Brother MFC-9840CDW Guida di installazione rapida

STEP 1

STEP 2

Setup is Complete!

Quick Setup Guide

Setting Up the Machine

Installing the Driver & Software

MFC-9840CDW

Before you can use the machine, you must set up the hardware and install the driver. Please read

this ‘Quick Setup Guide’ for proper set up and installation instructions.

Keep this ‘Quick Setup Guide’ and the supplied CD-ROM in a convenient place for quick and easy

reference at all times.

Version B

USA/CAN

1

Symbols used in this guide

Warning

Caution

Improper Setup

Warnings tell you what to do to prevent

possible personal injury.

Cautions specify procedures you must

follow or avoid to prevent possible

damage to the machine or other objects.

Improper Setup icons alert you to

devices and operations that are not

compatible with the machine.

Note

User's Guide, Software User's Guide or

Network User's Guide

Notes tell you how you should respond

to a situation that may arise or give tips

about how the current operation works

with other features.

Indicates reference to the User's Guide,

Software User's Guide or Network

User's Guide which is on the CD-ROM

we have supplied.

Table of Contents

1

Getting Started

Carton components...................................................................................................................................... 2

Control panel................................................................................................................................................ 3

STEP 1 –

Setting Up the Machine

Remove the packing materials from the machine ........................................................................................ 4

Installing the toner cartridges ....................................................................................................................... 5

Load paper in the paper tray ........................................................................................................................ 5

Release the Scanner Lock ........................................................................................................................... 6

Install the power cord and phone line .......................................................................................................... 6

Setting the date and time ............................................................................................................................. 7

Setting your station ID.................................................................................................................................. 8

Choosing the correct Receive Mode ............................................................................................................ 9

Tone and pulse dialing mode (Canada only) ............................................................................................. 10

Dial Prefix................................................................................................................................................... 10

Selecting your language (Canada only) ..................................................................................................... 11

Setting the LCD contrast............................................................................................................................ 11

Sending in the product registration and test sheet (USA only) .................................................................. 11

STEP 2 –

Installing the Driver & Software

Windows

®

For USB Interface Cable Users................................................................................................................. 14

For Wired Network Interface Users........................................................................................................... 17

Firewall settings ................................................................................................................................... 20

For Wireless Network Interface Users in infrastructure mode................................................................... 22

Using the SecureEasySetup™ software to configure your machine for a wireless network................ 24

Using the Setup Wizard from the control panel LAN menu for wireless network configuration ........... 25

For Windows Server

®

2003, see the Network User's Guide on the CD-ROM.

Firewall settings ................................................................................................................................... 30

Macintosh

®

For USB Interface Cable Users................................................................................................................. 32

For Wired Network Interface Users........................................................................................................... 34

For Wireless Network Interface Users in infrastructure mode................................................................... 37

Using the SecureEasySetup™ software to configure your machine for a wireless network................ 39

Using the Setup Wizard from the control panel LAN menu for wireless network configuration ........... 40

For Network Users

BRAdmin Light utility (For Windows

®

users).............................................................................................. 45

Installing the BRAdmin Light configuration utility .................................................................................. 45

Setting your IP address, Subnet Mask and Gateway using BRAdmin Light ........................................ 45

BRAdmin Light utility (For Mac OS

®

X users)............................................................................................ 46

Setting your IP address, Subnet Mask and Gateway using BRAdmin Light ........................................ 46

Web Based Management (web browser)................................................................................................... 47

Restoring the network settings to factory default ....................................................................................... 47

Entering text............................................................................................................................................... 48

Consumables and Options

Options....................................................................................................................................................... 49

Consumables ............................................................................................................................................. 49

Getting Started

2

1

Carton components

Carton components may vary from one country to another.

Save all packing materials and the printer carton in case for any reason you must ship your printer.

1 Automatic Document Feeder (ADF)

2 Control Panel

3 Front Cover Release Button

4 USB Direct Interface

5Front Cover

6 Paper Tray

7 Power Switch

8 ADF Document Output Support Flap

9 Document Cover

10 Face-down Output Tray Support

11 Multi-purpose tray (MP tray)

The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface

you intend to use (USB or Network). Do NOT connect the interface cable at this time. Connecting the interface

cable is done during the software installation process.

 USB interface cable

Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters). When you use a

USB cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard

or non-powered USB hub.

