RQT6683-2P
Model No. SC-PM18
SC-PM16
CD Stereo System
Operating Instructions
P PC
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
SC-PM16 is available in the U.S.A. only.
RQT6683(Cov).p65 3/24/03, 9:24 AM1
RQT6683
2
Before use
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
These operating instructions are applicable to the following
systems.
Table of contents
Before use
Supplied accessories ................................................. 3
IMPORTANT SAFETY INSTRUCTIONS ..................... 4
Listening caution ........................................................ 5
Placement of speakers ............................................... 5
The remote control ..................................................... 5
Connections ................................................................ 6
Front panel controls ................................................... 8
Listening operations
The radio: manual tuning ........................................... 10
The radio: preset tuning ............................................. 11
CDs ............................................................................... 12
Cassette tapes ............................................................. 17
Recording operations
Before recording ......................................................... 18
Recording from the radio ........................................... 19
Recording CDs ............................................................ 19
Timers and others
Using the built-in sound quality settings ................. 20
Enhancing the sound quality ..................................... 20
Using an external unit ................................................ 20
Auto-off function ......................................................... 21
Turning the demo function off ................................... 21
Setting the time ........................................................... 22
Convenient functions ................................................. 22
Using the timers .......................................................... 23
Reference
Troubleshooting guide ................................................. 25
Warranty (ONLY FOR U.S.A.) ....................................... 26
Specifications ................................................................ 27
Product Service .............................................. Back cover
Maintenance ................................................... Back cover
When moving the unit ................................... Back cover
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
The model number and serial number of this product can
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep
for future reference.
MODEL NUMBER
SERIAL NUMBER
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER MATE-
RIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
System SC-PM18 SC-PM16
Main unit SA-PM18 SA-PM16
Speakers SB-PM18 SB-PM18
RQT6683(2-10)new.P65 1/23/03, 4:42 PM2
RQT6683
3
Before use
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses
when asking for replacement parts.
(Only for U.S.A.)
To order accessories contact
1-800-332-5368 or web site
(http://www.panasonic.com).
Supplied accessories
AC power supply cord ...................................... 1 pc.
(K2CB2CB00006)
FM indoor antenna ............................................ 1 pc.
(RSA0006-L)
AM loop antenna ............................................... 1 pc.
(RSA0033A-1)
Remote control transmitter .............................. 1 pc.
(EUR7711020)
Remote control batteries................................ 2 pcs.
R6, AA, UM-3
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Any unauthorized changes or modifications to this
equipment would void the user’s authority to operate
this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
RQT6683(2-10)new.P65 3/24/05, 5:43 PM3
RQT6683
4
Before use
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable
safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Except for U.S.A.
Inside of product
RQT6683(2-10)new.P65 3/24/03, 9:26 AM4
RQT6683
5
Before use
The remote control
Battery installation
Use of batteries
• Align the poles (+ and –) properly when inserting the
batteries.
• Do not mix old and new batteries or different types of
batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow
them to contact flame or water.
• Remove the batteries if the unit is not to be used for a long
time.
• Do not keep together with metallic objects such as
necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can damage items the fluid contacts and may cause a
fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact
with any part of your body.
Correct method of use
Operation notes
• Do not place obstacles between the remote control signal
sensor and remote control unit.
• Do not expose the remote control signal sensor to direct
sunlight or to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and the
end of the remote control unit free from dust.
• If this system is installed in a rack with glass doors, the
glass doors’ thickness or color might make it necessary to
use the remote control unit a shorter distance from the
system.
To prevent damage
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.
Placement of speakers
Speakers are designed identically so that no left or right
channel orientation is necessary.
Notes
• Keep your speakers at least 10mm (
13
/32˝) away from the
system for proper ventilation.
• These speakers do not have magnetic shielding. Do not
place them near televisions, personal computers or other
devices easily influenced by magnetism.
• To avoid damage to the speakers, do not touch the
speaker cones if you have taken the nets off.
