Alpine CDM-9825RB Manuale del proprietario
- Categoria
- Ricevitori multimediali per auto
- Tipo
- Manuale del proprietario
EN
DE
FR
ES
IT
SE
R
CDM-9825RB
CDM-9823RR
CDM-9823R
CDE-9822RB
CDE-9821RM
CDE-9821R
Designed by ALPINE Japan
Printed in China (Y)
68P02294K90-A
•OWNER'S MANUAL
Please read before using this equipment.
•BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.
•MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
•MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
•ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare l'attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa igenom denna användarhandledning.
FM/MW/LW/RDS CD Receiver
Meiyi Printing Factory, Dalian, China
No. 28 Chang Qing Street, Xi Gang District, Dalian, China
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
7300 Warden Ave., Suite 203, Markham,
Ontario L3R 9Z6, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Phone 03-9769-0000
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
https://manual-hub.com/
1-EN
Contents
Operating Instructions
WARNING
WARNING .................................................. 2
CAUTION ................................................... 2
PRECAUTIONS ......................................... 2
Basic Operations
Detaching the Front Panel.................................. 4
Attaching the Front Panel .................................. 4
Initial System Start-Up ...................................... 4
Turning Power On and Off ................................ 5
Adjusting Volume/Balance (Between Left and
Right)/Fader (Between Front and Rear) ......... 5
Turning Loudness On/Off ..................................5
Audio Mute Function ......................................... 5
Setting the Bass Control .................................... 6
Setting the Treble Control .................................. 6
Setting the Bass Type ......................................... 7
Changing Audio Level Display Pattern
(CDM-9825RB only) ..................................... 7
Changing Audio Level Display Pattern
(CDM-9823RR/CDM-9823R/CDE-9822RB/
CDE-9821RM/CDE-9821R only) .................. 7
Radio Operations
Manual Tuning ................................................... 8
Automatic Seek Tuning ..................................... 8
Manual Storing of Station Presets ..................... 9
Automatic Memory of Station Presets ............... 9
Tuning to Preset Stations ................................... 9
RDS Operations
Setting RDS Reception Mode and Receiving
RDS Stations ................................................ 10
Recalling Preset RDS Stations ......................... 10
Receiving RDS Regional (Local) Stations ...... 11
Receiving Traffic Information..........................11
PTY (Programme Type) Tuning ......................11
Receiving Traffic Information While Playing
CD or Radio.................................................. 12
Priority News ................................................... 12
CD Player Operations
Inserting/Ejecting Disc .................................... 13
Normal Play and Pause ....................................14
Music Sensor (Skip)......................................... 14
Fast Forward and Backward ............................ 14
Repeat Play ...................................................... 14
M.I.X. (Random Play) ..................................... 15
Scanning Programmes ..................................... 15
Controlling CD Changer (Optional)
(CDM-9825RB/CDM-9823RR/CDM-9823R
only) .............................................................. 15
SETUP Operations
Subwoofer On and Off ..................................... 16
Adjusting Source Signal Levels ....................... 16
Setting the AUX Mode
(CDM-9825RB/CDM-9823RR/CDM-9823R
only) .............................................................. 16
Switching the Tuner Mode
(CDM-9825RB only) ................................... 17
Information
In Case of Difficulty ........................................ 18
Specifications ................................................... 19
Installation and Connections
Warning ............................................................ 20
Caution ............................................................. 20
Precautions ....................................................... 20
Installation ....................................................... 21
Connection ....................................................... 22
ENGLISH
https://manual-hub.com/
2-EN
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result
in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the
product.
WARNING
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Centre for repairing.
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between
+60°C (+140°F) and –10°C (+14°F) before turning your
unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the
player and wait about an hour for the moisture to
evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
https://manual-hub.com/
FR
ES
DE
SE
IT
3-EN
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled
back into the player by the automatic reloading
mechanism.
Do not attempt to insert a disc into the unit when the unit
power is off.
Inserting Discs
Your player accepts only one disc at a time for playback.
Do not attempt to load more than one disc.
Make sure the label side is facing up when you insert the
disc. Your player will automatically eject any disc that is
inserted incorrectly. If the player continues to eject a
correctly inserted disc, push the Reset switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may
result in skips, but this will not scratch the disc or damage
the player.
New Discs
As a protective measure to prevent the CD from jamming,
the CD player will automatically eject discs with irregular
surfaces or inserted incorrectly. When a new disc is
inserted into the player and ejected after initial loading,
using your finger, feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps
or irregularities, this could inhibit proper loading of the
disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ballpoint pen or other
such instrument, then insert the disc again.
