Brother PT 1900 - P-Touch Electronic Labeling System Manuale utente

Tipo
Manuale utente
INTRODUCTION
Thank you for purchasing the P-touch 1900/1910!
Your new P-touch will allow you to create labels and stamps for any need. Its versatility
enables you to design custom labels by choosing from a variety of frame designs and from
many character sizes and styles. In addition, the four tape widths (1/4” (6 mm), 3/8” (9 mm),
1/2” (12 mm) and 3/4” (18 mm)) and variety of tape colors allow you to print personalized
labels, useful for color-coded filing.
You no longer have to worry about urgent tasks that require professional printing. In the office,
the factory, the lab and the home, the quality and performance of the P-touch 1900/1910
makes it an extremely practical machine.
Finally, as you may want to occasionally refer to this User’s Guide, we suggest that you keep it
in a handy place.
(The PT-1900 and the PT-1910 models are equipped with the same functions; however, the
PT-1910 includes a carrying case and additional tape.)
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by Brother Industries, Ltd. could void
the users authority to operate the equipment.
Patent numbers and patent publication numbers which are related to this product are as
below:
USP4839742 USP4983058 USP5120147
USP4927278 USP5009530
USP4976558 USP5069557
i
Brother
®
90 Days/One Year Limited Warranty and Replacement Service
(For USA Only)
This warranty gives you certain rights and
you may also have other rights that may
vary from state to state.
This warranty is given only to the original
end-use purchaser (referred to in this
warranty as “Original Purchaser”) of the
accompanying product (referred to in this
warranty as “this Product”).
What is covered:
Brother warrants to only the Original
Purchaser for 90 days from the date of
original purchase by the Original
Purchaser (referred to in this warranty as
“90 Day Period”) of the Product that there
are no defects in the materials,
workmanship or Year 2000 compliance of
this Product. Provided the Original
Purchaser informs Brother International
Corporation (“Brother”) of the need for
Product service before the last day of the
90 Day Period, provided the Original
Purchaser provides proof of the date of
original purchase by the Original
Purchaser, and provided this warranty is
not void, Brother or its authorized service
center will repair or (at Brother’s option)
replace this Product free of charge, but
only to the extent such service is required
due only to defective materials,
workmanship or Year 2000 compliance.
After the 90 Day Period, and until one
year from date of original purchase by the
Original Purchaser (referred to in this
warranty as “Secondary Period”) and
provided this warranty is not void, Brother
or its authorized service center will
furnish, free of charge, a replacement part
for the defective part of this Product. The
Original Purchaser shall pay for all labor
charges during the Secondary Period.
The replacement of defective parts
without charge during the Secondary
Period does not include consumable and
accessory items such as tapes, cutters,
stamps, power adapters etc.
What is NOT covered:
This warranty is VOID -- that is, this
Product has no warranty -- if: (1) you did
not purchase this Product from an
authorized Brother reseller within the
United States, (2) this Product has been
serviced, modified or tampered with by
anyone other than an Authorized Service
Representative of Brother, (3) the serial
number has been modified, defaced or
removed from this Product, (4) this
Product has been abused or damaged,
(5) non Brother®-brand or non Brother
approved parts, supplies, or other
accessories have been used with this
Product.
What to do if you think your Product is
defective:
Call our Customer Service Hotline (listed
below) or if you suspect a defect in
materials or workmanship in this Product,
you can report it to a Brother Authorized
Service Center. During either the 90-Day
Period or the Secondary Period
(collectively referred to in this warranty as
the “Warranty Period”), supply Brother’s
representative with a copy of your dated
bill of sale showing that this Product was
purchased within the United States. For
the name of a Brother Authorized Service
Center, call the Brother Automated Fax
Back number or visit the Brother World
Wide Web (listed below). After contacting
the Brother Authorized Service Center,
you may be required to deliver or send the
Product properly packaged, freight
prepaid, to the Authorized Service Center
together with a photocopy of your bill of
sale.
