Motorola PMLN6393 Series Manuale utente

Single Unit Charger Kit

PMLN6393_

User Guide

en

de-DE

fr-FR

es-ES

it-IT

pt-PT

nl-NL

da

sv

fi

no-NO

tr

pl

ru

uk

1

English

IMPORTANT SAFETY INSTRUCTIONS

This document contains important safety and operating instructions.

Please read these instructions carefully and save them for future

reference.

Before using the battery charger, read all the instructions and cautionary

markings on (1) the charger, (2) the battery, and (3) the radio using the

battery.

1. An extension cord should not be used unless absolutely necessary.

Use of an improper extension cord could result in risk of fire and

electric shock. If an extension cord must be used, make sure that the

cord size is 18 AWG for lengths of up to 6.5 feet (2.0 m), and

16 AWG for lengths up to 9.8 feet (3.0 m).

2. To reduce risk of fire, electric shock, or injury, do not operate the

charger if it has been broken or damaged in any way. To reduce risk

of damage to the electric plug and cord, pull the plug rather than the

To reduce risk of injury, charge only the rechargeable

Motorola authorized batteries listed in Table 1. Other

batteries may explode, causing personal injury and

damage. Use of accessories not recommended by

Motorola may result in risk of fire, electric shock, or

injury.

C a u t i o n

2

English

cord when disconnecting the charger. Take it to a qualified Motorola

service representative.

3. Do not disassemble the charger – it is not repairable and

replacement parts are not available. Disassembly of the charger may

result in risk of electric shock or fire.

4. To reduce risk of electric shock, unplug the charger from the AC

outlet before attempting any maintenance or cleaning.

OPERATIONAL SAFETY GUIDELINES

• Turn off the radio when charging the battery.

• This equipment is not suitable for outdoor use. Use only in dry locations/

conditions.

• Connect equipment only to an appropriately fused and wired supply of the

correct voltage (as specified on the product).

• Disconnect from line voltage by removing the power plug from the outlet.

• The socket outlet that this equipment is connected should be close and

easily accessible.

• In equipments using fuses, replacements must comply with the type and

rating specified in the equipment instructions.

• Maximum ambient temperature around the charger must not exceed

40 °C (104 °F).

• Output power from the power supply unit must not exceed the ratings

stated on the product label located on the bottom of the charger.

• Make sure the cord is located where it will not be stepped on, tripped

over, or subjected to water, damage, or stress.

3

English

MOTOROLA AUTHORIZED COMPONENTS

The following charts contain component chart numbers approved for use with

the Charging Kit:

Table 1: Motorola Authorized Battery

Kit Number Description

PMNN4434_ Standard Li-Ion Battery

PMNN4453_ High Capacity Li-Ion Battery

Table 2: Motorola Authorized Charger

Kit Number Description

PMLN6383_ SUC Charging Tray

4

English

Table 3: Motorola Authorized Power Sources/Power Supplies

Part Number Manufacturer Part Number Description

25012026001 PSM08R-050MPN-R Power Supply, SMPS, 100-

240V, Universal, micro-USB

*PMPN4043_ FMP5538A Assembly, SMPS, 100-240V,

L5, 2.75W, micro-USB –

Europe

58012029004 RPE-N(MOS)-R Adapter, Power Supply,

Charger – Europe

58012029001 RPA(MOS)-R Adapter, Power Supply,

Charger – UK

PMLN6509_ PSM6509A-R Rapid Charging Power Supply

– EU/UK Adapter

PS00150A02 MU-08-L050150-C5 Rapid Charging Power Supply

– EU Adapter

PS00150A03 MU-08-L050150-B2 Rapid Charging Power Supply

– UK Adapter

Note*: Charger UL approved when shipped with this power supply.

Table 4: Motorola Authorized Programming Cable

Part Number Description

HKK4027_ CPS Cable Kit

5

English

OPERATING INSTRUCTIONS

CHARGING THE RADIO BATTERY

To charge the battery (with the radio attached), place it in a

Motorola-approved Drop-in Tray Single Unit Charger:

1. Place the drop-in tray charger on a flat surface.

2. Insert the connector of the power supply into the port on the side of

the drop-in tray charger.

