Philips BG9041/00 Manuale utente

Lumea

BG9041

1

2

7

36

4

14

15

16

1

8

12

11

9

10

17

18

5

13

Skin tone table / Hauttontabelle /

Cuadro de tono de piel /

Tableau de teint de peau /

Tabella del tono della pelle / Huidtinttabel /

Tabela de tons de pele

2

3

Hair color / Haarfarbentabelle /

Cuadro de color del pelo /

Tableau de couleur de cheveux /

Tabella colori di peli / Haarkleurtabel /

Tabela de tons de pelo

BG9041_3000.034.7481.1_SkintoneTable_A5_fc.pdf 1 21-01-19 13:47

English 6

Deutsch 30

Español 57

Français 82

Italiano 108

Nederlands 134

Português 160

English

Contents

Welcome_______________________________________________________________________________________________ 7

Device overview________________________________________________________________________________________ 7

Contraindications______________________________________________________________________________________ 8

General conditions_____________________________________________________________________________________ 8

Medications/History___________________________________________________________________________________ 8

Pathologies/Disorders_________________________________________________________________________________ 9

Skin condition__________________________________________________________________________________________ 10

Location/areas general________________________________________________________________________________ 10

Location/areas men___________________________________________________________________________________ 10

Location/areas women________________________________________________________________________________ 11

Important_______________________________________________________________________________________________ 11

Danger_________________________________________________________________________________________________ 11

Warning________________________________________________________________________________________________ 11

To prevent damage____________________________________________________________________________________ 13

Caution_________________________________________________________________________________________________ 13

Electromagnetic fields (EMF)__________________________________________________________________________ 14

How IPL works_________________________________________________________________________________________ 15

Suitable body hair colors______________________________________________________________________________ 15

Recommended treatment schedule__________________________________________________________________ 16

Initial phase____________________________________________________________________________________________ 16

Touch-up phase_______________________________________________________________________________________ 16

Treatment time per area_______________________________________________________________________________ 17

What to expect_________________________________________________________________________________________ 17

After initial treatment phase __________________________________________________________________________ 17

During touch-up treatment phase____________________________________________________________________ 18

Using your Lumea for men before and after tanning_________________________________________________ 18

Tanning with natural or artificial sunlight_____________________________________________________________ 18

Tanning with creams___________________________________________________________________________________ 18

Before you use your Lumea for men__________________________________________________________________ 18

Pretreating your skin___________________________________________________________________________________ 18

Skin test________________________________________________________________________________________________ 19

Using your Lumea for men____________________________________________________________________________ 19

Smartskin sensor_______________________________________________________________________________________ 19

Body Attachment______________________________________________________________________________________ 19

Selecting the right light intensity______________________________________________________________________ 20

Handling the device___________________________________________________________________________________ 21

Two treatment modes: Stamp & Flash and Slide & Flash_____________________________________________ 22

After use________________________________________________________________________________________________ 23

Common skin reactions________________________________________________________________________________ 23

Rare side effects_______________________________________________________________________________________ 23

Aftercare_______________________________________________________________________________________________ 24

Charging________________________________________________________________________________________________ 24

Cleaning & storage_____________________________________________________________________________________ 25

Warranty and support_________________________________________________________________________________ 25

Recycling_______________________________________________________________________________________________ 26

Technical specifications_______________________________________________________________________________ 26

6

English

Troubleshooting_______________________________________________________________________________________ 27

Welcome

Welcome to the beauty world of Lumea! You are only a few weeks away

from silky-smooth skin.

Philips Lumea uses Intense Pulsed Light (IPL) technology, known as one of

the most effective methods to continuously prevent hair regrowth. In close

collaboration with skin experts we adapted this light-based technology,

originally used in professional beauty salons, for easy and effective use in

the comfort of your home. Philips Lumea is gentle and offers convenient

and effective treatment at a light intensity that you find comfortable.

Unwanted hairs are finally a thing of the past, look and feel amazing every

day.

To fully benefit from the support that Philips offers, register your product at

www.philips.com/welcome. For further information, please go to

www.philips.com/lumea to find our experts' advice, tutorial videos and

FAQs and make the most of your Lumea.

Note: Keep these instructions with your product at all times.

