Bauknecht SXBBE 930 WD 2 Guida utente

Categoria
Frigo-congelatori
Tipo
Guida utente
Gebrauchsanweisung
Instructions for use
Mode d’emploi
Gebruiksaanwijzing
Istruzioni per l’uso
Brugsanvisning
Bruksanvisning
Käyttöohje
Manual de utilização
Instrucciones para el uso
Οδηγίες χρήσης
Instrukcje użytkowania
Használati utasítás
Инструкция за употреба
Қолдану бойынша нұсқаулық
Návod k použití
Návod na použitie
Instrucțiuni de utilizare
Инструкции по эксплуатации
Інструкція з експлуатації
ENGLISH Instructions for use Page 4
DEUTSCH Gebrauchsanweisung Seite 28
ESPAÑOL Instrucciones para el uso Página 52
ITALIANO Istruzioni per l’uso Pagina 76
ČESKY Návod k použití Strana 100
4
SAFETY INSTRUCTIONS
IMPORTANT to be read and observed
Before using the appliance, read
these safety instructions. Keep them
nearby for future reference.
These instructions and the appliance
itself provide important safety
warnings, to be observed at all times.
The manufacturer declines any
liability for failure to observe these
safety instructions, for inappropriate
use of the appliance or incorrect
setting of controls.
Very young children (0-3 years)
should be kept away from the
appliance. Young children (3-8
years) should be kept away from
the appliance unless continuously
supervised. Children from 8 years
old and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge can use this appliance
only if they are supervised or have
been given instructions on safe
use and understand the hazards
involved. Children must not play
with the appliance. Cleaning and user
maintenance must not be carried out
by children without supervision.
PERMITTED USE
CAUTION: The appliance is not
intended to be operated by means
of an external switching device,
such as a timer, or separate remote
controlled system.
This appliance is intended to
be used in household and similar
applications such as: staff kitchen
areas in shops, offices and other
working environments; farm houses;
by clients in hotels, motels, bed
& breakfast and other residential
environments.
This appliance is not for
professional use. Do not use the
appliance outdoors.
The bulb used inside the appliance
is specifically designed for domestic
appliances and is not suitable for
general room lighting within the
home (EC Regulation 244/2009).
The appliance is designed for
operation in places where the
ambient temperature comes within
the following ranges, according to
the climatic class given on the rating
plate. The appliance may not work
properly if it is left for a long time at
a temperature outside the specified
range.
Climatic Class Amb. T. (°C)
SN: From 10 to 32 °C
ST: From 16 to 38 °C;
N: From 16 to 32 °C
T: From 16 to 43 °C
This appliance does not contain
CFCs. The refrigerant circuit
contains R600a (HC). Appliances
with Isobutane (R600a): isobutane is
a natural gas without environmental
impact, but is flammable. Therefore,
make sure the refrigerant circuit
pipes are not damaged, especially
when emptying the refrigerant
circuit.
WARNING: Do not damage the
appliance refrigerant circuit pipes.
WARNING: Keep ventilation
openings, in the appliance enclosure
or in the built-in structure, clear of
obstruction.
5
WARNING: Do not use
mechanical, electric or chemical
means other than those
recommended by the Manufacturer
to speed up the defrost process.
WARNING: Do not use or place
electrical devices inside the appliance
compartments if they are not of the
type expressly authorised by the
Manufacturer.
WARNING: Ice makers and/
or water dispensers not directly
connected to the water supply must
be filled with potable water only.
WARNING: Automatic ice-makers
and/or water dispensers must be
connected to a water supply that
delivers potable water only, with
mains water pressure between 0.17
and 0.81 MPa (1.7 and 8.1 bar).
Do not store explosive substances
such as aerosol cans with a flammable
propellant in this appliance.
Do not swallow the contents
(non-toxic) of the ice packs (provided
with some models). Do not eat ice
cubes or ice lollies immediately after
taking them out of the freezer since
they may cause cold burns.
For products designed to use
an air filter inside an accessible fan
cover, the filter must always be in
position when the refrigerator is in
function.
Do not store glass containers with
liquids in the freezer compartment
since they may break.