 Network cable

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet

Network.

1

2

5

8

4

9

3

7

10

6

11

CD-ROMs

For Windows

®

For Macintosh

®

Quick Setup Guide

User’s Guide

Belt Unit (pre-installed)

AC Power Cord

Telephone line Cord

Insertion Sheet and Plastic

bag for repacking

Accessory Order Form and

Test Sheet (USA only)

Toner cartridges (Black, Cyan, Magenta and Yellow)

Drum Unit (pre-installed)

Waste Toner Box (pre-

installed)

Getting Started

3

2

Control panel

MFC-9840CDW

1 One Touch keys

2 LCD (Liquid Crystal Display)

3 Status LED

4 Menu keys

5 Dial Pad

6 Stop/Exit key

7Start keys

8 Copy keys

9 Duplex key

10 Mode keys

11 Fax and Telephone keys

12 Print keys

For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide.

Note

This machine is heavy and weighs 83.6 lb (38 kg). To prevent injuries use at least two people to lift the machine.

Be careful not to pinch your fingers when you set the machine back down.

05/01/2008 18:00

Fax Only

Sleep

1 2 3

4

5

6

78910

11

12

Setting Up the Machine

4

STEP 1

1

1 Remove the packing

materials from the machine

Important

Save all packing materials and the carton in

case you have to ship your machine.

Improper Setup

DO NOT plug in the AC power cord yet.

1 Remove the packing tape from the outside of

the machine.

2 Press the front cover release button and open

the front cover.

3 Remove the four pieces of orange packing

material as shown in the illustration below.

4 Hold the green handle of the drum unit. Lift the

drum unit up and then pull it out until it stops.

5 Remove the orange packing material as shown

in the illustration below.

Setting Up the Machine

5

2 Installing the toner

cartridges

1 Unpack the toner cartridges and rock each

toner cartridge from side to side 5 to 6 times.

2 Pull off the protective cover.

3 Hold the handle of the toner cartridge and slide

it into the drum unit. Make sure that you match

the toner cartridge color to the same color label

on the drum unit, and make sure that you fold

down the toner cartridge handle (1) once the

toner cartridge is in place.

1 C — Cyan

2 M — Magenta

3 Y — Yellow

4 K — Black

4 Repeat steps 1 through 3 for the remaining

toner cartridges.

5 Put the drum unit back into the machine.

6 Close the front cover of the machine.

3 Load paper in the paper tray

1 Pull the paper tray completely out of the

machine.

1

2

3

4

(1)

Setting Up the Machine

6

STEP 1

2 While pressing the green paper-guide release

lever (1), slide the paper guides to fit the paper

size. Make sure that the guides are firmly in the

slots.

3 Fan the stack of paper well to avoid paper jams

and misfeeds.

4 Put paper in the paper tray. Make sure that the

paper is flat in the tray and below the maximum

paper mark.

5 Put the paper tray firmly back into the machine.

4 Release the Scanner Lock

1 Push the lever (1) in the direction to unlock the

scanner.

(The gray scanner lock lever is located at the

back left side, under the docment cover (2) )

5 Install the power cord and

phone line

1 Make sure that the machine power switch is off.

Remove the label covering the AC power inlet.

2 Connect the AC power cord to the machine.

3 Plug the AC power cord into an AC outlet. Turn

the power switch on.

(1)

(2)

Setting Up the Machine

7

4 Connect one end of the telephone line cord to

the jack on the machine marked LINE and the

other end to a modular wall jack.

Note

Make sure the telephone line cord is connected to

the jack labeled LINE and not the EXT. jack.

Warning

• The machine must be grounded using a 3-prong

plug.

• Since the machine is grounded through the power

outlet, you can protect yourself from potentially

hazardous electrical conditions on the telephone

network by keeping the power cord connected to

your machine when you connect it to a telephone

line. Similarly, you can protect yourself when you

want to move your machine by disconnecting the

telephone line first and then the power cord.

Note

If you are sharing one phone line with an external

telephone, connect it as shown below.

Note

If you are sharing one phone line with an external

telephone answering device, connect it as shown

below.

Please set the receive mode to

External TAD.

For more details, see step 8 Choosing the

correct Receive Mode on page 9 and

Connecting an external TAD in Chapter 7 of

the User’s Guide.

6 Setting the date and time

The machine displays the date and time.

