ESAB LTR 255 Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente
Valid for serial no. 745--xxx--xxxx, 842--xxx--xxxx,
011--xxx--xxxx
0457 326127 041101
Power Tig 255
LTR 255
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 11..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 5.......................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÄÀÍÍÛÅ 6.........................................
4 ÝÊÑÏËÓÀÒÀÖÈß 7..................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 7..................................................
5 ÐÀÁÎÒÀ ÓÑ ÒÀÍÎÂÊÈ 8..............................................
5.1 Ïîäæèã ìåòîäîì îòðûâà äóãè 9.............................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 10................................
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 10......................................
ÑÕÅÌÀ 19..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 20.....................................................
ÑÏÈÑÎÊ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 21........................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 22...........................
bt18d2r -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎ ËÍÈÒÅËß ÐÀÁÎ Ò, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇà ÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëàîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ î ò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñî áëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññòîÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìîæíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæåíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êî æó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñòîðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõ à
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀ
ÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íî ìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ðàáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ òðóá.
ÂÍÈÌÀÍÈÅ!
Âíèìàíèå!
Ýòî óñòðîéñòâî ïðåäíàçíà÷åíî èñê ëþ÷èòåëüíî äëÿ ýëåêòðîäóãîâîé ñâàðêè!
RU
bt18d2r -- 5 --
2 ÂÂÅÄÅÍÈÅ
LTR 255 - ñâàðî÷íûé âûïðÿìèòåëü, èíâåðòîðíîãî òèïà, ïðåäíàçíà÷åííûé ä ëÿ
ñâàðêè íåïëàâÿùèìñÿ ýëåêòðîäîì â ñðåäå çàùèòíûõ ãàçîâ (TIG), à òàêæå ä ëÿ
ðó÷íîé äóãîâîé ñâàðêè(MMA).
Ïðèìåíåíèå èíâåðòîðíîé òåõíîëîãèè ïîçâîëèëî ñíèçèòü ïîòðåáëÿåìóþ
ýíåðãèþ, óìåíüøèòü âåñ è ãàáàðèòû.
Òàêæå ïðèìåíåíèå ñîâðåìåííîé ýëåêòðîíèêè ïîçâîëèëî, íàðÿäó ñ äðóãèìè
ïðåèìóùåñòâàìè, îáåñïå÷èòü áûñòðóþ íàñòðîéêó ïðîöåññà è
âûñîêîêà÷ åñòâåííóþ ñâàðêó.
LTR 255 âûïóñêàþòñÿ â äâóõ èñïîëíåíèÿõ: c öåíòðàëüíûì òèïîì ðàçúåìà è
ðàçú¸ìîì òèïà ÎÊÑ äëÿ ïîäñîåäèíåíèÿ ãîðåëêè TIG.
 êîìïëåêò ïîñòàâêè LTR 255 âõîäèò: ñåòåâîãî êàáåëÿ, âîçâðàòíîãî
êàáåëÿ, ãàçîâûé øëàíã ñ çàæèìàìè.
Óñòàíîâêè ñ öåíòðàëüíûì ðàçú¸ìîì èìåþò ñïåöèàëüíóþ çàùèò ó ðàçú¸ìà,
ïðåäîõðàíÿþùåå åãî îò óäàðîâ. Êàê äîïîëíèòåëüíûå ïðèíàäëåæíîñòü ìîæåò
ïîñòàâëÿòüñÿ ñïåöèà ëüíàÿ ôèã óðíàÿ ðóêîÿòêà, ñëóæàùàÿ îäíîâðåìåííî
êàðêàñîì ä ëÿ íàìîòêè êàáåëÿ è äîïîëíèòåëüíîé çàùèòîé ïàíåëè ïðèáîðîâ.
Äëÿ òðàíñïîðòèðîâêè ïðåäóñìîòðåíî 2 âèäà òåëåæåê ñ ïëîùà äêîé äëÿ
ãàçîâîãî áàëëîíà è ñèñòåìû âîäÿíîãî îõëàæäåíèÿ. .
Àêñåññóàð² îò äëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 22.
