Ubiquiti UniFi UAP Manuale utente

Enterprise WiFi System

Models: UAP, UAP-LR (Long Range)

i

Table of ContentsUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Table of Contents

Chapter 1: Product Overview .......................................1

Package Contents ................................................................1

System Requirements ............................................................1

Network Topology Requirements .................................................1

Front .............................................................................2

Back .............................................................................2

Chapter 2: Installation ..............................................3

Hardware Installation .............................................................3

Software Installation ..............................................................5

Chapter 3: Using the UniFi Controller Software ......................7

Interface Tabs ....................................................................7

Common Interface Options .......................................................7

Recent Events ....................................................................7

Settings ..........................................................................8

Admin ..........................................................................12

Chapter 4: Map Tab ................................................13

Adding Custom Maps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Adding a Google Map™ ..............................................14

Placing Access Points on the Map ................................................16

Setting the Map Scale ...........................................................18

Chapter 5: Statistics Tab ...........................................20

Clients ..........................................................................20

Quick Look ......................................................................20

Current Usage - Top Access Points ...............................................21

Recent Activities .................................................................21

Chapter 6: Access Points Tab .......................................22

Chapter 7: Users Tab ...............................................23

Chapter 8: Guests Tab .............................................24

Chapter 9: Offline Clients Tab ......................................25

Chapter 10: Access Point Details ...................................26

Details .........................................................................26

Users ...........................................................................27

Guests .........................................................................28

Configuration ..................................................................28

ii

Table of ContentsUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Chapter 11: User/Guest Details ....................................34

Details ..........................................................................34

Statistics ........................................................................34

History ..........................................................................35

Configuration ...................................................................35

Chapter 12: HotSpot Manager .....................................36

Appendix A: Portal Customization .................................38

Overview ........................................................................38

Enabling Portal Customization ...................................................38

Viewing the Default Portal .......................................................38

Setup ...........................................................................38

Appendix B: UniFi Discovery Utility ................................40

Overview ........................................................................40

Appendix C: Specifications ........................................42

Appendix D: Safety Notices ........................................44

Electrical Safety Information .....................................................44

Appendix E: Warranty .............................................45

General Warranty ................................................................45

Appendix F: Compliance Information ..............................46

Installer Compliance Responsibility ..............................................46

FCC .............................................................................46

Industry Canada .................................................................46

RF Exposure Warning ............................................................46

CE Marking ......................................................................46

RoHS/WEEE Compliance Statement ..............................................46

Appendix G: Declaration of Conformity ............................48

Appendix H: Contact Information ..................................49

Ubiquiti Networks Support ......................................................49

1

Chapter 1: Product OverviewUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Chapter 1: Product Overview

Thank you for purchasing the Ubiquiti UniFi Enterprise

WiFi System. The UniFi Enterprise WiFi System includes

the UniFi Controller software that allows you to manage

your wireless network using your Web browser.

This User Guide is for use with version 2.0 or above of

the UniFi Controller software with the following UniFi

Enterprise WiFi System Access Point models:

Model

Maximum Power

Consumption

Maximum TX

Power

UniFi AP

(UAP)

4W 20 dBm

UniFi AP Long Range

(UAP-LR)

6W 27 dBm

Unless otherwise needed to specify differences between

the two models, this Quick Start Guide will refer to both as

UniFi AP.

The UniFi Enterprise WiFi System also includes the

necessary hardware for mounting the unit on a wall or a

ceiling. The UniFi Enterprise WiFi System supports Passive

PoE which works with the included PoE adapter. If you

want to power the UniFi AP from an 802.3af compliant

switch, Ubiquiti Networks offers the optional Instant

802.3af Adapter to instantly transform any PoE device into

a fully 48V 802.3af compliant product. Product details are

available on our website at http://ubnt.com/8023af

Package Contents

Wall Mount

UniFi AP Wall-Mount Bracket Ceiling-Mount Plate

UniFi Controller

CD with User Guide

Quick Start Guide

24v PoE

Adapter

Power Cord

M3X30 Flat Head

Screw (Qty. 3)

M3 Keps Nut with

Tooth Washer

(Qty. 3)

M2.9x20 Self Tapping

Screw (Qty. 3)

M3x20 Screw

Anchor (Qty. 3)

System Requirements

 Microsoft Windows XP, Windows Vista, Windows 7, or

Mac OS X

 Java Runtime Environment 1.6 (or above)

 Web Browser: Mozilla Firefox, Google Chrome, or

Microsoft Internet Explorer 8 (or above)

Network Topology Requirements

 A DHCP-enabled network (for the wired Access Point to

obtain an IP address as well as for the wireless Access

Points after the deployment).