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and
never use any special shape discs.
Use of special shape discs may cause damage to the
mechanism.
Installation Location
Make sure this unit will not be installed in a location
subjected to:
•Direct sun and heat
•High humidity and water
•Excessive dust
•Excessive vibrations
Handling the Detachable Front Panel
•Do not expose to rain or water.
•Do not drop or apply shock.
Correct Handling
Do not drop the disc while handling. Hold the disc by its
edge so that no fingerprints are left on the surface. Do not
affix tape, paper, or gummed labels to the disc. Do not
write on the disc.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could
cause the CD player to skip. For routine cleaning, wipe
the playing surface with a clean, soft cloth from the centre
of the disc to the outer edge. If the surface is heavily
soiled, dampen a clean, soft cloth in a solution of mild
neutral detergent before cleaning the disc.
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the
disc to be out of standard specifications and may create
operational problems. We recommend not using these
accessories on discs played in Alpine CD players.
Centre
Hole
Bumps
Centre
Hole
Transparent Sheet Disc Stabilizer
CORRECT
INCORRECT CORRECT
New
Disc
Outside
(Bumps)
https://manual-hub.com/
4-EN
Detaching the Front Panel
1Press and hold the SOURCE/POWER button for
at least 3 seconds to turn off the power.
2Press the (Release) button at lower left corner
until the front panel pops out.
3Grasp the left side of the front panel and pull it out.
NOTES
•The front panel may become hot in normal usage
(especially the connector terminals), this is not a
malfunction.
•To protect the front panel, place it in the supplied
carrying case.
Attaching the Front Panel
1First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projection on the main unit.
2Push the left side of the front panel until it locks
firmly into the main unit.
NOTE
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no
foreign object between the front panel and the main unit.
•Connectable to Remote Control Interface Box
You can operate this unit from the vehicle's
control unit when an Alpine Remote Control
Interface Box (optional) is connected. For
details, contact your Alpine dealer.
Initial System Start-Up
1Immediately after installing or applying power to
the unit, it should be initialized. To do this, first,
remove the detachable front panel. Behind the
front panel, to the right of the connector, there is
a small hole. Using a pencil or other pointed
object, press the Reset switch mounted behind
this hole to complete the initialization procedure.
Basic Operations
4
MODE / LOUD (Rotary encoder) MODE / LOUD
3MUTE
SOURCE/
POWER
MUTE
SOURCE/
POWER
(CDM-9825RB) (CDM-9823RR/CDM-9823R/CDE-9822RB/CDE-9821RM/
CDE-9821R)
2
1
1
Reset switch
1
https://manual-hub.com/
FR
ES
DE
SE
IT
5-EN
Turning Power On and Off
1Press the SOURCE/POWER button to turn on
the unit.
NOTE
The unit can be turned on by pressing any other button
except the eject c button.
Press and hold the SOURCE/POWER button
again for at least 3 seconds to turn off the unit.
NOTE
The very first time the power is turned on, the volume
will start from level 12, and the LOUD function will be
on in the tuner mode.
Adjusting Volume/Balance
(Between Left and Right)/Fader
(Between Front and Rear)
1Press the MODE/LOUD button repeatedly to
choose the desired mode.
Each press changes the modes as follows:
Volume: 0 ~ 35
Balance: L15 ~ R15
Fader: R15 ~ F15
Subwoofer: 0 ~ +15
NOTES
•If the Rotary encoder (CDM-9825RB only) is not
turned or the 5 or 6 button (CDM-9823RR/CDM-
9823R/CDE-9822RB/CDE-9821RM/CDE-9821R
only) is not pressed in 5 seconds after selecting the
BALANCE and FADER modes, the unit automatically
sets in the VOLUME mode.
•*When the subwoofer is set to ON, the level of the
subwoofer can be adjusted.
2Turn the Rotary encoder (CDM-9825RB only) or
press the 33
33
3 and 44
44
4 buttons (CDM-9823RR/
CDM-9823R/CDE-9822RB/CDE-9821RM/CDE-
9821R only) until the desired sound is obtained
in each mode.
Turning Loudness On/Off
Loudness introduces a special low- and high-
frequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity
to bass and treble sound.
1Press and hold the MODE/LOUD button for at
least 2 seconds to activate or deactivate the
loudness mode. The display shows "LOUD ON"
when the loudness mode is activated.
Audio Mute Function
Activating this function will instantly lower the
volume level by 20 dB.
1Press the MUTE button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the
audio back to its previous level.
