Ravelli RBV 8008 Use and Maintenance Manual

Marca: Ravelli

Modello: RBV 8008

Categoria: Stufe

Tipo: Use and Maintenance Manual

RBV 8008

RBV 8010

USE AND MAINTENANCE MANUAL

Dichiarazione di conformità UE

EU Declaration of Conformity

Declaration de Conformite UE

(DoC)

Il costruttore

The manufacturer

Le fabricant

Aico S.p.A.

Via A. Kupfer, 31

25036 Palazzolo s/O (Bs) – Italy

ph: +39 030 74 02 939, e-mail:info@ravelligroup.it

DICHIARA che la dichiarazione viene rilasciata sotto la propria responsabilità e si riferisce al seguente

prodotto:

DECLARES that the DoC is issued under our sole responsibility and belongs to the following product:

DÉCLARE que la declaration est délivré sous notre seule responsanilité et elle se refère au suivant produit:

Tipo di prodotto

Product type

Type de produit

Marchio

Trademark

Marque

Modello

Model

Modèle

Stufa a pellet

Pellet stove

Poêle à granulés de bois

Ravelli

RBV 8008, RBV 8010

L'oggetto della dichiarazione di cui sopra è conforme alla pertinente normativa di armonizzazione

dell'Unione:

The object of the declaration described above is in conformity with the relevant Union harmonisation

legislation:

L'objet de la déclaration décrit ci-dessus est conforme à l'harmonisation de l'Union concernant la

législation la directive:

2014/53/EU, RED

2011/65/EU, 2015/863/EU, RoHS

2009/125/EC Ecodesign

Sono state applicate le seguenti norme armonizzate e/o specifiche tecniche:

The following harmonised standards and/or technical specifications have been applied:

Les normes et les spécifications techniques harmonisées suivantes ont été appliquées:

EN 55014-1

EN 55014-2

EN 61000-3-2

EN 61000-3-3

EN 60335-1

EN 60335-2-102

EN 62233 EN 50581 (EU) 2015/1185 ETSI EN 300220-1

Palazzolo Sull'Oglio (BS), ITALY

21/06/2019

SCHEDA PRODOTTO

PRODUCT DATASHEET

FICHE DE PRODUIT

PRODUCTKAART

PRODUKTDATENBLATT

FICHA DEL PRODUTO

EU 2015/1186

Marca / Trademark / Marque / Merk / Marke / Marca Ravelli

Modello / Model / Modèle / Model / Modell / Modelo RBV 8008

Classe di efficienza energetica / Energy Efficiency class /Classe d’Efficacité Énergétique /

Energie-efficiëntieklasse / Energieeffizienzklasse / Clase de eficiencia energética A+

Potenza termica diretta / Direct thermal power / Puissance thermique directe / Directe

warmteafgifte / Direkte Wärmeleistung / Potencia calorífica directa 7,7 kW

Potenza termica indiretta / Indirect thermal power / Puissance thermique indirecte /

Indirecte warmteafgifte / Indirekte Wärmeleistung / Potencia calorífica indirecta --

Indice di efficienza energetica /Energy Efficiency Index / Indice de eficiencia energética /

Energie-efficiëntie-index / Energieeffizienzindex / Índice de eficiencia energética 126

Efficienza utile (Potenza nominale) / Useful efficiency (Nominal power) / Rendement utile

(puissance nominale) / Nuttig rendement (bij nominale) / Brennstoff-Energieeffizienz

(Nennwärmeleistung) / Eficiencia energética útil (potencia nominal)

90,5 %

Efficienza utile (Potenza ridotta) / Useful efficiency (Reduced power) / Rendement utile

(puissance minimale) / Nuttig rendement (bij minimale) / Brennstoff-Energieeffizienz

(Mindestlast) / Eficiencia energética útil (potencia minima)

93,1 %

Rispettare le avvertenze e le indicazioni di installazione e manutenzione periodica riportate nel manuale di

istruzioni. / Comply with the warnings and instructions concerning installation and routine maintenance provided in

the instruction manual. / Respecter les avertissements et les indications sur l’installation et l’entretien périodique

fournis dans le manuel d’instructions. / Neem de waarschuwingen en instructies voor installatie en periodiek

onderhoud in acht zoals aangegeven in de hoofdstukken van de gebruiksaanwijzing. / Beachten Sie die Warnungen

und Hinweise betreffend die Installation und regelmäßige Wartung in der Bedienungsanleitung. / Respete las

advertencias y las indicaciones de instalación y mantenimiento periódico, detalladas en los capítulos del manual de

instrucciones.

7,7

RBV 8008

PRODUCT DATASHEET

FICHA DO PRODUTO

ΔΕΛΤΙΟ ΠΡΟΪΟΝΤΟΣ

PRODUKTBLAD

KARTA PRODUKTU

PODATKOVNI LIST IZDELKA

EU 2015/1186

Trademark / Marca / Μάρκα / Mærke / Marka / Blagovna znamka Ravelli

Model / Modelo / Μοντέλο / Model / Model / Model RBV 8008

Energy Efficiency class / Classe de Eficiência Energética / Κατηγορία ενεργειακής απόδοσης /

Energiklasse / Klasa efektywności energetycznej / Razred energetske učinkovitosti A+

Direct thermal power / Potência calorífica direta / Άμεση θερμική ισχύς / Direkte

varmeydelse / Bezpośrednia moc produktu / Neposredna izhodna toplotna moč 7,7 kW

Indirect thermal power / Potência calorífica indireta / Έμμεση θερμική ισχύς / Indirekte

varmeydelse / Pośrednia moc produktu / Posredna izhodna toplotna moč --

Energy Efficiency Index / Índice de eficiência energética / Δείκτης ενεργειακής απόδοσης /

