Bauknecht SXBBE 930 WD 2 Guida utente

Gebrauchsanweisung

Instructions for use

Mode d’emploi

Gebruiksaanwijzing

Istruzioni per l’uso

Brugsanvisning

Bruksanvisning

Käyttöohje

Manual de utilização

Instrucciones para el uso

Οδηγίες χρήσης

Instrukcje użytkowania

Használati utasítás

Инструкция за употреба

Қолдану бойынша нұсқаулық

Návod k použití

Návod na použitie

Instrucțiuni de utilizare

Инструкции по эксплуатации

Інструкція з експлуатації

ENGLISH Instructions for use Page 4

DEUTSCH Gebrauchsanweisung Seite 28

ESPAÑOL Instrucciones para el uso Página 52

ITALIANO Istruzioni per l’uso Pagina 76

ČESKY Návod k použití Strana 100

4

SAFETY INSTRUCTIONS

IMPORTANT to be read and observed

Before using the appliance, read

these safety instructions. Keep them

nearby for future reference.

These instructions and the appliance

itself provide important safety

warnings, to be observed at all times.

The manufacturer declines any

liability for failure to observe these

safety instructions, for inappropriate

use of the appliance or incorrect

setting of controls.

Very young children (0-3 years)

should be kept away from the

appliance. Young children (3-8

years) should be kept away from

the appliance unless continuously

supervised. Children from 8 years

old and above and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge can use this appliance

only if they are supervised or have

been given instructions on safe

use and understand the hazards

involved. Children must not play

with the appliance. Cleaning and user

maintenance must not be carried out

by children without supervision.

PERMITTED USE

CAUTION: The appliance is not

intended to be operated by means

of an external switching device,

such as a timer, or separate remote

controlled system.

This appliance is intended to

be used in household and similar

applications such as: staff kitchen

areas in shops, ofﬁces and other

working environments; farm houses;

by clients in hotels, motels, bed

& breakfast and other residential

environments.

This appliance is not for

professional use. Do not use the

appliance outdoors.

The bulb used inside the appliance

is speciﬁcally designed for domestic

appliances and is not suitable for

general room lighting within the

home (EC Regulation 244/2009).

The appliance is designed for

operation in places where the

ambient temperature comes within

the following ranges, according to

the climatic class given on the rating

plate. The appliance may not work

properly if it is left for a long time at

a temperature outside the speciﬁed

range.

Climatic Class Amb. T. (°C)

SN: From 10 to 32 °C

ST: From 16 to 38 °C;

N: From 16 to 32 °C

T: From 16 to 43 °C

This appliance does not contain

CFCs. The refrigerant circuit

contains R600a (HC). Appliances

with Isobutane (R600a): isobutane is

a natural gas without environmental

impact, but is ﬂammable. Therefore,

make sure the refrigerant circuit

pipes are not damaged, especially

when emptying the refrigerant

circuit.

WARNING: Do not damage the

appliance refrigerant circuit pipes.

WARNING: Keep ventilation

openings, in the appliance enclosure

or in the built-in structure, clear of

obstruction.

5

WARNING: Do not use

mechanical, electric or chemical

means other than those

recommended by the Manufacturer

to speed up the defrost process.

WARNING: Do not use or place

electrical devices inside the appliance

compartments if they are not of the

type expressly authorised by the

Manufacturer.

WARNING: Ice makers and/

or water dispensers not directly

connected to the water supply must

be ﬁlled with potable water only.

WARNING: Automatic ice-makers

and/or water dispensers must be

connected to a water supply that

delivers potable water only, with

mains water pressure between 0.17

and 0.81 MPa (1.7 and 8.1 bar).

Do not store explosive substances

such as aerosol cans with a ﬂammable

propellant in this appliance.

Do not swallow the contents

(non-toxic) of the ice packs (provided

with some models). Do not eat ice

cubes or ice lollies immediately after

taking them out of the freezer since

they may cause cold burns.

For products designed to use

an air ﬁlter inside an accessible fan

cover, the ﬁlter must always be in

position when the refrigerator is in

function.

Do not store glass containers with

liquids in the freezer compartment

since they may break.

Do not obstruct the fan (if included)

with food items.

After placing the food check that the

door of the compartments closes

properly, especially the freezer door.

Damaged gaskets must be

replaced as soon as possible.