Device overview

1 Light exit window with integrated UV filter

2 Body attachment

3 Skin tone sensor

4 Integrated safety system

5 Reflector inside the attachment

6 Electronic contacts

7 Opening for electronic contacts

8 Flash button

9 On/off button

10 Confirmation button

11 Toggle buttons

12 Intensity light indicators

13 Setting indication button

14 Ready to flash indicator

15 Air ventilation slots

16 Device socket

17 Adapter

18 Small plug

Not shown: Cleaning cloth

7

English

Contraindications

General conditions

-

Never use the device if you have brownish black or darker skin

tone (you rarely to never sunburn, very dark tanning). In this case

you run a high risk of developing skin reactions, such as

hyperpigmentation and hypopigmentation, strong redness or

burns.

Note: To check if your skin type allows usage of the device, consult

the skin tone table with number 2 on the foldout page.

-

Never use the device if you are pregnant or breastfeeding as the

device was not tested on pregnant or breastfeeding women.

-

Never use the device if you have any active implants such as a

pacemaker, neurostimulator, insulin pump etc.

Medications/History

Never use the device if you take any of the medications listed below:

-

If your skin is currently being treated with or has recently been

treated in the past week with Alpha-Hydroxy Acids (AHAs), Beta-

Hydroxy Acids (BHAs), topical isotretinoin and azelaic acid.

-

If you have taken any form of isotretinoin Accutane or Roaccutane

in the last six months. This treatment can make skin more

susceptible to tears, wounds and irritations.

-

If you are taking photosensitizing agents or medications, check the

package insert of your medicine and never use the device if it is

stated that it can cause photo-allergic reactions, photo-toxic

reactions or if you have to avoid sun when taking this medicine.

8

English

-

If you take anticoagulation medications, including heavy use of

aspirin, in a manner which does not allow for a minimum 1-week

washout period prior to each treatment.

Never use the device:

-

If you have received radiation therapy or chemotherapy within the

past 3 months.

-

If you are on painkillers which reduce the skin's sensitivity to heat.

-

If you take immunosuppressive medications.

-

If you have had surgery in the areas to be treated in the last 3

weeks.

Pathologies/Disorders

Never use the device:

-

If you have diabetes or other systemic or metabolic diseases.

-

If you have congestive heart disease.

-

If you have a disease related to photosensitivity, such as

polymorphic light eruption (PMLE), solar urticaria, porphyria etc.

-

If you have a history of collagen disorder, including a history of

keloid scar formation or a history of poor wound healing.

-

If you have epilepsy with flashlight sensitivity.

-

If your skin is sensitive to light and easily develops a rash or an

allergic reaction.

-

If you have a skin disease such as active skin cancer, you have a

history of skin cancer or any other localized cancer in the areas to

be treated.

-

If you have a history of vascular disorder, such as the presence of

varicose veins or vascular ectasia in the areas to be treated.

-

If you have any bleeding disorder.

-

If you have a history of immunosuppressive disease (including HIV

infection or AIDS).

9

English

Skin condition

Never use the device:

-

If you have infections, eczema, burns, inflammation of hair follicles,

open lacerations, abrasions, herpes simplex (cold sores), wounds

or lesions and haematomas in the areas to be treated.

-

On irritated (red or cut), sunburned, recently tanned or fake-

tanned skin.

-

On the following areas without consulting your doctor first: moles,

freckles, large veins, darker pigmented areas, scars and skin

anomalies. This can result in a burn and a change in skin color,

which makes it potentially harder to identify skin-related diseases.

-

On following areas: warts, tattoos or permanent make-up.

Location/areas general

Never use the device on the following areas:

-

Around the eyes and on or near the eyebrows.

-

On areas where you use long-lasting deodorants. This can result in

skin reactions.

-

Over or near anything artificial like silicone implants, subcutaneous

injection ports (for instance an insulin dispenser) or piercings.

-

On lips, nipples, the inside of the nostrils, ears and anus.

Location/areas men

Never use the device on the following areas:

-

Do not use the device on the face and neck including all beard-

growing areas.

-

Do not use the device on the genital area or scrotum. Men can use

the device in the pubic area.

10

English

Location/areas women

Never use the device on the following areas:

-

areolas, labia minora, vagina.

Note: This list is not exhaustive. If you are not sure whether you can

use the device, we advise you to consult your doctor.

Important

Danger

-

Keep the device and the adapter dry.

-

If the device is broken, do not touch any inner

part to avoid electric shock.

-

Water and electricity are a dangerous

combination. Do not use this appliance in wet

surroundings (e.g. near a filled bath, a running

shower or a filled swimming pool).

Warning

-

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety

-

Children should be supervised to ensure that they do not play with

the device.

-

The device is not intended for children under the age of 18 years.

Teenagers aged below 18 years can use the device with the

consent and/or assistance of their parents or the persons who

have parental authority over them. Adults of 18 years and older can

use the device freely.