What Brother will do:
Brother (or its Authorized Service Center)
will evaluate your report of a possible
defect to determine whether a defect
exists, and if it does exist, Brother (or its
Authorized Service Center) will repair or
(at Brother’s option) replace the Product
with a product that performs the same
functions and performs as well as the
original Product. Brother reserves the
right to supply refurbished or
remanufactured replacement products
provided that the replacement products
conform to the manufacturer’s
specifications for new Products. The
repaired or replacement product will be
returned to you freight prepaid.
ii
Brother
®
90 Days/One Year Limited Warranty and Replacement Service
(For USA Only)
Replacement Service:
Replacement service will expedite the ex-
change of your non-working Product with a
refurbished or remanufactured product that
conforms to the manufacturer’s specifica-
tions for new Products. The refurbished or
remanufactured Product you receive will be
covered by the balance of the limited warran-
ty period remaining on the original Product,
plus an additional thirty (30) days. You will
keep the replacement Product that is sent to
you and must return (or be billed up to the
cost of a new product) your original non-
working product, which shall become the
property of Brother. You must call Brother
Customer Service and if the representative
cannot correct the Product’s malfunction
over the telephone and you elect the Ex-
change Service, you must provide informa-
tion pertaining to this Product and you must
also provide a valid major credit card num-
ber. Your credit card will be charged up to
the cost of a new Product if: (i) you do not re-
turn your original Product to Brother within
five (5) business days; (ii) the malfunctions
of your original Product are not covered by
the limited warranty; (iii) the proper packag-
ing instructions are not followed and has
caused damage to the product; or (iv) the
warranty period on your original Product has
expired or has not been sufficiently validated
with a copy of the proof of purchase (bill of
sale). The Brother Customer Service Repre-
sentative will ship the exchange Product with
return instructions and prepaid return airbill.
Follow the return instructions. You must re-
turn the original Product in the same ship-
ping carton in which the exchanged Product
was received and include a copy of proof of
purchase (bill of sale). Retain your original
accessory items and a copy of the return air-
bill, signed by the courier.
Limitations:
Repair or replacement as described above is
your sole and exclusive (that is, your only)
remedy if this Product is defective. Brother is
not responsible for damage to or loss of any
equipment, media, programs or data related
to the use of this Product. Except for that
repair or replacement, Brother shall not be
liable for any direct, indirect, incidental or
consequential damages or specific relief.
Because some states do not allow the
exclusion or limitation of consequential or
incidental damages, the above limitation
may not apply toyou.
THIS WARRANTY IS GIVEN IN LIEU OF
ALL OTHER WARRANTIES, WRITTEN OR
ORAL, WHETHER EXPRESSED BY
AFFIRMATION, PROMISE, DESCRIPTION,
DRAWING, MODEL OR SAMPLE. ANY AND
ALL WARRANTIES OTHER THAN THIS
ONE, WHETHER EXPRESS OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED.
This Limited Warranty is the only warranty
that Brother is giving for this Product. It is the
final expression and the exclusive and only
statement of Brother’s obligations to you. It
replaces all other agreements and under-
standings that you may have with Brother or
its representatives.
This Limited Warranty (and Brother’s
obligation to you) may not be changed in any
way unless you and Brother sign the same
piece of paper in which we (1) refer to this
Product and your bill of sale date, (2)
describe the change to this warranty and (3)
agree to make that change.
iii
Important Information
Should you have questions, or need information about your Brother Product, we have a variety
of support options for you to choose from:
USA-Customer Service:
Customer Service
877-478-6824 (voice)
Customer Service
901-379-1210 (fax)
Automated Faxback
800-521-2846
World Wide Web
www.brother.com
Supplies / Accessories
www.brothermall.com
or 888-879-3232
BROTHER INTERNATIONAL CORPORATION
100 SOMERSET CORPORATE BLVD.
BRIDGEWATER, NEW JERSEY 08807-0911
Please record your model and serial number and your date and location of Purchase below for
your records. Keep this information with your proof of purchase (bill of sale) in case your
Product is lost, stolen or requires service.