Do not obstruct the fan (if included)
with food items.
After placing the food check that the
door of the compartments closes
properly, especially the freezer door.
Damaged gaskets must be
replaced as soon as possible.
Use the refrigerator compartment
only for storing fresh food and the
freezer compartment only for storing
frozen food, freezing fresh food and
making ice cubes.
Avoid storing unwrapped food in
direct contact with internal surfaces
of the refrigerator or freezer
compartments.
Appliances could have special
compartments (Fresh Food
Compartment, Zero Degree Box,
etc.). Unless specified in the specific
booklet of product, they can be
removed, maintaining equivalent
performances.
C-Pentane is used as blowing
agent in the insulation foam and it is a
flammable gas.
INSTALLATION
The appliance must be handled
and installed by two or more persons
- risk of injury. Use protective gloves
to unpack and install - risk of cuts.
Installation, including water supply
(if any) and electrical connections,
and repairs must be carried out by
a qualified technician. Do not repair
or replace any part of the appliance
unless specifically stated in the user
manual. Keep children away from the
installation site. After unpacking the
appliance, make sure that it has not
been damaged during transport. In
the event of problems, contact the
dealer or your nearest After-sales
Service. Once installed, packaging
waste (plastic, styrofoam parts etc.)
must be stored out of reach of
children - risk of suffocation. The
6
appliance must be disconnected
from the power supply before any
installation operation - risk of electric
shock. During installation, make sure
the appliance does not damage the
power cable - risk of fire or electric
shock. Only activate the appliance
when the installation has been
completed.
Be careful not to damage the
floors (e.g. parquet) when moving
the appliance. Install the appliance
on a floor or support strong enough
to take its weight and in a place
suitable for its size and use. Make
sure the appliance is not near a
heat source and that the four feet
are stable and resting on the floor,
adjust as required, and check that
the appliance is perfectly level using
a spirit level. Wait at least two hours
before switching the appliance on, to
ensure that the refrigerant circuit is
fully efficient.
WARNING: To avoid a hazard
due to instability, positioning or fixing
of the appliance must be done in
accordance with the manufacturer
instructions. It is forbidden to place
the refrigerator in such way that the
metal hose of gas stove, metal gas or
water pipes, or electrical wires are
in contact with the refrigerator back
wall (condenser coil).
All dimensions and spacing needed
for installation of the appliance are in
the Installation instruction booklet.
ELECTRICAL WARNINGS
It must be possible to disconnect
the appliance from the power
supply by unplugging it if plug is
accessible, or by a multi-pole switch
installed upstream of the socket in
accordance with the wiring rules
and the appliance must be earthed
in conformity with national electrical
safety standards.
Do not use extension leads,
multiple sockets or adapters. The
electrical components must not
be accessible to the user after
installation. Do not use the appliance
when you are wet or barefoot. Do
not operate this appliance if it has a
damaged power cable or plug, if it
is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it
must be replaced with an identical
one by the manufacturer, its service
agent or similarly qualified persons
in order to avoid a hazard - risk of
electric shock.
CLEANING AND
MAINTENANCE
WARNING: Ensure that the
appliance is switched off and
disconnected from the power supply
before performing any maintenance
operation; never use steam cleaning
equipment - risk of electric shock.
Do not use abrasive or harsh
cleaners such as window sprays,
scouring cleansers, flammable
fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers
containing petroleum products
on plastic parts, interior and door
liners or gaskets. Do not use paper
towels, scouring pads, or other harsh
cleaning tools.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100% recyclable and is
marked with the recycle symbol .
7
The various parts of the packaging must therefore
be disposed of responsibly and in full compliance
with local authority regulations governing waste
disposal.
DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured with recyclable or
reusable materials.
Dispose of it in accordance with local waste
disposal regulations. For further information
on the treatment, recovery and recycling of
household electrical appliances, contact your local
authority, the collection service for household
waste or the store where you purchased the
appliance. This appliance is marked in compliance
with European Directive 2012/19/EU, Waste
Electrical and Electronic Equipment (WEEE). By
ensuring this product is disposed of correctly,
you will help prevent negative consequences
for the environment and human health.negative
sull’ambiente e sulla salute umana.