11

English

-

Always check the device before you use it. Do not use the device

or adapter if it is damaged.

-

The external flexible cable or cord of this transformer cannot be

replaced; if the cord is damaged, the transformer shall be

scrapped.

-

Do not use the device if the UV filter of the light exit window

and/or attachment is broken.

-

Do not use any pencil or pen to mark the areas to be treated. This

may cause burns on your skin.

-

If you have a dark-colored skin, be careful with treating a darker

area immediately after a lighter area. The skin tone sensor may not

immediately block the treatment on the darker body area.

-

Hair removal by intense pulsed light sources can cause increased

hair growth in some individuals. Based upon currently available

data, the highest risk groups for this response are females of

Mediterranean, Middle Eastern and South Asian heritage treated

on the face and neck.

-

Adapter, light exit window and the filter of the attachment(s) can

become very hot after usage. Do not touch the adapter, inner part

of the light exit window and the filter or the inner part of the

attachment(s) without having these cool down.

-

This device has a detachable power adapter. Only use the adapter

provided with this device. The reference number

(AD2069x20020HF) can be found on your device. The 'x' in this

number refers to the plug type for your country.

-

For hygienic reasons, the device should only be used by one

person.

Note: If you notice a skin tone change from last treatment (e.g. due

to tanning), we recommend you to perform a skin test and to wait 30

minutes before your next treatment.

12

English

To prevent damage

-

Make sure that nothing obstructs the airflow through the

ventilation slots of the device.

-

Never subject the device to heavy shocks and do not shake or

drop it.

-

If you take the device from a very cold environment to a very warm

environment or vice versa, wait approximately 3 hours before you

use it.

-

Store the device in a dust free and dry place.

-

Do not expose the device to temperatures lower than 5°C or

higher than 35°C during use.

-

To prevent damage, do not expose the device to direct sunlight or

UV light for prolonged periods of time (exceeding several hours).

Caution

-

This device is only intended for removing unwanted body hair from

areas below the cheekbones. Do not use it for any other

purpose.Doing so may expose you to a hazardous situation.Do

not use the device on the face and neck including all beard-

growing areas. Men can use the device in the pubic area (excluding

the genital area and scrotum).

-

This device is not washable. Never immerse the device in water

and do not rinse it under the tap.

-

For hygienic reasons, the device should only be used by one

person.

-

Use the device only at settings suitable for your skin type. Use at

higher settings than those recommended can increase the risk of

skin reactions and side effects.

13

English

-

Never use compressed air, scouring pads, abrasive cleaning agents

or aggressive liquids such as petrol or acetone to clean the device.

-

The scattered light produced by the device is harmless to your

eyes. Do not look at the flash while using the device. It is not

necessary to wear goggles during use. Use the device in a well-lit

room so that the light is less glaring to your eyes.

-

Always return the device to a service center authorized by Philips

for examination or repair. Repair by unqualified people could

cause an extremelyhazardous situation for the user.

-

Never leave the device unattended when it is switched on. Always

switch off the device after use.

-

Do not use the device if any of the conditions mentioned in

chapter ‘Who should not use Lumea? Contraindication' apply to

you.

-

Tanning with natural or artificial sunlight might influence the

sensitivity and color of your skin. Perform a skin test to determine

the appropriate light intensity setting.

-

Before you use Lumea, you should clean your skin and make sure

it is hair-free, entirely dry and free from oily substances.

-

Do not treat the same skin area more than once during a session.

This does not improve the effectiveness of the treatment, but

increases the risk of skin reactions.

-

Lumea should never be painful. If you experience discomfort,

reduce the light intensity setting.

Electromagnetic fields (EMF)

This Philips device complies with all applicable standards and regulations

regarding exposure to electromagnetic fields.

14

English

How IPL works

1

With Intense Pulsed Light technology, gentle pulses of light are applied to

the skin and absorbed by the hairroot. The lighter the skin and the darker

the hair, the better the pulses of light are absorbed.

2

The pulses of light stimulate the hair follicle to go into a resting phase. As a

consequence, the hair sheds naturally and hair regrowth is prevented.

3

The cycle of hair growth consists of different phases. IPL technology is only

effective when the hair is in its growing phase. Not all hairs are in the

growing phase at the same time. This is why we recommend you to follow

the initial treatment phase (4-5 treatments, every treatment 2 weeks apart)

and then the follow-up treatment phase (touch-ups every 4-8 weeks) to

make sure all hairs are effectively treated in the growing phase.