Indeks energieffektivitet / Wskaźnik efektywności energetycznej / Kazalo energetske

učinkovitosti

126

Useful efficiency (Nominal power) / Eficiência energética útil (potência nominal) / Ωφέλιμη

ενεργειακή απόδοση (ονομαστική ισχύ) / Virkningsgrad (nominel varmeydelse) / Sprawność

użytkowa (nominalnej mocy) / izkoristek energije (nazivni izhodni moči)

90,5 %

Useful efficiency (Reduced power) / Eficiência energética útil (potência mínima) / Ωφέλιμη

ενεργειακή απόδοση (ελάχιστο ισχύ) / Virkningsgrad (mindste varmeydelse) / Sprawność

użytkowa (minimalnym mocy) / izkoristek energije (nazivni izhodni moči)

93,1 %

Comply with the warnings and instructions concerning installation and routine maintenance provided in the

instruction manual. / Respeitar as advertências e as indicações de instalação e manutenção periódica referidas nos

capítulos do manual de instruções. / Τηρείτε τις προειδοποιήσεις και τις οδηγίες εγκατάστασης και περιοδικής

συντήρησης που αναφέρονται στα κεφάλαια του εγχειριδίου των οδηγιών. / Overhold advarslerne og angivelserne

for installation og vedligeholdelse, som angivet i kapitel i brugsvejledningen. / Należy przestrzegać ostrzeżeń i

wskazówek dotyczących instalacji i okresowej konserwacji podanych w rozdziałach w instrukcji obsługi. /

Upoštevajte opozorila in navodila za namestitev in redno vzdrževanje, navedena v poglavjih priročnika z navodili.

RBV 8008

7,7

SCHEDA PRODOTTO

PRODUCT DATASHEET

FICHE DE PRODUIT

PRODUCTKAART

PRODUKTDATENBLATT

FICHA DEL PRODUTO

EU 2015/1186

Marca / Trademark / Marque / Merk / Marke / Marca Ravelli

Modello / Model / Modèle / Model / Modell / Modelo RBV 8010

Classe di efficienza energetica / Energy Efficiency class /Classe d’Efficacité Énergétique /

Energie-efficiëntieklasse / Energieeffizienzklasse / Clase de eficiencia energética A+

Potenza termica diretta / Direct thermal power / Puissance thermique directe / Directe

warmteafgifte / Direkte Wärmeleistung / Potencia calorífica directa 9,0 kW

Potenza termica indiretta / Indirect thermal power / Puissance thermique indirecte /

Indirecte warmteafgifte / Indirekte Wärmeleistung / Potencia calorífica indirecta --

Indice di efficienza energetica /Energy Efficiency Index / Indice de eficiencia energética /

Energie-efficiëntie-index / Energieeffizienzindex / Índice de eficiencia energética 123

Efficienza utile (Potenza nominale) / Useful efficiency (Nominal power) / Rendement utile

(puissance nominale) / Nuttig rendement (bij nominale) / Brennstoff-Energieeffizienz

(Nennwärmeleistung) / Eficiencia energética útil (potencia nominal)

88 %

Efficienza utile (Potenza ridotta) / Useful efficiency (Reduced power) / Rendement utile

(puissance minimale) / Nuttig rendement (bij minimale) / Brennstoff-Energieeffizienz

(Mindestlast) / Eficiencia energética útil (potencia minima)

93,1 %

Rispettare le avvertenze e le indicazioni di installazione e manutenzione periodica riportate nel manuale di

istruzioni. / Comply with the warnings and instructions concerning installation and routine maintenance provided in

the instruction manual. / Respecter les avertissements et les indications sur l’installation et l’entretien périodique

fournis dans le manuel d’instructions. / Neem de waarschuwingen en instructies voor installatie en periodiek

onderhoud in acht zoals aangegeven in de hoofdstukken van de gebruiksaanwijzing. / Beachten Sie die Warnungen

und Hinweise betreffend die Installation und regelmäßige Wartung in der Bedienungsanleitung. / Respete las

advertencias y las indicaciones de instalación y mantenimiento periódico, detalladas en los capítulos del manual de

instrucciones.

9,0

RBV 8010

PRODUCT DATASHEET

FICHA DO PRODUTO

ΔΕΛΤΙΟ ΠΡΟΪΟΝΤΟΣ

PRODUKTBLAD

KARTA PRODUKTU

PODATKOVNI LIST IZDELKA

EU 2015/1186

Trademark / Marca / Μάρκα / Mærke / Marka / Blagovna znamka Ravelli

Model / Modelo / Μοντέλο / Model / Model / Model RBV 8010

Energy Efficiency class / Classe de Eficiência Energética / Κατηγορία ενεργειακής απόδοσης /

Energiklasse / Klasa efektywności energetycznej / Razred energetske učinkovitosti A+

Direct thermal power / Potência calorífica direta / Άμεση θερμική ισχύς / Direkte

varmeydelse / Bezpośrednia moc produktu / Neposredna izhodna toplotna moč 9,0 kW

Indirect thermal power / Potência calorífica indireta / Έμμεση θερμική ισχύς / Indirekte

varmeydelse / Pośrednia moc produktu / Posredna izhodna toplotna moč --

Energy Efficiency Index / Índice de eficiência energética / Δείκτης ενεργειακής απόδοσης /