 Access Point(s) and either an on-site management

station computer running the UniFi Controller software

connected to the same Layer-2 network or located in an

off-site cloud or NOC.

or

Router

O-Site

Cloud/NOC

2

On-Site

Management Station

Wired UAP/UAP-LR

Wireless

Uplinked

1

UAP/UAP-LR

Sample Network Topology

¹ Please refer to “Wireless Uplinks” on page 31 for

setting up Wireless-Linked APs.

² All UniFi APs support Off-Site Management Controllers.

2

Chapter 1: Product OverviewUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Front

LED Indicates the status of the device. See

the table below for details.

LED Color Status

Flashing Amber Initializing

Steady Amber Factory default, waiting to be integrated

Alternating

Amber/Green

Device is busy, do not touch or unplug it,

this usually indicates a process such as a

firmware upgrade is taking place

Quickly Flashing

Green

This is used to locate an AP.

When you click on Locate in the UniFi

Controller software, the AP will blink. It will

also display the location of the AP on the

map.

Steady Green

Indicates the device has been successfully

integrated into a network and is working

properly.

Steady Green

with occassional

flashing

Indicates the device is in an isolated state

(all WLANS are brought down until an

uplink is found).

Back

Ethernet Port Connects to the 24v PoE

Adapter to provide power to the unit.

Reset Button The reset button serves two functions:

 Restart It will restart the device when you press

and release it quickly.

 Restore Factory Defaults When you press and

hold it for more then 5 seconds, it will restore the

device to the factory default settings.

3

Chapter 2: InstallationUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Chapter 2: Installation

Hardware Installation

The UniFi Enterprise WiFi System is powered by the

included PoE (Power over Ethernet) adapter. To install the

AP, perform the following steps:

1. Connect an Ethernet cable to the Ethernet port on the

UniFi Enterprise WiFi System.

2. Connect the power cord to the power port on the PoE

Adapter. Connect the other end to of the power cord to

a power outlet.

3. Connect the other end of the Ethernet cable to the

Ethernet port labeled PoE on the PoE Adapter.

Note: If you plan to mount the AP on your

ceiling, perform the ceiling mount installation

steps before connecting the Ethernet cable to

the PoE Adapter.

Below is an overview of the Power over Ethernet

connections.

Power Connection Diagram

Mounting the Access Point

The UniFi Enterprise WiFi System can be wall-mounted or

mounted on a ceiling. Perform the following steps for the

appropriate installation:

Wall-Mount

1. Align the wall-mounting bracket with the Wall Mount

text facing up. There are horizontal and vertical lines on

the bracket to help with orientation.

Wall Mount

Wall Mount text

2. Use a pencil to mark the holes on the wall.

3. Use a 6 mm drill bit to drill the holes in the wall.

4. Insert the 3 screw anchors into the wall.

5. Secure the wall-mount bracket to the wall by inserting

the self tapping screws into the anchors.

Wall Mount

4

Chapter 2: InstallationUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

6. Align the notches on the AP with the notches on the

wall-mount bracket.

Wall Mount

7. Turn the AP clockwise until it locks into place.

Wall Mount

Ceiling-Mount

1. Remove the ceiling tile.

2. Align the ceiling-mount plate to the center of the top

side of the ceiling tile.

3. Use a 3.5 mm drill bit to drill holes for the three flat

head screws.

4. Cut or drill a circle approximately 25 mm in size that

lines up with the larger circle on the ceiling-mount

plate. This will be used for the Ethernet cabling.

5. Secure the wall-mount bracket and ceiling-mount plate

to the ceiling tile using the 3 flathead screws and 3 nuts

with tooth washers.

6. Feed the Ethernet cable through the hole and then

align the UniFi AP with the notches on the wall-mount

bracket.