RU
bt18d2r -- 6 --
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÄÀÍÍÛÅ
LTR 255
Ìàêñèìàëüíàÿ äîïóñòèìàÿ íàãðóçêà
ïðè ÏÂ 35 % , TIG 250 A/20 V
ïðè ÏÂ 35 % , MMA 250 A/30 V
ïðè ÏÂ 60 % 180A/27V
ïðè ÏÂ 100 % 140A/26V
Äèàïàçîí ðåãóëèðîâàíèÿ òîêà ñâàðêè, TIG 4-250 A
MMA 4-250 A
Âðåìÿ íàðàñòàíèÿ òîêà, íàñòðîéêà íà ýë. ïëàòå 0-5 ñåê
Âðåìÿ ñïàäà òîêà 0,1-10 ñåê
Ïðåäâàðèòåëüíàÿïðîäóâêàãàçà,íàñòðîéêàíàýë.
ïëàòå
0-5 ñåê
Ïðîäóâêà ïîñëå ñâàðêè 5-20 ñåê
Íàïðÿæåíèå õîëîñòîãî õîäà 70-90 V
Ìîùíîñòü õîëîñòîãî õîäà 50 W
Ïîëåçíàÿ ìîùíîñòü, P
ïðè ìàêñ. òîêå MMA 9,3 kW
Ïîòðåáëÿåìàÿ ìîùíîñòü, S
ïðè ìàêñ. òîêå MMA 14, 67 kVa
Êî ýôôèöèåíò ìîùíîñòè ïðè ìàêñ. òîêå MMA 0,63
Ê.Ï.Ä, ïðè ìàêñ. òîêå MMA 0,80
Ïðåäîõðàíèòåëü 16 A
Ñå÷åíèå ñåòåâîãî êàáåëÿ 4x1,5ìì
2
Ãàáàðèòû, lxwxh 515x285x415ìì
Âåñ 24 kg
Êëàññ ïðèìåíåíèÿ
Ê ëàññ çàùèòû IP 23
Äàííûé âûïðÿìèòåëü óäîâëåòâîðÿåò òðåáîâàíèÿì ñòàíäàðòà IEC 974-1
Ñå÷åíèÿ êàáåëåé - ñîãëàñíî øâåäñêèõ ñòàíäàðòîâ.
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ %%) äåñÿòèìèíó òíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðîòîêîì.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâ åðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî ä ëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
RU
bt18d2r -- 7 --
ÊÑÏËÓÀÒÀÖÈß
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
Íàïðÿæåíèå ñåòè 400 Â ±10 %, 3-ôàçíûé
×àñòîòà ñåòè 50-60 Hz
Ïðåäîõðàíèòåëü 16 A
Ñå÷åíèå ñåòåâîãî êàáåëÿ 4X1,5 ìì
2
Ñå÷åíèå ñâàðî÷íîãî êàáåëÿ 35ìì
2
LTR 255 - ñíàáæåí óñòðîéñòâîì êîìïåíñàöèè êîëåáàíèé ïèòàþùåé ñåòè, ò.å.
ïðè êîëåáàíèÿõ íàïðÿæåíèÿ ñåòè ±10 % êîëåáàíèå â ñâàðî÷íîé ñåòè íå
ïðåâûñÿò ±0,2 %.
Ïðè ïðèìåíåíèè ñâàðî÷íûõ êàáåëåé áîëüøîé äëèíû ðåêîìåíäóåòñÿ
óâåëè÷èòü åãî ñå÷åíèå.
1. Óñòàíîâèòå âûïðÿìèòåëü â óäîáíîì äëÿ ðàáîòû ìåñòå è óáåäèòåñü, ÷òî íå ïåðåêðûò
äîñòóï âîçäóõà â âåíòèëÿöèîííûå ñå÷åíèÿ
2. Óáåäèòåñü â òîì, ÷òî âûïðÿìèòåëü ïîäñîåäèíåí ê ïèòàþùåé ñåòè ñîîòâåòñòâóþùåãî
íàïðÿæåíèÿ. Çàçåìëåíèå ñîãëàñíî äåéñòâóþùèì íîðìàì.
