Oregon Scientific BAR986HG Manuale utente

Slimline Weather Station

Model: BAR988HG / BAR986HG

User Manual

BAR988HG English Cover R5 OP 8/20/04, 11:26 AM1

Black

EN

1

CONTENTS

Introduction .............................................................. 3

Product Overview .................................................... 4

Front View.............................................................. 4

Back View .............................................................. 5

LCD Display ........................................................... 6

Remote Sensor (RTGR328N)................................ 9

Getting Started ....................................................... 10

Batteries ............................................................... 10

AC Adaptor (Main Unit) ........................................ 11

Change Settings .................................................. 11

Remote Sensor ....................................................... 11

Set Up Thermo / Hygro Sensor (RTGR328N) ..... 12

Sensor Data Transmission .................................. 13

Search for Sensor ................................................ 13

Clock and Calendar ............................................... 13

Radio-Controlled Clock ........................................ 14

Turn Radio-Controlled Clock ON / OFF ............... 14

Set Clock ............................................................. 15

Switch Clock Display ........................................... 15

Alarms ..................................................................... 15

Set Daily Alarm .................................................... 15

Set Pre-Alarm ...................................................... 16

Activate Alarm ...................................................... 16

Snooze ................................................................ 16

Barometer ............................................................... 16

View Barometer Area ........................................... 16

Select Measurement Unit .................................... 17

View Barometer History ....................................... 17

Bar Chart Display ................................................. 17

Set Altitude ........................................................... 17

Weather Forecast ................................................... 18

Weather Forecast Icons ....................................... 18

UV Measurement .................................................... 18

New Additional UV Features ................................ 19

Temperature and Humidity .................................... 20

View Temperature and Humidity Area ................. 20

Select Measurement Unit .................................... 20

Select Sensor Channel ........................................ 20

Minimum / Maximum Records ............................. 20

Temperature and Humidity Trend ........................ 21

Comfort Zone ....................................................... 21

Heat Index ........................................................... 21

Slimline Weather Station

Model: BAR988HG / BAR986HG

User Manual

BAR988HG English R5 OP 8/20/04, 11:25 AM1

Black

EN

2

Backlight ................................................................. 22

Reset System ......................................................... 22

Safety and Care ...................................................... 22

Warnings ................................................................. 22

Troubleshooting ..................................................... 23

Specifications ......................................................... 23

About Oregon Scientific ........................................ 25

EC-Declaration of Conformity ............................... 26

BAR988HG English R5 OP 8/20/04, 11:25 AM2

Black

EN

3

NOTE

INTRODUCTION

Thank you for selecting the Oregon ScientificTM

BAR988HG / BAR986HG Slimline Weather Station. This

powerful device bundles time keeping, weather

monitoring, indoor and outdoor temperature and humidity

readings, barometric trends and altitude adjustment, into

a single tool you can use from the convenience of your

home.

In this box, you will find:

• Main unit

• Remote sensor (RTGR328N)

• Optional UV sensor (UVR138)

• 6V AC adapter

• Batteries

BAR988HG --- BAR988HG Main Unit + RTGR328N

Remote Sensor

BAR986HG --- BAR988HG Main Unit + RTGR328N

Remote Sensor + UVR138 UV Sensor

The THGR328N (5-Channel) and THGR228N

(3-Channel) remote sensors are also compatible with

this weather station. Additional sensors are sold

separately. Please contact your local stockist for more

information.

Keep this manual handy as you use your new product.

It contains practical step-by-step instructions, as well

as technical specifications and warnings you should

know.

BAR988HG English R5 OP 8/20/04, 11:25 AM3

Black

EN

4

PRODUCT OVERVIEW

FRONT VIEW

1. LCD display

2. MODE: Change settings / display

3. MEMORY: View current, maximum and minimum

temperature / humidity / UV readings

4. HISTORY: View historical barometer and UV

readings

5. ALARM / : View alarm status; set alarm

6. SNOOZE / LIGHT: Activate 8-minute snooze or

backlight

7. SELECT: Switch Areas

8. CHANNEL: Switch remote sensor display

9. UP: Increase setting / activate radio-controlled clock

10. DOWN: Decrease setting / deactivate radio-

controlled clock

2

1

7

8

9

10

3

4

5

6

BAR988HG English R5 OP 8/20/04, 11:25 AM4

Black

EN

5

1. Ventilation holes

2. Battery compartment (bottom)

3. AC adaptor socket

4. °C / °F switch (in battery compartment)