The symbol on the product or on the
accompanying documentation indicates that it
should not be treated as domestic waste but
must be taken to an appropriate collection center
for the recycling of electrical and electronic
equipment.
ENERGY SAVING TIPS
To guarantee adequate ventilation follow
installation instructions. Insufficient ventilation
at the back of the product increases energy
consumption and decreases cooling efficiency.
Frequent door opening might cause an increase in
Energy Consumption.
The internal temperature of the appliance and the
Energy Consumption may be affected also by the
ambient temperature, as well as location of the
appliance. Temperature setting should take into
consideration these factors.
Reduce door opening to a minimum.
When thawing frozen food, place in the
refrigerator. The low temperature of the frozen
products cools the food in the refrigerator. Allow
warm food and drinks to cool down before
placing in the appliance.
Positioning of the shelves in the refrigerator has
no impact on the efficient usage of energy. Food
should be placed on the shelves in such way to
ensure proper air circulation (food should not
touch each other and distance between food and
rear wall should be kept).
You can increase storage capacity of frozen food
by removing baskets and, if present, Stop Frost
shelf.
Do not worry about noises coming from the
compressor which are described as normal noises
in this product’s Quick Guide.
8
PROPER USE OF REFRIGERATORS
Leveling feet
1. Precautions before installation:
Information in the Instruction Manual is only for reference. The physical product may differ.
Before installation of accessories, it shall be ensured that the refrigerator is disconnected from
power.
Before adjusting the leveling feet, precautions shall be taken to prevent any personal injury.
2. Schematic diagram of the leveling feet.
LH
The picture above is only for reference.
The actual configuration will depend on the physical product or statement by the distributor
3. Adjusting procedures:
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the refrigerator;
c. Adjust the right and left feet based on the procedures above to a horizontal level.
9
Leveling door
1. Precautions before installation:
Before installation of accessories, it shall be ensured that the refrigerator is disconnected from
power.
Before adjusting the , precautions shall be taken to prevent a door ny personal injury.
2. Schematic diagram of leveling the door
List of tools to be provided by the user
wrench
Fixed shaft
Leveling feet
Loocking nut
Wrench
Adjusting nut
The picture above is only for reference.
The actual configuration will depend on the physical product or statement by the distributor
When the fridge door is low:
Open the door, use a wrench to loosen the locking nut and to rotate the adjusting nut anti-clockwise
to raise the height of the door. Once the doors are aligned, then tighten the locking nut by rotating it
anti-clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the height of the door.
Once the doors are aligned, then tighten the locking nutby rotating it anti-clockwise.
Connection of the Water Facility
1.
Precautions before installation:
Information in the Instruction Manual is only for reference. The physical product may differ.
Before installation of accessories, it shall be ensured that the refrigerator is disconnected from
power.
Water hazards!
The water pressure of the combined fridge-freezer is 2-7 bars. If the water pressure is too high,
please install a decompressor.
Please do not connect combined fridge-freezers to a tap or a tap of water heater.
Please do not bend inlet pipes and drain-pipes when placing, and shall carefully connect water pipes.
Do not use any old and used water pipes.
Please purchase the joint to connect the pipe and the faucet and install it according to the schematic
diagram.
10
2. Schematic diagram
Joint
Connecting hose Hose connector
Snap ring
nut
3. Installing procedures
a. Push the end of the connecting hose into the joint. Fasten the joint to the faucet.
b. Pull out the nut from white flexible hose. Push the terminal of white flexible hose into the hose
connector, fastened with snap ring. If necessary, please rivet the flexible hose onto wall to avoid
stumbling.
c. Carefully unscrew the tap to check whether the pipeline is sealed.
Assembly and Fixing of Filter
List of tools to be provided by the user
screwdriver
1 2
1.
Fix the single clamps on the wall with screws
2.
Put the cartridge into the single clamps;
Snap ring
3 4
Location mark
Water supply
3. Insert one end of the quick-connect elbow to the inlet of the filter cartridge, with the other
end of the quick-connect elbow inserted to the inlet water pipe against the position mark and
fastened with snap ring;
4. Using the same way as mentioned above, insert one end of the quick-connect elbow to the outlet
of the filter cartridge, with the other end of the quick-connect elbow inserted to the outlet water
pipe against the position mark.