→ VOL → SUB-W* → BAL → FAD
Indicators on the CDM-9825RB/CDM-9823R
The underline is lit when the function is activated.
https://manual-hub.com/
6-EN
Basic Operations
BAND
f
g
CENTRE f 3
4
Setting the Bass Control
You can change the Bass Frequency emphasis
to create your own tonal preference.
1Press the CENTER f button to select the Bass
setting mode.
Each press changes the modes as follows.
2-1
∗ Setting the Bass frequency:
Press the g or f button to select the
desired Bass centre frequency.
60Hz ↔ 80Hz ↔ 100Hz ↔ 200Hz
Emphasizes the displayed Bass frequency
ranges.
2-2
∗ Setting the Bass Band Width (Q-Factor):
Press the BAND button to select the desired
Bass Band Width.
Changes the displayed frequency's band width to
narrow or wide.
2-3
Setting the Bass Level:
Turn the Rotary encoder (CDM-9825RB only) or
press the 33
33
3 or 44
44
4 button (CDM-9823RR/CDM-
9823R/CDE-9822RB/CDE-9821RM/CDE-9821R
only) to select the desired Bass Level (-7~+7).
You can emphasize or weaken the bass frequency.
NOTES
•If no buttons are pressed within 15 seconds, the Bass
control setting will be turned off automatically.
•The settings of the Bass Level will be individually
memorized for each source (FM, MW (LW) and CD)
until the setting is changed. Once you set Bass
frequency and Bass Band Width for one of sources
(FM, MW (LW) and CD), this setting becomes
effective for all those sources.
*Selecting any of the "Setting the Bass Types" (TYPE 1
through 3), temporarily replaces the custom settings
you have made above.
Setting the Treble Control
You can change the Treble Frequency emphasis
to create your own tonal preference.
1Press the CENTER f button to select the Treble
setting mode.
Each press changes the modes as follows.
2-1
Setting Treble frequency:
Press g or f button to select the desired
Treble centre frequency.
10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz
Emphasizes the displayed Treble frequency
ranges.
2-2
Setting Treble Level:
Turn the Rotary encoder (CDM-9825RB only) or
press the 33
33
3 or 44
44
4 button (CDM-9823RR/CDM-
9823R/CDE-9822RB/CDE-9821RM/CDE-9821R
only) to select the desired Treble Level (-7~+7).
You can emphasize the treble frequency.
NOTES
•If no buttons are pressed within 15 seconds, the Treble
control setting will be turned off automatically.
•
The settings of the Treble Level will be individually
memorized for each source (FM, MW (LW) and CD) until
the setting is changed. Once you set Treble frequency for
one of sources (FM, MW (LW) and CD), this setting
becomes effective for all those sources.
Rotary encoder BAND
f
g
CENTER f
Bass setting
mode
Treble setting
mode
Normal
mode
→→ →
→ WIDE1 → WIDE2→ WIDE3 → WIDE4
(Narrow)← →(Wide)
.........................
(CDM-9825RB) (CDM-9823RR/CDM-9823R/CDE-9822RB/CDE-9821RM/
CDE-9821R)
Bass setting
mode
Treble setting
mode
Normal
mode
→→→
https://manual-hub.com/
FR
ES
DE
SE
IT
7-EN
Changing Audio Level Display
Pattern (CDM-9823RR/CDM-9823R/
CDE-9822RB/CDE-9821RM/CDE-
9821R only)
1Press and hold the F/SETUP button for at least
3 seconds.
2Press the g or f button to select DISP.
3Press the BAND button to switch the display
pattern.
DISP1:
Lights the Volume indicator.
DISP2:
Lights the mode and value bars to show the
settings in the Bass engine display.
DISP OFF:
Tur ns off the light in Audio Level display.
If you set DISP OFF, the Volume indicator and
Bass engine displays are not lit at all times.
4When the setting is completed, press the
F/SETUP button to return to the normal mode.
→ DISP1 → DISP2 → DISP OFF
→ DISP1 → DISP2 → DISP OFF
Setting the Bass Type
This function allows for 3 different Bass type
settings. Select the one that appeals to you the
most.
1Press and hold the CENTER f button for at least
2 seconds to set the Bass type.
2Select the desired TYPE (1 through 3) by
pressing the g or f button within 15
seconds.
Type 1 will sound best if you have a subwoofer in
your system. Use Type 2 or 3 if you are using
small diameter speakers.
3Press the CENTER f button for at least 2
seconds to return to the normal mode.