Use the refrigerator compartment

only for storing fresh food and the

freezer compartment only for storing

frozen food, freezing fresh food and

making ice cubes.

Avoid storing unwrapped food in

direct contact with internal surfaces

of the refrigerator or freezer

compartments.

Appliances could have special

compartments (Fresh Food

Compartment, Zero Degree Box,

etc.). Unless speciﬁed in the speciﬁc

booklet of product, they can be

removed, maintaining equivalent

performances.

C-Pentane is used as blowing

agent in the insulation foam and it is a

ﬂammable gas.

INSTALLATION

The appliance must be handled

and installed by two or more persons

- risk of injury. Use protective gloves

to unpack and install - risk of cuts.

Installation, including water supply

(if any) and electrical connections,

and repairs must be carried out by

a qualiﬁed technician. Do not repair

or replace any part of the appliance

unless speciﬁcally stated in the user

manual. Keep children away from the

installation site. After unpacking the

appliance, make sure that it has not

been damaged during transport. In

the event of problems, contact the

dealer or your nearest After-sales

Service. Once installed, packaging

waste (plastic, styrofoam parts etc.)

must be stored out of reach of

children - risk of suffocation. The

6

appliance must be disconnected

from the power supply before any

installation operation - risk of electric

shock. During installation, make sure

the appliance does not damage the

power cable - risk of ﬁre or electric

shock. Only activate the appliance

when the installation has been

completed.

Be careful not to damage the

ﬂoors (e.g. parquet) when moving

the appliance. Install the appliance

on a ﬂoor or support strong enough

to take its weight and in a place

suitable for its size and use. Make

sure the appliance is not near a

heat source and that the four feet

are stable and resting on the ﬂoor,

adjust as required, and check that

the appliance is perfectly level using

a spirit level. Wait at least two hours

before switching the appliance on, to

ensure that the refrigerant circuit is

fully efﬁcient.

WARNING: To avoid a hazard

due to instability, positioning or ﬁxing

of the appliance must be done in

accordance with the manufacturer

instructions. It is forbidden to place

the refrigerator in such way that the

metal hose of gas stove, metal gas or

water pipes, or electrical wires are

in contact with the refrigerator back

wall (condenser coil).

All dimensions and spacing needed

for installation of the appliance are in

the Installation instruction booklet.

ELECTRICAL WARNINGS

It must be possible to disconnect

the appliance from the power

supply by unplugging it if plug is

accessible, or by a multi-pole switch

installed upstream of the socket in

accordance with the wiring rules

and the appliance must be earthed

in conformity with national electrical

safety standards.

Do not use extension leads,

multiple sockets or adapters. The

electrical components must not

be accessible to the user after

installation. Do not use the appliance

when you are wet or barefoot. Do

not operate this appliance if it has a

damaged power cable or plug, if it

is not working properly, or if it has

been damaged or dropped.

If the supply cord is damaged, it

must be replaced with an identical

one by the manufacturer, its service

agent or similarly qualiﬁed persons

in order to avoid a hazard - risk of

electric shock.

CLEANING AND

MAINTENANCE

WARNING: Ensure that the

appliance is switched off and

disconnected from the power supply

before performing any maintenance

operation; never use steam cleaning

equipment - risk of electric shock.

Do not use abrasive or harsh

cleaners such as window sprays,

scouring cleansers, ﬂammable

ﬂuids, cleaning waxes, concentrated

detergents, bleaches or cleansers

containing petroleum products

on plastic parts, interior and door

liners or gaskets. Do not use paper

towels, scouring pads, or other harsh

cleaning tools.

DISPOSAL OF PACKAGING

MATERIALS

The packaging material is 100% recyclable and is

marked with the recycle symbol .

7

The various parts of the packaging must therefore

be disposed of responsibly and in full compliance

with local authority regulations governing waste

disposal.

DISPOSAL OF HOUSEHOLD

APPLIANCES

This appliance is manufactured with recyclable or

reusable materials.

Dispose of it in accordance with local waste

disposal regulations. For further information

on the treatment, recovery and recycling of

household electrical appliances, contact your local

authority, the collection service for household

waste or the store where you purchased the

appliance. This appliance is marked in compliance

with European Directive 2012/19/EU, Waste

Electrical and Electronic Equipment (WEEE). By

ensuring this product is disposed of correctly,

you will help prevent negative consequences

for the environment and human health.negative

sull’ambiente e sulla salute umana.