Selecting fine audio equipment such as the unit you’ve just
purchased is only the start of your musical enjoyment. Now
it’s time to consider how you can maximize the fun and ex-
citement your equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer Electronics
Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come
through loud and clear without annoying blaring or distor-
tion—and, most importantly, without affecting your sensi-
tive hearing.
We recommend that you avoid prolonged exposure to ex-
cessive noise.
Sound can be deceiving. Over time your hearing “comfort
level” adapts to higher volumes of sound. So what sounds
“normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe
level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing
damage or loss in the future. After all, we want you listen-
ing for a lifetime.
EST. 1924
Remote control
signal sensor
About 7 meters in
front of the signal
sensor.
Transmission
window
R6, AA, UM-3
Listening caution
RQT6683(2-10)new.P65 3/24/05, 1:56 PM5
RQT6683
6
Before use
Connections
• Plug the AC power supply cord into a household AC outlet
only after all other connections have been made.
• To prepare the AM loop antenna wire and speaker cords,
twist the vinyl cover tip and pull off.
1 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position
where radio signals are received with the least amount
of interference.
Note
For the best reception:
An FM outdoor antenna is recommended. (\ page 7)
2 Connect the AM loop antenna.
Stand the antenna up on its base. Keep loose antenna
cord away from other wires and cords.
3 Connect the speaker cords.
A Confirm the colors of the tags on the ends of the
cords.
B For White tags:
Connect cords to gray terminals.
For Blue, Black and Red tags:
Connect cords so tag colors match the terminal
colors.
Cords with white and blue tags are for high frequency.
Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
Caution
Use only the supplied speakers.
The combination of the main unit and speakers provide
the best sound. Using other speakers can damage the
unit and sound quality will be negatively affected.
4 Connect the AC power supply cord.
Note
The included AC power supply cord is for use with this
unit only. Do not use it with other equipment.
Red (
ªª
ªª
ª)
Black (
··
··
·) Black (
··
··
·)
Red (
ªª
ªª
ª)
1
2
3
AM loop antenna
Adhesive
tape
FM indoor
antenna
1
2
R
L
LOW (6
)
HIGH (6
)
Blue (–)
Black (–)
Red (+)
Gray (+)
White
Blue
Black
Red
A
B
1
2
1
3
2
1
2
3
4
Caution
• Use the speakers only with the
recommended system. Failure to do
so may lead to damage to the
amplifier and/or the speakers, and
may result in the risk of fire.
Consult a qualified service person if
damage has occurred or if you
experience a sudden change in
performance.
• Do not attach these speakers to walls
or ceilings.
(R)
(L)
RQT6683(2-10)new.P65 3/24/05, 1:46 PM6
RQT6683
7
Before use
Connections
Optional antenna connections
You may need an outdoor antenna if you use this system in
a mountainous region or inside a reinforced-concrete
building, etc.
FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor
antenna is installed.
Note
An outdoor antenna should be installed by a qualified
technician only.
AM outdoor antenna
Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally
along a window or other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna
to prevent possible damage that may be caused by
lightning. Never use an outdoor antenna during an electrical
storm.
External unit connections
• Make sure that the power supply for all components has
been turned off before making any connections.
• For details, refer to the operating instructions of the unit
which is to be connected.
• All peripheral components and cables sold separately.
Connecting analog equipment
This example shows how to connect an analog player with a
PHONO OUT/LINE OUT switch.
When units other than those described are to be connected,
please consult your audio dealer.
Note
• Only an analog player with a built-in phono equalizer can
be connected.
• Set the switch to the “LINE OUT” position at the back of
the analog player.
A
B
C
A
B
C
AUX
(L)
(R)
AM outdoor antenna
(not included)
AM loop antenna
(included)
Shield braid
Core wire
FM outdoor antenna
(not included)
5-12 m
(16-40 ft)
Analog player (not included)
"LINE OUT"
position
Rear panel of this unit
L
R
1
2
(1
3
/
16
"
)
(
19
/
32
"
)
RQT6683(2-10)new.P65 3/24/05, 1:44 PM7
RQT6683
8
Before use
Front panel controls
Main unit
Cassette lid
Cassette open button (c OPEN) ............................ 17
AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC
mains supply.