Note: The UniFi AP supports Passive PoE which

works with the included PoE adapter. If you

want to power the UniFi AP from an 802.3af

compliant switch, Ubiquiti Networks offers the

optional Instant 802.3af Adapter to instantly

transform any PoE device into a fully 48V

802.3af compliant product.

Product details are available on our website at

http://ubnt.com/8023af

7. Turn the AP clockwise until it locks into place.

5

Chapter 2: InstallationUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Software Installation

Insert the UniFi Controller software CD into your CD-ROM

drive and follow the instructions for your specific

computer type.

Mac Users

1. Click on the Install icon.

2. Click Continue and follow the on-screen instructions to

install the software.

3. Go to Go > Applications and double-click the UniFi

icon.

Proceed to “Configuring the UniFi Controller Software”

on page 6.

PC Users

1. Launch UniFi-installer.exe.

2. Click Install.

3. If your computer doesn’t have Java 1.6 or above

installed, you will be prompted to install it. Click Install

to continue.

4. Click Next.

5. Be sure the Start UniFi Controller after installation option

is checked and click Finish.

Note: The UniFi Controller software can also be

launched from Start > All Programs > Ubiquiti

UniFi.

6

Chapter 2: InstallationUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Configuring the UniFi Controller Software

1. The UniFi Controller software startup will begin. When

the option becomes available, click Launch a Browser

to Manage Wireless Network.

2. Select your language and country. Alternatively you

can restore from a previous backup by clicking Browse.

Click Next.

3. Select the devices that you want to configure and click

Next.

4. The UniFi Installation Wizard will create a secure

primary wireless network for your devices. Perform the

following steps:

a. Enter a unique wireless network name (SSID) in the

Secure SSID field.

b. Enter a unique passphrase to be used for your

primary network in the Security Key field.

c. To enable guest access, select Enable Guest Access

and enter a guest network name in the Guest SSID

field.

d. Click Next.

5. Enter an admin name in the Admin Name field and

password in the Password field to use when accessing

the management interface. Confirm your password in

the Confirm field. Click Next.

6. On the Finish tab, review your settings. Click Back to

make changes or Finish to save your settings. Once

finished you will be redirected to the management

interface via your web browser.

Congratulations, your wireless network is now configured.

A login screen will appear for the UniFi Controller

management interface. Enter the admin name and

password that you created and click Login.

Proceed to the next chapter for information on using the

UniFi Controller software.

7

Chapter 3: Using the UniFi Controller SoftwareUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Chapter 3: Using the UniFi

Controller Software

The UniFi Controller software that comes with your UniFi

Enterprise WiFi System has a browser-based interface for

easy configuration and management.

To access the interface, perform the following steps:

1. Launch the UniFi Controller application if hasn’t already

been started.

Mac users: Go > Applications > UniFi

Windows users: Start > All Programs > Ubiquiti

UniFi.

2. The UniFi login screen will appear. Enter the admin

name and password in the appropriate fields and click

Login.

Interface Tabs

The UniFi software consists of six primary tabs. This User

Guide covers each tab with a chapter. For details, on a

specific tab, refer to the appropriate chapter.

 “Map Tab” on page 13

 “Statistics Tab” on page 20

 “Access Points Tab” on page 22

 “Users Tab” on page 23

 “Guests Tab” on page 24

 “Offline Clients Tab” on page 25

Common Interface Options

The common interface options are accessible from all tabs

in the UniFi interface.

Access Points

 connected Drop-down clickable list of all of the Access

Points that are online.

 disconnected Displays a list of Access Points that were

previously online but are no longer accessible.



pending Drop-down clickable list of all of the Access

Points that are not yet managed but are available for

management.

Stations

 users Displays the total number of users connected to

the primary network.

 guests Displays the total number of users connected to

the guest network.

Recent Events

Displays a list of recent events including the date and time

the event occurred and the details of the event. The User

and Access Point names are clickable links.

Event Slider Move the slider right and left to navigate

between pages of events.

Search Allows you to enter text you want to search for.

Simply begin typing, there is no need to press Enter.

Clicking on an Event Device Link

The event messages have clickable links [in brackets

underlined in gray text] for AP (See “Access Point Details”

on page 26), User and Guest (See “User/Guest Details”

on page 34). Details vary based on the selection.