Table 5: Motorola Authorized Cloning Cable

Part Number Description

HKK4028_ Cloning Cable Kit

Drop-in Tray

Charger Port

Drop-in Tray Charger

Power Supply

(Transformer)

6

English

3. Plug the AC adaptor into a power outlet.

4. Insert the radio into the tray with the front of the radio facing the front

of the charger, as shown.

Note: When charging a battery attached to a radio, turn the radio off to

ensure a full charge.

CHARGING A STAND-ALONE BATTERY

Align the

grooves on the

battery to the

rails in charger

7

English

Insert the battery into the tray with the front of the battery (label) facing the

front of the charger as shown.

ADAPTORS

Your power supply has a “switchable” capability which is compatible with any

of the adaptors that comes with your radio package.

The adaptor you choose to install depends on the region you are located in.

Proceed to install once you have identified the adaptor that matches your

electrical outlet.

Adaptor

Power Supply

Install

Remove

8

English

• Slide down the adaptor grooves into the power supply until it snaps

into place.

• Slide the adaptor upward to remove.

Note: The adaptor shown in the pictures are for illustration purposes.

TROUBLESHOOTING

When troubleshooting, always observe the color of the LED:

LED

Indication

Charger State Comment

Single

Flash

Green

Charger successfully powered

up and is ready for use.

The charger is ready for

use.

Off

No Battery in Pocket

• The Charger identified

the Battery as invalid or

damaged

• The Charger may have

detected an open or

shorted Battery contact

If a battery is in the pocket,

ensure that the power

supply is plugged into the

proper main outlet.

If the indication continues,

remove the battery.

Inspect the charger and

battery contacts to ensure

they are clean. Reinsert

the battery.

9

English

Amber

Slow Flash

Waiting to Rapid Charge

• Battery Under-Voltage

Recovery

• Battery too Cold,

Temperature <

approximately 5°C (or

value programmed in

battery)

• Battery too Hot,

Temperature ≥

approximately 45°C (or

value programmed in

battery)

• Thermistor short to

Battery (+)

Upon completion of

Under-Voltage Recovery,

once a cold battery warms

up or once a hot battery

cools down, the charger

automatically begins

Charging.

If Waiting to Rapid Charge

continues (e.g., more than

30 minutes), then remove

the battery. Inspect the

charger and battery

contacts to ensure they

are clean. Reinsert the

battery.

10

English

Red Fast

Flash

Fault

• The Charger identified

the Battery as invalid or

damaged

• The Charger may have

detected an open or

shorted Battery contact

• Excessive Power Supply

Voltage

• Battery Under-Voltage

Recovery Timeout

(15 minutes)

• Charging Issue

Remove the battery from

the pocket. Inspect the

charger and battery

contacts to ensure they

are clean. Reinsert the

battery.

If the indication continues,

disconnect the power

supply from the charger.

Verify that an authentic

Motorola Solutions power

supply is being used.

Inspect the power supply

and charger connectors to

ensure they are clean and

ready for use. Connect an

authentic Motorola

Solutions power supply to

the charger.

If the indication continues,

try using a different

Motorola Solutions

authorized battery.

If the indication continues

with a different battery,

contact your Motorola

Solutions representative.

11

English

Steady

Red

Charging The battery is charging.

Steady

Green

Nearly Charged or Charged The battery may be used.

LED Indication Battery State of Charge

Flash Green

3 Times

The battery is substantially charged. If followed by

the Solid Red Charging indication, allow time for the

battery to be fully charged. If followed by the Solid

Green Nearly Charged or Charged indication, some

additional time may be required to ensure that the

battery is fully charged.

Flash Amber

2 Times

The battery is moderately charged. Before heavy or

lengthy battery use, allow time for the battery to be

fully charged.