11
Replace Water Filter
1. Precautions before installation:
Before installation of accessories, it shall be ensured that the refrigerator is disconnected from
power.
After being used for 6 consecutive months, the indicator will flash.
If that happens, please replace.
2. Schematic diagram
3. Procedures:
Pull out the plug. Turn off the water intake. Take off the filter and the snap ring on the quick
connector and then pull out the water pipe. Insert the new filter into the quick connector and
then install the snap ring. Re-supply water and check whether there is water flowing out.
If necessary, please repeat above steps. Insert the plug again. Keep pressing the
button for 3 seconds to start up the filter. The display of disappears.
12
STRUCTURE AND FUNCTIONS
For I&W (Ice and Water) version
The picture above is only for reference.
The actual configuration will depend on the physical product or statement by the distributor
Refrigerating chamber
The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and
other food consumped in the short term.
Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
Foods are recommended to be sealed up before putting into the refrigerator.
The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy
use.
Freezing chamber
The low temperature freezing chamber may keep food fresh for a long time and it is mainly used
to store frozen foods and making ice.
The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be
consumed in short term.
Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted
food shall be consumed within the shelf time.
The temperature should be set to “QUICK-FREEZE”, when you want to refrigerate foods
quickly.
Note: Storage of too much food during operation after the initial connection to power may adversely
affect the freezing effect of the refrigerator. Foods stored shall not block the air outlet; or otherwise
the freezing effect will also be adversely affected.
LED lighting
Ice maker
water dispenser
Glass shelf
Door tray
Drawer
LED lighting
Door tray
Glass shelf
Box for keeping
fruits and
vegetables
Freezing chamber
Refrigerating chamber
Ice Container
(Removeable)
13
LED lighting
Ice maker
water dispenser
Glass shelf
Door tray
Drawer
LED lighting
Door tray
Glass shelf
Box for keeping
fruits and
vegetables
Freezing chamber
Refrigerating chamber
STRUCTURE AND FUNCTIONS
For IDI (In Door Ice) version
The picture above is only for reference.
The actual configuration will depend on the physical product or statement by the distributor
Refrigerating chamber
The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and
other food consumped in the short term.
Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
Foods are recommended to be sealed up before putting into the refrigerator.
The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy
use.
Freezing chamber
The low temperature freezing chamber may keep food fresh for a long time and it is mainly used
to store frozen foods and making ice.
The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be
consumed in short term.
Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted
food shall be consumed within the shelf time.
The temperature should be set to “QUICK-FREEZE”, when you want to refrigerate foods
quickly.
Note: Storage of too much food during operation after the initial connection to power may adversely
affect the freezing effect of the refrigerator. Foods stored shall not block the air outlet; or otherwise
the freezing effect will also be adversely affected.
14
Display
1. Freezer compartment temperature
2. Quick REF.
3. Quick FRZ
4. Refrigerate compartment temperature
5. Vacation icon
6. Water Filter
7. Ice off
8. Fetching ice cubes
9. Fetching crushed ice (IDI version has not
the feature of crushed ice)
10. Fetching cold water
11. Lock/unlock icon
Button operation
A. Freezer compartment temperature adjustment
B. Refrigerate compartment temperature adjustment
C. Mode setting
D. Ice OFF/ ON botton
E. Fetching ice/ Fetching water/Filter set
F. Lock/unlock controls
Operation instructions
The first time the power was turn on for the refrigerator, the display screen will total display for 3
seconds. Meanwhile the starting up bell rings and then the screen enters the normal display of the
operation.The first time for using the refrigerator, temperatures of refrigerating chamber,
temperature and freezing chamber should be set at 5° C/-18 °C respectively.
When the error occurs, the display shows the error code (see next page); during normal operation,
the display shows the set temperature of the cooling compartment.
Under normal circumstances, the refrigerator stops operating for 30 seconds, then the display shows
the lock state, and the display goes out after the lock state continued for 30s.