1 Press Menu.

2 Press 0.

3 Press 2.

4 Enter the last two digits of the year on the dial

pad, and then press OK.

02.Date&Time

Year:2008

Enter & OK Key

(e.g. Enter 0, 8 for 2008.)

5 Enter the two digits for the month on the dial

pad, and then press OK.

02.Date&Time

XX/XX/2008

Month:03

Enter & OK Key

(e.g. Enter 0, 3 for March.)

Setting Up the Machine

8

STEP 1

6 Enter the two digits for the day on the dial pad,

and then press OK.

02.Date&Time

03/XX/2008

Day:25

Enter & OK Key

(e.g. Enter 2, 5.)

7 Enter the time in 24-hour format on the dial

pad, and then press OK.

02.Date&Time

03/25/2008

Time:15:25

Enter & OK Key

(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)

8 Press Stop/Exit.

Note

If you make a mistake, press Stop/Exit to start

from step 1.

7 Setting your station ID

You should store your name and fax number to be

printed on all fax pages that you send.

1 Press Menu.

2 Press 0.

3 Press 3.

4 Enter your fax number (up to 20 digits) on the

dial pad, and then press OK.

03.Station ID

Fax:_

Enter & OK Key

5 Enter your telephone number (up to 20 digits)

on the dial pad, and then press OK.(If your

telephone number and fax number are the

same, enter the same number again.)

03.Station ID

Fax:908XXXXXXXX

Tel:_

Enter & OK Key

6 Use the dial pad to enter your name (up to 20

characters), and then press OK.

03.Station ID

Fax:908XXXXXXXX

Tel:908XXXXXXXX

Name:

Enter & OK Key

Note

• Refer to the following chart for entering your name.

• If you need to enter a character that is on the same

key as the previous character, press to move

the cursor to the right.

• If you entered a letter incorrectly and want to

change it, press to move the cursor to the

incorrect character, press Clear/Back.

For more details, see Entering text

on page 48.

7 Press Stop/Exit.

Note

(USA only)The Telephone Consumer Protection

Act of 1991 makes it unlawful for any person to

use a computer or electronic device to send any

message via a telephone fax machine unless such

messages clearly contain, in a margin at the top or

bottom of each transmitted page, or on the first

page of the transmission, the date and time it is

sent and an identification of the business or other

entity or other individual sending the message and

the telephone number of the sending machines or

such business, other entity or individual.To

program this information into your machine, see

Setting the date and time on page 7 and Setting

your station ID on page 8.

Press

key

One

time

Two

times

Three

times

Four

times

Five

times

2 ABC2A

3 DEF 3D

4 GH I 4G

5 JKL5J

6 MNO 6M

7 PQRS7

8 TUV8T

9 WX Y Z 9

Setting Up the Machine

9

8 Choosing the correct Receive Mode

The correct Receive mode is determined by the external devices and telephone subscriber services (Voicemail,

Distinctive Ring, etc.) you have (or will be using) on the same line as the Brother machine.

For details, see Using receive modes in Chapter 6 of the User's Guide.

Will you be using a Distinctive Ring number for receiving faxes?

Brother uses the term "Distinctive Ring" but other telephone companies have other names for this service such

as Custom Ringing, RingMaster, Personalized Ring, Teen Ring, Ident-A-Call, and Smart Ring. See Distinctive

Ring in Chapter 7 of the User's Guide for instruction on setting up your machine using this feature.

Will you be using Voicemail on the same telephone line as your Brother machine?

If you have Voicemail on the same telephone line as your Brother machine, there is a strong possibility that Voice

mail and the Brother machine will conflict with each other when receiving incoming calls. See Voice Mail in

Chapter 7 of the User's Guide for instructions on setting up your machine using this service.

Will you be using a Telephone Answering Device on the same telephone line as your

Brother machine?

Your external telephone answering device (TAD) will automatically answer every call. Voice messages are

stored on the external TAD and fax messages are printed. Choose External TAD as your receive mode. See

the instructions on the next page.

Will you be using your Brother machine on a dedicated fax line?

Your machine automatically answers every call as a fax. Choose Fax Only as your receive mode. See the

instructions on the next page.

Will you be using your Brother machine on the same line as your telephone?