5. RESET button (in battery compartment)

6. mb / inHg switch (in battery compartment)

You can adjust the angle of the clock display as

shown below:

BACK VIEW

2

1

3

4

5

6

BAR988HG English R5 OP 8/20/04, 11:25 AM5

Black

EN

6

LCD DISPLAY

1. Weather Forecast Area: Animated weather forecast

2. Temperature / Humidity / Comfort Zone Area:

Readings and trend lines; comfort zone; sensor

channel number

3. UVI / Barometer Area: UV level and barometric

pressure bar chart; UV Index and barometric

readings

4. Clock / Alarm / Calendar Area: Radio-controlled

clock; alarms; calendar

1

2

3

4

BAR988HG English R5 OP 8/20/04, 11:25 AM6

Black

EN

7

Weather Forecast Area

1. Low battery icon for main unit

2. AC adaptor icon - displays when unplugged

3. Weather display

1

2

3

Temperature / Humidity / Comfort Zone Area

1. Selected Area icon

2. Temperature trend

3. Channel number (1-5) / reception status

4. Low battery icon for remote sensor

5. Humidity trend

6. MAX / MIN temperature

7. Temperature - °C / °F

8. Heat Index

9. MAX / MIN humidity

10. Humidity

11. Comfort levels

7

8

10

6

9

11

2

1

5

3

4

BAR988HG English R5 OP 8/20/04, 11:25 AM7

Black

EN

8

UVI / Barometer Area

1. Barometric pressure is showing

2. UV is showing

3. Low battery icon for UV sensor

4. UVI value is showing

5. UV exposure time countdown has started

6. UV index level

7. UV exposure time for user

8. Barometer / UV chart

9. SPF applied to user for UV exposure

10. User skin type for UV exposure

11. User no. (for UV Mode) or hour history for UV /

Barometric pressure reading

12. Altitude / barometric pressure / UVI reading

Clock / Alarm / Calendar Area

1. Pre-Alarm is set

2. Pre-Alarm display / Pre-Alarm setting

3. Channel with RF clock reception is locked

4. RF clock reception icon

5. Daily Alarm is set

6. Offset time-zone

7. Time / date / calendar

11

9

10

8

12

1

2

4

3

6

7

5

6

7

3

2

1

5

4

BAR988HG English R5 OP 8/20/04, 11:25 AM8

Black

EN

9

REMOTE SENSOR (RTGR328N)

1

2

3

1. LCD display

2. LED status indicator

3. Ventilation duct

1

4

5

6

7

2

3

1. Signal reception

2. Channel number

3. Low battery icon

4. Time

5. Temp (°C or °F)

6. Humidity %

7. Temp / Humidity

BAR988HG English R5 OP 8/20/04, 11:25 AM9

Black

EN

10

GETTING STARTED

BATTERIES

Batteries are supplied with this product:

• Main unit 4 x UM-4 (AAA) 1.5V

• Remote unit 2 x UM-3 (AA) 1.5V

Insert batteries before first use, matching the polarity as

shown in the battery compartment. For best results,

install batteries in the remote sensor before the main

unit. Press RESET after each battery change.

To install the main unit batteries:

1

2

3

4

5

6

7

8

1. Wall mount

2. CHANNEL switch (1-5)

3. RESET

4. °C / °F

5. SEARCH

6. EU / UK radio signal format switch

7. Battery compartment

8. Fold-out stand

Do not use rechargeable batteries.

shows when batteries are low.

NOTE

BAR988HG English R5 OP 8/20/04, 11:25 AM10

Black

EN

11

It is recommended that you use alkaline

batteries with this product for longer performance.

NOTE

UNIT LOCATION

Main Weather Forecast Area

Remote Temperature / Humidity Area

UV Sensor UVI / Barometric Pressure Area

AC ADAPTOR (MAIN UNIT)

The batteries serve as a back-up power supply. For

continuous use, please install the AC adaptor at the base

of the unit:

shows in the Weather Forecast Area when the AC

adapter is not plugged in.

CHANGE SETTINGS

1. Press SELECT to switch between Areas.

indicates the selected Area.