Model #
Serial #
Date of purchase:
Store where purchased:
Location of store:
Important:
We recommend that you keep all original packing materials, in the event you ship
this product.
iv
CONTENTS
Getting Started
GENERAL DESCRIPTION ...................................................................................1
GENERAL PRECAUTIONS ..................................................................................3
BATTERIES .........................................................................................................3
OPTIONAL AC ADAPTOR ................................................................................. 4
TAPE CASSETTE .................................................................................................5
ATTACHING LABELS .........................................................................................6
PRINT HEAD & ROLLERS ................................................................................... 7
For Your Information
POWER KEY .......................................................................................................8
CURSOR KEYS ...................................................................................................8
CODE, ALT & SHIFT KEYS .................................................................................9
SPACE KEY ....................................................................................................... 12
RETURN KEY .................................................................................................... 12
TAB FUNCTION ..............................................................................................13
DELETE KEY .....................................................................................................15
LINE OUT FUNCTION .....................................................................................16
CLEAR FUNCTION ..........................................................................................17
ACCENT FUNCTION .......................................................................................19
SYMBOL FUNCTION .......................................................................................20
AUTO FORMAT FUNCTION ...........................................................................22
STAMP FUNCTION .......................................................................................... 23
FONT FUNCTION ...........................................................................................26
SIZE & WIDTH FUNCTIONS ............................................................................ 27
STYLE FUNCTION ...........................................................................................29
UNDERLINE FUNCTION .................................................................................31
FRAME FUNCTION .......................................................................................... 32
TAPE MARGIN FUNCTION .............................................................................33
HORIZONTAL ALIGNMENT FUNCTION ........................................................34
MIRROR PRINTING FUNCTION ...................................................................... 35
LENGTH FUNCTION ....................................................................................... 36
AUTO CUT FUNCTION ................................................................................... 38
v
PRINT KEY .......................................................................................................39
FEED & CUT FUNCTION ................................................................................. 40
NUMBERING FUNCTION ...............................................................................40
REPEAT PRINTING FUNCTION .......................................................................42
MEMORY FUNCTIONS .................................................................................... 43
TROUBLESHOOTING ......................................................................................47
ERROR MESSAGE LIST .....................................................................................48
SPECIFICATIONS .............................................................................................51
ACCESSORIES ..................................................................................................52
INDEX ..............................................................................................................54
BROTHER CONTACT INFORMATION ............................................................56
vi
1
TOP VIEW
BOTTOM VIEW
Getting Started
GENERAL DESCRIPTION
Tape compartment
cover
LCD display
Keyboard
AC adaptor
connector
Tape exit slot
Battery compartment cover
2
KEYBOARD & LCD DISPLAY
3
To avoid injuries, do not touch the cutters edge.
Use only Brother TZ tapes with this machine to avoid damage. Do not use tapes that do
not have the mark. Brother cannot be held responsible for trouble or damage by the
use of unauthorized supplies.
Do not pull on the tape being fed from the P-touch. This may damage the tape cassette.
Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.
Do not expose the machine to high temperatures or high humidity. Never leave it on the
dashboard or in the back of your car.
Do not leave any rubber or vinyl on the machine for an extended period of time. Doing
so may cause staining.
Do not clean the machine with alcohol or other organic solvents. Use a soft, dry cloth only.
Do not put any foreign objects into or anything on the machine.
Use only the AC adaptor (model AD-60) designed exclusively for this machine. Use of
any other adaptor may void the warranty.
Do not try to disassemble the AC adaptor.
When the machine is not being used for a long period of time and it is not necessary to
keep the text files stored in the memory, disconnect the AC adaptor, and remove the bat-
teries to prevent them from leaking and damaging the machine.
When the AC adaptor is connected, unplugging the adaptor from the electrical outlet
before unplugging it from the machine can delete all text files in the memory, even if bat-
teries are installed.
Use six AA alkaline batteries in this machine.
If the batteries are not installed with their positive and negative poles pointing in the cor-
rect direction, the batteries may leak, overheat or burst, or the print head may overheat.
This portable machine can be used anywhere by installing six (6)
AA alkaline batteries
.
When
you change the batteries, always replace all six at the same time.
To change the batteries:
1
Remove the battery compartment cover on the back of the machine.
2
If batteries are already installed, remove them.
3
Insert six new AA alkaline batteries, making sure that their poles point in the correct direction.
4
Attach the battery compartment cover.
Be sure to insert the new batteries within five minutes of removing the old ones,
otherwise the text shown in the display and any text files stored in the memory will
be lost (unless the machine is plugged into an AC outlet with the AC adaptor).
