Brother 1900 Manuale utente

INTRODUCTION

Thank you for purchasing the P-touch 1900/1910!

Your new P-touch will allow you to create labels and stamps for any need. Its versatility

enables you to design custom labels by choosing from a variety of frame designs and from

many character sizes and styles. In addition, the four tape widths (1/4” (6 mm), 3/8” (9 mm),

1/2” (12 mm) and 3/4” (18 mm)) and variety of tape colors allow you to print personalized

labels, useful for color-coded filing.

You no longer have to worry about urgent tasks that require professional printing. In the office,

the factory, the lab and the home, the quality and performance of the P-touch 1900/1910

makes it an extremely practical machine.

Finally, as you may want to occasionally refer to this User’s Guide, we suggest that you keep it

in a handy place.

(The PT-1900 and the PT-1910 models are equipped with the same functions; however, the

PT-1910 includes a carrying case and additional tape.)

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- Changes or modiﬁcations not expressly approved by Brother Industries, Ltd. could void

the user’s authority to operate the equipment.

Patent numbers and patent publication numbers which are related to this product are as

below:

USP4839742 USP4983058 USP5120147

USP4927278 USP5009530

USP4976558 USP5069557

i

Brother

®

90 Days/One Year Limited Warranty and Replacement Service

(For USA Only)

This warranty gives you certain rights and

you may also have other rights that may

vary from state to state.

This warranty is given only to the original

end-use purchaser (referred to in this

warranty as “Original Purchaser”) of the

accompanying product (referred to in this

warranty as “this Product”).

What is covered:

Brother warrants to only the Original

Purchaser for 90 days from the date of

original purchase by the Original

Purchaser (referred to in this warranty as

“90 Day Period”) of the Product that there

are no defects in the materials,

workmanship or Year 2000 compliance of

this Product. Provided the Original

Purchaser informs Brother International

Corporation (“Brother”) of the need for

Product service before the last day of the

90 Day Period, provided the Original

Purchaser provides proof of the date of

original purchase by the Original

Purchaser, and provided this warranty is

not void, Brother or its authorized service

center will repair or (at Brother’s option)

replace this Product free of charge, but

only to the extent such service is required

due only to defective materials,

workmanship or Year 2000 compliance.

After the 90 Day Period, and until one

year from date of original purchase by the

Original Purchaser (referred to in this

warranty as “Secondary Period”) and

provided this warranty is not void, Brother

or its authorized service center will

furnish, free of charge, a replacement part

for the defective part of this Product. The

Original Purchaser shall pay for all labor

charges during the Secondary Period.

The replacement of defective parts

without charge during the Secondary

Period does not include consumable and

accessory items such as tapes, cutters,

stamps, power adapters etc.

What is NOT covered:

This warranty is VOID -- that is, this

Product has no warranty -- if: (1) you did

not purchase this Product from an

authorized Brother reseller within the

United States, (2) this Product has been

serviced, modified or tampered with by

anyone other than an Authorized Service

Representative of Brother, (3) the serial

number has been modified, defaced or

removed from this Product, (4) this

Product has been abused or damaged,

(5) non Brother®-brand or non Brother

approved parts, supplies, or other

accessories have been used with this

Product.

What to do if you think your Product is

defective:

Call our Customer Service Hotline (listed

below) or if you suspect a defect in

materials or workmanship in this Product,

you can report it to a Brother Authorized

Service Center. During either the 90-Day

Period or the Secondary Period

(collectively referred to in this warranty as

the “Warranty Period”), supply Brother’s

representative with a copy of your dated

bill of sale showing that this Product was

purchased within the United States. For

the name of a Brother Authorized Service

Center, call the Brother Automated Fax

Back number or visit the Brother World

Wide Web (listed below). After contacting

the Brother Authorized Service Center,

you may be required to deliver or send the

Product properly packaged, freight

prepaid, to the Authorized Service Center

together with a photocopy of your bill of

sale.