2. Most Areas have alternate display options

(for example, Clock / Alarm or Barometer / UVI).

Press MODE to switch options, or ALARM / to

switch between clock and alarm.

3. Press and hold MODE for 2 seconds to enter setting

mode.

4. Press UP or DOWN to change settings.

5. Press MODE to confirm.

REMOTE SENSOR

This product is shipped with the RTGR328N Thermo /

Hygro Sensor. The main unit can collect data from up to

6 sensors (5 Thermo / Hygro Sensors and 1 UV Sensor).

The THGR328N and THGR228N sensors are also

compatible with this weather station. (Additional sensors

are sold separately. Contact your local stockist for more

information.)

BAR988HG English R5 OP 8/20/04, 11:25 AM11

Black

EN

12

SWITCH OPTION

Channel If you are using more than one

sensor, select a different channel

for each sensor.

Radio Signal

Format

EU (DCF) / UK (MSF)

4. Press RESET. Then set the temperature unit.

SWITCH OPTION

Temp °C / °F

To fold out the stand:

1

2

For best results:

• Insert the batteries and select the unit, channel,

and radio signal format before you mount the

sensor.

• Place the sensor out of direct sunlight and

moisture.

• Do not place the sensor more than 70 metres

(230 feet) from the main (indoor) unit.

• Position the sensor so that it faces the main

(indoor) unit, minimizing obstructions such as

doors, walls, and furniture.

• Place the sensor in a location with a clear view to

the sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during

cold winter months as below-freezing

temperatures may affect battery performance and

signal transmission.

The RTGR328N Sensor collects temperature and

humidity readings, and signals from official time-keeping

organizations for the radio-controlled clock.

SET UP THERMO / HYGRO SENSOR (RTGR328N)

1. Open the battery compartment with a small Phillips

screwdriver.

2. Insert the batteries.

3. Set the channel and radio signal format. The switches

are located in the battery compartment.

5. Close the battery compartment.

BAR988HG English R5 OP 8/20/04, 11:25 AM12

Black

EN

13

The transmission range may vary and is subject

to the receiving range of the main unit.

You may need to experiment with various locations to

get the best results.

SENSOR DATA TRANSMISSION

Data is sent from the sensor(s) every 60 Seconds. The

reception icon shown in the Temperature / Humidity Area

indicates the status.

NOTE SEARCH FOR SENSOR

To search for a Thermo / Hygro sensor, press SELECT

to navigate to the Temperature / Humidity Area. will

show next to the Area. Then, simultaneously press and

hold MEMORY and CHANNEL for 2 seconds.

To search for the UV sensor, press SELECT to navigate

to the UVI / Barometer Area. will show next to the

Area. Then, press and hold MEMORY and CHANNEL

for 2 seconds.

If the sensor is still not found, check the

batteries.

CLOCK AND CALENDAR

This product tracks the time and date based on radio-

controlled signals from the RTGR328N remote sensor,

or manual settings that you enter.

ICON DESCRIPTION

Main unit is searching

for sensors.

At least 1 channel has

been found.

Sensor 1 is sending

data. (The number

shows which sensor is

selected.)

--- shows in Temp /

Humidity Area

The selected sensor

cannot be found.

Search for the sensor

or check batteries.

NOTE

BAR988HG English R5 OP 8/20/04, 11:25 AM13

Black

EN

14

RADIO-CONTROLLED CLOCK

The time and date are automatically updated by radio-

controlled clock signals from official time-keeping

organizations in Frankfurt (Germany) and Rugby

(England) unless you disable this feature. The signals

are collected by the remote sensor (RTGR328N)

whenever it is within 1500 km (932 miles) of a signal.

Initial reception takes 2-10 minutes, and is initiated when

you first set up the unit, and whenever you press RESET.

Once complete, the reception icon will stop blinking.

The icon shown in the Clock Area indicates

2 factors:

• Connection between the main unit and the sensor

that collects RF signals ( )

• RF signal reception ( )

How these signals work together:

To force a manual search for RF clock reception,

press and hold SEARCH on the sensor (RTGR328N)

for 2 seconds.