Flash Red

1 Time

The battery is substantially discharged. Before using

the battery, allow time for the battery to be fully

charged.

12

English

If there is NO LED indication:

1. Check that the radio with battery is inserted correctly.

2. Make sure that the power supply is plugged into an appropriate AC

outlet and the LED on the transformer is on.

3. Ensure that the power supply cable is plugged securely into the

charger socket.

4. Confirm that the battery used with the radio is listed in Table 1.

ESTIMATED CHARGING TIME

Charging Solution

Battery Type

Standard High Capacity

Switch Mode Charging Solution 4.5 hours 5.5 hours

Rapid Charging Solution 2 hours 3.5 hours

13

English

Limited Warranty for Motorola Personal Communications Products

Purchased

If your charger is defective, please contact your Motorola Partner where the

unit was purchased.

I. What Does This Warranty Cover?

• Products. Defects in materials and workmanship in wireless cellular

telephones, pagers and/or two-way radios and certain accessories that

are sold with them, such as the battery, battery charger and holster

manufactured and/or sold by Motorola (Products).

• Batteries. Defects in materials and workmanship in batteries that are

manufactured by Motorola and/or sold with Products are covered by this

warranty only if the fully-charged capacity falls below 80% of rated

capacity or they leak.

II. How Long Is The Period Of Coverage?

From the date the Products are purchased by the first end-user:

• Products. The warranty is for one year.

• Software. The warranty is for 90 days.

• Repairs/Replacements. The warranty is for the balance of the original

warranty or for 90 days from the date you receive it, whichever is longer.

III. Who Is Covered?

This warranty extends to the first end-user purchaser only.

IV. What Will We Do To Correct Warranty Problems?

At no charge to you, we have the option to repair or replace the Products or

software that do not conform to the warranty or to refund the Products’

14

English

purchase price. We may use functionally equivalent reconditioned,

refurbished, pre-owned or new Products or parts. No software updates are

provided.

V. How Can You Obtain Warranty Service or Other Information?

At no charge to you, we have the option to repair or replace the Products or

software that do not conform to the warranty or to refund the Products’

purchase price. We may use functionally equivalent reconditioned/

refurbished/pre-owned or new Products or parts. No software updates are

provided.

For product information please visit us at: www.motorolasolutions.com/

governmentandenterprise.

You will receive instructions on how to ship the Products to Motorola. You

must ship the Products to us with freight, duties and insurance prepaid. Along

with the Products you must include: (a) a copy of your receipt, bill of sale or

other comparable proof of purchase; (b) a written description of the problem;

(c) the name of your service provider (if this Product requires subscription

service); (d) the name and location of the installation facility (if applicable)

and, most importantly; (e) your address and telephone number. If requested,

you must also return all detachable parts such as antennas, batteries and

chargers. ALWAYS RETAIN YOUR ORIGINAL PROOF OF PURCHASE.

We will ship repaired or replacement Products at our expense for the freight

and insurance, but at your expense for any duties.

VI. What This Warranty Does Not Cover

• Products that are operated in combination with ancillary or peripheral

equipment or software not furnished by Motorola for use with the

Products (“ancillary equipment”) or any damage to the Products or

15

English

ancillary equipment as a result of such use. Among other things, “ancillary

equipment” includes batteries, chargers, adaptors and power supplies not

manufactured or supplied by Motorola. Any of these voids the warranty.

• Someone other than Motorola (or its authorised service centres) tests,

adjusts, installs, maintains, alters, modifies or services the Products in

any way. Any of these voids the warranty.

• Rechargeable batteries that: (a) are charged by other than the

Motorola-approved battery charger specified for charging such batteries;

(b) have any broken seals or show evidence of tampering; (c) are used in

equipment other than the Product for which they are specified; or (d) are

charged and stored at temperatures greater than 60 degrees centigrade.

Any of these voids the warranty.

• Products that have: (a) serial numbers or date tags that have been

removed, altered or obliterated; (b) board serial numbers that do not

match each other, or board serial numbers that do not match the housing;

or (c) non-conforming or non-Motorola housings or parts. Any of these

voids the warranty.

