Optimus DP-0206 Manuale utente

SOFTWARE INSTRUCTION MANUAL

DIGITAL PROCESSOR DP-0206

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

DACsys2000

Version 2.00

2

TABLE OF CONTENTS

1. Before installation ................................................................................... 3

2. Installation method ................................................................................... 4

3. Launching the application ................................................................................... 8

4. Main window ................................................................................... 9

5. Outline of the menu functions ................................................................................... 10

6. Unit operation ................................................................................... 13

7. Unit Viewer ................................................................................... 18

8. Memory Viewer ................................................................................... 20

9. Flow Viewer ................................................................................... 21

10. Contents Viewer ................................................................................... 23

11. Response Viewer ................................................................................... 38

12. Preset Memory ................................................................................... 41

13. Level Monitor Viewer ................................................................................... 42

14. Mute All Window ................................................................................... 43

15. Communications ................................................................................... 44

16. User Level ................................................................................... 46

17. Prohibition Settings ................................................................................... 48

18. Print ................................................................................... 50

19. Export ................................................................................... 51

20. DQ-C01 Settings ................................................................................... 52

21. Supplement ................................................................................... 60

22. Specifications ................................................................................... 62

3

1. Before installation

DACsys 2000 is software created to allow you to change settings for the DP-0206.

This setting software can be used in the following environments: Microsoft Windows

95/Windows 98/Windows ME/Windows NT Ver. 4.0/Windows 2000.

The format for the floppy disk is 1.44 megabytes (MS-DOS format for IBM compatibles).

Make sure your machine is an IBM compatible capable of formatting 3.5-inch floppy disks at

1.44 megabytes (MS-DOS format). This software will not operate on a machine that operates

under a different format.

4

2. Installation method

There are two installation disks (labeled Disk 1 of 2 and Disk 2 of 2).

Proceed with installation as follows:

Be sure to close any applications that are running before beginning the installation process.

1. Click the

button on the

screen and select Settings

→

Control Panel. The window shown

at right will appear.

2. Double-click the icon

in the Control Panel window to

display the window shown at right.

5

3. Click . The window

shown at right will appear.

4. At this point, insert the system disk (Disk 1 of 2) in the floppy-disk drive and click

.

5. The system will search the setup

program, and the window shown at

right will appear. Then click

.

6. During the preparation for

installation, the window shown at

right will be displayed.

6

7. If the window shown at right

appears, carefully read the

information in the window and then

click

.

8. Carefully read the information in

the window and then click

.

9. If the window shown at right

appears, remove the disk (Disk 1

of 2) from the drive and insert Disk

2 (Disk 2 of 2), then click “OK”.

7

10. If the message indicating

completion of setup appears, click

.

8

3. Launching the application

To launch the application once it has been installed, follow either of the two procedures

described below:

1. Create a desktop shortcut and launch the application by clicking its icon.

Drag the icon DACsys 2000 (which will be displayed immediately when installation is

completed) with the mouse while holding the Ctrl key pressed and drop it onto the desktop (to

copy the icon). This will set it up as a shortcut on your desktop. Then launch the application

by double-clicking this shortcut icon.

2. Proceed in steps from the Windows Start button.

Click

on the screen the select Program → TOA Digital Audio Control → DACsys2000

to launch the application.

9

4. Main window

The window shown below will appear when the application is launched.

Unit Viewer

Memory Viewer

Flow Viewer

Contents Viewer

Status Bar

Menu Bar

Toolbar

10

5. Outline of the menu functions

File

New... : Creates (sets) a new data file

Open... : Opens an already existing data file

Save : Saves the data file in use on a disk

Save As... : Saves the data file in use on a disk under a different name

Export... : Exports the data of the active document as the Microsoft

Excel data. The menu regarding the export appears only

when the Microsoft Excel is installed in the PC.

Page Settings... : Changes the print margin.