NOTE
“Bass Center Frequency” and “Bass Band Width”
previously set are replaced when selecting TYPE 1
through 3. When Bass Type is OFF, your previous
settings are restored.
Changing Audio Level Display
Pattern (CDM-9825RB only)
1Press the DISP button to switch the display
pattern.
DISP1:
Lights the Volume indicator.
DISP2:
Lights the mode and value bars to show the
settings in the Bass engine display.
DISP OFF:
Turns off the light in Audio Level display.
If you set DISP OFF, the Volume indicator and
Bass engine displays are not lit at all times.
https://manual-hub.com/
8-EN
Radio Operations
TUNE/
A. ME
SOURCE/
POWER
fg
BAND
Manual Tuning
1Press the SOURCE/POWER button to select the
radio mode.
2Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
3Press the TUNE/A. ME button repeatedly until
"DX SEEK" and "SEEK" disappear from the
display.
NOTE
The initial mode is DX SEEK.
4Press the g or f button to move downward
or upward one step respectively until the desired
station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in.
Automatic Seek Tuning
1Press the SOURCE/POWER button to select the
radio mode.
2Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
3Press the TUNE/A. ME button to illuminate the
DX and SEEK indicators in the display.
The SEEK indicator illuminates. With the DX
mode activated, both strong and weak stations
will be tuned in the Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
illuminate for a few seconds. Now, only strong
stations will be tuned.
4Press the g or f button to automatically
seek a station downward or upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
→ F1(FM1) → F2(FM2) → MW → LW
→ F1(FM1) → F2(FM2) → MW → LW
F/SETUP Preset buttons
(1 through 6)
https://manual-hub.com/
9-EN
Manual Storing of Station Presets
1Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2Press the F/SETUP button so that the "FUNC"
indicator light goes out. Press and hold the
Preset buttons (1 through 6) that you want to
store the station on for at least 2 seconds.
The selected station is stored. The display shows
the band, preset No. and station frequency
memorized.
3Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
MW and LW).
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Automatic Memory of Station
Presets
1Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
2Press and hold the TUNE/A. ME button for at
least 2 seconds.
The tuner will automatically seek and store 6
strong stations in the selected band in order of
signal strength.
The frequency on the display continues to
change while the automatic memory is in
progress.
When the automatic memory has been
completed, the tuner goes to the station stored
in the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Tuning to Preset Stations
1Press the BAND button repeatedly until the
desired band is displayed.
Each press changes the band:
2Press the F/SETUP button so that the "FUNC"
indicator light goes out. Then press the station
preset button that has your desired radio station
in memory.
The display shows the band, preset number and
frequency of the station selected.
→ F1(FM1) → F2(FM2) → MW → LW
→ F1(FM1) → F2(FM2) → MW → LW
Indicators on the CDM-9825RB/CDM-9823R
The underline is lit when the function is activated.
https://manual-hub.com/
10-EN
Setting RDS Reception Mode and
Receiving RDS Stations
The RDS (Radio Data System) is a radio
information system using the 57 kHz subcarrier
of regular FM broadcasts. The RDS allows you to
receive a variety of information such as traffic
information, station names, and to automatically
re-tune to a stronger transmitter that is
broadcasting the same programme.
1Press the F/SETUP button so that the "FUNC"
indicator lights up.
2Press the 1/AF button to activate the RDS mode.
3Press the g or f button to tune in the
desired RDS station.
NOTE
When the BAND button is pressed and held for more
than 2 seconds while a station name is displayed, the
display shows the station frequency for 5 seconds.
4Press the 1/AF button again to deactivate the
RDS mode.
5Press the F/SETUP button to activate the normal
mode.
The "FUNC" indicator light goes out.
Tips
The RDS digital data includes the following:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
RDS Operations
F/SETUPg f1/AF
Recalling Preset RDS Stations
1Press the F/SETUP button so that the "FUNC"
indicator lights up.
2Press the 1/AF button to activate the RDS mode.
3Press the F/SETUP button to activate the normal
mode.
The "FUNC" indicator light goes out.
4Make sure that the "FUNC" indicator light goes
out, then press the preset button in which your
desired RDS station is preset.
If the preset station's signal is weak, the unit
automatically searches and tunes to a stronger
station in the AF (Alternative Frequencies) list.
5If the preset station and the stations in the AF list
cannot be received:
Press the same preset button again within 5
seconds to have the unit search for a station in
the PI (Programme Identification) list.
If there are still no stations receivable in the
area, the unit displays the frequency of the
preset station and the preset indicator
disappears.