Do you want to receive voice calls and faxes automatically

The

Fax/Tel

receive mode is used when sharing the Brother machine and your telephone on the same line. Choose

Fax/Tel

as your receive mode. See the instructions on the next page.

Important Note: You can not receive voice messages on either Voicemail or an answering machine when

choosing the Fax/Tel mode.

Do you expect to receive very few faxes?

Choose Manual as your receive mode. You control the phone line and must answer every call yourself. See the

instructions on the next page.

Setting Up the Machine

10

STEP 1

1 Press Menu.

2 Press 0.

3 Press 1.

4 Press or to select the mode.

Press OK.

5 Press Stop/Exit.

9 Tone and pulse dialing mode

(Canada only)

Your machine comes set for Tone dialing service. If

you have Pulse dialing service (rotary), you need to

change the dialing mode.

1 Press Menu.

2 Press 0.

3 Press 4.

4 Press or to select Pulse (or Tone).

Press OK.

5 Press Stop/Exit.

10 Dial Prefix

The dial prefix setting will automatically dial a

predefined number before every fax number you dial.

For example: If your phone system requires a 9 to dial

an outside number this setting will automatically dial 9

for every fax you send.

1 Press Menu.

2 Press 0.

3 Press 5 (For Canada, press 6).

4 Press or to choose On or Off and

press OK.

Do one of the following:

 If you chose On, go to step 5.

 If you chose Off, go to step 7.

5 Press 1 or 2 to choose 1.Change or 2.Exit.

Do one of the following:

 If you chose 1.Change, go to step 6.

 If you chose 2.Exit, go to step 7.

Note

The default setting is “9 ”.

6 Enter the prefix number (up to 5 digits) on the

dial pad, and then press OK.

Note

• You can use numbers 0 to 9 , # ,and !.

(Press Hook to display “!“.)

• You cannot use ! with any other numbers or

characters.

• If the pulse dialing mode is on, # and * are not

available to use. (Canada only)

7 Press Stop/Exit.

Setting Up the Machine

11

11 Selecting your language

(Canada only)

1 Press Menu.

2 Press 0.

3 Press 0.

4 Select your language (English or French ) by

using or and then press OK.

5 Press Stop/Exit.

12 Setting the LCD contrast

You can change the contrast to help the LCD look

lighter or darker.

1 Press Menu.

2 Press 1.

3 Press 8.

4 Press to increase the contrast.

—OR—

Press to decrease the contrast.

Press OK.

5 Press Stop/Exit.

13 Sending in the product

registration and test sheet

(USA only)

1 Fill out the Product Registration and Test

Sheet.

2 Place the sheet face up in the Automatic

Document Feeder.

Note

Make sure (Fax) is illuminated in Blue.

3 Enter the toll-free fax number:

1-877-268-9575.

4 Press Start.

Note

• You will receive a confirmation fax of your Product

Registration.

• You can also register your product online using the

On-Line Registration link from the installation

CD-ROM or go to www.brother.com/registration

.

Now go to

the next page to install the driver and software.

Supplied CD-ROM ‘MFL-Pro Suite’

12

1

Supplied CD-ROM ‘MFL-Pro Suite’

Windows

®

Install MFL-Pro Suite

You can install the MFL-Pro Suite software and

multifunction drivers.

Install Other Drivers or Utilities

You can install additional MFL-Pro Suite software

utilities.

Documentation

View the User’s Guide, Software User’s Guide and

Network User’s Guide in HTML format. You can also

view the manuals in PDF format by accessing the

Brother Solutions Center. (Internet access required)

The Software User’s Guide and Network User’s

Guide include instructions for features available when

connected to a computer. (eg. printing, scanning and

networking details)

On-Line Registration

Register your machine from the Brother Product

Registration Page.

Brother Support

View contact information for Brother Customer

Service and how to find a Brother Authorized Service

Center. For Supplies Information, visit our site for

original/genuine Brother supplies at

http://www.brother.com/original/

.

Repair MFL-Pro Suite (For USB users only)

If an error occurred during the installation of the

MFL-Pro Suite, use this selection to automatically

repair and re-install the MFL-Pro Suite.

Note

MFL-Pro Suite includes the Printer Driver,

Scanner Driver, Brother ControlCenter3,

ScanSoft™ PaperPort™ 11SE with OCR by

NUANCE™. ScanSoft™ PaperPort™ 11SE is a

document management application for scanning

and viewing documents.