Indeks energieffektivitet / Wskaźnik efektywności energetycznej / Kazalo energetske

učinkovitosti

123

Useful efficiency (Nominal power) / Eficiência energética útil (potência nominal) / Ωφέλιμη

ενεργειακή απόδοση (ονομαστική ισχύ) / Virkningsgrad (nominel varmeydelse) / Sprawność

użytkowa (nominalnej mocy) / izkoristek energije (nazivni izhodni moči)

88 %

Useful efficiency (Reduced power) / Eficiência energética útil (potência mínima) / Ωφέλιμη

ενεργειακή απόδοση (ελάχιστο ισχύ) / Virkningsgrad (mindste varmeydelse) / Sprawność

użytkowa (minimalnym mocy) / izkoristek energije (nazivni izhodni moči)

93,1 %

Comply with the warnings and instructions concerning installation and routine maintenance provided in the

instruction manual. / Respeitar as advertências e as indicações de instalação e manutenção periódica referidas nos

capítulos do manual de instruções. / Τηρείτε τις προειδοποιήσεις και τις οδηγίες εγκατάστασης και περιοδικής

συντήρησης που αναφέρονται στα κεφάλαια του εγχειριδίου των οδηγιών. / Overhold advarslerne og angivelserne

for installation og vedligeholdelse, som angivet i kapitel i brugsvejledningen. / Należy przestrzegać ostrzeżeń i

wskazówek dotyczących instalacji i okresowej konserwacji podanych w rozdziałach w instrukcji obsługi. /

Upoštevajte opozorila in navodila za namestitev in redno vzdrževanje, navedena v poglavjih priročnika z navodili.

RBV 8010

9,0

DECLARATION OF PERFORMANCE

Declaration of performance according to Regulation (EU) 305/2011

n. : 209CPR13.07

1. Unique identification code of the product type:

50018DR00, residential space heating appliance fired by wood pellets

EN 14785:2006

2. Type, batch or serial number or any other element allowing identification of the construction product as required under Art. 11(4):

RBV 8008

3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer:

Residential space heating appliance fired by wood pellets

4. Name, registered trade name or registered trademark and contact address of the manufacturer as required by Art. 11 (5):

Ravelli

Aico S.p.A.

Via A. Kupfer, 31

25036 Palazzolo s/O (Bs) Italia

5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2):

---

6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V:

System 3, System 4

7. In case of the declaration of performance concerning a construction product covered by a harmonised standard:

The notified laboratory IMQ (NB 0051) performed the determination of the product type on the basis of type testing under system 3 and issued

test report CS19-0039962-01

8. Declared performances:

Harmonized technical specification:

EN 14785:2006

Essential characteristics

Performance

Fire safety

Reaction to fire

Distance to combustible materials

Minimum distances (mm):

rear = 220

sides = 190

front = 1000

ceiling = --

floor = 300

Risk of burning fuel falling out

Pass

Emission of combustion products

(at 13% of O2)

Nominal heat output

CO 0,004 %

NOx 84 mg/Nm3

OGC 2 mg/Nm3

PM 14,6 mg/Nm3

Reduced heat output

CO 0,021 %

OGC 4 mg/Nm

Surface temperature

Pass

Electrical safety

Pass

Cleanability

Pass

Maximum operating pressure

Flue gas temperature at nominal heat output

132 °C

Mechanical resistance(to carry a chimney/flue)

NPD

Nominal heat output

7,7 kW

Room heating output

7,7 kW

Water heating output

Efficiency Ƞ

90,5 % Nominal heat output

93,1 % Reduced heat output

9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance

is issued under the sole responsibility of the manufacturer identified in point 4.

Signed for and on behalf of the manufacturer Claudio Mezzalira, Operation Manager

Place Palazzolo sull'Oglio Date 21/06/2019 Sign _______________

DECLARATION OF PERFORMANCE

Declaration of performance according to Regulation (EU) 305/2011

n. : 210CPR13.07

1. Unique identification code of the product type:

50016FR00, residential space heating appliance fired by wood pellets

EN 14785:2006

2. Type, batch or serial number or any other element allowing identification of the construction product as required under Art. 11(4):

RBV 8010

3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer:

Residential space heating appliance fired by wood pellets

4. Name, registered trade name or registered trademark and contact address of the manufacturer as required by Art. 11 (5):

Ravelli

Aico S.p.A.

Via A. Kupfer, 31

25036 Palazzolo s/O (Bs) Italia

5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2):

---

6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V:

System 3, System 4

7. In case of the declaration of performance concerning a construction product covered by a harmonised standard:

The notified laboratory IMQ (NB 0051) performed the determination of the product type on the basis of type testing under system 3 and issued

test report CS19-0039962-01

8. Declared performances:

Harmonized technical specification:

EN 14785:2006

Essential characteristics

Performance

Fire safety

Reaction to fire

Distance to combustible materials

Minimum distances (mm):

rear = 220

sides = 190

front = 1000

ceiling = --

floor = 300

Risk of burning fuel falling out

Pass

Emission of combustion products

(at 13% of O2)

Nominal heat output

CO 0,004 %

NOx 84 mg/Nm3

OGC 2 mg/Nm3

PM 14,6 mg/Nm3

Reduced heat output

CO 0,021 %

OGC 4 mg/Nm

Surface temperature

Pass

Electrical safety

Pass

Cleanability

Pass

Maximum operating pressure

Flue gas temperature at nominal heat output

157 °C

Mechanical resistance(to carry a chimney/flue)

NPD

Nominal heat output

9,0 kW

Room heating output

9,0 kW

Water heating output

Efficiency Ƞ

88 % Nominal heat output

93,1 % Reduced heat output

9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance

is issued under the sole responsibility of the manufacturer identified in point 4.