If the signal level of the Regional (Local) station
being tuned becomes too weak to receive,
press the same preset button to tune in a
Regional station in other district.
NOTE
For presetting the RDS stations, refer to the Radio
Operation section. The RDS stations can be preset in
the F1 and F2 bands only.
3/PTY
T.INFO
F/SETUPg f1/AF 3/PTY T.INFO
BAND BAND
(CDM-9825RB) (CDM-9823RR/CDM-9823R/CDE-9822RB/CDE-9821RM/
CDE-9821R)
Preset buttons Preset buttons
https://manual-hub.com/
11-EN
Receiving RDS Regional (Local) Stations
1Press and hold the F/SETUP button for at least 3
seconds to activate the setting mode.
2Press the g or f button to select the REG
mode.
3Press the BAND button to turn on or off the REG
(Regional) mode.
In the REG OFF mode, the unit automatically
keeps receiving the related local RDS station.
4Press the F/SETUP button to deactivate the
setting mode.
Receiving Traffic Information
1Press the T.INFO button repeatedly until the
T.INFO indicator appears in the display.
2Press the g or f button to select your
desired traffic information station. When a traffic
information station is tuned in, the TP indicator
lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being
broadcast, the unit is set in the standby mode.
When a traffic information broadcast begins, the
unit automatically receives it and the display
shows "TRF-INFO" for a few seconds and
returns to the PS display.
When the traffic information broadcast is over, the
unit will automatically set in the standby mode.
NOTES
•If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode
for 1 minute. If the signal remains below a certain
level for over 1 minute, the "T.INFO" indicator blinks.
•If you do not want to listen to the traffic information
being received, lightly press the T.INFO button to
skip that traffic information message. The T. INFO
mode will remain in the ON position to receive the
next traffic information message.
•If the volume level is changed while receiving traffic
information, the changed volume level will be
memorized. When traffic information is received next
time, the volume level will be automatically adjusted
to the level memorized.
PTY (Programme Type) Tuning
1Press the F/SETUP button so that the "FUNC"
indicator lights up.
2Press the 3/PTY button to activate the PTY
mode, while the unit is in Radio (FM receiving)
mode.
The Programme Type of the station being
currently received will be displayed for 5 seconds.
•If there is no receivable PTY broadcast, "NO
PTY" will be displayed for 5 seconds.
•If no RDS station can be received, the display
shows "NO PTY."
NOTE
If no button is pressed within 5 seconds after pressing
the PTY button, the PTY mode will be automatically
cancelled.
3Press the g and f buttons within 5
seconds after activating the PTY mode to
choose the desired programme type while the
PTY (programme type) is being displayed. Each
press scrolls the programme type by one.
4Press the 3/PTY button within 5 seconds after
selecting the programme type to start searching
for a station in the selected programme type.
The chosen programme type indicator blinks during
searching and lights when a station is found.
If no PTY station is found, "NO PTY" will be
displayed for 2 seconds.
5Press the F/SETUP button to activate the normal
mode.
The "FUNC" indicator light goes out.
LIGHT M ← CLASSICS → OTHER M
Indicators on the CDM-9825RB/CDM-9823R
The underline is lit when the function is activated.
https://manual-hub.com/
12-EN
Priority News
This function allows you to preset to give priority
to the News programme. You will never miss the
News programme as the unit automatically gives
priority to the News programme whenever it
begins broadcasting, and interrupts the
programme you are currently listening. This
feature is functional when your unit is set to a
mode other than the LW and MW modes.
1Press the F/SETUP button so that the "FUNC"
indicator lights up while the unit is in Radio (FM
receiving) mode.
2Press the 2/NEWS button to activate the
PRIORITY NEWS mode.
The "NEWS" indicator appears in the display.
•To disable the PRIORITY NEWS function,
press the NEWS button.
NOTE
In the PRIORITY NEWS function, unlike in the T.INFO
function, the volume does not increase automatically.
3Press the F/SETUP button to activate the normal
mode, while the unit is in Radio (FM receiving)
mode.
The "FUNC" indicator light goes out.
Receiving Traffic Information While
Playing CD or Radio
1Press the T.INFO button repeatedly until the
"T.INFO" indicator appears in the display.
2Press the g and f buttons to select a
traffic information station if necessary.
•When a traffic information broadcast starts,
the unit automatically mutes the CD player/
changer or the regular FM broadcast.
•When the traffic information broadcast
finishes, the unit automatically returns to the
original source play before the traffic
information broadcast began.
When traffic information stations cannot be
received:
In the tuner mode:
When the TP signal can no longer be received
for over 1 minute, the "T.INFO" indicator blinks.