The symbol on the product or on the

accompanying documentation indicates that it

should not be treated as domestic waste but

must be taken to an appropriate collection center

for the recycling of electrical and electronic

equipment.

ENERGY SAVING TIPS

To guarantee adequate ventilation follow

installation instructions. Insufﬁcient ventilation

at the back of the product increases energy

consumption and decreases cooling efﬁciency.

Frequent door opening might cause an increase in

Energy Consumption.

The internal temperature of the appliance and the

Energy Consumption may be affected also by the

ambient temperature, as well as location of the

appliance. Temperature setting should take into

consideration these factors.

Reduce door opening to a minimum.

When thawing frozen food, place in the

refrigerator. The low temperature of the frozen

products cools the food in the refrigerator. Allow

warm food and drinks to cool down before

placing in the appliance.

Positioning of the shelves in the refrigerator has

no impact on the efﬁcient usage of energy. Food

should be placed on the shelves in such way to

ensure proper air circulation (food should not

touch each other and distance between food and

rear wall should be kept).

You can increase storage capacity of frozen food

by removing baskets and, if present, Stop Frost

shelf.

Do not worry about noises coming from the

compressor which are described as normal noises

in this product’s Quick Guide.

8

PROPER USE OF REFRIGERATORS

Leveling feet

1. Precautions before installation:

Information in the Instruction Manual is only for reference. The physical product may differ.

Before installation of accessories, it shall be ensured that the refrigerator is disconnected from

power.

Before adjusting the leveling feet, precautions shall be taken to prevent any personal injury.

2. Schematic diagram of the leveling feet.

LH

The picture above is only for reference.

The actual conﬁguration will depend on the physical product or statement by the distributor

3. Adjusting procedures:

a. Turn the feet clockwise to raise the refrigerator;

b. Turn the feet counterclockwise to lower the refrigerator;

c. Adjust the right and left feet based on the procedures above to a horizontal level.

9

Leveling door

1. Precautions before installation:

Before installation of accessories, it shall be ensured that the refrigerator is disconnected from

power.

Before adjusting the , precautions shall be taken to prevent a door ny personal injury.

2. Schematic diagram of leveling the door

List of tools to be provided by the user

wrench

Fixed shaft

Leveling feet

Loocking nut

Wrench

Adjusting nut

The picture above is only for reference.

The actual conﬁguration will depend on the physical product or statement by the distributor

When the fridge door is low:

Open the door, use a wrench to loosen the locking nut and to rotate the adjusting nut anti-clockwise

to raise the height of the door. Once the doors are aligned, then tighten the locking nut by rotating it

anti-clockwise.

When the fridge door is high:

Open the door, use a wrench to rotate the adjusting nut clockwise to lower the height of the door.

Once the doors are aligned, then tighten the locking nutby rotating it anti-clockwise.

Connection of the Water Facility

1.

Precautions before installation:

Information in the Instruction Manual is only for reference. The physical product may differ.

Before installation of accessories, it shall be ensured that the refrigerator is disconnected from

power.

Water hazards!

The water pressure of the combined fridge-freezer is 2-7 bars. If the water pressure is too high,

please install a decompressor.

Please do not connect combined fridge-freezers to a tap or a tap of water heater.

Please do not bend inlet pipes and drain-pipes when placing, and shall carefully connect water pipes.

Do not use any old and used water pipes.

Please purchase the joint to connect the pipe and the faucet and install it according to the schematic

diagram.

10

2. Schematic diagram

Joint

Connecting hose Hose connector

Snap ring

nut

3. Installing procedures

a. Push the end of the connecting hose into the joint. Fasten the joint to the faucet.

b. Pull out the nut from white ﬂexible hose. Push the terminal of white ﬂexible hose into the hose

connector, fastened with snap ring. If necessary, please rivet the ﬂexible hose onto wall to avoid

stumbling.

c. Carefully unscrew the tap to check whether the pipeline is sealed.

Assembly and Fixing of Filter

List of tools to be provided by the user

screwdriver

1 2

1.

Fix the single clamps on the wall with screws

2.