Signed for and on behalf of the manufacturer Claudio Mezzalira, Operation Manager

Place Palazzolo sull'Oglio Date 21/06/2019 Sign _______________

Preface

Dear Customer, We would like to thank you for choosing one of our stoves.

We invite you to read this manual carefully, before starting installation and use, so that you are able to benet from all of its

characteristics better and in full safety. It contains all necessary information for correct installation, start-up, operation, cleaning,

maintenance, etc.

Keep this manual in a suitable location, do not discard it without reading it.

Incorrect installation, maintenance and improper use of the product relieve the Manufacturer of all liability deriving from use of the

stove.

For further information and requirements contact your Ravelli-authorised Technical Assistance Centre.

including photocopies, recordings or any other storage system, for other purposes that are not exclusively use by the buyer’s staff,

without the express written consent of the Manufacturer.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.10

Rev.1 17/06/2021

Sommario

Preface ............................................................................................................................................................................................9

IDENTIFICATION ........................................................................................................................................11

Stove identication .....................................................................................................................................................................11

Manufacturer identication ........................................................................................................................................................11

Reference standards ...................................................................................................................................................................11

WARRANTY .................................................................................................................................................12

Certicate of warranty .................................................................................................................................................................12

Warranty conditions ....................................................................................................................................................................12

Registration of warranty .............................................................................................................................................................12

Info and problems .......................................................................................................................................................................12

GENERAL INFORMATION ...........................................................................................................................13

Supply and safe-keeping ...........................................................................................................................................................13

Language .....................................................................................................................................................................................13

Symbols used in the manual .....................................................................................................................................................13

SAFETY MEASURES ..............................................................................................................................................................13

General safety warnings ............................................................................................................................................................13

Residual risks .............................................................................................................................................................................14

DESCRIPTION OF THE STOVE ....................................................................................................................14

Intended use ...............................................................................................................................................................................14

Reasonably foreseeable incorrect use .....................................................................................................................................15

Obligations and forbidden actions ...........................................................................................................................................15

Obligations ...................................................................................................................................................................................15

Forbidden actions ......................................................................................................................................................................16

TECHNICAL CHARACTERISTICS ...............................................................................................................17

Characteristics of the fuel .........................................................................................................................................................17

Non-permitted fuels .....................................................................................................................................................................17

Measurements ............................................................................................................................................................................18

RBV 8008 - RBV 8010 technical diagram ..................................................................................................................................18

SHIPPING AND INSTALLATION .................................................................................................................19

Safety warnings for transportation and installation ...............................................................................................................19

Packaging ....................................................................................................................................................................................19

Set-ups for the smoke evacuation system ...............................................................................................................................20

Chimney ......................................................................................................................................................................................20

Chimney pot ................................................................................................................................................................................20

Requirements for the installation premises .............................................................................................................................21

CONNECTIONS ...........................................................................................................................................25

Testing and commissioning ......................................................................................................................................................25

Electric scheme ..........................................................................................................................................................................26

Controls and use .........................................................................................................................................................................27

Description of the display ..........................................................................................................................................................28

The display is subdivided into three parts: ..............................................................................................................................29

Time and date setting .................................................................................................................................................................29

PROCEDURES FOR USE .......................................................................................................................................................30

Checks prior to start-up .............................................................................................................................................................30

MAINTENANCE ........................................................................................................................................................................40

Safety warnings for maintenance .............................................................................................................................................40

Cleaning ......................................................................................................................................................................................40

Glass cleaning ............................................................................................................................................................................40

Cleaning the ash drawer ............................................................................................................................................................41

Smoke conduit cleaning ............................................................................................................................................................41

Smoke conduit cleaning ............................................................................................................................................................42

STORAGE AND DISPOSAL ...................................................................................................................................................43

Downtime (end of season) .........................................................................................................................................................43

Disposal .......................................................................................................................................................................................43

The stove does not work ............................................................................................................................................................43

Difcult lighting ...........................................................................................................................................................................43

Smoke leakage .............................................................................................................................................................................43

The glass gets dirty easily ..........................................................................................................................................................43

Use and maintenance manual RBV 8008 - RBV 8010

Pag.11

Rev.1 17/06/2021

IDENTIFICATION

Stove identification

Type of product PELLET STOVE

Model RBV 8008

RBV 8010

Manufacturer identification

Manufacturer

Aico S.p.A.

Via Consorzio Agrario, 3/D - 25032

Chiari (BS) - Italy

T. + 39 030 7402939

[email protected]

www.ravelligroup.it

Reference standards

The RBV 8008- RBV 8010 stoves that this manual refers to are compliant with the regulation:

305/2011 CONSTRUCTION PRODUCT REGULATION

And observe the following harmonised standard:

EN 14785; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 60335-1; EN 60335-2-102; EN 62233; EN 50581; ETSI

EN 300220-1

All local laws, including national and European standards, must be followed for the installation of the appliance.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.12

Rev.1 17/06/2021

WARRANTY

Certicate of warranty

Ravelli thanks you for the trust granted with the purchase of one of its products and invites the purchaser to:

• read the installation, use and maintenance instructions for the product;

• read the warranty conditions contained below.

Warranty conditions

The warranty for the Customer is acknowledged by the Dealer under the terms of law.

The Dealer acknowledges the warranty only if the product has not been tampered with and only if it has been installed in accordance with

the Manufacturer’s instructions.

