Haier HAMTP64MC Manuale utente

Instruction Manual For Induction Hob

ENGLISH

Manual de Instrucciones para placa de inducción

ESPAÑ OL

Manuel d'instruction pour plaque à induction

FRANÇAIS

Manuale di istruzioni per il piano cottura a induzione

ITALIANO

HAMTP64MC

Thank you for purchasing the HAIER induction hob. Please read this instruction manual

carefully before using the hob and keep it in a safe place for future reference.

Power Board: TP3-HD4-02

Main Control Board: TM-HD4-01ST / TM-HD2-01ST

Display Board: D-IF7242C

WIFI Module: ESP32-SOLO-1

Frequency bands: 2.412-2.472GHz

Maximum output power: +20dBm

Importer:

Candy Hoover Group s.r.l.

Via Eden Fumagalli 20861 Brugherio(MB), Branza, Italy

Manufacturer:

Candy Hoover Group s.r.l.

Via Eden Fumagalli 20861 Brugherio(MB), Branza, Italy

Content 
 Foreword ........................................................................................ 4 
1  Safety Warnings .......................................................................... 4 
2  Installation ................................................................................. 4 
2.1  Electrical Shock Hazard ................................................... 4 
2.2  Cut Hazard ................................................................... 4 
2.3  Important safety instructions ........................................... 4 
3  Operation and maintenance .......................................................... 5 
3.1  Electrical Shock Hazard ................................................... 5 
3.2  Health Hazard ............................................................... 6 
3.3  Hot Surface Hazard ........................................................ 6 
3.4  Cut Hazard ................................................................... 6 
3.5  Important safety instructions ........................................... 6 
 Product Introduction ....................................................................... 8 
1  Top View .................................................................................... 8 
2  Control Panel .............................................................................. 8 
3  Working Theory ........................................................................... 9 
4  Before using your New Induction Hob ............................................. 9 
5  Technical Specification .................................................................. 9 
 Operation of Product ....................................................................... 9 
1  Touch Controls ............................................................................ 9 
2  Choosing the right Cookware ....................................................... 10 
3  How to use ............................................................................... 11 
3.1  Start cooking .............................................................. 11 
3.2  Finish cooking ............................................................. 12 
3.3  Using the Boost function ............................................... 12 
3.4  FLEXIBLE AREA ........................................................... 13 
3.5  FRENCH PLAQUE .......................................................... 13 
3.6  Locking the Controls ..................................................... 14 
3.7  Pause Mode ................................................................. 14 
3.8  Power Management Function ......................................... 14 
3.9  Timer control............................................................... 15 
3.10  Default working times ................................................. 17 
3.11 Cook with me function .................................................. 18 
3.12  Special functions. ....................................................... 19 
3.13  Preci probe & Ladle .................................................... 20 
 Cooking Guidelines ........................................................................ 22 
1  Cooking Tips ............................................................................. 22 
1.1  Simmering, cooking rice ............................................... 22 
1.2  Searing steak .............................................................. 22 
1.3  For stir-frying .............................................................. 22 
2  Detection of Small Articles .......................................................... 23 
 Heat Settings ................................................................................ 23 
 Care and Cleaning ......................................................................... 24 

 Hints and Tips ............................................................................... 25 
 Failure Display and Inspection ...................................................... 26 
 Installation ................................................................................... 28 
1  Selection of installation equipment ............................................... 28 
2  Before installing the hob, make sure that ...................................... 29 
3  After installing the hob, make sure that ........................................ 30 
4  Before locating the fixing brackets ............................................... 30 
5  Adjusting the bracket position ..................................................... 30 
6  Cautions ................................................................................... 31 
7  Connecting the hob to the mains power supply .............................. 31

4

Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance

with Directive 2014/53/EU. The full text of the EU declaration of conformity is available

at the following internet address: www.candy-group.com

1.

Foreword

1.1 Safety Warnings

Your safety is important to us. Please read this information

before using your cooktop.

1.2 Installation

1.2.1 Electrical Shock Hazard

 Disconnect the appliance from the mains electricity supply

before carrying out any work or maintenance on it.

 Connection to a good earth wiring system is essential and

mandatory.

 Alterations to the domestic wiring system must only be

made by a qualified electrician.

 Failure to follow this advice may result in electrical shock

or death.

1.2.2 Cut Hazard

 Take care - panel edges are sharp.

 Failure to use caution could result in injury or cuts.

1.2.3 Important safety instructions

 Read these instructions carefully before installing or using

this appliance.

 No combustible material or products should be placed on

this appliance at any time.