Print... : Prints the active document

Print Preview... : Displays full pages

Exit : Closes the application

Edit

Undo : Undoes the last action

Redo : Redoes the previously undone action

Cut : Saves the setting value in the box in which the cursor is

located on the clipboard and restores the initial value

Copy : Copies the setting value in the box in which the cursor is

located on the clipboard

Paste : Pastes the data on the clipboard into the box in which the

cursor is located

Clear : Restores the setting value in the box in which the cursor is

located to the default value

Swap Gain < - > C/G : Makes the Gain and C/G boxes trade positions

Filter Type

è PEQ : Changes the box in which the cursor is located to a PEQ box

(with the default setting for PEQ)

è GEQ : Changes the box in which the cursor is located to a GEQ box

(with the default setting for GEQ)

è Filter : Changes the box in which the cursor is located to a Filter box

Split

è PEQ+Filter : Filter is divided into PEQ and Filter

è GEQ+Filter : Filter is divided into GEQ and Filter

è Filter+Filter : Filter is divided into Filter and Filter

Merge : Unites with one Filter

11

Set Grouping... : Creates a box group

Release Grouping : Releases the boxes of the current group and cancels the

group

Write Protect to Box

è Low : The operator is prohibited from changing of the parameter of

Box

è Mid : The operator is prohibited from changing of Box all

è High : The change of the parameter in Box by Administrator is

prohibited, and the operator is prohibited from changing all.

View

Toolbar : Shows/hides the toolbar

Status Bar : Shows/hides the Status Bar

Unit View : Shows/hides the Unit Viewer

Contents View : Shows/hides the Contents Viewer

Response View : Shows/hides the Response Viewer(p. 38)

Memory View

è Show/Hide : Shows/hides the Memory Viewer

è Floating : Floats the Memory Viewer

è Docking : Docks the Memory Viewer

Mute All

è Show/Hide : Shows/hides the Mute All Window(p. 43)

è Floating : Floats the Mute All Window

è Docking : Docks the Mute All Window

Level Monitor View : Shows/hides the Level Monitor Viewer

Unit

Create New Unit... : Creates a new unit

Delete Unit : Deletes the unit from the data file

Change Unit Configuration... : Changes the number of inputs and outputs of existing units

Change X-over

è Combination... : Changes the combination of the crossover

è Slope... : Changes the slope of the crossover

Names... : Changes the names of the unit and the inputs and outputs

Save as a Unit Template

è Unit Template... : Saves the unit settings in a file as a template

è X-over Template... : Saves the crossover settings in a file as a template

12

Memory

Change

è Memory1 - 16 : Recalls a preset from one of the 16 preset -memory cells

Store

è Memory1 - 16 : Stores the status in one of the 16 preset -memory cells

Names... : Changes the name of a memory cell

Remote

Connect... : Connects the PC with the unit to set online status

Disconnect : Breaks the connection between the PC and the unit for off-

line status (any changes in settings made at the PC when

off-line will not affect the unit's settings)

Bulk transmission... : The data of the file which is opening now is compelling

transmitted

Bulk receiving... : All the data of the unit is received

Auto Connection... : Next time, when the file is opened, connects it automatically

Option

Security Settings... : Setting the user level and the prohibition setting of various

operations are done.

External Control... : Makes the setting of the external control

Help

About : Displays the version of DACsys 2000

13

6. Unit operation

Creating a unit

1. Select from the menu bar Unit → New... to open the Unit Configuration window.

2. In the Unit Configuration window, first input the name of the unit then select a unit ID.

3. Select the number of inputs and outputs from among 2 x 6, 2 x 8, 2 x 10, 4 x 6, 4 x 8, and 6 x

6. The initial value is 2 x 6. When using an already existing template file, select "Create from

Template". You can directly input a filename, or you can make a selection from the dialog box,

which can be displayed by clicking the

part.

14

4. Click “Next”. The X-over Combination window will appear.

5. Make the crossover combination settings by first clicking the appropriate spaces. The setting

status is displayed in the right-hand portion of the window. Below is an example of a 3-

way/2-channel setup when 6 outputs are in use.