In the CD mode:
When the TP signal can no longer be received,
the traffic information station of another
frequency will be selected automatically.
NOTE
The receiver is equipped with the EON (Enhanced
Other Networks) function in order to keep track of
additional alternate frequencies to the AF list. The EON
indicator appears while an RDS EON station is being
received. If the station being received does not
broadcast the traffic information, the receiver
automatically tunes in the related station that
broadcasts the traffic information when it occurs.
3Press the T.INFO button to deactivate the Traffic
Information mode.
The "T.INFO" indicator disappears.
T.INFO
g fF/SETUP 2/NEWS g fF/SETUP 2/NEWS T.INFO
RDS Operations
(CDM-9825RB) (CDM-9823RR/CDM-9823R/CDE-9822RB/CDE-9821RM/
CDE-9821R)
https://manual-hub.com/
13-EN
CD Player Operations
c
Inserting/Ejecting Disc
1Insert a CD half way into the slot with the label
side facing up. The player automatically draws
the disc into the disc compartment.
The Disc indicator appears to show that a disc
is loaded.
NOTE
Three-inch (8cm) CD's can be used.
2Press the c button when you want to eject the
CD.
NOTES
•If the CD is not removed for several seconds after it
has been ejected, the player automatically draws the
CD into the compartment to protect the CD.
•Do not insert or remove a CD when loading or
ejecting a CD, as malfunction may result.
About playable media
Use only compact discs with the label side
showing the CD logo marks below.
If you use unspecified compact discs, correct
performance cannot be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs
(CD-ReWritable) for audio use on this unit.
However, you cannot play CD-Rs/CD-RWs
containing MP3 formatted audio files.
•Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to
extreme temperatures or sunlight (e.g., left in the car
or this unit), CDs recorded under unstable conditions,
CDs not designed for audio use, CDs on which a
recording failed a re-recording was attempted.
On handling Compact Discs (CD/CD-R/
CD-RW)
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels and do not write on the
surface.
• Clean the disc when it is dusty.
• Make sure that there are no bumps around thedisc.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a
long time. Never expose the disc to direct sunlight.
Heat and humidity may damage the CD and you may
not be able to play it again.
To customers using CD-R/CD-RW
•If a CD-R/CD-RW cannot be played back, make
sure close session (finalization) has been
performed.
•Finalize the CD-R/CD-RW if necessary, and
attempt playback again.
Indicators on the CDM-9825RB/CDM-9823R
The underline is lit when the function is activated.
https://manual-hub.com/
14-EN
- / J
SOURCE/
POWER Preset buttons
4
Normal Play and Pause
1Insert a CD. The CD player begins playback from
the first track on the disc.
The display shows the track number. When the
last track is played back the player returns to the
first track.
2If a disc is already loaded in the CD player, press
the SOURCE/POWER button to select the CD
mode.
3Press the -/J button to temporarily stop CD
playback.
To resume playback, press the -/J button
again.
Music Sensor (Skip)
1Momentarily press the g button once during
CD play to return to the beginning of the current
track. If you wish to access a track further back,
repeatedly press until you reach the desired
track.
Press the f button once to advance to the
beginning of the next track. If you wish to access
a track further ahead, press repeatedly until the
desired track is reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1Press and hold the g or f button to quickly
move backward or forward until you reach the
desired section of the track.
Repeat Play
1Press the 4 ( ) button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the 4 ( ) button again to deactivate
the repeat play.
NOTES
•If a CD Changer is connected and the RPT ALL
mode is selected, the unit repeatedly plays back all
tracks on the disc selected (CDM-9825RB/CDM-
9823RR/CDM-9823R only).
•In case a 6-disc CD changer is connected (CDM-
9825RB/CDM-9823RR/CDM-9823R only):
Press the F/SETUP button so that the "FUNC"
indicator lights up, then go to step 1.
Press the F/SETUP button to return to the normal
mode.
The "FUNC" indicator light goes out.
g f
CD Player Operations
5 6
RPT RPT ALL (OFF)
→→→
https://manual-hub.com/
15-EN
M.I.X. (Random Play)
1Press the 5 ( ) button in the play or pause
mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence.
To cancel M.I.X. play, press the 5 ( ) button
again.
NOTE
In case a 6-disc CD changer is connected (CDM-
9825RB/CDM-9823RR/CDM-9823R only):
Press the F/SETUP button so that the "FUNC"
indicator lights up, then go to step 1.
Press the F/SETUP button to return to the normal
mode.