Macintosh

®

Start Here OSX

You can install the MFL-Pro Suite that includes the

printer driver, scanner driver, the Brother

ControlCenter2 and BRAdmin Light for Mac OS

®

X

10.2.4 or greater.

Documentation

View the User’s Guide, Software User’s Guide and

Network User’s Guide in HTML format. You can also

view the manuals in PDF format by accessing the

Brother Solutions Center. (Internet access required)

The Software User’s Guide and Network User’s

Guide include instructions for features available when

connected to a computer. (eg. printing, scanning and

networking details)

Brother Solutions Center

Access the Brother Solutions Center for FAQs, User’s

Guide, driver updates and tips for using your

machine. (Internet access required)

Presto! PageManager

You can install Presto!

®

PageManager

®

to add OCR

capability to the Brother ControlCenter2 and easily

scan, share and organize photos and documents.

On-Line Registration

Register your machine from the Brother Product

Registration Page.

Utilities

You can find the following additional Utilities from this

folder.

 Wireless Device Setup Wizard

 Presto!

®

PageManager

®

Uninstaller

 BRAdmin Light

Windows

®

Macintosh

®

Installing the Driver & Software

13

STEP 2

Follow the instructions on this page for your operating system and interface.

For the latest drivers, documentation, and to find the best solution for your problem, access the Brother Solutions Center

directly from the CD-ROM / Driver or visit http://solutions.brother.com

.

The screens for Windows

®

in this Quick Setup Guide are based on Windows

®

XP.

The screens for Mac OS

®

X in this Quick Setup Guide are based on Mac OS

®

X 10.4.

For USB Interface Cable Users...................................................................................... 14

For Wired Network Interface Users............................................................................... 17

For Windows Server

®

2003, see Chapter 5 of the Network User’s Guide

For Wireless Network Interface Users (in infrastructure mode) ................................ 22

For other setup methods supported, see the Network User's Guide on the CD-ROM

for installation details.

For USB Interface Cable Users...................................................................................... 32

For Wired Network Interface Users............................................................................... 34

For Wireless Network Interface Users (in infrastructure mode) ................................ 37

For other setup methods supported, see the Network User's Guide on the CD-ROM

for installation details.

Installing the Driver & Software

14

STEP 2

Windows

®

USB

Windows

®

1

For USB Interface Cable Users (For Windows

®

2000

Professional/XP/ XP Professional x64 Edition/Windows Vista™)

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 4 through 11.

Note

• Please close any applications running before

installing the MFL-Pro Suite.

• The supplied CD-ROM includes the ScanSoft™

PaperPort™ 11SE. This software supports

Windows

®

2000 (SP4 or greater), XP (SP2 or

greater), XP Professional x64 Edition and

Windows Vista™ only. Please update to the latest

Windows

®

Service Pack before installing

MFL-Pro Suite.

1 Turn off and unplug the machine from the AC

outlet and disconnect it from your computer, if

you already connected an interface cable.

2 Turn on your computer. (You must be logged

on with administrator rights.)

3 Put the supplied CD-ROM for Windows

®

into

your CD-ROM drive. If the model name screen

appears, choose your machine. If the language

screen appears, choose your language.

4 The CD-ROM main menu will appear.Click

Install MFL-Pro Suite.

Note

• If this window does not appear, use Windows

®

Explorer to run the start.exe program from the

root folder of the Brother CD-ROM.

• For Windows Vista™, when the User Account

Control screen appears, click Allow.

5 Choose Local Connection (USB), and then

click Next. The installation will continue.

Note

If you want to install the PS driver (Brother’s

BR-Script Driver), choose Custom Install and

then follow the on-screen instructions. When the

Select Features screen appears, check

PS Printer Driver, and then continue following the

on-screen instructions.

Installing the Driver & Software

15

Windows

®

USB

Windows

®

6 After reading and accepting the ScanSoft™

PaperPort™ 11SE License Agreement, click

Yes.

The installation of ScanSoft™ PaperPort™

11SE will automatically start and is followed by

the installation of MFL-Pro Suite.

7 When the Brother MFL-Pro Suite Software

License Agreement window appears, click Yes

if you agree to the Software Licence

Agreement.

Note

For Windows Vista™, when this screen appears,

click the check box and click Install.

8 When this screen appears, remove the label

covering the USB port on the machine.