 Please make this information available to the person

responsible for installing the appliance as it could reduce

your installation costs.

 In order to avoid a hazard, this appliance must be installed

according to these instructions for installation.

 This appliance is to be properly installed and earthed only

by a suitably qualified person.

 This appliance should be connected to a circuit which

incorporates an isolating switch providing full

disconnection from the power supply.

ENGLISH

5

 Failure to install the appliance correctly could invalidate

any warranty or liability claims.

 This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved.

 Children shall not play with the appliance. Cleaning and

user maintenance shall not be made by children without

supervision.



 If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

 Warning: If the surface is cracked, switch off the appliance

to avoid the possibility of electric shock, for hob surfaces

of glass-ceramic or similar material which protect live parts

 Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot

 A steam cleaner is not to be used.

 Do not use a steam cleaner to clean your cooktop.

 The appliance is not intended to be operated by means of

an external timer or separate remote-control system.

 WARNING: Danger of fire: do not store items on the

cooking surfaces.

 The cooking process has to be supervised. A short term

cooking process has to be supervised continuously.

 WARNING: Unattended cooking on a hob with fat or oil can

be dangerous and may result in fire. NEVER try to

extinguish a fire with water, but switch off the appliance

and then cover flame e.g. with a lid or a fire blanket.

1.3 Operation and maintenance

1.3.1 Electrical Shock Hazard

 Do not cook on a broken or cracked cooktop. If the

cooktop surface should break or crack, switch the

appliance off immediately at the mains power supply (wall

6

switch) and contact a qualified technician.

 Switch the cooktop off at the wall before cleaning or

maintenance.

 Failure to follow this advice may result in electrical shock

or death.

1.3.2 Health Hazard

 This appliance complies with electromagnetic safety

standards.

 However, persons with cardiac pacemakers or other

electrical implants (such as insulin pumps) must consult

with their doctor or implant manufacturer before using this

appliance to make sure that their implants will not be

affected by the electromagnetic field.

 Failure to follow this advice may result in death.

1.3.3 Hot Surface Hazard

 During use, accessible parts of this appliance will become

hot enough to cause burns.

 Do not let your body, clothing or any item other than

suitable cookware contact the Induction glass until the

surface is cool.

 Keep children away.

 Handles of saucepans may be hot to touch. Check

saucepan handles do not overhang other cooking zones

that are on. Keep handles out of reach of children.

 Failure to follow this advice could result in burns and

scalds.

1.3.4 Cut Hazard

 The razor-sharp blade of a cooktop scraper is exposed

when the safety cover is retracted. Use with extreme care

and always store safely and out of reach of children.

 Failure to use caution could result in injury or cuts.

1.3.5 Important safety instructions

 Never leave the appliance unattended when in use.

Boilover causes smoking and greasy spillovers that may

ignite.

 Never use your appliance as a work or storage surface.

 Never leave any objects or utensils on the appliance.

ENGLISH

7

 Do not place or leave any magnetisable objects (e.g. credit

cards, memory cards) or electronic devices (e.g.

computers, MP3 players) near the appliance, as they may

be affected by its electromagnetic field.

 Never use your appliance for warming or heating the

room.

 After use, always turn off the cooking zones and the

cooktop as described in this manual (i.e. by using the

touch controls). Do not rely on the pan detection feature to

turn off the cooking zones when you remove the pans.

 Do not allow children to play with the appliance or sit,

stand, or climb on it.

 Do not store items of interest to children in cabinets above

the appliance. Children climbing on the cooktop could be

seriously injured.

 Do not leave children alone or unattended in the area

where the appliance is in use.

 Children or persons with a disability which limits their

ability to use the appliance should have a responsible and

competent person to instruct them in its use. The

instructor should be satisfied that they can use the

appliance without danger to themselves or their

surroundings.

 Do not repair or replace any part of the appliance unless

specifically recommended in the manual. All other

servicing should be done by a qualified technician.

 Do not place or drop heavy objects on your cooktop.

 Do not stand on your cooktop.

 Do not use pans with jagged edges or drag pans across

the Induction glass surface as this can scratch the glass.

 Do not use scourers or any other harsh abrasive cleaning

agents to clean your cooktop, as these can scratch the

Induction glass.

 This appliance is intended to be used in household and

similar applications such as: -staff kitchen areas in shops,

offices and other working environments; -farm houses; -by

clients in hotels, motels and other residential type

environments; -bed and breakfast type environments.

