Fault/UID LED
(amber/blue)
Interpretation
On, off, or
flashing
Alternating amber and
blue
The drive has failed, or a predictive failure alert has been
received for this drive. The drive also has been selected by a
management application.
On, off, or
flashing
Steadily blue The drive is operating normally, and it has been selected by a
management application.
On
Amber, flashing
regularly (1 Hz)
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
On
Off The drive is online, but it is not active currently.
Flashing regularly
(1 Hz)
Amber, flashing
regularly (1 Hz)
The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has
been received for this drive. To minimize the risk of data loss, do
not replace the drive until the expansion or migration is
complete.*
Flashing regularly
(1 Hz)
Off The drive is rebuilding, or it is part of an array that is undergoing
capacity expansion or stripe migration.*
Flashing
irregularly
Amber, flashing
regularly (1 Hz)
The drive is active, but a predictive failure alert has been received
for this drive. Replace the drive as soon as possible.
Flashing
irregularly
Off The drive is active, and it is operating normally.
Off
Steadily amber A critical fault condition has been identified for this drive, and the
controller has placed it offline. Replace the drive as soon as
possible.
Off
Amber, flashing
regularly (1 Hz)
A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.
Off
Off The drive is offline, a spare, or not configured as part of an array.
* Do not remove the drive. Removing a drive might terminate the current operation and cause data loss.
Component identification 17
FBWC module LED definitions
P222, P420, P421, and P822 modules
The FBWC module has three LEDs (one amber and two green). The LEDs are duplicated on the reverse side
of the FBWC module to facilitate status viewing.
1 - Amber 2 - Green 3 - Green Interpretation
Off
Off Off The FBWC module is not powered.
Off
Flashing 0.5 Hz Flashing 0.5 Hz The FBWC microcontroller is executing from within its
boot loader and receiving new flash code from the host
controller.
Off
Flashing 1 Hz Flashing 1 Hz The FBWC module is powering up, and the capacitor
pack is charging.
Off
Off Flashing 1 Hz The FBWC module is idle, and the capacitor pack is
charging.
Off
Off On The FBWC module is idle, and the capacitor pack is
charged.
Off
On On The FBWC module is idle, the capacitor pack is
charged, and the cache contains data that has not yet
been written to the drives.
Off
Flashing 1 Hz Off A backup is in progress.
Off
On Off The current backup is complete with no errors.
Flashing 1 Hz
Flashing 1 Hz Off The current backup failed, and data has been lost.
Flashing 1 Hz
A power error occurred during the previous or current
boot. Data might be corrupt.
Flashing 1 Hz
On Off An overtemperature condition exists.
Flashing 2 Hz
Flashing 2 Hz Off The capacitor pack is not attached.
Flashing 2 Hz
Flashing 2 Hz On The capacitor has been charging for 10 minutes, but
has not reached sufficient charge to perform a full
backup.
On
On Off The current backup is complete, but power fluctuations
occurred during the backup.
On
On On The cache module microcontroller has failed.
Component identification 18
B120i module
The FBWC module has three LEDs (one amber and two green).
1 - Amber 2 - Green 3 - Green Interpretation
Off
Off Off The FBWC module is not powered.
Off
Flashing 0.5 Hz Flashing 0.5 Hz The FBWC microcontroller is executing from within its
boot loader and receiving new flash code from the host
controller.
Off
Flashing 1 Hz Flashing 1 Hz The FBWC module is powering up, and the capacitor
pack is charging.
Off
The FBWC module is idle, and the capacitor pack is
charging.
Off
Off On The FBWC module is idle, and the capacitor pack is
charged.
Off
On On The FBWC module is idle, the capacitor pack is
charged, and the cache contains data that has not yet
been written to the drives.
Off
Flashing 1 Hz Off A backup is in progress.
Off
On Off The current backup is complete with no errors.
Flashing 1 Hz
Flashing 1 Hz Off The current backup failed, and data has been lost.
Flashing 1 Hz
Flashing 1 Hz On A power error occurred during the previous or current
boot. Data might be corrupt.
Flashing 1 Hz
On Off An overtemperature condition exists.
Flashing 2 Hz
Flashing 2 Hz Off The capacitor pack is not attached.
Flashing 2 Hz
Flashing 2 Hz On The capacitor has been charging for 10 minutes, but
has not reached sufficient charge to perform a full
backup.
On
On Off The current backup is complete, but power fluctuations
occurred during the backup.
On
On On The FBWC module microcontroller has failed.
Component identification 19
Drive LED definitions
Item LED Status Definition
1
Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
2
Activity ring Rotating green Drive activity
Off No drive activity
3
Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
4
Drive status Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration, stripe size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green
The drive is a member of one or more logical drives and predicts
the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
Component identification 20
Fan locations
Item Description Configuration
1
Fan 1 Optional
2
Fan 2 Primary
3
Fan 3 Primary
4
Fan 4 Optional
Redundant power supply backplane connectors
Item Description Connector
identifier
1
Drive bay 2 drive backplane connector P5H
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147

HP (Hewlett-Packard) Server 648375-001 Manuale utente

Categoria
Server
Tipo
Manuale utente
Questo manuale è adatto anche per