15

6. Click “Next”. The X-over Slope window will then appear.

7. Make the X-over slope settings by clicking the appropriate check boxes. The settings status

for each output is displayed in the right-hand portion of the window.

8. When using an existing template file, click the check box for the corresponding channel's

“Template”. You can directly input a filename, or you can make a selection from the dialog

box, which can be displayed by clicking the

part.

16

9. Check the correctness of your settings and click “Finish”. The Signal Flow area will appear,

as shown in the figure below.

Deleting a unit

Select the unit you wish to delete in the Unit Viewer or Flow Viewer. From the menu bar, select

Unit

→ Delete... to display a confirmation dialog box. Click “OK” to delete the selected unit.

Changing the number of inputs and outputs of the unit

You can change the number of inputs and outputs of an already created unit. Select the unit

whose input/output number you want to change in the Unit Viewer or Flow Viewer.

From the menu bar, select Unit

→ Change Unit Configuration... to display the Unit Configuration

window.

Then make the settings just as you would when creating a unit.

Changing the Crossover Combination

You can change the crossover combination of an already created unit.

Select the unit whose crossover combination you want to change in the Unit Viewer or from the

Flow Viewer.

From the menu bar, select Unit

→ Change X-over → Combination... to display the Crossover

Combination window. Then make the settings as in the creation procedure.

17

Changing the Crossover Slope

You can change the crossover slope of an already created unit. Select the unit whose crossover

slope you want to change in the Unit Viewer or Flow Viewer.

From the menu bar, select Unit

→ Change X-over → Slope... to display the Crossover Slope

window. Then make the settings as in the creation procedure.

Changing the name of the unit

Select the unit whose name you want to change in the Unit Viewer or Flow Viewer.

From the menu bar, select Unit

→ Names... to display the Change Name dialog box.

Saving a unit as a template

Select the unit you want to save as a template in the Unit Viewer or Flow Viewer.

From the menu bar, select Unit

→ Save as a Unit Template → Unit Template... to display the Save

File dialog box.

Saving the Crossover settings as a template

Select the Crossover box you want to save as a template in the Flow Viewer.

From the menu bar, select Unit

→ Save as a Unit Template → X-over Template... to display the

Save File dialog box.

18

7. Unit Viewer

This section explains about the Unit Viewer.

The units are displayed in one column. It is possible to display up to 30 units.

There are two display modes. You can switch between them by clicking the tab at the bottom.

List display

It is possible to reduce size of the signal-processing image of the units and display up to 30 units.

The unit name, the number of inputs and outputs, the matrix settings, and the crossover

combination information will be displayed abbreviated. By clicking an already created unit, you

can scroll through a linked Flow Viewer.

In the list display, the unit can be copied onto an empty unit by the created unit drag & drop.

19

Tree display

You can display up to 30 units in a comparatively small display area. The unit names will be

displayed in a tree format. By clicking an already created unit, you can scroll through a linked

Flow Viewer.

20

8. Memory Viewer

This section explains about the Memory Viewer.

The name and numbers of selected memory cells are displayed. By recalling a memory cell you

can make additions to that cell or compare the content of memory cells.

- The memory cell number selected in the Memory list box is highlighted in bold letters.

- To recall a memory cell, click the desired memory cell number then click “Change”.

- To write to a memory cell, click the number of the memory cell in which you wish to store the

information then click “Store”.

- To perform memory comparison, click the number of the memory cell to compare and click

“Compare”. The display will then be switched temporarily to the selected preset memory number.

To compare the content of a memory with that before edit, click the number of the memory cell

highlighted in bold letters and click “Compare”. The previous status will be restored when you

once again click “Compare”.

- The Memory area can be switched between docked and floating indications.

Memory list

Change button

Store button

Compare button

La pagina sta caricando ...

Optimus DP-0206 Manuale utente

Optimus DP-0206 Manuale utente

in altre lingue

Altri documenti