Lock /unlock
In the unlocked state, continue to press the button LOCK/UNLOCK for 3 seconds, enter the
lock state;
In the locked state, continue to press the button LOCK/UNLOCK for 3 seconds, enter the
unlocked state.
All the following functions must be operated in the unlocking status.
Functions
1
5 6 7 8 10 119
3 42
C
A B
FD E
The picture above is only for reference.
The actual configuration will depend on the physical product or statement by the distributor
15
Mode setting
Press mode button MODE to select different control mode.
Vacation mode
Press the button MODE to enter the vacation mode. Icon lights up, the vacation mode will start
after locking.
Press the button FRZ.TEMP. or REF.TEMP. to exit the vacation mode.
Quick REF. mode
Press the button MODE to enter the quick cooling mode. Icon lights up, the quick cooling mode
will start after locking.
Press the button REF.TEMP. to exit the Quick cooling mode.
Quick FRZ. mode
Press the button MODE to enter the quick freezing mode. Icon lights up, the quick freezing
mode will start, after locking.
Press the button FRZ.TEMP. to exit the Quick freezing mode.
Temperature setting of refrigerating chamber
Press temperature adjusting button of the refrigerating chamber REF.TEMP., cold storage region will
make flashing indication. Then press the button REF.TEMP. again to set the temperature, and will
hear one beep. Setting scope is between 2°C and 8°C.Every time you press the button, the
temperature will change 1°C. After adjusting,the digital tube will keep flashing for 5 seconds. New
temperature setting will come into effect after locking.
Temperature setting of freezing chamber
Press temperature adjusting button of the freezing chamber FRZ.TEMP., quick freezing region will
make flashing indication. Then press the button FRZ.TEMP. again to set the temperature, and you
will hear one beep. Setting scope is between -16°C and -24°C. Every timeyou press the button, the
temperature will change 1°C. After adjusting, the digital tube will keep flashing for 5 seconds. New
temperature setting will come into effect after locking.
Quick-freeze time setting
Choose the quick-freeze mode and press the FRZ.TEMP button continuously for 3 seconds to
enter the quick-freeze time setting mode; with a short press on FRZ.TEMP, set the circulating mode
of “26-48-26-48” after the quick-freeze time is shown on the freezer chamber temperature display
unit
The quick-freeze mode works separately under the 26H and 48H quick-freeze quitting modes.
With the quick-freeze time setting mode on, lock the mode or press the FRZ.TEMP for 3s to quit
the quick-freeze time setting mode.
The 48H quick-freeze mode is used for overall performance test and not recommendable for
customers.
ICE OFF
Press the button and the icon is illuminated or distinguished in order to start/switch
icing function.
DISPERNSER
Press the button to enter the ice/water selection condition; choose the circulating
condition of “Fetching ice cubes /Fetching crushed ice/ Fetching water / none”, and then the
corresponding icon on the panel will be illuminated successively.
When the system is in operation, the working time of the filter will be added up; after 150 days, the
filter icon will be displayed, and 180 days, the filter icon flashed; press and hold the button
for 3s to utilize FILTER RESET function with which the working time of the filter is
reset.
After replace the filter, the flashed icon distinguished.
16
Storage upon power failure
In case of power failure, the instant working state will be locked and maintained until re-
electrification.
Opening warning and alarm control
When the refrigerator chamber door gets open, the warning tone will play. If the door is not closed in
two minutes, the buzzer will sound once every minute until the door is closed.
Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator.
Though the refrigerator may still haverefrigerator and freezing function with the following faults, the
user shall contact a maintenance specialist for maintenance, so as to ensure normal use of the
refrigerator.
Error code Error description
E0 Icemaker error
E1 Temperature sensor detection circuit error of refrigerating chamber
E2 Temperature sensor detection circuit error of freezing chamber
E5 Freezing defrost sensor detection circuit error
E6 Communication error
E7 Circulation of temperature sensor detection circuit error
EE Icemaker sensor circuit
EH Moisture sensor error
Fetching water and Ice
Sounds will be produced during making ice cubes and crushed ice: Water valve will produce
buzzing sounds water’s flowing into ice vessel will produce sounds; grinding machine’s grinding
ice into small pieces or product ice’s falling into the container will produce sounds. The sounds
are normal.