Standby/on switch (
POWER)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
Aux button (AUX) ..................................................... 20
CD skip/search, tape fast-forward/rewind/TPS, tune/
preset channel select, time adjust buttons
(f
33
33
3 /FF, g
44
44
4/REW ) ................ 10, 11, 12, 17, 22
CD check button (CD CHECK) ................................ 13
CD trays
Tape indicator
This indicator changes in the following manner:
Orange (when no cassette is inserted.)
Green (when cassette is inserted.)
Red (when in recording mode.)
Display
Recording start/pause button ([/ J REC) .............. 19
Super sound EQ button (S.SOUND EQ) ................. 20
Volume control (VOLUME DOWN, UP) ....... 10, 12, 17
CD tray open/close button (c OPEN/CLOSE) ....... 12
CD change button (c CD CHANGE) ....................... 13
Headphone jack (PHONES) ..................................... 20
Stop/program clear and demonstration button
(STOP L, –DEMO) ............................ 12, 16, 17, 19, 21
Tuner/band select button (TUNER/BAND) ............. 10
Cassette play button (TAPE 2 ) .............................. 17
CD play/pause button (CD 2/ J ) ............................. 12
Disc direct play buttons (CD 1~CD 5) .................... 12
PHONES
REW
FF
OPEN/CLOSE
CD CHANGE
CD CHECK
DEMO
DOWN
VOLUME
UP
AUX REC
POWER
AC IN
S.SOUND EQ
CD 1 CD 2 CD 3 CD 4 CD 5
STOP
TUNER BAND
CD
TAP E
DEMO
CD 1 CD 2 CD 3 CD 4 CD 5
STOP
TUNER BAND
CD
TAPE
)~+,
-
3
4
5
6
7
9
1
2
!
"
#
$
%
&
(
OPEN
8
RQT6683(2-10)new.P65 1/13/03, 4:19 PM8
RQT6683
9
Before use
SLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFF
DISC
PLAY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMER
DISPLAY
PRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
BAND
TAPE
0
CLEAR
4
~
5
#
.
/
:
;
<
=
>
?
@
[
\
]
,
+
$
6
Front panel controls
Remote Control
Buttons such as function in exactly the same way as the
buttons on the main unit.
Sleep timer/auto off button
(SLEEP, –AUTO OFF) ........................................ 21, 24
Disc button (DISC) ................................................... 14
Play mode select button
(PLAY MODE) ......................................... 10, 14, 15, 19
Use this for selecting repeat mode, CD play mode, tune
mode, FM mode and AM beat proof function.
CD Program, tuner preset button (PGM) ......... 11, 16
Muting button (MUTING) ........................................ 22
Preset EQ select button (PRESET EQ) ................. 20
Play timer/recording timer button
(
˚˚
˚˚
˚PLAY/REC) ........................................................... 23
Clock/timer button (CLOCK/TIMER) ........... 22, 23, 24
Numeric buttons ( 10, 1–9, 0)........................... 11, 15
Stop/program clear button (L CLEAR)...... 12, 16, 17
Dimmer button (DIMMER) .......................................22
Display button (DISPLAY) .......................................15
RQT6683(2-10)new.P65 3/24/05, 1:56 PM9
RQT6683
10
Before use
The radio: manual tuning
1 Press [TUNER/BAND] to select “FM” or “AM”.
The unit comes on automatically.
Every time you press the button:
FM ↔ AM
2 Press [PLAY MODE] on the remote control to
select “MANUAL”.
Every time you press the button:
MANUAL ↔ PRESET
3 Press [g
44
44
4/REW] or [f
33
33
3 /FF] to select
the frequency of the required station.
“ST” is displayed when a stereo FM broadcast is being
received.
4 Adjust the volume.
Auto tuning
Press and hold [g
44
44
4/REW ] or [ f
33
33
3 /FF] for a moment
until the frequency starts changing rapidly. The unit begins
auto tuning, stopping when it finds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [g
44
44
4/REW] or [f
33
33
3 /FF ]
once again.