3. Ïîäñîåäèíèòå çàùèòíûé ãàç
4. Ïîäêëþ÷èòå ãîðåëêó TIG, âîçâðàòíûé êàáåëü è ñâàðî÷íûé êàáåëü äëÿ ÌÌÀ.
Òåïåðü óñòàíîâêà ãîòîâà ê ðàáîòå..
4.1 Èíñòðóêöèè ïî ïîäúåìó
RU
bt18d2r -- 8 --
5 ÐÀÁÎÒÀ ÓÑÒÀÍÎÂÊÈ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
1 Âûêëþ÷àòåëü ñåòè Âêëûêë 8 Ðà çú¸ì ïóëüòà äèñòàíöèîííîãî
óïðàâëåíèÿ
2 Æåëòàÿ êîíòðîëüíàÿ ëàìïà 9 Âîçäóøíûé ôèëüòð
3 Áåëàÿ êîíòðîëüíàÿ ëàìïà 10 Ãà ç îâ û é ø ò ó ö å ð
4 Ðó÷êà ðåãóëèðîâêè âðåìåíè íàðàñòàíèÿ -
ñïàäà òîêà
11 Ðàçú¸ì ãîðåëêè TIG
5 Ïåðåêëþ÷àòåëü:Ïîäæèã îòðûâîì/
Â×-ïîäæèã/MMA
12 Ð àçú¸ì âîçâðàòíîãî êàáåëÿ
6 Ðó÷êàðåãóëÿòîðàòîêà 13 Ïåðåêëþ÷àòåëü ðåæèìà ðàáîòà êíîïêè
âêëþ÷åíèÿ (2/4-õ òàêòíûé)
7 Ðó÷êà ïðîäóâêè çàùèòíîãî ãàçà ïîñëå
ñâàðêè
14 Ïåðåêëþ÷àòåëü ïóëüòà ÄÓ
Ïðè ñâàðêå ÌÌÀ ñâàðî÷íûé è âîçâðàòíûé êàáåëü ïîäêëþ÷àþòñÿ ê ðàçú¸ìàì
12 è 15.
S ×åðåç ðàçú¸ì ÄÓ ñ ïóëüòà ìîæåò âåñòèñü ðåãóëèðîâêà âåëè÷èíû
ñâàðî÷íîãî òîêà êàê ï ðè ñâàðêå TIG, òàê è ïðè MMA ñâàðêå.
S Ïåðåêëþ÷àòåëü àêòèâèðóåò ðåæèì ðàáîòû ÄÓ
S Ïðèìåíåíèå ïóëüòà ÄÓ PHA5 äà¸ò âîçìîæíîñòü âåñòè ñâàðêó TIG â
èìïóëüñíîì ðåæèìå.
Ïðè âêëþ÷åíèè ñåòåâîãî âûêëþ÷àò å ëÿ çàãîðàåòñÿ áåëàÿ êîíòðîëüíàÿ ëàìïà íà
ïåðåäíåé ïàíåëè.
Äëÿ çàùèòû î ò ïåðåãðåâà âûïðÿìèòåëü èìååò âñòðîåííûé òåðìîñòàò,
ñðàáàòûâàþùèé ïðè ïðåâûøåíèè òåìïåðàòóðû âûøå äîïóñòèìîé.
Ïðè ýòîì îáåñòî÷èâàþòñÿ ñâàðî÷íûå êàáåëè è çàãîðàåòñÿ æ¸ëòàÿ êîíòðîëüíàÿ
ëàìïà. Ïðè ïîíèæåíèè òåìïåðàòóðû òåðìîñòàò àâòîìàòè÷åñêè âêëþ÷àåò
âûïðÿìèòåëü.