 WARNING: The appliance and its accessible parts become

8

3

4

5

6

7

8

2

1. Heating zone power controls

2. ON/OFF control

3. Keylock control

4. Timer control

5. Pause control

6. Flexible Area control

7. Special function control (melting,

boiling, keep warm)

8. Cook with me function control

hot during use.

 Care should be taken to avoid touching heating elements.

 Children less than 8 years of age shall be kept away unless

continuously supervised.

Congratulations on the purchase of your new Induction Hob.

We recommend that you spend some time to read this Instruction / Installation Manual in order to fully

understand how to install correctly and operate it.

For installation, please read the installation section.

Read all the safety instructions carefully before use and keep this Instruction / Installation Manual for

future reference.

2.1 Top View

6

2

3

5

4

1

7

2.2 Control Panel

1

1. Max. 2000/3200 W zone

2. Max. 2000/3200 W zone

3. Max. 2200/3200 W zone

4. Max. 1400/2000 W zone

5. Max. 3000/3600 W zone

6. Glass plate

7. Control panel

2. Product Introduction

ENGLISH

9

2.3 Working Theory

Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by

electromagnetic fields generating heat directly in the pan, rather than indirectly through heating the

glass surface. The glass becomes hot only because the pan eventually warms it up.

2.4 Before using your New Induction Hob

 Read this guide, taking special note of the ‘Safety Warnings’ section.

 Remove any protective film that may still be on your Induction hob.

2.5 Technical Specification

Cooking Hob

HAMTP64MC

Cooking Zones

4 Zones

Supply Voltage

220-240V~ 50Hz or 60Hz

Installed Electric Power

7200W

Product Size (mm)

590X520X58

Building-in Dimensions (mm)

560X480

Weight and Dimensions are approximate. Because we continually strive to improve our products we

may change specifications and designs without prior notice.

The above may vary according to the size of the pan and the material it is made from.

3.

Operation of Product

3.1 Touch Controls

 The controls respond to touch, so you don’t need to apply any pressure.

 Use the ball of your finger, not its tip.

The base diameter of induction cookware

Cooking zone

Minimum

Maximum

1 & 2

80

200

3

100

210

4

80

140

Flexing zone

80

200*400

iron pot

magnetic circuit

ceramic glass plate

induction coil

induced currents

10

 You will hear a beep each time a touch is registered.

 Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)

covering them. Even a thin film of water may make the controls difficult to operate.

3.2 Choosing the right Cookware

• Only use cookware with a base suitable for induction cooking.

Look for the induction symbol on the packaging or on the bottom

of the pan.

• You can check whether your cookware is suitable by carrying out a magnet test.

Move a magnet towards the base of the pan. If it is attracted, the pan is suitable

for induction.

• If you do not have a magnet:

1. Put some water in the pan you want to check.

2. If does not flash in the display and the water is heating, the pan is suitable.

• Cookware made from the following materials is not suitable: pure stainless steel, aluminium or copper

without a magnetic base, glass, wood, porcelain, ceramic, and earthenware.

Do not use cookware with jagged edges or a curved base.

Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the

cooking zone. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a

slightly wider energy will be used at its maximum efficiency. If you use smaller pot efficiency could be

less than expected. Pot less than 140 mm could be undetected by the hob. Always centre your pan on

the cooking zone.

Always lift pans off the Induction hob – do not slide, or they may scratch the glass.

ENGLISH

11

3.3 How to use

3.3.1 Start cooking

Touch the ON/OFF control for three seconds. After power

on, the buzzer beeps once, all displays show “–” or “– –”,

indicating that the induction hob has entered the state of

standby mode.

Place a suitable pan on the cooking zone that you wish to

use.

• Make sure the bottom of the pan and the surface of the

cooking zone are clean and dry.

Touching the heating zone slider control , and a indicator

next to the key will flash.

Select a heat setting by touching the slider control

• If you don’t choose a heat setting within 1 minute, the

Induction hob will automatically switch off. You will need to

start again at step 1.

• You can modify the heat setting at any time during

cooking.

If the display flashes alternately with the heat setting

This means that:

• you have not placed a pan on the correct cooking zone or,

• the pan you’re using is not suitable for induction cooking or,

• the pan is too small or not properly centered on the cooking zone.

No heating takes place unless there is a suitable pan on the cooking zone.

The display will automatically turn off after 2 minutes if no suitable pan is placed on it.

12

3.3.2 Finish cooking

Touching the heating zone selection control that you

wish to switch off.

Turn the cooking zone off by touching the slider to “ ”.

Make sure the display shows “0”.

Turn the whole cooktop off by touching the ON/OFF

control.