If noise is excessive in FM
By remote control only
Press and hold [PLAY MODE] to display
“MONO”.
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press and hold [PLAY MODE] again to cancel the mode.
“MONO” goes out. MONO is also cancelled if the frequency
is changed.
Turn off “MONO” for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
FM allocation setting
By main unit only
By adjusting the allocation, you can enable this tuner to
receive FM broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER/BAND]. After a few seconds, the
display will change to a flashing display of the current mini-
mum FM frequency. If you continue to hold the button down,
the minimum frequency will change. Release the button at
this time.
To return to the original frequency indication, repeat above.
Note
•After changing the “allocation” setting, the frequencies you
previously preset in the memory will be cleared.
•Sound is momentarily interrupted if you load/unload a
cassette while listening to an AM broadcast.
A
2
3
4
1
SLEEP
CLOCKCLOCK
TIMER TIMER
PLAY
RECREC
AUTO OFF
DISCDISC
PLAY MODE
MUTINGMUTING
REWREW
S.SOUND EQS.SOUND EQ
DIMMERDIMMER
DISPLADISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
2
DOWN
VOLUME
UP
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
PLAY MODE
1
4
3
TUNER BAND
REW
FF
PLAY MODE
A
Listening operations
RQT6683(2-10)new.P65 3/24/05, 1:46 PM10
RQT6683
11
Listening operations
The radio: preset tuning
By remote control only
There are two methods of pre-setting stations.
Automatic presetting: All the stations the tuner can
receive are preset.
Manual presetting: You can select the stations to pre-
set and the order they are preset
in.
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select “FM” or “AM”.
A Automatic pre-setting
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where pre-setting is to begin (\ page
10).
Press and hold [PGM].
The tuner presets all the stations it can receive into the
channels in ascending order. When finished, the last station
memorized is tuned in.
Manual pre-setting
Pre-set the stations one at a time.
Press [PGM] then press [g
44
44
4/REW] or
[f
33
33
3/FF] to tune to the required station.
Press [PGM] then press [g
44
44
4/REW] or
[f
33
33
3/FF] to select a channel.
Press [PGM].
The station occupying a channel is erased if another station
is preset in that channel.
B Selecting channels
1 Press the numeric buttons to select the
channel.
For channels 1 to 9, press the corresponding number.
For channels 10 to 15, press [
10], then the two digits.
OR
Press [PLAY MODE] to select “PRESET”.
Press [g
44
44
4/REW] or [f
33
33
3 /FF] to
select the channel.
2 Adjust the volume.
A
B
1
2
/REW /FF
2
,
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMERDIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
PGM
TUNER/BAND
/REW /FF
,
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMERDIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
PLAY MODE
1
PGM
VOL
VOL
1
23
4
65
7
89
10
0
Preset channel
RQT6683(11-20)NEW.P65 3/24/05, 10:19 AM11
RQT6683
12
Listening operations
CDs
This unit can play CD-DA (digital audio) format audio
CD-R and CD-RW that have been finalized (a process
that enables CD-R/CD-RW players to play audio CD-R
and CD-RW) upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
The unit contains five CD trays.
You can simply listen to the CD on a single tray, or you
can select and listen to the CD in a particular tray. See
the section on All-Disc play (\ page 14) for information
on how to listen to all the CDs one after the next.
Listening to the CD on a single tray
1 Press [c OPEN/CLOSE] to open the disc tray
and insert the CD.
The unit comes on automatically and tray 1 opens.
Press [c
OPEN/CLOSE] again to close the tray.
2 Press [CD 2/J] to start play.
The selected CD is played from the first track to the last
track in order. After the last track, the player stops
automatically.
3 Adjust the volume.
To stop the disc
Press [STOP L, –DEMO].
To pause play
Press [CD 2/J]. Press [CD 2/J] again to resume play.
Skipping tracks
Press [ g
44
44
4/REW] (backward) or [f
33
33
3/FF] (forward).