Put the cartridge into the single clamps;

Snap ring

3 4

Location mark

Water supply

3. Insert one end of the quick-connect elbow to the inlet of the ﬁlter cartridge, with the other

end of the quick-connect elbow inserted to the inlet water pipe against the position mark and

fastened with snap ring;

4. Using the same way as mentioned above, insert one end of the quick-connect elbow to the outlet

of the ﬁlter cartridge, with the other end of the quick-connect elbow inserted to the outlet water

pipe against the position mark.

11

Replace Water Filter

1. Precautions before installation:

Before installation of accessories, it shall be ensured that the refrigerator is disconnected from

power.

After being used for 6 consecutive months, the indicator will ﬂash.

If that happens, please replace.

2. Schematic diagram

3. Procedures:

Pull out the plug. Turn off the water intake. Take off the ﬁlter and the snap ring on the quick

connector and then pull out the water pipe. Insert the new ﬁlter into the quick connector and

then install the snap ring. Re-supply water and check whether there is water ﬂowing out.

If necessary, please repeat above steps. Insert the plug again. Keep pressing the

button for 3 seconds to start up the ﬁlter. The display of disappears.

12

STRUCTURE AND FUNCTIONS

For I&W (Ice and Water) version

The picture above is only for reference.

The actual conﬁguration will depend on the physical product or statement by the distributor

Refrigerating chamber

• The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and

other food consumped in the short term.

• Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.

• Foods are recommended to be sealed up before putting into the refrigerator.

• The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy

use.

Freezing chamber

• The low temperature freezing chamber may keep food fresh for a long time and it is mainly used

to store frozen foods and making ice.

• The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be

consumed in short term.

• Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted

food shall be consumed within the shelf time.

• The temperature should be set to “QUICK-FREEZE”, when you want to refrigerate foods

quickly.

Note: Storage of too much food during operation after the initial connection to power may adversely

affect the freezing effect of the refrigerator. Foods stored shall not block the air outlet; or otherwise

the freezing effect will also be adversely affected.

LED lighting

Ice maker

water dispenser

Glass shelf

Door tray

Drawer

LED lighting

Door tray

Glass shelf

Box for keeping

fruits and

vegetables

Freezing chamber

Refrigerating chamber

Ice Container

(Removeable)

13

LED lighting

Ice maker

water dispenser

Glass shelf

Door tray

Drawer

LED lighting

Door tray

Glass shelf

Box for keeping

fruits and

vegetables

Freezing chamber

Refrigerating chamber

STRUCTURE AND FUNCTIONS

For IDI (In Door Ice) version

The picture above is only for reference.

The actual conﬁguration will depend on the physical product or statement by the distributor

Refrigerating chamber

• The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and

other food consumped in the short term.

• Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.

• Foods are recommended to be sealed up before putting into the refrigerator.

• The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy

use.

Freezing chamber

• The low temperature freezing chamber may keep food fresh for a long time and it is mainly used

to store frozen foods and making ice.

• The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be

consumed in short term.

• Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted

food shall be consumed within the shelf time.

• The temperature should be set to “QUICK-FREEZE”, when you want to refrigerate foods

quickly.

Note: Storage of too much food during operation after the initial connection to power may adversely

affect the freezing effect of the refrigerator. Foods stored shall not block the air outlet; or otherwise

the freezing effect will also be adversely affected.

14

Display

1. Freezer compartment temperature

2. Quick REF.

3. Quick FRZ

4. Refrigerate compartment temperature

5. Vacation icon

6. Water Filter

7. Ice off

8. Fetching ice cubes

9. Fetching crushed ice (IDI version has not

the feature of crushed ice)

10. Fetching cold water

11. Lock/unlock icon

Button operation

A. Freezer compartment temperature adjustment

B. Refrigerate compartment temperature adjustment

C. Mode setting

D. Ice OFF/ ON botton

E. Fetching ice/ Fetching water/Filter set

F. Lock/unlock controls

Operation instructions

The first time the power was turn on for the refrigerator, the display screen will total display for 3

seconds. Meanwhile the starting up bell rings and then the screen enters the normal display of the

operation.The first time for using the refrigerator, temperatures of refrigerating chamber,

temperature and freezing chamber should be set at 5° C/-18 °C respectively.

When the error occurs, the display shows the error code (see next page); during normal operation,

the display shows the set temperature of the cooling compartment.