The limited warranty covers manufacturing material defects, as long as the product has not broken sue to an incorrect use, negligence,

incorrect connection, tampering, installation errors.

The warranty becomes null and void even if only one requirement in this manual is not complied with.

The following are not covered by warranty:

• the combustion chamber refractory stones;

• the door glass;

• the gaskets;

• the paint job;

• the stainless steel or cast iron combustion grille;

• the resistance;

• the Majolica cladding;

• the aesthetic parts;

• any damages caused by unsuitable installation and/or use of the product and/or shortcomings on the part of the customer.

The use of poor quality pellet or any other unauthorised fuel may damage the product’s components, cause its warranty to be voided and

as a result eliminate the connected manufacturer liability.

It is therefore recommended to use good quality pellet that fulfils the requirements listed in the dedicated chapter.

All damages caused by transportation are not recognised, for this reason it is recommended to carefully check goods upon receipt,

immediately warning the reseller of any damage.

Registration of warranty

To activate the warranty, it is necessary to register the product on the Guarantee Portal on the website

www.ravelligroup.it, by entering your data and the purchase receipt.

Info and problems

Dealers authorised by Ravelli use a trained Technical Service Centre network to meet the Customer’s requirements. For any information

or request for assistance, please contact your Dealer or the Technical Service Centre.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.13

Rev.1 17/06/2021

GENERAL INFORMATION

Supply and safe-keeping

The manual is supplied in printed format.

Keep this manual safe, with the stove, so that the user can consult it easily.

The manual is an integral part, for safety reasons, therefore:

• it must be kept intact (in full). If it gets lost or ruined it is necessary to immediately ask for a new copy:

• it must be kept with the stove until demolition (including relocation, sale, rental, lease, etc....).

The Manufacturer will not be held liable for improper use of the stove and/or damage caused by operations that are not set forth in

the technical documentation.

Language

The original manual was written in Italian.

Any translations into additional languages must be carried out based on the original instructions.

The Manufacturer is liable for the information contained in the original instructions; the translations into different languages cannot be

fully veried therefore if any inconsistency arises it will be necessary to follow the text in the original language or contact our Technical

Documentation Ofce.

Symbols used in the manual

symbol denition

! IMPORTANT This symbol is used to identify particularly important information in the manual. This

information also concerns the safety of users involved in using the stove.

SAFETY MEASURES

General safety warnings

! IMPORTANT Read this instructions manual carefully

before stove installation and use. Failure to

observe the instructions set forth herein can

void the warranty and/or cause damage to

property and/or people.

Stove installation, system verification, operation

verification and initial calibration must be carried out

exclusively by qualied and authorised staff.

The stove needs to be connected to a single chimney that

guarantees the draught declared by the Manufacturer

and observes the installation regulations that apply to

the installation site.

The room where the stove is installed must have an air

intake.

The stove must not be used as an incinerator or differently

from its purpose

Do not use any fuel other than re pellet. It is strictly

forbidden to use liquid fuels.

It is prohibited to use the stove with the door or ash

drawer open or the glass broken.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.14

Rev.1 17/06/2021

Do not touch the hot surfaces of the stove without suitable

protective equipment, to avoid getting burned. When it is

running, the outer surfaces reach hot temperatures to

the touch.

It is forbidden to make unauthorised changes to the

stove.

Before using the stove it is necessary to know the position

and function of the controls.

If the chimney catches re you must call the re brigade.

Only use original spare parts. Any tampering and/or

replacements that have not been authorised by Ravelli

can pose a danger to the user’s safety.

In the event of particularly adverse weather conditions,

the safety systems could intervene and switch off the

stove. In any case, doe not disable the safety systems.

Residual risks

The stove was designed so as to guarantee the user’s essential

safety requirements.

Safety was integrated into the stove’s design and construction as

much as possible.

For every residual risk there is a description of the risk and the zone

or part that is applies to (unless the risk applies to the entire stove

overall). Procedure-related information is also provided on how to

avoid the risk and on the correct use of the personal protective

equipment required by and made compulsory by the Manufacturer.

DESCRIPTION OF THE STOVE

Intended use

The appliance in question is intended for:

operation allowed fuel forbidden setting

Radiant and

convection

heating, by

burning:

pellet Any fuel

other than

the permitted

ones.

Residential or

Commercial

The stove is designed and built to work safely if:

• it is installed by qualied staff according to the specic standards;

• it is used within the limits declared in the contract and herein;

• the operating manual procedures are followed;

Use and maintenance manual RBV 8008 - RBV 8010

Pag.15

Rev.1 17/06/2021

• routine maintenance is carried out according to the times and

methods set forth;

• extraordinary maintenance is promptly carried out when needed;

• safety devices are not removed and/or bypassed.

! IMPORTANT This stove must be intended for the use it

was specically designed for.

Reasonably foreseeable incorrect use

Reasonably foreseeable incorrect use is listed below:

• using the stove as an incinerator;

• using the stove with fuel other than pellet;

• using the stove with liquid fuels;

• using the stove with the door open and the ash drawer out.

Any use of the appliance other than intended must be preventively

authorised in writing by the Manufacturer. Without said written

authorisation, the use is considered “improper”. Any contractual

and non-contractual liability of the manufacturer is excluded for

damages to persons, animals or property due to installation and

maintenance adjustment errors and improper use.