Searching through tracks
During play or pause
Press and hold [ g
44
44
4/REW] (backward) or [f
33
33
3 /FF]
(forward).
CD indicator
The CD indicator on the display lights whenever the tray is
in the playing position whether it is loaded or not.
One touch play
If the unit is in standby mode and a CD is loaded, press
[CD 2/J] or [CD 1] ~ [CD 5].
The unit will come on automatically and play will start.
A CD selection and care
With this system, you can only play CDs having this mark ( )
Do not;
• use irregularly shaped CDs. ( )
• attach extra labels and stickers.
• use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers. ( )
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printers available on the
market.
To prevent damage
Always observe the following points.
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while tray is opening/closing, or
when loaded. Always unload all CDs before moving the
system.
• Do not put anything except a CD in the tray.
• Do not use cleaning CDs or CDs which are badly warped
or cracked.
• Do not disconnect the power cord from the household AC
outlet during CD changing operation.
A
1
2
3
DOWN
VOLUME
UP
a
b
c
2
1
3
(CD 1)
~
(CD 5)
/
REW
/
FF,
DEMOSTOP
,
OPEN/CLOSE
CD
CD indicator
Elapsed play time
Disc tray
Label must face upward.
Track number
RQT6683(11-20)NEW-1.P65 3/24/05, 10:42 AM12
RQT6683
13
Listening operations
1
2
3
4
A
DOWN
VOLUME
UP
CD CHECK
CD
/
DEMOSTOP
,
2 3
CD CHECK
1
4
CD CHANGE
CD 1 CD 2 CD 3 CD 4 CD 5
CD 1 CD 2 CD 3 CD 4 CD 5
CD CHECK
1
CD indicator
Elapsed play time
Track number
Disc tray
Label must face upward.
Tray
number
CDs
Listening to a CD placed in a
specific tray
Preparation: Press [CD 2/J] and then [STOP L, –DEMO].
Selecting the desired tray number and placing
a CD in it
1 Press [c CD CHANGE].
2 Within about 10 seconds
Press [CD 1] – [CD 5] to open the tray and
insert the CD.
Press [c CD CHANGE] again to close the tray.
Repeat steps 1 and 2 to insert other CDs. You can load
up to 5 CDs.
Listening to the CD placed in a specific tray
3 Press [CD 1] – [CD 5] to start play.
The selected CD is played from the first track to the last
track in order. After the last track, the player stops auto-
matically.
4 Adjust the volume.
To remove the CD
While one CD is playing (except in All-Disc Random play or
program play), you can change the CDs in the other trays.
1 Press [c CD CHANGE].
2 Press [CD 1] – [CD 5].
Press [c CD CHANGE] again to close the tray.
A To check which tray the CD is in (CD CHECK)
The CD check feature lets you check whether a 12cm CD is
in a tray.
Press [CD CHECK].
If the player is stopped, all trays will open.
If a CD is being played, the corresponding tray will not open.
Press [CD CHECK] again to close the trays.
• Do not remove or insert CDs during a CD check.
• Do not pull out the trays during a CD check.
RQT6683(11-20)NEW.P65 3/24/05, 1:47 PM13
RQT6683
14
Listening operations
CDs
Listening to specific CDs and tracks
(CD Play Mode function)
By remote control only
This function makes it easier for you to select specific CDs
and tracks from those loaded in the player.
There are 4 disc/track selection modes.
All-Disc mode : Plays all loaded discs in succession
from the selected disc to the final
disc
.
1-Disc Random mode : Plays one selected disc in random
order.
All-Disc Random mode : Plays all loaded discs in random
order.
1-Disc mode : Plays one selected disc.
1 Press [CD 2/J] and then [L CLEAR].
2 Press [PLAY MODE] to select the desired
mode.
Every time you press the button:
1-RANDOM A-RANDOMALL-DISC
1-DISC
ALL-DISC : All-Disc mode
1-RANDOM : 1-Disc Random mode
A-RANDOM : All-Disc Random mode
1-DISC : 1-Disc mode
(The original display is restored in about 2 seconds.)