8

Chapter 3: Using the UniFi Controller SoftwareUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Alerts

Important events are displayed in the alerts window. The

date and time of the event and the message are displayed.

Search Allows you to enter text you want to search for.

Simply begin typing, there is no need to press enter.

Show Archived Show all of the alert messages that have

been archived.

Archive All Archive all of the alert messages displayed on

the screen.

Adopt Click to adopt an Access Point that is waiting for

adoption.

Archive Archive the selected alert message.

Settings

System System related settings.

Guest Control Guest portal and policies.

Wireless Networks Wireless networks.

Blocked Devices List of blocked wireless

devices.

>_

Admin Settings Admin username, password

and preferences.

User Groups User Group settings.

Settings > System

System Configuration

System Name Editable field with the system name.

Country Select your country from the drop-down list.

Services

Automatic Upgrade When enabled, this option will

automatically upgrade your firmware when an update is

available.

LED When enabled, this option will illuminate the LED on

the Access Point. When disabled, this option will turn off

the LED on the Access Point.

Background Scanning When enabled, all managed

Access Points will scan in the background for “Rogue

Access Points”- third party Access Points or UniFi Access

Points that are being managed by another instance of

the UniFi Controller software. This option is disabled by

default.

 Scan Now When clicked, all managed Access Points

will scan for a 2-3 second period across all maps for

Access Points. New Access Points in their default state

will appear under Access Points > Pending. Additionally,

Background Scanning will automatically detect Access

Points that have been disconnected and attempt to

reconnect them.

Load Balancing Sets a desired number of clients per AP.

While an AP will allow more clients to connect, it will start

to look at those with lower signals and disconnect them.

Network Discovery When enabled, this option allows

UniFi to be discoverable via UPnP. This option is disabled

by default.

Connectivity Monitor When enabled, all managed

Access Points will use the Gateway of the Access Point

that is providing IP information either by DHCP or Static

designation. By selecting Custom, an alternate Uplink IP

address can be specified. Gateway is selected by default.

Remote Logging Enable to define a remote syslog server.

Enter the IP address and port of the syslog server.

Be sure to click Apply to save any changes that you have

made.

9

Chapter 3: Using the UniFi Controller SoftwareUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Mail Server

When enabled, UniFi will send email alerts when triggered

(Pending Access Points and Discconnected Access Points)

to the administrator email address specified under

SettingsAdmin Settings > Admin Preferences > Email Alert.

SMTP Server Enable by selecting the check box

and entering the outgoing (SMTP) mail server name.

Optionally, you may enable Secure Sockets Layer (SSL) to

provide communication security over the Internet. The

port number will automatically change to 465.

Enable authentication Enable by selecting the check box

and entering the username and password required by the

mail server.

Test SMTP Server Enter an email address and click Send

to test the mail server setup.

Apply Click Apply to save changes.

Settings > Guest Control

Guest Policies

Guest Portal This option is disabled by default. When

disabled, guests can access the Internet without entering

a password or accepting Terms of Use. When this option is

enabled, you can control the Guest Portal.

Authentication When the Guest Portal is enabled, the

authentication options will appear. There are four different

authentication methods available:

 No authentication When this option is selected, guests

are not required to log in, but must accept the Terms

of Use. When selecting No authentication, Guest Policy

must be selected under Settings > Wireless Networks >

SSID > Edit > Wireless Configurations in order to enforce

selection of the Terms of Use by the guest.

 Simple Password When this option is selected, guests

are required to enter the simple password and accept

the Terms of Use. When selecting Simple Password,

Guest Policy must be selected under Settings > Wireless

Networks > SSID > Edit > Wireless Configurations in order

to enforce entry of the password and selection of the

Terms of Use by the guest.

 Hotspot When selected, enables Hotspot functionality

including the ability to customize portal login pages

and bill customers using major credit cards or via

PayPal™. When selecting Hotspot, HotspotVoucher

and/or Hotspot > Payment must be selected as a method

of Hotspot authorization. Also, Guest Policy must be

selected under Settings > Wireless Networks > SSID > Edit

> Wireless Configurations in order to enforce entry of

voucher, payment and Terms of Use by the guest.