GENERAL PRECAUTIONS
BATTERIES
4
Remove the batteries and disconnect the AC adaptor if you do not intend to use this
machine for an extended period of time. When the power is disconnected, all text
shown in the display and stored in the memory will be lost.
If the batteries are not installed with their positive and negative poles pointing in
the correct direction, the batteries may leak, overheat or burst, or the print head
may overheat.
The AC adaptor (model AD-60) allows you to use this machine wherever there is an electrical outlet.
To connect the optional AC adaptor:
1
Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the right
side of the machine.
2
Insert the plug on the adaptor into the nearest standard electrical outlet.
Only use the AC adaptor designed exclusively for this machine.
Remove the batteries and disconnect the AC adaptor if you do not intend to use this
machine for an extended period of time. When the power is disconnected, all text
shown in the display and stored in the memory will be lost.
When the AC adaptor is connected, unplugging the adaptor from the electrical out-
let before unplugging it from the machine can delete all text files in the memory,
even if batteries are installed.
OPTIONAL AC ADAPTOR
5
A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are avail-
able for this machine in a wide variety of colors and sizes, it is possible to make distinctive
color-coded and stylized labels.
In addition, this machine has been designed to allow you to change the tape cassettes quickly
and easily.
To change the tape cassette:
1
Lift open the tape compartment cover. The installed cassette is also released.
2
If a tape cassette is already installed, remove it by pulling it straight up.
3
If the ink ribbon in the tape cassette to be installed is loose, use your finger to wind the
toothed wheel in the direction of the arrow on the cassette until there is no slack in the
ribbon. Also, make sure that the end of the tape feeds under the tape guides.
If you are using a new tape cassette provided with a stopper, be sure to remove the
stopper.
4
Insert the tape cassette firmly into the tape compartment, making sure that the entire back
of the cassette touches the bottom of the compartment.
When inserting the tape cassette, make sure that the inner ribbon does not catch on
the corner of the metal guide.
5
Close the compartment cover, and then turn on the machine, if it is off.
6
Hold down
c
and press
_
once to advance the tape and remove any slack.
TAPE CASSETTE
6
LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on laminated tapes.
1
Hold the tape in your left hand, with the printed surface facing up, and hold the stick in
your right hand.
2
Pass the tape halfway through the long narrow hole in the stick.
3
Turn the stick three-quarters of a turn towards you and pull the stick away from you as
shown below.
4
Peel off the label backing.
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using an
iron. After printing the text onto fabric tape and cutting off the label using scissors
, place the
label on an ironed garment at the location where you wish to attach it in such a way that the
printed text can be read correctly. Cover the label with another piece of cloth and use an iron
set to a medium-high temperature (320 to 356 ˚F (160 to 180 ˚C)) and press down firmly for 15
to 30 seconds. For more details, refer to the instructions included with the fabric tape cassette.
STAMP TAPE
Refer to pages 23 through 25 for a detailed explanation on using the stamp tape to make stamps.
ATTACHING LABELS
GH
ABCDEF
ABCDEF
7
Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers.
This is particularly likely when you are using the unit outdoors or in a very dusty environment.
If a section of the print head is covered with dust, a black horizontal streak may appear
through the label text. Therefore, as with a tape recorder, the machine’s head may need to be
cleaned from time to time.
To clean the print head and rollers:
1
Turn off the machine.
2
Open the tape compartment cover, and then remove the tape cassette if one is installed.
The print head and rollers are located in the tape compartment.
3
Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down
motion.
Rollers: Use a dry cotton swab to wipe each roller with an up-and-down motion while
rotating them with your finger.
4
Install a tape cassette, close the tape compartment cover, and then try printing again.
5
If a black streak still appears in the label, repeat steps
3
and
4
using a cotton swab
dipped in isopropyl (rubbing) alcohol.
If none of the above works, contact your service representative.
The print head can be cleaned more easily if the optional print head cleaning cassette
(TZ-CL4) is used.