Connect the interface cable to your computer,

and then connect it to the machine.

Improper Setup

DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

9 Plug the AC power cord into an AC outlet. Turn

the power switch on.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another, please wait for a

while.

Improper Setup

DO NOT try to cancel any of the screens during

this installation.

Installing the Driver & Software

16

STEP 2

Windows

®

USB

Windows

®

10 When the On-Line Registration screen is

displayed, make your selection and follow the

on-screen instructions.

11 Click Finish to restart your computer. ( You

must be logged on with Administrator rights.)

Note

• XML Paper Specification Printer Driver

The XML Paper Specification Printer Driver is the

most suitable driver when printing from the

applications that use the XML Paper Specification

documents. Please download the latest driver by

accessing the Brother Solutions Center at

http://solutions.brother.com

.

• After restarting the computer, the Installation

Diagnostics will run automatically. If the

installation is unsuccessful, the installation results

window will be shown. If the Installation

Diagnostics shows a failure, please follow the

on-screen instruction or read the on-line help and

FAQs in Start/All Programs/ Brother/

MFC-XXXX.

The MFL-Pro Suite (including printer

driver and scanner driver) has been

installed and the installation is now

complete.

Installing the Driver & Software

17

Windows

®

Windows

®

Wired

Network

2

For Wired Network Interface Users (For Windows

®

2000

Professional/XP/ XP Professional x64 Edition/Windows Vista™)

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 4 through 11.

Note

The supplied CD-ROM includes the ScanSoft™

PaperPort™ 11SE. This software supports

Windows

®

2000 (SP4 or greater), XP (SP2 or

greater), XP Professional x64 Edition and

Windows Vista™ only. Please update to the latest

Windows

®

Service Pack before installing

MFL-Pro Suite.

1 Turn off and unplug the machine from the AC

outlet.

2 Connect the network interface cable to the

machine, and then connect it to your network.

3 Plug the AC power cord into an AC outlet. Turn

the power switch on.

4 Turn on your computer. (You must be logged

on with Administrator rights.) Close any

applications running before installing the MFL-

Pro Suite.

Note

Before installation, if you are using personal

firewall software, disable it. After the installation,

restart your personal firewall software.

5 Put the supplied CD-ROM into your CD-ROM

drive. If the model name screen appears,

choose your machine. If the language screen

appears, choose your language.

6 The CD-ROM main menu will appear. Click

Install MFL-Pro Suite.

Note

• If this window does not appear, use Windows

®

Explorer to run the start.exe program from the

root folder of the Brother CD-ROM.

• For Windows Vista™, when the User Account

Control screen appears, click Allow.

Installing the Driver & Software

18

STEP 2

Windows

®

Windows

®

Wired

Network

7 Choose Wired Network Connection

(Ethernet), and then click Next.

Note

If you want to install the PS driver (Brother’s

BR-Script Driver), choose Custom Install and

then follow the on-screen instructions. When the

Select Features screen appears, check

PS Printer Driver, and then continue following the

on-screen instructions.

8 After reading and accepting the ScanSoft™

PaperPort™ 11SE License Agreement,

click Yes.

The installation of ScanSoft™ PaperPort™

11SE will automatically start and is followed by

the installation of MFL-Pro Suite.

9 When the Brother MFL-Pro Suite Software

License Agreement window appears, click Yes

if you agree to the Software License

Agreement.

10 If the machine is configured for your network,

choose the machine from the list, and then click

Next. This window will not appear if there is

only one machine connected on the network, it

will be chosen automatically.

If your machine shows APIPA in the IP

Address field, click Configure IP Address

and enter an IP address for your machine that

is suitable for your network.

Note

If the machine is not yet configured for use on your

network, the following screen appears.

Click OK.

The Configure IP Address window will appear.

Enter an IP address for your machine that is

suitable for your network by following the on-

screen instructions.

11 The installation of the Brother drivers will

automatically start. The installation screens

appear one after another, please wait for a

while.

Improper Setup

DO NOT try to cancel any of the screens during

this installation.

Note

For Windows Vista™, when this screen appears,

click the check box and click Install.

La pagina sta caricando ...

Brother MFC-9840CDW Guida di installazione rapida

Brother MFC-9840CDW Guida di installazione rapida

in altre lingue

Documenti correlati

Altri documenti