Scratching noises may be produced when taking out the ice cubes. Nothing to worry about this.
The ice in the container may be stuck together. In such cases, please take out the ice container
and separate stuck ice into pieces by means of, for instance, using plastic or wooden spoons to
push hard on the ice carefully.
Other possibilities are illustrated in the chapter “ice container cleaning”To avoid overheating of
the ice-making machine’s engine, please fetch ice about 1 minute after the stopping. Please wait
for a while until the engine’s temperature reaches working temperature. Please fetch the ice
from the ice container if you need a lot of ice.
The chapter “ice container cleaning” explains how to remove ice container from freezer
compartment.
If there is no enough ice in the ice container, the ice cannot be taken out.Please wait for a while
until new ice is made.To prevent ice smell or bad taste of the ice, please clean the ice container
regularly.
Ice and water can only be fetched when the door of freezer compartment is closed. In the
process of fetching water and ice, if you open the freezer door, that process will automatically
end.
When it displays or goes out, you click the buttons of water dispenser again.
17
Fetching cold water
Keep pressing the buttons until the indicator turns on.
Push the container in the direction of fetching water cushion, Cold water starts to flow into the
container.
Remove the container from fetching water cushion and end the exporting of water.
Fetching crushed icer
Keep pressing the buttons of Water Dispenser until the signal turns up.
Make the container tight with mouth of water dispenser to prevent the side jet.
Press the container in the direction of fetching water cushion. Fill the container with crushed ice.
Remove the container from fetching water cushion and end the exporting of water.
Fetching ice cubes
Keep pressing the buttons until the signal lights up.
Push the container in the direction of fetching water cushion.
Ice cubes start to fall into the container.
Remove the container from fetching water cushion and end the exporting of ice.
Lock the ice-making machine
If the function of fetching water and ice is not used for long, you can lock the ice-making machine:
Press the button , the display lights up.
18
Temperature setting
Important note: The display will only be illuminated when a button is pressed or a compartment
door opened, at all other times the display will be in a standby state.
Important note: The control panel will automatically lock itself. Before adjusting the temperature or
selecting any mode the panel must be unlocked by pressing and holding the lock button for 3 seconds
until the lock symbol disappears from the display.
Note: The standard operating temperature for the fridge compartment should be between 0°C and
4°Cand the standard operating temperature for the freezer compartment should be between -18°C
and -25°C.
Note: The temperature of the freshly stored food and how often the door is opened affects the
temperature in the refrigerator compartment. If required, change the temperature setting.
Freezer compartment temperature adjustment
To change the temperature of the freezer compartment, press the freezer temperature adjustment button.
The temperature of the freezer can be set between -16°C and -24°C.
Press the freezer temperature adjustment button until the required temperature is shown on the display.
Please note that during the temperature setting process the freezer temperature on the display will flash.
Once the required temperature is set the freezer temperature will flash for a few seconds, the display will
be automatically locked and then after approximately 30 seconds the display will disappear.
Freezer compartment temperature
The freezer compartment temperature will be shown on the display when a compartment door is opened
or a button is pressed.
Fridge compartment temperature adjustment
To change the temperature of the fridge compartment, press the fridge temperature adjustment button.
The temperature of the fridge can be set between 2°Cand 8°C.
Press the fridge temperature adjustment button until the required temperature is shown on the display.
Please note that during the temperature setting process the fridge temperature on the display will flash.
Once the required temperature is set the fridge temperature will flash for a few seconds, the display will be
automatically locked and then after approximately 30 seconds the display will disappear.
Fridge compartment temperature
The fridge compartment temperature will be shown on the display when a compartment door is opened or
a button is pressed.
Mode settings
The appliance has 4 pre-set modes that can be selected by pressing the mode button and these are:
Vacation (holiday)
Quick freeze
Quick freeze and cool
Quick cool
Vacation mode (holiday mode)
This mode is designed to prevent your appliance from wasting energy during times when it’s not in
regular use (when you are on vacation/holiday for example).