Under normal circumstances, the refrigerator stops operating for 30 seconds, then the display shows

the lock state, and the display goes out after the lock state continued for 30s.

Lock /unlock

In the unlocked state, continue to press the button LOCK/UNLOCK for 3 seconds, enter the

lock state;

In the locked state, continue to press the button LOCK/UNLOCK for 3 seconds, enter the

unlocked state.

All the following functions must be operated in the unlocking status.

Functions

1

5 6 7 8 10 119

3 42

C

A B

FD E

The picture above is only for reference.

The actual conﬁguration will depend on the physical product or statement by the distributor

15

Mode setting

Press mode button MODE to select different control mode.

Vacation mode

Press the button MODE to enter the vacation mode. Icon lights up, the vacation mode will start

after locking.

Press the button FRZ.TEMP. or REF.TEMP. to exit the vacation mode.

Quick REF. mode

Press the button MODE to enter the quick cooling mode. Icon lights up, the quick cooling mode

will start after locking.

Press the button REF.TEMP. to exit the Quick cooling mode.

Quick FRZ. mode

Press the button MODE to enter the quick freezing mode. Icon lights up, the quick freezing

mode will start, after locking.

Press the button FRZ.TEMP. to exit the Quick freezing mode.

Temperature setting of refrigerating chamber

Press temperature adjusting button of the refrigerating chamber REF.TEMP., cold storage region will

make flashing indication. Then press the button REF.TEMP. again to set the temperature, and will

hear one beep. Setting scope is between 2°C and 8°C.Every time you press the button, the

temperature will change 1°C. After adjusting,the digital tube will keep flashing for 5 seconds. New

temperature setting will come into effect after locking.

Temperature setting of freezing chamber

Press temperature adjusting button of the freezing chamber FRZ.TEMP., quick freezing region will

make flashing indication. Then press the button FRZ.TEMP. again to set the temperature, and you

will hear one beep. Setting scope is between -16°C and -24°C. Every timeyou press the button, the

temperature will change 1°C. After adjusting, the digital tube will keep flashing for 5 seconds. New

temperature setting will come into effect after locking.

Quick-freeze time setting

Choose the quick-freeze mode and press the FRZ.TEMP button continuously for 3 seconds to

enter the quick-freeze time setting mode; with a short press on FRZ.TEMP, set the circulating mode

of “26-48-26-48” after the quick-freeze time is shown on the freezer chamber temperature display

unit

The quick-freeze mode works separately under the 26H and 48H quick-freeze quitting modes.

With the quick-freeze time setting mode on, lock the mode or press the FRZ.TEMP for 3s to quit

the quick-freeze time setting mode.

The 48H quick-freeze mode is used for overall performance test and not recommendable for

customers.

ICE OFF

Press the button and the icon is illuminated or distinguished in order to start/switch

icing function.

DISPERNSER

Press the button to enter the ice/water selection condition; choose the circulating

condition of “Fetching ice cubes /Fetching crushed ice/ Fetching water / none”, and then the

corresponding icon on the panel will be illuminated successively.

When the system is in operation, the working time of the filter will be added up; after 150 days, the

filter icon will be displayed, and 180 days, the filter icon flashed; press and hold the button

for 3s to utilize FILTER RESET function with which the working time of the filter is

reset.

After replace the filter, the flashed icon distinguished.

16

Storage upon power failure

In case of power failure, the instant working state will be locked and maintained until re-

electrification.

Opening warning and alarm control

When the refrigerator chamber door gets open, the warning tone will play. If the door is not closed in

two minutes, the buzzer will sound once every minute until the door is closed.

Fault indication

The following warnings appearing on the display indicate corresponding faults of the refrigerator.

Though the refrigerator may still haverefrigerator and freezing function with the following faults, the

user shall contact a maintenance specialist for maintenance, so as to ensure normal use of the

refrigerator.

Error code Error description

E0 Icemaker error

E1 Temperature sensor detection circuit error of refrigerating chamber

E2 Temperature sensor detection circuit error of freezing chamber

E5 Freezing defrost sensor detection circuit error

E6 Communication error

E7 Circulation of temperature sensor detection circuit error

EE Icemaker sensor circuit

EH Moisture sensor error

Fetching water and Ice

• Sounds will be produced during making ice cubes and crushed ice: Water valve will produce

buzzing sounds water’s flowing into ice vessel will produce sounds; grinding machine’s grinding

ice into small pieces or product ice’s falling into the container will produce sounds. The sounds

are normal.