Obligations and forbidden actions

Obligations

The user must:

• read this instructions manual before performing any operation

on the stove;

• the appliance must not be used by children under the age of 8 or

by people with reduced physical, sensorial or mental capacities

or without experience or without the necessary knowledge, and

always with supervision;

• do not use the stove improperly, i.e. for uses other than those

described in the “INTENDED USE” paragraph;

• it is strictly forbidden to use liquid fuels;

• keep objects that are not heat and/or ame-resistant at a safe

distance;

• only and exclusively load the stove with pellet with the

characteristics described herein;

• connect the stove to a regulation chimney;

• connect the stove to the extraction system by a pipe or outdoor

air intake;

• always perform maintenance with the stove off and cold;

• perform cleaning activities at the frequency stated herein;

• use original parts recommended by the Manufacturer.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.16

Rev.1 17/06/2021

Forbidden actions

The user must never:

• remove or change the safety devices without authorisation;

• perform operations or manoeuvres of his/her own initiative that

are not part of his/her job description, meaning that he/she might

jeopardise his/her own safety and that of others;

• use fuels other than pellet and those allowed for lighting;

• use the stove as an incinerator;

• use ammable or explosive substances near the stove during

operation;

• use the stove with the door open and/or with the glass ruined or

broken;

• close the combustion air and smoke outlet openings, whatsoever;

• use the stove to dry laundry;

• replace or change some of the stove parts.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.17

Rev.1 17/06/2021

TECHNICAL CHARACTERISTICS

RBV 8008 RBV 8010 U

smoke outlet pipe Ø 80 80 mm

Max. heating volume* 180 - 220 215 - 255 m3

Heating input reduced - nominal 3,2 - 8,5 3,2 - 10,2 kW

Heating output reduced - nominal 3,0 - 7,7 3,0 - 9,0 kW

Electrical consumption during nominal heat output* 0,68 - 1,8 0,68 - 2,15 W

Electrical connection 420 420 V - Hz

Hopper capacity 50 - 230 50 - 230 kg

Hourly consumption 20 20 Kg/h

Loading interval 11 - 30 9 - 30 h

Red. - Nom. Yield 93,1 - 90,5 93,1 - 88 %

CO at 13% of O20,021 - 0,004 0,021 - 0,004 %

Smoke ow 4,1 - 6,8 4,1 - 7,4 g/s

Minimum draft 10-0,1 10 - 0,1 Pa - mbar

Smoke temperature 71 - 132 71 - 157 °C

The data shown here is provided as a guideline and is not binding, and may change based on what type and quality of wood is used.

Ravelli reserves the right to make any changes in order to improve product performance.

* Heatable volume based on the requested power equal to 35 W/m³ and 55 W/m³

Characteristics of the fuel

Wood pellet is a fuel made of pressed wood sawdust, often recovered from processing scraps of carpentries. The material used

cannot contain any extraneous substance such as, for example, glue, lacquer or synthetic substances.

The sawdust, once it has been dried and cleaned from impurities, is pressed using a die with holes: as a result of high pressure, the

sawdust heats up by activating the natural wood binders; this way the pellet maintains its shape even without adding articial

substances.

Wood pellet density varies based on the type of wood and can exceed that of natural wood by 1.5 - 2 times.

The cylinders have a diameter of 6 mm and a variable length between 10 and 40 mm.

Their density is equal to approximately 650 kg/m3. Due to their low water content (< 10%) they have a high energy content.

The UNI EN ISO 17225-2:2014 standard (that replaces the EN PLUS standard) denes pellet quality by specifying three classes: A1,

A2 and B. Maintain fuels and other ammables at a suitable distance.

Ravelli recommends using wood pellet classied A1 and A2 according to the EN ISO 17225-2:2014 standard, or certied DIN PLUS

(more restrictive than the A1 class) or ONORM M 7135.

Pellet may be light or dark coloured, it is normally bagged into bags that show the name of the producer, the main characteristics

and classication according to standards.

! IMPORTANT Pellets must be transported and stored in a dry area. Upon contact with humidity they

swell and become unusable: it is therefore necessary to protect them from humidity, both

during transport and during storage.

Non-permitted fuels

We recommend not using the following materials as fuel:

• wood

• treated wood (painted, lacquered, glued wood etc.);

• sawdust or chips

• liquid fuel

• coal or other fossil fuels

• plastic and derivatives

• treated paper and cardboard

• waste

• fuels that release toxic or polluting substances

Using these fuels, on top of being forbidden due to the emission of polluting and harmful substances, causes the stove to deteriorate

more rapidly and debris to accumulate in the stove and in the smoke evacuation system, thereby reducing performance and safety.

The gases produced by these fuels are dangerous for the environment and for your health!

Using fuel that is not compliant with the above will void the warranty.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.18

Rev.1 17/06/2021

RBV 8008 - RBV 8010

technical diagram

The data shown below is provided as a guideline and is not binding, and may change based on what type of pellet is used. Ravelli reserves the right to make any changes

in order to improve product performance.

CHIMNEY EXTRACT ROUND

450 MM

885

800

666

704

619

986

USCITA 447

855

659

345

106 20

Ø48 (ENTRATA ARIA)

539

Ø80 (USCITA FUMI)

655

865

560

685

865

560

ALLOGGIAMENTO PER INSTALLAZIONE

SENZA SUPPORTO CAMINO E CON

CORNICE SENZA PROFILO INFERIORE

ALLOGGIAMENTO PER INSTALLAZIONE CON

SUPPORTO CAMINO E CON CORNICE DI

COMPENSAZIONE COMPLETA

Via Kupfer,31 25036 Palazzolo S/O

- BRESCIA - ITALY

RBV 8008

CODICE DISEGNO / REV

AICO S.p.a.