 External Portal Server If using an external server to

host a custom guest portal, enter the IP address in the

Custom Portal > IP Address box using the following

format: 192.168.0.0.

 Guest Password (Option only visible when using

Simple Password authentication) Enter a password that

guests must enter before accepting the Terms of Use

and connecting to the Internet.

10

Chapter 3: Using the UniFi Controller SoftwareUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

 Expiration (Option only visible when using No

authentication or Simple Password authentication)

Allows the specification of guest login expiration after a

desginated period of time. Options include: 8 hours, 24

hours, 2 days, 3 days, 4 days, 7 days and User-defined. User

defined can be designated in minutes, hours and days.

 Custom Portal (Option only visible when using External

Portal Server authentication) Enter the IP address using

the following format: 192.168.0.0.

 Landing Page The landing page is the page where

guests are redirected after accepting the terms of use.

There are two options available:

- Redirect to the original URL When this option

is selected, guests are directed to the URL they

requested after accepting the Terms of Use.

- Promotional URL When this option is selected,

guests are redirected to the URL that you specify here

after accepting the Terms of Use. Be sure to specify

the URL with http:// in front of the web address.

Example: http://www.ubnt.com

 Portal Customization When enabled, allows

customized portal pages to appear in place of default

login pages. See “Portal Customization” on page 38

for details on setting up custom portal pages.

 Portal URL Hostname Allows the designation of a

hostname for the portal URL in place of the default

IP address. Paired with a SSL certificate, ensures site

certificates are displayed as trusted in the guest browser.

Example: www.ubnt.com

Hotspot

The Hotspot options are only visible when Hotspot

authentication is selected.

 Voucher When selected, vouchers (including

distributable code, duration values, and use restrictions)

can be created using Hotspot Manager (see “HotSpot

Manager” on page 36).

 Payment When enabled, allows payment-based

authentication to be set up with your PayPal Website

Payments Pro account. Payment and Transctions can

be managed using Hotspot Manager (see “HotSpot

Manager” on page 36).

 PayPal PayPal account details are entered here:

- Username Enter the corresponding Username.

- Password Enter the corresponding Password

- Signature Enter the corresponding Signature for the

PayPal account to be used for receiving payments.

- Use Paypal Sandbox For PayPal testing purposes,

enable this option and click Apply Sandbox Account

to set up/access your PayPal Sandbox Test

Environment.

 Hotspot Operator Click Go to Hotspot Manager

to manage Wireless Guests, Payments/Transactions,

Vouchers, and Operator Accounts. See “HotSpot

Manager” on page 36.

 Apply Click Apply to save changes.

When logging in with No authentication, guests will be

required to accept the Terms of Use before gaining access

to the Internet.

When logging in with Simple Password authentication,

guests will be required to enter the Guest Password and

accept the Terms of Use before gaining access to the

Internet.

When logging in with Voucher-based Hotspot

authentication, guests will be required to enter the

voucher number and accept the Terms of Use before

gaining access to the Internet.

When logging in with Payment-based Hotspot

authentication, guests will be required to select package

type, payment choice and accept the Terms of Use before

gaining access to the Internet.

11

Chapter 3: Using the UniFi Controller SoftwareUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Access Control

Restricted Subnets Enter in any subnets that you don’t

want guests to be able to access.

Apply Click Apply to save changes.

Settings > Admin Settings

Admin Name Displays the current admin name used

to login. To change the admin name, simply enter a new

name and click Apply.

Password A new password can be entered in this field. Be

sure to enter the password again in the Confirm field and

then click Apply to save your new password.

Confirm Used to confirm your new password.

Language Selects the language for use in the interface.

Email Alert Select to enable email alerts and enter the

administrator email address in the Send alert to email

box. See “Mail Server” on page 9 for information on

setting up the outgoing (SMTP) mail server.

Apply Click Apply to save changes.

Settings > Wireless Networks

Wireless Configurations

Name Displays the wireless network name (SSID).

Security Displays the type of security being used on your

wireless network.

Guest Network Indicates whether the network is a guest

network.

Actions Select an action button to perform the desired

action:

Edit Select to make changes to the wireless network

settings.

Delete Select to delete the wireless network.