Note
Proceed to step 5 if A-RANDOM was selected in this
step.
3 Press [DISC].
4 (Within 10 seconds)
Press [1]-[5] to select the disc.
The CD starts if 1-DISC, ALL-DISC or 1-RANDOM was
selected in step 2.
Note
Step 5 is not required if 1-DISC, ALL-DISC or
1-RANDOM was selected in step 2.
5 Press [CD 2/J].
The CD starts.
To stop play
Press [L CLEAR].
When playback ends
The current play mode will be retained.
Final disc
For example, if play starts from disc 4, disc 3 will be the “final
disc”.
Order of progression:
Disc 4z5z1z2z3
Note
• You can use the CD Play Mode function together with repeat
play.
• During 1-Disc Random play or All-Disc Random play, you
cannot skip to tracks which have already been played.
• During 1-Disc Random play or All-Disc Random play, you
can search forward or backward only within the current
track.
4
1
2
5
3
CD
1
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
4
15
3
2
1
23
4
5
CLEAR
PLAY MODE
DISC
CD
Specified disc indicator
RQT6683(11-20)NEW.P65 3/24/05, 10:20 AM14
RQT6683
15
Listening operations
CDs
Direct access play
By remote control only
Direct access allows you to start normal play from a specific
track to the last track of the CD.
1 Press [DISC].
2 (within 10 seconds or so)
Press [1] – [5] to select the disc you want.
3 Press the numeric button(s) to select the
desired track number.
Play will start with the track you select.
To select a two-digit track
Press [
10] and then the two numbers you want.
For example
Track no. 20: [
10]→[2]→[0]
Track no. 35: [
10]→[3]→[5]
Note
You cannot use direct access play with 1-Disc Random or
All-Disc Random mode.
Repeat play
By remote control only
A Press and hold [PLAY MODE] before or during play.
“REPEAT ON” and “ ” are displayed.
To cancel repeat play
Press and hold [PLAY MODE] once again. “REPEAT OFF”
is displayed and “
” is cleared.
To repeat your favorite tracks
1. Program the tracks you want (perform steps 1 ~ 6 on
page 16.)
2. Press and hold [PLAY MODE] and make sure “REPEAT
ON” and “
” are displayed.
3. Press [CD 2/J]. Playback will start.
To use repeat play with CD Play Mode function
Set the desired mode (A page 14), press and hold [PLAY
MODE] before or during playback, and make sure “REPEAT
ON” and “
” are displayed.
B CD display
By remote control only
This function allows you to display the remaining play time
of the current track.
During play or pause mode
Press [DISPLAY].
Every time you press the button:
Elapsed play time ↔ Remaining play time
Note
When track number 25 or greater is playing, remaining play
time display shows “– –:– – ”.
A
B
1
2
3
1
23
4
5
1
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMERDIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
PLAY MODE
3
2
CD
CD
DISPLAY
/
DISC
PLAY MODE
DISPLAY
1
23
4
65
7
89
10
0
Remaining play time
RQT6683(11-20).P65 3/24/05, 10:50 AM15
RQT6683
16
Listening operations
A
B
1
2
5
CD
CD
7
3
4
3
2
1
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
5
4
CD
/
REW
,
/
FF
1 7
PGM
1
23
4
5
1
23
4
65
7
89
10
0
CLEAR
DISC
CDs
Program play
By remote control only
This function allows you to program up to 24 tracks.
1 Press [CD 2/ J ] and then [L CLEAR].
2 Press [PGM].
3 Press [DISC].
4 (within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5 Press the numeric button(s) to select the
track you want to play in the desired
sequence.
6 Repeat steps 3 through 5 until you have
programmed all the tracks you want.
7 Press [CD 2/ J ].
Play will start in the programmed sequence.
To cancel program play mode
Press [PGM] in the stop mode.
Programmed contents will be saved in memory.
To clear all programmed tracks
Press [L CLEAR] in the stop mode. “CLEAR” is displayed.
To select a two-digit track
Press [
10] and then the two numbers you want.