Tip: To assure long lasting hair removal, touch-ups every 4 weeks are

recommended.

Note: Treatment with Lumea is not effective if you have light blond, grey, red

or white hairs as light hairs do not absorb enough light. Below you can see

the hair colors for which Lumea is suitable and effective.

Suitable body hair colors

Note: To check if your body hair color allows usage of the device, consult the

hair color table with number 3 on the foldout page.

15

English

Recommended treatment schedule

Initial phase

21 3 4 5 6 7 8

For the first 4 to 5 treatments, we advise you to use Lumea for men once

every two weeks to ensure that all hairs are treated.

Note: Replacing one of the IPL treatments with another hair removal

method (waxing, epilating, etc.) will not help to reach the desired hair

reduction.

Note: If you want to remove hairs in between the Lumea treatments, you

can use your normal hair removal method.

Touch-up phase

20

2012

After the initial treatment phase (4-5 treatments), we recommend touch-ups

every 4-8 weeks, when you see hairs growing back. This to maintain results

and enjoy smooth skin for months. The time between treatments may vary

based on your individual hair regrowth and also across different body areas.

Tip: You can write the treatment schedule in your agenda to remind yourself

of the treatments so you will not forget.

Note: Using the device more often does not enhance the effectiveness.

16

English

Treatment time per area

7-12 min.

±20 min.

2 min.

2-5 min.

7-12 min.

What to expect

After initial treatment phase

-

Afterthe first treatment, it can take 1 to 2 weeks for the hairs to fall out. In

the first weeks following the initial treatments, you still see some hairs

growing.These are likely to be hairs that were not in their growing phase

during the first treatments.

-

After 2-3 treatments, you should see a noticeable reduction in hair

growth. However, to effectively treat all hairs, it is important to keep on

treating according to the recommended treatment schedule.

17

English

-

After 4-5 treatments, you should see a significant reduction of hair

growth in the areas that you treated with Lumea. A reduction of hair

density should be visible as well.

During touch-up treatment phase

-

Keep on treating with frequent touch-ups (every 4-8 weeks) to maintain

the result.

Using your Lumea for men before and after

tanning

Tanning with natural or artificial sunlight

Intentionally exposing your skin to natural or artificial sunlight with the aim

of developing a tan influences the sensitivity and color of your skin.

Therefore the following is important:

-

After each treatment, wait at least 48 hours before tanning. Even after 48

hours, make sure that the treated skin does not show any redness from

the treatment anymore.

-

In case of exposing your skin to the sun (without tanning intentionally) in

the 48 hours after treatment, use a sunblock SPF 50+ on the treated

areas. After this period, you can use a sunblock SPF 30+ for two weeks.

-

After tanning, wait at least 2 weeks before you use Lumea.

-

After recent tanning, perform a skin test to determine the appropriate

light intensity setting. For instructions see chapter 'Skin test'.

-

Do not use Lumea on sunburned body areas.

-

The back and chest are often tanned. Take special care to select the

appropriate intensity for treating the tanned skin to prevent skin

reactions

Note: Occasional and indirect sun exposure does not qualify as tanning.

Tanning with creams

If you have used an artificial tanning lotion, wait until the artificial tan has

disappeared completely before you use the device.

Before you use your Lumea for men

Pretreating your skin

Before you use Lumea, you should pretreat your skinby removing hairs on

the surface of your skin. This allows the light to beabsorbed by the hair

parts below the skin surface to ensure effective treatment. You can either

shave, epilate or wax. Do not use depilatory creams, as chemicals may cause

skin reactions.

18

English

If you choose to wax, please wait 24 hours before using Lumea to let your

skin rest. We recommend that you take a shower before the treatment to

ensure that all possible residue of wax has been removed from your skin.

1 Pretreat the areas you intend to treat with Lumea.

2 Clean your skin and make sure it is hair-free, entirely dry and free from

oily substances.

Note: if shaving causes skin irritation, we advise you not to use the device

until skin irritation is resolved.

Skin test

When you use Lumea for the first time or after tanning, perform a skin test

on each area to be treated. The skin test is necessary to check your skin's

reaction to the treatment and to determine the correct light intensity setting

for each bodyarea.

Note: do not try the device on difficult or sensitive areas (ankle and bony

area).

1 Turn on the device. Make sure you select setting 1.

2 Place the device at a 90° angle on the skin so that the integrated safety

system is in contact with your skin.

The integrated safety system prevents unintentional flashing without skin

contact.