The "FUNC" indicator light goes out.
Scanning Programmes
1Press the 6 ( ) button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the 6 ( ) button to
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected (CDM-
9825RB/CDM-9823RR/CDM-9823R only):
Press the F/SETUP button so that the "FUNC"
indicator lights up, then go to step 1.
Press the F/SETUP button to return to the normal
mode.
The "FUNC" indicator light goes out.
Controlling CD Changer (Optional)
(CDM-9825RB/CDM-9823RR/CDM-
9823R only)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-9825RB/CDM-9823RR/CDM-9823R,
you can control the CD Changer using the CDM-
9825RB/CDM-9823RR/CDM-9823R.
NOTE
The CD controls on the CDM-9825RB/CDM-9823RR/
CDM-9823R for the CD Changer operation are
functional only when the CD Changer is interconnected
with the CDM-9825RB/CDM-9823RR/CDM-9823R.
1Press the SOURCE/POWER button to activate
the CD Changer.
NOTE
To start play or pause play, press the :/J button.
2Make sure that the "FUNC" indicator light goes
out, then press the Preset buttons to select the
desired disc loaded in the CD Changer.
NOTES
•After selecting the desired disc, you can operate in
the same way as for the CD player.
For details, please see the CD Operation section.
•If the "FUNC" indicator is illuminated the Disc
Select buttons become nonfunctional.
Indicators on the CDM-9825RB/CDM-9823R
The underline is lit when the function is activated.
https://manual-hub.com/
16-EN
Setting the AUX Mode
(CDM-9825RB/CDM-9823RR/CDM-
9823R only)
You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1Press and hold the F/SETUP button for at least 3
seconds.
2Press the g or f button to select the AUX
mode.
3Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
4Press the F/SETUP button to return to normal
mode.
5To adjust the volume, etc., first press the
SOURCE/POWER button and select the AUX
mode, then make the necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX ON is selected, a CD Changer cannot be
used.
Subwoofer On and Off
1Press and hold the F/SETUP button for at least 3
seconds.
2Press the g or f button to select the SUB
(Subwoofer) mode.
3Press the BAND button to select Subwoofer ON
or OFF.
4After setting is completed, press the F/SETUP
button to return to normal mode.
NOTES
•Initial mode is "SUB-W ON."
•Set to "SUBW OFF" unless the subwoofer is used.
•When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer
to the Adjusting Volume/Balance/Fader.
Adjusting Source Signal Levels
If the difference in volume level between the CD
player and FM radio is too great, adjust the FM
signal level as follows.
1Press and hold the F/SETUP button for at least 3
seconds.
2Press the g or f button to select the FM
LV (FM LEVEL) mode.
3Press the BAND button to select the FM signal
level HI (High) or LO (Low) to make the signal
levels between the FM band and CD player
closer.
4Press the F/SETUP button to return to normal
mode.
SETUP Operations
BAND
fg F/SETUP
SOURCE/
POWER
https://manual-hub.com/
17-EN
Switching the Tuner Mode
(CDM-9825RB only)
The CDM-9825RB incorporates the MAX TUNE
Pro for the highest quality tuner audio. Moreover,
you can choose between 3 settings to suit your
own personal sound preferences usage.
1Press and hold the F/SETUP button for at least 3
seconds.
2Press the g or f button to select
NORMAL.
3Press the BAND button to switch the TUNER
mode.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
NOTES
•The initial setting at the factory is "NORMAL."
•If you find the sound is very noisy while listening to
the tuner in the HI-FI mode, we recommend you
change to the NORMAL mode.
4When the setting is completed, press the
F/SETUP button to return to the normal mode.
→ HI-FI → NORMAL → STABLE
https://manual-hub.com/
18-EN
Information
In Case of Difficulty
If you encounter a problem, please turn the power
off, then on again. If the unit is still not functioning
normally, please review the items in the following
checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make
sure the rest of your system is properly connected
or consult your authorized Alpine dealer.
Basic
No function or display.
•Vehicle's ignition is off.
-If connected following instructions, the unit will not
operate with the vehicle's ignition off.
•Improper power lead connections.
-Check power lead connections.
•Blown fuse.
-Check the fuse on the battery lead of the unit; replace
with the proper value if necessary.
•Internal micro-computer malfunctioned due to
interference noise etc.
-Press the Reset switch with a ballpoint pen or other
pointed article.
Radio
Unable to receive stations.
•No antenna or open connection in cable.
-Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
•You are in a weak signal area.
-Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the
antenna may not be grounded and connected properly.