By selecting this function the temperature of the freezer compartment will automatically be set to
-18°Cand the fridge compartment will be turned off.
To use the vacation mode you must press the mode button until the vacation icon is lit on the display.
To exit the vacation mode press the mode button until no mode icon is lit on the display.
Important note: If this mode is selected then all food and drinks must be removed from the fridge
compartment
19
Quick freeze
This mode is designed for when freezing items that are not already pre-frozen.
If you are placing fresh food inside the freezer then ideally you should have lowered the temperature
beforehand ready to accommodate it and facilitate as quick a freeze as possible. You may need to pre
select the quick freeze mode as early as 12 hours before. By selecting this function the temperature
of the freezer compartment will automatically be set to -24 °C for a maximum of 26 hours (after this
time the temperature will revert to what it was previously set at). If the temperature of freezer goes
below -24°C during the 26 hours then the appliance will exit the quick freeze mode automatically.
To use the quick freeze mode you must press the mode button until the quick freeze icon is lit on the
display. To exit the quick freeze mode press the mode button until no mode icon is lit on the display.
Quick freeze & cool
In order to have a colder temperature in the refrigerator, put the quick freeze & cool setting on to
set the unit to the coolest temperature. By selecting this function the temperature of the freezer
and fridge compartments will automatically be set to -24°Cand 2°Cfor a maximum of 26 hours for
the freezer setting and 2 hours 30 minutes for the fridge setting (after this time the temperature will
revert to what it was previously set at). If the temperature of freezer goes below -24°C during the 26
hours then the appliance will exit the quick freeze mode automatically.
To use the quick freeze and cool modes together you must press the mode button until the quick
freeze and cool icons are lit on the display. To exit the quick freeze and cool mode press the mode
button until no mode icon is lit on the display.
Quick cool
In order to have a colder temperature in the refrigerator, put the quick cool setting on to set the unit
to the coolest temperature. By selecting this function the temperature of the fridge compartment
will automatically be set to 2°C for a maximum of 2 hours and 30 minutes (after this time the
temperature will revert to what it was previously set at).
To use the quick cool mode you must press the mode button until the quick cool icon is lit on the
display. To exit the quick cool mode press the mode button until no mode icon is lit on the display.
Lock/unlock
To use the lock function you must press the lock button (the symbol on the display will be lit). This
will cause all actions to be ignored, until the lock is removed.
To unlock the display and functions, hold the lock button for 3 seconds (the symbol on the display will
be disappear).
How to make ice
1. Gently pull out the ice tray and fill the ice
tray with water to the water level line.Then
carefully replace the ice tray horizontally.
2. When the ice cubes are ready, turn the knob
clockwise (turn to the end and release), the
ice cubes will drop from the ice tray into the
ice box.
* Picture is only for illustration
Ice tray
Water level line
20
Notes:
In order to make ice cubes quickly, set the freezer to the lowest temperature, or select the Quick
Freeze Mode.This will make the temperature of the freezer lower.
Do not over-fill with wate . It may become difficult to remove the ice cubes from ice tray and any
trickle of water into the ice box will make the ice cubes freeze together.
If the knob is turned before the ice cubes are ready, any remaining water will trickle into the ice
box and cause the ice cubes to freeze together.
Shelving and rack adjustment
Important note: all food and drink should be removed from all shelves and racks before adjusting or
removing them
You can adjust the shelving in the fridge compartment to your required configuration. To remove a
shelf, lift it up slightly so the plastic stabilisers that on either side of the shelf are above the shelf rails
and then pull it towards you.
You can adjust the racks in the fridge and freezer compartments to yourrequired configuration. To
remove a rack hold both sides of the rack, lift it upwards (1) and then pull it towards you (2).
Bulb Replacement
The fridge and freezer lights are energy efficient, long life LEDs. Therefore, they should not need
replacing through out the life of the product.
The bulb is a direct current 12V LED module and in the unlikely event it does fail then it will need to
be replaced by a qualified engineer.
refrigerator lamp
lamp shade
Reversing the Door
The doors cannot be reversed.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125

Bauknecht SXBBE 930 WD 2 Guida utente

Categoria
Frigo-congelatori
Tipo
Guida utente