TOLLERANZE GENERALI SECONDO LA CLASSE UNI EN 22768-mK

GENERAL TOLERANCES AS PER UNI EN 22768-mK

STATO

FORMATO

TUTTE LE QUOTE MANCANTI SONO DA

RICAVARE DAL MODELLO 3D

ALL THE MISSING MEASUREMENTS CAN

BE FOUND IN THE 3D MODEL

SCALA

DISEGNATO

MASSA

CONTROLLATO

DATA

GRUPPO DI APPARTENENZA

TIPOLOGIA

FOGLIO

1:10

50018DR00

20/03/2019

S.Tanzi

Proprietà della Società

AICO S.p.A.

Senza autorizzazione scritta della stessa, il presente

disegno non potrà essere utilizzato per la costruzione dell’oggetto rappresentato né venire

comunicato a terzi o riprodotto. La Società proprietaria tutela i propri diritti a rigore di legge.

All proprietary rights reserved by

AICO S.p.A.

This drawing shall not be reproduced or in any

way utilized for the manufacture of the component of unit herein illustrated and must not be

released to other parties without written consent. Any infringement will be legally pursued.

129.99 Kg

DENOMINAZIONE

1 / 2

885

800

666

704

619

986

USCITA 447

855

659

345

106 20

Ø48 (ENTRATA ARIA)

539

Ø80 (USCITA FUMI)

655

865

560

685

865

560

ALLOGGIAMENTO PER INSTALLAZIONE

SENZA SUPPORTO CAMINO E CON

CORNICE SENZA PROFILO INFERIORE

ALLOGGIAMENTO PER INSTALLAZIONE CON

SUPPORTO CAMINO E CON CORNICE DI

COMPENSAZIONE COMPLETA

Via Kupfer,31 25036 Palazzolo S/O

- BRESCIA - ITALY

RBV 8008

CODICE DISEGNO / REV

AICO S.p.a.

TOLLERANZE GENERALI SECONDO LA CLASSE UNI EN 22768-mK

GENERAL TOLERANCES AS PER UNI EN 22768-mK

STATO

FORMATO

TUTTE LE QUOTE MANCANTI SONO DA

RICAVARE DAL MODELLO 3D

ALL THE MISSING MEASUREMENTS CAN

BE FOUND IN THE 3D MODEL

SCALA

DISEGNATO

MASSA

CONTROLLATO

DATA

GRUPPO DI APPARTENENZA

TIPOLOGIA

FOGLIO

1:10

50018DR00

20/03/2019

S.Tanzi

Proprietà della Società

AICO S.p.A.

Senza autorizzazione scritta della stessa, il presente

disegno non potrà essere utilizzato per la costruzione dell’oggetto rappresentato né venire

comunicato a terzi o riprodotto. La Società proprietaria tutela i propri diritti a rigore di legge.

All proprietary rights reserved by

AICO S.p.A.

This drawing shall not be reproduced or in any

way utilized for the manufacture of the component of unit herein illustrated and must not be

released to other parties without written consent. Any infringement will be legally pursued.

129.99 Kg

DENOMINAZIONE

1 / 2

Ø80 (SMOKE OUTLET)

Ø48 (AIR INLET)

Measurements

RBV 8008 RBV 8010 Unit of measurement

Height 704 704 mm

Width 885 885 mm

Depth 986 986 mm

Empty weight 130 130 kg

800

885

704

666

619

986

USCITA 447

539

80 USCITA FUMI

345

106

48 ENTRATA ARIA

659

855

560

865

685

560

655

865

ALLOGGIAMENTO PER INSTALLAZIONE

SENZA SUPPORTO CAMINO E CON

CORNICE SENZA PROFILO INFERIORE

ALLOGGIAMENTO PER INSTALLAZIONE CON

SUPPORTO CAMINO E CON CORNICE DI

COMPENSAZIONE COMPLETA

Via Kupfer,31 25036 Palazzolo S/O

- BRESCIA - ITALY

RBV 8010

CODICE DISEGNO / REV

AICO S.p.a.

TOLLERANZE GENERALI SECONDO LA CLASSE UNI EN 22768-mK

GENERAL TOLERANCES AS PER UNI EN 22768-mK

STATO

FORMATO

TUTTE LE QUOTE MANCANTI SONO DA

RICAVARE DAL MODELLO 3D

ALL THE MISSING MEASUREMENTS CAN

BE FOUND IN THE 3D MODEL

SCALA

DISEGNATO

MASSA

CONTROLLATO

DATA

GRUPPO DI APPARTENENZA

TIPOLOGIA

FOGLIO

1:10

50016FR00

08/11/2018

G.Tengattini

Proprietà della Società

AICO S.p.A.

Senza autorizzazione scritta della stessa, il presente

disegno non potrà essere utilizzato per la costruzione dell’oggetto rappresentato né venire

comunicato a terzi o riprodotto. La Società proprietaria tutela i propri diritti a rigore di legge.

All proprietary rights reserved by

AICO S.p.A.

This drawing shall not be reproduced or in any

way utilized for the manufacture of the component of unit herein illustrated and must not be

released to other parties without written consent. Any infringement will be legally pursued.

129.987 Kg

DENOMINAZIONE

1 / 2

Use and maintenance manual RBV 8008 - RBV 8010

Pag.19

Rev.1 17/06/2021

SHIPPING AND INSTALLATION

Safety warnings for transportation and installation

! IMPORTANT The stove must be installed by a qualied technician, who must issue a declaration of

conformity of the system to the purchaser, taking full responsibility for stove installation

and correct operation.

! IMPORTANT The stove installation site must be chosen so that the generated heat can spread evenly

throughout the rooms that you wish to heat.