RU
bt18d2r -- 9 --
Ðåæèì = Â×-ïîäæèãà
Ïðè íàæàòèè êíîïêè ãîðåëêè íà÷èíàåòñÿ ïðåäâàðèòåëüíàÿ ïðîäóâêà
çàùèòíîãî ãàçà. Äàëåå çà ñ÷¸ò âûñîêî÷àñòîòíîãî (Â×) áëîêà íàñòóïàåò ïðîáîé
äóãîâîã î ïðîìåæóòêà ìåæäó ýëåêòðîäîì è èçäåëèåì, âñëåäñòâèå ÷åãî ãàç
èîíèçèðóåòñÿ è âîçáóæäàåò ñ ÿ äóãà. Ïîñëå ñòàáèëèçàöèè ã îðåíèÿ äóãè áëîê Â×
àâòîìàòè÷åñêè îòêëþ÷àåòñÿ.
Ðåæèì = Ðó÷íîé äóãîâîé ñâàðêè(MMA).
 ýòîì ðåæèìå óñòàíîâêà ãîòîâà ê ñâàðêå ÌÌÀ. Ðåæèìû ïîäæèãà íå
ôóíêöèîíèðóþò, íî àêòèâèðóåòñÿ ôóíêöèÿ Hot-start, äàþùàÿ ïîâûøåííûé
èìïóëüñ òîêà â íà÷à ëüíûé ìîìåíò, ÷òî îáëåã÷àåò âîçáóæäåíèå äóãè..
Ðåæèì 2/4-òàêòíîé ðàáîòû êíîïêè âêëþ÷åíèÿ ãîðåëêè
2 - òàêòíûé: ïðè íàæàòèè êíîïêè ãîðåëêè äóãà âîçáóæäàåòñÿ è ïðè îòæàòèè
ãàñíåò.
4- òàêòíûé: ïðè íàæàòèè/îòæàòèè êíîïêè ãîðåëêè äóãà âîçáóæäàåòñÿ è ïðè
íàæàòèè/îòæàòèè ãàñíåò. Íåò íåîáõîäèìîñòè äåðæàòü êíîïêó íàæàòîé íà
ïðîòÿæåíèè âñåãî öèê ëà ñâàðêè.
5.1 Ïîäæèã ìåòîäîì î òðûâà äóãè
Ðåæèì = Lift-Arc (ï îäæèãà îòðûâîì äóãè).
Ïðè ýòîì ñïîñîáå âîëüôðàìîâûé ýëåêòðîä ðàñïîëàãàåòñÿ íà èçäåëèè â ìåñòå
íà÷àëà ñâàðêè, ïîñëå ÷åãî íàæèìàåòñÿ êíîïêà âêëþ÷åíèÿ ãîðåëêè è ýëåêòðîä
îòðûâàåò ñÿ îò èçäåëèÿ, âîçáóæäàÿ äóãó.
Ïëàâíîå íàðàñòàíèå è ñïà ä òîêà â íà÷àëå è êîíöå öèêëà ñâàðêè ïðîèñõîäèò
ñîãëàñíî óñòàíîâëåííûì çíà÷åíèÿì..
Ðàñïîëîæèòå ýëåêòðîä Íàæìèòå êíîïêó ãîðåëêè.
íà èçäåëèè.
Íàêëîíèòå íåìíîãî ýëåêòðîä, Äëÿ ïðåêðàùåíèÿ
îòîðâèòå åãî î ò èçäåëèÿ äëÿ ñâàðêè îòïóñòèòå êíîïêó
âîçáóæäåíèÿ äóãè ãîðåëêè
RU
bt07d109
Ñíÿòèå ôèëüòðà
bt18d2r -- 1 0 --
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïðèìå÷àíèå:
à àðàíìèéíú²å îáÿçàìåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïðîèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
 ïðèíöèïå LTR 255 íå òðåáóåò
ñïåöèà ëüíîãî îáñëóæèâàíèÿ.
Îáû÷íî äîñòàòî÷íî ïðîäóâàòü
óñòàíîâêó ÷èñòûì ñæàòûì
âîçäóõîì è î÷èùàòü âîçäóøíûé
ôèëüòð. Åñëè óñòàíîâêà
ýêñïëóàòèðóå òñÿ â î÷åíü
çàãðÿçíåííûõ óñëîâèÿõ - ôèëüòð
íà äî î÷èùàòü êàê ìîæíî ÷àùå.
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 1 --
TOCe
1 DIRECTIVE 12........................................................
2SAFETY 12...........................................................
