Instruction for use

MiniBoard

IMM1045_IFU.Version11.2023-02-13

Brugervejledning – Dansk .............. 19

Käyttöohjeet – Suomi .....................24

Gebrauchsanweisung – Deutsch ... 29

... 39

Istruzioni per l’uso – Italiano ......... 44

Instrucciones de uso – Español .... 49

ES IT FR NL DE FI DA NO SV GB ILL.

to bed.

Acute care, Long-term care, Home care

To avoid accidents and injury when moving and handling the

products, please read this manual carefully.

The person described as “the user” in this “Instruction for Use”

is the person who is lying or sitting on the product. The carers

are the people who manoeuvre the product.

without prior warning. All measurements given on illustrations

and similar material are for guidance only and Etac cannot be

held liable for errors and defects.

Symbols in general

ES IT FR NL DE FI DA NO SV GB ILL.

Positioning MiniBoard under the user: Roll the user slightly

against the direction of movement. Then fold the functional

handles alongside the user in under MiniBoard, and slide

assess working conditions and space available vis-à-vis correct

manual handling techniques and the total weight that can be

lifted responsibly.

Always check the product before use and after washing.

Never use a defective product. If the product shows signs of

wear-and-tear, it must be scrapped.

Read these instructions carefully.

It is important that carers receive instruction in manual

handling. Etac offers advice and training for carers. For further

information, contact Etac.

There is a risk that the user may slide off. Never leave

Never leave the product on the oor.

Always conduct a risk assessment, and ensure that the

assistive product can be used for the individual user

and, in combination with other devices, that it is safe

for the user and carers.

For use at temperatures between 0ºC-60ºC.

Top side: Nylon

Inner surface: Polypropylene board (removable)

Foam: Polyethylene

Handles: Polyester

Assembling system: Hook & loop.

The product should be checked regularly, preferably each time it

ES IT FR NL DE FI DA NO SV GB ILL.

IM8011054 MiniBoard M W540xL1100

IM8015054 MiniBoard L W540xL1500

IM8012454 MiniBoard w/head support L W540xL1240

Service information

First inspection:

• Is the packaging intact?

• Read the label on the packaging and check the article no. and product description

• Check that Short Instruction is enclosed – updated User Manual/Instruction for use can be downloaded from www.etac.com or contact your Etac

Visual inspection/Check the product:

Ensure that the materials, seams, stitching,

handles, buckles are intact/faultless.

Mechanical load or stress/Test handles:

Draw hard in the handles in opposite directions

and control the material, seams and stitching.

Test buckles:

Lock the buckle and draw in opposite directions,

control the buckle and the stitching.

Stability test:

Try to bend the product verify that it feels rm,

stable and solid.

Test low/high friction:

Place the product on a rm surface or a bed,

place your hands on the material and test the

friction by pushing your hands down into the

product.

Low friction – slides effortlessly

High friction – no sliding/moving

ES IT FR NL DE FI DA NO SV GB ILL.

Les bruksanvisningen grundig.

Det er viktig at assistenter får opplæring i manuell forytning.

Etac tilbyr rådgivning og opplæring av assistenter. Kontakt Etac

for ytterligere informasjon.

Korrekte teknikker for manuell forytning må alltid brukes.

Brukeren kan oppfordres til å bidra når det er mulig.

Den manuelle forytningen må alltid planlegges på forhånd for å

sikre at brukeren er trygg og at all manuell forytning foregår så

smidig som mulig.

Materiale og rengjøring

Overside: Nylon

Indre overate: Polypropylen brett (kan fjernes)

Skum: Polyetylen

Håndtak: Polyester

Fester: Borrelås.

ES IT FR NL DE FI DA NO SV GB ILL.

IM8011054 MiniBoard M W540xL1100

IM8015054 MiniBoard L W540xL1500

IM8012454 MiniBoard w/head support L W540xL1240

Serviceinformasjon

Første gangs inspeksjon:

• Er emballasjen hel?

• Les etiketten på emballasjen, og kontroller artikkelnummer og produktbeskrivelse.

• Kontroller at den kort brukerveiledning er vedlagt. Oppdatert bruksanvisning kan lastes ned fra www.etac.no. Du kan også kontakte

Etacs kundeservice eller din forhandler.

• Kontroller etiketten på produktet. Inneholder den artikkelnummer, produktbeskrivelse, LOT-/batchnummer, vaskeanvisning og

leverandørens navn?

Periodisk inspeksjon:

MiniBoard placeres under brugeren, ved at brugeren vippes

let modsat bevægelsesretningen, funktionshåndtagene, der

er langs med brugeren, foldes ind under MiniBoard, hvorpå

Hjælperne tager nu fat i funktionshåndtagene og kan forytte

brugeren rundt i sengen, fra en seng til en anden, liggende til

siddende til stående m.m. (Illustration 1 og 2).

Anvendes MiniBoard til løft fra gulv, bør hjælperne vurdere