The stove needs to be connected to a single chimney that guarantees the draught declared by the Manufacturer

and observes the installation regulations that apply to the installation site.

The room where the stove is installed must have an air intake.

The air vent must be installed in such a way that it can not be blocked.

The Manufacturer will not be held liable for installation that is not compliant with the laws in force, incorrect air circulation in the rooms

and inappropriate use of the appliance.

In particular, it is necessary:

• that the appliance be connected to a smoke evacuation system duly sized to guarantee the draught declared by the Manufacturer,

that is tight and observes the distances from ammable materials;

• that there is a suitable combustion air intake in compliance with the type of installed product;

• that other installed combustion appliances or devices do not create a vacuum in the room where the stove is installed;

• that the safety distances from ammable materials are observed.

Verication of system compatibility has a priority over any other assembly or installation operation.

! IMPORTANT Local administrative regulations and particular requirements of the authorities pertaining

to the installation of combustion appliances, the air intake and the smoke evacuation

system, may vary based on region or nation. Check with your local authorities if there are

stricter laws than set forth herein.

Packaging

When the stove arrives, check:

• that it is the model you ordered;

• that it has not been damaged during shipping.

Any complaints must be reported to the deliveryman (also on the delivery note) upon receival.

Check the capacity of the oor before handling and positioning the stove.

To handle the stove in its packaging, follow the procedure below:

1 Position the pallet truck forks in the slots under the wooden pallet.

2 Lift slowly.

3 Place the stove near the chosen location for installation.

The stove always needs to be handled vertically. Take extra care to protect the door and its glass against

mechanical impact that could jeopardise their integrity

To unpack the stove, follow the procedure described below:

1 Cut the straps and remove the wooden reinforcement frame resting on the box

2 Slowly lift the cardboard box

3 Remove any bubble-wrap or similar

4 Remove the stove from the pallet and position the appliance in the chosen location, ensuring that it is compliant with

the directions.

! IMPORTANT The end user is responsible for disposing of the packaging in accordance with the laws in

force in the country of installation.

Use and maintenance manual RBV 8008 - RBV 8010

Pag.20

Rev.1 17/06/2021

Set-ups for the smoke evacuation system

Be careful when building the smoke evacuation system and observe the regulations in force in the country where

the stove is installed.

! IMPORTANT The Manufacturer will not be held liable for incorrectly sized and non-regulation smoke

evacuation systems.

Smoke ducts and ttings

The term smoke duct indicates all ducts that connect the combustion equipment to the chimney.

The following requirements need to be applied:

• observe product standard EN 1856-2;

• the horizontal sections must have a minimum slope of 3% upwards;

• the length of the horizontal section must be as minimum as possible, and its projection on the horizontal plane must not exceed

2 metres;

• changes in direction must not have an angle of more than 90° (45° bends are recommended);

• the number of direction changes, including the one necessary for insertion into the chimney, must not exceed 3;

• the cross section must have a constant diameter, the same from where it exits the rebox up to the tting into the chimney;

• it is forbidden to use exible metal and bre cement pipes;

• smoke ducts must not cross rooms where the installation of combustion equipment is prohibited.

In any case, the smoke ducts must be sealed against combustion products and condensation, as well as insulated if they lead outside

of the installation room.

Installing manual draught adjustment devices is not allowed.

! IMPORTANT Creating an initial straight vertical smoke duct section of at least 1 m to ensure proper

smoke ejection is mandatory.

Chimney

The chimney is a particularly important element for correct stove operation.

The chimney must be sized so as to guarantee the draught declared by the Manufacturer.

Do not connect the stove to a collective chimney.

The chimney must be built applying the following regulations:

• it must observe product standard EN 1856-1;

• it must be made of materials that are suitable to guarantee resistance against normal mechanical, chemical and thermal stress

and be correctly thermally insulated to limit the formation of condensation;

• it must be mainly vertical and not feature any bottlenecks along its entire length;

• it must be correctly spaced with an air gap and insulated from ammable materials;

• there must be a maximum of 2 changes in direction and angles must not exceed 45°;

• the chimney inside the home, however, must be insulated and can be inserted into a skylight shaft, as long as it respects

standards regarding placing inside a tube;

• the smoke conduit must be connected to the chimney using a "T" tting with an inspection collection chamber for combustion

residue and especially for collecting condensation.

! IMPORTANT It is necessary to check the safety distances that need to be observed when there are

flammable materials and the type of insulating material that needs to be used is on the

chimney data plate.

Use watertight pipes with silicone seals.

It is forbidden to use the discharge mounted directly on the wall or directed towards indoor spaces and any other

type of discharge that is not set forth by the regulation in force in the country of installation (Note: in Italy only

roof-discharge is allowed).

Chimney pot

The chimney pot, i.e. the top end of the chimney, must full the following characteristics:

• the cross-section of the smoke outlet must be at least twice the internal cross-section of the chimney;

• it must stop water or snow from getting in;

• make sure the smoke is taken away even when there is wind (wind resistant chimney pot);

• the outlet height must be outside of the reux zone (refer to national and local regulations to calculate the reux zone);

• it must always be built at a distance from antennas or dishes, it must never be used as support.

La pagina sta caricando ...

Ravelli RBV 8008 Use and Maintenance Manual

Marca: Ravelli

Modello: RBV 8008

Categoria: Stufe

Tipo: Use and Maintenance Manual

Scarica il pdf

rapporto

in altre lingue

English: Ravelli RBV 8008

Documenti correlati

Altri documenti

Lovibond Turbidimeter TB 300 IR Manuale utente