-Check your antenna connections; make sure the
antenna is properly grounded at its mounting
location.
•The antenna may not be the proper length.
-Make sure the antenna is fully extended; if
broken, replace the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
-Extend the antenna fully; replace it if it is broken.
•The antenna is poorly grounded.
-Make sure the antenna is grounded properly at its
mounting location.
CD
CD Player/Changer (CDM-9825RB/CDM-9823RR/
CDM-9823R only) not functioning.
•Out of operating temperature range +50˚C (+120˚F) for
CD.
-Allow the vehicle's interior (or trunk) temperature to
cool.
CD playback sound is wavering.
•Moisture condensation in the CD Module.
-Allow enough time for the condensation to evaporate
(about 1 hour).
CD insertion not possible.
•The CD is already in the CD player.
-Eject the CD and remove it.
•The CD is being improperly inserted.
-Make sure the CD is being inserted following
instructions in the CD Player Operation section.
Unable to fast forward or backward the CD.
•The CD has been damaged.
-Eject the CD and discard it; using a damaged CD in
your unit can cause damage to the mechanism.
CD playback sound skips due to vibration.
•Improper mounting of the unit.
-Securely re-mount the unit.
•Disc is very dirty.
-Clean the disc.
•Disc has scratches.
-Change the disc.
•The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc.
Consult your nearest ALPINE dealer.
CD playback sound skips without vibration.
•Dirty or scratched disc.
-Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
•Mechanical error
-Press the c button. After the error indication
disappears, insert the disc again. If the above-
mentioned solution does not solve the problem,
consult your nearest ALPINE dealer.
https://manual-hub.com/
19-EN
HI TEMP
ERROR
Indication for CD
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature
returns to within operation range.
•Mechanism error.
1. Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2. When the error indication remains after ejecting,
press the c button again.
If the error indication still does not turn off after
pressing the c button for a few times, consult your
Alpine dealer.
Note
When the "ERROR" is displayed:
In case that the disc cannot be ejected by pressing the c
button, press the Reset switch (refer to page 4) and press the
c button again.
If not ejecting, consult your Alpine dealer.
•No CD is inserted.
-Insert a CD.
Indication for CD Changer
(CDM-9825RB/CDM-9823RR/CDM-9823R
only)
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature
returns to within operation range.
•Malfunction in the CD Changer.
-Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
•Magazine ejection not possible.
-Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
•No magazine is loaded into the CD Changer.
-Insert a magazine.
•No indicated disc.
-Choose another disc.
NO DISC
HI TEMP
ERROR - 01
NO MAGZN
NO DISC
Specifications
FM TUNER SECTION
Tuning Range 87.5 – 108.0 MHz
Mono Usable Sensitivity 0.7 µV
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
MW TUNER SECTION
Tuning Range 531 – 1,602 kHz
Sensitivity (IEC Standard) 25.1 µV/28 dB
LW TUNER SECTION
Tuning Range 153 – 281 kHz
Sensitivity (IEC Standard) 31.6 µV/30 dB
CD SECTION
Frequency Response 5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
PICKUP
Wave Length 795 nm
Laser power CLASS I
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Maximum Power Output 50 W × 4
(CDM-9825RB/CDM-
9823RR/CDM-9823R)
45 W × 4
(CDE-9822RB/CDE-
9821RM/CDE-9821R)
Output Voltage 2 V/10k ohms
Bass ±14 dB at 60 Hz
Treble ±14 dB at 10 kHz
Weight 1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 50 mm (2")
Depth 160 mm (6-5/16")
NOSEPIECE SIZE
Width 170 mm (6–3/4")
Height 46 mm (1-13/16")
Depth 20 mm (25/32")
Due to continuous product improvement, specifications and
design are subject to change without notice.
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
https://manual-hub.com/
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Alpine CDM-9825RB Manuale del proprietario
- Categoria
- Ricevitori multimediali per auto
- Tipo
- Manuale del proprietario
in altre lingue
- English: Alpine CDM-9825RB Owner's manual
Documenti correlati
-
Alpine CDM-7859R Manuale del proprietario
-
Alpine CDM-7857RB Manuale del proprietario
-
Alpine CVA-1004R Manuale del proprietario
-
Alpine CHA-S624 Manuale del proprietario
-
Alpine TDA-7592R Manuale del proprietario
-
-
Alpine TME-M770 Manuale del proprietario
-
Alpine CDA-9853R Manuale utente
-
Alpine CDE-180RM Manuale utente
-
Alpine CDE-181R Manuale del proprietario