A When “CD FULL” appears
The number of programmed tracks is limited to 24. No
further tracks can be programmed.
B You can do the following during program mode:
• Check program contents.
Press [g
44
44
4/REW] or [f
33
33
3/FF].
Every time you press one of the buttons, the track and
program No. are shown on the display.
• Add to the program.
Repeat steps 3 through 5.
Memory retention
Your program is retained in memory for about 1 week while
the system is unplugged.
To replay your program
If you turned OFF your program with [PGM], you can play it
again as explained below.
1. Press [PGM].
2. Press [CD 2/ J].
If you program a track not on your CDs
The track is initially programmed, but during program play,
the player will skip that track and will continue playing from
the next programmed item.
Note
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
Specified track
number
Program order
Indicates program mode
RQT6683(11-20)NEW.P65 3/24/05, 10:20 AM16
RQT6683
17
Listening operations
1
2
3
B
2
3
/
REW
/
FF,
DEMOSTOP
,
OPEN
TAPE
DOWN
VOLUME
UP
OPEN
1
Cassette tapes
1 Press [c OPEN], insert a cassette with the
tape facing in.
When the button is pressed, the unit comes on
automatically.
Make sure the cassette is fully inserted and close the
lid by hand.
2 Press [TAPE 3] to start playback.
3 Adjust the volume.
To stop tape playback
Press [STOP L, –DEMO].
One-touch play
When the system is OFF and a cassette is already inserted,
play starts automatically when you press [TAPE 3].
Fast-forward and rewind
Press [g
44
44
4/REW] (rewind) or [f
33
33
3 /FF] (fast-forward)
in stop mode.
Cassette tape selection and care
Types of tapes which can be played correctly.
The system automatically identifies the type of tape.
NORMAL POSITION/TYPE I ✓
HIGH POSITION/TYPE II ✕
METAL POSITION/TYPE IV ✕
High position and metal position tapes can be played, but
the unit will not be able to do full justice to the characteristics
of these tapes.
• Tapes exceeding 100 minutes are thin and can break or
get caught in the mechanism.
• Tape slack can get caught up in the mechanism and
should be wound up before the tape is played.
• Endless tapes can get caught up in the deck’s moving
parts if used incorrectly.
To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from
there. Each press increases the number of tracks skipped,
up to a maximum of 9.
Press [g
44
44
4/REW ] or [f
33
33
3 /FF] during play.
Notes
The TPS function searches for silent parts of about 4
seconds in length which are normally found between tunes.
As a result, it may not function properly in the following
cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
Forward side
Insert inside the
guides
RQT6683(11-20).P65 1/13/03, 4:32 PM17
RQT6683
18
Listening operations
B
A
B
C
3
1
OPEN
OPEN
OPEN
Before recording
Types of tapes which can be recorded correctly
The system automatically identifies the type of tape.
NORMAL POSITION/TYPE I ✓
HIGH POSITION/TYPE II ✕
METAL POSITION/TYPE IV ✕
High position and metal position tapes can be used, but the
unit will not be able to record or erase them correctly.
Erasure prevention
The illustration shows how to remove the tabs to prevent re-
cording. To record on the tape again, cover as shown.
The effect of volume and sound quality on
recording.
These have no effect on recording.
They can be changed for playback.
To erase a recorded sound
Press [TAPE -] and then [STOP L, –DEMO].
Insert the recorded cassette with the tape facing in.
Press [[/ J REC].
Preparatory steps
Do these steps before each recording.
Wind up the leader tape so recording can begin
immediately.
Press [c OPEN], insert a cassette with the tape
facing in.
Make sure the cassette is fully inserted and close the lid by
hand.
A
B
Recording operations
Side A
Tab for side B Tab for side A
To re-record
Normal position tape
C
Side to be recorded
facing up
Insert inside the guides
To protect tapes against further recording
Adhesive tape
RQT6683(11-20).P65 1/13/03, 4:32 PM18
RQT6683
19
Listening operations
2
2
A
B
C
DEMOSTOP
,
2
DEMOSTOP
,
2
REC
REC
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMERDIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
PLAY MODE
Recording operations
Recording from the radio
Preparation: Do the preparatory steps (\ page 18).