3 INTRODUCTION 13...................................................
4 TECHNICAL DATA 14.................................................
5 INSTALLATION 15....................................................
5.1 Lifting instructions 15.........................................................
6 OPERATION 16.......................................................
6.1 LIFTARC 17.................................................................
7 MAINTENANCE 18....................................................
8 ORDERING OF SPARE PARTS 18......................................
DIAGRAM 19............................................................
ORDERING NUMBER 20.................................................
SPARE PARTS LIST 21...................................................
ACCESSORIES 22.......................................................
-- 1 2 --
bt18d12e
1DIRECTIVE
DECLARATION OF CONFORMITY
Esab Welding Equipment AB, 695 81 Laxå, Sweden, gives its unreserved guarantee
that welding power source LTR 255 from serial number 745 complies with standard
EN 60974--1, in accordance with the requirements of directive (73/23/EEA) and ad-
dendum (93/68/EEA) and standard EN 50199 in accordance with the requirements
of directive (89/336/EEA) and addendum (93/68/EEA).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Paul Karlsson
Managing Director
Esab Welding Equipment AB
695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 12336
Laxå 97--10--30
2SAFETY
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU -
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is safe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect your ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide yo u with all necessary welding p rotectio n and accessories.
GB
-- 1 3 --
bt18d12e
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
3 INTRODUCTION
LTR 255 is a rectifier based on inverter technology and designed for TIG welding
and welding with coated electrodes.
Inverter technology contributes to low energy consumption, low weight and compact
dimensions.
The advanced electronic design permits rapid regulation and first class welding
characteristics.
LTR 255 is available in two versions, one with a central socket and one with an OKC
socket for connecting a TIG torch.
LTR 255 is supplied complete with 5 m etre mains cable, 5 metre return cable,
gas hose and hose clamps.
Versions with a central socket are also supplied with a protective cover to protect
connections from slag.
An optional handle bracket can be fitted to the machine for winding up cables and to
protect the control panel.
Two different trolleys are available to facilitate transport with a gas bottle and cooling
unit.
ESAB’s accessories for the product can be found on page 22.
GB
-- 1 4 --
bt18d12e
4 TECHNICAL DATA
LTR 255
Permittedloadat
35 % duty cycle, T IG 250 A/20 V
35 % duty cycle, MMA 250 A/30 V
60 % duty cycle 180 A/27 V
100 % duty cycle 140 A/26 V
Setting range, TIG 5--250 A
MMA 5--250 A
Slope up, adjustable on circuit board 0-- 5 s
Slope down 0,1--10 s
Gas pre-- flow ,adjustable on
circuit board
0-- 5 s
Gas post--flow 5-- 20 s
Open --circuit voltage 70--90 V
Open--circuit power 50 W
Useful Power, P
at max current MMA 9,3 kW
Apparent Power, S
at max current MMA 14,67 kVa
Power factor , at max current MMA 0,63
Efficiency, at max current MMA 0,80
Fuse, slow rupture 16 A
Mains cable,cross section 4x1,5 mm
2
Dimension lxbxh 515x285x415mm
Weight 24 kg
Application class
Class of enclosures IP 23
The welding power sources comply with the requirements set out in IEC 974--1
Cable areas acc. to Swedish regulations.
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
GB
-- 1 5 --
bt18d12e
5 I NSTALLATION
The installatio n must be executed b y a professional.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’s responsibility to take adequate precautions.
Mains voltage 400 V ¦10 %, 3--phase
Mains frequency 50--60 Hz
Fuse, slow rupture 16 A
Mains cable, cross section 4X1,5 mm
2
Welding cable, cross section 35mm
2
LTR 255 are equipped with mains voltage compensation, which means that a ¦10 %
variation in the mains voltage only results in a ¦0,2 % variation in the welding
current.
To reduce the voltage drop when using a long cable it can be advisable to select a
heavier cable cross section.
1. Place the equipment in a suitable place and make sure the rectifier is not covered or set-up so
that cooling is prevented.
2. Make sure the machine is connected to the correct mains voltage.
Earth according to applicable directives.