Beware of hot surfaces

H will show which cooking zone is hot to touch. It

will disappear when the surface has cooled down to

a safe temperature. It can also be used as an energy

saving function if you want to heat further pans, use

the hotplate that is still hot.

3.3.3 Using the Boost function

Activate the boost function

Touching the heating zone slider control

Touching the slider to the right end . Make sure the

display shows “P”.

Cancel the Boost function

Touching the heating zone slider control that you wish

to cancel the boost function.

Turn the cooking zone off by touching the slider to “ ”.

Make sure the display shows “0”.

ENGLISH

13

 The function can work in any cooking zone.

 The cooking zone returns to its original setting after 5 minutes.

 If the original heat setting equals 0, it will return to 9 after 5 minutes.

3.4.4 Flexible Area

• This area can be used as a single zone or as four independent zones, accordingly to the cooking needs

anytime.

• Flexible area is made of 4 independent inductors that can be controlled separately two by two.

When working as a single zone, the part that is not covered by cookware is automatically switched

oﬀ after one minute.

• To grant a correct heat distribution, the cookware should be correctly placed:

-

In any part of the flexible zone when the cookware is between 80 and 200mm.

-

In the big area when the cookware is bigger than 200mm.

As big zone

To activate the flexible area as a single big zone, simply press

the Flexible Area control.

The power setting works as any other normal area.

The power level is unique for all the flexible area and it can be selected just using a slider control

If the pot is moved from the front to the rear part (or vice versa), the flexible area detects

automatically the new position, keeping the same power.

To add a further pot, deactivate the Flexible area pressing the dedicated button, in order to detect the

cookware.

As four independent zones

To use the flexible area as four different zones with two different power settings, do not activate the

Flexible Area control

Examples for good and bad pot placement

3.4.5 French Plaque

• This area can set the power according to the position of the pot.

• If the pot is on the bottom of flexible area, the power is set to Level 1.

• If the pot is on the middle of flexible area, the power is set to Level 10.

• If the pot is on the top of flexible area, the power is set to Level 14.

14

French Plaque

To activate the French Plaque area, simply press the Flexible

Area control for 2 second

Move the position of the pot, the power will change automatically

Cancel French Plaque

Press the Flexible Area control to turn off the cooking zone.

3.3.6 Locking the Controls

 You can lock the controls to prevent unintended use (for example children accidentally turning the

cooking zones on).

 When the controls are locked, all the controls except the ON/OFF control are disabled.

To lock the controls

Touch and hold the Lock control for a while.

The timer indicator will show “ Lo ”

To unlock the controls

Touch and hold the Lock control for a while.

When the hob is in the lock mode, all the controls are disable except the ON/OFF , you can always

turn the induction hob off with the ON/OFF control in an emergency, but you shall unlock the hob first

in the next operation.

3.3.7 Pause Mode

 You can pause the heating instead of shutting the hob off.

 When entering the Pause mode, all the controls except the ON/OFF control are disabled.

To enter pause mode

Short touch the Pause control

All the indicator will show “ 11“

To exit pause mode

Short touch Pause control.

When the hob is in the pause mode, all the controls are disable except the ON/OFF , you can always

turn the induction hob off with the ON/OFF control in an emergency. The hob will shut down after

10min if you don’t exit the pause mode.

3.3.8 Power Management Function

 it is possible to set a maximum power absorption level for the induction hob, choosing up to

different power ranges.

 induction hobs are able to limit themselves automatically in order to work at lower power level, to

avoid the risk of overloading.

ENGLISH

15

To enter Power Management Function

Turn on the hob, then Press at the same time

the Pause control and Lock control.

The timer indicator will show “ P5“ which means

To switch to another level

press +/- of the timer

or

There are 5 power levels, from “P1” to “p5”. The

timer indicator will show one of them.

Confirmation and Exit Power Management Function

Press at the same time Pause control and Lock

control for confirmation.

Then the hob will be turned off.

3.3.9 Timer control

You can use the timer in two different ways:

 You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when

the set time is up.

 You can set it to turn one or more cooking zones off after the set time is up.

The timer of maximum is 99min.

power level 5。The default mode is on 7.2kW。

“P1” : the maximum power is 2.5kW.

“P3” : the maximum power is 4.5kW.

“P5” : the maximum power is 7.2kW.

“P2” : the maximum power is 3.5kW.

“P4” : the maximum power is 5.5kW.

16

a) Using the Timer as a Minute Minder

If you are not selecting any cooking zone

Make sure the cooktop is turned on.

Note: you can use the minute minder even if you’re not

selecting any cooking zone.