1 Tune to the required station.
(\ page 10 or 11)
2 Press [[/ J REC] to start recording.
To stop recording
Press [STOP L, –DEMO].
To stop recording temporarily
Press [[/ J REC].
To resume recording, press [[/ J REC].
To cut an unnecessary part while recording
1. Press [[/J REC] during the unnecessary part. The
cassette deck will go into the stop mode.
2. Press [[/ J REC] to resume recording again.
To record on the other side of the tape
Turn the tape over and press [[/ J REC].
Note
When recording an AM broadcast, sound is momentarily
interrupted when you start and stop the recording.
B To reduce noise while recording an AM broadcast
(Beat proof function)
By remote control onlyly
Press and hold [PLAY MODE] while recording.
Every time you press the button:
BP1 ↔ BP2
Select the position where there is less noise.
C Recording CDs
You can use 1-DISC/ALL-DISC mode (A page 14) to make
recordings.
Preparation:
• Do the preparatory steps (A page 18).
• Insert the CD(s) you want to record (A page 12).
1-DISC/ALL-DISC recording
1 Do steps 1 to 4 on page 14.
Ensure CD is stopped.
2 Press [[/ J REC] to start recording.
The CD starts.
To stop recording
Press [STOP L, –DEMO].
CD play stops automatically.
To stop recording temporarily
Press [[/ J REC].
To resume recording, press [[/ J REC].
If the tape finishes before the CD
The CD continues playing. Press [STOP L, –DEMO] to stop
it.
To record programmed tracks
Program the tracks (A page 16).
Press [[/ J REC] to start recording.
Play starts.
To stop recording, press [STOP L, –DEMO].
Disc play stops automatically.
A
RQT6683(11-20)NEW.P65 3/24/05, 10:20 AM19
RQT6683
20
Listening operations
C Using an external unit
Listening to an external source
(See page 7 for external unit connection.)
Press [AUX].
Start playback from the external source. (Refer to your
equipment’s operating instructions.)
Recording from an external source
Insert the tape to be recorded on.
Press [AUX].
Press [[/ J REC] (recording starts).
Start playback from the external source. (Refer to your
equipment’s operating instructions.)
Listening with headphones
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm (1/8˝) stereo.
Note
Avoid listening for prolonged periods of time to prevent
hearing damage.
D
Using the built-in sound
quality settings
By remote control only
You can choose one of three types of sound quality.
HEAVY: Adds punch to rock
CLEAR: Clarifies higher sounds
SOFT: For background music
Press [PRESET EQ] to select a setting.
Each time you press the button:
HEAVY CLEAR SOFT
EQ-OFF (cancelled)
Note
• Preset EQ cannot be used together with Super Sound
EQ.
• Changes to sound quality do not affect recordings.
B Enhancing the sound quality
C
A
D
B
PRESET EQ
S.SOUND EQ
SLEEP
CLOCKCLOCK
TIMER TIMER
PLAY
RECREC
AUTO OFF
DISCDISC
PLAY MODE
MUTINGMUTING
REWREW
S.SOUND EQS.SOUND EQ
DIMMERDIMMER
DISPLADISPLAY
PRESET EQPRESET EQ
FFFF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
S.SOUND EQ
S.SOUND EQ
REC/
AUX
PRESET EQ
Headphones
(not included)
Timers and others
This feature enhances the bass and treble effect of the
sound.
Press [S.SOUND EQ].
Press the button again to cancel.
The button light goes out.
A
RQT6683(11-20)NEW.P65 3/24/05, 10:20 AM20
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Panasonic SC-PM18 Manuale utente
- Categoria
- Lettore CD
- Tipo
- Manuale utente
in altre lingue
- English: Panasonic SC-PM18 User manual
Documenti correlati
-
Panasonic SCPM18GN Manuale del proprietario
-
-
-
-
-
-
-
-
Panasonic SCPM71SD Manuale del proprietario
-