What Brother will do:

Brother (or its Authorized Service Center)

will evaluate your report of a possible

defect to determine whether a defect

exists, and if it does exist, Brother (or its

Authorized Service Center) will repair or

(at Brother’s option) replace the Product

with a product that performs the same

functions and performs as well as the

original Product. Brother reserves the

right to supply refurbished or

remanufactured replacement products

provided that the replacement products

conform to the manufacturer’s

specifications for new Products. The

repaired or replacement product will be

returned to you freight prepaid.

ii

Brother

®

90 Days/One Year Limited Warranty and Replacement Service

(For USA Only)

Replacement Service:

Replacement service will expedite the ex-

change of your non-working Product with a

refurbished or remanufactured product that

conforms to the manufacturer’s specifica-

tions for new Products. The refurbished or

remanufactured Product you receive will be

covered by the balance of the limited warran-

ty period remaining on the original Product,

plus an additional thirty (30) days. You will

keep the replacement Product that is sent to

you and must return (or be billed up to the

cost of a new product) your original non-

working product, which shall become the

property of Brother. You must call Brother

Customer Service and if the representative

cannot correct the Product’s malfunction

over the telephone and you elect the Ex-

change Service, you must provide informa-

tion pertaining to this Product and you must

also provide a valid major credit card num-

ber. Your credit card will be charged up to

the cost of a new Product if: (i) you do not re-

turn your original Product to Brother within

five (5) business days; (ii) the malfunctions

of your original Product are not covered by

the limited warranty; (iii) the proper packag-

ing instructions are not followed and has

caused damage to the product; or (iv) the

warranty period on your original Product has

expired or has not been sufficiently validated

with a copy of the proof of purchase (bill of

sale). The Brother Customer Service Repre-

sentative will ship the exchange Product with

return instructions and prepaid return airbill.

Follow the return instructions. You must re-

turn the original Product in the same ship-

ping carton in which the exchanged Product

was received and include a copy of proof of

purchase (bill of sale). Retain your original

accessory items and a copy of the return air-

bill, signed by the courier.

Limitations:

Repair or replacement as described above is

your sole and exclusive (that is, your only)

remedy if this Product is defective. Brother is

not responsible for damage to or loss of any

equipment, media, programs or data related

to the use of this Product. Except for that

repair or replacement, Brother shall not be

liable for any direct, indirect, incidental or

consequential damages or specific relief.

Because some states do not allow the

exclusion or limitation of consequential or

incidental damages, the above limitation

may not apply toyou.

THIS WARRANTY IS GIVEN IN LIEU OF

ALL OTHER WARRANTIES, WRITTEN OR

ORAL, WHETHER EXPRESSED BY

AFFIRMATION, PROMISE, DESCRIPTION,

DRAWING, MODEL OR SAMPLE. ANY AND

ALL WARRANTIES OTHER THAN THIS

ONE, WHETHER EXPRESS OR IMPLIED,

INCLUDING IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE HEREBY

DISCLAIMED.

This Limited Warranty is the only warranty

that Brother is giving for this Product. It is the

final expression and the exclusive and only

statement of Brother’s obligations to you. It

replaces all other agreements and under-

standings that you may have with Brother or

its representatives.

This Limited Warranty (and Brother’s

obligation to you) may not be changed in any

way unless you and Brother sign the same

piece of paper in which we (1) refer to this

Product and your bill of sale date, (2)

describe the change to this warranty and (3)

agree to make that change.

iii

Important Information

Should you have questions, or need information about your Brother Product, we have a variety

of support options for you to choose from:

USA-Customer Service:

Customer Service

877-478-6824 (voice)

Customer Service

901-379-1210 (fax)

Automated Faxback

800-521-2846

World Wide Web

www.brother.com

Supplies / Accessories

www.brothermall.com

or 888-879-3232

BROTHER INTERNATIONAL CORPORATION

100 SOMERSET CORPORATE BLVD.

BRIDGEWATER, NEW JERSEY 08807-0911

Please record your model and serial number and your date and location of Purchase below for

your records. Keep this information with your proof of purchase (bill of sale) in case your

Product is lost, stolen or requires service.