3. Connect the shielding gas.
4. Connect the TIG torch and the return cable or the MMA welding cables.
The machine is now ready for welding.
5.1 Lifting instructions
GB
-- 1 6 --
bt18d12e
6OPERATION
General safety regulations for the handling of the equipment can be found on
page 12. Read through before you start using the equipment!
1 Mains power switch on/off 8 Remote control connection
2 Yellow indicating lamp 9 Dust filter
3 White indicating lamp 10 Gas nipple (connection of gas cylinder)
4 Slope--down time 11 Connection for TIG torch
5 Lift--Arc/HF--unit/MMA 12 Connection for return cable when TIG welding
6 Current setting 13 2/4--stroke
7 Gas post--flow 14 Remote control switch
The welding cable and return cable should be connected to 12 and 15 with MMA--welding.
S Using the remote control socket on the machine the current can be remotely
regulated in TIG and MMA modes.
S Selector switch is used to select remote control operation.
S PHA5 remote control unit allows use of pulsed current in T IG m ode.
When the main power switch is switched on the white indicating lamp, on the front,
comes on.
To take your mind off the risk of overloading the m achine it has been equipped with
an integrated thermostat that trips if the temperature becomes too high.
When this occurs the welding current is cut out and the yellow indicating lamp comes
on. When the temperature has dropped the thermostat automatically resets.
Mode = HF
When the torch trigger is pressed the gas starts flowing. The high frequency unit is
switched on and produces a spark between the electrode and the work piece, which
ionises the gas and ignites the arc. Once the arc is stable the HF unit is
automatically switched off.
GB
-- 1 7 --
bt18d12e
Mode = MMA.
In this mode the machine is set up for welding with coated electrodes. The HF unit
and Lift--Arc are disabled and the Hot--start unit is now activated to give a higher
current during striking.
Mode 2/4--stroke
2 stroke: arc is struck when the torch trigger is depressed and extinguished when
the trigger is released.
4 stroke: there is no need to keep the torch trigger depressed during the welding
sequence. Press and release the trigger to strike the arc. Press and release the
trigger again to extinguish the arc.
6.1 LIFTARC
Mode = Lift--Arc.
The torch electrode is positioned at the point where you want to start welding, when
you press the trigger and raise the torch the arc is struck.
Using the built--in slope--up function the current rises to the preset value. When you
want to stop welding you release the switch and the current slowly decreases in
accordance with the preset slope--down time.
Place the electrode against Press in the torch trigger..
the workpiece.
Tilt the torch a little, lift and To stop--reease the
an arc is produced. torch trigger.
GB
Dismantling the filter
bt07d109
-- 1 8 --
bt18d12e
7 MAINTENANCE
Regular maintenance is important for safe, reliable operation.
Note!
All guarantee undertakings from the supplier cease to a pply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
Only those persons who have appropriate electrical knowledge (authorized
personnel) may remove the safety plates to connect or carry out service,
maintenance or repair work on welding equipment.
Generally, LTR 255 do not require
any maintenance. Normally, it is
sufficient to blow out the m achine
using clean, compressed air
annually, and the dust filter should
be cleaned regularly.
If the machine is set up in dusty or
dirty environments the machine and
dust filter should be cleaned more
often. .
8 ORDERING OF SPARE PARTS
Repair and electrical work should be performed by an authorized ESAB serviceman.
Use only ESAB original spare and wear parts.
LTR 255 is designed and tested in accordance with the international and European
standards IEC/EN 60974--1 and EN 50199. It is the obligation of the service unit which
has carried out the service or repair work to make sure that the product still conforms
to the said standard.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
GB
Edition 041 101
Diagram Ñõåìà
-- 1 9 --
bt18e11a
LTR 255
Edition 041 101
Ordering number Íîìåð çàêàçà
-- 2 0 --
bt18o11a
Ordering no. Denomination Type Notes
0456 840 884 Welding power source LTR 255 with central connection for TIG welding
0456 840 885 Welding power source LTR 255 with OKC connection for TIG welding
0457 326 990 Spare parts list LTR 255
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

ESAB LTR 255 Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente

in altre lingue