TURN RADIO-CONTROLLED CLOCK ON / OFF

If you wish to manually set the clock, you must first

disable the radio-controlled feature. To do this, navigate

to the Clock / Alarm Area. Then, press and hold DOWN

on the main unit for 2 seconds. To enable it, navigate to

the Clock / Alarm Area, then press and hold UP for

2 seconds.

RF clock enabled:

ICON MEANING

The unit has contact with the

sensor and has synchronized the

time.

The unit has contact with the

sensor but the time has not been

synchronized.

ICON MEANING

The unit has lost contact with the

remote sensor but the time is

synchronized.

The unit has lost contact with the

remote sensor and the time is not

synchronized.

The unit cannot reach the remote

sensor.

NOTE

BAR988HG English R5 OP 8/20/04, 11:25 AM14

Black

EN

15

RF clock disabled:

SET CLOCK

You only need to do this if you have disabled the radio-

controlled clock, or if you are too far from a RF signal.

1. Press SELECT to navigate to the Clock Area.

will show next to the Area.

2. Press and hold MODE for 2 seconds.

3. Select the time zone offset hour (+ / -23 hours),

12 / 24 hour format, hour, minute, year, date / month

format, month, date and display language.

4. Press UP or DOWN to change the setting.

5. Press MODE to confirm.

The language options are (E) English,

(F) French, (D) German, (I) Italian, and (S) Spanish. The

language you select determines the weekday display.

SWITCH CLOCK DISPLAY

Press SELECT to navigate to the Clock Area. will

show next to the Area.

NOTE

Press MODE to toggle between:

• Clock with seconds

• Clock with day

• Clock with time-zone offset

• Calendar

ALARMS

This product has 2 alarms: The Daily Alarm and a

Pre-Alarm for snowy weather. The Daily Alarm can be

set to go off at the same time every day. The Pre-Alarm

sounds only when the Daily Alarm is activated and the

recorded temperature from Channel 1 Sensor falls to

2°C (35.6°F) or below.

SET DAILY ALARM

1. Press SELECT to navigate to the Clock Area.

will show next to the Area.

2. Press ALARM / to view the alarm. (AL will show

at the top.)

3. Press and hold ALARM / for 2 seconds.

4. Select the hour and minute. Press UP or DOWN to

change settings.

5. Press ALARM / to confirm.

6. The Daily Alarm icon will appear when the alarm

is set.

BAR988HG English R5 OP 8/20/04, 11:25 AM15

Black

EN

16

SET PRE-ALARM

The Pre-Alarm can be set to sound 15, 30, 45, or

60 minutes before the Daily Alarm. It will sound whenever

the recorded temperature from Channel 1 Sensor falls

to 2°C (35.6°F) or below.

For example, if you set the alarm to 7:00 AM, and the

Pre-Alarm to 45 minutes, the Pre-Alarm will sound at

6:15 AM provided the outdoor temperature at Channel

1 Sensor is 2°C or below.

1. Set up and activate the Daily Alarm.

2. Press ALARM /

to switch to Pre-Alarm view.

(PRE-AL will show at the top.)

3. Press and hold ALARM / for 2 seconds.

4. Press UP or DOWN to select 15, 30, 45 or

60 minutes. This is the amount of time the Pre-Alarm

will sound BEFORE the Daily Alarm. The Pre-Alarm

is automatically activated when you select a time.

5. Press ALARM / to confirm.

shows when the Pre-Alarm is set.

The Daily Alarm will NOT function until the next

day if the Pre-Alarm has been triggered. Also, if you

deactivate the Daily Alarm, the Pre-Alarm is

automatically deactivated.

NOTE

ACTIVATE ALARM

Navigate to the Clock Area, then press ALARM / to

switch to Daily Alarm or Pre-Alarm view. To activate or

deactivate the alarm, press UP or DOWN.

When the alarm time is reached, the backlight will be on

for 8 seconds and crescendo alarm will sound for

2 minutes. Press any key (except snooze) to silence

the alarm. It will sound at the same time the next day.

SNOOZE

Press SNOOZE / LIGHT to temporarily disable the alarm

for 8 minutes. or will blink while snooze is on.

BAROMETER

This product tracks fluctuations in barometric pressure

to provide the weather forecast, and the current and past

24 hours barometric pressure history measurements are

recorded by the main (indoor) unit.

VIEW BAROMETER AREA

Press SELECT to navigate to the Barometer Area.