Model #

Serial #

Date of purchase:

Store where purchased:

Location of store:

Important:

We recommend that you keep all original packing materials, in the event you ship

this product.

iv

CONTENTS

Getting Started

GENERAL DESCRIPTION ...................................................................................1

GENERAL PRECAUTIONS ..................................................................................3

BATTERIES .........................................................................................................3

OPTIONAL AC ADAPTOR ................................................................................. 4

TAPE CASSETTE .................................................................................................5

ATTACHING LABELS .........................................................................................6

PRINT HEAD & ROLLERS ................................................................................... 7

For Your Information

POWER KEY .......................................................................................................8

CURSOR KEYS ...................................................................................................8

CODE, ALT & SHIFT KEYS .................................................................................9

SPACE KEY ....................................................................................................... 12

RETURN KEY .................................................................................................... 12

TAB FUNCTION ..............................................................................................13

DELETE KEY .....................................................................................................15

LINE OUT FUNCTION .....................................................................................16

CLEAR FUNCTION ..........................................................................................17

ACCENT FUNCTION .......................................................................................19

SYMBOL FUNCTION .......................................................................................20

AUTO FORMAT FUNCTION ...........................................................................22

STAMP FUNCTION .......................................................................................... 23

FONT FUNCTION ...........................................................................................26

SIZE & WIDTH FUNCTIONS ............................................................................ 27

STYLE FUNCTION ...........................................................................................29

UNDERLINE FUNCTION .................................................................................31

FRAME FUNCTION .......................................................................................... 32

TAPE MARGIN FUNCTION .............................................................................33

HORIZONTAL ALIGNMENT FUNCTION ........................................................34

MIRROR PRINTING FUNCTION ...................................................................... 35

LENGTH FUNCTION ....................................................................................... 36

AUTO CUT FUNCTION ................................................................................... 38

v

PRINT KEY .......................................................................................................39

FEED & CUT FUNCTION ................................................................................. 40

NUMBERING FUNCTION ...............................................................................40

REPEAT PRINTING FUNCTION .......................................................................42

MEMORY FUNCTIONS .................................................................................... 43

TROUBLESHOOTING ......................................................................................47

ERROR MESSAGE LIST .....................................................................................48

SPECIFICATIONS .............................................................................................51

ACCESSORIES ..................................................................................................52

INDEX ..............................................................................................................54

BROTHER CONTACT INFORMATION ............................................................56

vi

1

TOP VIEW

BOTTOM VIEW

Getting Started

GENERAL DESCRIPTION

Tape compartment

cover

LCD display

Keyboard

AC adaptor

connector

Tape exit slot

Battery compartment cover

2

KEYBOARD & LCD DISPLAY

3

●

To avoid injuries, do not touch the cutter’s edge.

●

Use only Brother TZ tapes with this machine to avoid damage. Do not use tapes that do

not have the mark. Brother cannot be held responsible for trouble or damage by the

use of unauthorized supplies.

●

Do not pull on the tape being fed from the P-touch. This may damage the tape cassette.

●

Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.

●

Do not expose the machine to high temperatures or high humidity. Never leave it on the

dashboard or in the back of your car.

●

Do not leave any rubber or vinyl on the machine for an extended period of time. Doing

so may cause staining.

●

Do not clean the machine with alcohol or other organic solvents. Use a soft, dry cloth only.

●

Do not put any foreign objects into or anything on the machine.

●

Use only the AC adaptor (model AD-60) designed exclusively for this machine. Use of

any other adaptor may void the warranty.

●

Do not try to disassemble the AC adaptor.

●

When the machine is not being used for a long period of time and it is not necessary to

keep the text ﬁles stored in the memory, disconnect the AC adaptor, and remove the bat-

teries to prevent them from leaking and damaging the machine.

●

When the AC adaptor is connected, unplugging the adaptor from the electrical outlet

before unplugging it from the machine can delete all text ﬁles in the memory, even if bat-

teries are installed.

●

Use six AA alkaline batteries in this machine.

●

If the batteries are not installed with their positive and negative poles pointing in the cor-

rect direction, the batteries may leak, overheat or burst, or the print head may overheat.

This portable machine can be used anywhere by installing six (6)

AA alkaline batteries

.

When

you change the batteries, always replace all six at the same time.

To change the batteries:

1

Remove the battery compartment cover on the back of the machine.

2

If batteries are already installed, remove them.

3

Insert six new AA alkaline batteries, making sure that their poles point in the correct direction.

4

Attach the battery compartment cover.

☞

Be sure to insert the new batteries within ﬁve minutes of removing the old ones,

otherwise the text shown in the display and any text ﬁles stored in the memory will

be lost (unless the machine is plugged into an AC outlet with the AC adaptor).