PRINT HEAD & ROLLERS
Print head
Print head
Print head
Rollers
Cotton swab
8
The
Power
key (
o
) is located in the lower-right corner of the keyboard. If batteries have
been installed or the machine has been plugged in using the optional AC adaptor, the previ-
ous session’s information is displayed when the machine is turned on. This feature allows you
to stop work on a label, turn off the machine, and return to it later without having to re-enter
the text.
The machine will automatically turn off if no key is pressed within 5 minutes. The machine’s
internal memory stores the current session’s information and displays it when you turn on the
machine again.
To turn on the machine:
Press
o
. The previous session’s information appears in the LCD display.
To turn off the machine:
Press
o
. The current session’s information is stored in the internal memory.
The machine’s LCD display shows two rows of 9 characters; however, the text that you create
can be up to 99 characters long. You can review and edit different parts of the text by moving
the cursor backward and forward.
LEFT CURSOR KEY
To move the cursor one character to the left:
Press
f
once.
If this key is pressed when the cursor is at the beginning of a line following another
line, the cursor moves to the end of the previous line.
To move the cursor several characters to the left:
Hold down
f
until the cursor moves to the desired position.
To move the cursor to the beginning of the current line:
Hold down
c
and press
f
.
For Your Information
POWER KEY
CURSOR KEYS
9
RIGHT CURSOR KEY
To move the cursor one character to the right:
Press
w
once.
If this key is pressed when the cursor is at the end of a line followed by another
line, the cursor moves to the beginning of the next line.
To move the cursor several characters to the right:
Hold down
w
until the cursor moves to the desired position.
To move the cursor to the end of the current line:
Hold down c and press w.
UP CURSOR KEY
To move the cursor up to the previous line:
Press h once.
If the cursor is in the first line of text, it will move to the beginning of the line.
To move the cursor up several lines:
Hold down h until the cursor moves to the desired line.
To move the cursor to the beginning of the entire text:
Hold down c and press h.
DOWN CURSOR KEY
To move the cursor down to the following line:
Press e once.
If the cursor is in the last line of text, it will move to the end of the line.
To move the cursor down several lines:
Hold down e until the cursor moves to the desired line.
To move the cursor to the end of the entire text:
Hold down c and press e.
Most characters can be entered simply by pressing their keys. However, to use special func-
tions or to enter capital letters, accented characters and some symbols, the following special
keys are necessary.
CODE KEY
To use a function printed above a key:
Hold down c and press the key immediately below the desired function.
CODE, ALT & SHIFT KEYS
10
EXAMPLE
ALT KEY
To type in characters printed in color on the right-hand side of the keys:
Hold down a and press the key of the desired character written in color. The Alt indi-
cator on the left side of the display comes on while a is held down.
EXAMPLE
To start the Symbol function:
Hold down c and press a once.
To type in “–”:
Hold down a and press / once. The Alt indicator comes on while a is held
down.
1:
DANGER_
ÆæÃã
Ü
1:
012_
1:
012–_
Alt
11
SHIFT KEY
To type in an uppercase letter or a symbol printed in the top left-hand corner of a key:
Hold down s and press the key of the desired letter or symbol.
EXAMPLE
The Caps mode is similar to holding down s. It allows you to type capital letters continu-
ously.
To type in many capital letters:
1 Hold down c and press s. The Caps indicator on the left side of the display
comes on.
2 Press the keys of the desired letters or symbols.
3 To exit Caps mode, hold down c and press s. The Caps indicator goes off.
To type in “%”:
Hold down s and press 5.
1:
5 _
1:
5%_
1:
_
Caps
12
The Space key ( _ ) lets you add blank spaces between characters in your text. It is differ-
ent from the right cursor key ( w ), which just moves the cursor without adding blank
spaces.
To add a space:
Press _.
EXAMPLE
As on a typewriter or word processor, this machine’s Return key ( r ) is used to end a line
of text and start another one. When you have finished entering one line, press the return key to
make a new line and move the cursor to it.
The text can only contain a maximum of four lines. If you press r when four text
lines already exist, the error message “4 LINE LIMIT!” will appear.
To add a space:
Press _.
SPACE KEY
1:
J._
1:
J. _
RETURN KEY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114

Brother PT 1900 - P-Touch Electronic Labeling System Manuale utente

Tipo
Manuale utente