• Scratching noises may be produced when taking out the ice cubes. Nothing to worry about this.

The ice in the container may be stuck together. In such cases, please take out the ice container

and separate stuck ice into pieces by means of, for instance, using plastic or wooden spoons to

push hard on the ice carefully.

• Other possibilities are illustrated in the chapter “ice container cleaning”To avoid overheating of

the ice-making machine’s engine, please fetch ice about 1 minute after the stopping. Please wait

for a while until the engine’s temperature reaches working temperature. Please fetch the ice

from the ice container if you need a lot of ice.

• The chapter “ice container cleaning” explains how to remove ice container from freezer

compartment.

If there is no enough ice in the ice container, the ice cannot be taken out.Please wait for a while

until new ice is made.To prevent ice smell or bad taste of the ice, please clean the ice container

regularly.

• Ice and water can only be fetched when the door of freezer compartment is closed. In the

process of fetching water and ice, if you open the freezer door, that process will automatically

end.

• When it displays or goes out, you click the buttons of water dispenser again.

17

Fetching cold water

Keep pressing the buttons until the indicator turns on.

Push the container in the direction of fetching water cushion, Cold water starts to ﬂow into the

container.

Remove the container from fetching water cushion and end the exporting of water.

Fetching crushed icer

Keep pressing the buttons of Water Dispenser until the signal turns up.

Make the container tight with mouth of water dispenser to prevent the side jet.

Press the container in the direction of fetching water cushion. Fill the container with crushed ice.

Remove the container from fetching water cushion and end the exporting of water.

Fetching ice cubes

Keep pressing the buttons until the signal lights up.

Push the container in the direction of fetching water cushion.

Ice cubes start to fall into the container.

Remove the container from fetching water cushion and end the exporting of ice.

Lock the ice-making machine

If the function of fetching water and ice is not used for long, you can lock the ice-making machine:

Press the button , the display lights up.

18

Temperature setting

Important note: The display will only be illuminated when a button is pressed or a compartment

door opened, at all other times the display will be in a standby state.

Important note: The control panel will automatically lock itself. Before adjusting the temperature or

selecting any mode the panel must be unlocked by pressing and holding the lock button for 3 seconds

until the lock symbol disappears from the display.

Note: The standard operating temperature for the fridge compartment should be between 0°C and

4°Cand the standard operating temperature for the freezer compartment should be between -18°C

and -25°C.

Note: The temperature of the freshly stored food and how often the door is opened affects the

temperature in the refrigerator compartment. If required, change the temperature setting.

Freezer compartment temperature adjustment

To change the temperature of the freezer compartment, press the freezer temperature adjustment button.

The temperature of the freezer can be set between -16°C and -24°C.

Press the freezer temperature adjustment button until the required temperature is shown on the display.

Please note that during the temperature setting process the freezer temperature on the display will ﬂash.

Once the required temperature is set the freezer temperature will ﬂash for a few seconds, the display will

be automatically locked and then after approximately 30 seconds the display will disappear.

Freezer compartment temperature

The freezer compartment temperature will be shown on the display when a compartment door is opened

or a button is pressed.

Fridge compartment temperature adjustment

To change the temperature of the fridge compartment, press the fridge temperature adjustment button.

The temperature of the fridge can be set between 2°Cand 8°C.

Press the fridge temperature adjustment button until the required temperature is shown on the display.

Please note that during the temperature setting process the fridge temperature on the display will ﬂash.

Once the required temperature is set the fridge temperature will ﬂash for a few seconds, the display will be

automatically locked and then after approximately 30 seconds the display will disappear.

Fridge compartment temperature

The fridge compartment temperature will be shown on the display when a compartment door is opened or

a button is pressed.

Mode settings

The appliance has 4 pre-set modes that can be selected by pressing the mode button and these are:

• Vacation (holiday)

• Quick freeze

• Quick freeze and cool

• Quick cool

Vacation mode (holiday mode)

This mode is designed to prevent your appliance from wasting energy during times when it’s not in

regular use (when you are on vacation/holiday for example).