GENERAL PRECAUTIONS

BATTERIES

4

Remove the batteries and disconnect the AC adaptor if you do not intend to use this

machine for an extended period of time. When the power is disconnected, all text

shown in the display and stored in the memory will be lost.

If the batteries are not installed with their positive and negative poles pointing in

the correct direction, the batteries may leak, overheat or burst, or the print head

may overheat.

The AC adaptor (model AD-60) allows you to use this machine wherever there is an electrical outlet.

To connect the optional AC adaptor:

1

Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the right

side of the machine.

2

Insert the plug on the adaptor into the nearest standard electrical outlet.

☞

Only use the AC adaptor designed exclusively for this machine.

Remove the batteries and disconnect the AC adaptor if you do not intend to use this

machine for an extended period of time. When the power is disconnected, all text

shown in the display and stored in the memory will be lost.

When the AC adaptor is connected, unplugging the adaptor from the electrical out-

let before unplugging it from the machine can delete all text ﬁles in the memory,

even if batteries are installed.

OPTIONAL AC ADAPTOR

5

A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are avail-

able for this machine in a wide variety of colors and sizes, it is possible to make distinctive

color-coded and stylized labels.

In addition, this machine has been designed to allow you to change the tape cassettes quickly

and easily.

To change the tape cassette:

1

Lift open the tape compartment cover. The installed cassette is also released.

2

If a tape cassette is already installed, remove it by pulling it straight up.

3

If the ink ribbon in the tape cassette to be installed is loose, use your finger to wind the

toothed wheel in the direction of the arrow on the cassette until there is no slack in the

ribbon. Also, make sure that the end of the tape feeds under the tape guides.

☞

If you are using a new tape cassette provided with a stopper, be sure to remove the

stopper.

4

Insert the tape cassette firmly into the tape compartment, making sure that the entire back

of the cassette touches the bottom of the compartment.

☞

When inserting the tape cassette, make sure that the inner ribbon does not catch on

the corner of the metal guide.

5

Close the compartment cover, and then turn on the machine, if it is off.

6

Hold down

c

and press

_

once to advance the tape and remove any slack.

TAPE CASSETTE

6

LAMINATED TAPE

The enclosed stick enables you to easily remove the backing from labels printed on laminated tapes.

1

Hold the tape in your left hand, with the printed surface facing up, and hold the stick in

your right hand.

2

Pass the tape halfway through the long narrow hole in the stick.

3

Turn the stick three-quarters of a turn towards you and pull the stick away from you as

shown below.

4

Peel off the label backing.

FABRIC TAPE

Fabric tape is used to attach a piece of fabric printed with your text onto garments using an

iron. After printing the text onto fabric tape and cutting off the label using scissors

, place the

label on an ironed garment at the location where you wish to attach it in such a way that the

printed text can be read correctly. Cover the label with another piece of cloth and use an iron

set to a medium-high temperature (320 to 356 ˚F (160 to 180 ˚C)) and press down firmly for 15

to 30 seconds. For more details, refer to the instructions included with the fabric tape cassette.

STAMP TAPE

Refer to pages 23 through 25 for a detailed explanation on using the stamp tape to make stamps.

ATTACHING LABELS

GH

ABCDEF

7

Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers.

This is particularly likely when you are using the unit outdoors or in a very dusty environment.

If a section of the print head is covered with dust, a black horizontal streak may appear

through the label text. Therefore, as with a tape recorder, the machine’s head may need to be

cleaned from time to time.

To clean the print head and rollers:

1

Turn off the machine.

2

Open the tape compartment cover, and then remove the tape cassette if one is installed.

The print head and rollers are located in the tape compartment.

3

Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down

motion.

Rollers: Use a dry cotton swab to wipe each roller with an up-and-down motion while

rotating them with your finger.

4

Install a tape cassette, close the tape compartment cover, and then try printing again.

5

If a black streak still appears in the label, repeat steps

3

and

4

using a cotton swab

dipped in isopropyl (rubbing) alcohol.

If none of the above works, contact your service representative.

☞

The print head can be cleaned more easily if the optional print head cleaning cassette

(TZ-CL4) is used.