• Defects or damage that result from: (a) use of the Products in a manner

that is not normal or customary; (b) improper operation or misuse;

(c) accident or neglect such as dropping the Products onto hard surfaces;

(d) contact with water, rain, extreme humidity or heavy perspiration;

(e) contact with sand, dirt or the like or (f) contact with extreme heat, or

spills of food or liquid.

• Physical damage to the surface of the Products, including scratches,

cracks or other damage to a display screen, lens or other externally

exposed parts.

• Failure of Products that is due primarily to any communication service or

signal you may subscribe to or use with the Products.

16

English

• Coil cords that are stretched or that have any broken modular tabs.

• Products that are leased.

Flat-rate repair rates may apply to Products not covered by this warranty. To

obtain information about Products needing repairs that are not covered by

this warranty, please call the telephone number previously listed. We will

provide information on repair availability, rates, methods of payment, where to

send the Products, etc.

VII. Some Other Limitations

This is Motorola’s complete warranty for the Products and states your

exclusive remedies.

This warranty is given in lieu of all other express warranties. Implied

warranties, including without limitation, the implied warranties of merchant

ability and fitness for a particular purpose, are given only if specifically

required by applicable law. Otherwise, they are specifically excluded.

No warranty is made as to coverage, availability or grade of service provided

by the Products, whether through a service provider or otherwise.

No warranty is made that the software will meet your requirements or will

work in combination with any hardware or applications software products

provided by third parties, that the operation of the software products will be

uninterrupted or error free, or that all defects in the software products will be

corrected.

In no event shall Motorola be liable, whether in contract or tort (including

negligence) for damages in excess of the purchase price of the Product, or

for any indirect, incidental, special or consequential damages of any kind, or

loss of revenue or profits, loss of business, loss of information or data, or

other financial loss arising out of or in connection with the ability or inability to

use the Products, to the full extent these damages may be disclaimed by law.

17

English

VIII. Patent and Software Provisions

At Motorola’s expense, we will defend you and pay costs and damages that

may be finally awarded against you, to the extent that a lawsuit is based on a

claim that the Products directly infringe a patent. Our obligation is conditioned

on: (a) you notifying us promptly in writing when you receive notice of the

claim; (b) you giving us sole control of the defence of the suit and all

negotiations for its settlement or compromise; and (c) should the Products

become, or in Motorola's opinion be likely to become, the subject of a claim of

infringement of a patent, you permit us, at our option and expense, either to:

procure for you the right to continue using the Products; replace or modify

them so that they become non-infringing; or grant you a credit for such

Products, as depreciated, and accept their return. The depreciation will be an

equal amount per year over the lifetime of the Products, as established by

Motorola.

Motorola will have no liability to you with respect to any claim of patent

infringement that is based upon the combination of the Products or parts

furnished under this limited warranty with ancillary equipment, as defined in

Article VI above.

This is Motorola’s entire liability with respect to infringement of patents by the

Products.

Laws in certain countries preserve for Motorola and other third party software

providers certain exclusive rights for copyrighted software, such as the

exclusive rights to reproduce in copies and distribute copies of such software.

The software may be copied into, used in and redistributed with only those

Products that are associated with such software. No other use, including

without limitation, disassembly or reverse engineering of such software or

exercise of exclusive rights in such software is permitted.

18

English

Some countries and other jurisdictions do not allow the exclusion or limitation

of incidental or consequential damages, or limitation on the length of an

implied warranty, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other

rights, which vary from jurisdiction to jurisdiction.

www.motorolasolutions.com/XTseries

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are

trademarks or registered trademarks of Motorola Trademark Holdings, LLC

and are used under license. All other trademarks are the property of their

respective owners.

La pagina sta caricando ...

Motorola PMLN6393 Series Manuale utente

Motorola PMLN6393 Series Manuale utente

in altre lingue

Documenti correlati