3 Press the flash button to release a flash.

4 Slide the device over the skin to the next area to be treated.

5 Increase the setting by one level, apply a flash and slide the device to the

next area. Repeat this for all levels, as long as each level still feels

comfortable. See the table in: 'Selecting the right light intensity'.

6 After the skin test, wait 24 hours and check your skin for any reaction. If

your skin shows reactions, choose the highest setting that did not result

in any skin reaction for subsequent use.

Using your Lumea for men

Smartskin sensor

Each attachment of the Lumea for men has integrated skin tone sensor

which measures the skin tone at the beginning of each session and

occasionally during the session. If it detects a skin tone that is too dark for

treatment with Lumea,the 'ready to flash' light starts blinking orange and

the device automatically disables to prevent you from developing skin

reactions. This means that it does not flash when you press the flash button.

Body Attachment

The body attachment has a curved-in design to cover effectively and treat

areas below the neckline. Especially large areas such as chest, back, legs,

arms and stomach.

19

English

Selecting the right light intensity

Lumea provides 5 different light intensities. You will always be able to

change to a light intensity setting you find comfortable.

1 Press the on/off button to turn on the device. The device starts to

operate at light intensity setting 1.

Note: To adjust the light intensity setting manually without using the

setting indication feature, use the toggle buttons until you have reached

the required setting. The corresponding intensity light level lights up

white.

2 Press the setting indication button ( ) and put the device to your skin.

3 After the device scanned your skin, the light intensity indicators blink

white. This shows which intensities are most comfortable based on your

skin tone.

4 Press the confirmation button ( ) to confirm that you want to use the

indicated setting to start using the device.

Philips Lumea will automatically use the highest suggested intensity,

indicated by a continuous lighting led indicator.

Lumea gives you the freedom to select the light intensity that you find

most comfortable. If you want to set the light intensity setting manually,

please consult the table below. This table shows settings that for the

majority of users provides a comfortable, but still effective setting.

5 Using Lumea should never be painful. If you experience discomfort,

reduce the light intensity setting. You can do this by using the toggle

buttons.

Note: The device automatically disables when your skin tone is too dark.

The ‘ready to flash’ light will blink orange to indicate if the skin tone is too

dark for IPL treatment with Lumea.

6 After moving to another body area or after recent tanning, perform a skin

test to determine the right light intensity setting. To re-activate the

setting indication feature, press the setting indication button.

Note: Since body areas might differ in skin color, you need to select the

right setting for each body area separately.

Skin tone

Light intensity setting

White: you always sunburn, never tan. 4/5

Beige: you easily sunburn, tan minimally. 4/5

Light brown: you sunburn easily, tan slowlyto light brown. 4/5

Mid brown: you rarely sunburn, tan easily. 3/4

Dark brown: you rarely sunburn, tan very easily. 1/2/3

Brownish black or darker: you rarelyornever sunburn, very dark

tanning.

You cannot use the device

20

English

Note: To check if your skin type allows usage of the device, consult the skin

tone table with number 2 on the foldout page.

Note:Your skin may react differently on different days/occasions for a

number of reasons.

Handling the device

1 Before use, clean the attachment and the light exit window.

2 Put the small plug in the device and put the adapter in the wall socket.

Note: If the device is not fully charged when you start a treatment, the

battery will run out during a full body treatment. We advise you to always

fully charge the device before you start a treatment or to use it corded.

If you use the device to treat your shoulders, chest, back and legs you

may have to recharge the device during the treatment. This is normal.

Tip: If you want to treat your back and your shoulders, you require the

help of your partner or a friend to guarantee complete coverage and best

results.

3 Switch on the device and select the right light intensity for your skin tone.

For selecting the right skin tone, you can make use of the setting

indication feature (see 'Selecting the right light intensity').

4 Place the device at a 90° angle on the skin so that the integrated safety

system is in contact with your skin.

The integrated safety system prevents unintentional flashingwithout skin

contact.

5 Press the device firmly onto your skin to ensure proper skin contact. The

‘ready to flash light’ on the back of the device lights up white to indicate

that you can proceed with the treatment.

Note: When the ‘ready to flash’ light starts blinking orange, your skin is

not suitable for treatment. In this case, the device automatically disables.

You can try to use the device on other areas with a lighter skin tone.

Note: If the 'ready to flash' light does not light up white, the device is not

completely in contact with your skin.

21

English

La pagina si sta caricando...

Philips BG9041/00 Manuale utente

Questo manuale è adatto anche per

Philips BG9041/00 Manuale utente

in altre lingue

Documenti correlati

Altri documenti