Wireless Configuration

 Name/SSID Allows you to edit the wireless network

name (SSID).

 Security Selects the type of security to use on your

wireless network.

- Open This option is typically only used on the Guest

network. When enabled, wireless network access is

open to anyone without needing a password.

- WEP WEP (Wired Equivalent Privacy) is the oldest and

least secure security algorithm. WPA security methods

should be used when possible.

 WEP Key Enter a WEP encryption key in

hexadecimal format. You can enter a 64-bit or 128-

bit key:

Type HEX

64-bit 10 Hexadecimal Characters (0-9, A-F or a-f)

Example: 00112233AA

128-bit 26 Hexadecimal Characters (0-9, A-F or a-f)

Example: 00112233445566778899AABBCC

 Key Index Specifies the Index of the WEP Key used.

4 different WEP keys can be configured at the same

time, but only one is used. The effective key is set by

choosing 1, 2, 3 or 4.

- WPA-Personal WPA™ or Wi-Fi Protected Access was

developed as a stronger encryption method over WEP.

WPA-Personal requires a passphrase to connect to the

wireless network.

 Security Key Enter the passphrase that users will

use to connect to the wireless network.

- WPA-Enterprise WPA Enterprise uses a RADIUS

server to authenticate users on the wireless network.

 IP Address This is where the IP address of the

RADIUS server is specified.

 Port The port number is entered here. By default it

is 1812.

 Password The password used to authenticate on

the RADIUS server is entered here.

 Guest Policy Select this option to enable guest access

policies on this wireless network.

12

Chapter 3: Using the UniFi Controller SoftwareUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Advanced

 VLAN To use a VLAN, select Use VLAN ID and enter the

port number.



Hide SSID Select this option if you don’t want the SSID

to be broadcast.

 WPA Defines supported WPA and encryption methods.

 User Group Allows assignment of wireless users to a

specific user group.

Be sure to click Apply to save any changes that you have

made. Click Cancel to discard changes.

Settings > Blocked Devices

Displays the list of blocked wireless devices.

Unblock Click to unblock a wireless device. See “User/

Guest Details” on page 34 for information on blocking

wireless devices.

Settings > User Groups

Create Click to create a new user group.

 Name Enter a descriptive user group name.

 Bandwidth Limit (Download) When selected, allows

the designation of a download bandwidth limit in Kbps.

 Bandwidth Limit (Upload) When selected, allows the

designation of a upload bandwidth limit in Kbps.

- Create Click to create user group.

- Cancel Click to cancel user group creation.

Edit Click to change the name or bandwidth settings of

the user group.

Delete Click to delete the user group.

See “Configuration” on page 35 for information on the

application of User Groups to Users/Guests.

Admin

The Admin tab displays server version information,

allows system backups to be created and downloaded,

allows system restoration from backup files and allows

configuration information to be downloaded to assist in

support issues.

Server Information

Version The software version is displayed here. If there

is an update, UniFi will automatically download it and

display it here.

Backup

Download Backup Settings Click to download a file that

contains all of your settings so you can restore them later

if you choose.

Restore

Choose File Select this option to restore settings from a

backup file that you’ve already downloaded.

Support Info

Download Support Info Select this option to download

a file to your computer with information about your

configuration that can be emailed to our support team.

13

Chapter 4: Map TabUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Chapter 4: Map Tab

The UniFi Controller software allows you to upload custom

map images of your location(s) or use Google Maps™ for a

visual representation of your wireless network. When you

initially launch the UniFi Controller application, a default

map is displayed.

Adding Custom Maps

To add a custom map, you must first create the image

using an illustration, image editing, or blueprint

application that exports .jpg, .gif, or .png file formats.

Once you’ve created the map, you can upload it to the

UniFi Controller software by performing the following

steps:

1. Click Configure Maps.

Configure Maps button

2. Click Add a Map.

Add a Map

14

Chapter 4: Map TabUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

3. Enter a map name in the Description field and click

Upload my own. Click the Browse button to locate the

file to use as a map (valid file formats are .jpg, .gif, and

.png). Click Continue.

4. Click Close.

Adding a Google Map™

To add a Google Map™ into the UniFi Controller software

Map view:

1. Click Configure Maps.

Configure Maps button

2. Click Add a Map.

Add a Map

3. Enter a map name in the Description field and click Use

Google Maps. Click Continue.