PRINT HEAD & ROLLERS

Print head

Rollers

Cotton swab

8

The

Power

key (

o

) is located in the lower-right corner of the keyboard. If batteries have

been installed or the machine has been plugged in using the optional AC adaptor, the previ-

ous session’s information is displayed when the machine is turned on. This feature allows you

to stop work on a label, turn off the machine, and return to it later without having to re-enter

the text.

The machine will automatically turn off if no key is pressed within 5 minutes. The machine’s

internal memory stores the current session’s information and displays it when you turn on the

machine again.

To turn on the machine:

●

Press

o

. The previous session’s information appears in the LCD display.

To turn off the machine:

●

Press

o

. The current session’s information is stored in the internal memory.

The machine’s LCD display shows two rows of 9 characters; however, the text that you create

can be up to 99 characters long. You can review and edit different parts of the text by moving

the cursor backward and forward.

LEFT CURSOR KEY

To move the cursor one character to the left:

●

Press

f

once.

☞

If this key is pressed when the cursor is at the beginning of a line following another

line, the cursor moves to the end of the previous line.

To move the cursor several characters to the left:

●

Hold down

f

until the cursor moves to the desired position.

To move the cursor to the beginning of the current line:

●

Hold down

c

and press

f

.

For Your Information

POWER KEY

CURSOR KEYS

9

RIGHT CURSOR KEY

To move the cursor one character to the right:

●

Press

w

once.

☞

If this key is pressed when the cursor is at the end of a line followed by another

line, the cursor moves to the beginning of the next line.

To move the cursor several characters to the right:

●

Hold down

w

until the cursor moves to the desired position.

To move the cursor to the end of the current line:

● Hold down c and press w.

UP CURSOR KEY

To move the cursor up to the previous line:

● Press h once.

☞ If the cursor is in the ﬁrst line of text, it will move to the beginning of the line.

To move the cursor up several lines:

● Hold down h until the cursor moves to the desired line.

To move the cursor to the beginning of the entire text:

● Hold down c and press h.

DOWN CURSOR KEY

To move the cursor down to the following line:

● Press e once.

☞ If the cursor is in the last line of text, it will move to the end of the line.

To move the cursor down several lines:

● Hold down e until the cursor moves to the desired line.

To move the cursor to the end of the entire text:

● Hold down c and press e.

Most characters can be entered simply by pressing their keys. However, to use special func-

tions or to enter capital letters, accented characters and some symbols, the following special

keys are necessary.

CODE KEY

To use a function printed above a key:

● Hold down c and press the key immediately below the desired function.

CODE, ALT & SHIFT KEYS

10

EXAMPLE

ALT KEY

To type in characters printed in color on the right-hand side of the keys:

● Hold down a and press the key of the desired character written in color. The Alt indi-

cator on the left side of the display comes on while a is held down.

EXAMPLE

To start the Symbol function:

● Hold down c and press a once.

To type in “–”:

● Hold down a and press / once. The Alt indicator comes on while a is held

down.

1:

DANGER_

ÆæÃã

Ü

1:

012_

1:

012–_

Alt

11

SHIFT KEY

To type in an uppercase letter or a symbol printed in the top left-hand corner of a key:

● Hold down s and press the key of the desired letter or symbol.

EXAMPLE

The Caps mode is similar to holding down s. It allows you to type capital letters continu-

ously.

To type in many capital letters:

1 Hold down c and press s. The Caps indicator on the left side of the display

comes on.

2 Press the keys of the desired letters or symbols.

3 To exit Caps mode, hold down c and press s. The Caps indicator goes off.

To type in “%”:

● Hold down s and press 5.

1:

5 _

1:

5%_

1:

_

Caps

12

The Space key ( _ ) lets you add blank spaces between characters in your text. It is differ-

ent from the right cursor key ( w ), which just moves the cursor without adding blank

spaces.

To add a space:

● Press _.

EXAMPLE

As on a typewriter or word processor, this machine’s Return key ( r ) is used to end a line

of text and start another one. When you have finished entering one line, press the return key to

make a new line and move the cursor to it.

☞ The text can only contain a maximum of four lines. If you press r when four text

lines already exist, the error message “4 LINE LIMIT!” will appear.

To add a space:

● Press _.

SPACE KEY

1:

J._

1:

J. _

RETURN KEY

La pagina si sta caricando...

Brother 1900 Manuale utente

Brother 1900 Manuale utente

in altre lingue

Documenti correlati