Touch “+” the controls of the timer. The minder

indicator will start flashing and “10” will show

in the timer display.

Set the time by touching the “-” or “+” control

of the timer

Hint: Touch the “-” or “+” control of the timer

once to decrease or increase by 1 minute.

Touch and hold the “-” or “+” control of the timer to

decrease or increase by 10 minutes.

When the time is set, it will begin to count down

immediately. The display will show the remaining

time and the timer indicator will flash for 5 seconds.

Buzzer will beep for 30 seconds and the timer

indicator shows “- - “ when the setting time finished.

b) Setting the timer to turn one or more cooking zones off

Set one zone

Touching the heating zone slider control

Set the time by touching the or control of the timer

Hint: Touch the “-“ or “+” control of the timer

once will decrease or increase by 1 minute.

Touch and hold the ”-“ or “+”control of the timer

will decrease or increase by 10 minutes.

When the time is set, it will begin to count down immediately.

The display will show the remaining time and the timer

indicator flash for 5 seconds.

NOTE: The red dot next to power level indicator will

illuminate indicating that zone is selected.

ENGLISH

17

When cooking timer expires, the corresponding cooking zone

will be switched off automatically.

Other cooking zone will keep operating if they are turned on previously.

set more zones:

The steps for setting more zones are similar to the steps of setting one zone;

When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking

zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes.

The shown as below:

(set to 15 minutes)

(set to 45 minutes)

Once the countdown timer expires, the corresponding

zone will switch off. Then it will show the new min.

timer and the dot of corresponding zone will flash.

The shown as right:

(set to 30 minutes)

Touch the heating zone selection control, the corresponding timer will be shown in the timer

indicator.

c) Cancel the timer

Touching the heating zone slider control that you want

to cancel the timer

Touch and hold the timer control “ - ”, the timer

decreases to “00” and the timer is cancelled.

3.3.10 Default working times

Auto shut down is a safety protection function for your induction hob. It shut down automatically if

ever you forget to turn off your cooking. The default working times for various power levels are shown

in the below table:

Power level

1

2

3

4

5

6

7

8

9

Default working timer (hour)

8

6

4

Power level

10

11

12

13

14

Default working timer (hour)

4

2

When the pot is removed, the induction hob can stop heating immediately and the hob automatically

switch off after 2 minutes.

People with a heart pace maker should consult with their doctor before using this unit.

18

3.3.11 Cook with me function

First of all, you should download hOn app and install to your portable device. Then enroll your

induction hob following the instructions directly from the App.

To make the pairing between Hob and APP use the following process:

Press 4 seconds the Cook with me button. Once the 4 seconds have passed, the digit of the TIMER

starts to blink with PA written on it and start the pairing process.

When wi-fi ON: one dot will appear on the right side of the LED.

When WIFI OFF: No dot will appear

How to set " Cook with me" Function

Choose from the hOn App recipes menu or special programs menu.

Follow step by step the indications on the App and when you have

finished send the parameters to the hob that will cook for you.

When the hob receives the command from the app, the hob will beep for

2 times and blink for one second to indicate that the instructions have

been received.

To start the recipe, press the “Cook with me” button.

If you want to get out of "Cook with me" function change the power

level of the zone.

a. WIRELESS PARAMETERS

Technology

Wi-Fi

BLE

Standard

IEEE 802.11b/n/g

Bluetooth v4.2, BR/EDR, BLE

Frequency Band(s) [MHz]

2402-2480

Maximum Power [mW]

1500

b. PRODUCT INFORMATION FOR NETWORKED EQUIPMENT

Product information for networked equipment

Power consumption of the product in networked standby if

all wired network ports are connected and all wireless

network ports are activated:

NA

How to activate wireless network port:

For WIFI activation, press 4 seconds the

“Cook with me” button

How to deactivate wireless network port:

For WIFI de-activation, press 4 seconds the

“Cook with me” button

ENGLISH

19

3.3.12 Special function

Keep warm Melting Boiling

How to set Special function

Touching the heating zone slider control.

Keep warm function is ideal to keep the preparations at a

constant temperature.

Press the Keep warm key, the indicator will be show “|”

Melting function is the ideal solution for melting chocolate,

butter. This function helps you to prepare all kind of desert or

sauces.

Press the Melting key, the indicator will be show “| |”

Boiling function is ideal to boil water or any liquid.

Press the Boiling key, the indicator will be show “| ||”

La pagina si sta caricando...

Haier HAMTP64MC Manuale utente

Haier HAMTP64MC Manuale utente

in altre lingue

Documenti correlati

Altri documenti