Lenovo ThinkVision E500 Safety Information Manual

Safety information

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

E500 PROJECTO R

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

vi E500 PROJECTOR

General safety guidelines

Always observe the following precautions to reduce the risk of injury and property damage.

Service

Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center. Use only a

service provider who is approved to repair your particular product.

Note: Some parts can be upgraded or replaced by the customer. These parts are referred to as Customer Replaceable

Units, or CRUs. Lenovo expressly identifies CRUs as such, and provides documentation with instructions when it is

appropriate for customers to replace those parts. You must closely follow all instructions when performing such

replacements. Always make sure that the power is turned off and that the product is unplugged from any power source

before you attempt the replacement. If you have any questions or concerns, contact the Customer Support Center.

Power cords and power adapters

Use only the power cords and power adapters supplied by the product manufacturer.

Never wrap a power cord around the power adapter or other object. Doing so can stress the cord in ways that can cause

the cord to fray, crack or crimp. This can present a safety hazard.

Always route power cords so that they will not be walked on, tripped over, or pinched by objects.

Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter near sinks, tubs,

toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the cord or

power adapter has been stressed by misuse. Liquids can also cause gradual corrosion of the power cord terminals and/or

the connector terminals on the adapter which can eventually result in overheating.

Always connect power cords and signal cables in the correct order and ensure that all power cord connectors are securely

and completely plugged into receptacles.

Do not use any power adapter that shows corrosion at the ac input pins and/or shows signs of overheating (such as

deformed plastic) at the ac input or anywhere on the power adapter.

Do not use any power cords where the electrical contacts on either end show signs of corrosion or overheating or where

the power cord appears to have been damaged in any way.

Extension cords and related devices

Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to

handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should

not exceed the power strip input rating. Consult an electrician for more information if you have questions about power

loads, power requirements, and input ratings.

Plugs and outlets

If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded,

do not use the outlet until it is replaced by a qualified electrician.

Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement.

Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical outlet. This is a

safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded outlet. If you cannot insert the

plug into the outlet, contact an electrician for an approved outlet adapter or to replace the outlet with one that enables

this safety feature. Never overload an electrical outlet. The overall system load should not exceed 80 percent of the

branch circuit rating. Consult an electrician for more information if you have questions about power loads and branch

circuit ratings.

Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the equipment. Do

not fully extend power cords in a way that will stress the cords.

Connect and disconnect the equipment from the electrical outlet carefully

viii E500 PROJECTOR

Batteries

All personal computers manufactured by Lenovo contain a non-rechargeable coin cell battery to provide power to the

system clock. In addition many mobile products such as ThinkPad notebook PCs utilize a rechargeable battery pack to

provide system power when in portable mode. Batteries supplied by Lenovo for use with your product have been tested

for compatibility and should only be replaced with Lenovo approved parts.

Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or short circuit the metal

contacts. Do not expose the battery to water or other liquids. Only recharge the battery pack strictly according to

instructions included in the product documentation.

Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to “vent” from the

battery pack or coin cell. If your battery is damaged, or if you notice any discharge from your battery or the buildup of

foreign materials on the battery leads, stop using the battery and obtain a replacement from the battery manufacturer.

Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries (particularly

Lithium Ion batteries), leaving a battery unused in a discharged state could increase the risk of a battery short circuit,

which could shorten the life of the battery and can also pose a safety hazard. Do not let rechargeable Lithium-Ion

batteries completely discharge or store these batteries in a discharged state.

Heat and product ventilation

Computers generate heat when turned on and when batteries are charging. Notebook PCs can generate a significant

amount of heat due to their compact size. Always follow these basic precautions:

v Do not leave the base of your computer in contact with your lap or any part of your body for an extended period

when the computer is functioning or when the battery is charging. Your computer produces some heat during normal

operation. Extended contact with the body could cause discomfort or, potentially, a skin burn.

v Do not operate your computer or charge the battery near flammable materials or in explosive environments.

v Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation.

These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible

surface. Never block, cover or disable these features.

General safety guidelines ix

CD and DVD drive safety

CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or otherwise physically damaged, it is

possible for the disc to break apart or even shatter when the CD drive is in use. To protect against possible injury due to

this situation, and to reduce the risk of damage to your machine, do the following:

v Always store CD/DVD discs in their original packaging

v Always store CD/DVD discs out of direct sunlight and away from direct heat sources

v Remove CD/DVD discs from the computer when not in use

v Do not bend or flex CD/DVD discs, or force them into the computer or their packaging

v Check CD/DVD discs for cracks before each use. Do not use cracked or damaged discs

x E500 PROJECTOR

Encerramento

Consulte o Guia do Usuário

para obter os procedimentos

apropriados de encerramento.

Para obter contatos, informações detalhadas e resoluções de problemas, consulte o Guia do Usuário no CD-ROM.

Para computadores ThinkPad,

pressione FN + F7. Para compu-

tadores de outros fabricantes,

consulte a documentação que

acompanha o computador.

Remova o protetor de lente

Ajuste o zoom e o foco

Conecte o cabo do computador

aquecimento

Ajuste o enquadramento

Conecte o cabo de alimentação

Ajuste a altura

Existe uma imagem?

Ligue o projetor em

Inicialize

Zoom

Foco

Cabo do computador

Vypnutí

Postup pro správné vypnutí

naleznete v uživatelské příručce.

V uživatelské příručce na CD naleznete kontakty, podrobné informace

a pokyny pro odstraňování závad.

Na počítačích ThinkPad

stiskněte Fn + F7. Správnou

kombinaci kláves pro pro jiné

počítače najdete v dokumentaci

dodané s těmito počítači.

Odstranění krytu objektivu

Zaostření a transfokátor

Připojení počítačového kabelu

zahřátí

Úprava zkreslení

Připojení napájecího kabelu

Nastavení výšky

Promítá se obraz?

Zapnutí projektoru

Spuštění

Transfokátor

Ostření

Počítačový kabel

Выключение

Информацию о том, как

выключить проектор, смотрите

в Руководстве пользователя

Подробное описание, информацию о контактах и по устранению неисправностей

смотрите в Руководстве пользователя на компактдиске.

На компьютере

нажмите Если вы

работаете на другом

компьютере, то просмотрите

документацию к компьютеру.

ThinkPad

FN + F7.

Снимите крышку объектива

Настройте масштаб и

фокусировку

Подключите кабель

компьютера

прогрев

Устраните искажение

типа "Трапеция"

Вставьте шнур питания

в розетку

Настройте высоту

Есть изображение?

Включите проектор

Включите компьютер

Масштаб

Фокус

Кабель компьютера

La pagina sta caricando ...

Lenovo ThinkVision E500 Safety Information Manual

Lenovo ThinkVision E500 Safety Information Manual

in altre lingue

Documenti correlati

Altri documenti