4. In order to use a Google Map™, you must register

with Google for a Google Maps API key. To do so, click

Specify API Key.

15

Chapter 4: Map TabUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

5. Click or copy and paste the web link from the window

into a new web browser window. Do not close the

UniFi window.

http://code.google.com/apis/maps/signup.html

6. You need to be signed in with a Google account to

obtain a Google Maps API key.

7. Review the terms and conditions and click the

checkbox next to I have read and agree with the

terms and conditions.

8. Navigate back to the UniFi window and copy the

address that UniFi displays in the address bar.

Note: You only need to copy until the end

of the address, do not include the port

information. In the example below, the full

address is https://192.168.25.191:8443/

manage#. You only need to copy up to

https://192.168.25.191. Do not include the

colon or anything beyond it.

9. Navigate back to the Google Maps API Family window

and paste the address into the My web site URL: box.

10. Click the Generate API Key button.

11. A new window will open displaying your key. Highlight

and copy the Google Maps API key.

Google Maps API Key

12. Navigate back to the UniFi window and paste the API

Key into the API Key field. Click continue.

13. The default Google Map location will appear. Click the

Set Location button in the lower left.

Set Location button

16

Chapter 4: Map TabUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

14. Select Specify Address to enter an address. Type in the

address and then click Go. You also have the Specify

Coordinates option to enter the latitude and longitude

of a specific location.

15. The specified location should appear. Click Save.

16. Click Close.

17. You can adjust the zoom using the slider on the right.

Placing Access Points on the Map

1. Drag the Access Point icon(s) from the Unplaced APs

list on the left to the appropriate location(s) on the map.

The access point will appear in the area that you placed it.

17

Chapter 4: Map TabUniFi AP/AP-LR User Guide

Ubiquiti Networks, Inc.

Wired/Wireless Access Point Shows the

location of the Access Point on the map.

Click and hold this icon to drag the Access Point

to another location on the map. Click on the

Access Point icon to reveal additional options.

Click a blank area of the map to hide them.

Lock Locks the selected Access Point in the

current location on the map.

Details Brings up the Details window. This

allows you to view Access Point settings and

connected users. You can also edit the radio

channel, transmit power, uplink and device alias.

There are 4 tabs to select from in the Details

window. Details, Users, Guests, and Configuration.

 Details Displays details on the Access Point

including the MAC address, model, version,

IP address, uptime, connected users, and

connected guests. Click Uplink (Wire) to

display the speed, duplex, Down Pkts / Bytes,

Up Pkts / Bytes and Activity. Click Radio to

display the channel used, transmit power, and

packet information.

 Users Displays the hostname of the users that

are connected to the selected Access Point

and the IP address assigned to them.

You can click on the hostname to display

additional details of each user. A window

with Details, Statistics, and Configuration is

displayed. The Details tab displays the MAC

address, hostname, IP address, uptime and

the Access Point they are connected to. The

Statistics tab displays the channel used, signal

strength, transmit and receive rates, power

saving enabled or disabled, and the number

of packets sent and received. You can also

click History to see a sortable list of events.

The Configuration tab allows you to change

the alias name for the device.



Guests Displays the MAC address of guests

that are connected to the guest network.

 Configuration Allows you to change the alias

name of the device, the channel setting, and

set the transmit power to Auto, High, Medium,

Low or Custom. You can also remove the

Access Point if you no longer want to manage

it with the UniFi Controller software.

Remove Remove the Access Point from the

location on the map.

Show: You can click each of the following options to

display Access Point labels, details, wireless coverage and

topology on the map.

 Labels Displays the name applied to the Access Point.

Refer to Alias under “Configuration” on page 28 to

change a name applied to an Access Point. If no custom

label is applied, the Access Point’s MAC address will be

displayed.

 Details Displays the Access Point name, MAC address,

transmit/receive channel, number of users connected,

and number of guests connected.

La pagina sta caricando ...

Ubiquiti UniFi UAP Manuale utente

Questo manuale è adatto anche per

Ubiquiti UniFi UAP Manuale utente

in altre lingue

Documenti correlati

Altri documenti