By selecting this function the temperature of the freezer compartment will automatically be set to

-18°Cand the fridge compartment will be turned off.

To use the vacation mode you must press the mode button until the vacation icon is lit on the display.

To exit the vacation mode press the mode button until no mode icon is lit on the display.

Important note: If this mode is selected then all food and drinks must be removed from the fridge

compartment

19

Quick freeze

This mode is designed for when freezing items that are not already pre-frozen.

If you are placing fresh food inside the freezer then ideally you should have lowered the temperature

beforehand ready to accommodate it and facilitate as quick a freeze as possible. You may need to pre

select the quick freeze mode as early as 12 hours before. By selecting this function the temperature

of the freezer compartment will automatically be set to -24 °C for a maximum of 26 hours (after this

time the temperature will revert to what it was previously set at). If the temperature of freezer goes

below -24°C during the 26 hours then the appliance will exit the quick freeze mode automatically.

To use the quick freeze mode you must press the mode button until the quick freeze icon is lit on the

display. To exit the quick freeze mode press the mode button until no mode icon is lit on the display.

Quick freeze & cool

In order to have a colder temperature in the refrigerator, put the quick freeze & cool setting on to

set the unit to the coolest temperature. By selecting this function the temperature of the freezer

and fridge compartments will automatically be set to -24°Cand 2°Cfor a maximum of 26 hours for

the freezer setting and 2 hours 30 minutes for the fridge setting (after this time the temperature will

revert to what it was previously set at). If the temperature of freezer goes below -24°C during the 26

hours then the appliance will exit the quick freeze mode automatically.

To use the quick freeze and cool modes together you must press the mode button until the quick

freeze and cool icons are lit on the display. To exit the quick freeze and cool mode press the mode

button until no mode icon is lit on the display.

Quick cool

In order to have a colder temperature in the refrigerator, put the quick cool setting on to set the unit

to the coolest temperature. By selecting this function the temperature of the fridge compartment

will automatically be set to 2°C for a maximum of 2 hours and 30 minutes (after this time the

temperature will revert to what it was previously set at).

To use the quick cool mode you must press the mode button until the quick cool icon is lit on the

display. To exit the quick cool mode press the mode button until no mode icon is lit on the display.

Lock/unlock

To use the lock function you must press the lock button (the symbol on the display will be lit). This

will cause all actions to be ignored, until the lock is removed.

To unlock the display and functions, hold the lock button for 3 seconds (the symbol on the display will

be disappear).

How to make ice

1. Gently pull out the ice tray and ﬁll the ice

tray with water to the water level line.Then

carefully replace the ice tray horizontally.

2. When the ice cubes are ready, turn the knob

clockwise (turn to the end and release), the

ice cubes will drop from the ice tray into the

ice box.

* Picture is only for illustration

Ice tray

Water level line

20

Notes:

• In order to make ice cubes quickly, set the freezer to the lowest temperature, or select the Quick

Freeze Mode.This will make the temperature of the freezer lower.

• Do not over-ﬁll with wate . It may become difﬁcult to remove the ice cubes from ice tray and any

trickle of water into the ice box will make the ice cubes freeze together.

• If the knob is turned before the ice cubes are ready, any remaining water will trickle into the ice

box and cause the ice cubes to freeze together.

Shelving and rack adjustment

Important note: all food and drink should be removed from all shelves and racks before adjusting or

removing them

You can adjust the shelving in the fridge compartment to your required conﬁguration. To remove a

shelf, lift it up slightly so the plastic stabilisers that on either side of the shelf are above the shelf rails

and then pull it towards you.

You can adjust the racks in the fridge and freezer compartments to yourrequired conﬁguration. To

remove a rack hold both sides of the rack, lift it upwards (1) and then pull it towards you (2).

Bulb Replacement

The fridge and freezer lights are energy efﬁcient, long life LEDs. Therefore, they should not need

replacing through out the life of the product.

The bulb is a direct current 12V LED module and in the unlikely event it does fail then it will need to

be replaced by a qualiﬁed engineer.

refrigerator lamp

lamp shade

Reversing the Door

The doors cannot be reversed.

La pagina sta caricando ...

Bauknecht SXBBE 930 WD 2 Guida utente

Bauknecht SXBBE 930 WD 2 Guida utente

in altre lingue

Documenti correlati

Altri documenti