If is NOT shown, press MODE.

BAR988HG English R5 OP 8/20/04, 11:25 AM16

Black

EN

17

Barometric data is shown in 2 areas at the bottom of the

display. The upper area shows a 24-hour bar chart.

The lower area shows current and historical readings.

SELECT MEASUREMENT UNIT

Slide the mb / inHg switch (in the clock battery

compartment), to change the display unit.

VIEW BAROMETER HISTORY

Navigate to the Barometer Area. Then press HISTORY

repeatedly to scroll through the measurements. The

number shown in the HR box indicates how long ago

each measurement was taken (e.g. 2 hours ago, 3 hours

ago, etc.).

BAR CHART DISPLAY

The bar chart visually shows atmospheric changes from

the current hour (0) to 24 hours prior (-24).

SET ALTITUDE

Set the altitude to match how far above or below sea

level you are living. This ensures that the barometric

pressure readings are accurate.

1. Navigate to the Barometer Area.

2. Press and hold HISTORY for 2 seconds.

BAR988HG English R5 OP 8/20/04, 11:25 AM17

Black

EN

18

3. Press UP or DOWN to set the altitude in 10-metre

increments (-100m to 2500m).

4. Press HISTORY to confirm.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather

within a 30-50 km (19-31 mile) radius. The forecast is

based on barometric pressure trend readings.

The top area shows an animated icon indicating the

forecasted weather.

WEATHER FORECAST ICONS

The night time icon displays from 6 PM to 6 AM.

When the Channel 1 sensor records a temperature of

2°C (35.6°F) or lower, the RAINY icon becomes SNOWY.

UV MEASUREMENT

The UVR138 Ultra-Violet Radiation Sensor is included

with the BAR986HG and is available as an optional item

for the BAR988HG. The UV sensor gives you the

following information at your fingertips:

• 10-hour Ultra-Violet Index (UVI) record.

• Automatic calculation of acceptable UV exposure

times based on pre-set user profiles (4 users

maximum).

ICON DESCRIPTION

Clear

Day / Night

Partly cloudy

Day / Night

ICON DESCRIPTION

Cloudy

Rainy

Snowy

NOTE

BAR988HG English R5 OP 8/20/04, 11:25 AM18

Black

EN

19

• UVI Danger Alert when UV Index reaches unsafe

levels.

UV data is shown in the same area as the Barometer.

Press SELECT to navigate to the Barometer Area, then

press MODE to display the UV icon and data.

Refer to the UVR138 User Manual for more

information and see below to learn about the new

additional UV features.

NEW ADDITIONAL UV FEATURES

UV EXPOSURE TIME COUNTDOWN

To set the exposure time countdown you need set to the

Skin Type and Sun Protection Factor (SPF) as follows:

1. Press SELECT to navigate to the Barometer Area,

then press MODE to select the UV display.

NOTE

2. Press CHANNEL to select user 1-4.

3. Press and hold MODE for 2 seconds to enter the

Skin Type Setting Mode of the selected user.

4. Press UP or DOWN to choose 1 of the 4 skin type

settings. Then press MODE to confirm and enter the

SPF Set Up Mode.

5. Press UP or DOWN to increase or decrease the SPF

value. Then press MODE to confirm and enter the

UV Exposure Time Countdown Setting Mode.

6. Press UP or DOWN to enable or disable countdown.

Press MODE to exit the UV Exposure Time

Countdown Mode and start the exposure time

countdown. The remaining user UV exposure time

will display and the will flash.

7. When the countdown has reached "0", an alarm will

sound for 2 minutes. Press any button to turn the

alarm off. The icon will flash for 2 minutes even

if you have stopped the alarm sound.

MAXIMUM / MINIMUM MEMORY FOR UVI

To view the maximum and minimum memory for UVI:

1. Press SELECT to navigate to the Barometer Area.

2. Press MODE to select the UV display.

3. Press MEMORY to show maximum, minimum and

current UVI readings.

4. Press and hold MEMORY for 2 seconds to clear the

UVI memory.

BAR988HG English R5 OP 8/20/04, 11:25 AM19

Black

La pagina sta caricando ...

Oregon Scientific BAR986HG Manuale utente

Oregon Scientific BAR986HG Manuale utente

in altre lingue

Documenti correlati